rtw_read8() reads data from device via USB API which may fail. In case
of any failure previous code returned stack data to callers, which is
wrong.
Fix it by changing rtw_read8() prototype and prevent caller from
touching random stack data
Signed-off-by: Pavel Skripkin <[email protected]>
---
drivers/staging/r8188eu/core/rtw_efuse.c | 13 +-
drivers/staging/r8188eu/core/rtw_fw.c | 56 ++++--
drivers/staging/r8188eu/core/rtw_led.c | 16 +-
drivers/staging/r8188eu/core/rtw_mlme_ext.c | 48 ++++-
drivers/staging/r8188eu/core/rtw_wlan_util.c | 20 +-
drivers/staging/r8188eu/hal/HalPhyRf_8188e.c | 18 +-
drivers/staging/r8188eu/hal/HalPwrSeqCmd.c | 9 +-
drivers/staging/r8188eu/hal/hal_com.c | 27 ++-
drivers/staging/r8188eu/hal/rtl8188e_cmd.c | 37 +++-
drivers/staging/r8188eu/hal/rtl8188e_dm.c | 6 +-
.../staging/r8188eu/hal/rtl8188e_hal_init.c | 69 +++++--
drivers/staging/r8188eu/hal/rtl8188e_phycfg.c | 10 +-
drivers/staging/r8188eu/hal/usb_halinit.c | 171 +++++++++++++++---
drivers/staging/r8188eu/hal/usb_ops_linux.c | 7 +-
drivers/staging/r8188eu/include/rtw_io.h | 2 +-
drivers/staging/r8188eu/os_dep/ioctl_linux.c | 11 +-
16 files changed, 418 insertions(+), 102 deletions(-)
diff --git a/drivers/staging/r8188eu/core/rtw_efuse.c b/drivers/staging/r8188eu/core/rtw_efuse.c
index 0e0e60638880..a2691c7f96f6 100644
--- a/drivers/staging/r8188eu/core/rtw_efuse.c
+++ b/drivers/staging/r8188eu/core/rtw_efuse.c
@@ -28,14 +28,21 @@ ReadEFuseByte(
u32 value32;
u8 readbyte;
u16 retry;
+ int res;
/* Write Address */
rtw_write8(Adapter, EFUSE_CTRL + 1, (_offset & 0xff));
- readbyte = rtw_read8(Adapter, EFUSE_CTRL + 2);
+ res = rtw_read8(Adapter, EFUSE_CTRL + 2, &readbyte);
+ if (res)
+ return;
+
rtw_write8(Adapter, EFUSE_CTRL + 2, ((_offset >> 8) & 0x03) | (readbyte & 0xfc));
/* Write bit 32 0 */
- readbyte = rtw_read8(Adapter, EFUSE_CTRL + 3);
+ res = rtw_read8(Adapter, EFUSE_CTRL + 3, &readbyte);
+ if (res)
+ return;
+
rtw_write8(Adapter, EFUSE_CTRL + 3, (readbyte & 0x7f));
/* Check bit 32 read-ready */
@@ -54,6 +61,8 @@ ReadEFuseByte(
value32 = rtw_read32(Adapter, EFUSE_CTRL);
*pbuf = (u8)(value32 & 0xff);
+
+ /* FIXME: return an error to caller */
}
/*-----------------------------------------------------------------------------
diff --git a/drivers/staging/r8188eu/core/rtw_fw.c b/drivers/staging/r8188eu/core/rtw_fw.c
index 87dc0e97652a..e1fc883a5f7e 100644
--- a/drivers/staging/r8188eu/core/rtw_fw.c
+++ b/drivers/staging/r8188eu/core/rtw_fw.c
@@ -44,18 +44,28 @@ static_assert(sizeof(struct rt_firmware_hdr) == 32);
static void fw_download_enable(struct adapter *padapter, bool enable)
{
u8 tmp;
+ int res;
if (enable) {
/* MCU firmware download enable. */
- tmp = rtw_read8(padapter, REG_MCUFWDL);
+ res = rtw_read8(padapter, REG_MCUFWDL, &tmp);
+ if (res)
+ return;
+
rtw_write8(padapter, REG_MCUFWDL, tmp | 0x01);
/* 8051 reset */
- tmp = rtw_read8(padapter, REG_MCUFWDL + 2);
+ res = rtw_read8(padapter, REG_MCUFWDL + 2, &tmp);
+ if (res)
+ return;
+
rtw_write8(padapter, REG_MCUFWDL + 2, tmp & 0xf7);
} else {
/* MCU firmware download disable. */
- tmp = rtw_read8(padapter, REG_MCUFWDL);
+ res = rtw_read8(padapter, REG_MCUFWDL, &tmp);
+ if (res)
+ return;
+
rtw_write8(padapter, REG_MCUFWDL, tmp & 0xfe);
/* Reserved for fw extension. */
@@ -125,8 +135,13 @@ static int page_write(struct adapter *padapter, u32 page, u8 *buffer, u32 size)
{
u8 value8;
u8 u8Page = (u8)(page & 0x07);
+ int res;
+
+ res = rtw_read8(padapter, REG_MCUFWDL + 2, &value8);
+ if (res)
+ return _FAIL;
- value8 = (rtw_read8(padapter, REG_MCUFWDL + 2) & 0xF8) | u8Page;
+ value8 = (value8 & 0xF8) | u8Page;
rtw_write8(padapter, REG_MCUFWDL + 2, value8);
return block_write(padapter, buffer, size);
@@ -165,8 +180,12 @@ static int write_fw(struct adapter *padapter, u8 *buffer, u32 size)
void rtw_reset_8051(struct adapter *padapter)
{
u8 val8;
+ int res;
+
+ res = rtw_read8(padapter, REG_SYS_FUNC_EN + 1, &val8);
+ if (res)
+ return;
- val8 = rtw_read8(padapter, REG_SYS_FUNC_EN + 1);
rtw_write8(padapter, REG_SYS_FUNC_EN + 1, val8 & (~BIT(2)));
rtw_write8(padapter, REG_SYS_FUNC_EN + 1, val8 | (BIT(2)));
}
@@ -239,7 +258,7 @@ static int load_firmware(struct rt_firmware *rtfw, struct device *device)
int rtl8188e_firmware_download(struct adapter *padapter)
{
int ret = _SUCCESS;
- u8 write_fw_retry = 0;
+ u8 reg;
unsigned long fwdl_timeout;
struct dvobj_priv *dvobj = adapter_to_dvobj(padapter);
struct device *device = dvobj_to_dev(dvobj);
@@ -269,23 +288,34 @@ int rtl8188e_firmware_download(struct adapter *padapter)
/* Suggested by Filen. If 8051 is running in RAM code, driver should inform Fw to reset by itself, */
/* or it will cause download Fw fail. 2010.02.01. by tynli. */
- if (rtw_read8(padapter, REG_MCUFWDL) & RAM_DL_SEL) { /* 8051 RAM code */
+ ret = rtw_read8(padapter, REG_MCUFWDL, ®);
+ if (ret) {
+ ret = _FAIL;
+ goto exit;
+ }
+
+ if (reg & RAM_DL_SEL) { /* 8051 RAM code */
rtw_write8(padapter, REG_MCUFWDL, 0x00);
rtw_reset_8051(padapter);
}
fw_download_enable(padapter, true);
fwdl_timeout = jiffies + msecs_to_jiffies(500);
- while (1) {
+ do {
/* reset the FWDL chksum */
- rtw_write8(padapter, REG_MCUFWDL, rtw_read8(padapter, REG_MCUFWDL) | FWDL_CHKSUM_RPT);
+ ret = rtw_read8(padapter, REG_MCUFWDL, ®);
+ if (ret) {
+ ret = _FAIL;
+ continue;
+ }
- ret = write_fw(padapter, fw_data, fw_size);
+ rtw_write8(padapter, REG_MCUFWDL, reg | FWDL_CHKSUM_RPT);
- if (ret == _SUCCESS ||
- (time_after(jiffies, fwdl_timeout) && write_fw_retry++ >= 3))
+ ret = write_fw(padapter, fw_data, fw_size);
+ if (ret == _SUCCESS)
break;
- }
+ } while (!time_after(jiffies, fwdl_timeout));
+
fw_download_enable(padapter, false);
if (ret != _SUCCESS)
goto exit;
diff --git a/drivers/staging/r8188eu/core/rtw_led.c b/drivers/staging/r8188eu/core/rtw_led.c
index 2f3000428af7..25989acf5259 100644
--- a/drivers/staging/r8188eu/core/rtw_led.c
+++ b/drivers/staging/r8188eu/core/rtw_led.c
@@ -35,11 +35,15 @@ static void ResetLedStatus(struct LED_871x *pLed)
static void SwLedOn(struct adapter *padapter, struct LED_871x *pLed)
{
u8 LedCfg;
+ int res;
if (padapter->bSurpriseRemoved || padapter->bDriverStopped)
return;
- LedCfg = rtw_read8(padapter, REG_LEDCFG2);
+ res = rtw_read8(padapter, REG_LEDCFG2, &LedCfg);
+ if (res)
+ return;
+
rtw_write8(padapter, REG_LEDCFG2, (LedCfg & 0xf0) | BIT(5) | BIT(6)); /* SW control led0 on. */
pLed->bLedOn = true;
}
@@ -47,15 +51,21 @@ static void SwLedOn(struct adapter *padapter, struct LED_871x *pLed)
static void SwLedOff(struct adapter *padapter, struct LED_871x *pLed)
{
u8 LedCfg;
+ int res;
if (padapter->bSurpriseRemoved || padapter->bDriverStopped)
goto exit;
- LedCfg = rtw_read8(padapter, REG_LEDCFG2);/* 0x4E */
+ res = rtw_read8(padapter, REG_LEDCFG2, &LedCfg);/* 0x4E */
+ if (res)
+ goto exit;
LedCfg &= 0x90; /* Set to software control. */
rtw_write8(padapter, REG_LEDCFG2, (LedCfg | BIT(3)));
- LedCfg = rtw_read8(padapter, REG_MAC_PINMUX_CFG);
+ res = rtw_read8(padapter, REG_MAC_PINMUX_CFG, &LedCfg);
+ if (res)
+ goto exit;
+
LedCfg &= 0xFE;
rtw_write8(padapter, REG_MAC_PINMUX_CFG, LedCfg);
exit:
diff --git a/drivers/staging/r8188eu/core/rtw_mlme_ext.c b/drivers/staging/r8188eu/core/rtw_mlme_ext.c
index 87bf37f33606..2eb9d85e5553 100644
--- a/drivers/staging/r8188eu/core/rtw_mlme_ext.c
+++ b/drivers/staging/r8188eu/core/rtw_mlme_ext.c
@@ -5650,14 +5650,28 @@ unsigned int send_beacon(struct adapter *padapter)
bool get_beacon_valid_bit(struct adapter *adapter)
{
+ int res;
+ u8 reg;
+
+ res = rtw_read8(adapter, REG_TDECTRL + 2, ®);
+ if (res)
+ return false;
+
/* BIT(16) of REG_TDECTRL = BIT(0) of REG_TDECTRL+2 */
- return BIT(0) & rtw_read8(adapter, REG_TDECTRL + 2);
+ return BIT(0) & reg;
}
void clear_beacon_valid_bit(struct adapter *adapter)
{
+ int res;
+ u8 reg;
+
+ res = rtw_read8(adapter, REG_TDECTRL + 2, ®);
+ if (res)
+ return;
+
/* BIT(16) of REG_TDECTRL = BIT(0) of REG_TDECTRL+2, write 1 to clear, Clear by sw */
- rtw_write8(adapter, REG_TDECTRL + 2, rtw_read8(adapter, REG_TDECTRL + 2) | BIT(0));
+ rtw_write8(adapter, REG_TDECTRL + 2, reg | BIT(0));
}
/****************************************************************************
@@ -5985,7 +5999,8 @@ static void rtw_set_bssid(struct adapter *adapter, u8 *bssid)
static void mlme_join(struct adapter *adapter, int type)
{
struct mlme_priv *mlmepriv = &adapter->mlmepriv;
- u8 retry_limit = 0x30;
+ u8 retry_limit = 0x30, reg;
+ int res;
switch (type) {
case 0:
@@ -6010,7 +6025,11 @@ static void mlme_join(struct adapter *adapter, int type)
case 2:
/* sta add event call back */
/* enable update TSF */
- rtw_write8(adapter, REG_BCN_CTRL, rtw_read8(adapter, REG_BCN_CTRL) & (~BIT(4)));
+ res = rtw_read8(adapter, REG_BCN_CTRL, ®);
+ if (res)
+ return;
+
+ rtw_write8(adapter, REG_BCN_CTRL, reg & (~BIT(4)));
if (check_fwstate(mlmepriv, WIFI_ADHOC_STATE | WIFI_ADHOC_MASTER_STATE))
retry_limit = 0x7;
@@ -6731,6 +6750,9 @@ void mlmeext_sta_add_event_callback(struct adapter *padapter, struct sta_info *p
static void mlme_disconnect(struct adapter *adapter)
{
+ int res;
+ u8 reg;
+
/* Set RCR to not to receive data frame when NO LINK state */
/* reject all data frames */
rtw_write16(adapter, REG_RXFLTMAP2, 0x00);
@@ -6739,7 +6761,12 @@ static void mlme_disconnect(struct adapter *adapter)
rtw_write8(adapter, REG_DUAL_TSF_RST, (BIT(0) | BIT(1)));
/* disable update TSF */
- rtw_write8(adapter, REG_BCN_CTRL, rtw_read8(adapter, REG_BCN_CTRL) | BIT(4));
+
+ res = rtw_read8(adapter, REG_BCN_CTRL, ®);
+ if (res)
+ return;
+
+ rtw_write8(adapter, REG_BCN_CTRL, reg | BIT(4));
}
void mlmeext_sta_del_event_callback(struct adapter *padapter)
@@ -6793,14 +6820,15 @@ static u8 chk_ap_is_alive(struct sta_info *psta)
return ret;
}
-static void rtl8188e_sreset_linked_status_check(struct adapter *padapter)
+static int rtl8188e_sreset_linked_status_check(struct adapter *padapter)
{
u32 rx_dma_status = rtw_read32(padapter, REG_RXDMA_STATUS);
+ u8 reg;
if (rx_dma_status != 0x00)
rtw_write32(padapter, REG_RXDMA_STATUS, rx_dma_status);
- rtw_read8(padapter, REG_FMETHR);
+ return rtw_read8(padapter, REG_FMETHR, ®);
}
void linked_status_chk(struct adapter *padapter)
@@ -7202,6 +7230,7 @@ u8 disconnect_hdl(struct adapter *padapter, unsigned char *pbuf)
struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info;
struct wlan_bssid_ex *pnetwork = (struct wlan_bssid_ex *)(&pmlmeinfo->network);
u8 val8;
+ int res;
if (is_client_associated_to_ap(padapter))
issue_deauth_ex(padapter, pnetwork->MacAddress, WLAN_REASON_DEAUTH_LEAVING, param->deauth_timeout_ms / 100, 100);
@@ -7214,7 +7243,10 @@ u8 disconnect_hdl(struct adapter *padapter, unsigned char *pbuf)
if (((pmlmeinfo->state & 0x03) == WIFI_FW_ADHOC_STATE) || ((pmlmeinfo->state & 0x03) == WIFI_FW_AP_STATE)) {
/* Stop BCN */
- val8 = rtw_read8(padapter, REG_BCN_CTRL);
+ res = rtw_read8(padapter, REG_BCN_CTRL, &val8);
+ if (res)
+ return H2C_DROPPED;
+
rtw_write8(padapter, REG_BCN_CTRL, val8 & (~(EN_BCN_FUNCTION | EN_TXBCN_RPT)));
}
diff --git a/drivers/staging/r8188eu/core/rtw_wlan_util.c b/drivers/staging/r8188eu/core/rtw_wlan_util.c
index 9f0a823b6e52..2d5fd654ead9 100644
--- a/drivers/staging/r8188eu/core/rtw_wlan_util.c
+++ b/drivers/staging/r8188eu/core/rtw_wlan_util.c
@@ -279,8 +279,13 @@ void Restore_DM_Func_Flag(struct adapter *padapter)
void Set_MSR(struct adapter *padapter, u8 type)
{
u8 val8;
+ int res;
- val8 = rtw_read8(padapter, MSR) & 0x0c;
+ res = rtw_read8(padapter, MSR, &val8);
+ if (res)
+ return;
+
+ val8 &= 0x0c;
val8 |= type;
rtw_write8(padapter, MSR, val8);
}
@@ -505,7 +510,11 @@ int WMM_param_handler(struct adapter *padapter, struct ndis_802_11_var_ie *pIE)
static void set_acm_ctrl(struct adapter *adapter, u8 acm_mask)
{
- u8 acmctrl = rtw_read8(adapter, REG_ACMHWCTRL);
+ u8 acmctrl;
+ int res = rtw_read8(adapter, REG_ACMHWCTRL, &acmctrl);
+
+ if (res)
+ return;
if (acm_mask > 1)
acmctrl = acmctrl | 0x1;
@@ -765,6 +774,7 @@ void HT_info_handler(struct adapter *padapter, struct ndis_802_11_var_ie *pIE)
static void set_min_ampdu_spacing(struct adapter *adapter, u8 spacing)
{
u8 sec_spacing;
+ int res;
if (spacing <= 7) {
switch (adapter->securitypriv.dot11PrivacyAlgrthm) {
@@ -786,8 +796,12 @@ static void set_min_ampdu_spacing(struct adapter *adapter, u8 spacing)
if (spacing < sec_spacing)
spacing = sec_spacing;
+ res = rtw_read8(adapter, REG_AMPDU_MIN_SPACE, &sec_spacing);
+ if (res)
+ return;
+
rtw_write8(adapter, REG_AMPDU_MIN_SPACE,
- (rtw_read8(adapter, REG_AMPDU_MIN_SPACE) & 0xf8) | spacing);
+ (sec_spacing & 0xf8) | spacing);
}
}
diff --git a/drivers/staging/r8188eu/hal/HalPhyRf_8188e.c b/drivers/staging/r8188eu/hal/HalPhyRf_8188e.c
index b944c8071a3b..a5b7980dfcee 100644
--- a/drivers/staging/r8188eu/hal/HalPhyRf_8188e.c
+++ b/drivers/staging/r8188eu/hal/HalPhyRf_8188e.c
@@ -463,6 +463,7 @@ void _PHY_SaveADDARegisters(struct adapter *adapt, u32 *ADDAReg, u32 *ADDABackup
}
}
+/* FIXME: return an error to caller */
static void _PHY_SaveMACRegisters(
struct adapter *adapt,
u32 *MACReg,
@@ -470,9 +471,17 @@ static void _PHY_SaveMACRegisters(
)
{
u32 i;
+ int res;
- for (i = 0; i < (IQK_MAC_REG_NUM - 1); i++)
- MACBackup[i] = rtw_read8(adapt, MACReg[i]);
+ for (i = 0; i < (IQK_MAC_REG_NUM - 1); i++) {
+ u8 reg;
+
+ res = rtw_read8(adapt, MACReg[i], ®);
+ if (res)
+ return;
+
+ MACBackup[i] = reg;
+ }
MACBackup[i] = rtw_read32(adapt, MACReg[i]);
}
@@ -739,9 +748,12 @@ static void phy_LCCalibrate_8188E(struct adapter *adapt)
{
u8 tmpreg;
u32 RF_Amode = 0, LC_Cal;
+ int res;
/* Check continuous TX and Packet TX */
- tmpreg = rtw_read8(adapt, 0xd03);
+ res = rtw_read8(adapt, 0xd03, &tmpreg);
+ if (res)
+ return;
if ((tmpreg & 0x70) != 0) /* Deal with contisuous TX case */
rtw_write8(adapt, 0xd03, tmpreg & 0x8F); /* disable all continuous TX */
diff --git a/drivers/staging/r8188eu/hal/HalPwrSeqCmd.c b/drivers/staging/r8188eu/hal/HalPwrSeqCmd.c
index 150ea380c39e..4a4563b900b3 100644
--- a/drivers/staging/r8188eu/hal/HalPwrSeqCmd.c
+++ b/drivers/staging/r8188eu/hal/HalPwrSeqCmd.c
@@ -12,6 +12,7 @@ u8 HalPwrSeqCmdParsing(struct adapter *padapter, struct wl_pwr_cfg pwrseqcmd[])
u32 offset = 0;
u32 poll_count = 0; /* polling autoload done. */
u32 max_poll_count = 5000;
+ int res;
do {
pwrcfgcmd = pwrseqcmd[aryidx];
@@ -21,7 +22,9 @@ u8 HalPwrSeqCmdParsing(struct adapter *padapter, struct wl_pwr_cfg pwrseqcmd[])
offset = GET_PWR_CFG_OFFSET(pwrcfgcmd);
/* Read the value from system register */
- value = rtw_read8(padapter, offset);
+ res = rtw_read8(padapter, offset, &value);
+ if (res)
+ return false;
value &= ~(GET_PWR_CFG_MASK(pwrcfgcmd));
value |= (GET_PWR_CFG_VALUE(pwrcfgcmd) & GET_PWR_CFG_MASK(pwrcfgcmd));
@@ -33,7 +36,9 @@ u8 HalPwrSeqCmdParsing(struct adapter *padapter, struct wl_pwr_cfg pwrseqcmd[])
poll_bit = false;
offset = GET_PWR_CFG_OFFSET(pwrcfgcmd);
do {
- value = rtw_read8(padapter, offset);
+ res = rtw_read8(padapter, offset, &value);
+ if (res)
+ return false;
value &= GET_PWR_CFG_MASK(pwrcfgcmd);
if (value == (GET_PWR_CFG_VALUE(pwrcfgcmd) & GET_PWR_CFG_MASK(pwrcfgcmd)))
diff --git a/drivers/staging/r8188eu/hal/hal_com.c b/drivers/staging/r8188eu/hal/hal_com.c
index 910cc07f656c..e9a32dd84a8e 100644
--- a/drivers/staging/r8188eu/hal/hal_com.c
+++ b/drivers/staging/r8188eu/hal/hal_com.c
@@ -303,7 +303,9 @@ s32 c2h_evt_read(struct adapter *adapter, u8 *buf)
if (!buf)
goto exit;
- trigger = rtw_read8(adapter, REG_C2HEVT_CLEAR);
+ ret = rtw_read8(adapter, REG_C2HEVT_CLEAR, &trigger);
+ if (ret)
+ return _FAIL;
if (trigger == C2H_EVT_HOST_CLOSE)
goto exit; /* Not ready */
@@ -314,13 +316,26 @@ s32 c2h_evt_read(struct adapter *adapter, u8 *buf)
memset(c2h_evt, 0, 16);
- *buf = rtw_read8(adapter, REG_C2HEVT_MSG_NORMAL);
- *(buf + 1) = rtw_read8(adapter, REG_C2HEVT_MSG_NORMAL + 1);
+ ret = rtw_read8(adapter, REG_C2HEVT_MSG_NORMAL, buf);
+ if (ret) {
+ ret = _FAIL;
+ goto clear_evt;
+ }
+ ret = rtw_read8(adapter, REG_C2HEVT_MSG_NORMAL + 1, buf + 1);
+ if (ret) {
+ ret = _FAIL;
+ goto clear_evt;
+ }
/* Read the content */
- for (i = 0; i < c2h_evt->plen; i++)
- c2h_evt->payload[i] = rtw_read8(adapter, REG_C2HEVT_MSG_NORMAL +
- sizeof(*c2h_evt) + i);
+ for (i = 0; i < c2h_evt->plen; i++) {
+ ret = rtw_read8(adapter, REG_C2HEVT_MSG_NORMAL +
+ sizeof(*c2h_evt) + i, c2h_evt->payload + i);
+ if (ret) {
+ ret = _FAIL;
+ goto clear_evt;
+ }
+ }
ret = _SUCCESS;
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_cmd.c b/drivers/staging/r8188eu/hal/rtl8188e_cmd.c
index 475650dc7301..b01ee1695fee 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_cmd.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_cmd.c
@@ -18,13 +18,18 @@
static u8 _is_fw_read_cmd_down(struct adapter *adapt, u8 msgbox_num)
{
- u8 read_down = false;
+ u8 read_down = false, reg;
int retry_cnts = 100;
+ int res;
u8 valid;
do {
- valid = rtw_read8(adapt, REG_HMETFR) & BIT(msgbox_num);
+ res = rtw_read8(adapt, REG_HMETFR, ®);
+ if (res)
+ continue;
+
+ valid = reg & BIT(msgbox_num);
if (0 == valid)
read_down = true;
} while ((!read_down) && (retry_cnts--));
@@ -533,6 +538,8 @@ void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
bool bcn_valid = false;
u8 DLBcnCount = 0;
u32 poll = 0;
+ u8 reg;
+ int res;
if (mstatus == 1) {
/* We should set AID, correct TSF, HW seq enable before set JoinBssReport to Fw in 88/92C. */
@@ -547,8 +554,17 @@ void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
/* Disable Hw protection for a time which revserd for Hw sending beacon. */
/* Fix download reserved page packet fail that access collision with the protection time. */
/* 2010.05.11. Added by tynli. */
- rtw_write8(adapt, REG_BCN_CTRL, rtw_read8(adapt, REG_BCN_CTRL) & (~BIT(3)));
- rtw_write8(adapt, REG_BCN_CTRL, rtw_read8(adapt, REG_BCN_CTRL) | BIT(4));
+ res = rtw_read8(adapt, REG_BCN_CTRL, ®);
+ if (res)
+ return;
+
+ rtw_write8(adapt, REG_BCN_CTRL, reg & (~BIT(3)));
+
+ res = rtw_read8(adapt, REG_BCN_CTRL, ®);
+ if (res)
+ return;
+
+ rtw_write8(adapt, REG_BCN_CTRL, reg | BIT(4));
if (haldata->RegFwHwTxQCtrl & BIT(6))
bSendBeacon = true;
@@ -581,8 +597,17 @@ void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
/* */
/* Enable Bcn */
- rtw_write8(adapt, REG_BCN_CTRL, rtw_read8(adapt, REG_BCN_CTRL) | BIT(3));
- rtw_write8(adapt, REG_BCN_CTRL, rtw_read8(adapt, REG_BCN_CTRL) & (~BIT(4)));
+ res = rtw_read8(adapt, REG_BCN_CTRL, ®);
+ if (res)
+ return;
+
+ rtw_write8(adapt, REG_BCN_CTRL, reg | BIT(3));
+
+ res = rtw_read8(adapt, REG_BCN_CTRL, ®);
+ if (res)
+ return;
+
+ rtw_write8(adapt, REG_BCN_CTRL, reg & (~BIT(4)));
/* To make sure that if there exists an adapter which would like to send beacon. */
/* If exists, the origianl value of 0x422[6] will be 1, we should check this to */
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_dm.c b/drivers/staging/r8188eu/hal/rtl8188e_dm.c
index 6d28e3dc0d26..0399872c4546 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_dm.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_dm.c
@@ -12,8 +12,12 @@
static void dm_InitGPIOSetting(struct adapter *Adapter)
{
u8 tmp1byte;
+ int res;
+
+ res = rtw_read8(Adapter, REG_GPIO_MUXCFG, &tmp1byte);
+ if (res)
+ return;
- tmp1byte = rtw_read8(Adapter, REG_GPIO_MUXCFG);
tmp1byte &= (GPIOSEL_GPIO | ~GPIOSEL_ENBT);
rtw_write8(Adapter, REG_GPIO_MUXCFG, tmp1byte);
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c b/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
index e17375a74f17..e67ecbd1ba79 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
@@ -13,10 +13,14 @@
static void iol_mode_enable(struct adapter *padapter, u8 enable)
{
u8 reg_0xf0 = 0;
+ int res;
if (enable) {
/* Enable initial offload */
- reg_0xf0 = rtw_read8(padapter, REG_SYS_CFG);
+ res = rtw_read8(padapter, REG_SYS_CFG, ®_0xf0);
+ if (res)
+ return;
+
rtw_write8(padapter, REG_SYS_CFG, reg_0xf0 | SW_OFFLOAD_EN);
if (!padapter->bFWReady)
@@ -24,7 +28,10 @@ static void iol_mode_enable(struct adapter *padapter, u8 enable)
} else {
/* disable initial offload */
- reg_0xf0 = rtw_read8(padapter, REG_SYS_CFG);
+ res = rtw_read8(padapter, REG_SYS_CFG, ®_0xf0);
+ if (res)
+ return;
+
rtw_write8(padapter, REG_SYS_CFG, reg_0xf0 & ~SW_OFFLOAD_EN);
}
}
@@ -34,17 +41,31 @@ static s32 iol_execute(struct adapter *padapter, u8 control)
s32 status = _FAIL;
u8 reg_0x88 = 0;
unsigned long timeout;
+ int res;
control = control & 0x0f;
- reg_0x88 = rtw_read8(padapter, REG_HMEBOX_E0);
+ res = rtw_read8(padapter, REG_HMEBOX_E0, ®_0x88);
+ if (res)
+ return _FAIL;
+
rtw_write8(padapter, REG_HMEBOX_E0, reg_0x88 | control);
timeout = jiffies + msecs_to_jiffies(1000);
- while ((reg_0x88 = rtw_read8(padapter, REG_HMEBOX_E0)) & control &&
- time_before(jiffies, timeout))
- ;
- reg_0x88 = rtw_read8(padapter, REG_HMEBOX_E0);
+ do {
+ res = rtw_read8(padapter, REG_HMEBOX_E0, ®_0x88);
+ if (res)
+ continue;
+
+ if (!(reg_0x88 & control))
+ break;
+
+ } while (time_before(jiffies, timeout));
+
+ res = rtw_read8(padapter, REG_HMEBOX_E0, ®_0x88);
+ if (res)
+ return _FAIL;
+
status = (reg_0x88 & control) ? _FAIL : _SUCCESS;
if (reg_0x88 & control << 4)
status = _FAIL;
@@ -190,13 +211,18 @@ static void efuse_read_phymap_from_txpktbuf(
u16 dbg_addr = 0;
__le32 lo32 = 0, hi32 = 0;
u16 len = 0, count = 0;
- int i = 0;
+ int i = 0, res;
u16 limit = *size;
-
+ u8 reg;
u8 *pos = content;
- if (bcnhead < 0) /* if not valid */
- bcnhead = rtw_read8(adapter, REG_TDECTRL + 1);
+ if (bcnhead < 0) { /* if not valid */
+ res = rtw_read8(adapter, REG_TDECTRL + 1, ®);
+ if (res)
+ return;
+
+ bcnhead = reg;
+ }
rtw_write8(adapter, REG_PKT_BUFF_ACCESS_CTRL, TXPKT_BUF_SELECT);
@@ -207,8 +233,16 @@ static void efuse_read_phymap_from_txpktbuf(
rtw_write8(adapter, REG_TXPKTBUF_DBG, 0);
timeout = jiffies + msecs_to_jiffies(1000);
- while (!rtw_read8(adapter, REG_TXPKTBUF_DBG) && time_before(jiffies, timeout))
+ do {
+ res = rtw_read8(adapter, REG_TXPKTBUF_DBG, ®);
+ if (res)
+ continue;
+
+ if (reg)
+ break;
+
rtw_usleep_os(100);
+ } while (time_before(jiffies, timeout));
/* data from EEPROM needs to be in LE */
lo32 = cpu_to_le32(rtw_read32(adapter, REG_PKTBUF_DBG_DATA_L));
@@ -525,10 +559,17 @@ void rtl8188e_SetHalODMVar(struct adapter *Adapter, void *pValue1, bool bSet)
void hal_notch_filter_8188e(struct adapter *adapter, bool enable)
{
+ int res;
+ u8 reg;
+
+ res = rtw_read8(adapter, rOFDM0_RxDSP + 1, ®);
+ if (res)
+ return;
+
if (enable)
- rtw_write8(adapter, rOFDM0_RxDSP + 1, rtw_read8(adapter, rOFDM0_RxDSP + 1) | BIT(1));
+ rtw_write8(adapter, rOFDM0_RxDSP + 1, reg | BIT(1));
else
- rtw_write8(adapter, rOFDM0_RxDSP + 1, rtw_read8(adapter, rOFDM0_RxDSP + 1) & ~BIT(1));
+ rtw_write8(adapter, rOFDM0_RxDSP + 1, reg & ~BIT(1));
}
/* */
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_phycfg.c b/drivers/staging/r8188eu/hal/rtl8188e_phycfg.c
index 4864dafd887b..985339a974fc 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_phycfg.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_phycfg.c
@@ -594,6 +594,7 @@ _PHY_SetBWMode92C(
struct hal_data_8188e *pHalData = &Adapter->haldata;
u8 regBwOpMode;
u8 regRRSR_RSC;
+ int res;
if (Adapter->bDriverStopped)
return;
@@ -602,8 +603,13 @@ _PHY_SetBWMode92C(
/* 3<1>Set MAC register */
/* 3 */
- regBwOpMode = rtw_read8(Adapter, REG_BWOPMODE);
- regRRSR_RSC = rtw_read8(Adapter, REG_RRSR + 2);
+ res = rtw_read8(Adapter, REG_BWOPMODE, ®BwOpMode);
+ if (res)
+ return;
+
+ res = rtw_read8(Adapter, REG_RRSR + 2, ®RRSR_RSC);
+ if (res)
+ return;
switch (pHalData->CurrentChannelBW) {
case HT_CHANNEL_WIDTH_20:
diff --git a/drivers/staging/r8188eu/hal/usb_halinit.c b/drivers/staging/r8188eu/hal/usb_halinit.c
index 895619fea501..5540d5ad07d3 100644
--- a/drivers/staging/r8188eu/hal/usb_halinit.c
+++ b/drivers/staging/r8188eu/hal/usb_halinit.c
@@ -81,6 +81,7 @@ static void _InitInterrupt(struct adapter *Adapter)
{
u32 imr, imr_ex;
u8 usb_opt;
+ int res;
/* HISR write one to clear */
rtw_write32(Adapter, REG_HISR_88E, 0xFFFFFFFF);
@@ -94,7 +95,9 @@ static void _InitInterrupt(struct adapter *Adapter)
/* REG_USB_SPECIAL_OPTION - BIT(4) */
/* 0; Use interrupt endpoint to upload interrupt pkt */
/* 1; Use bulk endpoint to upload interrupt pkt, */
- usb_opt = rtw_read8(Adapter, REG_USB_SPECIAL_OPTION);
+ res = rtw_read8(Adapter, REG_USB_SPECIAL_OPTION, &usb_opt);
+ if (res)
+ return;
if (adapter_to_dvobj(Adapter)->pusbdev->speed == USB_SPEED_HIGH)
usb_opt = usb_opt | (INT_BULK_SEL);
@@ -363,8 +366,12 @@ static void _InitEDCA(struct adapter *Adapter)
static void _InitRetryFunction(struct adapter *Adapter)
{
u8 value8;
+ int res;
+
+ res = rtw_read8(Adapter, REG_FWHW_TXQ_CTRL, &value8);
+ if (res)
+ return;
- value8 = rtw_read8(Adapter, REG_FWHW_TXQ_CTRL);
value8 |= EN_AMPDU_RTY_NEW;
rtw_write8(Adapter, REG_FWHW_TXQ_CTRL, value8);
@@ -423,9 +430,15 @@ usb_AggSettingRxUpdate(
{
u8 valueDMA;
u8 valueUSB;
+ int res;
- valueDMA = rtw_read8(Adapter, REG_TRXDMA_CTRL);
- valueUSB = rtw_read8(Adapter, REG_USB_SPECIAL_OPTION);
+ res = rtw_read8(Adapter, REG_TRXDMA_CTRL, &valueDMA);
+ if (res)
+ return;
+
+ res = rtw_read8(Adapter, REG_USB_SPECIAL_OPTION, &valueUSB);
+ if (res)
+ return;
valueDMA |= RXDMA_AGG_EN;
valueUSB &= ~USB_AGG_EN;
@@ -446,9 +459,11 @@ static void InitUsbAggregationSetting(struct adapter *Adapter)
usb_AggSettingRxUpdate(Adapter);
}
-static void _InitBeaconParameters(struct adapter *Adapter)
+/* FIXME: add error handling in callers */
+static int _InitBeaconParameters(struct adapter *Adapter)
{
struct hal_data_8188e *haldata = &Adapter->haldata;
+ int res;
rtw_write16(Adapter, REG_BCN_CTRL, 0x1010);
@@ -461,9 +476,19 @@ static void _InitBeaconParameters(struct adapter *Adapter)
/* beacause test chip does not contension before sending beacon. by tynli. 2009.11.03 */
rtw_write16(Adapter, REG_BCNTCFG, 0x660F);
- haldata->RegFwHwTxQCtrl = rtw_read8(Adapter, REG_FWHW_TXQ_CTRL + 2);
- haldata->RegReg542 = rtw_read8(Adapter, REG_TBTT_PROHIBIT + 2);
- haldata->RegCR_1 = rtw_read8(Adapter, REG_CR + 1);
+ res = rtw_read8(Adapter, REG_FWHW_TXQ_CTRL + 2, &haldata->RegFwHwTxQCtrl);
+ if (res)
+ return res;
+
+ res = rtw_read8(Adapter, REG_TBTT_PROHIBIT + 2, &haldata->RegReg542);
+ if (res)
+ return res;
+
+ res = rtw_read8(Adapter, REG_CR + 1, &haldata->RegCR_1);
+ if (res)
+ return res;
+
+ return 0;
}
static void _BeaconFunctionEnable(struct adapter *Adapter,
@@ -514,6 +539,7 @@ u32 rtl8188eu_hal_init(struct adapter *Adapter)
u16 value16;
u8 txpktbuf_bndy;
u32 status = _SUCCESS;
+ int res;
struct hal_data_8188e *haldata = &Adapter->haldata;
struct pwrctrl_priv *pwrctrlpriv = &Adapter->pwrctrlpriv;
struct registry_priv *pregistrypriv = &Adapter->registrypriv;
@@ -620,7 +646,10 @@ u32 rtl8188eu_hal_init(struct adapter *Adapter)
/* Enable TX Report */
/* Enable Tx Report Timer */
- value8 = rtw_read8(Adapter, REG_TX_RPT_CTRL);
+ res = rtw_read8(Adapter, REG_TX_RPT_CTRL, &value8);
+ if (res)
+ return _FAIL;
+
rtw_write8(Adapter, REG_TX_RPT_CTRL, (value8 | BIT(1) | BIT(0)));
/* Set MAX RPT MACID */
rtw_write8(Adapter, REG_TX_RPT_CTRL + 1, 2);/* FOR sta mode ,0: bc/mc ,1:AP */
@@ -714,9 +743,13 @@ static void CardDisableRTL8188EU(struct adapter *Adapter)
{
u8 val8;
struct hal_data_8188e *haldata = &Adapter->haldata;
+ int res;
/* Stop Tx Report Timer. 0x4EC[Bit1]=b'0 */
- val8 = rtw_read8(Adapter, REG_TX_RPT_CTRL);
+ res = rtw_read8(Adapter, REG_TX_RPT_CTRL, &val8);
+ if (res)
+ return;
+
rtw_write8(Adapter, REG_TX_RPT_CTRL, val8 & (~BIT(1)));
/* stop rx */
@@ -727,10 +760,16 @@ static void CardDisableRTL8188EU(struct adapter *Adapter)
/* 2. 0x1F[7:0] = 0 turn off RF */
- val8 = rtw_read8(Adapter, REG_MCUFWDL);
+ res = rtw_read8(Adapter, REG_MCUFWDL, &val8);
+ if (res)
+ return;
+
if ((val8 & RAM_DL_SEL) && Adapter->bFWReady) { /* 8051 RAM code */
/* Reset MCU 0x2[10]=0. */
- val8 = rtw_read8(Adapter, REG_SYS_FUNC_EN + 1);
+ res = rtw_read8(Adapter, REG_SYS_FUNC_EN + 1, &val8);
+ if (res)
+ return;
+
val8 &= ~BIT(2); /* 0x2[10], FEN_CPUEN */
rtw_write8(Adapter, REG_SYS_FUNC_EN + 1, val8);
}
@@ -740,26 +779,45 @@ static void CardDisableRTL8188EU(struct adapter *Adapter)
/* YJ,add,111212 */
/* Disable 32k */
- val8 = rtw_read8(Adapter, REG_32K_CTRL);
+ res = rtw_read8(Adapter, REG_32K_CTRL, &val8);
+ if (res)
+ return;
+
rtw_write8(Adapter, REG_32K_CTRL, val8 & (~BIT(0)));
/* Card disable power action flow */
HalPwrSeqCmdParsing(Adapter, Rtl8188E_NIC_DISABLE_FLOW);
/* Reset MCU IO Wrapper */
- val8 = rtw_read8(Adapter, REG_RSV_CTRL + 1);
+ res = rtw_read8(Adapter, REG_RSV_CTRL + 1, &val8);
+ if (res)
+ return;
+
rtw_write8(Adapter, REG_RSV_CTRL + 1, (val8 & (~BIT(3))));
- val8 = rtw_read8(Adapter, REG_RSV_CTRL + 1);
+
+ res = rtw_read8(Adapter, REG_RSV_CTRL + 1, &val8);
+ if (res)
+ return;
+
rtw_write8(Adapter, REG_RSV_CTRL + 1, val8 | BIT(3));
/* YJ,test add, 111207. For Power Consumption. */
- val8 = rtw_read8(Adapter, GPIO_IN);
+ res = rtw_read8(Adapter, GPIO_IN, &val8);
+ if (res)
+ return;
+
rtw_write8(Adapter, GPIO_OUT, val8);
rtw_write8(Adapter, GPIO_IO_SEL, 0xFF);/* Reg0x46 */
- val8 = rtw_read8(Adapter, REG_GPIO_IO_SEL);
+ res = rtw_read8(Adapter, REG_GPIO_IO_SEL, &val8);
+ if (res)
+ return;
+
rtw_write8(Adapter, REG_GPIO_IO_SEL, (val8 << 4));
- val8 = rtw_read8(Adapter, REG_GPIO_IO_SEL + 1);
+ res = rtw_read8(Adapter, REG_GPIO_IO_SEL + 1, &val8);
+ if (res)
+ return;
+
rtw_write8(Adapter, REG_GPIO_IO_SEL + 1, val8 | 0x0F);/* Reg0x43 */
rtw_write32(Adapter, REG_BB_PAD_CTRL, 0x00080808);/* set LNA ,TRSW,EX_PA Pin to output mode */
haldata->bMacPwrCtrlOn = false;
@@ -830,9 +888,13 @@ void ReadAdapterInfo8188EU(struct adapter *Adapter)
struct eeprom_priv *eeprom = &Adapter->eeprompriv;
struct led_priv *ledpriv = &Adapter->ledpriv;
u8 eeValue;
+ int res;
/* check system boot selection */
- eeValue = rtw_read8(Adapter, REG_9346CR);
+ res = rtw_read8(Adapter, REG_9346CR, &eeValue);
+ if (res)
+ return;
+
eeprom->EepromOrEfuse = (eeValue & BOOT_FROM_EEPROM);
eeprom->bautoload_fail_flag = !(eeValue & EEPROM_EN);
@@ -887,12 +949,21 @@ static void hw_var_set_opmode(struct adapter *Adapter, u8 *val)
{
u8 val8;
u8 mode = *((u8 *)val);
+ int res;
/* disable Port0 TSF update */
- rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL) | BIT(4));
+ res = rtw_read8(Adapter, REG_BCN_CTRL, &val8);
+ if (res)
+ return;
+
+ rtw_write8(Adapter, REG_BCN_CTRL, val8 | BIT(4));
/* set net_type */
- val8 = rtw_read8(Adapter, MSR) & 0x0c;
+ res = rtw_read8(Adapter, MSR, &val8);
+ if (res)
+ return;
+
+ val8 &= 0x0c;
val8 |= mode;
rtw_write8(Adapter, MSR, val8);
@@ -927,14 +998,22 @@ static void hw_var_set_opmode(struct adapter *Adapter, u8 *val)
rtw_write8(Adapter, REG_DUAL_TSF_RST, BIT(0));
/* BIT(3) - If set 0, hw will clr bcnq when tx becon ok/fail or port 0 */
- rtw_write8(Adapter, REG_MBID_NUM, rtw_read8(Adapter, REG_MBID_NUM) | BIT(3) | BIT(4));
+ res = rtw_read8(Adapter, REG_MBID_NUM, &val8);
+ if (res)
+ return;
+
+ rtw_write8(Adapter, REG_MBID_NUM, val8 | BIT(3) | BIT(4));
/* enable BCN0 Function for if1 */
/* don't enable update TSF0 for if1 (due to TSF update when beacon/probe rsp are received) */
rtw_write8(Adapter, REG_BCN_CTRL, (DIS_TSF_UDT0_NORMAL_CHIP | EN_BCN_FUNCTION | BIT(1)));
/* dis BCN1 ATIM WND if if2 is station */
- rtw_write8(Adapter, REG_BCN_CTRL_1, rtw_read8(Adapter, REG_BCN_CTRL_1) | BIT(0));
+ res = rtw_read8(Adapter, REG_BCN_CTRL_1, &val8);
+ if (res)
+ return;
+
+ rtw_write8(Adapter, REG_BCN_CTRL_1, val8 | BIT(0));
}
}
@@ -943,6 +1022,8 @@ void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
struct hal_data_8188e *haldata = &Adapter->haldata;
struct dm_priv *pdmpriv = &haldata->dmpriv;
struct odm_dm_struct *podmpriv = &haldata->odmpriv;
+ u8 reg;
+ int res;
switch (variable) {
case HW_VAR_SET_OPMODE:
@@ -970,7 +1051,11 @@ void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
/* Set RRSR rate table. */
rtw_write8(Adapter, REG_RRSR, BrateCfg & 0xff);
rtw_write8(Adapter, REG_RRSR + 1, (BrateCfg >> 8) & 0xff);
- rtw_write8(Adapter, REG_RRSR + 2, rtw_read8(Adapter, REG_RRSR + 2) & 0xf0);
+ res = rtw_read8(Adapter, REG_RRSR + 2, ®);
+ if (res)
+ return;
+
+ rtw_write8(Adapter, REG_RRSR + 2, reg & 0xf0);
/* Set RTS initial rate */
while (BrateCfg > 0x1) {
@@ -994,13 +1079,21 @@ void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
StopTxBeacon(Adapter);
/* disable related TSF function */
- rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL) & (~BIT(3)));
+ res = rtw_read8(Adapter, REG_BCN_CTRL, ®);
+ if (res)
+ return;
+
+ rtw_write8(Adapter, REG_BCN_CTRL, reg & (~BIT(3)));
rtw_write32(Adapter, REG_TSFTR, tsf);
rtw_write32(Adapter, REG_TSFTR + 4, tsf >> 32);
/* enable related TSF function */
- rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL) | BIT(3));
+ res = rtw_read8(Adapter, REG_BCN_CTRL, ®);
+ if (res)
+ return;
+
+ rtw_write8(Adapter, REG_BCN_CTRL, reg | BIT(3));
if (((pmlmeinfo->state & 0x03) == WIFI_FW_ADHOC_STATE) || ((pmlmeinfo->state & 0x03) == WIFI_FW_AP_STATE))
ResumeTxBeacon(Adapter);
@@ -1016,7 +1109,11 @@ void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
rtw_write16(Adapter, REG_RXFLTMAP2, 0x00);
/* disable update TSF */
- rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL) | BIT(4));
+ res = rtw_read8(Adapter, REG_BCN_CTRL, ®);
+ if (res)
+ return;
+
+ rtw_write8(Adapter, REG_BCN_CTRL, reg | BIT(4));
} else { /* sitesurvey done */
struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv;
struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info;
@@ -1027,11 +1124,19 @@ void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
rtw_write16(Adapter, REG_RXFLTMAP2, 0xFFFF);
/* enable update TSF */
- rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL) & (~BIT(4)));
+ res = rtw_read8(Adapter, REG_BCN_CTRL, ®);
+ if (res)
+ return;
+
+ rtw_write8(Adapter, REG_BCN_CTRL, reg & (~BIT(4)));
} else if ((pmlmeinfo->state & 0x03) == WIFI_FW_AP_STATE) {
rtw_write16(Adapter, REG_RXFLTMAP2, 0xFFFF);
/* enable update TSF */
- rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL) & (~BIT(4)));
+ res = rtw_read8(Adapter, REG_BCN_CTRL, ®);
+ if (res)
+ return;
+
+ rtw_write8(Adapter, REG_BCN_CTRL, reg & (~BIT(4)));
}
rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR) | RCR_CBSSID_BCN);
}
@@ -1166,6 +1271,8 @@ void SetBeaconRelatedRegisters8188EUsb(struct adapter *adapt)
struct mlme_ext_priv *pmlmeext = &adapt->mlmeextpriv;
struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info;
u32 bcn_ctrl_reg = REG_BCN_CTRL;
+ int res;
+ u8 reg;
/* reset TSF, enable update TSF, correcting TSF On Beacon */
/* BCN interval */
@@ -1191,7 +1298,11 @@ void SetBeaconRelatedRegisters8188EUsb(struct adapter *adapt)
ResumeTxBeacon(adapt);
- rtw_write8(adapt, bcn_ctrl_reg, rtw_read8(adapt, bcn_ctrl_reg) | BIT(1));
+ res = rtw_read8(adapt, bcn_ctrl_reg, ®);
+ if (res)
+ return;
+
+ rtw_write8(adapt, bcn_ctrl_reg, reg | BIT(1));
}
void rtl8188eu_init_default_value(struct adapter *adapt)
diff --git a/drivers/staging/r8188eu/hal/usb_ops_linux.c b/drivers/staging/r8188eu/hal/usb_ops_linux.c
index d5e674542a78..f399a7fd8b97 100644
--- a/drivers/staging/r8188eu/hal/usb_ops_linux.c
+++ b/drivers/staging/r8188eu/hal/usb_ops_linux.c
@@ -94,16 +94,13 @@ static int usb_write(struct intf_hdl *intf, u16 value, void *data, u8 size)
return status;
}
-u8 rtw_read8(struct adapter *adapter, u32 addr)
+int __must_check rtw_read8(struct adapter *adapter, u32 addr, u8 *data)
{
struct io_priv *io_priv = &adapter->iopriv;
struct intf_hdl *intf = &io_priv->intf;
u16 value = addr & 0xffff;
- u8 data;
- usb_read(intf, value, &data, 1);
-
- return data;
+ return usb_read(intf, value, data, 1);
}
u16 rtw_read16(struct adapter *adapter, u32 addr)
diff --git a/drivers/staging/r8188eu/include/rtw_io.h b/drivers/staging/r8188eu/include/rtw_io.h
index 0e390eda5b4d..c03646e9658d 100644
--- a/drivers/staging/r8188eu/include/rtw_io.h
+++ b/drivers/staging/r8188eu/include/rtw_io.h
@@ -220,7 +220,7 @@ void unregister_intf_hdl(struct intf_hdl *pintfhdl);
void _rtw_attrib_read(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
void _rtw_attrib_write(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
-u8 rtw_read8(struct adapter *adapter, u32 addr);
+int __must_check rtw_read8(struct adapter *adapter, u32 addr, u8 *data);
u16 rtw_read16(struct adapter *adapter, u32 addr);
u32 rtw_read32(struct adapter *adapter, u32 addr);
void _rtw_read_mem(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
diff --git a/drivers/staging/r8188eu/os_dep/ioctl_linux.c b/drivers/staging/r8188eu/os_dep/ioctl_linux.c
index 1b09462ca908..168f4ec99a03 100644
--- a/drivers/staging/r8188eu/os_dep/ioctl_linux.c
+++ b/drivers/staging/r8188eu/os_dep/ioctl_linux.c
@@ -3178,6 +3178,7 @@ static void rtw_set_dynamic_functions(struct adapter *adapter, u8 dm_func)
{
struct hal_data_8188e *haldata = &adapter->haldata;
struct odm_dm_struct *odmpriv = &haldata->odmpriv;
+ int res;
switch (dm_func) {
case 0:
@@ -3193,7 +3194,9 @@ static void rtw_set_dynamic_functions(struct adapter *adapter, u8 dm_func)
if (!(odmpriv->SupportAbility & DYNAMIC_BB_DIG)) {
struct rtw_dig *digtable = &odmpriv->DM_DigTable;
- digtable->CurIGValue = rtw_read8(adapter, 0xc50);
+ res = rtw_read8(adapter, 0xc50, &digtable->CurIGValue);
+ (void)res;
+ /* FIXME: return an error to caller */
}
odmpriv->SupportAbility = DYNAMIC_ALL_FUNC_ENABLE;
break;
@@ -3329,8 +3332,9 @@ static int rtw_dbg_port(struct net_device *dev,
u16 reg = arg;
u16 start_value = 0;
u32 write_num = extra_arg;
- int i;
+ int i, res;
struct xmit_frame *xmit_frame;
+ u8 val8;
xmit_frame = rtw_IOL_accquire_xmit_frame(padapter);
if (!xmit_frame) {
@@ -3343,7 +3347,8 @@ static int rtw_dbg_port(struct net_device *dev,
if (rtl8188e_IOL_exec_cmds_sync(padapter, xmit_frame, 5000, 0) != _SUCCESS)
ret = -EPERM;
- rtw_read8(padapter, reg);
+ /* FIXME: is this read necessary? */
+ res = rtw_read8(padapter, reg, &val8);
}
break;
--
2.36.1