2021-01-24 07:45:21

by William Breathitt Gray

[permalink] [raw]
Subject: [PATCH 0/2] Remove the IIO counter ABI

The IIO counter driver has been superseded by the Counter subsystem as
discussed in [1]. This patchset removes the IIO counter ABI code and
documentation.

[1] https://lore.kernel.org/lkml/[email protected]/

William Breathitt Gray (2):
counter: 104-quad-8: Remove IIO counter ABI
iio: Remove the IIO counter ABI documentation

Documentation/ABI/testing/sysfs-bus-iio | 40 --
.../testing/sysfs-bus-iio-counter-104-quad-8 | 133 ----
MAINTAINERS | 1 -
drivers/counter/104-quad-8.c | 652 ++----------------
drivers/counter/Kconfig | 2 +-
5 files changed, 65 insertions(+), 763 deletions(-)
delete mode 100644 Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8

--
2.30.0


2021-01-24 07:46:09

by William Breathitt Gray

[permalink] [raw]
Subject: [PATCH 1/2] counter: 104-quad-8: Remove IIO counter ABI

The IIO counter driver has been superseded by the Counter subsystem as
discussed in [1]. This patch removes the IIO counter ABI from the
104-QUAD-8 driver.

[1] https://lore.kernel.org/lkml/[email protected]/

Cc: Syed Nayyar Waris <[email protected]>
Signed-off-by: William Breathitt Gray <[email protected]>
---
.../testing/sysfs-bus-iio-counter-104-quad-8 | 133 ----
MAINTAINERS | 1 -
drivers/counter/104-quad-8.c | 652 ++----------------
drivers/counter/Kconfig | 2 +-
4 files changed, 65 insertions(+), 723 deletions(-)
delete mode 100644 Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8

diff --git a/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8 b/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8
deleted file mode 100644
index bac3d0d48b7b..000000000000
--- a/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8
+++ /dev/null
@@ -1,133 +0,0 @@
-What: /sys/bus/iio/devices/iio:deviceX/in_count_count_mode_available
-What: /sys/bus/iio/devices/iio:deviceX/in_count_noise_error_available
-What: /sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
-What: /sys/bus/iio/devices/iio:deviceX/in_index_index_polarity_available
-What: /sys/bus/iio/devices/iio:deviceX/in_index_synchronous_mode_available
-KernelVersion: 4.10
-Contact: [email protected]
-Description:
- This interface is deprecated; please use the Counter subsystem.
-
- Discrete set of available values for the respective counter
- configuration are listed in this file.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_countY_count_mode
-KernelVersion: 4.10
-Contact: [email protected]
-Description:
- This interface is deprecated; please use the Counter subsystem.
-
- Count mode for channel Y. Four count modes are available:
- normal, range limit, non-recycle, and modulo-n. The preset value
- for channel Y is used by the count mode where required.
-
- Normal:
- Counting is continuous in either direction.
-
- Range Limit:
- An upper or lower limit is set, mimicking limit switches
- in the mechanical counterpart. The upper limit is set to
- the preset value, while the lower limit is set to 0. The
- counter freezes at count = preset when counting up, and
- at count = 0 when counting down. At either of these
- limits, the counting is resumed only when the count
- direction is reversed.
-
- Non-recycle:
- Counter is disabled whenever a 24-bit count overflow or
- underflow takes place. The counter is re-enabled when a
- new count value is loaded to the counter via a preset
- operation or write to raw.
-
- Modulo-N:
- A count boundary is set between 0 and the preset value.
- The counter is reset to 0 at count = preset when
- counting up, while the counter is set to the preset
- value at count = 0 when counting down; the counter does
- not freeze at the bundary points, but counts
- continuously throughout.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_countY_noise_error
-KernelVersion: 4.10
-Contact: [email protected]
-Description:
- This interface is deprecated; please use the Counter subsystem.
-
- Read-only attribute that indicates whether excessive noise is
- present at the channel Y count inputs in quadrature clock mode;
- irrelevant in non-quadrature clock mode.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_countY_preset
-KernelVersion: 4.10
-Contact: [email protected]
-Description:
- This interface is deprecated; please use the Counter subsystem.
-
- If the counter device supports preset registers, the preset
- count for channel Y is provided by this attribute.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_countY_quadrature_mode
-KernelVersion: 4.10
-Contact: [email protected]
-Description:
- This interface is deprecated; please use the Counter subsystem.
-
- Configure channel Y counter for non-quadrature or quadrature
- clock mode. Selecting non-quadrature clock mode will disable
- synchronous load mode. In quadrature clock mode, the channel Y
- scale attribute selects the encoder phase division (scale of 1
- selects full-cycle, scale of 0.5 selects half-cycle, scale of
- 0.25 selects quarter-cycle) processed by the channel Y counter.
-
- Non-quadrature:
- The filter and decoder circuit are bypassed. Encoder A
- input serves as the count input and B as the UP/DOWN
- direction control input, with B = 1 selecting UP Count
- mode and B = 0 selecting Down Count mode.
-
- Quadrature:
- Encoder A and B inputs are digitally filtered and
- decoded for UP/DN clock.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_countY_set_to_preset_on_index
-KernelVersion: 4.10
-Contact: [email protected]
-Description:
- This interface is deprecated; please use the Counter subsystem.
-
- Whether to set channel Y counter with channel Y preset value
- when channel Y index input is active, or continuously count.
- Valid attribute values are boolean.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_indexY_index_polarity
-KernelVersion: 4.10
-Contact: [email protected]
-Description:
- This interface is deprecated; please use the Counter subsystem.
-
- Active level of channel Y index input; irrelevant in
- non-synchronous load mode.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_indexY_synchronous_mode
-KernelVersion: 4.10
-Contact: [email protected]
-Description:
- This interface is deprecated; please use the Counter subsystem.
-
- Configure channel Y counter for non-synchronous or synchronous
- load mode. Synchronous load mode cannot be selected in
- non-quadrature clock mode.
-
- Non-synchronous:
- A logic low level is the active level at this index
- input. The index function (as enabled via
- set_to_preset_on_index) is performed directly on the
- active level of the index input.
-
- Synchronous:
- Intended for interfacing with encoder Index output in
- quadrature clock mode. The active level is configured
- via index_polarity. The index function (as enabled via
- set_to_preset_on_index) is performed synchronously with
- the quadrature clock on the active level of the index
- input.
diff --git a/MAINTAINERS b/MAINTAINERS
index 546aa66428c9..f2d94e1f4032 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -298,7 +298,6 @@ M: Syed Nayyar Waris <[email protected]>
L: [email protected]
S: Maintained
F: Documentation/ABI/testing/sysfs-bus-counter-104-quad-8
-F: Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8
F: drivers/counter/104-quad-8.c

ACCES PCI-IDIO-16 GPIO DRIVER
diff --git a/drivers/counter/104-quad-8.c b/drivers/counter/104-quad-8.c
index 78766b6ec271..da7bf9975723 100644
--- a/drivers/counter/104-quad-8.c
+++ b/drivers/counter/104-quad-8.c
@@ -9,8 +9,6 @@
#include <linux/counter.h>
#include <linux/device.h>
#include <linux/errno.h>
-#include <linux/iio/iio.h>
-#include <linux/iio/types.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/isa.h>
@@ -29,7 +27,7 @@ MODULE_PARM_DESC(base, "ACCES 104-QUAD-8 base addresses");
#define QUAD8_NUM_COUNTERS 8

/**
- * struct quad8_iio - IIO device private data structure
+ * struct quad8 - device private data structure
* @counter: instance of the counter_device
* @fck_prescaler: array of filter clock prescaler configurations
* @preset: array of preset values
@@ -41,9 +39,9 @@ MODULE_PARM_DESC(base, "ACCES 104-QUAD-8 base addresses");
* @synchronous_mode: array of index function synchronous mode configurations
* @index_polarity: array of index function polarity configurations
* @cable_fault_enable: differential encoder cable status enable configurations
- * @base: base port address of the IIO device
+ * @base: base port address of the device
*/
-struct quad8_iio {
+struct quad8 {
struct mutex lock;
struct counter_device counter;
unsigned int fck_prescaler[QUAD8_NUM_COUNTERS];
@@ -98,532 +96,10 @@ struct quad8_iio {
#define QUAD8_CMR_QUADRATURE_X2 0x10
#define QUAD8_CMR_QUADRATURE_X4 0x18

-
-static int quad8_read_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan, int *val, int *val2, long mask)
-{
- struct quad8_iio *const priv = iio_priv(indio_dev);
- const int base_offset = priv->base + 2 * chan->channel;
- unsigned int flags;
- unsigned int borrow;
- unsigned int carry;
- int i;
-
- switch (mask) {
- case IIO_CHAN_INFO_RAW:
- if (chan->type == IIO_INDEX) {
- *val = !!(inb(priv->base + QUAD8_REG_INDEX_INPUT_LEVELS)
- & BIT(chan->channel));
- return IIO_VAL_INT;
- }
-
- flags = inb(base_offset + 1);
- borrow = flags & QUAD8_FLAG_BT;
- carry = !!(flags & QUAD8_FLAG_CT);
-
- /* Borrow XOR Carry effectively doubles count range */
- *val = (borrow ^ carry) << 24;
-
- mutex_lock(&priv->lock);
-
- /* Reset Byte Pointer; transfer Counter to Output Latch */
- outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_CNTR_OUT,
- base_offset + 1);
-
- for (i = 0; i < 3; i++)
- *val |= (unsigned int)inb(base_offset) << (8 * i);
-
- mutex_unlock(&priv->lock);
-
- return IIO_VAL_INT;
- case IIO_CHAN_INFO_ENABLE:
- *val = priv->ab_enable[chan->channel];
- return IIO_VAL_INT;
- case IIO_CHAN_INFO_SCALE:
- *val = 1;
- *val2 = priv->quadrature_scale[chan->channel];
- return IIO_VAL_FRACTIONAL_LOG2;
- }
-
- return -EINVAL;
-}
-
-static int quad8_write_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan, int val, int val2, long mask)
-{
- struct quad8_iio *const priv = iio_priv(indio_dev);
- const int base_offset = priv->base + 2 * chan->channel;
- int i;
- unsigned int ior_cfg;
-
- switch (mask) {
- case IIO_CHAN_INFO_RAW:
- if (chan->type == IIO_INDEX)
- return -EINVAL;
-
- /* Only 24-bit values are supported */
- if ((unsigned int)val > 0xFFFFFF)
- return -EINVAL;
-
- mutex_lock(&priv->lock);
-
- /* Reset Byte Pointer */
- outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
-
- /* Counter can only be set via Preset Register */
- for (i = 0; i < 3; i++)
- outb(val >> (8 * i), base_offset);
-
- /* Transfer Preset Register to Counter */
- outb(QUAD8_CTR_RLD | QUAD8_RLD_PRESET_CNTR, base_offset + 1);
-
- /* Reset Byte Pointer */
- outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
-
- /* Set Preset Register back to original value */
- val = priv->preset[chan->channel];
- for (i = 0; i < 3; i++)
- outb(val >> (8 * i), base_offset);
-
- /* Reset Borrow, Carry, Compare, and Sign flags */
- outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_FLAGS, base_offset + 1);
- /* Reset Error flag */
- outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_E, base_offset + 1);
-
- mutex_unlock(&priv->lock);
-
- return 0;
- case IIO_CHAN_INFO_ENABLE:
- /* only boolean values accepted */
- if (val < 0 || val > 1)
- return -EINVAL;
-
- mutex_lock(&priv->lock);
-
- priv->ab_enable[chan->channel] = val;
-
- ior_cfg = val | priv->preset_enable[chan->channel] << 1;
-
- /* Load I/O control configuration */
- outb(QUAD8_CTR_IOR | ior_cfg, base_offset + 1);
-
- mutex_unlock(&priv->lock);
-
- return 0;
- case IIO_CHAN_INFO_SCALE:
- mutex_lock(&priv->lock);
-
- /* Quadrature scaling only available in quadrature mode */
- if (!priv->quadrature_mode[chan->channel] &&
- (val2 || val != 1)) {
- mutex_unlock(&priv->lock);
- return -EINVAL;
- }
-
- /* Only three gain states (1, 0.5, 0.25) */
- if (val == 1 && !val2)
- priv->quadrature_scale[chan->channel] = 0;
- else if (!val)
- switch (val2) {
- case 500000:
- priv->quadrature_scale[chan->channel] = 1;
- break;
- case 250000:
- priv->quadrature_scale[chan->channel] = 2;
- break;
- default:
- mutex_unlock(&priv->lock);
- return -EINVAL;
- }
- else {
- mutex_unlock(&priv->lock);
- return -EINVAL;
- }
-
- mutex_unlock(&priv->lock);
- return 0;
- }
-
- return -EINVAL;
-}
-
-static const struct iio_info quad8_info = {
- .read_raw = quad8_read_raw,
- .write_raw = quad8_write_raw
-};
-
-static ssize_t quad8_read_preset(struct iio_dev *indio_dev, uintptr_t private,
- const struct iio_chan_spec *chan, char *buf)
-{
- const struct quad8_iio *const priv = iio_priv(indio_dev);
-
- return snprintf(buf, PAGE_SIZE, "%u\n", priv->preset[chan->channel]);
-}
-
-static ssize_t quad8_write_preset(struct iio_dev *indio_dev, uintptr_t private,
- const struct iio_chan_spec *chan, const char *buf, size_t len)
-{
- struct quad8_iio *const priv = iio_priv(indio_dev);
- const int base_offset = priv->base + 2 * chan->channel;
- unsigned int preset;
- int ret;
- int i;
-
- ret = kstrtouint(buf, 0, &preset);
- if (ret)
- return ret;
-
- /* Only 24-bit values are supported */
- if (preset > 0xFFFFFF)
- return -EINVAL;
-
- mutex_lock(&priv->lock);
-
- priv->preset[chan->channel] = preset;
-
- /* Reset Byte Pointer */
- outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
-
- /* Set Preset Register */
- for (i = 0; i < 3; i++)
- outb(preset >> (8 * i), base_offset);
-
- mutex_unlock(&priv->lock);
-
- return len;
-}
-
-static ssize_t quad8_read_set_to_preset_on_index(struct iio_dev *indio_dev,
- uintptr_t private, const struct iio_chan_spec *chan, char *buf)
-{
- const struct quad8_iio *const priv = iio_priv(indio_dev);
-
- return snprintf(buf, PAGE_SIZE, "%u\n",
- !priv->preset_enable[chan->channel]);
-}
-
-static ssize_t quad8_write_set_to_preset_on_index(struct iio_dev *indio_dev,
- uintptr_t private, const struct iio_chan_spec *chan, const char *buf,
- size_t len)
-{
- struct quad8_iio *const priv = iio_priv(indio_dev);
- const int base_offset = priv->base + 2 * chan->channel + 1;
- bool preset_enable;
- int ret;
- unsigned int ior_cfg;
-
- ret = kstrtobool(buf, &preset_enable);
- if (ret)
- return ret;
-
- /* Preset enable is active low in Input/Output Control register */
- preset_enable = !preset_enable;
-
- mutex_lock(&priv->lock);
-
- priv->preset_enable[chan->channel] = preset_enable;
-
- ior_cfg = priv->ab_enable[chan->channel] |
- (unsigned int)preset_enable << 1;
-
- /* Load I/O control configuration to Input / Output Control Register */
- outb(QUAD8_CTR_IOR | ior_cfg, base_offset);
-
- mutex_unlock(&priv->lock);
-
- return len;
-}
-
-static const char *const quad8_noise_error_states[] = {
- "No excessive noise is present at the count inputs",
- "Excessive noise is present at the count inputs"
-};
-
-static int quad8_get_noise_error(struct iio_dev *indio_dev,
- const struct iio_chan_spec *chan)
-{
- struct quad8_iio *const priv = iio_priv(indio_dev);
- const int base_offset = priv->base + 2 * chan->channel + 1;
-
- return !!(inb(base_offset) & QUAD8_FLAG_E);
-}
-
-static const struct iio_enum quad8_noise_error_enum = {
- .items = quad8_noise_error_states,
- .num_items = ARRAY_SIZE(quad8_noise_error_states),
- .get = quad8_get_noise_error
-};
-
-static const char *const quad8_count_direction_states[] = {
- "down",
- "up"
-};
-
-static int quad8_get_count_direction(struct iio_dev *indio_dev,
- const struct iio_chan_spec *chan)
-{
- struct quad8_iio *const priv = iio_priv(indio_dev);
- const int base_offset = priv->base + 2 * chan->channel + 1;
-
- return !!(inb(base_offset) & QUAD8_FLAG_UD);
-}
-
-static const struct iio_enum quad8_count_direction_enum = {
- .items = quad8_count_direction_states,
- .num_items = ARRAY_SIZE(quad8_count_direction_states),
- .get = quad8_get_count_direction
-};
-
-static const char *const quad8_count_modes[] = {
- "normal",
- "range limit",
- "non-recycle",
- "modulo-n"
-};
-
-static int quad8_set_count_mode(struct iio_dev *indio_dev,
- const struct iio_chan_spec *chan, unsigned int cnt_mode)
-{
- struct quad8_iio *const priv = iio_priv(indio_dev);
- unsigned int mode_cfg = cnt_mode << 1;
- const int base_offset = priv->base + 2 * chan->channel + 1;
-
- mutex_lock(&priv->lock);
-
- priv->count_mode[chan->channel] = cnt_mode;
-
- /* Add quadrature mode configuration */
- if (priv->quadrature_mode[chan->channel])
- mode_cfg |= (priv->quadrature_scale[chan->channel] + 1) << 3;
-
- /* Load mode configuration to Counter Mode Register */
- outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
-
- mutex_unlock(&priv->lock);
-
- return 0;
-}
-
-static int quad8_get_count_mode(struct iio_dev *indio_dev,
- const struct iio_chan_spec *chan)
-{
- const struct quad8_iio *const priv = iio_priv(indio_dev);
-
- return priv->count_mode[chan->channel];
-}
-
-static const struct iio_enum quad8_count_mode_enum = {
- .items = quad8_count_modes,
- .num_items = ARRAY_SIZE(quad8_count_modes),
- .set = quad8_set_count_mode,
- .get = quad8_get_count_mode
-};
-
-static const char *const quad8_synchronous_modes[] = {
- "non-synchronous",
- "synchronous"
-};
-
-static int quad8_set_synchronous_mode(struct iio_dev *indio_dev,
- const struct iio_chan_spec *chan, unsigned int synchronous_mode)
-{
- struct quad8_iio *const priv = iio_priv(indio_dev);
- const int base_offset = priv->base + 2 * chan->channel + 1;
- unsigned int idr_cfg = synchronous_mode;
-
- mutex_lock(&priv->lock);
-
- idr_cfg |= priv->index_polarity[chan->channel] << 1;
-
- /* Index function must be non-synchronous in non-quadrature mode */
- if (synchronous_mode && !priv->quadrature_mode[chan->channel]) {
- mutex_unlock(&priv->lock);
- return -EINVAL;
- }
-
- priv->synchronous_mode[chan->channel] = synchronous_mode;
-
- /* Load Index Control configuration to Index Control Register */
- outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
-
- mutex_unlock(&priv->lock);
-
- return 0;
-}
-
-static int quad8_get_synchronous_mode(struct iio_dev *indio_dev,
- const struct iio_chan_spec *chan)
-{
- const struct quad8_iio *const priv = iio_priv(indio_dev);
-
- return priv->synchronous_mode[chan->channel];
-}
-
-static const struct iio_enum quad8_synchronous_mode_enum = {
- .items = quad8_synchronous_modes,
- .num_items = ARRAY_SIZE(quad8_synchronous_modes),
- .set = quad8_set_synchronous_mode,
- .get = quad8_get_synchronous_mode
-};
-
-static const char *const quad8_quadrature_modes[] = {
- "non-quadrature",
- "quadrature"
-};
-
-static int quad8_set_quadrature_mode(struct iio_dev *indio_dev,
- const struct iio_chan_spec *chan, unsigned int quadrature_mode)
-{
- struct quad8_iio *const priv = iio_priv(indio_dev);
- const int base_offset = priv->base + 2 * chan->channel + 1;
- unsigned int mode_cfg;
-
- mutex_lock(&priv->lock);
-
- mode_cfg = priv->count_mode[chan->channel] << 1;
-
- if (quadrature_mode)
- mode_cfg |= (priv->quadrature_scale[chan->channel] + 1) << 3;
- else {
- /* Quadrature scaling only available in quadrature mode */
- priv->quadrature_scale[chan->channel] = 0;
-
- /* Synchronous function not supported in non-quadrature mode */
- if (priv->synchronous_mode[chan->channel])
- quad8_set_synchronous_mode(indio_dev, chan, 0);
- }
-
- priv->quadrature_mode[chan->channel] = quadrature_mode;
-
- /* Load mode configuration to Counter Mode Register */
- outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
-
- mutex_unlock(&priv->lock);
-
- return 0;
-}
-
-static int quad8_get_quadrature_mode(struct iio_dev *indio_dev,
- const struct iio_chan_spec *chan)
-{
- const struct quad8_iio *const priv = iio_priv(indio_dev);
-
- return priv->quadrature_mode[chan->channel];
-}
-
-static const struct iio_enum quad8_quadrature_mode_enum = {
- .items = quad8_quadrature_modes,
- .num_items = ARRAY_SIZE(quad8_quadrature_modes),
- .set = quad8_set_quadrature_mode,
- .get = quad8_get_quadrature_mode
-};
-
-static const char *const quad8_index_polarity_modes[] = {
- "negative",
- "positive"
-};
-
-static int quad8_set_index_polarity(struct iio_dev *indio_dev,
- const struct iio_chan_spec *chan, unsigned int index_polarity)
-{
- struct quad8_iio *const priv = iio_priv(indio_dev);
- const int base_offset = priv->base + 2 * chan->channel + 1;
- unsigned int idr_cfg = index_polarity << 1;
-
- mutex_lock(&priv->lock);
-
- idr_cfg |= priv->synchronous_mode[chan->channel];
-
- priv->index_polarity[chan->channel] = index_polarity;
-
- /* Load Index Control configuration to Index Control Register */
- outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
-
- mutex_unlock(&priv->lock);
-
- return 0;
-}
-
-static int quad8_get_index_polarity(struct iio_dev *indio_dev,
- const struct iio_chan_spec *chan)
-{
- const struct quad8_iio *const priv = iio_priv(indio_dev);
-
- return priv->index_polarity[chan->channel];
-}
-
-static const struct iio_enum quad8_index_polarity_enum = {
- .items = quad8_index_polarity_modes,
- .num_items = ARRAY_SIZE(quad8_index_polarity_modes),
- .set = quad8_set_index_polarity,
- .get = quad8_get_index_polarity
-};
-
-static const struct iio_chan_spec_ext_info quad8_count_ext_info[] = {
- {
- .name = "preset",
- .shared = IIO_SEPARATE,
- .read = quad8_read_preset,
- .write = quad8_write_preset
- },
- {
- .name = "set_to_preset_on_index",
- .shared = IIO_SEPARATE,
- .read = quad8_read_set_to_preset_on_index,
- .write = quad8_write_set_to_preset_on_index
- },
- IIO_ENUM("noise_error", IIO_SEPARATE, &quad8_noise_error_enum),
- IIO_ENUM_AVAILABLE("noise_error", &quad8_noise_error_enum),
- IIO_ENUM("count_direction", IIO_SEPARATE, &quad8_count_direction_enum),
- IIO_ENUM_AVAILABLE("count_direction", &quad8_count_direction_enum),
- IIO_ENUM("count_mode", IIO_SEPARATE, &quad8_count_mode_enum),
- IIO_ENUM_AVAILABLE("count_mode", &quad8_count_mode_enum),
- IIO_ENUM("quadrature_mode", IIO_SEPARATE, &quad8_quadrature_mode_enum),
- IIO_ENUM_AVAILABLE("quadrature_mode", &quad8_quadrature_mode_enum),
- {}
-};
-
-static const struct iio_chan_spec_ext_info quad8_index_ext_info[] = {
- IIO_ENUM("synchronous_mode", IIO_SEPARATE,
- &quad8_synchronous_mode_enum),
- IIO_ENUM_AVAILABLE("synchronous_mode", &quad8_synchronous_mode_enum),
- IIO_ENUM("index_polarity", IIO_SEPARATE, &quad8_index_polarity_enum),
- IIO_ENUM_AVAILABLE("index_polarity", &quad8_index_polarity_enum),
- {}
-};
-
-#define QUAD8_COUNT_CHAN(_chan) { \
- .type = IIO_COUNT, \
- .channel = (_chan), \
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
- BIT(IIO_CHAN_INFO_ENABLE) | BIT(IIO_CHAN_INFO_SCALE), \
- .ext_info = quad8_count_ext_info, \
- .indexed = 1 \
-}
-
-#define QUAD8_INDEX_CHAN(_chan) { \
- .type = IIO_INDEX, \
- .channel = (_chan), \
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
- .ext_info = quad8_index_ext_info, \
- .indexed = 1 \
-}
-
-static const struct iio_chan_spec quad8_channels[] = {
- QUAD8_COUNT_CHAN(0), QUAD8_INDEX_CHAN(0),
- QUAD8_COUNT_CHAN(1), QUAD8_INDEX_CHAN(1),
- QUAD8_COUNT_CHAN(2), QUAD8_INDEX_CHAN(2),
- QUAD8_COUNT_CHAN(3), QUAD8_INDEX_CHAN(3),
- QUAD8_COUNT_CHAN(4), QUAD8_INDEX_CHAN(4),
- QUAD8_COUNT_CHAN(5), QUAD8_INDEX_CHAN(5),
- QUAD8_COUNT_CHAN(6), QUAD8_INDEX_CHAN(6),
- QUAD8_COUNT_CHAN(7), QUAD8_INDEX_CHAN(7)
-};
-
static int quad8_signal_read(struct counter_device *counter,
struct counter_signal *signal, enum counter_signal_value *val)
{
- const struct quad8_iio *const priv = counter->priv;
+ const struct quad8 *const priv = counter->priv;
unsigned int state;

/* Only Index signal levels can be read */
@@ -641,7 +117,7 @@ static int quad8_signal_read(struct counter_device *counter,
static int quad8_count_read(struct counter_device *counter,
struct counter_count *count, unsigned long *val)
{
- struct quad8_iio *const priv = counter->priv;
+ struct quad8 *const priv = counter->priv;
const int base_offset = priv->base + 2 * count->id;
unsigned int flags;
unsigned int borrow;
@@ -672,7 +148,7 @@ static int quad8_count_read(struct counter_device *counter,
static int quad8_count_write(struct counter_device *counter,
struct counter_count *count, unsigned long val)
{
- struct quad8_iio *const priv = counter->priv;
+ struct quad8 *const priv = counter->priv;
const int base_offset = priv->base + 2 * count->id;
int i;

@@ -727,7 +203,7 @@ static enum counter_count_function quad8_count_functions_list[] = {
static int quad8_function_get(struct counter_device *counter,
struct counter_count *count, size_t *function)
{
- struct quad8_iio *const priv = counter->priv;
+ struct quad8 *const priv = counter->priv;
const int id = count->id;

mutex_lock(&priv->lock);
@@ -755,7 +231,7 @@ static int quad8_function_get(struct counter_device *counter,
static int quad8_function_set(struct counter_device *counter,
struct counter_count *count, size_t function)
{
- struct quad8_iio *const priv = counter->priv;
+ struct quad8 *const priv = counter->priv;
const int id = count->id;
unsigned int *const quadrature_mode = priv->quadrature_mode + id;
unsigned int *const scale = priv->quadrature_scale + id;
@@ -811,7 +287,7 @@ static int quad8_function_set(struct counter_device *counter,
static void quad8_direction_get(struct counter_device *counter,
struct counter_count *count, enum counter_count_direction *direction)
{
- const struct quad8_iio *const priv = counter->priv;
+ const struct quad8 *const priv = counter->priv;
unsigned int ud_flag;
const unsigned int flag_addr = priv->base + 2 * count->id + 1;

@@ -845,7 +321,7 @@ static int quad8_action_get(struct counter_device *counter,
struct counter_count *count, struct counter_synapse *synapse,
size_t *action)
{
- struct quad8_iio *const priv = counter->priv;
+ struct quad8 *const priv = counter->priv;
int err;
size_t function = 0;
const size_t signal_a_id = count->synapses[0].signal->id;
@@ -905,10 +381,15 @@ static const struct counter_ops quad8_ops = {
.action_get = quad8_action_get
};

+static const char *const quad8_index_polarity_modes[] = {
+ "negative",
+ "positive"
+};
+
static int quad8_index_polarity_get(struct counter_device *counter,
struct counter_signal *signal, size_t *index_polarity)
{
- const struct quad8_iio *const priv = counter->priv;
+ const struct quad8 *const priv = counter->priv;
const size_t channel_id = signal->id - 16;

*index_polarity = priv->index_polarity[channel_id];
@@ -919,7 +400,7 @@ static int quad8_index_polarity_get(struct counter_device *counter,
static int quad8_index_polarity_set(struct counter_device *counter,
struct counter_signal *signal, size_t index_polarity)
{
- struct quad8_iio *const priv = counter->priv;
+ struct quad8 *const priv = counter->priv;
const size_t channel_id = signal->id - 16;
const int base_offset = priv->base + 2 * channel_id + 1;
unsigned int idr_cfg = index_polarity << 1;
@@ -945,10 +426,15 @@ static struct counter_signal_enum_ext quad8_index_pol_enum = {
.set = quad8_index_polarity_set
};

+static const char *const quad8_synchronous_modes[] = {
+ "non-synchronous",
+ "synchronous"
+};
+
static int quad8_synchronous_mode_get(struct counter_device *counter,
struct counter_signal *signal, size_t *synchronous_mode)
{
- const struct quad8_iio *const priv = counter->priv;
+ const struct quad8 *const priv = counter->priv;
const size_t channel_id = signal->id - 16;

*synchronous_mode = priv->synchronous_mode[channel_id];
@@ -959,7 +445,7 @@ static int quad8_synchronous_mode_get(struct counter_device *counter,
static int quad8_synchronous_mode_set(struct counter_device *counter,
struct counter_signal *signal, size_t synchronous_mode)
{
- struct quad8_iio *const priv = counter->priv;
+ struct quad8 *const priv = counter->priv;
const size_t channel_id = signal->id - 16;
const int base_offset = priv->base + 2 * channel_id + 1;
unsigned int idr_cfg = synchronous_mode;
@@ -1001,7 +487,7 @@ static ssize_t quad8_count_floor_read(struct counter_device *counter,
static int quad8_count_mode_get(struct counter_device *counter,
struct counter_count *count, size_t *cnt_mode)
{
- const struct quad8_iio *const priv = counter->priv;
+ const struct quad8 *const priv = counter->priv;

/* Map 104-QUAD-8 count mode to Generic Counter count mode */
switch (priv->count_mode[count->id]) {
@@ -1025,7 +511,7 @@ static int quad8_count_mode_get(struct counter_device *counter,
static int quad8_count_mode_set(struct counter_device *counter,
struct counter_count *count, size_t cnt_mode)
{
- struct quad8_iio *const priv = counter->priv;
+ struct quad8 *const priv = counter->priv;
unsigned int mode_cfg;
const int base_offset = priv->base + 2 * count->id + 1;

@@ -1084,7 +570,7 @@ static ssize_t quad8_count_direction_read(struct counter_device *counter,
static ssize_t quad8_count_enable_read(struct counter_device *counter,
struct counter_count *count, void *private, char *buf)
{
- const struct quad8_iio *const priv = counter->priv;
+ const struct quad8 *const priv = counter->priv;

return sprintf(buf, "%u\n", priv->ab_enable[count->id]);
}
@@ -1092,7 +578,7 @@ static ssize_t quad8_count_enable_read(struct counter_device *counter,
static ssize_t quad8_count_enable_write(struct counter_device *counter,
struct counter_count *count, void *private, const char *buf, size_t len)
{
- struct quad8_iio *const priv = counter->priv;
+ struct quad8 *const priv = counter->priv;
const int base_offset = priv->base + 2 * count->id;
int err;
bool ab_enable;
@@ -1116,10 +602,15 @@ static ssize_t quad8_count_enable_write(struct counter_device *counter,
return len;
}

+static const char *const quad8_noise_error_states[] = {
+ "No excessive noise is present at the count inputs",
+ "Excessive noise is present at the count inputs"
+};
+
static int quad8_error_noise_get(struct counter_device *counter,
struct counter_count *count, size_t *noise_error)
{
- const struct quad8_iio *const priv = counter->priv;
+ const struct quad8 *const priv = counter->priv;
const int base_offset = priv->base + 2 * count->id + 1;

*noise_error = !!(inb(base_offset) & QUAD8_FLAG_E);
@@ -1136,18 +627,18 @@ static struct counter_count_enum_ext quad8_error_noise_enum = {
static ssize_t quad8_count_preset_read(struct counter_device *counter,
struct counter_count *count, void *private, char *buf)
{
- const struct quad8_iio *const priv = counter->priv;
+ const struct quad8 *const priv = counter->priv;

return sprintf(buf, "%u\n", priv->preset[count->id]);
}

-static void quad8_preset_register_set(struct quad8_iio *quad8iio, int id,
- unsigned int preset)
+static void quad8_preset_register_set(struct quad8 *priv, int id,
+ unsigned int preset)
{
- const unsigned int base_offset = quad8iio->base + 2 * id;
+ const unsigned int base_offset = priv->base + 2 * id;
int i;

- quad8iio->preset[id] = preset;
+ priv->preset[id] = preset;

/* Reset Byte Pointer */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
@@ -1160,7 +651,7 @@ static void quad8_preset_register_set(struct quad8_iio *quad8iio, int id,
static ssize_t quad8_count_preset_write(struct counter_device *counter,
struct counter_count *count, void *private, const char *buf, size_t len)
{
- struct quad8_iio *const priv = counter->priv;
+ struct quad8 *const priv = counter->priv;
unsigned int preset;
int ret;

@@ -1184,7 +675,7 @@ static ssize_t quad8_count_preset_write(struct counter_device *counter,
static ssize_t quad8_count_ceiling_read(struct counter_device *counter,
struct counter_count *count, void *private, char *buf)
{
- struct quad8_iio *const priv = counter->priv;
+ struct quad8 *const priv = counter->priv;

mutex_lock(&priv->lock);

@@ -1205,7 +696,7 @@ static ssize_t quad8_count_ceiling_read(struct counter_device *counter,
static ssize_t quad8_count_ceiling_write(struct counter_device *counter,
struct counter_count *count, void *private, const char *buf, size_t len)
{
- struct quad8_iio *const priv = counter->priv;
+ struct quad8 *const priv = counter->priv;
unsigned int ceiling;
int ret;

@@ -1235,7 +726,7 @@ static ssize_t quad8_count_ceiling_write(struct counter_device *counter,
static ssize_t quad8_count_preset_enable_read(struct counter_device *counter,
struct counter_count *count, void *private, char *buf)
{
- const struct quad8_iio *const priv = counter->priv;
+ const struct quad8 *const priv = counter->priv;

return sprintf(buf, "%u\n", !priv->preset_enable[count->id]);
}
@@ -1243,7 +734,7 @@ static ssize_t quad8_count_preset_enable_read(struct counter_device *counter,
static ssize_t quad8_count_preset_enable_write(struct counter_device *counter,
struct counter_count *count, void *private, const char *buf, size_t len)
{
- struct quad8_iio *const priv = counter->priv;
+ struct quad8 *const priv = counter->priv;
const int base_offset = priv->base + 2 * count->id + 1;
bool preset_enable;
int ret;
@@ -1274,7 +765,7 @@ static ssize_t quad8_signal_cable_fault_read(struct counter_device *counter,
struct counter_signal *signal,
void *private, char *buf)
{
- struct quad8_iio *const priv = counter->priv;
+ struct quad8 *const priv = counter->priv;
const size_t channel_id = signal->id / 2;
bool disabled;
unsigned int status;
@@ -1304,7 +795,7 @@ static ssize_t quad8_signal_cable_fault_enable_read(
struct counter_device *counter, struct counter_signal *signal,
void *private, char *buf)
{
- const struct quad8_iio *const priv = counter->priv;
+ const struct quad8 *const priv = counter->priv;
const size_t channel_id = signal->id / 2;
const unsigned int enb = !!(priv->cable_fault_enable & BIT(channel_id));

@@ -1315,7 +806,7 @@ static ssize_t quad8_signal_cable_fault_enable_write(
struct counter_device *counter, struct counter_signal *signal,
void *private, const char *buf, size_t len)
{
- struct quad8_iio *const priv = counter->priv;
+ struct quad8 *const priv = counter->priv;
const size_t channel_id = signal->id / 2;
bool enable;
int ret;
@@ -1345,7 +836,7 @@ static ssize_t quad8_signal_cable_fault_enable_write(
static ssize_t quad8_signal_fck_prescaler_read(struct counter_device *counter,
struct counter_signal *signal, void *private, char *buf)
{
- const struct quad8_iio *const priv = counter->priv;
+ const struct quad8 *const priv = counter->priv;
const size_t channel_id = signal->id / 2;

return sprintf(buf, "%u\n", priv->fck_prescaler[channel_id]);
@@ -1355,7 +846,7 @@ static ssize_t quad8_signal_fck_prescaler_write(struct counter_device *counter,
struct counter_signal *signal, void *private, const char *buf,
size_t len)
{
- struct quad8_iio *const priv = counter->priv;
+ struct quad8 *const priv = counter->priv;
const size_t channel_id = signal->id / 2;
const int base_offset = priv->base + 2 * channel_id;
u8 prescaler;
@@ -1531,8 +1022,7 @@ static struct counter_count quad8_counts[] = {

static int quad8_probe(struct device *dev, unsigned int id)
{
- struct iio_dev *indio_dev;
- struct quad8_iio *quad8iio;
+ struct quad8 *priv;
int i, j;
unsigned int base_offset;
int err;
@@ -1543,32 +1033,23 @@ static int quad8_probe(struct device *dev, unsigned int id)
return -EBUSY;
}

- /* Allocate IIO device; this also allocates driver data structure */
- indio_dev = devm_iio_device_alloc(dev, sizeof(*quad8iio));
- if (!indio_dev)
+ priv = devm_kzalloc(dev, sizeof(*priv));
+ if (!priv)
return -ENOMEM;

- /* Initialize IIO device */
- indio_dev->info = &quad8_info;
- indio_dev->modes = INDIO_DIRECT_MODE;
- indio_dev->num_channels = ARRAY_SIZE(quad8_channels);
- indio_dev->channels = quad8_channels;
- indio_dev->name = dev_name(dev);
-
/* Initialize Counter device and driver data */
- quad8iio = iio_priv(indio_dev);
- quad8iio->counter.name = dev_name(dev);
- quad8iio->counter.parent = dev;
- quad8iio->counter.ops = &quad8_ops;
- quad8iio->counter.counts = quad8_counts;
- quad8iio->counter.num_counts = ARRAY_SIZE(quad8_counts);
- quad8iio->counter.signals = quad8_signals;
- quad8iio->counter.num_signals = ARRAY_SIZE(quad8_signals);
- quad8iio->counter.priv = quad8iio;
- quad8iio->base = base[id];
+ priv->counter.name = dev_name(dev);
+ priv->counter.parent = dev;
+ priv->counter.ops = &quad8_ops;
+ priv->counter.counts = quad8_counts;
+ priv->counter.num_counts = ARRAY_SIZE(quad8_counts);
+ priv->counter.signals = quad8_signals;
+ priv->counter.num_signals = ARRAY_SIZE(quad8_signals);
+ priv->counter.priv = priv;
+ priv->base = base[id];

/* Initialize mutex */
- mutex_init(&quad8iio->lock);
+ mutex_init(&priv->lock);

/* Reset all counters and disable interrupt function */
outb(QUAD8_CHAN_OP_RESET_COUNTERS, base[id] + QUAD8_REG_CHAN_OP);
@@ -1602,13 +1083,8 @@ static int quad8_probe(struct device *dev, unsigned int id)
/* Enable all counters */
outb(QUAD8_CHAN_OP_ENABLE_COUNTERS, base[id] + QUAD8_REG_CHAN_OP);

- /* Register IIO device */
- err = devm_iio_device_register(dev, indio_dev);
- if (err)
- return err;
-
/* Register Counter device */
- return devm_counter_register(dev, &quad8iio->counter);
+ return devm_counter_register(dev, &priv->counter);
}

static struct isa_driver quad8_driver = {
@@ -1621,5 +1097,5 @@ static struct isa_driver quad8_driver = {
module_isa_driver(quad8_driver, num_quad8);

MODULE_AUTHOR("William Breathitt Gray <[email protected]>");
-MODULE_DESCRIPTION("ACCES 104-QUAD-8 IIO driver");
+MODULE_DESCRIPTION("ACCES 104-QUAD-8 driver");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/counter/Kconfig b/drivers/counter/Kconfig
index 2de53ab0dd25..63ffbebcf455 100644
--- a/drivers/counter/Kconfig
+++ b/drivers/counter/Kconfig
@@ -14,7 +14,7 @@ if COUNTER

config 104_QUAD_8
tristate "ACCES 104-QUAD-8 driver"
- depends on PC104 && X86 && IIO
+ depends on PC104 && X86
select ISA_BUS_API
help
Say yes here to build support for the ACCES 104-QUAD-8 quadrature
--
2.30.0

2021-01-24 07:47:52

by William Breathitt Gray

[permalink] [raw]
Subject: [PATCH 2/2] iio: Remove the IIO counter ABI documentation

The IIO counter driver has been superseded by the Counter subsystem as
discussed in [1]. This patch removes the IIO counter ABI documentation.

[1] https://lore.kernel.org/lkml/[email protected]/

Cc: Fabrice Gasnier <[email protected]>
Cc: Benjamin Gaignard <[email protected]>
Signed-off-by: William Breathitt Gray <[email protected]>
---
Documentation/ABI/testing/sysfs-bus-iio | 40 -------------------------
1 file changed, 40 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index d957f5da5c04..c207484a86d0 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -1704,46 +1704,6 @@ Description:
Raw (unscaled no offset etc.) electric conductivity reading that
can be processed to siemens per meter.

-What: /sys/bus/iio/devices/iio:deviceX/in_countY_raw
-KernelVersion: 4.10
-Contact: [email protected]
-Description:
- This interface is deprecated; please use the Counter subsystem.
-
- Raw counter device counts from channel Y. For quadrature
- counters, multiplication by an available [Y]_scale results in
- the counts of a single quadrature signal phase from channel Y.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_indexY_raw
-KernelVersion: 4.10
-Contact: [email protected]
-Description:
- This interface is deprecated; please use the Counter subsystem.
-
- Raw counter device index value from channel Y. This attribute
- provides an absolute positional reference (e.g. a pulse once per
- revolution) which may be used to home positional systems as
- required.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_count_count_direction_available
-KernelVersion: 4.12
-Contact: [email protected]
-Description:
- This interface is deprecated; please use the Counter subsystem.
-
- A list of possible counting directions which are:
-
- - "up" : counter device is increasing.
- - "down": counter device is decreasing.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_countY_count_direction
-KernelVersion: 4.12
-Contact: [email protected]
-Description:
- This interface is deprecated; please use the Counter subsystem.
-
- Raw counter device counters direction for channel Y.
-
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_label
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_label
KernelVersion: 5.8
--
2.30.0

2021-01-24 15:00:07

by Jonathan Cameron

[permalink] [raw]
Subject: Re: [PATCH 0/2] Remove the IIO counter ABI

On Sun, 24 Jan 2021 16:42:22 +0900
William Breathitt Gray <[email protected]> wrote:

> The IIO counter driver has been superseded by the Counter subsystem as
> discussed in [1]. This patchset removes the IIO counter ABI code and
> documentation.
>
> [1] https://lore.kernel.org/lkml/[email protected]/

I'm happy to see this go in general, but would like it to sit on the list for
a little while just in case anyone has a different opinion.

The ABI has been marked as deprecated for a while, but who knows if users
noticed that. Fingers crossed no one notices us removing it.

It think it would also be good to note we still have one user of this ABI
in iio/triggers/stm32-timer-trigger.c
Hence we may want to introduce specific docs for that one case or try
to figure out a clean way to get rid of it...

Jonathan

>
> William Breathitt Gray (2):
> counter: 104-quad-8: Remove IIO counter ABI
> iio: Remove the IIO counter ABI documentation
>
> Documentation/ABI/testing/sysfs-bus-iio | 40 --
> .../testing/sysfs-bus-iio-counter-104-quad-8 | 133 ----
> MAINTAINERS | 1 -
> drivers/counter/104-quad-8.c | 652 ++----------------
> drivers/counter/Kconfig | 2 +-
> 5 files changed, 65 insertions(+), 763 deletions(-)
> delete mode 100644 Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8
>

2021-01-27 22:02:11

by kernel test robot

[permalink] [raw]
Subject: Re: [PATCH 1/2] counter: 104-quad-8: Remove IIO counter ABI

Hi William,

I love your patch! Yet something to improve:

[auto build test ERROR on iio/togreg]
[also build test ERROR on linux/master linus/master v5.11-rc5 next-20210125]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url: https://github.com/0day-ci/linux/commits/William-Breathitt-Gray/Remove-the-IIO-counter-ABI/20210125-210945
base: https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git togreg
config: x86_64-randconfig-a003-20210126 (attached as .config)
compiler: clang version 12.0.0 (https://github.com/llvm/llvm-project 925ae8c790c7e354f12ec14a6cac6aa49fc75b29)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# install x86_64 cross compiling tool for clang build
# apt-get install binutils-x86-64-linux-gnu
# https://github.com/0day-ci/linux/commit/93b6ce4252570c170c0a65a5d2ba200a5cb07967
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review William-Breathitt-Gray/Remove-the-IIO-counter-ABI/20210125-210945
git checkout 93b6ce4252570c170c0a65a5d2ba200a5cb07967
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=x86_64

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <[email protected]>

All errors (new ones prefixed by >>):

>> drivers/counter/104-quad-8.c:1036:40: error: too few arguments to function call, expected 3, have 2
priv = devm_kzalloc(dev, sizeof(*priv));
~~~~~~~~~~~~ ^
include/linux/device.h:215:21: note: 'devm_kzalloc' declared here
static inline void *devm_kzalloc(struct device *dev, size_t size, gfp_t gfp)
^
1 error generated.


vim +1036 drivers/counter/104-quad-8.c

1022
1023 static int quad8_probe(struct device *dev, unsigned int id)
1024 {
1025 struct quad8 *priv;
1026 int i, j;
1027 unsigned int base_offset;
1028 int err;
1029
1030 if (!devm_request_region(dev, base[id], QUAD8_EXTENT, dev_name(dev))) {
1031 dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
1032 base[id], base[id] + QUAD8_EXTENT);
1033 return -EBUSY;
1034 }
1035
> 1036 priv = devm_kzalloc(dev, sizeof(*priv));
1037 if (!priv)
1038 return -ENOMEM;
1039
1040 /* Initialize Counter device and driver data */
1041 priv->counter.name = dev_name(dev);
1042 priv->counter.parent = dev;
1043 priv->counter.ops = &quad8_ops;
1044 priv->counter.counts = quad8_counts;
1045 priv->counter.num_counts = ARRAY_SIZE(quad8_counts);
1046 priv->counter.signals = quad8_signals;
1047 priv->counter.num_signals = ARRAY_SIZE(quad8_signals);
1048 priv->counter.priv = priv;
1049 priv->base = base[id];
1050
1051 /* Initialize mutex */
1052 mutex_init(&priv->lock);
1053
1054 /* Reset all counters and disable interrupt function */
1055 outb(QUAD8_CHAN_OP_RESET_COUNTERS, base[id] + QUAD8_REG_CHAN_OP);
1056 /* Set initial configuration for all counters */
1057 for (i = 0; i < QUAD8_NUM_COUNTERS; i++) {
1058 base_offset = base[id] + 2 * i;
1059 /* Reset Byte Pointer */
1060 outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
1061 /* Reset filter clock factor */
1062 outb(0, base_offset);
1063 outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_PRESET_PSC,
1064 base_offset + 1);
1065 /* Reset Byte Pointer */
1066 outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
1067 /* Reset Preset Register */
1068 for (j = 0; j < 3; j++)
1069 outb(0x00, base_offset);
1070 /* Reset Borrow, Carry, Compare, and Sign flags */
1071 outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_FLAGS, base_offset + 1);
1072 /* Reset Error flag */
1073 outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_E, base_offset + 1);
1074 /* Binary encoding; Normal count; non-quadrature mode */
1075 outb(QUAD8_CTR_CMR, base_offset + 1);
1076 /* Disable A and B inputs; preset on index; FLG1 as Carry */
1077 outb(QUAD8_CTR_IOR, base_offset + 1);
1078 /* Disable index function; negative index polarity */
1079 outb(QUAD8_CTR_IDR, base_offset + 1);
1080 }
1081 /* Disable Differential Encoder Cable Status for all channels */
1082 outb(0xFF, base[id] + QUAD8_DIFF_ENCODER_CABLE_STATUS);
1083 /* Enable all counters */
1084 outb(QUAD8_CHAN_OP_ENABLE_COUNTERS, base[id] + QUAD8_REG_CHAN_OP);
1085
1086 /* Register Counter device */
1087 return devm_counter_register(dev, &priv->counter);
1088 }
1089

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/[email protected]


Attachments:
(No filename) (4.97 kB)
.config.gz (40.87 kB)
Download all attachments