Config dsi node for mt8183 kukui. Set panel and ports.
Several kukui boards share the same panel property and only compatible
is different. So compatible will be set in board dts for comparison
convenience.
Signed-off-by: Hsin-Yi Wang <[email protected]>
Reviewed-by: Nicolas Boichat <[email protected]>
---
change:
v4: add backlight and enable mipi_tx0
---
.../mediatek/mt8183-kukui-krane-sku176.dts | 5 +++
.../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 42 +++++++++++++++++++
2 files changed, 47 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
index 47113e275cb52..721d16f9c3b4f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
@@ -16,3 +16,8 @@ / {
model = "MediaTek krane sku176 board";
compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183";
};
+
+&panel {
+ status = "okay";
+ compatible = "boe,tv101wum-nl6";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index bf2ad1294dd30..da1e947587074 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -249,6 +249,36 @@ &cpu7 {
proc-supply = <&mt6358_vproc11_reg>;
};
+&dsi0 {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel: panel@0 {
+ /* compatible will be set in board dts */
+ reg = <0>;
+ enable-gpios = <&pio 45 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_pins_default>;
+ avdd-supply = <&ppvarn_lcd>;
+ avee-supply = <&ppvarp_lcd>;
+ pp1800-supply = <&pp1800_lcd>;
+ backlight = <&backlight_lcd0>;
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+
+ ports {
+ port {
+ dsi_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
@@ -290,6 +320,10 @@ &i2c6 {
clock-frequency = <100000>;
};
+&mipi_tx0 {
+ status = "okay";
+};
+
&mmc0 {
status = "okay";
pinctrl-names = "default", "state_uhs";
@@ -547,6 +581,14 @@ pins_clk {
};
};
+ panel_pins_default: panel_pins_default {
+ panel_reset {
+ pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
+ output-low;
+ bias-pull-up;
+ };
+ };
+
pwm0_pin_default: pwm0_pin_default {
pins1 {
pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
--
2.30.0.284.gd98b1dd5eaa7-goog
Similar to krane-sku176 but using a different panel source.
Signed-off-by: Hsin-Yi Wang <[email protected]>
Reviewed-by: Enric Balletbo i Serra <[email protected]>
---
change:
v4: split dt-binding to another patch
---
arch/arm64/boot/dts/mediatek/Makefile | 1 +
.../dts/mediatek/mt8183-kukui-krane-sku0.dts | 23 +++++++++++++++++++
2 files changed, 24 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 18f7b46c4095b..deba27ab76574 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -13,6 +13,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts
new file mode 100644
index 0000000000000..fb5ee91b6fe0e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2019 Google LLC
+ *
+ * Device-tree for Krane sku0.
+ *
+ * SKU is a 8-bit value (0x00 == 0):
+ * - Bits 7..4: Panel ID: 0x0 (AUO)
+ * - Bits 3..0: SKU ID: 0x0 (default)
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-krane.dtsi"
+
+/ {
+ model = "MediaTek krane sku0 board";
+ compatible = "google,krane-sku0", "google,krane", "mediatek,mt8183";
+};
+
+&panel {
+ status = "okay";
+ compatible = "auo,kd101n80-45na";
+};
--
2.30.0.284.gd98b1dd5eaa7-goog
Krane-sku0 is similar to krane-sku176 but using a different panel
source.
Signed-off-by: Hsin-Yi Wang <[email protected]>
---
Documentation/devicetree/bindings/arm/mediatek.yaml | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index 53f0d4e3ea982..93b3bdf6eaeb7 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -120,7 +120,9 @@ properties:
- const: mediatek,mt8183
- description: Google Krane (Lenovo IdeaPad Duet, 10e,...)
items:
- - const: google,krane-sku176
+ - enum:
+ - google,krane-sku0
+ - google,krane-sku176
- const: google,krane
- const: mediatek,mt8183
--
2.30.0.284.gd98b1dd5eaa7-goog
Hi Hsin-Yi,
On 13/1/21 12:03, Hsin-Yi Wang wrote:
> Config dsi node for mt8183 kukui. Set panel and ports.
>
> Several kukui boards share the same panel property and only compatible
> is different. So compatible will be set in board dts for comparison
> convenience.
>
> Signed-off-by: Hsin-Yi Wang <[email protected]>
> Reviewed-by: Nicolas Boichat <[email protected]>
Tested on my Lenovo Ideapad Duet. Display is working.
Tested-by: Enric Balletbo i Serra <[email protected]>
> ---
> change:
> v4: add backlight and enable mipi_tx0
> ---
> .../mediatek/mt8183-kukui-krane-sku176.dts | 5 +++
> .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 42 +++++++++++++++++++
> 2 files changed, 47 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
> index 47113e275cb52..721d16f9c3b4f 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
> @@ -16,3 +16,8 @@ / {
> model = "MediaTek krane sku176 board";
> compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183";
> };
> +
> +&panel {
> + status = "okay";
> + compatible = "boe,tv101wum-nl6";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> index bf2ad1294dd30..da1e947587074 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> @@ -249,6 +249,36 @@ &cpu7 {
> proc-supply = <&mt6358_vproc11_reg>;
> };
>
> +&dsi0 {
> + status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + panel: panel@0 {
> + /* compatible will be set in board dts */
> + reg = <0>;
> + enable-gpios = <&pio 45 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&panel_pins_default>;
> + avdd-supply = <&ppvarn_lcd>;
> + avee-supply = <&ppvarp_lcd>;
> + pp1800-supply = <&pp1800_lcd>;
> + backlight = <&backlight_lcd0>;
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&dsi_out>;
> + };
> + };
> + };
> +
> + ports {
> + port {
> + dsi_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> + };
> +};
> +
> &i2c0 {
> pinctrl-names = "default";
> pinctrl-0 = <&i2c0_pins>;
> @@ -290,6 +320,10 @@ &i2c6 {
> clock-frequency = <100000>;
> };
>
> +&mipi_tx0 {
> + status = "okay";
> +};
> +
> &mmc0 {
> status = "okay";
> pinctrl-names = "default", "state_uhs";
> @@ -547,6 +581,14 @@ pins_clk {
> };
> };
>
> + panel_pins_default: panel_pins_default {
> + panel_reset {
> + pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
> + output-low;
> + bias-pull-up;
> + };
> + };
> +
> pwm0_pin_default: pwm0_pin_default {
> pins1 {
> pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
>
Hi Hsin-Yi,
On 13/1/21 12:04, Hsin-Yi Wang wrote:
> Krane-sku0 is similar to krane-sku176 but using a different panel
> source.
>
> Signed-off-by: Hsin-Yi Wang <[email protected]>
Reviewed-by: Enric Balletbo i Serra <[email protected]>
> ---
> Documentation/devicetree/bindings/arm/mediatek.yaml | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
> index 53f0d4e3ea982..93b3bdf6eaeb7 100644
> --- a/Documentation/devicetree/bindings/arm/mediatek.yaml
> +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
> @@ -120,7 +120,9 @@ properties:
> - const: mediatek,mt8183
> - description: Google Krane (Lenovo IdeaPad Duet, 10e,...)
> items:
> - - const: google,krane-sku176
> + - enum:
> + - google,krane-sku0
> + - google,krane-sku176
> - const: google,krane
> - const: mediatek,mt8183
>
>
On Wed, 13 Jan 2021 19:04:03 +0800, Hsin-Yi Wang wrote:
> Krane-sku0 is similar to krane-sku176 but using a different panel
> source.
>
> Signed-off-by: Hsin-Yi Wang <[email protected]>
> ---
> Documentation/devicetree/bindings/arm/mediatek.yaml | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
Reviewed-by: Rob Herring <[email protected]>
On 13/01/2021 12:03, Hsin-Yi Wang wrote:
> Config dsi node for mt8183 kukui. Set panel and ports.
>
> Several kukui boards share the same panel property and only compatible
> is different. So compatible will be set in board dts for comparison
> convenience.
>
> Signed-off-by: Hsin-Yi Wang <[email protected]>
> Reviewed-by: Nicolas Boichat <[email protected]>
> ---
Whole series applied to v5.11-next/dts64
Thanks!
> change:
> v4: add backlight and enable mipi_tx0
> ---
> .../mediatek/mt8183-kukui-krane-sku176.dts | 5 +++
> .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 42 +++++++++++++++++++
> 2 files changed, 47 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
> index 47113e275cb52..721d16f9c3b4f 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
> @@ -16,3 +16,8 @@ / {
> model = "MediaTek krane sku176 board";
> compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183";
> };
> +
> +&panel {
> + status = "okay";
> + compatible = "boe,tv101wum-nl6";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> index bf2ad1294dd30..da1e947587074 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> @@ -249,6 +249,36 @@ &cpu7 {
> proc-supply = <&mt6358_vproc11_reg>;
> };
>
> +&dsi0 {
> + status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + panel: panel@0 {
> + /* compatible will be set in board dts */
> + reg = <0>;
> + enable-gpios = <&pio 45 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&panel_pins_default>;
> + avdd-supply = <&ppvarn_lcd>;
> + avee-supply = <&ppvarp_lcd>;
> + pp1800-supply = <&pp1800_lcd>;
> + backlight = <&backlight_lcd0>;
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&dsi_out>;
> + };
> + };
> + };
> +
> + ports {
> + port {
> + dsi_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> + };
> +};
> +
> &i2c0 {
> pinctrl-names = "default";
> pinctrl-0 = <&i2c0_pins>;
> @@ -290,6 +320,10 @@ &i2c6 {
> clock-frequency = <100000>;
> };
>
> +&mipi_tx0 {
> + status = "okay";
> +};
> +
> &mmc0 {
> status = "okay";
> pinctrl-names = "default", "state_uhs";
> @@ -547,6 +581,14 @@ pins_clk {
> };
> };
>
> + panel_pins_default: panel_pins_default {
> + panel_reset {
> + pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
> + output-low;
> + bias-pull-up;
> + };
> + };
> +
> pwm0_pin_default: pwm0_pin_default {
> pins1 {
> pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
>