This include file is about to disapear. In addition it is
useless for this code. So it is time to remove it.
Signed-off-by: Nicolas Ferre <[email protected]>
---
Hi Mark,
This patch is needed before we integrate the folling one. It will allow us to
remove the mach/gpio.h header file for AT91 and will be a move forward in the
single zImage direction.
So, can you have a look and if you agree, we may add both in arm-soc during
the 3.15-rc phase...
Thanks, bye
sound/soc/atmel/sam9g20_wm8731.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c
index 174bd546c08b..bb1149126c54 100644
--- a/sound/soc/atmel/sam9g20_wm8731.c
+++ b/sound/soc/atmel/sam9g20_wm8731.c
@@ -48,7 +48,6 @@
#include <asm/mach-types.h>
#include <mach/hardware.h>
-#include <mach/gpio.h>
#include "../codecs/wm8731.h"
#include "atmel-pcm.h"
--
1.8.2.2
From: Linus Walleij <[email protected]>
This moves the <mach/gpio.h> header in the AT91 platform down
into the machine directory and removes the reliance on
MACH_NEED_GPIO_H from the AT91.
This does not move the platform to GENERIC_GPIO but localize
the remaining work to be done for this to the mach-at91
folder.
Signed-off-by: Linus Walleij <[email protected]>
[[email protected]: adapt to newer kernel, add rsi-ews board]
Signed-off-by: Nicolas Ferre <[email protected]>
---
ChangeLog v3->v4:
- removal of board-qil-a9260.c board as it was moved to DT in 3.15
- modification of board-rsi-ews.c needed to avoid compilation issue
- dependency on a path to remove a call to mach/gpio.h in a sound driver
(sam9g20_wm8731.c)
ChangeLog v2->v3:
- Move a symbol from the pinctrl driver that was for some reason
put into the <mach/gpio.h> header over to the <mach/hardware>
file. Add FIXME to investigate the proper solution for this.
arch/arm/Kconfig | 1 -
arch/arm/mach-at91/at91rm9200_devices.c | 1 +
arch/arm/mach-at91/at91sam9260_devices.c | 2 +-
arch/arm/mach-at91/at91sam9261_devices.c | 2 +-
arch/arm/mach-at91/at91sam9263_devices.c | 1 +
arch/arm/mach-at91/at91sam9g45_devices.c | 1 +
arch/arm/mach-at91/at91sam9rl_devices.c | 1 +
arch/arm/mach-at91/board-1arm.c | 2 +-
arch/arm/mach-at91/board-afeb-9260v1.c | 1 +
arch/arm/mach-at91/board-cam60.c | 1 +
arch/arm/mach-at91/board-carmeva.c | 1 +
arch/arm/mach-at91/board-cpu9krea.c | 1 +
arch/arm/mach-at91/board-cpuat91.c | 2 +
arch/arm/mach-at91/board-csb337.c | 2 +-
arch/arm/mach-at91/board-csb637.c | 1 +
arch/arm/mach-at91/board-eb9200.c | 1 +
arch/arm/mach-at91/board-ecbat91.c | 1 +
arch/arm/mach-at91/board-eco920.c | 2 +
arch/arm/mach-at91/board-flexibity.c | 1 +
arch/arm/mach-at91/board-foxg20.c | 1 +
arch/arm/mach-at91/board-gsia18s.c | 1 +
arch/arm/mach-at91/board-kafa.c | 1 +
arch/arm/mach-at91/board-kb9202.c | 1 +
arch/arm/mach-at91/board-pcontrol-g20.c | 1 +
arch/arm/mach-at91/board-picotux200.c | 1 +
arch/arm/mach-at91/board-rm9200ek.c | 1 +
arch/arm/mach-at91/board-rsi-ews.c | 1 +
arch/arm/mach-at91/board-sam9-l9260.c | 1 +
arch/arm/mach-at91/board-sam9260ek.c | 1 +
arch/arm/mach-at91/board-sam9261ek.c | 1 +
arch/arm/mach-at91/board-sam9263ek.c | 1 +
arch/arm/mach-at91/board-sam9g20ek.c | 1 +
arch/arm/mach-at91/board-sam9m10g45ek.c | 1 +
arch/arm/mach-at91/board-sam9rlek.c | 1 +
arch/arm/mach-at91/board-snapper9260.c | 1 +
arch/arm/mach-at91/board-stamp9g20.c | 1 +
arch/arm/mach-at91/board-yl-9200.c | 1 +
arch/arm/mach-at91/gpio.c | 1 +
arch/arm/mach-at91/gpio.h | 214 +++++++++++++++++++++++++++
arch/arm/mach-at91/include/mach/gpio.h | 222 -----------------------------
arch/arm/mach-at91/include/mach/hardware.h | 15 ++
arch/arm/mach-at91/leds.c | 1 +
arch/arm/mach-at91/pm.c | 1 +
43 files changed, 270 insertions(+), 227 deletions(-)
create mode 100644 arch/arm/mach-at91/gpio.h
delete mode 100644 arch/arm/mach-at91/include/mach/gpio.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ab438cb5af55..7d401e5ad07a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -375,7 +375,6 @@ config ARCH_AT91
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select IRQ_DOMAIN
- select NEED_MACH_GPIO_H
select NEED_MACH_IO_H if PCCARD
select PINCTRL
select PINCTRL_AT91 if USE_OF
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index f3f19f21352a..4860918b411e 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -25,6 +25,7 @@
#include "board.h"
#include "generic.h"
+#include "gpio.h"
/* --------------------------------------------------------------------
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 8b1b0a870025..845e61e99fde 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -29,7 +29,7 @@
#include "board.h"
#include "generic.h"
-
+#include "gpio.h"
/* --------------------------------------------------------------------
* USB Host
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 80e35895d28f..43b21f456f6e 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -29,7 +29,7 @@
#include "board.h"
#include "generic.h"
-
+#include "gpio.h"
/* --------------------------------------------------------------------
* USB Host
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 43d53d6156dd..953616e5dbcb 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -28,6 +28,7 @@
#include "board.h"
#include "generic.h"
+#include "gpio.h"
/* --------------------------------------------------------------------
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 77b04c2edd78..69e01adf5d99 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -39,6 +39,7 @@
#include "board.h"
#include "generic.h"
#include "clock.h"
+#include "gpio.h"
/* --------------------------------------------------------------------
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 428fc412aaf1..ba7ebd9dd4bb 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -26,6 +26,7 @@
#include "board.h"
#include "generic.h"
+#include "gpio.h"
/* --------------------------------------------------------------------
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 35ab632bbf68..3f6dbcc34022 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -39,7 +39,7 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
-
+#include "gpio.h"
static void __init onearm_init_early(void)
{
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index f95e31cda4b3..597c649170aa 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -46,6 +46,7 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init afeb9260_init_early(void)
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index 112e867c4abe..a30502c8d379 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -44,6 +44,7 @@
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
static void __init cam60_init_early(void)
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 92983050a9bd..47313d3ee037 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -39,6 +39,7 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init carmeva_init_early(void)
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index 008527efdbcf..2037f78c84e7 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -48,6 +48,7 @@
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
static void __init cpu9krea_init_early(void)
{
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index 42f1353a4baf..c094350c9314 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -43,6 +43,8 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
+
static struct gpio_led cpuat91_leds[] = {
{
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index e5fde215225b..0e35a45cf8d4 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -42,7 +42,7 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
-
+#include "gpio.h"
static void __init csb337_init_early(void)
{
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index fdf11061c577..18d027f529a8 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -39,6 +39,7 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init csb637_init_early(void)
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index f9be8161bbfa..aa457a8b22f5 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -38,6 +38,7 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init eb9200_init_early(void)
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index b2fcd71262ba..ede1373ccaba 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -42,6 +42,7 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init ecb_at91init_early(void)
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index 77de410efc90..4e75321a8f2a 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -31,6 +31,8 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
+
static void __init eco920_init_early(void)
{
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index 737c08563628..68f1ab6bd08f 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -37,6 +37,7 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init flexibity_init_early(void)
{
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index c20a870ea9c9..8b22c60bb238 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -47,6 +47,7 @@
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
/*
* The FOX Board G20 hardware comes as the "Netus G20" board with
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index 416bae8435ee..b729dd1271bf 100644
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -39,6 +39,7 @@
#include "generic.h"
#include "gsia18s.h"
#include "stamp9g20.h"
+#include "gpio.h"
static void __init gsia18s_init_early(void)
{
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 88e2f5d2d16d..93b1df42f639 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -39,6 +39,7 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init kafa_init_early(void)
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 0c519d9ebffc..d58d36225e08 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -42,6 +42,7 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init kb9202_init_early(void)
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index 5f25fa54eb93..b48d95ec5152 100644
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -37,6 +37,7 @@
#include "sam9_smc.h"
#include "generic.h"
#include "stamp9g20.h"
+#include "gpio.h"
static void __init pcontrol_g20_init_early(void)
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index ab2b2ec36c14..2c0f2d554d84 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -43,6 +43,7 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init picotux200_init_early(void)
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 8b17dadc1aba..953cea416754 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -45,6 +45,7 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init ek_init_early(void)
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
index f6d7f1958c7e..f28e8b74df4b 100644
--- a/arch/arm/mach-at91/board-rsi-ews.c
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -31,6 +31,7 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init rsi_ews_init_early(void)
{
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 43ee4dc43b50..d24dda67e2d3 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -43,6 +43,7 @@
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
static void __init ek_init_early(void)
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index f4f8735315da..65dea12d685e 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -49,6 +49,7 @@
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
static void __init ek_init_early(void)
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 473546b9408b..4637432de08f 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -53,6 +53,7 @@
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
static void __init ek_init_early(void)
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 2f931915c80c..cd2726ee5add 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -52,6 +52,7 @@
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
static void __init ek_init_early(void)
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index f9cd1f2c7146..e1be6e25b380 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -50,6 +50,7 @@
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
/*
* board revision encoding
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index ef39078c8ce2..5cd95ede623e 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -50,6 +50,7 @@
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
static void __init ek_init_early(void)
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 604eecf6cd70..6b81e4671646 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -38,6 +38,7 @@
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
static void __init ek_init_early(void)
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index f1d49e929ccb..1b870e6def0c 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -38,6 +38,7 @@
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
#define SNAPPER9260_IO_EXP_GPIO(x) (NR_BUILTIN_GPIO + (x))
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index e4a5ac17cdbc..3b575036ff96 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -32,6 +32,7 @@
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
void __init stamp9g20_init_early(void)
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index be083771df2e..46fdb0c68a68 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -50,6 +50,7 @@
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init yl9200_init_early(void)
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index a5afcf76550e..12ed05bbdc5c 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -29,6 +29,7 @@
#include <mach/at91_pio.h>
#include "generic.h"
+#include "gpio.h"
#define MAX_NB_GPIO_PER_BANK 32
diff --git a/arch/arm/mach-at91/gpio.h b/arch/arm/mach-at91/gpio.h
new file mode 100644
index 000000000000..eed465ab0dd7
--- /dev/null
+++ b/arch/arm/mach-at91/gpio.h
@@ -0,0 +1,214 @@
+/*
+ * arch/arm/mach-at91/include/mach/gpio.h
+ *
+ * Copyright (C) 2005 HP Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_AT91RM9200_GPIO_H
+#define __ASM_ARCH_AT91RM9200_GPIO_H
+
+#include <linux/kernel.h>
+#include <asm/irq.h>
+
+#define MAX_GPIO_BANKS 5
+#define NR_BUILTIN_GPIO (MAX_GPIO_BANKS * 32)
+
+/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
+
+#define AT91_PIN_PA0 (0x00 + 0)
+#define AT91_PIN_PA1 (0x00 + 1)
+#define AT91_PIN_PA2 (0x00 + 2)
+#define AT91_PIN_PA3 (0x00 + 3)
+#define AT91_PIN_PA4 (0x00 + 4)
+#define AT91_PIN_PA5 (0x00 + 5)
+#define AT91_PIN_PA6 (0x00 + 6)
+#define AT91_PIN_PA7 (0x00 + 7)
+#define AT91_PIN_PA8 (0x00 + 8)
+#define AT91_PIN_PA9 (0x00 + 9)
+#define AT91_PIN_PA10 (0x00 + 10)
+#define AT91_PIN_PA11 (0x00 + 11)
+#define AT91_PIN_PA12 (0x00 + 12)
+#define AT91_PIN_PA13 (0x00 + 13)
+#define AT91_PIN_PA14 (0x00 + 14)
+#define AT91_PIN_PA15 (0x00 + 15)
+#define AT91_PIN_PA16 (0x00 + 16)
+#define AT91_PIN_PA17 (0x00 + 17)
+#define AT91_PIN_PA18 (0x00 + 18)
+#define AT91_PIN_PA19 (0x00 + 19)
+#define AT91_PIN_PA20 (0x00 + 20)
+#define AT91_PIN_PA21 (0x00 + 21)
+#define AT91_PIN_PA22 (0x00 + 22)
+#define AT91_PIN_PA23 (0x00 + 23)
+#define AT91_PIN_PA24 (0x00 + 24)
+#define AT91_PIN_PA25 (0x00 + 25)
+#define AT91_PIN_PA26 (0x00 + 26)
+#define AT91_PIN_PA27 (0x00 + 27)
+#define AT91_PIN_PA28 (0x00 + 28)
+#define AT91_PIN_PA29 (0x00 + 29)
+#define AT91_PIN_PA30 (0x00 + 30)
+#define AT91_PIN_PA31 (0x00 + 31)
+
+#define AT91_PIN_PB0 (0x20 + 0)
+#define AT91_PIN_PB1 (0x20 + 1)
+#define AT91_PIN_PB2 (0x20 + 2)
+#define AT91_PIN_PB3 (0x20 + 3)
+#define AT91_PIN_PB4 (0x20 + 4)
+#define AT91_PIN_PB5 (0x20 + 5)
+#define AT91_PIN_PB6 (0x20 + 6)
+#define AT91_PIN_PB7 (0x20 + 7)
+#define AT91_PIN_PB8 (0x20 + 8)
+#define AT91_PIN_PB9 (0x20 + 9)
+#define AT91_PIN_PB10 (0x20 + 10)
+#define AT91_PIN_PB11 (0x20 + 11)
+#define AT91_PIN_PB12 (0x20 + 12)
+#define AT91_PIN_PB13 (0x20 + 13)
+#define AT91_PIN_PB14 (0x20 + 14)
+#define AT91_PIN_PB15 (0x20 + 15)
+#define AT91_PIN_PB16 (0x20 + 16)
+#define AT91_PIN_PB17 (0x20 + 17)
+#define AT91_PIN_PB18 (0x20 + 18)
+#define AT91_PIN_PB19 (0x20 + 19)
+#define AT91_PIN_PB20 (0x20 + 20)
+#define AT91_PIN_PB21 (0x20 + 21)
+#define AT91_PIN_PB22 (0x20 + 22)
+#define AT91_PIN_PB23 (0x20 + 23)
+#define AT91_PIN_PB24 (0x20 + 24)
+#define AT91_PIN_PB25 (0x20 + 25)
+#define AT91_PIN_PB26 (0x20 + 26)
+#define AT91_PIN_PB27 (0x20 + 27)
+#define AT91_PIN_PB28 (0x20 + 28)
+#define AT91_PIN_PB29 (0x20 + 29)
+#define AT91_PIN_PB30 (0x20 + 30)
+#define AT91_PIN_PB31 (0x20 + 31)
+
+#define AT91_PIN_PC0 (0x40 + 0)
+#define AT91_PIN_PC1 (0x40 + 1)
+#define AT91_PIN_PC2 (0x40 + 2)
+#define AT91_PIN_PC3 (0x40 + 3)
+#define AT91_PIN_PC4 (0x40 + 4)
+#define AT91_PIN_PC5 (0x40 + 5)
+#define AT91_PIN_PC6 (0x40 + 6)
+#define AT91_PIN_PC7 (0x40 + 7)
+#define AT91_PIN_PC8 (0x40 + 8)
+#define AT91_PIN_PC9 (0x40 + 9)
+#define AT91_PIN_PC10 (0x40 + 10)
+#define AT91_PIN_PC11 (0x40 + 11)
+#define AT91_PIN_PC12 (0x40 + 12)
+#define AT91_PIN_PC13 (0x40 + 13)
+#define AT91_PIN_PC14 (0x40 + 14)
+#define AT91_PIN_PC15 (0x40 + 15)
+#define AT91_PIN_PC16 (0x40 + 16)
+#define AT91_PIN_PC17 (0x40 + 17)
+#define AT91_PIN_PC18 (0x40 + 18)
+#define AT91_PIN_PC19 (0x40 + 19)
+#define AT91_PIN_PC20 (0x40 + 20)
+#define AT91_PIN_PC21 (0x40 + 21)
+#define AT91_PIN_PC22 (0x40 + 22)
+#define AT91_PIN_PC23 (0x40 + 23)
+#define AT91_PIN_PC24 (0x40 + 24)
+#define AT91_PIN_PC25 (0x40 + 25)
+#define AT91_PIN_PC26 (0x40 + 26)
+#define AT91_PIN_PC27 (0x40 + 27)
+#define AT91_PIN_PC28 (0x40 + 28)
+#define AT91_PIN_PC29 (0x40 + 29)
+#define AT91_PIN_PC30 (0x40 + 30)
+#define AT91_PIN_PC31 (0x40 + 31)
+
+#define AT91_PIN_PD0 (0x60 + 0)
+#define AT91_PIN_PD1 (0x60 + 1)
+#define AT91_PIN_PD2 (0x60 + 2)
+#define AT91_PIN_PD3 (0x60 + 3)
+#define AT91_PIN_PD4 (0x60 + 4)
+#define AT91_PIN_PD5 (0x60 + 5)
+#define AT91_PIN_PD6 (0x60 + 6)
+#define AT91_PIN_PD7 (0x60 + 7)
+#define AT91_PIN_PD8 (0x60 + 8)
+#define AT91_PIN_PD9 (0x60 + 9)
+#define AT91_PIN_PD10 (0x60 + 10)
+#define AT91_PIN_PD11 (0x60 + 11)
+#define AT91_PIN_PD12 (0x60 + 12)
+#define AT91_PIN_PD13 (0x60 + 13)
+#define AT91_PIN_PD14 (0x60 + 14)
+#define AT91_PIN_PD15 (0x60 + 15)
+#define AT91_PIN_PD16 (0x60 + 16)
+#define AT91_PIN_PD17 (0x60 + 17)
+#define AT91_PIN_PD18 (0x60 + 18)
+#define AT91_PIN_PD19 (0x60 + 19)
+#define AT91_PIN_PD20 (0x60 + 20)
+#define AT91_PIN_PD21 (0x60 + 21)
+#define AT91_PIN_PD22 (0x60 + 22)
+#define AT91_PIN_PD23 (0x60 + 23)
+#define AT91_PIN_PD24 (0x60 + 24)
+#define AT91_PIN_PD25 (0x60 + 25)
+#define AT91_PIN_PD26 (0x60 + 26)
+#define AT91_PIN_PD27 (0x60 + 27)
+#define AT91_PIN_PD28 (0x60 + 28)
+#define AT91_PIN_PD29 (0x60 + 29)
+#define AT91_PIN_PD30 (0x60 + 30)
+#define AT91_PIN_PD31 (0x60 + 31)
+
+#define AT91_PIN_PE0 (0x80 + 0)
+#define AT91_PIN_PE1 (0x80 + 1)
+#define AT91_PIN_PE2 (0x80 + 2)
+#define AT91_PIN_PE3 (0x80 + 3)
+#define AT91_PIN_PE4 (0x80 + 4)
+#define AT91_PIN_PE5 (0x80 + 5)
+#define AT91_PIN_PE6 (0x80 + 6)
+#define AT91_PIN_PE7 (0x80 + 7)
+#define AT91_PIN_PE8 (0x80 + 8)
+#define AT91_PIN_PE9 (0x80 + 9)
+#define AT91_PIN_PE10 (0x80 + 10)
+#define AT91_PIN_PE11 (0x80 + 11)
+#define AT91_PIN_PE12 (0x80 + 12)
+#define AT91_PIN_PE13 (0x80 + 13)
+#define AT91_PIN_PE14 (0x80 + 14)
+#define AT91_PIN_PE15 (0x80 + 15)
+#define AT91_PIN_PE16 (0x80 + 16)
+#define AT91_PIN_PE17 (0x80 + 17)
+#define AT91_PIN_PE18 (0x80 + 18)
+#define AT91_PIN_PE19 (0x80 + 19)
+#define AT91_PIN_PE20 (0x80 + 20)
+#define AT91_PIN_PE21 (0x80 + 21)
+#define AT91_PIN_PE22 (0x80 + 22)
+#define AT91_PIN_PE23 (0x80 + 23)
+#define AT91_PIN_PE24 (0x80 + 24)
+#define AT91_PIN_PE25 (0x80 + 25)
+#define AT91_PIN_PE26 (0x80 + 26)
+#define AT91_PIN_PE27 (0x80 + 27)
+#define AT91_PIN_PE28 (0x80 + 28)
+#define AT91_PIN_PE29 (0x80 + 29)
+#define AT91_PIN_PE30 (0x80 + 30)
+#define AT91_PIN_PE31 (0x80 + 31)
+
+#ifndef __ASSEMBLY__
+/* setup setup routines, called from board init or driver probe() */
+extern int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_C_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_D_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_gpio_output(unsigned pin, int value);
+extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on);
+extern int __init_or_module at91_set_debounce(unsigned pin, int is_on, int div);
+extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on);
+extern int __init_or_module at91_set_pulldown(unsigned pin, int is_on);
+extern int __init_or_module at91_disable_schmitt_trig(unsigned pin);
+
+/* callable at any time */
+extern int at91_set_gpio_value(unsigned pin, int value);
+extern int at91_get_gpio_value(unsigned pin);
+
+/* callable only from core power-management code */
+extern void at91_gpio_suspend(void);
+extern void at91_gpio_resume(void);
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
deleted file mode 100644
index 5fc23771c154..000000000000
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/gpio.h
- *
- * Copyright (C) 2005 HP Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_AT91RM9200_GPIO_H
-#define __ASM_ARCH_AT91RM9200_GPIO_H
-
-#include <linux/kernel.h>
-#include <asm/irq.h>
-
-#define MAX_GPIO_BANKS 5
-#define NR_BUILTIN_GPIO (MAX_GPIO_BANKS * 32)
-
-/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
-
-#define AT91_PIN_PA0 (0x00 + 0)
-#define AT91_PIN_PA1 (0x00 + 1)
-#define AT91_PIN_PA2 (0x00 + 2)
-#define AT91_PIN_PA3 (0x00 + 3)
-#define AT91_PIN_PA4 (0x00 + 4)
-#define AT91_PIN_PA5 (0x00 + 5)
-#define AT91_PIN_PA6 (0x00 + 6)
-#define AT91_PIN_PA7 (0x00 + 7)
-#define AT91_PIN_PA8 (0x00 + 8)
-#define AT91_PIN_PA9 (0x00 + 9)
-#define AT91_PIN_PA10 (0x00 + 10)
-#define AT91_PIN_PA11 (0x00 + 11)
-#define AT91_PIN_PA12 (0x00 + 12)
-#define AT91_PIN_PA13 (0x00 + 13)
-#define AT91_PIN_PA14 (0x00 + 14)
-#define AT91_PIN_PA15 (0x00 + 15)
-#define AT91_PIN_PA16 (0x00 + 16)
-#define AT91_PIN_PA17 (0x00 + 17)
-#define AT91_PIN_PA18 (0x00 + 18)
-#define AT91_PIN_PA19 (0x00 + 19)
-#define AT91_PIN_PA20 (0x00 + 20)
-#define AT91_PIN_PA21 (0x00 + 21)
-#define AT91_PIN_PA22 (0x00 + 22)
-#define AT91_PIN_PA23 (0x00 + 23)
-#define AT91_PIN_PA24 (0x00 + 24)
-#define AT91_PIN_PA25 (0x00 + 25)
-#define AT91_PIN_PA26 (0x00 + 26)
-#define AT91_PIN_PA27 (0x00 + 27)
-#define AT91_PIN_PA28 (0x00 + 28)
-#define AT91_PIN_PA29 (0x00 + 29)
-#define AT91_PIN_PA30 (0x00 + 30)
-#define AT91_PIN_PA31 (0x00 + 31)
-
-#define AT91_PIN_PB0 (0x20 + 0)
-#define AT91_PIN_PB1 (0x20 + 1)
-#define AT91_PIN_PB2 (0x20 + 2)
-#define AT91_PIN_PB3 (0x20 + 3)
-#define AT91_PIN_PB4 (0x20 + 4)
-#define AT91_PIN_PB5 (0x20 + 5)
-#define AT91_PIN_PB6 (0x20 + 6)
-#define AT91_PIN_PB7 (0x20 + 7)
-#define AT91_PIN_PB8 (0x20 + 8)
-#define AT91_PIN_PB9 (0x20 + 9)
-#define AT91_PIN_PB10 (0x20 + 10)
-#define AT91_PIN_PB11 (0x20 + 11)
-#define AT91_PIN_PB12 (0x20 + 12)
-#define AT91_PIN_PB13 (0x20 + 13)
-#define AT91_PIN_PB14 (0x20 + 14)
-#define AT91_PIN_PB15 (0x20 + 15)
-#define AT91_PIN_PB16 (0x20 + 16)
-#define AT91_PIN_PB17 (0x20 + 17)
-#define AT91_PIN_PB18 (0x20 + 18)
-#define AT91_PIN_PB19 (0x20 + 19)
-#define AT91_PIN_PB20 (0x20 + 20)
-#define AT91_PIN_PB21 (0x20 + 21)
-#define AT91_PIN_PB22 (0x20 + 22)
-#define AT91_PIN_PB23 (0x20 + 23)
-#define AT91_PIN_PB24 (0x20 + 24)
-#define AT91_PIN_PB25 (0x20 + 25)
-#define AT91_PIN_PB26 (0x20 + 26)
-#define AT91_PIN_PB27 (0x20 + 27)
-#define AT91_PIN_PB28 (0x20 + 28)
-#define AT91_PIN_PB29 (0x20 + 29)
-#define AT91_PIN_PB30 (0x20 + 30)
-#define AT91_PIN_PB31 (0x20 + 31)
-
-#define AT91_PIN_PC0 (0x40 + 0)
-#define AT91_PIN_PC1 (0x40 + 1)
-#define AT91_PIN_PC2 (0x40 + 2)
-#define AT91_PIN_PC3 (0x40 + 3)
-#define AT91_PIN_PC4 (0x40 + 4)
-#define AT91_PIN_PC5 (0x40 + 5)
-#define AT91_PIN_PC6 (0x40 + 6)
-#define AT91_PIN_PC7 (0x40 + 7)
-#define AT91_PIN_PC8 (0x40 + 8)
-#define AT91_PIN_PC9 (0x40 + 9)
-#define AT91_PIN_PC10 (0x40 + 10)
-#define AT91_PIN_PC11 (0x40 + 11)
-#define AT91_PIN_PC12 (0x40 + 12)
-#define AT91_PIN_PC13 (0x40 + 13)
-#define AT91_PIN_PC14 (0x40 + 14)
-#define AT91_PIN_PC15 (0x40 + 15)
-#define AT91_PIN_PC16 (0x40 + 16)
-#define AT91_PIN_PC17 (0x40 + 17)
-#define AT91_PIN_PC18 (0x40 + 18)
-#define AT91_PIN_PC19 (0x40 + 19)
-#define AT91_PIN_PC20 (0x40 + 20)
-#define AT91_PIN_PC21 (0x40 + 21)
-#define AT91_PIN_PC22 (0x40 + 22)
-#define AT91_PIN_PC23 (0x40 + 23)
-#define AT91_PIN_PC24 (0x40 + 24)
-#define AT91_PIN_PC25 (0x40 + 25)
-#define AT91_PIN_PC26 (0x40 + 26)
-#define AT91_PIN_PC27 (0x40 + 27)
-#define AT91_PIN_PC28 (0x40 + 28)
-#define AT91_PIN_PC29 (0x40 + 29)
-#define AT91_PIN_PC30 (0x40 + 30)
-#define AT91_PIN_PC31 (0x40 + 31)
-
-#define AT91_PIN_PD0 (0x60 + 0)
-#define AT91_PIN_PD1 (0x60 + 1)
-#define AT91_PIN_PD2 (0x60 + 2)
-#define AT91_PIN_PD3 (0x60 + 3)
-#define AT91_PIN_PD4 (0x60 + 4)
-#define AT91_PIN_PD5 (0x60 + 5)
-#define AT91_PIN_PD6 (0x60 + 6)
-#define AT91_PIN_PD7 (0x60 + 7)
-#define AT91_PIN_PD8 (0x60 + 8)
-#define AT91_PIN_PD9 (0x60 + 9)
-#define AT91_PIN_PD10 (0x60 + 10)
-#define AT91_PIN_PD11 (0x60 + 11)
-#define AT91_PIN_PD12 (0x60 + 12)
-#define AT91_PIN_PD13 (0x60 + 13)
-#define AT91_PIN_PD14 (0x60 + 14)
-#define AT91_PIN_PD15 (0x60 + 15)
-#define AT91_PIN_PD16 (0x60 + 16)
-#define AT91_PIN_PD17 (0x60 + 17)
-#define AT91_PIN_PD18 (0x60 + 18)
-#define AT91_PIN_PD19 (0x60 + 19)
-#define AT91_PIN_PD20 (0x60 + 20)
-#define AT91_PIN_PD21 (0x60 + 21)
-#define AT91_PIN_PD22 (0x60 + 22)
-#define AT91_PIN_PD23 (0x60 + 23)
-#define AT91_PIN_PD24 (0x60 + 24)
-#define AT91_PIN_PD25 (0x60 + 25)
-#define AT91_PIN_PD26 (0x60 + 26)
-#define AT91_PIN_PD27 (0x60 + 27)
-#define AT91_PIN_PD28 (0x60 + 28)
-#define AT91_PIN_PD29 (0x60 + 29)
-#define AT91_PIN_PD30 (0x60 + 30)
-#define AT91_PIN_PD31 (0x60 + 31)
-
-#define AT91_PIN_PE0 (0x80 + 0)
-#define AT91_PIN_PE1 (0x80 + 1)
-#define AT91_PIN_PE2 (0x80 + 2)
-#define AT91_PIN_PE3 (0x80 + 3)
-#define AT91_PIN_PE4 (0x80 + 4)
-#define AT91_PIN_PE5 (0x80 + 5)
-#define AT91_PIN_PE6 (0x80 + 6)
-#define AT91_PIN_PE7 (0x80 + 7)
-#define AT91_PIN_PE8 (0x80 + 8)
-#define AT91_PIN_PE9 (0x80 + 9)
-#define AT91_PIN_PE10 (0x80 + 10)
-#define AT91_PIN_PE11 (0x80 + 11)
-#define AT91_PIN_PE12 (0x80 + 12)
-#define AT91_PIN_PE13 (0x80 + 13)
-#define AT91_PIN_PE14 (0x80 + 14)
-#define AT91_PIN_PE15 (0x80 + 15)
-#define AT91_PIN_PE16 (0x80 + 16)
-#define AT91_PIN_PE17 (0x80 + 17)
-#define AT91_PIN_PE18 (0x80 + 18)
-#define AT91_PIN_PE19 (0x80 + 19)
-#define AT91_PIN_PE20 (0x80 + 20)
-#define AT91_PIN_PE21 (0x80 + 21)
-#define AT91_PIN_PE22 (0x80 + 22)
-#define AT91_PIN_PE23 (0x80 + 23)
-#define AT91_PIN_PE24 (0x80 + 24)
-#define AT91_PIN_PE25 (0x80 + 25)
-#define AT91_PIN_PE26 (0x80 + 26)
-#define AT91_PIN_PE27 (0x80 + 27)
-#define AT91_PIN_PE28 (0x80 + 28)
-#define AT91_PIN_PE29 (0x80 + 29)
-#define AT91_PIN_PE30 (0x80 + 30)
-#define AT91_PIN_PE31 (0x80 + 31)
-
-#ifndef __ASSEMBLY__
-/* setup setup routines, called from board init or driver probe() */
-extern int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_C_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_D_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_gpio_output(unsigned pin, int value);
-extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on);
-extern int __init_or_module at91_set_debounce(unsigned pin, int is_on, int div);
-extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on);
-extern int __init_or_module at91_set_pulldown(unsigned pin, int is_on);
-extern int __init_or_module at91_disable_schmitt_trig(unsigned pin);
-
-/* callable at any time */
-extern int at91_set_gpio_value(unsigned pin, int value);
-extern int at91_get_gpio_value(unsigned pin);
-
-/* callable only from core power-management code */
-extern void at91_gpio_suspend(void);
-extern void at91_gpio_resume(void);
-
-#ifdef CONFIG_PINCTRL_AT91
-extern void at91_pinctrl_gpio_suspend(void);
-extern void at91_pinctrl_gpio_resume(void);
-#else
-static inline void at91_pinctrl_gpio_suspend(void) {}
-static inline void at91_pinctrl_gpio_resume(void) {}
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index f17aa3150019..56338245653a 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -104,5 +104,20 @@
/* Clocks */
#define AT91_SLOW_CLOCK 32768 /* slow clock */
+/*
+ * FIXME: this is needed to communicate between the pinctrl driver and
+ * the PM implementation in the machine. Possibly part of the PM
+ * implementation should be moved down into the pinctrl driver and get
+ * called as part of the generic suspend/resume path.
+ */
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_PINCTRL_AT91
+extern void at91_pinctrl_gpio_suspend(void);
+extern void at91_pinctrl_gpio_resume(void);
+#else
+static inline void at91_pinctrl_gpio_suspend(void) {}
+static inline void at91_pinctrl_gpio_resume(void) {}
+#endif
+#endif
#endif
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
index 3e22978b5547..77c4d8fd03fd 100644
--- a/arch/arm/mach-at91/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -16,6 +16,7 @@
#include <linux/platform_device.h>
#include "board.h"
+#include "gpio.h"
/* ------------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 8bda1cefdf96..e95554532987 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -32,6 +32,7 @@
#include "at91_aic.h"
#include "generic.h"
#include "pm.h"
+#include "gpio.h"
/*
* Show the reason for the previous system reset.
--
1.8.2.2
On Mon, Apr 14, 2014 at 11:54:38AM +0200, Nicolas Ferre wrote:
> This include file is about to disapear. In addition it is
> useless for this code. So it is time to remove it.
>
> Signed-off-by: Nicolas Ferre <[email protected]>
Acked-by: Mark Brown <[email protected]>
On 14/04/2014 11:54, Nicolas Ferre :
> This include file is about to disapear. In addition it is
> useless for this code. So it is time to remove it.
>
> Signed-off-by: Nicolas Ferre <[email protected]>
> ---
> Hi Mark,
>
> This patch is needed before we integrate the folling one. It will allow us to
> remove the mach/gpio.h header file for AT91 and will be a move forward in the
> single zImage direction.
>
> So, can you have a look and if you agree, we may add both in arm-soc during
> the 3.15-rc phase...
So, after discussion with Arnd, I take this series of two in our
at91-3.16-cleanup branch.
Bye,
>
> Thanks, bye
>
> sound/soc/atmel/sam9g20_wm8731.c | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c
> index 174bd546c08b..bb1149126c54 100644
> --- a/sound/soc/atmel/sam9g20_wm8731.c
> +++ b/sound/soc/atmel/sam9g20_wm8731.c
> @@ -48,7 +48,6 @@
>
> #include <asm/mach-types.h>
> #include <mach/hardware.h>
> -#include <mach/gpio.h>
>
> #include "../codecs/wm8731.h"
> #include "atmel-pcm.h"
>
--
Nicolas Ferre