The mmc-controller.yaml didn't explicitly say disable-wp is
for SD card slot only, but that is what it was designed for
in the first place.
Remove all disable-wp from emmc or sdio controllers.
Signed-off-by: Johan Jonker <[email protected]>
---
arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
index aa256350b..23527daa7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
@@ -125,7 +125,6 @@
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
- disable-wp;
mmc-hs200-1_8v;
non-removable;
status = "okay";
--
2.11.0
On Thu, 19 Dec 2019 13:19:54 +0100, Johan Jonker wrote:
> The mmc-controller.yaml didn't explicitly say disable-wp is
> for SD card slot only, but that is what it was designed for
> in the first place.
> Remove all disable-wp from emmc or sdio controllers.
Applied, thanks!
[1/1] arm64: dts: rockchip: remove disable-wp from rk3308-roc-cc emmc node
commit: 1fab4cf51e48e9525cf70a9604e90dd3dd666a2f
Best regards,
--
Heiko Stuebner <[email protected]>