v1 and v2 of this series were aiming at removing 40x entirely,
but it led to protests.
v3 is trying to start modernising powerpc 40x:
- Rework TLB miss handlers to not use PTE_ATOMIC_UPDATES and _PAGE_HWWRITE
- Remove old versions of 40x processors, namely 403 and 405GP and associated
errata.
- Last two patches are trivial changes in TLB miss handlers to reduce number
of scratch registers.
I would have liked to test it with QEMU, but I get the following error when
trying to start QEMU for machine ref405ep.
qemu-system-ppc: Could not load PowerPC BIOS 'ppc405_rom.bin'
Can someone help with that ?
Christophe Leroy (12):
powerpc/40x: Rework 40x PTE access and TLB miss
powerpc/pgtable: Drop PTE_ATOMIC_UPDATES
powerpc/40x: Remove support for IBM 403GCX
powerpc/40x: Remove STB03xxx
powerpc/40x: Remove WALNUT
powerpc/40x: Remove EP405
powerpc/40x: Remove support for ISS Simulator
powerpc/40x: Remove support for IBM 405GP
powerpc/40x: Remove IBM405 Erratum #51
powerpc: Remove IBM405 Erratum #77
powerpc/40x: Avoid using r12 in TLB miss handlers
powerpc/40x: Don't save CR in SPRN_SPRG_SCRATCH6
Michal Simek (1):
powerpc: Remove Xilinx PPC405/PPC440 support
Documentation/devicetree/bindings/xilinx.txt | 143 ------
Documentation/powerpc/bootwrapper.rst | 28 +-
arch/powerpc/Kconfig.debug | 2 +-
arch/powerpc/boot/Makefile | 14 +-
arch/powerpc/boot/dts/Makefile | 1 -
arch/powerpc/boot/dts/ep405.dts | 230 ---------
arch/powerpc/boot/dts/virtex440-ml507.dts | 406 ----------------
arch/powerpc/boot/dts/virtex440-ml510.dts | 466 -------------------
arch/powerpc/boot/dts/walnut.dts | 246 ----------
arch/powerpc/boot/ep405.c | 71 ---
arch/powerpc/boot/ops.h | 1 -
arch/powerpc/boot/serial.c | 5 -
arch/powerpc/boot/treeboot-walnut.c | 81 ----
arch/powerpc/boot/uartlite.c | 79 ----
arch/powerpc/boot/virtex.c | 97 ----
arch/powerpc/boot/virtex405-head.S | 31 --
arch/powerpc/boot/wrapper | 8 -
arch/powerpc/configs/40x/acadia_defconfig | 1 -
arch/powerpc/configs/40x/ep405_defconfig | 62 ---
arch/powerpc/configs/40x/kilauea_defconfig | 1 -
arch/powerpc/configs/40x/klondike_defconfig | 1 -
arch/powerpc/configs/40x/makalu_defconfig | 1 -
arch/powerpc/configs/40x/obs600_defconfig | 1 -
arch/powerpc/configs/40x/virtex_defconfig | 75 ---
arch/powerpc/configs/44x/virtex5_defconfig | 74 ---
arch/powerpc/configs/ppc40x_defconfig | 9 -
arch/powerpc/configs/ppc44x_defconfig | 8 -
arch/powerpc/include/asm/asm-405.h | 19 -
arch/powerpc/include/asm/atomic.h | 11 -
arch/powerpc/include/asm/bitops.h | 4 -
arch/powerpc/include/asm/cache.h | 2 +-
arch/powerpc/include/asm/cmpxchg.h | 11 -
arch/powerpc/include/asm/futex.h | 3 -
arch/powerpc/include/asm/nohash/32/pgtable.h | 33 --
arch/powerpc/include/asm/nohash/32/pte-40x.h | 23 +-
arch/powerpc/include/asm/nohash/64/pgtable.h | 27 --
arch/powerpc/include/asm/nohash/pgtable.h | 2 -
arch/powerpc/include/asm/reg_booke.h | 54 ---
arch/powerpc/include/asm/spinlock.h | 4 -
arch/powerpc/include/asm/time.h | 12 -
arch/powerpc/include/asm/xilinx_intc.h | 16 -
arch/powerpc/include/asm/xilinx_pci.h | 21 -
arch/powerpc/kernel/cputable.c | 102 ----
arch/powerpc/kernel/entry_32.S | 11 -
arch/powerpc/kernel/head_40x.S | 316 +++----------
arch/powerpc/kernel/misc_32.S | 9 -
arch/powerpc/kernel/setup-common.c | 4 -
arch/powerpc/mm/nohash/40x.c | 4 +-
arch/powerpc/platforms/40x/Kconfig | 76 ---
arch/powerpc/platforms/40x/Makefile | 3 -
arch/powerpc/platforms/40x/ep405.c | 123 -----
arch/powerpc/platforms/40x/virtex.c | 54 ---
arch/powerpc/platforms/40x/walnut.c | 65 ---
arch/powerpc/platforms/44x/Kconfig | 40 +-
arch/powerpc/platforms/44x/Makefile | 2 -
arch/powerpc/platforms/44x/virtex.c | 60 ---
arch/powerpc/platforms/44x/virtex_ml510.c | 30 --
arch/powerpc/platforms/Kconfig | 4 -
arch/powerpc/sysdev/Makefile | 2 -
arch/powerpc/sysdev/xilinx_intc.c | 88 ----
arch/powerpc/sysdev/xilinx_pci.c | 132 ------
drivers/char/Kconfig | 2 +-
drivers/video/fbdev/Kconfig | 2 +-
63 files changed, 83 insertions(+), 3430 deletions(-)
delete mode 100644 arch/powerpc/boot/dts/ep405.dts
delete mode 100644 arch/powerpc/boot/dts/virtex440-ml507.dts
delete mode 100644 arch/powerpc/boot/dts/virtex440-ml510.dts
delete mode 100644 arch/powerpc/boot/dts/walnut.dts
delete mode 100644 arch/powerpc/boot/ep405.c
delete mode 100644 arch/powerpc/boot/treeboot-walnut.c
delete mode 100644 arch/powerpc/boot/uartlite.c
delete mode 100644 arch/powerpc/boot/virtex.c
delete mode 100644 arch/powerpc/boot/virtex405-head.S
delete mode 100644 arch/powerpc/configs/40x/ep405_defconfig
delete mode 100644 arch/powerpc/configs/40x/virtex_defconfig
delete mode 100644 arch/powerpc/configs/44x/virtex5_defconfig
delete mode 100644 arch/powerpc/include/asm/asm-405.h
delete mode 100644 arch/powerpc/include/asm/xilinx_intc.h
delete mode 100644 arch/powerpc/include/asm/xilinx_pci.h
delete mode 100644 arch/powerpc/platforms/40x/ep405.c
delete mode 100644 arch/powerpc/platforms/40x/virtex.c
delete mode 100644 arch/powerpc/platforms/40x/walnut.c
delete mode 100644 arch/powerpc/platforms/44x/virtex.c
delete mode 100644 arch/powerpc/platforms/44x/virtex_ml510.c
delete mode 100644 arch/powerpc/sysdev/xilinx_intc.c
delete mode 100644 arch/powerpc/sysdev/xilinx_pci.c
--
2.25.0
All platforms selecting the obsolete processor are gone now.
Remove support for it.
Signed-off-by: Christophe Leroy <[email protected]>
---
arch/powerpc/kernel/cputable.c | 13 -------------
arch/powerpc/platforms/40x/Kconfig | 6 ------
2 files changed, 19 deletions(-)
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index bdc4eab0daaf..8ed553734919 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1232,19 +1232,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
},
#endif /* CONFIG_PPC_8xx */
#ifdef CONFIG_40x
- { /* 405GP */
- .pvr_mask = 0xffff0000,
- .pvr_value = 0x40110000,
- .cpu_name = "405GP",
- .cpu_features = CPU_FTRS_40X,
- .cpu_user_features = PPC_FEATURE_32 |
- PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
- .mmu_features = MMU_FTR_TYPE_40x,
- .icache_bsize = 32,
- .dcache_bsize = 32,
- .machine_check = machine_check_4xx,
- .platform = "ppc405",
- },
{ /* STB 04xxx */
.pvr_mask = 0xffff0000,
.pvr_value = 0x41810000,
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index 5d9d96e7223a..253c047fe6fe 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -51,12 +51,6 @@ config PPC40x_SIMPLE
help
This option enables the simple PowerPC 40x platform support.
-config 405GP
- bool
- select IBM405_ERR77
- select IBM405_ERR51
- select IBM_EMAC_ZMII if IBM_EMAC
-
config 405EX
bool
select IBM_EMAC_EMAC4 if IBM_EMAC
--
2.25.0
This erratum was for IBM 403GCX, 405EP and STB03xxx which are
now gone.
Remove this erratum.
Signed-off-by: Christophe Leroy <[email protected]>
---
arch/powerpc/kernel/head_40x.S | 6 ------
arch/powerpc/platforms/40x/Kconfig | 4 ----
2 files changed, 10 deletions(-)
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index b62b6ab769fc..faeea5b56525 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -425,13 +425,7 @@ _ENTRY(saved_ksp_limit)
EXCEPTION(0x1400, Trap_14, unknown_exception, EXC_XFER_STD)
EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_STD)
EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_STD)
-#ifdef CONFIG_IBM405_ERR51
- /* 405GP errata 51 */
- START_EXCEPTION(0x1700, Trap_17)
- b DTLBMiss
-#else
EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_STD)
-#endif
EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_STD)
EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_STD)
EXCEPTION(0x1A00, Trap_1A, unknown_exception, EXC_XFER_STD)
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index 253c047fe6fe..ebe283476461 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -75,10 +75,6 @@ config PPC4xx_GPIO
config IBM405_ERR77
bool
-# All 40x-based cores, up until the 405GPR and 405EP have this errata.
-config IBM405_ERR51
- bool
-
config APM8018X
bool "APM8018X"
depends on 40x
--
2.25.0
CONFIG_WALNUT is not selected by any config and is based
on 405GP which is obsolete.
Remove it.
Signed-off-by: Christophe Leroy <[email protected]>
---
arch/powerpc/boot/Makefile | 5 +-
arch/powerpc/boot/dts/walnut.dts | 246 --------------------
arch/powerpc/boot/treeboot-walnut.c | 81 -------
arch/powerpc/configs/40x/acadia_defconfig | 1 -
arch/powerpc/configs/40x/kilauea_defconfig | 1 -
arch/powerpc/configs/40x/klondike_defconfig | 1 -
arch/powerpc/configs/40x/makalu_defconfig | 1 -
arch/powerpc/configs/40x/obs600_defconfig | 1 -
arch/powerpc/configs/ppc40x_defconfig | 1 -
arch/powerpc/platforms/40x/Kconfig | 18 --
arch/powerpc/platforms/40x/Makefile | 2 -
arch/powerpc/platforms/40x/walnut.c | 65 ------
12 files changed, 1 insertion(+), 422 deletions(-)
delete mode 100644 arch/powerpc/boot/dts/walnut.dts
delete mode 100644 arch/powerpc/boot/treeboot-walnut.c
delete mode 100644 arch/powerpc/platforms/40x/walnut.c
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index d8077b7071dd..865fe2da5a4b 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -75,7 +75,6 @@ $(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
-$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-akebono.o: BOOTCFLAGS += -mcpu=405
@@ -132,7 +131,7 @@ src-wlib-$(CONFIG_CPM) += cpm-serial.c
src-plat-y := of.c epapr.c
src-plat-$(CONFIG_40x) += fixed-head.S ep405.c cuboot-hotfoot.c \
- treeboot-walnut.c cuboot-acadia.c \
+ cuboot-acadia.c \
cuboot-kilauea.c simpleboot.c
src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \
cuboot-bamboo.c cuboot-sam440ep.c \
@@ -276,9 +275,7 @@ image-$(CONFIG_EPAPR_BOOT) += zImage.epapr
#
# Board ports in arch/powerpc/platform/40x/Kconfig
-image-$(CONFIG_EP405) += dtbImage.ep405
image-$(CONFIG_HOTFOOT) += cuImage.hotfoot
-image-$(CONFIG_WALNUT) += treeImage.walnut
image-$(CONFIG_ACADIA) += cuImage.acadia
image-$(CONFIG_OBS600) += uImage.obs600
diff --git a/arch/powerpc/boot/dts/walnut.dts b/arch/powerpc/boot/dts/walnut.dts
deleted file mode 100644
index 0872862c9363..000000000000
--- a/arch/powerpc/boot/dts/walnut.dts
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * Device Tree Source for IBM Walnut
- *
- * Copyright 2007 IBM Corp.
- * Josh Boyer <[email protected]>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
- model = "ibm,walnut";
- compatible = "ibm,walnut";
- dcr-parent = <&{/cpus/cpu@0}>;
-
- aliases {
- ethernet0 = &EMAC;
- serial0 = &UART0;
- serial1 = &UART1;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- model = "PowerPC,405GP";
- reg = <0x00000000>;
- clock-frequency = <200000000>; /* Filled in by zImage */
- timebase-frequency = <0>; /* Filled in by zImage */
- i-cache-line-size = <32>;
- d-cache-line-size = <32>;
- i-cache-size = <16384>;
- d-cache-size = <16384>;
- dcr-controller;
- dcr-access-method = "native";
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x00000000>; /* Filled in by zImage */
- };
-
- UIC0: interrupt-controller {
- compatible = "ibm,uic";
- interrupt-controller;
- cell-index = <0>;
- dcr-reg = <0x0c0 0x009>;
- #address-cells = <0>;
- #size-cells = <0>;
- #interrupt-cells = <2>;
- };
-
- plb {
- compatible = "ibm,plb3";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- clock-frequency = <0>; /* Filled in by zImage */
-
- SDRAM0: memory-controller {
- compatible = "ibm,sdram-405gp";
- dcr-reg = <0x010 0x002>;
- };
-
- MAL: mcmal {
- compatible = "ibm,mcmal-405gp", "ibm,mcmal";
- dcr-reg = <0x180 0x062>;
- num-tx-chans = <1>;
- num-rx-chans = <1>;
- interrupt-parent = <&UIC0>;
- interrupts = <
- 0xb 0x4 /* TXEOB */
- 0xc 0x4 /* RXEOB */
- 0xa 0x4 /* SERR */
- 0xd 0x4 /* TXDE */
- 0xe 0x4 /* RXDE */>;
- };
-
- POB0: opb {
- compatible = "ibm,opb-405gp", "ibm,opb";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0xef600000 0xef600000 0x00a00000>;
- dcr-reg = <0x0a0 0x005>;
- clock-frequency = <0>; /* Filled in by zImage */
-
- UART0: serial@ef600300 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <0xef600300 0x00000008>;
- virtual-reg = <0xef600300>;
- clock-frequency = <0>; /* Filled in by zImage */
- current-speed = <9600>;
- interrupt-parent = <&UIC0>;
- interrupts = <0x0 0x4>;
- };
-
- UART1: serial@ef600400 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <0xef600400 0x00000008>;
- virtual-reg = <0xef600400>;
- clock-frequency = <0>; /* Filled in by zImage */
- current-speed = <9600>;
- interrupt-parent = <&UIC0>;
- interrupts = <0x1 0x4>;
- };
-
- IIC: i2c@ef600500 {
- compatible = "ibm,iic-405gp", "ibm,iic";
- reg = <0xef600500 0x00000011>;
- interrupt-parent = <&UIC0>;
- interrupts = <0x2 0x4>;
- };
-
- GPIO: gpio@ef600700 {
- compatible = "ibm,gpio-405gp";
- reg = <0xef600700 0x00000020>;
- };
-
- EMAC: ethernet@ef600800 {
- device_type = "network";
- compatible = "ibm,emac-405gp", "ibm,emac";
- interrupt-parent = <&UIC0>;
- interrupts = <
- 0xf 0x4 /* Ethernet */
- 0x9 0x4 /* Ethernet Wake Up */>;
- local-mac-address = [000000000000]; /* Filled in by zImage */
- reg = <0xef600800 0x00000070>;
- mal-device = <&MAL>;
- mal-tx-channel = <0>;
- mal-rx-channel = <0>;
- cell-index = <0>;
- max-frame-size = <1500>;
- rx-fifo-size = <4096>;
- tx-fifo-size = <2048>;
- phy-mode = "rmii";
- phy-map = <0x00000001>;
- };
-
- };
-
- EBC0: ebc {
- compatible = "ibm,ebc-405gp", "ibm,ebc";
- dcr-reg = <0x012 0x002>;
- #address-cells = <2>;
- #size-cells = <1>;
- /* The ranges property is supplied by the bootwrapper
- * and is based on the firmware's configuration of the
- * EBC bridge
- */
- clock-frequency = <0>; /* Filled in by zImage */
-
- sram@0,0 {
- reg = <0x00000000 0x00000000 0x00080000>;
- };
-
- flash@0,80000 {
- compatible = "jedec-flash";
- bank-width = <1>;
- reg = <0x00000000 0x00080000 0x00080000>;
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "OpenBIOS";
- reg = <0x00000000 0x00080000>;
- read-only;
- };
- };
-
- nvram@1,0 {
- /* NVRAM and RTC */
- compatible = "ds1743-nvram";
- #bytes = <0x2000>;
- reg = <0x00000001 0x00000000 0x00002000>;
- };
-
- keyboard@2,0 {
- compatible = "intel,82C42PC";
- reg = <0x00000002 0x00000000 0x00000002>;
- };
-
- ir@3,0 {
- compatible = "ti,TIR2000PAG";
- reg = <0x00000003 0x00000000 0x00000010>;
- };
-
- fpga@7,0 {
- compatible = "Walnut-FPGA";
- reg = <0x00000007 0x00000000 0x00000010>;
- virtual-reg = <0xf0300005>;
- };
- };
-
- PCI0: pci@ec000000 {
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- compatible = "ibm,plb405gp-pci", "ibm,plb-pci";
- primary;
- reg = <0xeec00000 0x00000008 /* Config space access */
- 0xeed80000 0x00000004 /* IACK */
- 0xeed80000 0x00000004 /* Special cycle */
- 0xef480000 0x00000040>; /* Internal registers */
-
- /* Outbound ranges, one memory and one IO,
- * later cannot be changed. Chip supports a second
- * IO range but we don't use it for now
- */
- ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
- 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
-
- /* Inbound 2GB range starting at 0 */
- dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
-
- /* Walnut has all 4 IRQ pins tied together per slot */
- interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
- interrupt-map = <
- /* IDSEL 1 */
- 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
-
- /* IDSEL 2 */
- 0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8
-
- /* IDSEL 3 */
- 0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8
-
- /* IDSEL 4 */
- 0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8
- >;
- };
- };
-
- chosen {
- stdout-path = "/plb/opb/serial@ef600300";
- };
-};
diff --git a/arch/powerpc/boot/treeboot-walnut.c b/arch/powerpc/boot/treeboot-walnut.c
deleted file mode 100644
index 623f58e7f7c9..000000000000
--- a/arch/powerpc/boot/treeboot-walnut.c
+++ /dev/null
@@ -1,81 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Old U-boot compatibility for Walnut
- *
- * Author: Josh Boyer <[email protected]>
- *
- * Copyright 2007 IBM Corporation
- * Based on cuboot-83xx.c, which is:
- * Copyright (c) 2007 Freescale Semiconductor, Inc.
- */
-
-#include "ops.h"
-#include "stdio.h"
-#include "dcr.h"
-#include "4xx.h"
-#include "io.h"
-
-BSS_STACK(4096);
-
-static void walnut_flashsel_fixup(void)
-{
- void *devp, *sram;
- u32 reg_flash[3] = {0x0, 0x0, 0x80000};
- u32 reg_sram[3] = {0x0, 0x0, 0x80000};
- u8 *fpga;
- u8 fpga_brds1 = 0x0;
-
- devp = finddevice("/plb/ebc/fpga");
- if (!devp)
- fatal("Couldn't locate FPGA node\n\r");
-
- if (getprop(devp, "virtual-reg", &fpga, sizeof(fpga)) != sizeof(fpga))
- fatal("no virtual-reg property\n\r");
-
- fpga_brds1 = in_8(fpga);
-
- devp = finddevice("/plb/ebc/flash");
- if (!devp)
- fatal("Couldn't locate flash node\n\r");
-
- if (getprop(devp, "reg", reg_flash, sizeof(reg_flash)) != sizeof(reg_flash))
- fatal("flash reg property has unexpected size\n\r");
-
- sram = finddevice("/plb/ebc/sram");
- if (!sram)
- fatal("Couldn't locate sram node\n\r");
-
- if (getprop(sram, "reg", reg_sram, sizeof(reg_sram)) != sizeof(reg_sram))
- fatal("sram reg property has unexpected size\n\r");
-
- if (fpga_brds1 & 0x1) {
- reg_flash[1] ^= 0x80000;
- reg_sram[1] ^= 0x80000;
- }
-
- setprop(devp, "reg", reg_flash, sizeof(reg_flash));
- setprop(sram, "reg", reg_sram, sizeof(reg_sram));
-}
-
-#define WALNUT_OPENBIOS_MAC_OFF 0xfffffe0b
-static void walnut_fixups(void)
-{
- ibm4xx_sdram_fixup_memsize();
- ibm405gp_fixup_clocks(33330000, 0xa8c000);
- ibm4xx_quiesce_eth((u32 *)0xef600800, NULL);
- ibm4xx_fixup_ebc_ranges("/plb/ebc");
- walnut_flashsel_fixup();
- dt_fixup_mac_address_by_alias("ethernet0", (u8 *) WALNUT_OPENBIOS_MAC_OFF);
-}
-
-void platform_init(void)
-{
- unsigned long end_of_ram = 0x2000000;
- unsigned long avail_ram = end_of_ram - (unsigned long) _end;
-
- simple_alloc_init(_end, avail_ram, 32, 32);
- platform_ops.fixups = walnut_fixups;
- platform_ops.exit = ibm40x_dbcr_reset;
- fdt_init(_dtb_start);
- serial_console_init();
-}
diff --git a/arch/powerpc/configs/40x/acadia_defconfig b/arch/powerpc/configs/40x/acadia_defconfig
index db93c117be36..25eed86ec528 100644
--- a/arch/powerpc/configs/40x/acadia_defconfig
+++ b/arch/powerpc/configs/40x/acadia_defconfig
@@ -9,7 +9,6 @@ CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ACADIA=y
-# CONFIG_WALNUT is not set
CONFIG_PCI=y
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig
index edc22464dfb5..3549c9e950e8 100644
--- a/arch/powerpc/configs/40x/kilauea_defconfig
+++ b/arch/powerpc/configs/40x/kilauea_defconfig
@@ -11,7 +11,6 @@ CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_KILAUEA=y
-# CONFIG_WALNUT is not set
CONFIG_PCI=y
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/powerpc/configs/40x/klondike_defconfig b/arch/powerpc/configs/40x/klondike_defconfig
index 579fa846839c..6a735ee75715 100644
--- a/arch/powerpc/configs/40x/klondike_defconfig
+++ b/arch/powerpc/configs/40x/klondike_defconfig
@@ -8,7 +8,6 @@ CONFIG_EMBEDDED=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_WALNUT is not set
CONFIG_APM8018X=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_MATH_EMULATION=y
diff --git a/arch/powerpc/configs/40x/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig
index 188789b9aa4c..4563f88acf0c 100644
--- a/arch/powerpc/configs/40x/makalu_defconfig
+++ b/arch/powerpc/configs/40x/makalu_defconfig
@@ -9,7 +9,6 @@ CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_MAKALU=y
-# CONFIG_WALNUT is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
diff --git a/arch/powerpc/configs/40x/obs600_defconfig b/arch/powerpc/configs/40x/obs600_defconfig
index 5bf6af7ef093..2a2bb3f46847 100644
--- a/arch/powerpc/configs/40x/obs600_defconfig
+++ b/arch/powerpc/configs/40x/obs600_defconfig
@@ -10,7 +10,6 @@ CONFIG_KALLSYMS_ALL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_WALNUT is not set
CONFIG_OBS600=y
CONFIG_MATH_EMULATION=y
CONFIG_NET=y
diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig
index 88960a72b525..25f6c91e843a 100644
--- a/arch/powerpc/configs/ppc40x_defconfig
+++ b/arch/powerpc/configs/ppc40x_defconfig
@@ -10,7 +10,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PPC4xx_GPIO=y
CONFIG_ACADIA=y
-CONFIG_EP405=y
CONFIG_HOTFOOT=y
CONFIG_KILAUEA=y
CONFIG_MAKALU=y
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index ca8f44650647..5d9d96e7223a 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -7,14 +7,6 @@ config ACADIA
help
This option enables support for the AMCC 405EZ Acadia evaluation board.
-config EP405
- bool "EP405/EP405PC"
- depends on 40x
- select 405GP
- select FORCE_PCI
- help
- This option enables support for the EP405/EP405PC boards.
-
config HOTFOOT
bool "Hotfoot"
depends on 40x
@@ -45,16 +37,6 @@ config MAKALU
help
This option enables support for the AMCC PPC405EX board.
-config WALNUT
- bool "Walnut"
- depends on 40x
- default y
- select 405GP
- select FORCE_PCI
- select OF_RTC
- help
- This option enables support for the IBM PPC405GP evaluation board.
-
config OBS600
bool "OpenBlockS 600"
depends on 40x
diff --git a/arch/powerpc/platforms/40x/Makefile b/arch/powerpc/platforms/40x/Makefile
index e9386deed505..122de98527c4 100644
--- a/arch/powerpc/platforms/40x/Makefile
+++ b/arch/powerpc/platforms/40x/Makefile
@@ -1,4 +1,2 @@
# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_WALNUT) += walnut.o
-obj-$(CONFIG_EP405) += ep405.o
obj-$(CONFIG_PPC40x_SIMPLE) += ppc40x_simple.o
diff --git a/arch/powerpc/platforms/40x/walnut.c b/arch/powerpc/platforms/40x/walnut.c
deleted file mode 100644
index e5797815e2f1..000000000000
--- a/arch/powerpc/platforms/40x/walnut.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Architecture- / platform-specific boot-time initialization code for
- * IBM PowerPC 4xx based boards. Adapted from original
- * code by Gary Thomas, Cort Dougan <[email protected]>, and Dan Malek
- * <[email protected]>.
- *
- * Copyright(c) 1999-2000 Grant Erickson <[email protected]>
- *
- * Rewritten and ported to the merged powerpc tree:
- * Copyright 2007 IBM Corporation
- * Josh Boyer <[email protected]>
- *
- * 2002 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/of_platform.h>
-#include <linux/rtc.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc4xx.h>
-
-static const struct of_device_id walnut_of_bus[] __initconst = {
- { .compatible = "ibm,plb3", },
- { .compatible = "ibm,opb", },
- { .compatible = "ibm,ebc", },
- {},
-};
-
-static int __init walnut_device_probe(void)
-{
- of_platform_bus_probe(NULL, walnut_of_bus, NULL);
- of_instantiate_rtc();
-
- return 0;
-}
-machine_device_initcall(walnut, walnut_device_probe);
-
-static int __init walnut_probe(void)
-{
- if (!of_machine_is_compatible("ibm,walnut"))
- return 0;
-
- pci_set_flags(PCI_REASSIGN_ALL_RSRC);
-
- return 1;
-}
-
-define_machine(walnut) {
- .name = "Walnut",
- .probe = walnut_probe,
- .progress = udbg_progress,
- .init_IRQ = uic_init_tree,
- .get_irq = uic_get_irq,
- .restart = ppc4xx_reset_system,
- .calibrate_decr = generic_calibrate_decr,
-};
--
2.25.0
This erratum is dedicated to IBM 405GP and STB03xxx
which are now gone.
Remove this erratum.
Signed-off-by: Christophe Leroy <[email protected]>
---
arch/powerpc/include/asm/asm-405.h | 19 -------------------
arch/powerpc/include/asm/atomic.h | 11 -----------
arch/powerpc/include/asm/bitops.h | 4 ----
arch/powerpc/include/asm/cmpxchg.h | 11 -----------
arch/powerpc/include/asm/futex.h | 3 ---
arch/powerpc/include/asm/nohash/32/pgtable.h | 1 -
arch/powerpc/include/asm/spinlock.h | 4 ----
arch/powerpc/kernel/entry_32.S | 11 -----------
arch/powerpc/kernel/head_40x.S | 3 ---
arch/powerpc/platforms/40x/Kconfig | 6 ------
10 files changed, 73 deletions(-)
delete mode 100644 arch/powerpc/include/asm/asm-405.h
diff --git a/arch/powerpc/include/asm/asm-405.h b/arch/powerpc/include/asm/asm-405.h
deleted file mode 100644
index 7270d3ae7c8e..000000000000
--- a/arch/powerpc/include/asm/asm-405.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _ASM_POWERPC_ASM_405_H
-#define _ASM_POWERPC_ASM_405_H
-
-#include <asm/asm-const.h>
-
-#ifdef __KERNEL__
-#ifdef CONFIG_IBM405_ERR77
-/* Erratum #77 on the 405 means we need a sync or dcbt before every
- * stwcx. The old ATOMIC_SYNC_FIX covered some but not all of this.
- */
-#define PPC405_ERR77(ra,rb) stringify_in_c(dcbt ra, rb;)
-#define PPC405_ERR77_SYNC stringify_in_c(sync;)
-#else
-#define PPC405_ERR77(ra,rb)
-#define PPC405_ERR77_SYNC
-#endif
-#endif
-
-#endif /* _ASM_POWERPC_ASM_405_H */
diff --git a/arch/powerpc/include/asm/atomic.h b/arch/powerpc/include/asm/atomic.h
index 31c231ea56b7..498785ffc25f 100644
--- a/arch/powerpc/include/asm/atomic.h
+++ b/arch/powerpc/include/asm/atomic.h
@@ -10,7 +10,6 @@
#include <linux/types.h>
#include <asm/cmpxchg.h>
#include <asm/barrier.h>
-#include <asm/asm-405.h>
#define ATOMIC_INIT(i) { (i) }
@@ -47,7 +46,6 @@ static __inline__ void atomic_##op(int a, atomic_t *v) \
__asm__ __volatile__( \
"1: lwarx %0,0,%3 # atomic_" #op "\n" \
#asm_op " %0,%2,%0\n" \
- PPC405_ERR77(0,%3) \
" stwcx. %0,0,%3 \n" \
" bne- 1b\n" \
: "=&r" (t), "+m" (v->counter) \
@@ -63,7 +61,6 @@ static inline int atomic_##op##_return_relaxed(int a, atomic_t *v) \
__asm__ __volatile__( \
"1: lwarx %0,0,%3 # atomic_" #op "_return_relaxed\n" \
#asm_op " %0,%2,%0\n" \
- PPC405_ERR77(0, %3) \
" stwcx. %0,0,%3\n" \
" bne- 1b\n" \
: "=&r" (t), "+m" (v->counter) \
@@ -81,7 +78,6 @@ static inline int atomic_fetch_##op##_relaxed(int a, atomic_t *v) \
__asm__ __volatile__( \
"1: lwarx %0,0,%4 # atomic_fetch_" #op "_relaxed\n" \
#asm_op " %1,%3,%0\n" \
- PPC405_ERR77(0, %4) \
" stwcx. %1,0,%4\n" \
" bne- 1b\n" \
: "=&r" (res), "=&r" (t), "+m" (v->counter) \
@@ -130,7 +126,6 @@ static __inline__ void atomic_inc(atomic_t *v)
__asm__ __volatile__(
"1: lwarx %0,0,%2 # atomic_inc\n\
addic %0,%0,1\n"
- PPC405_ERR77(0,%2)
" stwcx. %0,0,%2 \n\
bne- 1b"
: "=&r" (t), "+m" (v->counter)
@@ -146,7 +141,6 @@ static __inline__ int atomic_inc_return_relaxed(atomic_t *v)
__asm__ __volatile__(
"1: lwarx %0,0,%2 # atomic_inc_return_relaxed\n"
" addic %0,%0,1\n"
- PPC405_ERR77(0, %2)
" stwcx. %0,0,%2\n"
" bne- 1b"
: "=&r" (t), "+m" (v->counter)
@@ -163,7 +157,6 @@ static __inline__ void atomic_dec(atomic_t *v)
__asm__ __volatile__(
"1: lwarx %0,0,%2 # atomic_dec\n\
addic %0,%0,-1\n"
- PPC405_ERR77(0,%2)\
" stwcx. %0,0,%2\n\
bne- 1b"
: "=&r" (t), "+m" (v->counter)
@@ -179,7 +172,6 @@ static __inline__ int atomic_dec_return_relaxed(atomic_t *v)
__asm__ __volatile__(
"1: lwarx %0,0,%2 # atomic_dec_return_relaxed\n"
" addic %0,%0,-1\n"
- PPC405_ERR77(0, %2)
" stwcx. %0,0,%2\n"
" bne- 1b"
: "=&r" (t), "+m" (v->counter)
@@ -220,7 +212,6 @@ static __inline__ int atomic_fetch_add_unless(atomic_t *v, int a, int u)
cmpw 0,%0,%3 \n\
beq 2f \n\
add %0,%2,%0 \n"
- PPC405_ERR77(0,%2)
" stwcx. %0,0,%1 \n\
bne- 1b \n"
PPC_ATOMIC_EXIT_BARRIER
@@ -251,7 +242,6 @@ static __inline__ int atomic_inc_not_zero(atomic_t *v)
cmpwi 0,%0,0\n\
beq- 2f\n\
addic %1,%0,1\n"
- PPC405_ERR77(0,%2)
" stwcx. %1,0,%2\n\
bne- 1b\n"
PPC_ATOMIC_EXIT_BARRIER
@@ -280,7 +270,6 @@ static __inline__ int atomic_dec_if_positive(atomic_t *v)
cmpwi %0,1\n\
addi %0,%0,-1\n\
blt- 2f\n"
- PPC405_ERR77(0,%1)
" stwcx. %0,0,%1\n\
bne- 1b"
PPC_ATOMIC_EXIT_BARRIER
diff --git a/arch/powerpc/include/asm/bitops.h b/arch/powerpc/include/asm/bitops.h
index 28dcf8222943..4a4d3afd5340 100644
--- a/arch/powerpc/include/asm/bitops.h
+++ b/arch/powerpc/include/asm/bitops.h
@@ -41,7 +41,6 @@
#include <linux/compiler.h>
#include <asm/asm-compat.h>
#include <asm/synch.h>
-#include <asm/asm-405.h>
/* PPC bit number conversion */
#define PPC_BITLSHIFT(be) (BITS_PER_LONG - 1 - (be))
@@ -73,7 +72,6 @@ static inline void fn(unsigned long mask, \
prefix \
"1:" PPC_LLARX(%0,0,%3,0) "\n" \
stringify_in_c(op) "%0,%0,%2\n" \
- PPC405_ERR77(0,%3) \
PPC_STLCX "%0,0,%3\n" \
"bne- 1b\n" \
: "=&r" (old), "+m" (*p) \
@@ -119,7 +117,6 @@ static inline unsigned long fn( \
prefix \
"1:" PPC_LLARX(%0,0,%3,eh) "\n" \
stringify_in_c(op) "%1,%0,%2\n" \
- PPC405_ERR77(0,%3) \
PPC_STLCX "%1,0,%3\n" \
"bne- 1b\n" \
postfix \
@@ -175,7 +172,6 @@ clear_bit_unlock_return_word(int nr, volatile unsigned long *addr)
PPC_RELEASE_BARRIER
"1:" PPC_LLARX(%0,0,%3,0) "\n"
"andc %1,%0,%2\n"
- PPC405_ERR77(0,%3)
PPC_STLCX "%1,0,%3\n"
"bne- 1b\n"
: "=&r" (old), "=&r" (t)
diff --git a/arch/powerpc/include/asm/cmpxchg.h b/arch/powerpc/include/asm/cmpxchg.h
index 27183871eb3b..cf091c4c22e5 100644
--- a/arch/powerpc/include/asm/cmpxchg.h
+++ b/arch/powerpc/include/asm/cmpxchg.h
@@ -6,7 +6,6 @@
#include <linux/compiler.h>
#include <asm/synch.h>
#include <linux/bug.h>
-#include <asm/asm-405.h>
#ifdef __BIG_ENDIAN
#define BITOFF_CAL(size, off) ((sizeof(u32) - size - off) * BITS_PER_BYTE)
@@ -29,7 +28,6 @@ static inline u32 __xchg_##type##sfx(volatile void *p, u32 val) \
"1: lwarx %0,0,%3\n" \
" andc %1,%0,%5\n" \
" or %1,%1,%4\n" \
- PPC405_ERR77(0,%3) \
" stwcx. %1,0,%3\n" \
" bne- 1b\n" \
: "=&r" (prev), "=&r" (tmp), "+m" (*(u32*)p) \
@@ -60,7 +58,6 @@ u32 __cmpxchg_##type##sfx(volatile void *p, u32 old, u32 new) \
" bne- 2f\n" \
" andc %1,%0,%6\n" \
" or %1,%1,%5\n" \
- PPC405_ERR77(0,%3) \
" stwcx. %1,0,%3\n" \
" bne- 1b\n" \
br2 \
@@ -92,7 +89,6 @@ __xchg_u32_local(volatile void *p, unsigned long val)
__asm__ __volatile__(
"1: lwarx %0,0,%2 \n"
- PPC405_ERR77(0,%2)
" stwcx. %3,0,%2 \n\
bne- 1b"
: "=&r" (prev), "+m" (*(volatile unsigned int *)p)
@@ -109,7 +105,6 @@ __xchg_u32_relaxed(u32 *p, unsigned long val)
__asm__ __volatile__(
"1: lwarx %0,0,%2\n"
- PPC405_ERR77(0, %2)
" stwcx. %3,0,%2\n"
" bne- 1b"
: "=&r" (prev), "+m" (*p)
@@ -127,7 +122,6 @@ __xchg_u64_local(volatile void *p, unsigned long val)
__asm__ __volatile__(
"1: ldarx %0,0,%2 \n"
- PPC405_ERR77(0,%2)
" stdcx. %3,0,%2 \n\
bne- 1b"
: "=&r" (prev), "+m" (*(volatile unsigned long *)p)
@@ -144,7 +138,6 @@ __xchg_u64_relaxed(u64 *p, unsigned long val)
__asm__ __volatile__(
"1: ldarx %0,0,%2\n"
- PPC405_ERR77(0, %2)
" stdcx. %3,0,%2\n"
" bne- 1b"
: "=&r" (prev), "+m" (*p)
@@ -229,7 +222,6 @@ __cmpxchg_u32(volatile unsigned int *p, unsigned long old, unsigned long new)
"1: lwarx %0,0,%2 # __cmpxchg_u32\n\
cmpw 0,%0,%3\n\
bne- 2f\n"
- PPC405_ERR77(0,%2)
" stwcx. %4,0,%2\n\
bne- 1b"
PPC_ATOMIC_EXIT_BARRIER
@@ -252,7 +244,6 @@ __cmpxchg_u32_local(volatile unsigned int *p, unsigned long old,
"1: lwarx %0,0,%2 # __cmpxchg_u32\n\
cmpw 0,%0,%3\n\
bne- 2f\n"
- PPC405_ERR77(0,%2)
" stwcx. %4,0,%2\n\
bne- 1b"
"\n\
@@ -273,7 +264,6 @@ __cmpxchg_u32_relaxed(u32 *p, unsigned long old, unsigned long new)
"1: lwarx %0,0,%2 # __cmpxchg_u32_relaxed\n"
" cmpw 0,%0,%3\n"
" bne- 2f\n"
- PPC405_ERR77(0, %2)
" stwcx. %4,0,%2\n"
" bne- 1b\n"
"2:"
@@ -301,7 +291,6 @@ __cmpxchg_u32_acquire(u32 *p, unsigned long old, unsigned long new)
"1: lwarx %0,0,%2 # __cmpxchg_u32_acquire\n"
" cmpw 0,%0,%3\n"
" bne- 2f\n"
- PPC405_ERR77(0, %2)
" stwcx. %4,0,%2\n"
" bne- 1b\n"
PPC_ACQUIRE_BARRIER
diff --git a/arch/powerpc/include/asm/futex.h b/arch/powerpc/include/asm/futex.h
index f187bb5e524e..e93ee3202e4c 100644
--- a/arch/powerpc/include/asm/futex.h
+++ b/arch/powerpc/include/asm/futex.h
@@ -8,14 +8,12 @@
#include <linux/uaccess.h>
#include <asm/errno.h>
#include <asm/synch.h>
-#include <asm/asm-405.h>
#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
__asm__ __volatile ( \
PPC_ATOMIC_ENTRY_BARRIER \
"1: lwarx %0,0,%2\n" \
insn \
- PPC405_ERR77(0, %2) \
"2: stwcx. %1,0,%2\n" \
"bne- 1b\n" \
PPC_ATOMIC_EXIT_BARRIER \
@@ -82,7 +80,6 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
"1: lwarx %1,0,%3 # futex_atomic_cmpxchg_inatomic\n\
cmpw 0,%1,%4\n\
bne- 3f\n"
- PPC405_ERR77(0,%3)
"2: stwcx. %5,0,%3\n\
bne- 1b\n"
PPC_ATOMIC_EXIT_BARRIER
diff --git a/arch/powerpc/include/asm/nohash/32/pgtable.h b/arch/powerpc/include/asm/nohash/32/pgtable.h
index fdbfcc44fea8..bbeb7c543274 100644
--- a/arch/powerpc/include/asm/nohash/32/pgtable.h
+++ b/arch/powerpc/include/asm/nohash/32/pgtable.h
@@ -9,7 +9,6 @@
#include <linux/sched.h>
#include <linux/threads.h>
#include <asm/mmu.h> /* For sub-arch specific PPC_PIN_SIZE */
-#include <asm/asm-405.h>
#ifdef CONFIG_44x
extern int icache_44x_need_flush;
diff --git a/arch/powerpc/include/asm/spinlock.h b/arch/powerpc/include/asm/spinlock.h
index 860228e917dc..2d620896cdae 100644
--- a/arch/powerpc/include/asm/spinlock.h
+++ b/arch/powerpc/include/asm/spinlock.h
@@ -23,7 +23,6 @@
#endif
#include <asm/synch.h>
#include <asm/ppc-opcode.h>
-#include <asm/asm-405.h>
#ifdef CONFIG_PPC64
/* use 0x800000yy when locked, where yy == CPU number */
@@ -210,7 +209,6 @@ static inline long __arch_read_trylock(arch_rwlock_t *rw)
__DO_SIGN_EXTEND
" addic. %0,%0,1\n\
ble- 2f\n"
- PPC405_ERR77(0,%1)
" stwcx. %0,0,%1\n\
bne- 1b\n"
PPC_ACQUIRE_BARRIER
@@ -234,7 +232,6 @@ static inline long __arch_write_trylock(arch_rwlock_t *rw)
"1: " PPC_LWARX(%0,0,%2,1) "\n\
cmpwi 0,%0,0\n\
bne- 2f\n"
- PPC405_ERR77(0,%1)
" stwcx. %1,0,%2\n\
bne- 1b\n"
PPC_ACQUIRE_BARRIER
@@ -292,7 +289,6 @@ static inline void arch_read_unlock(arch_rwlock_t *rw)
PPC_RELEASE_BARRIER
"1: lwarx %0,0,%1\n\
addic %0,%0,-1\n"
- PPC405_ERR77(0,%1)
" stwcx. %0,0,%1\n\
bne- 1b"
: "=&r"(tmp)
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index a6371fb8f761..8ea50472528c 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -28,7 +28,6 @@
#include <asm/unistd.h>
#include <asm/ptrace.h>
#include <asm/export.h>
-#include <asm/asm-405.h>
#include <asm/feature-fixups.h>
#include <asm/barrier.h>
#include <asm/kup.h>
@@ -541,9 +540,6 @@ syscall_exit_work:
addi r12,r2,TI_FLAGS
3: lwarx r8,0,r12
andc r8,r8,r11
-#ifdef CONFIG_IBM405_ERR77
- dcbt 0,r12
-#endif
stwcx. r8,0,r12
bne- 3b
@@ -918,9 +914,6 @@ resume_kernel:
addi r5,r2,TI_FLAGS
0: lwarx r8,0,r5
andc r8,r8,r11
-#ifdef CONFIG_IBM405_ERR77
- dcbt 0,r5
-#endif
stwcx. r8,0,r5
bne- 0b
1:
@@ -997,7 +990,6 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x)
mtspr SPRN_XER,r10
mtctr r11
- PPC405_ERR77(0,r1)
BEGIN_FTR_SECTION
lwarx r11,0,r1
END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
@@ -1066,7 +1058,6 @@ exc_exit_start:
lwz r1,GPR1(r1)
.globl exc_exit_restart_end
exc_exit_restart_end:
- PPC405_ERR77_SYNC
rfi
b . /* prevent prefetch past rfi */
@@ -1109,7 +1100,6 @@ exc_exit_restart_end:
lwz r11,_CTR(r1); \
mtspr SPRN_XER,r10; \
mtctr r11; \
- PPC405_ERR77(0,r1); \
stwcx. r0,0,r1; /* to clear the reservation */ \
lwz r11,_LINK(r1); \
mtlr r11; \
@@ -1129,7 +1119,6 @@ exc_exit_restart_end:
lwz r10,GPR10(r1); \
lwz r11,GPR11(r1); \
lwz r1,GPR1(r1); \
- PPC405_ERR77_SYNC; \
exc_lvl_rfi; \
b .; /* prevent prefetch past exc_lvl_rfi */
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index faeea5b56525..afa93a36437b 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -36,7 +36,6 @@
#include <asm/asm-offsets.h>
#include <asm/ptrace.h>
#include <asm/export.h>
-#include <asm/asm-405.h>
#include "head_32.h"
@@ -486,7 +485,6 @@ _ENTRY(saved_ksp_limit)
lwz r12,GPR12(r11)
lwz r10,crit_r10@l(0)
lwz r11,crit_r11@l(0)
- PPC405_ERR77_SYNC
rfci
b .
@@ -568,7 +566,6 @@ finish_tlb_load:
mfspr r12, SPRN_SPRG_SCRATCH3
mfspr r11, SPRN_SPRG_SCRATCH1
mfspr r10, SPRN_SPRG_SCRATCH0
- PPC405_ERR77_SYNC
rfi /* Should sync shadow TLBs */
b . /* prevent prefetch past rfi */
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index ebe283476461..e3e5217c9822 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -69,12 +69,6 @@ config PPC4xx_GPIO
help
Enable gpiolib support for ppc40x based boards
-# 40x errata/workaround config symbols, selected by the CPU models above
-
-# All 405-based cores up until the 405GPR and 405EP have this errata.
-config IBM405_ERR77
- bool
-
config APM8018X
bool "APM8018X"
depends on 40x
--
2.25.0
CONFIG_403GCX is not user selectable and is not
selected by any platform.
Remove it.
Signed-off-by: Christophe Leroy <[email protected]>
---
arch/powerpc/include/asm/cache.h | 2 +-
arch/powerpc/include/asm/reg_booke.h | 54 ----------------------------
arch/powerpc/include/asm/time.h | 12 -------
arch/powerpc/kernel/cputable.c | 37 -------------------
arch/powerpc/kernel/head_40x.S | 45 -----------------------
arch/powerpc/kernel/misc_32.S | 9 -----
arch/powerpc/kernel/setup-common.c | 4 ---
arch/powerpc/platforms/40x/Kconfig | 6 ----
8 files changed, 1 insertion(+), 168 deletions(-)
diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h
index 609cab1d58f2..2124b7090db9 100644
--- a/arch/powerpc/include/asm/cache.h
+++ b/arch/powerpc/include/asm/cache.h
@@ -6,7 +6,7 @@
/* bytes per L1 cache line */
-#if defined(CONFIG_PPC_8xx) || defined(CONFIG_403GCX)
+#if defined(CONFIG_PPC_8xx)
#define L1_CACHE_SHIFT 4
#define MAX_COPY_PREFETCH 1
#define IFETCH_ALIGN_SHIFT 2
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index f26fe482fbca..ff30f1076162 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -663,60 +663,6 @@
#define EPC_EPID 0x00003fff
#define EPC_EPID_SHIFT 0
-/*
- * The IBM-403 is an even more odd special case, as it is much
- * older than the IBM-405 series. We put these down here incase someone
- * wishes to support these machines again.
- */
-#ifdef CONFIG_403GCX
-/* Special Purpose Registers (SPRNs)*/
-#define SPRN_TBHU 0x3CC /* Time Base High User-mode */
-#define SPRN_TBLU 0x3CD /* Time Base Low User-mode */
-#define SPRN_CDBCR 0x3D7 /* Cache Debug Control Register */
-#define SPRN_TBHI 0x3DC /* Time Base High */
-#define SPRN_TBLO 0x3DD /* Time Base Low */
-#define SPRN_DBCR 0x3F2 /* Debug Control Register */
-#define SPRN_PBL1 0x3FC /* Protection Bound Lower 1 */
-#define SPRN_PBL2 0x3FE /* Protection Bound Lower 2 */
-#define SPRN_PBU1 0x3FD /* Protection Bound Upper 1 */
-#define SPRN_PBU2 0x3FF /* Protection Bound Upper 2 */
-
-
-/* Bit definitions for the DBCR. */
-#define DBCR_EDM DBCR0_EDM
-#define DBCR_IDM DBCR0_IDM
-#define DBCR_RST(x) (((x) & 0x3) << 28)
-#define DBCR_RST_NONE 0
-#define DBCR_RST_CORE 1
-#define DBCR_RST_CHIP 2
-#define DBCR_RST_SYSTEM 3
-#define DBCR_IC DBCR0_IC /* Instruction Completion Debug Evnt */
-#define DBCR_BT DBCR0_BT /* Branch Taken Debug Event */
-#define DBCR_EDE DBCR0_EDE /* Exception Debug Event */
-#define DBCR_TDE DBCR0_TDE /* TRAP Debug Event */
-#define DBCR_FER 0x00F80000 /* First Events Remaining Mask */
-#define DBCR_FT 0x00040000 /* Freeze Timers on Debug Event */
-#define DBCR_IA1 0x00020000 /* Instr. Addr. Compare 1 Enable */
-#define DBCR_IA2 0x00010000 /* Instr. Addr. Compare 2 Enable */
-#define DBCR_D1R 0x00008000 /* Data Addr. Compare 1 Read Enable */
-#define DBCR_D1W 0x00004000 /* Data Addr. Compare 1 Write Enable */
-#define DBCR_D1S(x) (((x) & 0x3) << 12) /* Data Adrr. Compare 1 Size */
-#define DAC_BYTE 0
-#define DAC_HALF 1
-#define DAC_WORD 2
-#define DAC_QUAD 3
-#define DBCR_D2R 0x00000800 /* Data Addr. Compare 2 Read Enable */
-#define DBCR_D2W 0x00000400 /* Data Addr. Compare 2 Write Enable */
-#define DBCR_D2S(x) (((x) & 0x3) << 8) /* Data Addr. Compare 2 Size */
-#define DBCR_SBT 0x00000040 /* Second Branch Taken Debug Event */
-#define DBCR_SED 0x00000020 /* Second Exception Debug Event */
-#define DBCR_STD 0x00000010 /* Second Trap Debug Event */
-#define DBCR_SIA 0x00000008 /* Second IAC Enable */
-#define DBCR_SDA 0x00000004 /* Second DAC Enable */
-#define DBCR_JOI 0x00000002 /* JTAG Serial Outbound Int. Enable */
-#define DBCR_JII 0x00000001 /* JTAG Serial Inbound Int. Enable */
-#endif /* 403GCX */
-
/* Some 476 specific registers */
#define SPRN_SSPCR 830
#define SPRN_USPCR 831
diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h
index 39ce95016a3a..b287cfc2dd85 100644
--- a/arch/powerpc/include/asm/time.h
+++ b/arch/powerpc/include/asm/time.h
@@ -51,24 +51,12 @@ struct div_result {
static inline unsigned long get_tbl(void)
{
-#if defined(CONFIG_403GCX)
- unsigned long tbl;
- asm volatile("mfspr %0, 0x3dd" : "=r" (tbl));
- return tbl;
-#else
return mftbl();
-#endif
}
static inline unsigned int get_tbu(void)
{
-#ifdef CONFIG_403GCX
- unsigned int tbu;
- asm volatile("mfspr %0, 0x3dc" : "=r" (tbu));
- return tbu;
-#else
return mftbu();
-#endif
}
#endif /* !CONFIG_PPC64 */
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index cae9764b929e..61bd8fb408b2 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1232,43 +1232,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
},
#endif /* CONFIG_PPC_8xx */
#ifdef CONFIG_40x
- { /* 403GC */
- .pvr_mask = 0xffffff00,
- .pvr_value = 0x00200200,
- .cpu_name = "403GC",
- .cpu_features = CPU_FTRS_40X,
- .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
- .mmu_features = MMU_FTR_TYPE_40x,
- .icache_bsize = 16,
- .dcache_bsize = 16,
- .machine_check = machine_check_4xx,
- .platform = "ppc403",
- },
- { /* 403GCX */
- .pvr_mask = 0xffffff00,
- .pvr_value = 0x00201400,
- .cpu_name = "403GCX",
- .cpu_features = CPU_FTRS_40X,
- .cpu_user_features = PPC_FEATURE_32 |
- PPC_FEATURE_HAS_MMU | PPC_FEATURE_NO_TB,
- .mmu_features = MMU_FTR_TYPE_40x,
- .icache_bsize = 16,
- .dcache_bsize = 16,
- .machine_check = machine_check_4xx,
- .platform = "ppc403",
- },
- { /* 403G ?? */
- .pvr_mask = 0xffff0000,
- .pvr_value = 0x00200000,
- .cpu_name = "403G ??",
- .cpu_features = CPU_FTRS_40X,
- .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
- .mmu_features = MMU_FTR_TYPE_40x,
- .icache_bsize = 16,
- .dcache_bsize = 16,
- .machine_check = machine_check_4xx,
- .platform = "ppc403",
- },
{ /* 405GP */
.pvr_mask = 0xffff0000,
.pvr_value = 0x40110000,
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index 08cf4cf083b1..b62b6ab769fc 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -252,21 +252,12 @@ _ENTRY(saved_ksp_limit)
START_EXCEPTION(0x1100, DTLBMiss)
mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */
mtspr SPRN_SPRG_SCRATCH1, r11
-#ifdef CONFIG_403GCX
- stw r12, 0(r0)
- stw r9, 4(r0)
- mfcr r11
- mfspr r12, SPRN_PID
- stw r11, 8(r0)
- stw r12, 12(r0)
-#else
mtspr SPRN_SPRG_SCRATCH3, r12
mtspr SPRN_SPRG_SCRATCH4, r9
mfcr r11
mfspr r12, SPRN_PID
mtspr SPRN_SPRG_SCRATCH6, r11
mtspr SPRN_SPRG_SCRATCH5, r12
-#endif
mfspr r10, SPRN_DEAR /* Get faulting address */
/* If we are faulting a kernel address, we have to use the
@@ -332,21 +323,12 @@ _ENTRY(saved_ksp_limit)
/* The bailout. Restore registers to pre-exception conditions
* and call the heavyweights to help us out.
*/
-#ifdef CONFIG_403GCX
- lwz r12, 12(r0)
- lwz r11, 8(r0)
- mtspr SPRN_PID, r12
- mtcr r11
- lwz r9, 4(r0)
- lwz r12, 0(r0)
-#else
mfspr r12, SPRN_SPRG_SCRATCH5
mfspr r11, SPRN_SPRG_SCRATCH6
mtspr SPRN_PID, r12
mtcr r11
mfspr r9, SPRN_SPRG_SCRATCH4
mfspr r12, SPRN_SPRG_SCRATCH3
-#endif
mfspr r11, SPRN_SPRG_SCRATCH1
mfspr r10, SPRN_SPRG_SCRATCH0
b DataStorage
@@ -358,21 +340,12 @@ _ENTRY(saved_ksp_limit)
START_EXCEPTION(0x1200, ITLBMiss)
mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */
mtspr SPRN_SPRG_SCRATCH1, r11
-#ifdef CONFIG_403GCX
- stw r12, 0(r0)
- stw r9, 4(r0)
- mfcr r11
- mfspr r12, SPRN_PID
- stw r11, 8(r0)
- stw r12, 12(r0)
-#else
mtspr SPRN_SPRG_SCRATCH3, r12
mtspr SPRN_SPRG_SCRATCH4, r9
mfcr r11
mfspr r12, SPRN_PID
mtspr SPRN_SPRG_SCRATCH6, r11
mtspr SPRN_SPRG_SCRATCH5, r12
-#endif
mfspr r10, SPRN_SRR0 /* Get faulting address */
/* If we are faulting a kernel address, we have to use the
@@ -438,21 +411,12 @@ _ENTRY(saved_ksp_limit)
/* The bailout. Restore registers to pre-exception conditions
* and call the heavyweights to help us out.
*/
-#ifdef CONFIG_403GCX
- lwz r12, 12(r0)
- lwz r11, 8(r0)
- mtspr SPRN_PID, r12
- mtcr r11
- lwz r9, 4(r0)
- lwz r12, 0(r0)
-#else
mfspr r12, SPRN_SPRG_SCRATCH5
mfspr r11, SPRN_SPRG_SCRATCH6
mtspr SPRN_PID, r12
mtcr r11
mfspr r9, SPRN_SPRG_SCRATCH4
mfspr r12, SPRN_SPRG_SCRATCH3
-#endif
mfspr r11, SPRN_SPRG_SCRATCH1
mfspr r10, SPRN_SPRG_SCRATCH0
b InstructionAccess
@@ -602,21 +566,12 @@ finish_tlb_load:
/* Done...restore registers and get out of here.
*/
-#ifdef CONFIG_403GCX
- lwz r12, 12(r0)
- lwz r11, 8(r0)
- mtspr SPRN_PID, r12
- mtcr r11
- lwz r9, 4(r0)
- lwz r12, 0(r0)
-#else
mfspr r12, SPRN_SPRG_SCRATCH5
mfspr r11, SPRN_SPRG_SCRATCH6
mtspr SPRN_PID, r12
mtcr r11
mfspr r9, SPRN_SPRG_SCRATCH4
mfspr r12, SPRN_SPRG_SCRATCH3
-#endif
mfspr r11, SPRN_SPRG_SCRATCH1
mfspr r10, SPRN_SPRG_SCRATCH0
PPC405_ERR77_SYNC
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index d80212be8698..70bb885b14c6 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -274,17 +274,8 @@ _GLOBAL(real_writeb)
#ifndef CONFIG_PPC_8xx
_GLOBAL(flush_instruction_cache)
#if defined(CONFIG_4xx)
-#ifdef CONFIG_403GCX
- li r3, 512
- mtctr r3
- lis r4, KERNELBASE@h
-1: iccci 0, r4
- addi r4, r4, 16
- bdnz 1b
-#else
lis r3, KERNELBASE@h
iccci 0,r3
-#endif
#elif defined(CONFIG_FSL_BOOKE)
#ifdef CONFIG_E200
mfspr r3,SPRN_L1CSR0
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index f9c0d888ce8a..c376a0588039 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -306,10 +306,6 @@ static int show_cpuinfo(struct seq_file *m, void *v)
}
} else {
switch (PVR_VER(pvr)) {
- case 0x0020: /* 403 family */
- maj = PVR_MAJ(pvr) + 1;
- min = PVR_MIN(pvr);
- break;
case 0x1008: /* 740P/750P ?? */
maj = ((pvr >> 8) & 0xFF) - 1;
min = pvr & 0xFF;
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index d06ca51e8443..8669be59948c 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -69,12 +69,6 @@ config PPC40x_SIMPLE
help
This option enables the simple PowerPC 40x platform support.
-# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
-config 403GCX
- bool
- #depends on OAK
- select IBM405_ERR51
-
config 405GP
bool
select IBM405_ERR77
--
2.25.0