Changes in v16:
- Fix typo in max3191x patch ('offset' to 'bit' in bitmap_set_value8)
While adding GPIO get_multiple/set_multiple callback support for various
drivers, I noticed a pattern of looping manifesting that would be useful
standardized as a macro.
This patchset introduces the for_each_set_clump8 macro and utilizes it
in several GPIO drivers. The for_each_set_clump macro8 facilitates a
for-loop syntax that iterates over a memory region entire groups of set
bits at a time.
For example, suppose you would like to iterate over a 32-bit integer 8
bits at a time, skipping over 8-bit groups with no set bit, where
XXXXXXXX represents the current 8-bit group:
Example: 10111110 00000000 11111111 00110011
First loop: 10111110 00000000 11111111 XXXXXXXX
Second loop: 10111110 00000000 XXXXXXXX 00110011
Third loop: XXXXXXXX 00000000 11111111 00110011
Each iteration of the loop returns the next 8-bit group that has at
least one set bit.
The for_each_set_clump8 macro has four parameters:
* start: set to the bit offset of the current clump
* clump: set to the current clump value
* bits: bitmap to search within
* size: bitmap size in number of bits
In this version of the patchset, the for_each_set_clump macro has been
reimplemented and simplified based on the suggestions provided by Rasmus
Villemoes and Andy Shevchenko in the version 4 submission.
In particular, the function of the for_each_set_clump macro has been
restricted to handle only 8-bit clumps; the drivers that use the
for_each_set_clump macro only handle 8-bit ports so a generic
for_each_set_clump implementation is not necessary. Thus, a solution for
large clumps (i.e. those larger than the width of a bitmap word) can be
postponed until a driver appears that actually requires such a generic
for_each_set_clump implementation.
For what it's worth, a semi-generic for_each_set_clump (i.e. for clumps
smaller than the width of a bitmap word) can be implemented by simply
replacing the hardcoded '8' and '0xFF' instances with respective
variables. I have not yet had a need for such an implementation, and
since it falls short of a true generic for_each_set_clump function, I
have decided to forgo such an implementation for now.
In addition, the bitmap_get_value8 and bitmap_set_value8 functions are
introduced to get and set 8-bit values respectively. Their use is based
on the behavior suggested in the patchset version 4 review.
William Breathitt Gray (14):
bitops: Introduce the for_each_set_clump8 macro
lib/test_bitmap.c: Add for_each_set_clump8 test cases
gpio: 104-dio-48e: Utilize for_each_set_clump8 macro
gpio: 104-idi-48: Utilize for_each_set_clump8 macro
gpio: gpio-mm: Utilize for_each_set_clump8 macro
gpio: ws16c48: Utilize for_each_set_clump8 macro
gpio: pci-idio-16: Utilize for_each_set_clump8 macro
gpio: pcie-idio-24: Utilize for_each_set_clump8 macro
gpio: uniphier: Utilize for_each_set_clump8 macro
gpio: 74x164: Utilize the for_each_set_clump8 macro
thermal: intel: intel_soc_dts_iosf: Utilize for_each_set_clump8 macro
gpio: pisosr: Utilize the for_each_set_clump8 macro
gpio: max3191x: Utilize the for_each_set_clump8 macro
gpio: pca953x: Utilize the for_each_set_clump8 macro
drivers/gpio/gpio-104-dio-48e.c | 73 ++++----------
drivers/gpio/gpio-104-idi-48.c | 36 ++-----
drivers/gpio/gpio-74x164.c | 19 ++--
drivers/gpio/gpio-gpio-mm.c | 73 ++++----------
drivers/gpio/gpio-max3191x.c | 19 ++--
drivers/gpio/gpio-pca953x.c | 17 ++--
drivers/gpio/gpio-pci-idio-16.c | 75 +++++---------
drivers/gpio/gpio-pcie-idio-24.c | 109 ++++++++-------------
drivers/gpio/gpio-pisosr.c | 12 +--
drivers/gpio/gpio-uniphier.c | 16 ++-
drivers/gpio/gpio-ws16c48.c | 73 ++++----------
drivers/thermal/intel/intel_soc_dts_iosf.c | 29 +++---
drivers/thermal/intel/intel_soc_dts_iosf.h | 2 -
include/asm-generic/bitops/find.h | 50 ++++++++++
include/linux/bitops.h | 5 +
lib/find_bit.c | 14 +++
lib/test_bitmap.c | 65 ++++++++++++
17 files changed, 325 insertions(+), 362 deletions(-)
base-commit: 8c550e94b8835170593169a45b5ba30d3fc72a70
--
2.23.0
The introduction of the for_each_set_clump8 macro warrants test cases to
verify the implementation. This patch adds test case checks for whether
an out-of-bounds clump index is returned, a zero clump is returned, or
the returned clump value differs from the expected clump value.
Cc: Rasmus Villemoes <[email protected]>
Acked-by: Andrew Morton <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: William Breathitt Gray <[email protected]>
---
lib/test_bitmap.c | 65 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 65 insertions(+)
diff --git a/lib/test_bitmap.c b/lib/test_bitmap.c
index 51a98f7ee79e..dc167c13eb39 100644
--- a/lib/test_bitmap.c
+++ b/lib/test_bitmap.c
@@ -92,6 +92,36 @@ __check_eq_u32_array(const char *srcfile, unsigned int line,
return true;
}
+static bool __init __check_eq_clump8(const char *srcfile, unsigned int line,
+ const unsigned int offset,
+ const unsigned int size,
+ const unsigned char *const clump_exp,
+ const unsigned long *const clump)
+{
+ unsigned long exp;
+
+ if (offset >= size) {
+ pr_warn("[%s:%u] bit offset for clump out-of-bounds: expected less than %u, got %u\n",
+ srcfile, line, size, offset);
+ return false;
+ }
+
+ exp = clump_exp[offset / 8];
+ if (!exp) {
+ pr_warn("[%s:%u] bit offset for zero clump: expected nonzero clump, got bit offset %u with clump value 0",
+ srcfile, line, offset);
+ return false;
+ }
+
+ if (*clump != exp) {
+ pr_warn("[%s:%u] expected clump value of 0x%lX, got clump value of 0x%lX",
+ srcfile, line, exp, *clump);
+ return false;
+ }
+
+ return true;
+}
+
#define __expect_eq(suffix, ...) \
({ \
int result = 0; \
@@ -108,6 +138,7 @@ __check_eq_u32_array(const char *srcfile, unsigned int line,
#define expect_eq_bitmap(...) __expect_eq(bitmap, ##__VA_ARGS__)
#define expect_eq_pbl(...) __expect_eq(pbl, ##__VA_ARGS__)
#define expect_eq_u32_array(...) __expect_eq(u32_array, ##__VA_ARGS__)
+#define expect_eq_clump8(...) __expect_eq(clump8, ##__VA_ARGS__)
static void __init test_zero_clear(void)
{
@@ -404,6 +435,39 @@ static void noinline __init test_mem_optimisations(void)
}
}
+static const unsigned char clump_exp[] __initconst = {
+ 0x01, /* 1 bit set */
+ 0x02, /* non-edge 1 bit set */
+ 0x00, /* zero bits set */
+ 0x38, /* 3 bits set across 4-bit boundary */
+ 0x38, /* Repeated clump */
+ 0x0F, /* 4 bits set */
+ 0xFF, /* all bits set */
+ 0x05, /* non-adjacent 2 bits set */
+};
+
+static void __init test_for_each_set_clump8(void)
+{
+#define CLUMP_EXP_NUMBITS 64
+ DECLARE_BITMAP(bits, CLUMP_EXP_NUMBITS);
+ unsigned int start;
+ unsigned long clump;
+
+ /* set bitmap to test case */
+ bitmap_zero(bits, CLUMP_EXP_NUMBITS);
+ bitmap_set(bits, 0, 1); /* 0x01 */
+ bitmap_set(bits, 9, 1); /* 0x02 */
+ bitmap_set(bits, 27, 3); /* 0x28 */
+ bitmap_set(bits, 35, 3); /* 0x28 */
+ bitmap_set(bits, 40, 4); /* 0x0F */
+ bitmap_set(bits, 48, 8); /* 0xFF */
+ bitmap_set(bits, 56, 1); /* 0x05 - part 1 */
+ bitmap_set(bits, 58, 1); /* 0x05 - part 2 */
+
+ for_each_set_clump8(start, clump, bits, CLUMP_EXP_NUMBITS)
+ expect_eq_clump8(start, CLUMP_EXP_NUMBITS, clump_exp, &clump);
+}
+
static void __init selftest(void)
{
test_zero_clear();
@@ -413,6 +477,7 @@ static void __init selftest(void)
test_bitmap_parselist();
test_bitmap_parselist_user();
test_mem_optimisations();
+ test_for_each_set_clump8();
}
KSTM_MODULE_LOADERS(test_bitmap);
--
2.23.0
Replace verbose implementation in get_multiple/set_multiple callbacks
with for_each_set_clump8 macro to simplify code and improve clarity.
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: William Breathitt Gray <[email protected]>
---
drivers/gpio/gpio-104-dio-48e.c | 73 ++++++++++-----------------------
1 file changed, 21 insertions(+), 52 deletions(-)
diff --git a/drivers/gpio/gpio-104-dio-48e.c b/drivers/gpio/gpio-104-dio-48e.c
index a44fa8af5b0d..977f0f6eb1ba 100644
--- a/drivers/gpio/gpio-104-dio-48e.c
+++ b/drivers/gpio/gpio-104-dio-48e.c
@@ -175,46 +175,25 @@ static int dio48e_gpio_get(struct gpio_chip *chip, unsigned offset)
return !!(port_state & mask);
}
+static const size_t ports[] = { 0, 1, 2, 4, 5, 6 };
+
static int dio48e_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
unsigned long *bits)
{
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
- size_t i;
- static const size_t ports[] = { 0, 1, 2, 4, 5, 6 };
- const unsigned int gpio_reg_size = 8;
- unsigned int bits_offset;
- size_t word_index;
- unsigned int word_offset;
- unsigned long word_mask;
- const unsigned long port_mask = GENMASK(gpio_reg_size - 1, 0);
+ unsigned long offset;
+ unsigned long gpio_mask;
+ unsigned int port_addr;
unsigned long port_state;
/* clear bits array to a clean slate */
bitmap_zero(bits, chip->ngpio);
- /* get bits are evaluated a gpio port register at a time */
- for (i = 0; i < ARRAY_SIZE(ports); i++) {
- /* gpio offset in bits array */
- bits_offset = i * gpio_reg_size;
-
- /* word index for bits array */
- word_index = BIT_WORD(bits_offset);
-
- /* gpio offset within current word of bits array */
- word_offset = bits_offset % BITS_PER_LONG;
-
- /* mask of get bits for current gpio within current word */
- word_mask = mask[word_index] & (port_mask << word_offset);
- if (!word_mask) {
- /* no get bits in this port so skip to next one */
- continue;
- }
-
- /* read bits from current gpio port */
- port_state = inb(dio48egpio->base + ports[i]);
+ for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
+ port_addr = dio48egpio->base + ports[offset / 8];
+ port_state = inb(port_addr) & gpio_mask;
- /* store acquired bits at respective bits array offset */
- bits[word_index] |= (port_state << word_offset) & word_mask;
+ bitmap_set_value8(bits, port_state, offset);
}
return 0;
@@ -244,37 +223,27 @@ static void dio48e_gpio_set_multiple(struct gpio_chip *chip,
unsigned long *mask, unsigned long *bits)
{
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
- unsigned int i;
- const unsigned int gpio_reg_size = 8;
- unsigned int port;
- unsigned int out_port;
- unsigned int bitmask;
+ unsigned long offset;
+ unsigned long gpio_mask;
+ size_t index;
+ unsigned int port_addr;
+ unsigned long bitmask;
unsigned long flags;
- /* set bits are evaluated a gpio register size at a time */
- for (i = 0; i < chip->ngpio; i += gpio_reg_size) {
- /* no more set bits in this mask word; skip to the next word */
- if (!mask[BIT_WORD(i)]) {
- i = (BIT_WORD(i) + 1) * BITS_PER_LONG - gpio_reg_size;
- continue;
- }
+ for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
+ index = offset / 8;
+ port_addr = dio48egpio->base + ports[index];
- port = i / gpio_reg_size;
- out_port = (port > 2) ? port + 1 : port;
- bitmask = mask[BIT_WORD(i)] & bits[BIT_WORD(i)];
+ bitmask = bitmap_get_value8(bits, offset) & gpio_mask;
raw_spin_lock_irqsave(&dio48egpio->lock, flags);
/* update output state data and set device gpio register */
- dio48egpio->out_state[port] &= ~mask[BIT_WORD(i)];
- dio48egpio->out_state[port] |= bitmask;
- outb(dio48egpio->out_state[port], dio48egpio->base + out_port);
+ dio48egpio->out_state[index] &= ~gpio_mask;
+ dio48egpio->out_state[index] |= bitmask;
+ outb(dio48egpio->out_state[index], port_addr);
raw_spin_unlock_irqrestore(&dio48egpio->lock, flags);
-
- /* prepare for next gpio register set */
- mask[BIT_WORD(i)] >>= gpio_reg_size;
- bits[BIT_WORD(i)] >>= gpio_reg_size;
}
}
--
2.23.0
Replace verbose implementation in set_multiple callback with
for_each_set_clump8 macro to simplify code and improve clarity. An
improvement in this case is that banks that are not masked will now be
skipped.
Cc: Masahiro Yamada <[email protected]>
Signed-off-by: William Breathitt Gray <[email protected]>
---
drivers/gpio/gpio-uniphier.c | 16 ++++++----------
1 file changed, 6 insertions(+), 10 deletions(-)
diff --git a/drivers/gpio/gpio-uniphier.c b/drivers/gpio/gpio-uniphier.c
index 93cdcc41e9fb..3e4b15d0231e 100644
--- a/drivers/gpio/gpio-uniphier.c
+++ b/drivers/gpio/gpio-uniphier.c
@@ -15,9 +15,6 @@
#include <linux/spinlock.h>
#include <dt-bindings/gpio/uniphier-gpio.h>
-#define UNIPHIER_GPIO_BANK_MASK \
- GENMASK((UNIPHIER_GPIO_LINES_PER_BANK) - 1, 0)
-
#define UNIPHIER_GPIO_IRQ_MAX_NUM 24
#define UNIPHIER_GPIO_PORT_DATA 0x0 /* data */
@@ -147,15 +144,14 @@ static void uniphier_gpio_set(struct gpio_chip *chip,
static void uniphier_gpio_set_multiple(struct gpio_chip *chip,
unsigned long *mask, unsigned long *bits)
{
- unsigned int bank, shift, bank_mask, bank_bits;
- int i;
+ unsigned long i;
+ unsigned long bank_mask;
+ unsigned long bank;
+ unsigned long bank_bits;
- for (i = 0; i < chip->ngpio; i += UNIPHIER_GPIO_LINES_PER_BANK) {
+ for_each_set_clump8(i, bank_mask, mask, chip->ngpio) {
bank = i / UNIPHIER_GPIO_LINES_PER_BANK;
- shift = i % BITS_PER_LONG;
- bank_mask = (mask[BIT_WORD(i)] >> shift) &
- UNIPHIER_GPIO_BANK_MASK;
- bank_bits = bits[BIT_WORD(i)] >> shift;
+ bank_bits = bitmap_get_value8(bits, i);
uniphier_gpio_bank_write(chip, bank, UNIPHIER_GPIO_PORT_DATA,
bank_mask, bank_bits);
--
2.23.0
Replace verbose implementation in get_multiple callback with
for_each_set_clump8 macro to simplify code and improve clarity.
Cc: Morten Hein Tiljeset <[email protected]>
Cc: Sean Nyekjaer <[email protected]>
Signed-off-by: William Breathitt Gray <[email protected]>
---
drivers/gpio/gpio-pisosr.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/gpio/gpio-pisosr.c b/drivers/gpio/gpio-pisosr.c
index f809a5a8e9eb..9ab2c044ef52 100644
--- a/drivers/gpio/gpio-pisosr.c
+++ b/drivers/gpio/gpio-pisosr.c
@@ -96,16 +96,16 @@ static int pisosr_gpio_get_multiple(struct gpio_chip *chip,
unsigned long *mask, unsigned long *bits)
{
struct pisosr_gpio *gpio = gpiochip_get_data(chip);
- unsigned int nbytes = DIV_ROUND_UP(chip->ngpio, 8);
- unsigned int i, j;
+ unsigned long offset;
+ unsigned long gpio_mask;
+ unsigned long buffer_state;
pisosr_gpio_refresh(gpio);
bitmap_zero(bits, chip->ngpio);
- for (i = 0; i < nbytes; i++) {
- j = i / sizeof(unsigned long);
- bits[j] |= ((unsigned long) gpio->buffer[i])
- << (8 * (i % sizeof(unsigned long)));
+ for_each_set_clump8(offset, gpio_mask, mask, chip->ngpio) {
+ buffer_state = gpio->buffer[offset / 8] & gpio_mask;
+ bitmap_set_value8(bits, buffer_state, offset);
}
return 0;
--
2.23.0
Replace verbose implementation in set_multiple callback with
for_each_set_clump8 macro to simplify code and improve clarity.
Cc: Phil Reid <[email protected]>
Signed-off-by: William Breathitt Gray <[email protected]>
---
drivers/gpio/gpio-pca953x.c | 17 +++++++----------
1 file changed, 7 insertions(+), 10 deletions(-)
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index de5d1383f28d..10b669b8f27d 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -10,6 +10,7 @@
#include <linux/acpi.h>
#include <linux/bits.h>
+#include <linux/bitops.h>
#include <linux/gpio/driver.h>
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
@@ -456,7 +457,8 @@ static void pca953x_gpio_set_multiple(struct gpio_chip *gc,
unsigned long *mask, unsigned long *bits)
{
struct pca953x_chip *chip = gpiochip_get_data(gc);
- unsigned int bank_mask, bank_val;
+ unsigned long offset;
+ unsigned long bank_mask;
int bank;
u8 reg_val[MAX_BANK];
int ret;
@@ -466,15 +468,10 @@ static void pca953x_gpio_set_multiple(struct gpio_chip *gc,
if (ret)
goto exit;
- for (bank = 0; bank < NBANK(chip); bank++) {
- bank_mask = mask[bank / sizeof(*mask)] >>
- ((bank % sizeof(*mask)) * 8);
- if (bank_mask) {
- bank_val = bits[bank / sizeof(*bits)] >>
- ((bank % sizeof(*bits)) * 8);
- bank_val &= bank_mask;
- reg_val[bank] = (reg_val[bank] & ~bank_mask) | bank_val;
- }
+ for_each_set_clump8(offset, bank_mask, mask, gc->ngpio) {
+ bank = offset / 8;
+ reg_val[bank] &= ~bank_mask;
+ reg_val[bank] |= bitmap_get_value8(bits, offset) & bank_mask;
}
pca953x_write_regs(chip, chip->regs->output, reg_val);
--
2.23.0
Replace verbose implementation in get_multiple callback with
for_each_set_clump8 macro to simplify code and improve clarity.
Cc: Mathias Duckeck <[email protected]>
Cc: Lukas Wunner <[email protected]>
Signed-off-by: William Breathitt Gray <[email protected]>
---
drivers/gpio/gpio-max3191x.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/gpio/gpio-max3191x.c b/drivers/gpio/gpio-max3191x.c
index 4b4b2ceb82fc..0242c6187bf5 100644
--- a/drivers/gpio/gpio-max3191x.c
+++ b/drivers/gpio/gpio-max3191x.c
@@ -31,6 +31,7 @@
*/
#include <linux/bitmap.h>
+#include <linux/bitops.h>
#include <linux/crc8.h>
#include <linux/gpio/consumer.h>
#include <linux/gpio/driver.h>
@@ -232,16 +233,20 @@ static int max3191x_get_multiple(struct gpio_chip *gpio, unsigned long *mask,
unsigned long *bits)
{
struct max3191x_chip *max3191x = gpiochip_get_data(gpio);
- int ret, bit = 0, wordlen = max3191x_wordlen(max3191x);
+ const unsigned int wordlen = max3191x_wordlen(max3191x);
+ int ret;
+ unsigned long bit;
+ unsigned long gpio_mask;
+ unsigned long in;
mutex_lock(&max3191x->lock);
ret = max3191x_readout_locked(max3191x);
if (ret)
goto out_unlock;
- while ((bit = find_next_bit(mask, gpio->ngpio, bit)) != gpio->ngpio) {
+ bitmap_zero(bits, gpio->ngpio);
+ for_each_set_clump8(bit, gpio_mask, mask, gpio->ngpio) {
unsigned int chipnum = bit / MAX3191X_NGPIO;
- unsigned long in, shift, index;
if (max3191x_chip_is_faulting(max3191x, chipnum)) {
ret = -EIO;
@@ -249,12 +254,8 @@ static int max3191x_get_multiple(struct gpio_chip *gpio, unsigned long *mask,
}
in = ((u8 *)max3191x->xfer.rx_buf)[chipnum * wordlen];
- shift = round_down(bit % BITS_PER_LONG, MAX3191X_NGPIO);
- index = bit / BITS_PER_LONG;
- bits[index] &= ~(mask[index] & (0xff << shift));
- bits[index] |= mask[index] & (in << shift); /* copy bits */
-
- bit = (chipnum + 1) * MAX3191X_NGPIO; /* go to next chip */
+ in &= gpio_mask;
+ bitmap_set_value8(bits, in, bit);
}
out_unlock:
--
2.23.0
Utilize for_each_set_clump8 macro, and the bitmap_set_value8 and
bitmap_get_value8 functions, where appropriate. In addition, remove the
now unnecessary temp_mask and temp_shift members of the
intel_soc_dts_sensor_entry structure.
Suggested-by: Andy Shevchenko <[email protected]>
Tested-by: Andy Shevchenko <[email protected]>
Signed-off-by: William Breathitt Gray <[email protected]>
---
drivers/thermal/intel/intel_soc_dts_iosf.c | 29 +++++++++++++---------
drivers/thermal/intel/intel_soc_dts_iosf.h | 2 --
2 files changed, 17 insertions(+), 14 deletions(-)
diff --git a/drivers/thermal/intel/intel_soc_dts_iosf.c b/drivers/thermal/intel/intel_soc_dts_iosf.c
index 5716b62e0f73..901f64bb5b9c 100644
--- a/drivers/thermal/intel/intel_soc_dts_iosf.c
+++ b/drivers/thermal/intel/intel_soc_dts_iosf.c
@@ -6,6 +6,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/bitops.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
@@ -102,6 +103,7 @@ static int update_trip_temp(struct intel_soc_dts_sensor_entry *dts,
{
int status;
u32 temp_out;
+ unsigned long update_ptps;
u32 out;
u32 store_ptps;
u32 store_ptmc;
@@ -120,8 +122,9 @@ static int update_trip_temp(struct intel_soc_dts_sensor_entry *dts,
if (status)
return status;
- out = (store_ptps & ~(0xFF << (thres_index * 8)));
- out |= (temp_out & 0xFF) << (thres_index * 8);
+ update_ptps = store_ptps;
+ bitmap_set_value8(&update_ptps, temp_out & 0xFF, thres_index * 8);
+ out = update_ptps;
status = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
SOC_DTS_OFFSET_PTPS, out);
if (status)
@@ -223,6 +226,7 @@ static int sys_get_curr_temp(struct thermal_zone_device *tzd,
u32 out;
struct intel_soc_dts_sensor_entry *dts;
struct intel_soc_dts_sensors *sensors;
+ unsigned long temp_raw;
dts = tzd->devdata;
sensors = dts->sensors;
@@ -231,7 +235,8 @@ static int sys_get_curr_temp(struct thermal_zone_device *tzd,
if (status)
return status;
- out = (out & dts->temp_mask) >> dts->temp_shift;
+ temp_raw = out;
+ out = bitmap_get_value8(&temp_raw, dts->id * 8);
out -= SOC_DTS_TJMAX_ENCODING;
*temp = sensors->tj_max - out * 1000;
@@ -281,10 +286,13 @@ static int add_dts_thermal_zone(int id, struct intel_soc_dts_sensor_entry *dts,
{
char name[10];
int trip_count = 0;
+ int writable_trip_count = 0;
int trip_mask = 0;
u32 store_ptps;
int ret;
- int i;
+ unsigned long i;
+ unsigned long trip;
+ unsigned long ptps;
/* Store status to restor on exit */
ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
@@ -293,11 +301,10 @@ static int add_dts_thermal_zone(int id, struct intel_soc_dts_sensor_entry *dts,
goto err_ret;
dts->id = id;
- dts->temp_mask = 0x00FF << (id * 8);
- dts->temp_shift = id * 8;
if (notification_support) {
trip_count = min(SOC_MAX_DTS_TRIPS, trip_cnt);
- trip_mask = BIT(trip_count - read_only_trip_cnt) - 1;
+ writable_trip_count = trip_count - read_only_trip_cnt;
+ trip_mask = GENMASK(writable_trip_count - 1, 0);
}
/* Check if the writable trip we provide is not used by BIOS */
@@ -306,11 +313,9 @@ static int add_dts_thermal_zone(int id, struct intel_soc_dts_sensor_entry *dts,
if (ret)
trip_mask = 0;
else {
- for (i = 0; i < trip_count; ++i) {
- if (trip_mask & BIT(i))
- if (store_ptps & (0xff << (i * 8)))
- trip_mask &= ~BIT(i);
- }
+ ptps = store_ptps;
+ for_each_set_clump8(i, trip, &ptps, writable_trip_count * 8)
+ trip_mask &= ~BIT(i / 8);
}
dts->trip_mask = trip_mask;
dts->trip_count = trip_count;
diff --git a/drivers/thermal/intel/intel_soc_dts_iosf.h b/drivers/thermal/intel/intel_soc_dts_iosf.h
index adfb09af33fc..c54945748200 100644
--- a/drivers/thermal/intel/intel_soc_dts_iosf.h
+++ b/drivers/thermal/intel/intel_soc_dts_iosf.h
@@ -24,8 +24,6 @@ struct intel_soc_dts_sensors;
struct intel_soc_dts_sensor_entry {
int id;
- u32 temp_mask;
- u32 temp_shift;
u32 store_status;
u32 trip_mask;
u32 trip_count;
--
2.23.0
Replace verbose implementation in get_multiple/set_multiple callbacks
with for_each_set_clump8 macro to simplify code and improve clarity.
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: William Breathitt Gray <[email protected]>
---
drivers/gpio/gpio-pcie-idio-24.c | 109 ++++++++++++-------------------
1 file changed, 40 insertions(+), 69 deletions(-)
diff --git a/drivers/gpio/gpio-pcie-idio-24.c b/drivers/gpio/gpio-pcie-idio-24.c
index 52f1647a46fd..924ec916b358 100644
--- a/drivers/gpio/gpio-pcie-idio-24.c
+++ b/drivers/gpio/gpio-pcie-idio-24.c
@@ -198,52 +198,34 @@ static int idio_24_gpio_get_multiple(struct gpio_chip *chip,
unsigned long *mask, unsigned long *bits)
{
struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
- size_t i;
- const unsigned int gpio_reg_size = 8;
- unsigned int bits_offset;
- size_t word_index;
- unsigned int word_offset;
- unsigned long word_mask;
- const unsigned long port_mask = GENMASK(gpio_reg_size - 1, 0);
- unsigned long port_state;
+ unsigned long offset;
+ unsigned long gpio_mask;
void __iomem *ports[] = {
&idio24gpio->reg->out0_7, &idio24gpio->reg->out8_15,
&idio24gpio->reg->out16_23, &idio24gpio->reg->in0_7,
&idio24gpio->reg->in8_15, &idio24gpio->reg->in16_23,
};
+ size_t index;
+ unsigned long port_state;
const unsigned long out_mode_mask = BIT(1);
/* clear bits array to a clean slate */
bitmap_zero(bits, chip->ngpio);
- /* get bits are evaluated a gpio port register at a time */
- for (i = 0; i < ARRAY_SIZE(ports) + 1; i++) {
- /* gpio offset in bits array */
- bits_offset = i * gpio_reg_size;
-
- /* word index for bits array */
- word_index = BIT_WORD(bits_offset);
-
- /* gpio offset within current word of bits array */
- word_offset = bits_offset % BITS_PER_LONG;
-
- /* mask of get bits for current gpio within current word */
- word_mask = mask[word_index] & (port_mask << word_offset);
- if (!word_mask) {
- /* no get bits in this port so skip to next one */
- continue;
- }
+ for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
+ index = offset / 8;
/* read bits from current gpio port (port 6 is TTL GPIO) */
- if (i < 6)
- port_state = ioread8(ports[i]);
+ if (index < 6)
+ port_state = ioread8(ports[index]);
else if (ioread8(&idio24gpio->reg->ctl) & out_mode_mask)
port_state = ioread8(&idio24gpio->reg->ttl_out0_7);
else
port_state = ioread8(&idio24gpio->reg->ttl_in0_7);
- /* store acquired bits at respective bits array offset */
- bits[word_index] |= (port_state << word_offset) & word_mask;
+ port_state &= gpio_mask;
+
+ bitmap_set_value8(bits, port_state, offset);
}
return 0;
@@ -294,59 +276,48 @@ static void idio_24_gpio_set_multiple(struct gpio_chip *chip,
unsigned long *mask, unsigned long *bits)
{
struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
- size_t i;
- unsigned long bits_offset;
+ unsigned long offset;
unsigned long gpio_mask;
- const unsigned int gpio_reg_size = 8;
- const unsigned long port_mask = GENMASK(gpio_reg_size, 0);
- unsigned long flags;
- unsigned int out_state;
void __iomem *ports[] = {
&idio24gpio->reg->out0_7, &idio24gpio->reg->out8_15,
&idio24gpio->reg->out16_23
};
+ size_t index;
+ unsigned long bitmask;
+ unsigned long flags;
+ unsigned long out_state;
const unsigned long out_mode_mask = BIT(1);
- const unsigned int ttl_offset = 48;
- const size_t ttl_i = BIT_WORD(ttl_offset);
- const unsigned int word_offset = ttl_offset % BITS_PER_LONG;
- const unsigned long ttl_mask = (mask[ttl_i] >> word_offset) & port_mask;
- const unsigned long ttl_bits = (bits[ttl_i] >> word_offset) & ttl_mask;
-
- /* set bits are processed a gpio port register at a time */
- for (i = 0; i < ARRAY_SIZE(ports); i++) {
- /* gpio offset in bits array */
- bits_offset = i * gpio_reg_size;
-
- /* check if any set bits for current port */
- gpio_mask = (*mask >> bits_offset) & port_mask;
- if (!gpio_mask) {
- /* no set bits for this port so move on to next port */
- continue;
- }
- raw_spin_lock_irqsave(&idio24gpio->lock, flags);
+ for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
+ index = offset / 8;
- /* process output lines */
- out_state = ioread8(ports[i]) & ~gpio_mask;
- out_state |= (*bits >> bits_offset) & gpio_mask;
- iowrite8(out_state, ports[i]);
+ bitmask = bitmap_get_value8(bits, offset) & gpio_mask;
- raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
- }
+ raw_spin_lock_irqsave(&idio24gpio->lock, flags);
- /* check if setting TTL lines and if they are in output mode */
- if (!ttl_mask || !(ioread8(&idio24gpio->reg->ctl) & out_mode_mask))
- return;
+ /* read bits from current gpio port (port 6 is TTL GPIO) */
+ if (index < 6) {
+ out_state = ioread8(ports[index]);
+ } else if (ioread8(&idio24gpio->reg->ctl) & out_mode_mask) {
+ out_state = ioread8(&idio24gpio->reg->ttl_out0_7);
+ } else {
+ /* skip TTL GPIO if set for input */
+ raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
+ continue;
+ }
- /* handle TTL output */
- raw_spin_lock_irqsave(&idio24gpio->lock, flags);
+ /* set requested bit states */
+ out_state &= ~gpio_mask;
+ out_state |= bitmask;
- /* process output lines */
- out_state = ioread8(&idio24gpio->reg->ttl_out0_7) & ~ttl_mask;
- out_state |= ttl_bits;
- iowrite8(out_state, &idio24gpio->reg->ttl_out0_7);
+ /* write bits for current gpio port (port 6 is TTL GPIO) */
+ if (index < 6)
+ iowrite8(out_state, ports[index]);
+ else
+ iowrite8(out_state, &idio24gpio->reg->ttl_out0_7);
- raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
+ }
}
static void idio_24_irq_ack(struct irq_data *data)
--
2.23.0
Replace verbose implementation in get_multiple/set_multiple callbacks
with for_each_set_clump8 macro to simplify code and improve clarity.
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: William Breathitt Gray <[email protected]>
---
drivers/gpio/gpio-pci-idio-16.c | 75 ++++++++++++---------------------
1 file changed, 27 insertions(+), 48 deletions(-)
diff --git a/drivers/gpio/gpio-pci-idio-16.c b/drivers/gpio/gpio-pci-idio-16.c
index 5aa136a6a3e0..6c117e57078c 100644
--- a/drivers/gpio/gpio-pci-idio-16.c
+++ b/drivers/gpio/gpio-pci-idio-16.c
@@ -100,45 +100,23 @@ static int idio_16_gpio_get_multiple(struct gpio_chip *chip,
unsigned long *mask, unsigned long *bits)
{
struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip);
- size_t i;
- const unsigned int gpio_reg_size = 8;
- unsigned int bits_offset;
- size_t word_index;
- unsigned int word_offset;
- unsigned long word_mask;
- const unsigned long port_mask = GENMASK(gpio_reg_size - 1, 0);
- unsigned long port_state;
+ unsigned long offset;
+ unsigned long gpio_mask;
void __iomem *ports[] = {
&idio16gpio->reg->out0_7, &idio16gpio->reg->out8_15,
&idio16gpio->reg->in0_7, &idio16gpio->reg->in8_15,
};
+ void __iomem *port_addr;
+ unsigned long port_state;
/* clear bits array to a clean slate */
bitmap_zero(bits, chip->ngpio);
- /* get bits are evaluated a gpio port register at a time */
- for (i = 0; i < ARRAY_SIZE(ports); i++) {
- /* gpio offset in bits array */
- bits_offset = i * gpio_reg_size;
-
- /* word index for bits array */
- word_index = BIT_WORD(bits_offset);
-
- /* gpio offset within current word of bits array */
- word_offset = bits_offset % BITS_PER_LONG;
-
- /* mask of get bits for current gpio within current word */
- word_mask = mask[word_index] & (port_mask << word_offset);
- if (!word_mask) {
- /* no get bits in this port so skip to next one */
- continue;
- }
+ for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
+ port_addr = ports[offset / 8];
+ port_state = ioread8(port_addr) & gpio_mask;
- /* read bits from current gpio port */
- port_state = ioread8(ports[i]);
-
- /* store acquired bits at respective bits array offset */
- bits[word_index] |= (port_state << word_offset) & word_mask;
+ bitmap_set_value8(bits, port_state, offset);
}
return 0;
@@ -178,30 +156,31 @@ static void idio_16_gpio_set_multiple(struct gpio_chip *chip,
unsigned long *mask, unsigned long *bits)
{
struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip);
+ unsigned long offset;
+ unsigned long gpio_mask;
+ void __iomem *ports[] = {
+ &idio16gpio->reg->out0_7, &idio16gpio->reg->out8_15,
+ };
+ size_t index;
+ void __iomem *port_addr;
+ unsigned long bitmask;
unsigned long flags;
- unsigned int out_state;
+ unsigned long out_state;
- raw_spin_lock_irqsave(&idio16gpio->lock, flags);
+ for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
+ index = offset / 8;
+ port_addr = ports[index];
- /* process output lines 0-7 */
- if (*mask & 0xFF) {
- out_state = ioread8(&idio16gpio->reg->out0_7) & ~*mask;
- out_state |= *mask & *bits;
- iowrite8(out_state, &idio16gpio->reg->out0_7);
- }
+ bitmask = bitmap_get_value8(bits, offset) & gpio_mask;
+
+ raw_spin_lock_irqsave(&idio16gpio->lock, flags);
- /* shift to next output line word */
- *mask >>= 8;
+ out_state = ioread8(port_addr) & ~gpio_mask;
+ out_state |= bitmask;
+ iowrite8(out_state, port_addr);
- /* process output lines 8-15 */
- if (*mask & 0xFF) {
- *bits >>= 8;
- out_state = ioread8(&idio16gpio->reg->out8_15) & ~*mask;
- out_state |= *mask & *bits;
- iowrite8(out_state, &idio16gpio->reg->out8_15);
+ raw_spin_unlock_irqrestore(&idio16gpio->lock, flags);
}
-
- raw_spin_unlock_irqrestore(&idio16gpio->lock, flags);
}
static void idio_16_irq_ack(struct irq_data *data)
--
2.23.0
Replace verbose implementation in get_multiple/set_multiple callbacks
with for_each_set_clump8 macro to simplify code and improve clarity.
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: William Breathitt Gray <[email protected]>
---
drivers/gpio/gpio-104-idi-48.c | 36 +++++++---------------------------
1 file changed, 7 insertions(+), 29 deletions(-)
diff --git a/drivers/gpio/gpio-104-idi-48.c b/drivers/gpio/gpio-104-idi-48.c
index ff53887bdaa8..bf67040cbbbb 100644
--- a/drivers/gpio/gpio-104-idi-48.c
+++ b/drivers/gpio/gpio-104-idi-48.c
@@ -85,42 +85,20 @@ static int idi_48_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
unsigned long *bits)
{
struct idi_48_gpio *const idi48gpio = gpiochip_get_data(chip);
- size_t i;
+ unsigned long offset;
+ unsigned long gpio_mask;
static const size_t ports[] = { 0, 1, 2, 4, 5, 6 };
- const unsigned int gpio_reg_size = 8;
- unsigned int bits_offset;
- size_t word_index;
- unsigned int word_offset;
- unsigned long word_mask;
- const unsigned long port_mask = GENMASK(gpio_reg_size - 1, 0);
+ unsigned int port_addr;
unsigned long port_state;
/* clear bits array to a clean slate */
bitmap_zero(bits, chip->ngpio);
- /* get bits are evaluated a gpio port register at a time */
- for (i = 0; i < ARRAY_SIZE(ports); i++) {
- /* gpio offset in bits array */
- bits_offset = i * gpio_reg_size;
+ for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
+ port_addr = idi48gpio->base + ports[offset / 8];
+ port_state = inb(port_addr) & gpio_mask;
- /* word index for bits array */
- word_index = BIT_WORD(bits_offset);
-
- /* gpio offset within current word of bits array */
- word_offset = bits_offset % BITS_PER_LONG;
-
- /* mask of get bits for current gpio within current word */
- word_mask = mask[word_index] & (port_mask << word_offset);
- if (!word_mask) {
- /* no get bits in this port so skip to next one */
- continue;
- }
-
- /* read bits from current gpio port */
- port_state = inb(idi48gpio->base + ports[i]);
-
- /* store acquired bits at respective bits array offset */
- bits[word_index] |= (port_state << word_offset) & word_mask;
+ bitmap_set_value8(bits, port_state, offset);
}
return 0;
--
2.23.0
This macro iterates for each 8-bit group of bits (clump) with set bits,
within a bitmap memory region. For each iteration, "start" is set to the
bit offset of the found clump, while the respective clump value is
stored to the location pointed by "clump". Additionally, the
bitmap_get_value8 and bitmap_set_value8 functions are introduced to
respectively get and set an 8-bit value in a bitmap memory region.
Suggested-by: Andy Shevchenko <[email protected]>
Suggested-by: Rasmus Villemoes <[email protected]>
Suggested-by: Lukas Wunner <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Linus Walleij <[email protected]>
Signed-off-by: William Breathitt Gray <[email protected]>
---
include/asm-generic/bitops/find.h | 50 +++++++++++++++++++++++++++++++
include/linux/bitops.h | 5 ++++
lib/find_bit.c | 14 +++++++++
3 files changed, 69 insertions(+)
diff --git a/include/asm-generic/bitops/find.h b/include/asm-generic/bitops/find.h
index 8a1ee10014de..5277e72882ff 100644
--- a/include/asm-generic/bitops/find.h
+++ b/include/asm-generic/bitops/find.h
@@ -80,4 +80,54 @@ extern unsigned long find_first_zero_bit(const unsigned long *addr,
#endif /* CONFIG_GENERIC_FIND_FIRST_BIT */
+/**
+ * bitmap_get_value8 - get an 8-bit value within a memory region
+ * @addr: address to the bitmap memory region
+ * @start: bit offset of the 8-bit value; must be a multiple of 8
+ *
+ * Returns the 8-bit value located at the @start bit offset within the @addr
+ * memory region.
+ */
+static inline unsigned long bitmap_get_value8(const unsigned long *addr,
+ unsigned long start)
+{
+ const size_t index = BIT_WORD(start);
+ const unsigned long offset = start % BITS_PER_LONG;
+
+ return (addr[index] >> offset) & 0xFF;
+}
+
+/**
+ * bitmap_set_value8 - set an 8-bit value within a memory region
+ * @addr: address to the bitmap memory region
+ * @value: the 8-bit value; values wider than 8 bits may clobber bitmap
+ * @start: bit offset of the 8-bit value; must be a multiple of 8
+ */
+static inline void bitmap_set_value8(unsigned long *addr, unsigned long value,
+ unsigned long start)
+{
+ const size_t index = BIT_WORD(start);
+ const unsigned long offset = start % BITS_PER_LONG;
+
+ addr[index] &= ~(0xFF << offset);
+ addr[index] |= value << offset;
+}
+
+/**
+ * find_next_clump8 - find next 8-bit clump with set bits in a memory region
+ * @clump: location to store copy of found clump
+ * @addr: address to base the search on
+ * @size: bitmap size in number of bits
+ * @offset: bit offset at which to start searching
+ *
+ * Returns the bit offset for the next set clump; the found clump value is
+ * copied to the location pointed by @clump. If no bits are set, returns @size.
+ */
+extern unsigned long find_next_clump8(unsigned long *clump,
+ const unsigned long *addr,
+ unsigned long size, unsigned long offset);
+
+#define find_first_clump8(clump, bits, size) \
+ find_next_clump8((clump), (bits), (size), 0)
+
#endif /*_ASM_GENERIC_BITOPS_FIND_H_ */
diff --git a/include/linux/bitops.h b/include/linux/bitops.h
index cf074bce3eb3..fb94a10f7853 100644
--- a/include/linux/bitops.h
+++ b/include/linux/bitops.h
@@ -40,6 +40,11 @@ extern unsigned long __sw_hweight64(__u64 w);
(bit) < (size); \
(bit) = find_next_zero_bit((addr), (size), (bit) + 1))
+#define for_each_set_clump8(start, clump, bits, size) \
+ for ((start) = find_first_clump8(&(clump), (bits), (size)); \
+ (start) < (size); \
+ (start) = find_next_clump8(&(clump), (bits), (size), (start) + 8))
+
static inline int get_bitmask_order(unsigned int count)
{
int order;
diff --git a/lib/find_bit.c b/lib/find_bit.c
index 5c51eb45178a..e35a76b291e6 100644
--- a/lib/find_bit.c
+++ b/lib/find_bit.c
@@ -214,3 +214,17 @@ EXPORT_SYMBOL(find_next_bit_le);
#endif
#endif /* __BIG_ENDIAN */
+
+unsigned long find_next_clump8(unsigned long *clump, const unsigned long *addr,
+ unsigned long size, unsigned long offset)
+{
+ offset = find_next_bit(addr, size, offset);
+ if (offset == size)
+ return size;
+
+ offset = round_down(offset, 8);
+ *clump = bitmap_get_value8(addr, offset);
+
+ return offset;
+}
+EXPORT_SYMBOL(find_next_clump8);
--
2.23.0
Replace verbose implementation in get_multiple/set_multiple callbacks
with for_each_set_clump8 macro to simplify code and improve clarity.
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: William Breathitt Gray <[email protected]>
---
drivers/gpio/gpio-ws16c48.c | 73 ++++++++++---------------------------
1 file changed, 20 insertions(+), 53 deletions(-)
diff --git a/drivers/gpio/gpio-ws16c48.c b/drivers/gpio/gpio-ws16c48.c
index e0ef66b6a237..51aaa5c17fce 100644
--- a/drivers/gpio/gpio-ws16c48.c
+++ b/drivers/gpio/gpio-ws16c48.c
@@ -126,42 +126,19 @@ static int ws16c48_gpio_get_multiple(struct gpio_chip *chip,
unsigned long *mask, unsigned long *bits)
{
struct ws16c48_gpio *const ws16c48gpio = gpiochip_get_data(chip);
- const unsigned int gpio_reg_size = 8;
- size_t i;
- const size_t num_ports = chip->ngpio / gpio_reg_size;
- unsigned int bits_offset;
- size_t word_index;
- unsigned int word_offset;
- unsigned long word_mask;
- const unsigned long port_mask = GENMASK(gpio_reg_size - 1, 0);
+ unsigned long offset;
+ unsigned long gpio_mask;
+ unsigned int port_addr;
unsigned long port_state;
/* clear bits array to a clean slate */
bitmap_zero(bits, chip->ngpio);
- /* get bits are evaluated a gpio port register at a time */
- for (i = 0; i < num_ports; i++) {
- /* gpio offset in bits array */
- bits_offset = i * gpio_reg_size;
+ for_each_set_clump8(offset, gpio_mask, mask, chip->ngpio) {
+ port_addr = ws16c48gpio->base + offset / 8;
+ port_state = inb(port_addr) & gpio_mask;
- /* word index for bits array */
- word_index = BIT_WORD(bits_offset);
-
- /* gpio offset within current word of bits array */
- word_offset = bits_offset % BITS_PER_LONG;
-
- /* mask of get bits for current gpio within current word */
- word_mask = mask[word_index] & (port_mask << word_offset);
- if (!word_mask) {
- /* no get bits in this port so skip to next one */
- continue;
- }
-
- /* read bits from current gpio port */
- port_state = inb(ws16c48gpio->base + i);
-
- /* store acquired bits at respective bits array offset */
- bits[word_index] |= (port_state << word_offset) & word_mask;
+ bitmap_set_value8(bits, port_state, offset);
}
return 0;
@@ -195,39 +172,29 @@ static void ws16c48_gpio_set_multiple(struct gpio_chip *chip,
unsigned long *mask, unsigned long *bits)
{
struct ws16c48_gpio *const ws16c48gpio = gpiochip_get_data(chip);
- unsigned int i;
- const unsigned int gpio_reg_size = 8;
- unsigned int port;
- unsigned int iomask;
- unsigned int bitmask;
+ unsigned long offset;
+ unsigned long gpio_mask;
+ size_t index;
+ unsigned int port_addr;
+ unsigned long bitmask;
unsigned long flags;
- /* set bits are evaluated a gpio register size at a time */
- for (i = 0; i < chip->ngpio; i += gpio_reg_size) {
- /* no more set bits in this mask word; skip to the next word */
- if (!mask[BIT_WORD(i)]) {
- i = (BIT_WORD(i) + 1) * BITS_PER_LONG - gpio_reg_size;
- continue;
- }
-
- port = i / gpio_reg_size;
+ for_each_set_clump8(offset, gpio_mask, mask, chip->ngpio) {
+ index = offset / 8;
+ port_addr = ws16c48gpio->base + index;
/* mask out GPIO configured for input */
- iomask = mask[BIT_WORD(i)] & ~ws16c48gpio->io_state[port];
- bitmask = iomask & bits[BIT_WORD(i)];
+ gpio_mask &= ~ws16c48gpio->io_state[index];
+ bitmask = bitmap_get_value8(bits, offset) & gpio_mask;
raw_spin_lock_irqsave(&ws16c48gpio->lock, flags);
/* update output state data and set device gpio register */
- ws16c48gpio->out_state[port] &= ~iomask;
- ws16c48gpio->out_state[port] |= bitmask;
- outb(ws16c48gpio->out_state[port], ws16c48gpio->base + port);
+ ws16c48gpio->out_state[index] &= ~gpio_mask;
+ ws16c48gpio->out_state[index] |= bitmask;
+ outb(ws16c48gpio->out_state[index], port_addr);
raw_spin_unlock_irqrestore(&ws16c48gpio->lock, flags);
-
- /* prepare for next gpio register set */
- mask[BIT_WORD(i)] >>= gpio_reg_size;
- bits[BIT_WORD(i)] >>= gpio_reg_size;
}
}
--
2.23.0
Replace verbose implementation in set_multiple callback with
for_each_set_clump8 macro to simplify code and improve clarity.
Suggested-by: Andy Shevchenko <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Phil Reid <[email protected]>
Signed-off-by: William Breathitt Gray <[email protected]>
---
drivers/gpio/gpio-74x164.c | 19 +++++++++----------
1 file changed, 9 insertions(+), 10 deletions(-)
diff --git a/drivers/gpio/gpio-74x164.c b/drivers/gpio/gpio-74x164.c
index e81307f9754e..05637d585152 100644
--- a/drivers/gpio/gpio-74x164.c
+++ b/drivers/gpio/gpio-74x164.c
@@ -6,6 +6,7 @@
* Copyright (C) 2010 Miguel Gaio <[email protected]>
*/
+#include <linux/bitops.h>
#include <linux/gpio/consumer.h>
#include <linux/gpio/driver.h>
#include <linux/module.h>
@@ -72,20 +73,18 @@ static void gen_74x164_set_multiple(struct gpio_chip *gc, unsigned long *mask,
unsigned long *bits)
{
struct gen_74x164_chip *chip = gpiochip_get_data(gc);
- unsigned int i, idx, shift;
- u8 bank, bankmask;
+ unsigned long offset;
+ unsigned long bankmask;
+ size_t bank;
+ unsigned long bitmask;
mutex_lock(&chip->lock);
- for (i = 0, bank = chip->registers - 1; i < chip->registers;
- i++, bank--) {
- idx = i / sizeof(*mask);
- shift = i % sizeof(*mask) * BITS_PER_BYTE;
- bankmask = mask[idx] >> shift;
- if (!bankmask)
- continue;
+ for_each_set_clump8(offset, bankmask, mask, chip->registers * 8) {
+ bank = chip->registers - 1 - offset / 8;
+ bitmask = bitmap_get_value8(bits, offset) & bankmask;
chip->buffer[bank] &= ~bankmask;
- chip->buffer[bank] |= bankmask & (bits[idx] >> shift);
+ chip->buffer[bank] |= bitmask;
}
__gen_74x164_write_config(chip);
mutex_unlock(&chip->lock);
--
2.23.0
Replace verbose implementation in get_multiple/set_multiple callbacks
with for_each_set_clump8 macro to simplify code and improve clarity.
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: William Breathitt Gray <[email protected]>
---
drivers/gpio/gpio-gpio-mm.c | 73 +++++++++++--------------------------
1 file changed, 21 insertions(+), 52 deletions(-)
diff --git a/drivers/gpio/gpio-gpio-mm.c b/drivers/gpio/gpio-gpio-mm.c
index 78a1db24e931..72196ea36358 100644
--- a/drivers/gpio/gpio-gpio-mm.c
+++ b/drivers/gpio/gpio-gpio-mm.c
@@ -164,46 +164,25 @@ static int gpiomm_gpio_get(struct gpio_chip *chip, unsigned int offset)
return !!(port_state & mask);
}
+static const size_t ports[] = { 0, 1, 2, 4, 5, 6 };
+
static int gpiomm_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
unsigned long *bits)
{
struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
- size_t i;
- static const size_t ports[] = { 0, 1, 2, 4, 5, 6 };
- const unsigned int gpio_reg_size = 8;
- unsigned int bits_offset;
- size_t word_index;
- unsigned int word_offset;
- unsigned long word_mask;
- const unsigned long port_mask = GENMASK(gpio_reg_size - 1, 0);
+ unsigned long offset;
+ unsigned long gpio_mask;
+ unsigned int port_addr;
unsigned long port_state;
/* clear bits array to a clean slate */
bitmap_zero(bits, chip->ngpio);
- /* get bits are evaluated a gpio port register at a time */
- for (i = 0; i < ARRAY_SIZE(ports); i++) {
- /* gpio offset in bits array */
- bits_offset = i * gpio_reg_size;
-
- /* word index for bits array */
- word_index = BIT_WORD(bits_offset);
-
- /* gpio offset within current word of bits array */
- word_offset = bits_offset % BITS_PER_LONG;
-
- /* mask of get bits for current gpio within current word */
- word_mask = mask[word_index] & (port_mask << word_offset);
- if (!word_mask) {
- /* no get bits in this port so skip to next one */
- continue;
- }
-
- /* read bits from current gpio port */
- port_state = inb(gpiommgpio->base + ports[i]);
+ for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
+ port_addr = gpiommgpio->base + ports[offset / 8];
+ port_state = inb(port_addr) & gpio_mask;
- /* store acquired bits at respective bits array offset */
- bits[word_index] |= (port_state << word_offset) & word_mask;
+ bitmap_set_value8(bits, port_state, offset);
}
return 0;
@@ -234,37 +213,27 @@ static void gpiomm_gpio_set_multiple(struct gpio_chip *chip,
unsigned long *mask, unsigned long *bits)
{
struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
- unsigned int i;
- const unsigned int gpio_reg_size = 8;
- unsigned int port;
- unsigned int out_port;
- unsigned int bitmask;
+ unsigned long offset;
+ unsigned long gpio_mask;
+ size_t index;
+ unsigned int port_addr;
+ unsigned long bitmask;
unsigned long flags;
- /* set bits are evaluated a gpio register size at a time */
- for (i = 0; i < chip->ngpio; i += gpio_reg_size) {
- /* no more set bits in this mask word; skip to the next word */
- if (!mask[BIT_WORD(i)]) {
- i = (BIT_WORD(i) + 1) * BITS_PER_LONG - gpio_reg_size;
- continue;
- }
+ for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
+ index = offset / 8;
+ port_addr = gpiommgpio->base + ports[index];
- port = i / gpio_reg_size;
- out_port = (port > 2) ? port + 1 : port;
- bitmask = mask[BIT_WORD(i)] & bits[BIT_WORD(i)];
+ bitmask = bitmap_get_value8(bits, offset) & gpio_mask;
spin_lock_irqsave(&gpiommgpio->lock, flags);
/* update output state data and set device gpio register */
- gpiommgpio->out_state[port] &= ~mask[BIT_WORD(i)];
- gpiommgpio->out_state[port] |= bitmask;
- outb(gpiommgpio->out_state[port], gpiommgpio->base + out_port);
+ gpiommgpio->out_state[index] &= ~gpio_mask;
+ gpiommgpio->out_state[index] |= bitmask;
+ outb(gpiommgpio->out_state[index], port_addr);
spin_unlock_irqrestore(&gpiommgpio->lock, flags);
-
- /* prepare for next gpio register set */
- mask[BIT_WORD(i)] >>= gpio_reg_size;
- bits[BIT_WORD(i)] >>= gpio_reg_size;
}
}
--
2.23.0
On Sun, Oct 06, 2019 at 11:10:58AM -0400, William Breathitt Gray wrote:
> This macro iterates for each 8-bit group of bits (clump) with set bits,
> within a bitmap memory region. For each iteration, "start" is set to the
> bit offset of the found clump, while the respective clump value is
> stored to the location pointed by "clump". Additionally, the
> bitmap_get_value8 and bitmap_set_value8 functions are introduced to
> respectively get and set an 8-bit value in a bitmap memory region.
Very much thank you for an update!
I have comments below.
> +/**
> + * bitmap_get_value8 - get an 8-bit value within a memory region
Since it's in find.h I would not collide with bitmap namespace.
How about
find_and_get_value8()
> + * @addr: address to the bitmap memory region
> + * @start: bit offset of the 8-bit value; must be a multiple of 8
> + *
> + * Returns the 8-bit value located at the @start bit offset within the @addr
> + * memory region.
> + */
> +static inline unsigned long bitmap_get_value8(const unsigned long *addr,
> + unsigned long start)
> +{
> + const size_t index = BIT_WORD(start);
> + const unsigned long offset = start % BITS_PER_LONG;
> +
> + return (addr[index] >> offset) & 0xFF;
> +}
> +
> +/**
> + * bitmap_set_value8 - set an 8-bit value within a memory region
find_and_set_value8()
?
> + * @addr: address to the bitmap memory region
> + * @value: the 8-bit value; values wider than 8 bits may clobber bitmap
> + * @start: bit offset of the 8-bit value; must be a multiple of 8
> + */
> +static inline void bitmap_set_value8(unsigned long *addr, unsigned long value,
> + unsigned long start)
> +{
> + const size_t index = BIT_WORD(start);
> + const unsigned long offset = start % BITS_PER_LONG;
> +
> + addr[index] &= ~(0xFF << offset);
> + addr[index] |= value << offset;
> +}
--
With Best Regards,
Andy Shevchenko
On Sun, Oct 06, 2019 at 11:11:07AM -0400, William Breathitt Gray wrote:
> Replace verbose implementation in set_multiple callback with
> for_each_set_clump8 macro to simplify code and improve clarity.
I can test it somewhat later.
> Suggested-by: Andy Shevchenko <[email protected]>
> Cc: Geert Uytterhoeven <[email protected]>
> Cc: Phil Reid <[email protected]>
> Signed-off-by: William Breathitt Gray <[email protected]>
> ---
> drivers/gpio/gpio-74x164.c | 19 +++++++++----------
> 1 file changed, 9 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/gpio/gpio-74x164.c b/drivers/gpio/gpio-74x164.c
> index e81307f9754e..05637d585152 100644
> --- a/drivers/gpio/gpio-74x164.c
> +++ b/drivers/gpio/gpio-74x164.c
> @@ -6,6 +6,7 @@
> * Copyright (C) 2010 Miguel Gaio <[email protected]>
> */
>
> +#include <linux/bitops.h>
> #include <linux/gpio/consumer.h>
> #include <linux/gpio/driver.h>
> #include <linux/module.h>
> @@ -72,20 +73,18 @@ static void gen_74x164_set_multiple(struct gpio_chip *gc, unsigned long *mask,
> unsigned long *bits)
> {
> struct gen_74x164_chip *chip = gpiochip_get_data(gc);
> - unsigned int i, idx, shift;
> - u8 bank, bankmask;
> + unsigned long offset;
> + unsigned long bankmask;
> + size_t bank;
> + unsigned long bitmask;
>
> mutex_lock(&chip->lock);
> - for (i = 0, bank = chip->registers - 1; i < chip->registers;
> - i++, bank--) {
> - idx = i / sizeof(*mask);
> - shift = i % sizeof(*mask) * BITS_PER_BYTE;
> - bankmask = mask[idx] >> shift;
> - if (!bankmask)
> - continue;
> + for_each_set_clump8(offset, bankmask, mask, chip->registers * 8) {
> + bank = chip->registers - 1 - offset / 8;
> + bitmask = bitmap_get_value8(bits, offset) & bankmask;
>
> chip->buffer[bank] &= ~bankmask;
> - chip->buffer[bank] |= bankmask & (bits[idx] >> shift);
> + chip->buffer[bank] |= bitmask;
> }
> __gen_74x164_write_config(chip);
> mutex_unlock(&chip->lock);
> --
> 2.23.0
>
--
With Best Regards,
Andy Shevchenko
On Sun, Oct 06, 2019 at 11:11:08AM -0400, William Breathitt Gray wrote:
> Utilize for_each_set_clump8 macro, and the bitmap_set_value8 and
> bitmap_get_value8 functions, where appropriate. In addition, remove the
> now unnecessary temp_mask and temp_shift members of the
> intel_soc_dts_sensor_entry structure.
Since it perhaps will be next version, I have few style comments here
(ignore them if you are not going to send a new version by some other reasons).
> int status;
> u32 temp_out;
> + unsigned long update_ptps;
I think it's better to put it one line below.
> u32 out;
> u32 store_ptps;
> u32 store_ptmc;
> - out = (store_ptps & ~(0xFF << (thres_index * 8)));
> - out |= (temp_out & 0xFF) << (thres_index * 8);
> + update_ptps = store_ptps;
> + bitmap_set_value8(&update_ptps, temp_out & 0xFF, thres_index * 8);
> + out = update_ptps;
+ blank line?
After this change it seems we may drop temp_out and use out instead.
> - out = (out & dts->temp_mask) >> dts->temp_shift;
> + temp_raw = out;
> + out = bitmap_get_value8(&temp_raw, dts->id * 8);
> out -= SOC_DTS_TJMAX_ENCODING;
> *temp = sensors->tj_max - out * 1000;
We may also join these together, though it's up to you.
> char name[10];
> int trip_count = 0;
> + int writable_trip_count = 0;
Perhaps move it after next line, or before previous one.
> int trip_mask = 0;
> u32 store_ptps;
> int ret;
> - int i;
> + unsigned long i;
We may skip this change, but if we go with it, better to place before
'int ret;' line.
> + unsigned long trip;
> + unsigned long ptps;
I would group each of these with relative group of definitions above.
> if (notification_support) {
> trip_count = min(SOC_MAX_DTS_TRIPS, trip_cnt);
> + writable_trip_count = trip_count - read_only_trip_cnt;
Maybe writable_trip_count -> writable_trip_cnt? (in align with r/o one).
> + trip_mask = GENMASK(writable_trip_count - 1, 0);
> }
--
With Best Regards,
Andy Shevchenko
On Sun, Oct 06, 2019 at 11:11:11AM -0400, William Breathitt Gray wrote:
> Replace verbose implementation in set_multiple callback with
> for_each_set_clump8 macro to simplify code and improve clarity.
I can test this along with 74x164 at the same time.
> Cc: Phil Reid <[email protected]>
> Signed-off-by: William Breathitt Gray <[email protected]>
> ---
> drivers/gpio/gpio-pca953x.c | 17 +++++++----------
> 1 file changed, 7 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
> index de5d1383f28d..10b669b8f27d 100644
> --- a/drivers/gpio/gpio-pca953x.c
> +++ b/drivers/gpio/gpio-pca953x.c
> @@ -10,6 +10,7 @@
>
> #include <linux/acpi.h>
> #include <linux/bits.h>
> +#include <linux/bitops.h>
> #include <linux/gpio/driver.h>
> #include <linux/gpio/consumer.h>
> #include <linux/i2c.h>
> @@ -456,7 +457,8 @@ static void pca953x_gpio_set_multiple(struct gpio_chip *gc,
> unsigned long *mask, unsigned long *bits)
> {
> struct pca953x_chip *chip = gpiochip_get_data(gc);
> - unsigned int bank_mask, bank_val;
> + unsigned long offset;
> + unsigned long bank_mask;
> int bank;
> u8 reg_val[MAX_BANK];
> int ret;
> @@ -466,15 +468,10 @@ static void pca953x_gpio_set_multiple(struct gpio_chip *gc,
> if (ret)
> goto exit;
>
> - for (bank = 0; bank < NBANK(chip); bank++) {
> - bank_mask = mask[bank / sizeof(*mask)] >>
> - ((bank % sizeof(*mask)) * 8);
> - if (bank_mask) {
> - bank_val = bits[bank / sizeof(*bits)] >>
> - ((bank % sizeof(*bits)) * 8);
> - bank_val &= bank_mask;
> - reg_val[bank] = (reg_val[bank] & ~bank_mask) | bank_val;
> - }
> + for_each_set_clump8(offset, bank_mask, mask, gc->ngpio) {
> + bank = offset / 8;
> + reg_val[bank] &= ~bank_mask;
> + reg_val[bank] |= bitmap_get_value8(bits, offset) & bank_mask;
> }
>
> pca953x_write_regs(chip, chip->regs->output, reg_val);
> --
> 2.23.0
>
--
With Best Regards,
Andy Shevchenko
On Mon, Oct 07, 2019 at 11:21:56AM +0300, Andy Shevchenko wrote:
> On Sun, Oct 06, 2019 at 11:10:58AM -0400, William Breathitt Gray wrote:
> > This macro iterates for each 8-bit group of bits (clump) with set bits,
> > within a bitmap memory region. For each iteration, "start" is set to the
> > bit offset of the found clump, while the respective clump value is
> > stored to the location pointed by "clump". Additionally, the
> > bitmap_get_value8 and bitmap_set_value8 functions are introduced to
> > respectively get and set an 8-bit value in a bitmap memory region.
>
> Very much thank you for an update!
> I have comments below.
>
> > +/**
> > + * bitmap_get_value8 - get an 8-bit value within a memory region
>
> Since it's in find.h I would not collide with bitmap namespace.
> How about
>
> find_and_get_value8()
We modeled the interface for these on the existing bitmap functions, so
perhaps it would be better to move bitmap_get_value8 and
bitmap_set_value8 to include/linux/bitmap.h so that they are with the
rest of the bitmap functions -- afterall, they are operating on bitmaps.
> > + * @addr: address to the bitmap memory region
> > + * @start: bit offset of the 8-bit value; must be a multiple of 8
> > + *
> > + * Returns the 8-bit value located at the @start bit offset within the @addr
> > + * memory region.
> > + */
> > +static inline unsigned long bitmap_get_value8(const unsigned long *addr,
> > + unsigned long start)
> > +{
> > + const size_t index = BIT_WORD(start);
> > + const unsigned long offset = start % BITS_PER_LONG;
> > +
> > + return (addr[index] >> offset) & 0xFF;
> > +}
> > +
> > +/**
> > + * bitmap_set_value8 - set an 8-bit value within a memory region
>
> find_and_set_value8()
>
> ?
>
> > + * @addr: address to the bitmap memory region
> > + * @value: the 8-bit value; values wider than 8 bits may clobber bitmap
> > + * @start: bit offset of the 8-bit value; must be a multiple of 8
> > + */
> > +static inline void bitmap_set_value8(unsigned long *addr, unsigned long value,
> > + unsigned long start)
> > +{
> > + const size_t index = BIT_WORD(start);
> > + const unsigned long offset = start % BITS_PER_LONG;
> > +
> > + addr[index] &= ~(0xFF << offset);
> > + addr[index] |= value << offset;
> > +}
>
> --
> With Best Regards,
> Andy Shevchenko
The find_next_clump8 function can remain exposed via
include/linux/find.h since it fits in with the rest of the functions
there.
The reason I moved the definition to lib/find_bit.c is due to the
circular dependency that arose from the round_down macro. Should I try
to move the definition back to include/linux/find.h and reimplement it
without the round_down macro; or is it best to keep this simpler
implementation here in lib/find_bit.c?
William Breathitt Gray