This patch series adds a new driver called xData-pcie for the Synopsys
DesignWare PCIe prototype.
The driver configures and enables the Synopsys DesignWare PCIe traffic
generator IP inside of prototype Endpoint which will generate upstream
and downstream PCIe traffic. This allows to quickly test the PCIe link
throughput speed and check is the prototype solution has some limitation
or not.
Changes:
V2: Rework driver according to Greg Kroah-Hartman feedback
V3: Fixed issues detected while running on 64 bits platforms
Rebased patches on top of v5.11-rc1 version
Cc: Derek Kiernan <[email protected]>
Cc: Dragan Cvetic <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Gustavo Pimentel (5):
misc: Add Synopsys DesignWare xData IP driver
misc: Add Synopsys DesignWare xData IP driver to Makefile
misc: Add Synopsys DesignWare xData IP driver to Kconfig
Documentation: misc-devices: Add Documentation for dw-xdata-pcie
driver
MAINTAINERS: Add Synopsys xData IP driver maintainer
Documentation/misc-devices/dw-xdata-pcie.rst | 40 +++
MAINTAINERS | 7 +
drivers/misc/Kconfig | 11 +
drivers/misc/Makefile | 1 +
drivers/misc/dw-xdata-pcie.c | 379 +++++++++++++++++++++++++++
5 files changed, 438 insertions(+)
create mode 100644 Documentation/misc-devices/dw-xdata-pcie.rst
create mode 100644 drivers/misc/dw-xdata-pcie.c
--
2.7.4