2016-12-27 13:59:34

by Ramiro Oliveira

[permalink] [raw]
Subject: [PATCH v7 0/2] Add support for Omnivision OV5647

Hello,

This patch adds support for the Omnivision OV5647 sensor.

At the moment it only supports 640x480 in Raw 8.

This is the seventh version of the OV5647 camera driver patchset.

v7:
- Remove "0x" and leading 0 from DT documentation examples

v6:
- Add example to DT documentation
- Remove data-lanes and clock-lane property from DT
- Add external clock property to DT
- Order includes
- Remove unused variables and functions
- Add external clock handling
- Add power on counter
- Change from g/s_parm to g/s_frame_interval

v5:
- Refactor code
- Change comments
- Add missing error handling in some functions

v4:
- Add correct license
- Revert debugging info to generic infrastructure
- Turn defines into enums
- Correct code style issues
- Remove unused defines
- Make sure all errors where being handled
- Rename some functions to make code more readable
- Add some debugging info

v3:
- No changes. Re-submitted due to lack of responses

v2:
- Corrections in DT documentation

Ramiro Oliveira (2):
Add OV5647 device tree documentation
Add support for OV5647 sensor.

.../devicetree/bindings/media/i2c/ov5647.txt | 35 +
MAINTAINERS | 7 +
drivers/media/i2c/Kconfig | 12 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/ov5647.c | 718 +++++++++++++++++++++
5 files changed, 773 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ov5647.txt
create mode 100644 drivers/media/i2c/ov5647.c

--
2.11.0



2016-12-27 13:59:49

by Ramiro Oliveira

[permalink] [raw]
Subject: [PATCH v7 1/2] Add OV5647 device tree documentation

Create device tree bindings documentation.

Signed-off-by: Ramiro Oliveira <[email protected]>
---
.../devicetree/bindings/media/i2c/ov5647.txt | 35 ++++++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ov5647.txt

diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.txt b/Documentation/devicetree/bindings/media/i2c/ov5647.txt
new file mode 100644
index 000000000000..57fd40036c26
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov5647.txt
@@ -0,0 +1,35 @@
+Omnivision OV5647 raw image sensor
+---------------------------------
+
+OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces
+and CCI (I2C compatible) control bus.
+
+Required properties:
+
+- compatible : "ovti,ov5647".
+- reg : I2C slave address of the sensor.
+- clocks : Reference to the xclk clock.
+- clock-names : Should be "xclk".
+- clock-frequency : Frequency of the xclk clock.
+
+The common video interfaces bindings (see video-interfaces.txt) should be
+used to specify link to the image data receiver. The OV5647 device
+node should contain one 'port' child node with an 'endpoint' subnode.
+
+Example:
+
+ i2c@2000 {
+ ...
+ ov: camera@36 {
+ compatible = "ovti,ov5647";
+ reg = <0x36>;
+ clocks = <&camera_clk>;
+ clock-names = "xclk";
+ clock-frequency = <30000000>;
+ port {
+ camera_1: endpoint {
+ remote-endpoint = <&csi1_ep1>;
+ };
+ };
+ };
+ };
--
2.11.0


2016-12-27 14:00:02

by Ramiro Oliveira

[permalink] [raw]
Subject: [PATCH v7 2/2] Add support for OV5647 sensor.

Modes supported:
- 640x480 RAW 8

Signed-off-by: Ramiro Oliveira <[email protected]>
---
MAINTAINERS | 7 +
drivers/media/i2c/Kconfig | 12 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/ov5647.c | 718 +++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 738 insertions(+)
create mode 100644 drivers/media/i2c/ov5647.c

diff --git a/MAINTAINERS b/MAINTAINERS
index cfff2c9e3d94..346bd8d55703 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9095,6 +9095,13 @@ M: Harald Welte <[email protected]>
S: Maintained
F: drivers/char/pcmcia/cm4040_cs.*

+OMNIVISION OV5647 SENSOR DRIVER
+M: Ramiro Oliveira <[email protected]>
+L: [email protected]
+T: git git://linuxtv.org/media_tree.git
+S: Maintained
+F: drivers/media/i2c/ov5647.c
+
OMNIVISION OV7670 SENSOR DRIVER
M: Jonathan Corbet <[email protected]>
L: [email protected]
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index b979ea148251..155878b25566 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -531,6 +531,18 @@ config VIDEO_OV2659
To compile this driver as a module, choose M here: the
module will be called ov2659.

+config VIDEO_OV5647
+ tristate "OmniVision OV5647 sensor support"
+ depends on OF
+ depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on MEDIA_CAMERA_SUPPORT
+ ---help---
+ This is a Video4Linux2 sensor-level driver for the OmniVision
+ OV5647 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov5647.
+
config VIDEO_OV7640
tristate "OmniVision OV7640 sensor support"
depends on I2C && VIDEO_V4L2
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index 92773b2e6225..0d9014c7ab43 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -82,3 +82,4 @@ obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o
obj-$(CONFIG_VIDEO_ML86V7667) += ml86v7667.o
obj-$(CONFIG_VIDEO_OV2659) += ov2659.o
obj-$(CONFIG_VIDEO_TC358743) += tc358743.o
+obj-$(CONFIG_VIDEO_OV5647) += ov5647.o
diff --git a/drivers/media/i2c/ov5647.c b/drivers/media/i2c/ov5647.c
new file mode 100644
index 000000000000..c2828650d3a3
--- /dev/null
+++ b/drivers/media/i2c/ov5647.c
@@ -0,0 +1,718 @@
+/*
+ * A V4L2 driver for OmniVision OV5647 cameras.
+ *
+ * Based on Samsung S5K6AAFX SXGA 1/6" 1.3M CMOS Image Sensor driver
+ * Copyright (C) 2011 Sylwester Nawrocki <[email protected]>
+ *
+ * Based on Omnivision OV7670 Camera Driver
+ * Copyright (C) 2006-7 Jonathan Corbet <[email protected]>
+ *
+ * Copyright (C) 2016, Synopsys, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed .as is. WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-image-sizes.h>
+#include <media/v4l2-mediabus.h>
+#include <media/v4l2-of.h>
+
+#define SENSOR_NAME "ov5647"
+
+#define OV5647_SW_RESET 0x1003
+#define OV5647_REG_CHIPID_H 0x300A
+#define OV5647_REG_CHIPID_L 0x300B
+
+#define REG_TERM 0xfffe
+#define VAL_TERM 0xfe
+#define REG_DLY 0xffff
+
+#define OV5647_ROW_START 0x01
+#define OV5647_ROW_START_MIN 0
+#define OV5647_ROW_START_MAX 2004
+#define OV5647_ROW_START_DEF 54
+
+#define OV5647_COLUMN_START 0x02
+#define OV5647_COLUMN_START_MIN 0
+#define OV5647_COLUMN_START_MAX 2750
+#define OV5647_COLUMN_START_DEF 16
+
+#define OV5647_WINDOW_HEIGHT 0x03
+#define OV5647_WINDOW_HEIGHT_MIN 2
+#define OV5647_WINDOW_HEIGHT_MAX 2006
+#define OV5647_WINDOW_HEIGHT_DEF 1944
+
+#define OV5647_WINDOW_WIDTH 0x04
+#define OV5647_WINDOW_WIDTH_MIN 2
+#define OV5647_WINDOW_WIDTH_MAX 2752
+#define OV5647_WINDOW_WIDTH_DEF 2592
+
+struct regval_list {
+ u16 addr;
+ u8 data;
+};
+
+struct cfg_array {
+ struct regval_list *regs;
+ int size;
+};
+
+struct ov5647 {
+ struct device *dev;
+ struct v4l2_subdev sd;
+ struct media_pad pad;
+ struct mutex lock;
+ struct v4l2_mbus_framefmt format;
+ unsigned int width;
+ unsigned int height;
+ int power_count;
+ struct clk *xclk;
+ /* External clock frequency currently supported is 30MHz */
+ u32 xclk_freq;
+};
+
+static inline struct ov5647 *to_state(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct ov5647, sd);
+}
+
+static struct regval_list sensor_oe_disable_regs[] = {
+ {0x3000, 0x00},
+ {0x3001, 0x00},
+ {0x3002, 0x00},
+};
+
+static struct regval_list sensor_oe_enable_regs[] = {
+ {0x3000, 0x0f},
+ {0x3001, 0xff},
+ {0x3002, 0xe4},
+};
+
+static struct regval_list ov5647_640x480[] = {
+ {0x0100, 0x00},
+ {0x0103, 0x01},
+ {0x3034, 0x08},
+ {0x3035, 0x21},
+ {0x3036, 0x46},
+ {0x303c, 0x11},
+ {0x3106, 0xf5},
+ {0x3821, 0x07},
+ {0x3820, 0x41},
+ {0x3827, 0xec},
+ {0x370c, 0x0f},
+ {0x3612, 0x59},
+ {0x3618, 0x00},
+ {0x5000, 0x06},
+ {0x5001, 0x01},
+ {0x5002, 0x41},
+ {0x5003, 0x08},
+ {0x5a00, 0x08},
+ {0x3000, 0x00},
+ {0x3001, 0x00},
+ {0x3002, 0x00},
+ {0x3016, 0x08},
+ {0x3017, 0xe0},
+ {0x3018, 0x44},
+ {0x301c, 0xf8},
+ {0x301d, 0xf0},
+ {0x3a18, 0x00},
+ {0x3a19, 0xf8},
+ {0x3c01, 0x80},
+ {0x3b07, 0x0c},
+ {0x380c, 0x07},
+ {0x380d, 0x68},
+ {0x380e, 0x03},
+ {0x380f, 0xd8},
+ {0x3814, 0x31},
+ {0x3815, 0x31},
+ {0x3708, 0x64},
+ {0x3709, 0x52},
+ {0x3808, 0x02},
+ {0x3809, 0x80},
+ {0x380a, 0x01},
+ {0x380b, 0xE0},
+ {0x3801, 0x00},
+ {0x3802, 0x00},
+ {0x3803, 0x00},
+ {0x3804, 0x0a},
+ {0x3805, 0x3f},
+ {0x3806, 0x07},
+ {0x3807, 0xa1},
+ {0x3811, 0x08},
+ {0x3813, 0x02},
+ {0x3630, 0x2e},
+ {0x3632, 0xe2},
+ {0x3633, 0x23},
+ {0x3634, 0x44},
+ {0x3636, 0x06},
+ {0x3620, 0x64},
+ {0x3621, 0xe0},
+ {0x3600, 0x37},
+ {0x3704, 0xa0},
+ {0x3703, 0x5a},
+ {0x3715, 0x78},
+ {0x3717, 0x01},
+ {0x3731, 0x02},
+ {0x370b, 0x60},
+ {0x3705, 0x1a},
+ {0x3f05, 0x02},
+ {0x3f06, 0x10},
+ {0x3f01, 0x0a},
+ {0x3a08, 0x01},
+ {0x3a09, 0x27},
+ {0x3a0a, 0x00},
+ {0x3a0b, 0xf6},
+ {0x3a0d, 0x04},
+ {0x3a0e, 0x03},
+ {0x3a0f, 0x58},
+ {0x3a10, 0x50},
+ {0x3a1b, 0x58},
+ {0x3a1e, 0x50},
+ {0x3a11, 0x60},
+ {0x3a1f, 0x28},
+ {0x4001, 0x02},
+ {0x4004, 0x02},
+ {0x4000, 0x09},
+ {0x4837, 0x24},
+ {0x4050, 0x6e},
+ {0x4051, 0x8f},
+ {0x0100, 0x01},
+};
+
+/**
+ * @short I2C Write operation
+ * @param[in] i2c_client I2C client
+ * @param[in] reg register address
+ * @param[in] val value to write
+ * @return Error code
+ */
+static int ov5647_write(struct v4l2_subdev *sd, u16 reg, u8 val)
+{
+ int ret;
+ unsigned char data[3] = { reg >> 8, reg & 0xff, val};
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ ret = i2c_master_send(client, data, 3);
+ if (ret != 3) {
+ dev_dbg(&client->dev, "%s: i2c write error, reg: %x\n",
+ __func__, reg);
+ return ret < 0 ? ret : -EIO;
+ }
+ return 0;
+}
+
+/**
+ * @short I2C Read operation
+ * @param[in] i2c_client I2C client
+ * @param[in] reg register address
+ * @param[out] val value read
+ * @return Error code
+ */
+static int ov5647_read(struct v4l2_subdev *sd, u16 reg, u8 *val)
+{
+ int ret;
+ unsigned char data_w[2] = { reg >> 8, reg & 0xff };
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+
+ ret = i2c_master_send(client, data_w, 2);
+
+ if (ret < 2) {
+ dev_dbg(&client->dev, "%s: i2c read error, reg: %x\n",
+ __func__, reg);
+ return ret < 0 ? ret : -EIO;
+ }
+
+
+ ret = i2c_master_recv(client, val, 1);
+
+ if (ret < 1) {
+ dev_dbg(&client->dev, "%s: i2c read error, reg: %x\n",
+ __func__, reg);
+ return ret < 0 ? ret : -EIO;
+ }
+ return 0;
+}
+
+static int ov5647_write_array(struct v4l2_subdev *sd,
+ struct regval_list *regs, int array_size)
+{
+ int i = 0;
+ int ret = 0;
+
+ if (!regs)
+ return -EINVAL;
+
+ while (i < array_size) {
+ ret = ov5647_write(sd, regs->addr, regs->data);
+ if (ret < 0)
+ return ret;
+ i++;
+ regs++;
+ }
+ return 0;
+}
+
+static void ov5647_set_virtual_channel(struct v4l2_subdev *sd, int channel)
+{
+ u8 channel_id;
+
+ ov5647_read(sd, 0x4814, &channel_id);
+ channel_id &= ~(3 << 6);
+ ov5647_write(sd, 0x4814, channel_id | (channel << 6));
+}
+
+void ov5647_stream_on(struct v4l2_subdev *sd)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ ov5647_write(sd, 0x4202, 0x00);
+ dev_dbg(&client->dev, "Stream on");
+ ov5647_write(sd, 0x300D, 0x00);
+}
+
+void ov5647_stream_off(struct v4l2_subdev *sd)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ ov5647_write(sd, 0x4202, 0x0f);
+ dev_dbg(&client->dev, "Stream off");
+ ov5647_write(sd, 0x300D, 0x01);
+}
+
+/**
+ * @short Set SW standby
+ * @param[in] sd v4l2 sd
+ * @param[in] stanby standby mode status (on or off)
+ * @return Error code
+ */
+static int set_sw_standby(struct v4l2_subdev *sd, bool standby)
+{
+ int ret;
+ unsigned char rdval;
+
+ ret = ov5647_read(sd, 0x0100, &rdval);
+ if (ret != 0)
+ return ret;
+
+ if (standby)
+ rdval &= 0xfe;
+ else
+ rdval |= 0x01;
+
+ ret = ov5647_write(sd, 0x0100, rdval);
+
+ return ret;
+}
+
+/**
+ * @short Initialize sensor
+ * @param[in] sd v4l2 subdev
+ * @param[in] val not used
+ * @return Error code
+ */
+static int __sensor_init(struct v4l2_subdev *sd)
+{
+ int ret;
+ u8 resetval;
+ u8 rdval;
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ dev_dbg(&client->dev, "sensor init\n");
+
+ ret = ov5647_read(sd, 0x0100, &rdval);
+ if (ret != 0)
+ return ret;
+
+ ov5647_write(sd, 0x4800, 0x25);
+ ov5647_stream_off(sd);
+
+ ret = ov5647_write_array(sd, ov5647_640x480,
+ ARRAY_SIZE(ov5647_640x480));
+ if (ret < 0) {
+ dev_err(&client->dev, "write sensor_default_regs error\n");
+ return ret;
+ }
+
+ ov5647_set_virtual_channel(sd, 0);
+
+ ov5647_read(sd, 0x0100, &resetval);
+ if (!(resetval & 0x01)) {
+ dev_err(&client->dev, "Device was in SW standby");
+ ov5647_write(sd, 0x0100, 0x01);
+ }
+
+ ov5647_write(sd, 0x4800, 0x04);
+ ov5647_stream_on(sd);
+
+ return 0;
+}
+
+/**
+ * @short Control sensor power state
+ * @param[in] sd v4l2 subdev
+ * @param[in] on Sensor power
+ * @return Error code
+ */
+static int sensor_power(struct v4l2_subdev *sd, int on)
+{
+ int ret;
+ struct ov5647 *ov5647 = to_state(sd);
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ ret = 0;
+ mutex_lock(&ov5647->lock);
+
+ if (on && !ov5647->power_count) {
+ dev_dbg(&client->dev, "OV5647 power on\n");
+
+ clk_set_rate(ov5647->xclk, ov5647->xclk_freq);
+
+ ret = clk_prepare_enable(ov5647->xclk);
+ if (ret < 0) {
+ dev_err(ov5647->dev, "clk prepare enable failed\n");
+ goto out;
+ }
+
+ ret = ov5647_write_array(sd, sensor_oe_enable_regs,
+ ARRAY_SIZE(sensor_oe_enable_regs));
+ if (ret < 0) {
+ clk_disable_unprepare(ov5647->xclk);
+ dev_err(&client->dev,
+ "write sensor_oe_enable_regs error\n");
+ goto out;
+ }
+
+ ret = __sensor_init(sd);
+ if (ret < 0) {
+ clk_disable_unprepare(ov5647->xclk);
+ dev_err(&client->dev,
+ "Camera not available, check Power\n");
+ goto out;
+ }
+ } else if (!on && ov5647->power_count == 1) {
+ dev_dbg(&client->dev, "OV5647 power off\n");
+
+ dev_dbg(&client->dev, "disable oe\n");
+ ret = ov5647_write_array(sd, sensor_oe_disable_regs,
+ ARRAY_SIZE(sensor_oe_disable_regs));
+
+ if (ret < 0)
+ dev_dbg(&client->dev, "disable oe failed\n");
+
+ ret = set_sw_standby(sd, true);
+
+ if (ret < 0)
+ dev_dbg(&client->dev, "soft stby failed\n");
+
+ clk_disable_unprepare(ov5647->xclk);
+ }
+
+ /* Update the power count. */
+ ov5647->power_count += on ? 1 : -1;
+ WARN_ON(ov5647->power_count < 0);
+
+out:
+ mutex_unlock(&ov5647->lock);
+
+ return ret;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+/**
+ * @short Get register value
+ * @param[in] sd v4l2 subdev
+ * @param[in] reg register struct
+ * @return Error code
+ */
+static int sensor_get_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ unsigned char val = 0;
+ int ret;
+
+ ret = ov5647_read(sd, reg->reg & 0xff, &val);
+ if (ret != 0)
+ return ret;
+
+ reg->val = val;
+ reg->size = 1;
+
+ return ret;
+}
+
+/**
+ * @short Set register value
+ * @param[in] sd v4l2 subdev
+ * @param[in] reg register struct
+ * @return Error code
+ */
+static int sensor_set_register(struct v4l2_subdev *sd,
+ const struct v4l2_dbg_register *reg)
+{
+ return ov5647_write(sd, reg->reg & 0xff, reg->val & 0xff);
+}
+#endif
+
+/**
+ * @short Subdev core operations registration
+ */
+static const struct v4l2_subdev_core_ops sensor_core_ops = {
+ .s_power = sensor_power,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .g_register = sensor_get_register,
+ .s_register = sensor_set_register,
+#endif
+};
+
+static int enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ if (code->index > 0)
+ return -EINVAL;
+
+ code->code = MEDIA_BUS_FMT_SBGGR8_1X8;
+
+ return 0;
+}
+
+static const struct v4l2_subdev_pad_ops subdev_pad_ops = {
+ .enum_mbus_code = enum_mbus_code,
+};
+
+
+/**
+ * @short Subdev operations registration
+ *
+ */
+static const struct v4l2_subdev_ops subdev_ops = {
+ .core = &sensor_core_ops,
+ .pad = &subdev_pad_ops,
+};
+
+/**
+ * @short Detect camera version and model
+ * @param[in] sd v4l2 subdev
+ * @return Error code
+ */
+static int ov5647_detect(struct v4l2_subdev *sd)
+{
+ unsigned char v;
+ int ret;
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ ret = ov5647_write(sd, OV5647_SW_RESET, 0x01);
+ if (ret < 0)
+ return ret;
+ ret = ov5647_read(sd, OV5647_REG_CHIPID_H, &v);
+ if (ret < 0)
+ return ret;
+ if (v != 0x56) {
+ dev_err(&client->dev, "Wrong model version detected");
+ return -ENODEV;
+ }
+ ret = ov5647_read(sd, OV5647_REG_CHIPID_L, &v);
+ if (ret < 0)
+ return ret;
+ if (v != 0x47) {
+ dev_err(&client->dev, "Wrong model version detected");
+ return -ENODEV;
+ }
+
+ ret = ov5647_write(sd, OV5647_SW_RESET, 0x00);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+/**
+ * @short Detect if camera is registered
+ * @param[in] sd v4l2 subdev
+ * @return Error code
+ */
+static int ov5647_registered(struct v4l2_subdev *sd)
+{
+ return 0;
+}
+
+/**
+ * @short Open device
+ * @param[in] sd v4l2 subdev
+ * @param[in] fh v4l2 file handler
+ * @return Error code
+ */
+static int ov5647_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ struct v4l2_mbus_framefmt *format =
+ v4l2_subdev_get_try_format(sd, fh->pad, 0);
+ struct v4l2_rect *crop =
+ v4l2_subdev_get_try_crop(sd, fh->pad, 0);
+
+ crop->left = OV5647_COLUMN_START_DEF;
+ crop->top = OV5647_ROW_START_DEF;
+ crop->width = OV5647_WINDOW_WIDTH_DEF;
+ crop->height = OV5647_WINDOW_HEIGHT_DEF;
+
+ format->code = MEDIA_BUS_FMT_SBGGR8_1X8;
+
+ format->width = OV5647_WINDOW_WIDTH_DEF;
+ format->height = OV5647_WINDOW_HEIGHT_DEF;
+ format->field = V4L2_FIELD_NONE;
+ format->colorspace = V4L2_COLORSPACE_SRGB;
+
+ return sensor_power(sd, true);
+}
+
+/**
+ * @short Open device
+ * @param[in] sd v4l2 subdev
+ * @param[in] fh v4l2 file handler
+ * @return Error code
+ */
+static int ov5647_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ return sensor_power(sd, false);
+}
+
+/**
+ * @short Subdev internal operations registration
+ *
+ */
+static const struct v4l2_subdev_internal_ops ov5647_subdev_internal_ops = {
+ .registered = ov5647_registered,
+ .open = ov5647_open,
+ .close = ov5647_close,
+};
+
+/**
+ * @short Initialization routine - Entry point of the driver
+ * @param[in] client pointer to the i2c client structure
+ * @param[in] id pointer to the i2c device id structure
+ * @return 0 on success and a negative number on failure
+ */
+static int ov5647_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct ov5647 *sensor;
+ int ret;
+ struct v4l2_subdev *sd;
+
+ dev_info(&client->dev, "Installing OmniVision OV5647 camera driver\n");
+
+ sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
+ if (sensor == NULL)
+ return -ENOMEM;
+
+ /* get system clock (xclk) */
+ sensor->xclk = devm_clk_get(dev, "xclk");
+ if (IS_ERR(sensor->xclk)) {
+ dev_err(dev, "could not get xclk");
+ return PTR_ERR(sensor->xclk);
+ }
+
+ ret = of_property_read_u32(dev->of_node, "clock-frequency",
+ &sensor->xclk_freq);
+ if (ret) {
+ dev_err(dev, "could not get xclk frequency\n");
+ return ret;
+ }
+
+ mutex_init(&sensor->lock);
+ sensor->dev = dev;
+
+ sd = &sensor->sd;
+ v4l2_i2c_subdev_init(sd, client, &subdev_ops);
+ sensor->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+ sensor->pad.flags = MEDIA_PAD_FL_SOURCE;
+ sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
+ ret = media_entity_pads_init(&sd->entity, 1, &sensor->pad);
+ if (ret < 0)
+ goto mutex_remove;
+
+ ret = ov5647_detect(sd);
+ if (ret < 0)
+ goto error;
+
+ ret = v4l2_async_register_subdev(sd);
+ if (ret < 0)
+ goto error;
+
+ return 0;
+error:
+ media_entity_cleanup(&sd->entity);
+mutex_remove:
+ mutex_destroy(&sensor->lock);
+ return ret;
+}
+
+/**
+ * @short Exit routine - Exit point of the driver
+ * @param[in] client pointer to the i2c client structure
+ * @return 0 on success and a negative number on failure
+ */
+static int ov5647_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct ov5647 *ov5647 = to_state(sd);
+
+ v4l2_async_unregister_subdev(&ov5647->sd);
+ media_entity_cleanup(&ov5647->sd.entity);
+ v4l2_device_unregister_subdev(sd);
+ mutex_destroy(&ov5647->lock);
+
+ return 0;
+}
+
+static const struct i2c_device_id ov5647_id[] = {
+ { "ov5647", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ov5647_id);
+
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id ov5647_of_match[] = {
+ { .compatible = "ovti,ov5647" },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, ov5647_of_match);
+#endif
+
+/**
+ * @short i2c driver structure
+ */
+static struct i2c_driver ov5647_driver = {
+ .driver = {
+ .of_match_table = of_match_ptr(ov5647_of_match),
+ .owner = THIS_MODULE,
+ .name = "ov5647",
+ },
+ .probe = ov5647_probe,
+ .remove = ov5647_remove,
+ .id_table = ov5647_id,
+};
+
+module_i2c_driver(ov5647_driver);
+
+MODULE_AUTHOR("Ramiro Oliveira <[email protected]>");
+MODULE_DESCRIPTION("A low-level driver for OmniVision ov5647 sensors");
+MODULE_LICENSE("GPL v2");
--
2.11.0