Add EIOINTC irqchip DT support, which is needed for Loongson chips
that are DT-based and support EIOINTC, such as the Loongson-2K0500 chip.
---
V4:
- patch(1/2)
- Simplify the definition of the reg attribute by declaring the entire
chip configuration space directly.
V3:
- patch(1/2)
- Drop quotes;
- Drop interrupt-names;
- Drop loongson,eio-num-vecs;
- SoC-based compatibles instead of version-based compatibles.
- patch (2/2)
- irq_set_handler_data() is used to get parent irq form DTS;
- Set vec_count by judging compatibles.
V2:
- Add the dt-bindings file (1/2);
- patch(2/2)
- Remove forgotten debugging messages;
- Change compatible string name to "loongson,eiointc-1.0".
Binbin Zhou (2):
dt-bindings: interrupt-controller: Add Loongson EIOINTC
irqchip/loongson-eiointc: Add DT init support
.../loongson,eiointc.yaml | 59 ++++++++
drivers/irqchip/irq-loongson-eiointc.c | 129 +++++++++++++-----
2 files changed, 154 insertions(+), 34 deletions(-)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml
--
2.39.1
Add EIOINTC irqchip DT support, which is needed for Loongson chips
based on DT and supporting EIOINTC, such as the Loongson-2K0500 SOC.
Signed-off-by: Binbin Zhou <[email protected]>
---
drivers/irqchip/irq-loongson-eiointc.c | 129 ++++++++++++++++++-------
1 file changed, 95 insertions(+), 34 deletions(-)
diff --git a/drivers/irqchip/irq-loongson-eiointc.c b/drivers/irqchip/irq-loongson-eiointc.c
index d15fd38c1756..cfeb40daf1d7 100644
--- a/drivers/irqchip/irq-loongson-eiointc.c
+++ b/drivers/irqchip/irq-loongson-eiointc.c
@@ -39,6 +39,7 @@ static int nr_pics;
struct eiointc_priv {
u32 node;
+ u32 vec_count;
nodemask_t node_map;
cpumask_t cpuspan_map;
struct fwnode_handle *domain_handle;
@@ -156,18 +157,18 @@ static int eiointc_router_init(unsigned int cpu)
if ((cpu_logical_map(cpu) % CORES_PER_EIO_NODE) == 0) {
eiointc_enable();
- for (i = 0; i < VEC_COUNT / 32; i++) {
+ for (i = 0; i < eiointc_priv[0]->vec_count / 32; i++) {
data = (((1 << (i * 2 + 1)) << 16) | (1 << (i * 2)));
iocsr_write32(data, EIOINTC_REG_NODEMAP + i * 4);
}
- for (i = 0; i < VEC_COUNT / 32 / 4; i++) {
+ for (i = 0; i < eiointc_priv[0]->vec_count / 32 / 4; i++) {
bit = BIT(1 + index); /* Route to IP[1 + index] */
data = bit | (bit << 8) | (bit << 16) | (bit << 24);
iocsr_write32(data, EIOINTC_REG_IPMAP + i * 4);
}
- for (i = 0; i < VEC_COUNT / 4; i++) {
+ for (i = 0; i < eiointc_priv[0]->vec_count / 4; i++) {
/* Route to Node-0 Core-0 */
if (index == 0)
bit = BIT(cpu_logical_map(0));
@@ -178,7 +179,7 @@ static int eiointc_router_init(unsigned int cpu)
iocsr_write32(data, EIOINTC_REG_ROUTE + i * 4);
}
- for (i = 0; i < VEC_COUNT / 32; i++) {
+ for (i = 0; i < eiointc_priv[0]->vec_count / 32; i++) {
data = 0xffffffff;
iocsr_write32(data, EIOINTC_REG_ENABLE + i * 4);
iocsr_write32(data, EIOINTC_REG_BOUNCE + i * 4);
@@ -198,7 +199,7 @@ static void eiointc_irq_dispatch(struct irq_desc *desc)
chained_irq_enter(chip, desc);
- for (i = 0; i < VEC_REG_COUNT; i++) {
+ for (i = 0; i < eiointc_priv[0]->vec_count / VEC_COUNT_PER_REG; i++) {
pending = iocsr_read64(EIOINTC_REG_ISR + (i << 3));
iocsr_write64(pending, EIOINTC_REG_ISR + (i << 3));
while (pending) {
@@ -316,7 +317,7 @@ static void eiointc_resume(void)
eiointc_router_init(0);
for (i = 0; i < nr_pics; i++) {
- for (j = 0; j < VEC_COUNT; j++) {
+ for (j = 0; j < eiointc_priv[0]->vec_count; j++) {
desc = irq_resolve_mapping(eiointc_priv[i]->eiointc_domain, j);
if (desc && desc->handle_irq && desc->handle_irq != handle_bad_irq) {
raw_spin_lock(&desc->lock);
@@ -373,11 +374,44 @@ static int __init acpi_cascade_irqdomain_init(void)
return 0;
}
+static int __init eiointc_init(struct eiointc_priv *priv, int parent_irq,
+ u64 node_map)
+{
+ int i;
+
+ node_map = node_map ? node_map : -1ULL;
+ for_each_possible_cpu(i) {
+ if (node_map & (1ULL << (cpu_to_eio_node(i)))) {
+ node_set(cpu_to_eio_node(i), priv->node_map);
+ cpumask_or(&priv->cpuspan_map, &priv->cpuspan_map,
+ cpumask_of(i));
+ }
+ }
+
+ priv->eiointc_domain = irq_domain_create_linear(priv->domain_handle,
+ priv->vec_count,
+ &eiointc_domain_ops,
+ priv);
+ if (!priv->eiointc_domain) {
+ pr_err("loongson-extioi: cannot add IRQ domain\n");
+ return -ENOMEM;
+ }
+
+ eiointc_priv[nr_pics++] = priv;
+ eiointc_router_init(0);
+ irq_set_chained_handler_and_data(parent_irq, eiointc_irq_dispatch, priv);
+ register_syscore_ops(&eiointc_syscore_ops);
+ cpuhp_setup_state_nocalls(CPUHP_AP_IRQ_LOONGARCH_STARTING,
+ "irqchip/loongarch/intc:starting",
+ eiointc_router_init, NULL);
+
+ return 0;
+}
+
int __init eiointc_acpi_init(struct irq_domain *parent,
struct acpi_madt_eio_pic *acpi_eiointc)
{
- int i, ret, parent_irq;
- unsigned long node_map;
+ int parent_irq, ret;
struct eiointc_priv *priv;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
@@ -391,39 +425,20 @@ int __init eiointc_acpi_init(struct irq_domain *parent,
goto out_free_priv;
}
+ priv->vec_count = VEC_COUNT;
priv->node = acpi_eiointc->node;
- node_map = acpi_eiointc->node_map ? : -1ULL;
-
- for_each_possible_cpu(i) {
- if (node_map & (1ULL << cpu_to_eio_node(i))) {
- node_set(cpu_to_eio_node(i), priv->node_map);
- cpumask_or(&priv->cpuspan_map, &priv->cpuspan_map, cpumask_of(i));
- }
- }
-
- /* Setup IRQ domain */
- priv->eiointc_domain = irq_domain_create_linear(priv->domain_handle, VEC_COUNT,
- &eiointc_domain_ops, priv);
- if (!priv->eiointc_domain) {
- pr_err("loongson-eiointc: cannot add IRQ domain\n");
- goto out_free_handle;
- }
-
- eiointc_priv[nr_pics++] = priv;
-
- eiointc_router_init(0);
-
parent_irq = irq_create_mapping(parent, acpi_eiointc->cascade);
- irq_set_chained_handler_and_data(parent_irq, eiointc_irq_dispatch, priv);
- register_syscore_ops(&eiointc_syscore_ops);
- cpuhp_setup_state_nocalls(CPUHP_AP_IRQ_LOONGARCH_STARTING,
- "irqchip/loongarch/intc:starting",
- eiointc_router_init, NULL);
+ ret = eiointc_init(priv, parent_irq, acpi_eiointc->node_map);
+ if (ret < 0)
+ goto out_free_handle;
acpi_set_vec_parent(acpi_eiointc->node, priv->eiointc_domain, pch_group);
acpi_set_vec_parent(acpi_eiointc->node, priv->eiointc_domain, msi_group);
+
ret = acpi_cascade_irqdomain_init();
+ if (ret < 0)
+ goto out_free_handle;
return ret;
@@ -435,3 +450,49 @@ int __init eiointc_acpi_init(struct irq_domain *parent,
return -ENOMEM;
}
+
+static int __init eiointc_of_init(struct device_node *of_node,
+ struct device_node *parent)
+{
+ int parent_irq, ret;
+ struct eiointc_priv *priv;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ parent_irq = irq_of_parse_and_map(of_node, 0);
+ if (parent_irq <= 0) {
+ ret = -ENODEV;
+ goto out_free_priv;
+ }
+
+ ret = irq_set_handler_data(parent_irq, priv);
+ if (ret < 0)
+ goto out_free_priv;
+
+ /*
+ * In particular, the number of devices supported by the LS2K0500
+ * extended I/O interrupt vector is 128.
+ */
+ if (of_device_is_compatible(of_node, "loongson,ls2k0500-eiointc"))
+ priv->vec_count = 128;
+ else
+ priv->vec_count = VEC_COUNT;
+
+ priv->node = 0;
+ priv->domain_handle = of_node_to_fwnode(of_node);
+
+ ret = eiointc_init(priv, parent_irq, 0);
+ if (ret < 0)
+ goto out_free_priv;
+
+ return 0;
+
+out_free_priv:
+ kfree(priv);
+ return ret;
+}
+
+IRQCHIP_DECLARE(loongson_ls2k0500_eiointc, "loongson,ls2k0500-eiointc", eiointc_of_init);
+IRQCHIP_DECLARE(loongson_ls2k2000_eiointc, "loongson,ls2k2000-eiointc", eiointc_of_init);
--
2.39.1
Add Loongson Extended I/O Interrupt controller binding with DT schema
format using json-schema.
Signed-off-by: Binbin Zhou <[email protected]>
---
.../loongson,eiointc.yaml | 59 +++++++++++++++++++
1 file changed, 59 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml
new file mode 100644
index 000000000000..393c128a41d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,eiointc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson Extended I/O Interrupt Controller
+
+maintainers:
+ - Binbin Zhou <[email protected]>
+
+description: |
+ This interrupt controller is found on the Loongson-3 family chips and
+ Loongson-2K series chips and is used to distribute interrupts directly to
+ individual cores without forwarding them through the HT's interrupt line.
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - loongson,ls2k0500-eiointc
+ - loongson,ls2k2000-eiointc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ eiointc: interrupt-controller@1fe11600 {
+ compatible = "loongson,ls2k0500-eiointc";
+ reg = <0x1fe10000 0x10000>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <3>;
+ };
+
+...
--
2.39.1
On Mon, 24 Apr 2023 20:49:11 +0800, Binbin Zhou wrote:
> Add Loongson Extended I/O Interrupt controller binding with DT schema
> format using json-schema.
>
> Signed-off-by: Binbin Zhou <[email protected]>
> ---
> .../loongson,eiointc.yaml | 59 +++++++++++++++++++
> 1 file changed, 59 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml
>
Reviewed-by: Rob Herring <[email protected]>