There are still a couple of things that are aiming firmware versions newer
or different than Intel Aero firmware:
https://github.com/intel-aero/meta-intel-aero-base/blob/master/recipes-kernel/linux/linux-yocto/shisp_2401a0_v21.bin
As the code should be in sync with the firmware, change the remaining
code to be compatible with the firmware.
After this series, except if some mistakes were made, the atomisp code
is now in sync with the Aero firmware.
Mauro Carvalho Chehab (8):
media: atomisp: atomisp_cmd: make it more compatible with firmware
media: atomisp: get rid of set pipe version custom ctrl
media: atomisp: simplify binary.c
media: atomisp: binary.c: drop logic incompatible with firmware
media: atomisp: pipe_binarydesc: drop logic incompatible with firmware
media: atomisp: frame.c: drop a now-unused function
media: atomisp: add YUVPP at __atomisp_get_pipe() logic
media: atomisp: cleanup qbuf logic
.../staging/media/atomisp/pci/atomisp_cmd.c | 20 +-
.../media/atomisp/pci/atomisp_compat_css20.c | 9 -
.../staging/media/atomisp/pci/atomisp_ioctl.c | 19 -
.../media/atomisp/pci/atomisp_subdev.c | 23 -
.../media/atomisp/pci/atomisp_subdev.h | 1 -
.../pci/camera/pipe/src/pipe_binarydesc.c | 18 +-
.../atomisp/pci/runtime/binary/src/binary.c | 489 +-----------------
.../runtime/frame/interface/ia_css_frame.h | 19 -
.../atomisp/pci/runtime/frame/src/frame.c | 70 ---
9 files changed, 27 insertions(+), 641 deletions(-)
--
2.33.1
The logic there is meant to be used by newer firmwares.
clean it up, in order to make compatible with the chosen
firmware version.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover.
See [PATCH 0/8] at: https://lore.kernel.org/all/[email protected]/
.../staging/media/atomisp/pci/atomisp_ioctl.c | 19 -------------------
1 file changed, 19 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
index b2d3b8349234..562789c75299 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
@@ -1457,25 +1457,8 @@ static int atomisp_qbuf(struct file *file, void *fh, struct v4l2_buffer *buf)
pipe->capq.streaming &&
!asd->enable_raw_buffer_lock->val &&
asd->params.offline_parm.num_captures == 1) {
- if (!IS_ISP2401) {
asd->pending_capture_request++;
dev_dbg(isp->dev, "Add one pending capture request.\n");
- } else {
- if (asd->re_trigger_capture) {
- ret = atomisp_css_offline_capture_configure(asd,
- asd->params.offline_parm.num_captures,
- asd->params.offline_parm.skip_frames,
- asd->params.offline_parm.offset);
- asd->re_trigger_capture = false;
- dev_dbg(isp->dev, "%s Trigger capture again ret=%d\n",
- __func__, ret);
-
- } else {
- asd->pending_capture_request++;
- asd->re_trigger_capture = false;
- dev_dbg(isp->dev, "Add one pending capture request.\n");
- }
- }
}
rt_mutex_unlock(&isp->mutex);
@@ -1868,8 +1851,6 @@ static int atomisp_streamon(struct file *file, void *fh,
/* Reset pending capture request count. */
asd->pending_capture_request = 0;
- if (IS_ISP2401)
- asd->re_trigger_capture = false;
if ((atomisp_subdev_streaming_count(asd) > sensor_start_stream) &&
(!isp->inputs[asd->input_curr].camera_caps->multi_stream_ctrl)) {
--
2.33.1
Aligns it which the Intel Aero firmware.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover.
See [PATCH 0/8] at: https://lore.kernel.org/all/[email protected]/
drivers/staging/media/atomisp/pci/atomisp_cmd.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_cmd.c b/drivers/staging/media/atomisp/pci/atomisp_cmd.c
index 86dad9fe61bf..5a90cc31cd1a 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_cmd.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_cmd.c
@@ -857,7 +857,8 @@ static struct atomisp_video_pipe *__atomisp_get_pipe(
} else if (asd->run_mode->val == ATOMISP_RUN_MODE_VIDEO) {
/* For online video or SDV video pipe. */
if (css_pipe_id == IA_CSS_PIPE_ID_VIDEO ||
- css_pipe_id == IA_CSS_PIPE_ID_COPY) {
+ css_pipe_id == IA_CSS_PIPE_ID_COPY ||
+ css_pipe_id == IA_CSS_PIPE_ID_YUVPP) {
if (buf_type == IA_CSS_BUFFER_TYPE_OUTPUT_FRAME)
return &asd->video_out_video_capture;
return &asd->video_out_preview;
@@ -865,7 +866,8 @@ static struct atomisp_video_pipe *__atomisp_get_pipe(
} else if (asd->run_mode->val == ATOMISP_RUN_MODE_PREVIEW) {
/* For online preview or ZSL preview pipe. */
if (css_pipe_id == IA_CSS_PIPE_ID_PREVIEW ||
- css_pipe_id == IA_CSS_PIPE_ID_COPY)
+ css_pipe_id == IA_CSS_PIPE_ID_COPY ||
+ css_pipe_id == IA_CSS_PIPE_ID_YUVPP)
return &asd->video_out_preview;
}
/* For capture pipe. */
--
2.33.1
Change some recovery logic at the driver, in order to make it
more compatible with ISP2401 Intel Aero firmware.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover.
See [PATCH 0/8] at: https://lore.kernel.org/all/[email protected]/
drivers/staging/media/atomisp/pci/atomisp_cmd.c | 14 ++------------
1 file changed, 2 insertions(+), 12 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_cmd.c b/drivers/staging/media/atomisp/pci/atomisp_cmd.c
index 7181b901cde4..86dad9fe61bf 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_cmd.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_cmd.c
@@ -1046,13 +1046,8 @@ void atomisp_buf_done(struct atomisp_sub_device *asd, int error,
asd->pending_capture_request--;
- if (IS_ISP2401)
- asd->re_trigger_capture = false;
-
dev_dbg(isp->dev, "Trigger capture again for new buffer. err=%d\n",
err);
- } else if (IS_ISP2401) {
- asd->re_trigger_capture = true;
}
break;
case IA_CSS_BUFFER_TYPE_OUTPUT_FRAME:
@@ -1474,7 +1469,7 @@ void atomisp_wdt_work(struct work_struct *work)
wdt_work);
int i;
unsigned int pipe_wdt_cnt[MAX_STREAM_NUM][4] = { {0} };
- bool css_recover = false;
+ bool css_recover = true;
rt_mutex_lock(&isp->mutex);
if (!atomisp_streaming_count(isp)) {
@@ -1487,12 +1482,7 @@ void atomisp_wdt_work(struct work_struct *work)
dev_err(isp->dev, "timeout %d of %d\n",
atomic_read(&isp->wdt_count) + 1,
ATOMISP_ISP_MAX_TIMEOUT_COUNT);
-
- if (atomic_inc_return(&isp->wdt_count) < ATOMISP_ISP_MAX_TIMEOUT_COUNT)
- css_recover = true;
} else {
- css_recover = true;
-
for (i = 0; i < isp->num_of_streams; i++) {
struct atomisp_sub_device *asd = &isp->asd[i];
@@ -6003,7 +5993,7 @@ int atomisp_set_fmt(struct video_device *vdev, struct v4l2_format *f)
* which appears to be related by a hardware
* performance limitation. It's unclear why this
* particular code triggers the issue. */
- if (!IS_ISP2401 || crop_needs_override) {
+ if (crop_needs_override) {
if (isp_sink_crop.width * main_compose.height >
isp_sink_crop.height * main_compose.width) {
sink_crop.height = isp_sink_crop.height;
--
2.33.1
ia_css_frame_find_crop_resolution() is not used anymore.
So, remove it.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover.
See [PATCH 0/8] at: https://lore.kernel.org/all/[email protected]/
.../runtime/frame/interface/ia_css_frame.h | 19 -----
.../atomisp/pci/runtime/frame/src/frame.c | 70 -------------------
2 files changed, 89 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/runtime/frame/interface/ia_css_frame.h b/drivers/staging/media/atomisp/pci/runtime/frame/interface/ia_css_frame.h
index 51ec7073d860..c756a134efc3 100644
--- a/drivers/staging/media/atomisp/pci/runtime/frame/interface/ia_css_frame.h
+++ b/drivers/staging/media/atomisp/pci/runtime/frame/interface/ia_css_frame.h
@@ -141,23 +141,4 @@ bool ia_css_frame_is_same_type(
int ia_css_dma_configure_from_info(struct dma_port_config *config,
const struct ia_css_frame_info *info);
-/* ISP2401 */
-/* @brief Finds the cropping resolution
- * This function finds the maximum cropping resolution in an input image keeping
- * the aspect ratio for the given output resolution.Calculates the coordinates
- * for cropping from the center and returns the starting pixel location of the
- * region in the input image. Also returns the dimension of the cropping
- * resolution.
- *
- * @param
- * @param[in] in_res Resolution of input image
- * @param[in] out_res Resolution of output image
- * @param[out] crop_res Crop resolution of input image
- * @return Returns 0 or -EINVAL on error
- */
-int
-ia_css_frame_find_crop_resolution(const struct ia_css_resolution *in_res,
- const struct ia_css_resolution *out_res,
- struct ia_css_resolution *crop_res);
-
#endif /* __IA_CSS_FRAME_H__ */
diff --git a/drivers/staging/media/atomisp/pci/runtime/frame/src/frame.c b/drivers/staging/media/atomisp/pci/runtime/frame/src/frame.c
index e3242652f296..a3aae638b0bf 100644
--- a/drivers/staging/media/atomisp/pci/runtime/frame/src/frame.c
+++ b/drivers/staging/media/atomisp/pci/runtime/frame/src/frame.c
@@ -933,73 +933,3 @@ void ia_css_resolution_to_sp_resolution(
to->width = (uint16_t)from->width;
to->height = (uint16_t)from->height;
}
-
-/* ISP2401 */
-int
-ia_css_frame_find_crop_resolution(const struct ia_css_resolution *in_res,
- const struct ia_css_resolution *out_res,
- struct ia_css_resolution *crop_res) {
- u32 wd_even_ceil, ht_even_ceil;
- u32 in_ratio, out_ratio;
-
- if ((!in_res) || (!out_res) || (!crop_res))
- return -EINVAL;
-
- IA_CSS_ENTER_PRIVATE("in(%ux%u) -> out(%ux%u)", in_res->width,
- in_res->height, out_res->width, out_res->height);
-
- if ((in_res->width == 0)
- || (in_res->height == 0)
- || (out_res->width == 0)
- || (out_res->height == 0))
- return -EINVAL;
-
- if ((out_res->width > in_res->width) ||
- (out_res->height > in_res->height))
- return -EINVAL;
-
- /* If aspect ratio (width/height) of out_res is higher than the aspect
- * ratio of the in_res, then we crop vertically, otherwise we crop
- * horizontally.
- */
- in_ratio = in_res->width * out_res->height;
- out_ratio = out_res->width * in_res->height;
-
- if (in_ratio == out_ratio)
- {
- crop_res->width = in_res->width;
- crop_res->height = in_res->height;
- } else if (out_ratio > in_ratio)
- {
- crop_res->width = in_res->width;
- crop_res->height = ROUND_DIV(out_res->height * crop_res->width,
- out_res->width);
- } else
- {
- crop_res->height = in_res->height;
- crop_res->width = ROUND_DIV(out_res->width * crop_res->height,
- out_res->height);
- }
-
- /* Round new (cropped) width and height to an even number.
- * binarydesc_calculate_bds_factor is such that we should consider as
- * much of the input as possible. This is different only when we end up
- * with an odd number in the last step. So, we take the next even number
- * if it falls within the input, otherwise take the previous even no.
- */
- wd_even_ceil = EVEN_CEIL(crop_res->width);
- ht_even_ceil = EVEN_CEIL(crop_res->height);
- if ((wd_even_ceil > in_res->width) || (ht_even_ceil > in_res->height))
- {
- crop_res->width = EVEN_FLOOR(crop_res->width);
- crop_res->height = EVEN_FLOOR(crop_res->height);
- } else
- {
- crop_res->width = wd_even_ceil;
- crop_res->height = ht_even_ceil;
- }
-
- IA_CSS_LEAVE_PRIVATE("in(%ux%u) -> out(%ux%u)", crop_res->width,
- crop_res->height, out_res->width, out_res->height);
- return 0;
-}
--
2.33.1
It doesn't make sense to have a control for that. Besides that,
the Intel Aero implementation doesn't have, which means that
even the custom control is not used in practice, at least
outside Android.
So, get rid of it.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover.
See [PATCH 0/8] at: https://lore.kernel.org/all/[email protected]/
.../media/atomisp/pci/atomisp_compat_css20.c | 9 --------
.../media/atomisp/pci/atomisp_subdev.c | 23 -------------------
.../media/atomisp/pci/atomisp_subdev.h | 1 -
3 files changed, 33 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c b/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c
index 7edee293b132..1173be0e72b0 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c
@@ -611,15 +611,6 @@ static void __apply_additional_pipe_config(
if (stream_env->pipe_configs[pipe_id].
default_capture_config.mode == IA_CSS_CAPTURE_MODE_RAW)
stream_env->pipe_configs[pipe_id].enable_dz = false;
-
- if (IS_ISP2401) {
- /* the isp default to use ISP2.2 and the camera hal will
- * control whether use isp2.7 */
- if (asd->select_isp_version->val == ATOMISP_CSS_ISP_PIPE_VERSION_2_7)
- stream_env->pipe_configs[pipe_id].isp_pipe_version = SH_CSS_ISP_PIPE_VERSION_2_7;
- else
- stream_env->pipe_configs[pipe_id].isp_pipe_version = SH_CSS_ISP_PIPE_VERSION_2_2;
- }
break;
case IA_CSS_PIPE_ID_VIDEO:
/* enable reduced pipe to have binary
diff --git a/drivers/staging/media/atomisp/pci/atomisp_subdev.c b/drivers/staging/media/atomisp/pci/atomisp_subdev.c
index a3f3c42f9db7..1807cfa786a7 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_subdev.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_subdev.c
@@ -1058,24 +1058,6 @@ static const struct v4l2_ctrl_config ctrl_depth_mode = {
.def = 0,
};
-/*
- * Control for selectting ISP version
- *
- * When enabled, that means ISP version will be used ISP2.7. when disable, the
- * isp will default to use ISP2.2.
- * Note: Make sure set this configuration before creating stream.
- */
-static const struct v4l2_ctrl_config ctrl_select_isp_version = {
- .ops = &ctrl_ops,
- .id = V4L2_CID_ATOMISP_SELECT_ISP_VERSION,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Select Isp version",
- .min = 0,
- .max = 1,
- .step = 1,
- .def = 0,
-};
-
static void atomisp_init_subdev_pipe(struct atomisp_sub_device *asd,
struct atomisp_video_pipe *pipe, enum v4l2_buf_type buf_type)
{
@@ -1223,11 +1205,6 @@ static int isp_subdev_init_entities(struct atomisp_sub_device *asd)
v4l2_ctrl_new_custom(&asd->ctrl_handler,
&ctrl_disable_dz,
NULL);
- if (IS_ISP2401) {
- asd->select_isp_version = v4l2_ctrl_new_custom(&asd->ctrl_handler,
- &ctrl_select_isp_version,
- NULL);
- }
/* Make controls visible on subdev as well. */
asd->subdev.ctrl_handler = &asd->ctrl_handler;
diff --git a/drivers/staging/media/atomisp/pci/atomisp_subdev.h b/drivers/staging/media/atomisp/pci/atomisp_subdev.h
index a8d210ea5f8b..7d731f1fee72 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_subdev.h
+++ b/drivers/staging/media/atomisp/pci/atomisp_subdev.h
@@ -319,7 +319,6 @@ struct atomisp_sub_device {
/* ISP2401 */
struct v4l2_ctrl *ion_dev_fd;
- struct v4l2_ctrl *select_isp_version;
struct v4l2_ctrl *disable_dz;
--
2.33.1
As we're using this firmware for ISP2401:
https://github.com/intel-aero/meta-intel-aero-base/blob/master/recipes-kernel/linux/linux-yocto/shisp_2401a0_v21.bin
Revert some changes that are not compatible with it, making
the code close to the Intel Aero one.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover.
See [PATCH 0/8] at: https://lore.kernel.org/all/[email protected]/
.../pci/camera/pipe/src/pipe_binarydesc.c | 18 ++----------------
1 file changed, 2 insertions(+), 16 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/camera/pipe/src/pipe_binarydesc.c b/drivers/staging/media/atomisp/pci/camera/pipe/src/pipe_binarydesc.c
index d09cc486e33e..7dd0e4a53c8b 100644
--- a/drivers/staging/media/atomisp/pci/camera/pipe/src/pipe_binarydesc.c
+++ b/drivers/staging/media/atomisp/pci/camera/pipe/src/pipe_binarydesc.c
@@ -601,16 +601,9 @@ void ia_css_pipe_get_primary_binarydesc(
* since it has better performance. */
if (pipe_version == IA_CSS_PIPE_VERSION_2_6_1)
prim_descr->striped = false;
- else if (!IS_ISP2401) {
+ else
prim_descr->striped = prim_descr->continuous &&
(!pipe->stream->stop_copy_preview || !pipe->stream->disable_cont_vf);
- } else {
- prim_descr->striped = prim_descr->continuous && !pipe->stream->disable_cont_vf;
-
- if ((pipe->config.default_capture_config.enable_xnr != 0) &&
- (pipe->extra_config.enable_dvs_6axis == true))
- prim_descr->enable_xnr = true;
- }
}
IA_CSS_LEAVE_PRIVATE("");
}
@@ -842,14 +835,7 @@ void ia_css_pipe_get_ldc_binarydesc(
assert(out_info);
IA_CSS_ENTER_PRIVATE("");
- if (!IS_ISP2401) {
- *in_info = *out_info;
- } else {
- if (pipe->out_yuv_ds_input_info.res.width)
- *in_info = pipe->out_yuv_ds_input_info;
- else
- *in_info = *out_info;
- }
+ *in_info = *out_info;
in_info->format = IA_CSS_FRAME_FORMAT_YUV420;
in_info->raw_bit_depth = 0;
--
2.33.1
As we're using this firmware for ISP2401:
https://github.com/intel-aero/meta-intel-aero-base/blob/master/recipes-kernel/linux/linux-yocto/shisp_2401a0_v21.bin
It makes no sense to try to select a non-existing binary
inside the firmware. So, revert it to reflect the Intel Aero
device driver.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover.
See [PATCH 0/8] at: https://lore.kernel.org/all/[email protected]/
.../atomisp/pci/runtime/binary/src/binary.c | 76 +++----------------
1 file changed, 9 insertions(+), 67 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c b/drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c
index 5e435bec942b..406ed5fb4c6a 100644
--- a/drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c
+++ b/drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c
@@ -108,7 +108,6 @@ ia_css_binary_internal_res(const struct ia_css_frame_info *in_info,
binary_dvs_env.height);
}
-/* ISP2400 */
/* Computation results of the origin coordinate of bayer on the shading table. */
struct sh_css_shading_table_bayer_origin_compute_results {
u32 bayer_scale_hor_ratio_in; /* Horizontal ratio (in) of bayer scaling. */
@@ -119,23 +118,7 @@ struct sh_css_shading_table_bayer_origin_compute_results {
u32 sc_bayer_origin_y_bqs_on_shading_table; /* Y coordinate (in bqs) of bayer origin on shading table. */
};
-/* ISP2401 */
-/* Requirements for the shading correction. */
-struct sh_css_binary_sc_requirements {
- /* Bayer scaling factor, for the scaling which is applied before shading correction. */
- u32 bayer_scale_hor_ratio_in; /* Horizontal ratio (in) of scaling applied BEFORE shading correction. */
- u32 bayer_scale_hor_ratio_out; /* Horizontal ratio (out) of scaling applied BEFORE shading correction. */
- u32 bayer_scale_ver_ratio_in; /* Vertical ratio (in) of scaling applied BEFORE shading correction. */
- u32 bayer_scale_ver_ratio_out; /* Vertical ratio (out) of scaling applied BEFORE shading correction. */
-
- /* ISP internal frame is composed of the real sensor data and the padding data. */
- u32 sensor_data_origin_x_bqs_on_internal; /* X origin (in bqs) of sensor data on internal frame
- at shading correction. */
- u32 sensor_data_origin_y_bqs_on_internal; /* Y origin (in bqs) of sensor data on internal frame
- at shading correction. */
-};
-
-/* ISP2400: Get the requirements for the shading correction. */
+/* Get the requirements for the shading correction. */
static int
ia_css_binary_compute_shading_table_bayer_origin(
const struct ia_css_binary *binary, /* [in] */
@@ -568,15 +551,9 @@ binary_grid_deci_factor_log2(int width, int height)
/* 3A/Shading decimation factor spcification (at August 2008)
* ------------------------------------------------------------------
* [Image Width (BQ)] [Decimation Factor (BQ)] [Resulting grid cells]
- #ifndef ISP2401
* 1280 ?c 32 40 ?c
* 640 ?c 1279 16 40 ?c 80
* ?c 639 8 ?c 80
- #else
- * from 1280 32 from 40
- * from 640 to 1279 16 from 40 to 80
- * to 639 8 to 80
- #endif
* ------------------------------------------------------------------
*/
/* Maximum and minimum decimation factor by the specification */
@@ -938,15 +915,9 @@ ia_css_binary_fill_info(const struct ia_css_binary_xinfo *xinfo,
if (info->enable.sc)
{
- if (!IS_ISP2401) {
- binary->sctbl_width_per_color = _ISP_SCTBL_WIDTH_PER_COLOR(sc_3a_dis_padded_width, s3a_log_deci);
- binary->sctbl_aligned_width_per_color = SH_CSS_MAX_SCTBL_ALIGNED_WIDTH_PER_COLOR;
- binary->sctbl_height = _ISP_SCTBL_HEIGHT(sc_3a_dis_height, s3a_log_deci);
- } else {
- binary->sctbl_width_per_color = _ISP2401_SCTBL_WIDTH_PER_COLOR(isp_internal_width, s3a_log_deci);
- binary->sctbl_aligned_width_per_color = SH_CSS_MAX_SCTBL_ALIGNED_WIDTH_PER_COLOR;
- binary->sctbl_height = _ISP2401_SCTBL_HEIGHT(isp_internal_height, s3a_log_deci);
- }
+ binary->sctbl_width_per_color = _ISP_SCTBL_WIDTH_PER_COLOR(sc_3a_dis_padded_width, s3a_log_deci);
+ binary->sctbl_aligned_width_per_color = SH_CSS_MAX_SCTBL_ALIGNED_WIDTH_PER_COLOR;
+ binary->sctbl_height = _ISP_SCTBL_HEIGHT(sc_3a_dis_height, s3a_log_deci);
} else
{
binary->sctbl_width_per_color = 0;
@@ -980,11 +951,7 @@ static int __ia_css_binary_find(struct ia_css_binary_descr *descr,
*req_vf_info;
struct ia_css_binary_xinfo *xcandidate;
-#ifndef ISP2401
bool need_ds, need_dz, need_dvs, need_xnr, need_dpc;
-#else
- bool need_ds, need_dz, need_dvs, need_xnr, need_dpc, need_tnr;
-#endif
bool striped;
bool enable_yuv_ds;
bool enable_high_speed;
@@ -1012,33 +979,21 @@ static int __ia_css_binary_find(struct ia_css_binary_descr *descr,
stream_format = descr->stream_format;
req_in_info = descr->in_info;
req_bds_out_info = descr->bds_out_info;
- for (i = 0; i < IA_CSS_BINARY_MAX_OUTPUT_PORTS; i++)
- {
+ for (i = 0; i < IA_CSS_BINARY_MAX_OUTPUT_PORTS; i++) {
req_out_info[i] = descr->out_info[i];
if (req_out_info[i] && (req_out_info[i]->res.width != 0))
req_bin_out_info = req_out_info[i];
}
if (!req_bin_out_info)
return -EINVAL;
-#ifndef ISP2401
req_vf_info = descr->vf_info;
-#else
-
- if ((descr->vf_info) && (descr->vf_info->res.width == 0))
- /* width==0 means that there is no vf pin (e.g. in SkyCam preview case) */
- req_vf_info = NULL;
- else
- req_vf_info = descr->vf_info;
-#endif
need_xnr = descr->enable_xnr;
need_ds = descr->enable_fractional_ds;
need_dz = false;
need_dvs = false;
need_dpc = descr->enable_dpc;
-#ifdef ISP2401
- need_tnr = descr->enable_tnr;
-#endif
+
enable_yuv_ds = descr->enable_yuv_ds;
enable_high_speed = descr->enable_high_speed;
enable_dvs_6axis = descr->enable_dvs_6axis;
@@ -1053,8 +1008,7 @@ static int __ia_css_binary_find(struct ia_css_binary_descr *descr,
internal_res.width = 0;
internal_res.height = 0;
- if (mode == IA_CSS_BINARY_MODE_VIDEO)
- {
+ if (mode == IA_CSS_BINARY_MODE_VIDEO) {
dvs_env = descr->dvs_env;
need_dz = descr->enable_dz;
/* Video is the only mode that has a nodz variant. */
@@ -1063,8 +1017,7 @@ static int __ia_css_binary_find(struct ia_css_binary_descr *descr,
/* print a map of the binary file */
ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE, "BINARY INFO:\n");
- for (i = 0; i < IA_CSS_BINARY_NUM_MODES; i++)
- {
+ for (i = 0; i < IA_CSS_BINARY_NUM_MODES; i++) {
xcandidate = binary_infos[i];
if (xcandidate) {
ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE, "%d:\n", i);
@@ -1079,8 +1032,7 @@ static int __ia_css_binary_find(struct ia_css_binary_descr *descr,
/* printf("sh_css_binary_find: pipe version %d\n", isp_pipe_version); */
for (xcandidate = binary_infos[mode]; xcandidate;
- xcandidate = xcandidate->next)
- {
+ xcandidate = xcandidate->next) {
struct ia_css_binary_info *candidate = &xcandidate->sp;
/* printf("sh_css_binary_find: evaluating candidate:
* %d\n",candidate->id); */
@@ -1338,16 +1290,6 @@ static int __ia_css_binary_find(struct ia_css_binary_descr *descr,
continue;
}
-#ifdef ISP2401
- if (!candidate->enable.tnr && need_tnr) {
- ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE,
- "ia_css_binary_find() [%d] continue: !%d && %d\n",
- __LINE__, candidate->enable.tnr,
- descr->enable_tnr);
- continue;
- }
-
-#endif
/* reconfigure any variable properties of the binary */
err = ia_css_binary_fill_info(xcandidate, online, two_ppc,
stream_format, req_in_info,
--
2.33.1
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover.
See [PATCH 0/8] at: https://lore.kernel.org/all/[email protected]/
.../atomisp/pci/runtime/binary/src/binary.c | 413 +-----------------
1 file changed, 10 insertions(+), 403 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c b/drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c
index 9af23fdb127b..5e435bec942b 100644
--- a/drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c
+++ b/drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c
@@ -261,227 +261,12 @@ ia_css_binary_compute_shading_table_bayer_origin(
return err;
}
-/* ISP2401: Get the requirements for the shading correction. */
-static int
-sh_css_binary_get_sc_requirements(const struct ia_css_binary *binary, /* [in] */
- unsigned int required_bds_factor, /* [in] */
- const struct ia_css_stream_config *stream_config, /* [in] */
- struct sh_css_binary_sc_requirements *scr) /* [out] */
-{
- int err;
-
- /* Numerator and denominator of the fixed bayer downscaling factor. (numerator >= denominator) */
- unsigned int bds_num, bds_den;
-
- /* Horizontal/Vertical ratio of bayer scaling between input area and output area. */
- unsigned int bs_hor_ratio_in, bs_hor_ratio_out, bs_ver_ratio_in, bs_ver_ratio_out;
-
- /* Left padding set by InputFormatter. */
- unsigned int left_padding_bqs;
-
- /* Flags corresponding to NEED_BDS_FACTOR_2_00/NEED_BDS_FACTOR_1_50/NEED_BDS_FACTOR_1_25 macros
- * defined in isp kernels. */
- unsigned int need_bds_factor_2_00, need_bds_factor_1_50, need_bds_factor_1_25;
-
- /* Left padding adjusted inside the isp kernels. */
- unsigned int left_padding_adjusted_bqs;
-
- /* Top padding padded inside the isp kernel for bayer downscaling binaries. */
- unsigned int top_padding_bqs;
-
- /* Bayer downscaling factor 1.0 by fixed-point. */
- int bds_frac_acc = FRAC_ACC; /* FRAC_ACC is defined in ia_css_fixedbds_param.h. */
-
- /* Right/Down shift amount caused by filters applied BEFORE shading corrertion. */
- unsigned int right_shift_bqs_before_bs; /* right shift before bayer scaling */
- unsigned int right_shift_bqs_after_bs; /* right shift after bayer scaling */
- unsigned int down_shift_bqs_before_bs; /* down shift before bayer scaling */
- unsigned int down_shift_bqs_after_bs; /* down shift after bayer scaling */
-
- /* Origin of the real sensor data area on the internal frame at shading correction. */
- unsigned int sensor_data_origin_x_bqs_on_internal;
- unsigned int sensor_data_origin_y_bqs_on_internal;
-
- unsigned int bs_frac = bds_frac_acc; /* scaling factor 1.0 in fixed point */
- unsigned int bs_out, bs_in; /* scaling ratio in fixed point */
-
- IA_CSS_ENTER_PRIVATE("binary=%p, required_bds_factor=%d, stream_config=%p",
- binary, required_bds_factor, stream_config);
-
- /* Get the numerator and denominator of the required bayer downscaling factor. */
- err = sh_css_bds_factor_get_numerator_denominator(required_bds_factor,
- &bds_num, &bds_den);
- if (err) {
- IA_CSS_LEAVE_ERR_PRIVATE(err);
- return err;
- }
-
- IA_CSS_LOG("bds_num=%d, bds_den=%d", bds_num, bds_den);
-
- /* Set the horizontal/vertical ratio of bayer scaling between input area and output area. */
- bs_hor_ratio_in = bds_num;
- bs_hor_ratio_out = bds_den;
- bs_ver_ratio_in = bds_num;
- bs_ver_ratio_out = bds_den;
-
- /* Set the left padding set by InputFormatter. (ia_css_ifmtr_configure() in ifmtr.c) */
- if (stream_config->left_padding == -1)
- left_padding_bqs = _ISP_BQS(binary->left_padding);
- else
- left_padding_bqs = (unsigned int)((int)ISP_VEC_NELEMS - _ISP_BQS(stream_config->left_padding));
-
- IA_CSS_LOG("stream.left_padding=%d, binary.left_padding=%d, left_padding_bqs=%d",
- stream_config->left_padding, binary->left_padding,
- left_padding_bqs);
-
- /* Set the left padding adjusted inside the isp kernels.
- * When the bds_factor isn't 1.00, the left padding size is adjusted inside the isp,
- * before bayer downscaling. (scaled_hor_plane_index(), raw_compute_hphase() in raw.isp.c)
- */
- need_bds_factor_2_00 = ((binary->info->sp.bds.supported_bds_factors &
- (PACK_BDS_FACTOR(SH_CSS_BDS_FACTOR_2_00) |
- PACK_BDS_FACTOR(SH_CSS_BDS_FACTOR_2_50) |
- PACK_BDS_FACTOR(SH_CSS_BDS_FACTOR_3_00) |
- PACK_BDS_FACTOR(SH_CSS_BDS_FACTOR_4_00) |
- PACK_BDS_FACTOR(SH_CSS_BDS_FACTOR_4_50) |
- PACK_BDS_FACTOR(SH_CSS_BDS_FACTOR_5_00) |
- PACK_BDS_FACTOR(SH_CSS_BDS_FACTOR_6_00) |
- PACK_BDS_FACTOR(SH_CSS_BDS_FACTOR_8_00))) != 0);
-
- need_bds_factor_1_50 = ((binary->info->sp.bds.supported_bds_factors &
- (PACK_BDS_FACTOR(SH_CSS_BDS_FACTOR_1_50) |
- PACK_BDS_FACTOR(SH_CSS_BDS_FACTOR_2_25) |
- PACK_BDS_FACTOR(SH_CSS_BDS_FACTOR_3_00) |
- PACK_BDS_FACTOR(SH_CSS_BDS_FACTOR_4_50) |
- PACK_BDS_FACTOR(SH_CSS_BDS_FACTOR_6_00))) != 0);
-
- need_bds_factor_1_25 = ((binary->info->sp.bds.supported_bds_factors &
- (PACK_BDS_FACTOR(SH_CSS_BDS_FACTOR_1_25) |
- PACK_BDS_FACTOR(SH_CSS_BDS_FACTOR_2_50) |
- PACK_BDS_FACTOR(SH_CSS_BDS_FACTOR_5_00))) != 0);
-
- if (binary->info->sp.pipeline.left_cropping > 0 &&
- (need_bds_factor_2_00 || need_bds_factor_1_50 || need_bds_factor_1_25)) {
- /*
- * downscale 2.0 -> first_vec_adjusted_bqs = 128
- * downscale 1.5 -> first_vec_adjusted_bqs = 96
- * downscale 1.25 -> first_vec_adjusted_bqs = 80
- */
- unsigned int first_vec_adjusted_bqs = ISP_VEC_NELEMS * bs_hor_ratio_in / bs_hor_ratio_out;
- left_padding_adjusted_bqs = first_vec_adjusted_bqs
- - _ISP_BQS(binary->info->sp.pipeline.left_cropping);
- } else {
- left_padding_adjusted_bqs = left_padding_bqs;
- }
-
- IA_CSS_LOG("supported_bds_factors=%d, need_bds_factor:2_00=%d, 1_50=%d, 1_25=%d",
- binary->info->sp.bds.supported_bds_factors,
- need_bds_factor_2_00, need_bds_factor_1_50,
- need_bds_factor_1_25);
- IA_CSS_LOG("left_cropping=%d, left_padding_adjusted_bqs=%d",
- binary->info->sp.pipeline.left_cropping,
- left_padding_adjusted_bqs);
-
- /* Set the top padding padded inside the isp kernel for bayer downscaling binaries.
- * When the bds_factor isn't 1.00, the top padding is padded inside the isp
- * before bayer downscaling, because the top cropping size (input margin) is not enough.
- * (calculate_input_line(), raw_compute_vphase(), dma_read_raw() in raw.isp.c)
- * NOTE: In dma_read_raw(), the factor passed to raw_compute_vphase() is got by get_bds_factor_for_dma_read().
- * This factor is BDS_FPVAL_100/BDS_FPVAL_125/BDS_FPVAL_150/BDS_FPVAL_200.
- */
- top_padding_bqs = 0;
- if (binary->info->sp.pipeline.top_cropping > 0 &&
- (required_bds_factor == SH_CSS_BDS_FACTOR_1_25 ||
- required_bds_factor == SH_CSS_BDS_FACTOR_1_50 ||
- required_bds_factor == SH_CSS_BDS_FACTOR_2_00)) {
- /* Calculation from calculate_input_line() and raw_compute_vphase() in raw.isp.c. */
- int top_cropping_bqs = _ISP_BQS(binary->info->sp.pipeline.top_cropping);
- /* top cropping (in bqs) */
- int factor = bds_num * bds_frac_acc /
- bds_den; /* downscaling factor by fixed-point */
- int top_padding_bqsxfrac_acc = (top_cropping_bqs * factor - top_cropping_bqs *
- bds_frac_acc)
- + (2 * bds_frac_acc - factor); /* top padding by fixed-point (in bqs) */
-
- top_padding_bqs = (unsigned int)((top_padding_bqsxfrac_acc + bds_frac_acc / 2 -
- 1) / bds_frac_acc);
- }
-
- IA_CSS_LOG("top_cropping=%d, top_padding_bqs=%d",
- binary->info->sp.pipeline.top_cropping, top_padding_bqs);
-
- /* Set the right/down shift amount caused by filters applied BEFORE bayer scaling,
- * which scaling is applied BEFORE shading corrertion.
- *
- * When the bds_factor isn't 1.00, 3x3 anti-alias filter is applied to each color plane(Gr/R/B/Gb)
- * before bayer downscaling.
- * This filter shifts each color plane (Gr/R/B/Gb) to right/down directions by 1 pixel.
- */
- right_shift_bqs_before_bs = 0;
- down_shift_bqs_before_bs = 0;
-
- if (need_bds_factor_2_00 || need_bds_factor_1_50 || need_bds_factor_1_25) {
- right_shift_bqs_before_bs = 1;
- down_shift_bqs_before_bs = 1;
- }
-
- IA_CSS_LOG("right_shift_bqs_before_bs=%d, down_shift_bqs_before_bs=%d",
- right_shift_bqs_before_bs, down_shift_bqs_before_bs);
-
- /* Set the right/down shift amount caused by filters applied AFTER bayer scaling,
- * which scaling is applied BEFORE shading corrertion.
- *
- * When DPC&BNR is processed between bayer scaling and shading correction,
- * DPC&BNR moves each color plane (Gr/R/B/Gb) to right/down directions by 1 pixel.
- */
- right_shift_bqs_after_bs = 0;
- down_shift_bqs_after_bs = 0;
-
- /* if DPC&BNR is enabled in the binary */
- if (binary->info->mem_offsets.offsets.param->dmem.dp.size != 0) {
- right_shift_bqs_after_bs = 1;
- down_shift_bqs_after_bs = 1;
- }
-
- IA_CSS_LOG("right_shift_bqs_after_bs=%d, down_shift_bqs_after_bs=%d",
- right_shift_bqs_after_bs, down_shift_bqs_after_bs);
-
- bs_out = bs_hor_ratio_out * bs_frac;
- bs_in = bs_hor_ratio_in * bs_frac;
- sensor_data_origin_x_bqs_on_internal =
- ((left_padding_adjusted_bqs + right_shift_bqs_before_bs) * bs_out + bs_in / 2) / bs_in
- + right_shift_bqs_after_bs; /* "+ bs_in/2": rounding */
-
- bs_out = bs_ver_ratio_out * bs_frac;
- bs_in = bs_ver_ratio_in * bs_frac;
- sensor_data_origin_y_bqs_on_internal =
- ((top_padding_bqs + down_shift_bqs_before_bs) * bs_out + bs_in / 2) / bs_in
- + down_shift_bqs_after_bs; /* "+ bs_in/2": rounding */
-
- scr->bayer_scale_hor_ratio_in = (uint32_t)bs_hor_ratio_in;
- scr->bayer_scale_hor_ratio_out = (uint32_t)bs_hor_ratio_out;
- scr->bayer_scale_ver_ratio_in = (uint32_t)bs_ver_ratio_in;
- scr->bayer_scale_ver_ratio_out = (uint32_t)bs_ver_ratio_out;
- scr->sensor_data_origin_x_bqs_on_internal = (uint32_t)sensor_data_origin_x_bqs_on_internal;
- scr->sensor_data_origin_y_bqs_on_internal = (uint32_t)sensor_data_origin_y_bqs_on_internal;
-
- IA_CSS_LOG("sc_requirements: %d, %d, %d, %d, %d, %d",
- scr->bayer_scale_hor_ratio_in,
- scr->bayer_scale_hor_ratio_out,
- scr->bayer_scale_ver_ratio_in, scr->bayer_scale_ver_ratio_out,
- scr->sensor_data_origin_x_bqs_on_internal,
- scr->sensor_data_origin_y_bqs_on_internal);
-
- IA_CSS_LEAVE_ERR_PRIVATE(err);
- return err;
-}
-
/* Get the shading information of Shading Correction Type 1. */
static int
-isp2400_binary_get_shading_info_type_1(const struct ia_css_binary *binary, /* [in] */
- unsigned int required_bds_factor, /* [in] */
- const struct ia_css_stream_config *stream_config, /* [in] */
- struct ia_css_shading_info *info) /* [out] */
+binary_get_shading_info_type_1(const struct ia_css_binary *binary, /* [in] */
+ unsigned int required_bds_factor, /* [in] */
+ const struct ia_css_stream_config *stream_config, /* [in] */
+ struct ia_css_shading_info *info) /* [out] */
{
int err;
struct sh_css_shading_table_bayer_origin_compute_results res;
@@ -522,173 +307,6 @@ isp2400_binary_get_shading_info_type_1(const struct ia_css_binary *binary, /* [i
return err;
}
-/* Get the shading information of Shading Correction Type 1. */
-static int
-isp2401_binary_get_shading_info_type_1(const struct ia_css_binary *binary, /* [in] */
- unsigned int required_bds_factor, /* [in] */
- const struct ia_css_stream_config *stream_config, /* [in] */
- struct ia_css_shading_info *shading_info, /* [out] */
- struct ia_css_pipe_config *pipe_config) /* [out] */
-{
- int err;
- struct sh_css_binary_sc_requirements scr;
-
- u32 in_width_bqs, in_height_bqs, internal_width_bqs, internal_height_bqs;
- u32 num_hor_grids, num_ver_grids, bqs_per_grid_cell, tbl_width_bqs, tbl_height_bqs;
- u32 sensor_org_x_bqs_on_internal, sensor_org_y_bqs_on_internal, sensor_width_bqs, sensor_height_bqs;
- u32 sensor_center_x_bqs_on_internal, sensor_center_y_bqs_on_internal;
- u32 left, right, upper, lower;
- u32 adjust_left, adjust_right, adjust_upper, adjust_lower, adjust_width_bqs, adjust_height_bqs;
- u32 internal_org_x_bqs_on_tbl, internal_org_y_bqs_on_tbl;
- u32 sensor_org_x_bqs_on_tbl, sensor_org_y_bqs_on_tbl;
-
- assert(binary);
- assert(stream_config);
- assert(shading_info);
- assert(pipe_config);
-
- IA_CSS_ENTER_PRIVATE("binary=%p, required_bds_factor=%d, stream_config=%p",
- binary, required_bds_factor, stream_config);
-
- /* Initialize by default values. */
- *shading_info = DEFAULT_SHADING_INFO_TYPE_1;
-
- err = sh_css_binary_get_sc_requirements(binary, required_bds_factor, stream_config, &scr);
- if (err) {
- IA_CSS_LEAVE_ERR_PRIVATE(err);
- return err;
- }
-
- IA_CSS_LOG("binary: id=%d, sctbl=%dx%d, deci=%d",
- binary->info->sp.id, binary->sctbl_width_per_color, binary->sctbl_height, binary->deci_factor_log2);
- IA_CSS_LOG("binary: in=%dx%d, in_padded_w=%d, int=%dx%d, int_padded_w=%d, out=%dx%d, out_padded_w=%d",
- binary->in_frame_info.res.width, binary->in_frame_info.res.height, binary->in_frame_info.padded_width,
- binary->internal_frame_info.res.width, binary->internal_frame_info.res.height,
- binary->internal_frame_info.padded_width,
- binary->out_frame_info[0].res.width, binary->out_frame_info[0].res.height,
- binary->out_frame_info[0].padded_width);
-
- /* Set the input size from sensor, which includes left/top crop size. */
- in_width_bqs = _ISP_BQS(binary->in_frame_info.res.width);
- in_height_bqs = _ISP_BQS(binary->in_frame_info.res.height);
-
- /*
- * Frame size internally used in ISP, including sensor data and padding.
- * This is the frame size, to which the shading correction is applied.
- */
- internal_width_bqs = _ISP_BQS(binary->internal_frame_info.res.width);
- internal_height_bqs = _ISP_BQS(binary->internal_frame_info.res.height);
-
- /* Shading table. */
- num_hor_grids = binary->sctbl_width_per_color;
- num_ver_grids = binary->sctbl_height;
- bqs_per_grid_cell = (1 << binary->deci_factor_log2);
- tbl_width_bqs = (num_hor_grids - 1) * bqs_per_grid_cell;
- tbl_height_bqs = (num_ver_grids - 1) * bqs_per_grid_cell;
-
- IA_CSS_LOG("tbl_width_bqs=%d, tbl_height_bqs=%d", tbl_width_bqs, tbl_height_bqs);
-
- /*
- * Real sensor data area on the internal frame at shading correction.
- * Filters and scaling are applied to the internal frame before
- * shading correction, depending on the binary.
- */
- sensor_org_x_bqs_on_internal = scr.sensor_data_origin_x_bqs_on_internal;
- sensor_org_y_bqs_on_internal = scr.sensor_data_origin_y_bqs_on_internal;
- {
- unsigned int bs_frac = 8; /* scaling factor 1.0 in fixed point (8 == FRAC_ACC macro in ISP) */
- unsigned int bs_out, bs_in; /* scaling ratio in fixed point */
-
- bs_out = scr.bayer_scale_hor_ratio_out * bs_frac;
- bs_in = scr.bayer_scale_hor_ratio_in * bs_frac;
- sensor_width_bqs = (in_width_bqs * bs_out + bs_in / 2) / bs_in; /* "+ bs_in/2": rounding */
-
- bs_out = scr.bayer_scale_ver_ratio_out * bs_frac;
- bs_in = scr.bayer_scale_ver_ratio_in * bs_frac;
- sensor_height_bqs = (in_height_bqs * bs_out + bs_in / 2) / bs_in; /* "+ bs_in/2": rounding */
- }
-
- /* Center of the sensor data on the internal frame at shading correction. */
- sensor_center_x_bqs_on_internal = sensor_org_x_bqs_on_internal + sensor_width_bqs / 2;
- sensor_center_y_bqs_on_internal = sensor_org_y_bqs_on_internal + sensor_height_bqs / 2;
-
- /* Size of left/right/upper/lower sides of the sensor center on the internal frame. */
- left = sensor_center_x_bqs_on_internal;
- right = internal_width_bqs - sensor_center_x_bqs_on_internal;
- upper = sensor_center_y_bqs_on_internal;
- lower = internal_height_bqs - sensor_center_y_bqs_on_internal;
-
- /* Align the size of left/right/upper/lower sides to a multiple of the grid cell size. */
- adjust_left = CEIL_MUL(left, bqs_per_grid_cell);
- adjust_right = CEIL_MUL(right, bqs_per_grid_cell);
- adjust_upper = CEIL_MUL(upper, bqs_per_grid_cell);
- adjust_lower = CEIL_MUL(lower, bqs_per_grid_cell);
-
- /* Shading table should cover the adjusted frame size. */
- adjust_width_bqs = adjust_left + adjust_right;
- adjust_height_bqs = adjust_upper + adjust_lower;
-
- IA_CSS_LOG("adjust_width_bqs=%d, adjust_height_bqs=%d", adjust_width_bqs, adjust_height_bqs);
-
- if (adjust_width_bqs > tbl_width_bqs || adjust_height_bqs > tbl_height_bqs) {
- IA_CSS_LEAVE_ERR_PRIVATE(-EINVAL);
- return -EINVAL;
- }
-
- /* Origin of the internal frame on the shading table. */
- internal_org_x_bqs_on_tbl = adjust_left - left;
- internal_org_y_bqs_on_tbl = adjust_upper - upper;
-
- /* Origin of the real sensor data area on the shading table. */
- sensor_org_x_bqs_on_tbl = internal_org_x_bqs_on_tbl + sensor_org_x_bqs_on_internal;
- sensor_org_y_bqs_on_tbl = internal_org_y_bqs_on_tbl + sensor_org_y_bqs_on_internal;
-
- /* The shading information necessary as API is stored in the shading_info. */
- shading_info->info.type_1.num_hor_grids = num_hor_grids;
- shading_info->info.type_1.num_ver_grids = num_ver_grids;
- shading_info->info.type_1.bqs_per_grid_cell = bqs_per_grid_cell;
-
- shading_info->info.type_1.bayer_scale_hor_ratio_in = scr.bayer_scale_hor_ratio_in;
- shading_info->info.type_1.bayer_scale_hor_ratio_out = scr.bayer_scale_hor_ratio_out;
- shading_info->info.type_1.bayer_scale_ver_ratio_in = scr.bayer_scale_ver_ratio_in;
- shading_info->info.type_1.bayer_scale_ver_ratio_out = scr.bayer_scale_ver_ratio_out;
-
- shading_info->info.type_1.isp_input_sensor_data_res_bqs.width = in_width_bqs;
- shading_info->info.type_1.isp_input_sensor_data_res_bqs.height = in_height_bqs;
-
- shading_info->info.type_1.sensor_data_res_bqs.width = sensor_width_bqs;
- shading_info->info.type_1.sensor_data_res_bqs.height = sensor_height_bqs;
-
- shading_info->info.type_1.sensor_data_origin_bqs_on_sctbl.x = (int32_t)sensor_org_x_bqs_on_tbl;
- shading_info->info.type_1.sensor_data_origin_bqs_on_sctbl.y = (int32_t)sensor_org_y_bqs_on_tbl;
-
- /* The shading information related to ISP (but, not necessary as API) is stored in the pipe_config. */
- pipe_config->internal_frame_origin_bqs_on_sctbl.x = (int32_t)internal_org_x_bqs_on_tbl;
- pipe_config->internal_frame_origin_bqs_on_sctbl.y = (int32_t)internal_org_y_bqs_on_tbl;
-
- IA_CSS_LOG("shading_info: grids=%dx%d, cell=%d, scale=%d,%d,%d,%d, input=%dx%d, data=%dx%d, origin=(%d,%d)",
- shading_info->info.type_1.num_hor_grids,
- shading_info->info.type_1.num_ver_grids,
- shading_info->info.type_1.bqs_per_grid_cell,
- shading_info->info.type_1.bayer_scale_hor_ratio_in,
- shading_info->info.type_1.bayer_scale_hor_ratio_out,
- shading_info->info.type_1.bayer_scale_ver_ratio_in,
- shading_info->info.type_1.bayer_scale_ver_ratio_out,
- shading_info->info.type_1.isp_input_sensor_data_res_bqs.width,
- shading_info->info.type_1.isp_input_sensor_data_res_bqs.height,
- shading_info->info.type_1.sensor_data_res_bqs.width,
- shading_info->info.type_1.sensor_data_res_bqs.height,
- shading_info->info.type_1.sensor_data_origin_bqs_on_sctbl.x,
- shading_info->info.type_1.sensor_data_origin_bqs_on_sctbl.y);
-
- IA_CSS_LOG("pipe_config: origin=(%d,%d)",
- pipe_config->internal_frame_origin_bqs_on_sctbl.x,
- pipe_config->internal_frame_origin_bqs_on_sctbl.y);
-
- IA_CSS_LEAVE_ERR_PRIVATE(err);
- return err;
-}
-
int
ia_css_binary_get_shading_info(const struct ia_css_binary *binary, /* [in] */
@@ -706,25 +324,14 @@ ia_css_binary_get_shading_info(const struct ia_css_binary *binary, /* [in] */
IA_CSS_ENTER_PRIVATE("binary=%p, type=%d, required_bds_factor=%d, stream_config=%p",
binary, type, required_bds_factor, stream_config);
- if (type != IA_CSS_SHADING_CORRECTION_TYPE_1) {
+ if (type == IA_CSS_SHADING_CORRECTION_TYPE_1)
+ err = binary_get_shading_info_type_1(binary,
+ required_bds_factor,
+ stream_config,
+ shading_info);
+ else
err = -ENOTSUPP;
- IA_CSS_LEAVE_ERR_PRIVATE(err);
- return err;
- }
-
- if (!IS_ISP2401)
- err = isp2400_binary_get_shading_info_type_1(binary,
- required_bds_factor,
- stream_config,
- shading_info);
- else
- err = isp2401_binary_get_shading_info_type_1(binary,
- required_bds_factor,
- stream_config,
- shading_info,
- pipe_config);
-
IA_CSS_LEAVE_ERR_PRIVATE(err);
return err;
}
--
2.33.1