This series provides MediaTek cqhci implementations as below:
- Add expose MMC_CAP2_CQE* to dt
- Refine msdc timeout api to reduce redundant code
- MediaTek command queue support
- dt-bindings for mt6779
v1 -> v2:
- Add more patch details in commit message
- Separate msdc timeout api refine to individual patch
v2 -> v3:
- Remove CR-Id, Change-Id and Feature in patches
- Add Signed-off-by in patches
Chun-Hung Wu (4):
[1/4] mmc: core: expose MMC_CAP2_CQE* to dt
[2/4] mmc: mediatek: refine msdc timeout api
[3/4] mmc: mediatek: command queue support
[4/4] dt-bindings: mmc: mediatek: Add document for mt6779
Documentation/devicetree/bindings/mmc/mtk-sd.txt | 1 +
drivers/mmc/core/host.c | 8 ++
drivers/mmc/host/mtk-sd.c | 151 +++++++++++++++++++++--
3 files changed, 150 insertions(+), 10 deletions(-)
--
1.9.1
Add compatible node for mt6779 mmc
Signed-off-by: Chun-Hung Wu <[email protected]>
---
Documentation/devicetree/bindings/mmc/mtk-sd.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
index 8a532f4..0c9cf6a 100644
--- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
@@ -12,6 +12,7 @@ Required properties:
"mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
"mediatek,mt8183-mmc": for mmc host ip compatible with mt8183
"mediatek,mt8516-mmc": for mmc host ip compatible with mt8516
+ "mediatek,mt6779-mmc": for mmc host ip compatible with mt6779
"mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
"mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
"mediatek,mt7622-mmc": for MT7622 SoC
--
1.9.1
Support command queue for mt6779 platform.
a. Add msdc_set_busy_timeout() to calculate emmc write timeout
b. Connect mtk msdc driver to cqhci driver through
host->cq_host->ops = &msdc_cmdq_ops;
c. msdc_cmdq_irq() will link up with cqchi_irq(). Besides, it provides
more irq error messages like RSPCRCERR/CMDTO/DATACRCERR/DATTMO.
d. Use the options below to separate support for CQHCI or not, because
some of our platform does not support CQHCI hence no kernel option:
CONFIG_MMC_CQHCI.
#if IS_ENABLED(CONFIG_MMC_CQHCI)
XXX //Support CQHCI
#else
XXX //Not support CQHCI
#endif
Signed-off-by: Chun-Hung Wu <[email protected]>
---
drivers/mmc/host/mtk-sd.c | 119 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 119 insertions(+)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 127b0cf..b132397 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -31,6 +31,8 @@
#include <linux/mmc/sdio.h>
#include <linux/mmc/slot-gpio.h>
+#include "cqhci.h"
+
#define MAX_BD_NUM 1024
/*--------------------------------------------------------------------------*/
@@ -151,6 +153,7 @@
#define MSDC_INT_DMA_BDCSERR (0x1 << 17) /* W1C */
#define MSDC_INT_DMA_GPDCSERR (0x1 << 18) /* W1C */
#define MSDC_INT_DMA_PROTECT (0x1 << 19) /* W1C */
+#define MSDC_INT_CMDQ (0x1 << 28) /* W1C */
/* MSDC_INTEN mask */
#define MSDC_INTEN_MMCIRQ (0x1 << 0) /* RW */
@@ -181,6 +184,7 @@
/* SDC_CFG mask */
#define SDC_CFG_SDIOINTWKUP (0x1 << 0) /* RW */
#define SDC_CFG_INSWKUP (0x1 << 1) /* RW */
+#define SDC_CFG_WRDTOC (0x1fff << 2) /* RW */
#define SDC_CFG_BUSWIDTH (0x3 << 16) /* RW */
#define SDC_CFG_SDIO (0x1 << 19) /* RW */
#define SDC_CFG_SDIOIDE (0x1 << 20) /* RW */
@@ -228,6 +232,7 @@
#define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */
#define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */
+#define MSDC_PB1_BUSY_CHECK_SEL (0x1 << 7) /* RW */
#define MSDC_PATCH_BIT1_STOP_DLY (0xf << 8) /* RW */
#define MSDC_PATCH_BIT2_CFGRESP (0x1 << 15) /* RW */
@@ -431,6 +436,7 @@ struct msdc_host {
struct msdc_save_para save_para; /* used when gate HCLK */
struct msdc_tune_para def_tune_para; /* default tune setting */
struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */
+ struct cqhci_host *cq_host;
};
static const struct mtk_mmc_compatible mt8135_compat = {
@@ -527,6 +533,18 @@ struct msdc_host {
.use_internal_cd = true,
};
+static const struct mtk_mmc_compatible mt6779_compat = {
+ .clk_div_bits = 12,
+ .hs400_tune = false,
+ .pad_tune_reg = MSDC_PAD_TUNE0,
+ .async_fifo = true,
+ .data_tune = true,
+ .busy_check = true,
+ .stop_clk_fix = true,
+ .enhance_rx = true,
+ .support_64g = true,
+};
+
static const struct of_device_id msdc_of_ids[] = {
{ .compatible = "mediatek,mt8135-mmc", .data = &mt8135_compat},
{ .compatible = "mediatek,mt8173-mmc", .data = &mt8173_compat},
@@ -536,6 +554,7 @@ struct msdc_host {
{ .compatible = "mediatek,mt7622-mmc", .data = &mt7622_compat},
{ .compatible = "mediatek,mt8516-mmc", .data = &mt8516_compat},
{ .compatible = "mediatek,mt7620-mmc", .data = &mt7620_compat},
+ { .compatible = "mediatek,mt6779-mmc", .data = &mt6779_compat},
{}
};
MODULE_DEVICE_TABLE(of, msdc_of_ids);
@@ -739,6 +758,15 @@ static void msdc_set_timeout(struct msdc_host *host, u64 ns, u64 clks)
(u32)(timeout > 255 ? 255 : timeout));
}
+static void msdc_set_busy_timeout(struct msdc_host *host, u64 ns, u64 clks)
+{
+ u64 timeout;
+
+ timeout = msdc_timeout_cal(host, ns, clks);
+ sdr_set_field(host->base + SDC_CFG, SDC_CFG_WRDTOC,
+ (u32)(timeout > 8191 ? 8191 : timeout));
+}
+
static void msdc_gate_clock(struct msdc_host *host)
{
clk_disable_unprepare(host->src_clk_cg);
@@ -1425,6 +1453,36 @@ static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)
pm_runtime_put_noidle(host->dev);
}
+#if IS_ENABLED(CONFIG_MMC_CQHCI)
+static irqreturn_t msdc_cmdq_irq(struct msdc_host *host, u32 intsts)
+{
+ int cmd_err = 0, dat_err = 0;
+
+ if (intsts & MSDC_INT_RSPCRCERR) {
+ cmd_err = (unsigned int)-EILSEQ;
+ dev_err(host->dev, "%s: CMD CRC ERR", __func__);
+ } else if (intsts & MSDC_INT_CMDTMO) {
+ cmd_err = (unsigned int)-ETIMEDOUT;
+ dev_err(host->dev, "%s: CMD TIMEOUT ERR", __func__);
+ }
+
+ if (intsts & MSDC_INT_DATCRCERR) {
+ dat_err = (unsigned int)-EILSEQ;
+ dev_err(host->dev, "%s: DATA CRC ERR", __func__);
+ } else if (intsts & MSDC_INT_DATTMO) {
+ dat_err = (unsigned int)-ETIMEDOUT;
+ dev_err(host->dev, "%s: DATA TIMEOUT ERR", __func__);
+ }
+
+ if (cmd_err || dat_err) {
+ dev_err(host->dev, "cmd_err = %d, dat_err =%d, intsts = 0x%x",
+ cmd_err, dat_err, intsts);
+ }
+
+ return cqhci_irq(host->mmc, 0, cmd_err, dat_err);
+}
+#endif
+
static irqreturn_t msdc_irq(int irq, void *dev_id)
{
struct msdc_host *host = (struct msdc_host *) dev_id;
@@ -1461,6 +1519,16 @@ static irqreturn_t msdc_irq(int irq, void *dev_id)
if (!(events & (event_mask & ~MSDC_INT_SDIOIRQ)))
break;
+#if IS_ENABLED(CONFIG_MMC_CQHCI)
+ if ((host->mmc->caps2 & MMC_CAP2_CQE) &&
+ (events & MSDC_INT_CMDQ)) {
+ msdc_cmdq_irq(host, events);
+ /* clear interrupts */
+ writel(events, host->base + MSDC_INT);
+ return IRQ_HANDLED;
+ }
+#endif
+
if (!mrq) {
dev_err(host->dev,
"%s: MRQ=NULL; events=%08X; event_mask=%08X\n",
@@ -2144,6 +2212,36 @@ static int msdc_get_cd(struct mmc_host *mmc)
return !val;
}
+static void msdc_cqe_enable(struct mmc_host *mmc)
+{
+ struct msdc_host *host = mmc_priv(mmc);
+
+ /* enable cmdq irq */
+ writel(MSDC_INT_CMDQ, host->base + MSDC_INTEN);
+ /* enable busy check */
+ sdr_set_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL);
+ /* default write data / busy timeout 20s */
+ msdc_set_busy_timeout(host, 20 * 1000000000ULL, 0);
+ /* default read data timeout 1s */
+ msdc_set_timeout(host, 1000000000ULL, 0);
+}
+
+void msdc_cqe_disable(struct mmc_host *mmc, bool recovery)
+{
+ struct msdc_host *host = mmc_priv(mmc);
+
+ /* disable cmdq irq */
+ sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INT_CMDQ);
+ /* disable busy check */
+ sdr_clr_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL);
+
+ if (recovery) {
+ sdr_set_field(host->base + MSDC_DMA_CTRL,
+ MSDC_DMA_CTRL_STOP, 1);
+ msdc_reset_hw(host);
+ }
+}
+
static const struct mmc_host_ops mt_msdc_ops = {
.post_req = msdc_post_req,
.pre_req = msdc_pre_req,
@@ -2160,6 +2258,11 @@ static int msdc_get_cd(struct mmc_host *mmc)
.hw_reset = msdc_hw_reset,
};
+static const struct cqhci_host_ops msdc_cmdq_ops = {
+ .enable = msdc_cqe_enable,
+ .disable = msdc_cqe_disable,
+};
+
static void msdc_of_property_parse(struct platform_device *pdev,
struct msdc_host *host)
{
@@ -2311,6 +2414,22 @@ static int msdc_drv_probe(struct platform_device *pdev)
host->dma_mask = DMA_BIT_MASK(32);
mmc_dev(mmc)->dma_mask = &host->dma_mask;
+#if IS_ENABLED(CONFIG_MMC_CQHCI)
+ if (mmc->caps2 & MMC_CAP2_CQE) {
+ host->cq_host = devm_kzalloc(host->mmc->parent,
+ sizeof(*host->cq_host),
+ GFP_KERNEL);
+ host->cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
+ host->cq_host->mmio = host->base + 0x800;
+ host->cq_host->ops = &msdc_cmdq_ops;
+ cqhci_init(host->cq_host, mmc, true);
+ mmc->max_segs = 128;
+ /* cqhci 16bit length */
+ /* 0 size, means 65536 so we don't have to -1 here */
+ mmc->max_seg_size = 64 * 1024;
+ }
+#endif
+
host->timeout_clks = 3 * 1048576;
host->dma.gpd = dma_alloc_coherent(&pdev->dev,
2 * sizeof(struct mt_gpdma_desc),
--
1.9.1
Extract msdc timeout api common part to have
better code architecture and avoid redundent
code.
Signed-off-by: Chun-Hung Wu <[email protected]>
---
drivers/mmc/host/mtk-sd.c | 32 ++++++++++++++++++++++----------
1 file changed, 22 insertions(+), 10 deletions(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 189e426..127b0cf 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -698,21 +698,21 @@ static void msdc_unprepare_data(struct msdc_host *host, struct mmc_request *mrq)
}
}
-/* clock control primitives */
-static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
+static u64 msdc_timeout_cal(struct msdc_host *host, u64 ns, u64 clks)
{
- u32 timeout, clk_ns;
+ u64 timeout, clk_ns;
u32 mode = 0;
- host->timeout_ns = ns;
- host->timeout_clks = clks;
if (host->mmc->actual_clock == 0) {
timeout = 0;
} else {
- clk_ns = 1000000000UL / host->mmc->actual_clock;
- timeout = (ns + clk_ns - 1) / clk_ns + clks;
+ clk_ns = 1000000000ULL;
+ do_div(clk_ns, host->mmc->actual_clock);
+ timeout = ns + clk_ns - 1;
+ do_div(timeout, clk_ns);
+ timeout += clks;
/* in 1048576 sclk cycle unit */
- timeout = (timeout + (0x1 << 20) - 1) >> 20;
+ timeout = DIV_ROUND_UP(timeout, (0x1 << 20));
if (host->dev_comp->clk_div_bits == 8)
sdr_get_field(host->base + MSDC_CFG,
MSDC_CFG_CKMOD, &mode);
@@ -722,9 +722,21 @@ static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
/*DDR mode will double the clk cycles for data timeout */
timeout = mode >= 2 ? timeout * 2 : timeout;
timeout = timeout > 1 ? timeout - 1 : 0;
- timeout = timeout > 255 ? 255 : timeout;
}
- sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC, timeout);
+ return timeout;
+}
+
+/* clock control primitives */
+static void msdc_set_timeout(struct msdc_host *host, u64 ns, u64 clks)
+{
+ u64 timeout;
+
+ host->timeout_ns = ns;
+ host->timeout_clks = clks;
+
+ timeout = msdc_timeout_cal(host, ns, clks);
+ sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC,
+ (u32)(timeout > 255 ? 255 : timeout));
}
static void msdc_gate_clock(struct msdc_host *host)
--
1.9.1
Expose MMC_CAP2_CQE and MMC_CAP2_CQE_DCMD
to host->caps2 if
1. "supports-cqe" is defined in dt and
2. "disable-cqe-dcmd" is not defined in dt.
Signed-off-by: Chun-Hung Wu <[email protected]>
---
drivers/mmc/core/host.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 105b7a7..efb0dbe 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -319,6 +319,14 @@ int mmc_of_parse(struct mmc_host *host)
host->caps2 |= MMC_CAP2_NO_SD;
if (device_property_read_bool(dev, "no-mmc"))
host->caps2 |= MMC_CAP2_NO_MMC;
+ if (device_property_read_bool(dev, "supports-cqe"))
+ host->caps2 |= MMC_CAP2_CQE;
+
+ /* Must be after "supports-cqe" check */
+ if (!device_property_read_bool(dev, "disable-cqe-dcmd")) {
+ if (host->caps2 & MMC_CAP2_CQE)
+ host->caps2 |= MMC_CAP2_CQE_DCMD;
+ }
/* Must be after "non-removable" check */
if (device_property_read_u32(dev, "fixed-emmc-driver-type", &drv_type) == 0) {
--
1.9.1
On 17/02/2020 07:56, Chun-Hung Wu wrote:
> Support command queue for mt6779 platform.
> a. Add msdc_set_busy_timeout() to calculate emmc write timeout
> b. Connect mtk msdc driver to cqhci driver through
> host->cq_host->ops = &msdc_cmdq_ops;
> c. msdc_cmdq_irq() will link up with cqchi_irq(). Besides, it provides
> more irq error messages like RSPCRCERR/CMDTO/DATACRCERR/DATTMO.
> d. Use the options below to separate support for CQHCI or not, because
> some of our platform does not support CQHCI hence no kernel option:
> CONFIG_MMC_CQHCI.
> #if IS_ENABLED(CONFIG_MMC_CQHCI)
> XXX //Support CQHCI
> #else
> XXX //Not support CQHCI
> #endif
>
> Signed-off-by: Chun-Hung Wu <[email protected]>
> ---
> drivers/mmc/host/mtk-sd.c | 119 ++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 119 insertions(+)
>
> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> index 127b0cf..b132397 100644
> --- a/drivers/mmc/host/mtk-sd.c
> +++ b/drivers/mmc/host/mtk-sd.c
> @@ -31,6 +31,8 @@
> #include <linux/mmc/sdio.h>
> #include <linux/mmc/slot-gpio.h>
>
> +#include "cqhci.h"
> +
> #define MAX_BD_NUM 1024
>
> /*--------------------------------------------------------------------------*/
> @@ -151,6 +153,7 @@
> #define MSDC_INT_DMA_BDCSERR (0x1 << 17) /* W1C */
> #define MSDC_INT_DMA_GPDCSERR (0x1 << 18) /* W1C */
> #define MSDC_INT_DMA_PROTECT (0x1 << 19) /* W1C */
> +#define MSDC_INT_CMDQ (0x1 << 28) /* W1C */
>
> /* MSDC_INTEN mask */
> #define MSDC_INTEN_MMCIRQ (0x1 << 0) /* RW */
> @@ -181,6 +184,7 @@
> /* SDC_CFG mask */
> #define SDC_CFG_SDIOINTWKUP (0x1 << 0) /* RW */
> #define SDC_CFG_INSWKUP (0x1 << 1) /* RW */
> +#define SDC_CFG_WRDTOC (0x1fff << 2) /* RW */
> #define SDC_CFG_BUSWIDTH (0x3 << 16) /* RW */
> #define SDC_CFG_SDIO (0x1 << 19) /* RW */
> #define SDC_CFG_SDIOIDE (0x1 << 20) /* RW */
> @@ -228,6 +232,7 @@
> #define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */
> #define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */
>
> +#define MSDC_PB1_BUSY_CHECK_SEL (0x1 << 7) /* RW */
> #define MSDC_PATCH_BIT1_STOP_DLY (0xf << 8) /* RW */
>
> #define MSDC_PATCH_BIT2_CFGRESP (0x1 << 15) /* RW */
> @@ -431,6 +436,7 @@ struct msdc_host {
> struct msdc_save_para save_para; /* used when gate HCLK */
> struct msdc_tune_para def_tune_para; /* default tune setting */
> struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */
> + struct cqhci_host *cq_host;
> };
>
> static const struct mtk_mmc_compatible mt8135_compat = {
> @@ -527,6 +533,18 @@ struct msdc_host {
> .use_internal_cd = true,
> };
>
> +static const struct mtk_mmc_compatible mt6779_compat = {
> + .clk_div_bits = 12,
I suppose
.hs400_tune = false,
and with this the driver is basically the same as mt8183. So you should put in
the binding description:
"mediatek,mt6779-mmc" "mediatek,mt8183-mmc": for mmc host ip compatible with mt6779
> + .hs400_tune = false,
> + .pad_tune_reg = MSDC_PAD_TUNE0,
> + .async_fifo = true,
> + .data_tune = true,
> + .busy_check = true,
> + .stop_clk_fix = true,
> + .enhance_rx = true,
> + .support_64g = true,
> +};
> +
> static const struct of_device_id msdc_of_ids[] = {
> { .compatible = "mediatek,mt8135-mmc", .data = &mt8135_compat},
> { .compatible = "mediatek,mt8173-mmc", .data = &mt8173_compat},
> @@ -536,6 +554,7 @@ struct msdc_host {
> { .compatible = "mediatek,mt7622-mmc", .data = &mt7622_compat},
> { .compatible = "mediatek,mt8516-mmc", .data = &mt8516_compat},
> { .compatible = "mediatek,mt7620-mmc", .data = &mt7620_compat},
> + { .compatible = "mediatek,mt6779-mmc", .data = &mt6779_compat},
With the above mentioned, not needed.
The driver will use the fallback compatible mt8183-mmc. If in the future we find
anything special with mt6779-mmc we can still add an entry here.
Regards,
Matthias
> {}
> };
> MODULE_DEVICE_TABLE(of, msdc_of_ids);
> @@ -739,6 +758,15 @@ static void msdc_set_timeout(struct msdc_host *host, u64 ns, u64 clks)
> (u32)(timeout > 255 ? 255 : timeout));
> }
>
> +static void msdc_set_busy_timeout(struct msdc_host *host, u64 ns, u64 clks)
> +{
> + u64 timeout;
> +
> + timeout = msdc_timeout_cal(host, ns, clks);
> + sdr_set_field(host->base + SDC_CFG, SDC_CFG_WRDTOC,
> + (u32)(timeout > 8191 ? 8191 : timeout));
> +}
> +
> static void msdc_gate_clock(struct msdc_host *host)
> {
> clk_disable_unprepare(host->src_clk_cg);
> @@ -1425,6 +1453,36 @@ static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)
> pm_runtime_put_noidle(host->dev);
> }
>
> +#if IS_ENABLED(CONFIG_MMC_CQHCI)
> +static irqreturn_t msdc_cmdq_irq(struct msdc_host *host, u32 intsts)
> +{
> + int cmd_err = 0, dat_err = 0;
> +
> + if (intsts & MSDC_INT_RSPCRCERR) {
> + cmd_err = (unsigned int)-EILSEQ;
> + dev_err(host->dev, "%s: CMD CRC ERR", __func__);
> + } else if (intsts & MSDC_INT_CMDTMO) {
> + cmd_err = (unsigned int)-ETIMEDOUT;
> + dev_err(host->dev, "%s: CMD TIMEOUT ERR", __func__);
> + }
> +
> + if (intsts & MSDC_INT_DATCRCERR) {
> + dat_err = (unsigned int)-EILSEQ;
> + dev_err(host->dev, "%s: DATA CRC ERR", __func__);
> + } else if (intsts & MSDC_INT_DATTMO) {
> + dat_err = (unsigned int)-ETIMEDOUT;
> + dev_err(host->dev, "%s: DATA TIMEOUT ERR", __func__);
> + }
> +
> + if (cmd_err || dat_err) {
> + dev_err(host->dev, "cmd_err = %d, dat_err =%d, intsts = 0x%x",
> + cmd_err, dat_err, intsts);
> + }
> +
> + return cqhci_irq(host->mmc, 0, cmd_err, dat_err);
> +}
> +#endif
> +
> static irqreturn_t msdc_irq(int irq, void *dev_id)
> {
> struct msdc_host *host = (struct msdc_host *) dev_id;
> @@ -1461,6 +1519,16 @@ static irqreturn_t msdc_irq(int irq, void *dev_id)
> if (!(events & (event_mask & ~MSDC_INT_SDIOIRQ)))
> break;
>
> +#if IS_ENABLED(CONFIG_MMC_CQHCI)
> + if ((host->mmc->caps2 & MMC_CAP2_CQE) &&
> + (events & MSDC_INT_CMDQ)) {
> + msdc_cmdq_irq(host, events);
> + /* clear interrupts */
> + writel(events, host->base + MSDC_INT);
> + return IRQ_HANDLED;
> + }
> +#endif
> +
> if (!mrq) {
> dev_err(host->dev,
> "%s: MRQ=NULL; events=%08X; event_mask=%08X\n",
> @@ -2144,6 +2212,36 @@ static int msdc_get_cd(struct mmc_host *mmc)
> return !val;
> }
>
> +static void msdc_cqe_enable(struct mmc_host *mmc)
> +{
> + struct msdc_host *host = mmc_priv(mmc);
> +
> + /* enable cmdq irq */
> + writel(MSDC_INT_CMDQ, host->base + MSDC_INTEN);
> + /* enable busy check */
> + sdr_set_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL);
> + /* default write data / busy timeout 20s */
> + msdc_set_busy_timeout(host, 20 * 1000000000ULL, 0);
> + /* default read data timeout 1s */
> + msdc_set_timeout(host, 1000000000ULL, 0);
> +}
> +
> +void msdc_cqe_disable(struct mmc_host *mmc, bool recovery)
> +{
> + struct msdc_host *host = mmc_priv(mmc);
> +
> + /* disable cmdq irq */
> + sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INT_CMDQ);
> + /* disable busy check */
> + sdr_clr_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL);
> +
> + if (recovery) {
> + sdr_set_field(host->base + MSDC_DMA_CTRL,
> + MSDC_DMA_CTRL_STOP, 1);
> + msdc_reset_hw(host);
> + }
> +}
> +
> static const struct mmc_host_ops mt_msdc_ops = {
> .post_req = msdc_post_req,
> .pre_req = msdc_pre_req,
> @@ -2160,6 +2258,11 @@ static int msdc_get_cd(struct mmc_host *mmc)
> .hw_reset = msdc_hw_reset,
> };
>
> +static const struct cqhci_host_ops msdc_cmdq_ops = {
> + .enable = msdc_cqe_enable,
> + .disable = msdc_cqe_disable,
> +};
> +
> static void msdc_of_property_parse(struct platform_device *pdev,
> struct msdc_host *host)
> {
> @@ -2311,6 +2414,22 @@ static int msdc_drv_probe(struct platform_device *pdev)
> host->dma_mask = DMA_BIT_MASK(32);
> mmc_dev(mmc)->dma_mask = &host->dma_mask;
>
> +#if IS_ENABLED(CONFIG_MMC_CQHCI)
> + if (mmc->caps2 & MMC_CAP2_CQE) {
> + host->cq_host = devm_kzalloc(host->mmc->parent,
> + sizeof(*host->cq_host),
> + GFP_KERNEL);
> + host->cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
> + host->cq_host->mmio = host->base + 0x800;
> + host->cq_host->ops = &msdc_cmdq_ops;
> + cqhci_init(host->cq_host, mmc, true);
> + mmc->max_segs = 128;
> + /* cqhci 16bit length */
> + /* 0 size, means 65536 so we don't have to -1 here */
> + mmc->max_seg_size = 64 * 1024;
> + }
> +#endif
> +
> host->timeout_clks = 3 * 1048576;
> host->dma.gpd = dma_alloc_coherent(&pdev->dev,
> 2 * sizeof(struct mt_gpdma_desc),
>
On Mon, 17 Feb 2020 14:56:04 +0800, Chun-Hung Wu wrote:
> Add compatible node for mt6779 mmc
>
> Signed-off-by: Chun-Hung Wu <[email protected]>
> ---
> Documentation/devicetree/bindings/mmc/mtk-sd.txt | 1 +
> 1 file changed, 1 insertion(+)
>
Acked-by: Rob Herring <[email protected]>
On 19/02/2020 04:02, Rob Herring wrote:
> On Mon, 17 Feb 2020 14:56:04 +0800, Chun-Hung Wu wrote:
>> Add compatible node for mt6779 mmc
>>
>> Signed-off-by: Chun-Hung Wu <[email protected]>
>> ---
>> Documentation/devicetree/bindings/mmc/mtk-sd.txt | 1 +
>> 1 file changed, 1 insertion(+)
>>
>
> Acked-by: Rob Herring <[email protected]>
>
With the commit from patch 3/4 the compatible should be:
"mediatek,mt6779-mmc", "mediatek,mt8183-mmc": for mmc host ip compatible with mt6779
Regards,
Matthias
On Mon, 17 Feb 2020 at 07:56, Chun-Hung Wu <[email protected]> wrote:
>
> Expose MMC_CAP2_CQE and MMC_CAP2_CQE_DCMD
> to host->caps2 if
> 1. "supports-cqe" is defined in dt and
> 2. "disable-cqe-dcmd" is not defined in dt.
Both of these DT properties are defined as common mmc DT properties,
so the above isn't really correct. Please clarify this.
Moreover, I suggest to update commit message header into "mmc: core:
Extend mmc_of_parse() to parse CQE bindings", as I think it better
describes the change.
>
> Signed-off-by: Chun-Hung Wu <[email protected]>
> ---
> drivers/mmc/core/host.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
> index 105b7a7..efb0dbe 100644
> --- a/drivers/mmc/core/host.c
> +++ b/drivers/mmc/core/host.c
> @@ -319,6 +319,14 @@ int mmc_of_parse(struct mmc_host *host)
> host->caps2 |= MMC_CAP2_NO_SD;
> if (device_property_read_bool(dev, "no-mmc"))
> host->caps2 |= MMC_CAP2_NO_MMC;
> + if (device_property_read_bool(dev, "supports-cqe"))
> + host->caps2 |= MMC_CAP2_CQE;
> +
> + /* Must be after "supports-cqe" check */
> + if (!device_property_read_bool(dev, "disable-cqe-dcmd")) {
> + if (host->caps2 & MMC_CAP2_CQE)
Does it really doesn't matter if we set this cap, even if MMC_CAP2_CQE
isn't set? You can probably skip the check above.
> + host->caps2 |= MMC_CAP2_CQE_DCMD;
> + }
>
> /* Must be after "non-removable" check */
> if (device_property_read_u32(dev, "fixed-emmc-driver-type", &drv_type) == 0) {
> --
> 1.9.1
Kind regards
Uffe
On Wed, 2020-03-04 at 14:04 +0100, Ulf Hansson wrote:
> On Mon, 17 Feb 2020 at 07:56, Chun-Hung Wu <[email protected]> wrote:
> >
> > Expose MMC_CAP2_CQE and MMC_CAP2_CQE_DCMD
> > to host->caps2 if
> > 1. "supports-cqe" is defined in dt and
> > 2. "disable-cqe-dcmd" is not defined in dt.
>
> Both of these DT properties are defined as common mmc DT properties,
> so the above isn't really correct. Please clarify this.
Yes, the properties is common. But I think the "supports-cqe" or
"disable-cqe-dcmd" is defined in vendor's mmc dt, not common mmc dt?
Don't know what's wrong with the above description, any suggestion?
>
> Moreover, I suggest to update commit message header into "mmc: core:
> Extend mmc_of_parse() to parse CQE bindings", as I think it better
> describes the change.
Thanks, I think the commit message you provide is better, will change it
in v4.
>
> >
> > Signed-off-by: Chun-Hung Wu <[email protected]>
> > ---
> > drivers/mmc/core/host.c | 8 ++++++++
> > 1 file changed, 8 insertions(+)
> >
> > diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
> > index 105b7a7..efb0dbe 100644
> > --- a/drivers/mmc/core/host.c
> > +++ b/drivers/mmc/core/host.c
> > @@ -319,6 +319,14 @@ int mmc_of_parse(struct mmc_host *host)
> > host->caps2 |= MMC_CAP2_NO_SD;
> > if (device_property_read_bool(dev, "no-mmc"))
> > host->caps2 |= MMC_CAP2_NO_MMC;
> > + if (device_property_read_bool(dev, "supports-cqe"))
> > + host->caps2 |= MMC_CAP2_CQE;
> > +
> > + /* Must be after "supports-cqe" check */
> > + if (!device_property_read_bool(dev, "disable-cqe-dcmd")) {
> > + if (host->caps2 & MMC_CAP2_CQE)
>
> Does it really doesn't matter if we set this cap, even if MMC_CAP2_CQE
> isn't set? You can probably skip the check above.
Will remove MMC_CAP2_CQE check here.
>
> > + host->caps2 |= MMC_CAP2_CQE_DCMD;
> > + }
> >
> > /* Must be after "non-removable" check */
> > if (device_property_read_u32(dev, "fixed-emmc-driver-type", &drv_type) == 0) {
> > --
> > 1.9.1
>
> Kind regards
> Uffe
On Thu, 2020-02-20 at 23:06 +0100, Matthias Brugger wrote:
>
> On 19/02/2020 04:02, Rob Herring wrote:
> > On Mon, 17 Feb 2020 14:56:04 +0800, Chun-Hung Wu wrote:
> >> Add compatible node for mt6779 mmc
> >>
> >> Signed-off-by: Chun-Hung Wu <[email protected]>
> >> ---
> >> Documentation/devicetree/bindings/mmc/mtk-sd.txt | 1 +
> >> 1 file changed, 1 insertion(+)
> >>
> >
> > Acked-by: Rob Herring <[email protected]>
> >
>
> With the commit from patch 3/4 the compatible should be:
> "mediatek,mt6779-mmc", "mediatek,mt8183-mmc": for mmc host ip compatible with mt6779
As I know mt8183 is mt6771 platform not mt6779.
mt6771 does not support CQHCI.
>
> Regards,
> Matthias