This patch series adds the relevant phy and controller
configurations for enabling USB2 on IPQ5332
v4:
Binding and dts:-
Change node name (bindings & dts)
Driver:-
Remove unused enum
static const for '.data'
Error handling for devm_clk_get
v3:
Fix bindings file based on review comments
v1:
Cleanup DTS
Combine driver, kconfig and makefile patches
Remove unused functions from M31 driver
Drop the clock driver changes
Varadarajan Narayanan (6):
dt-bindings: usb: dwc3: Add IPQ5332 compatible
dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
phy: qcom-m31: Introduce qcom,m31 USB phy driver
arm64: dts: qcom: ipq5332: Add USB related nodes
arm64: dts: qcom: ipq5332: Enable USB
arm64: defconfig: Enable M31 USB phy driver
.../bindings/phy/qcom,ipq5332-usb-hsphy.yaml | 48 ++++
.../devicetree/bindings/usb/qcom,dwc3.yaml | 3 +
arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts | 12 +
arch/arm64/boot/dts/qcom/ipq5332.dtsi | 53 +++++
arch/arm64/configs/defconfig | 1 +
drivers/phy/qualcomm/Kconfig | 11 +
drivers/phy/qualcomm/Makefile | 1 +
drivers/phy/qualcomm/phy-qcom-m31.c | 256 +++++++++++++++++++++
8 files changed, 385 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/qcom,ipq5332-usb-hsphy.yaml
create mode 100644 drivers/phy/qualcomm/phy-qcom-m31.c
--
2.7.4
Add the M31 USB2 phy driver.
Signed-off-by: Varadarajan Narayanan <[email protected]>
---
v4:
Remove unused enum
Error handling for devm_clk_get
v1:
Combine driver, makefile and kconfig into 1 patch
Remove 'qscratch' region and its usage. The controller driver takes care
of those settings
Use compatible/data to handle ipq5332 init
Drop the default case
Get resources by index instead of name as there is only one resource
Add clock
Fix review comments in the driver
---
drivers/phy/qualcomm/Kconfig | 11 ++
drivers/phy/qualcomm/Makefile | 1 +
drivers/phy/qualcomm/phy-qcom-m31.c | 256 ++++++++++++++++++++++++++++++++++++
3 files changed, 268 insertions(+)
create mode 100644 drivers/phy/qualcomm/phy-qcom-m31.c
diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig
index 97ca595..76be191 100644
--- a/drivers/phy/qualcomm/Kconfig
+++ b/drivers/phy/qualcomm/Kconfig
@@ -197,3 +197,14 @@ config PHY_QCOM_SGMII_ETH
help
Enable this to support the internal SerDes/SGMII PHY on various
Qualcomm chipsets.
+
+config PHY_QCOM_M31_USB
+ tristate "Qualcomm M31 HS PHY driver support"
+ depends on (USB || USB_GADGET) && ARCH_QCOM
+ select USB_PHY
+ help
+ Enable this to support M31 HS PHY transceivers on Qualcomm chips
+ with DWC3 USB core. It handles PHY initialization, clock
+ management required after resetting the hardware and power
+ management. This driver is required even for peripheral only or
+ host only mode configurations.
diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile
index b030858..0b5dd66 100644
--- a/drivers/phy/qualcomm/Makefile
+++ b/drivers/phy/qualcomm/Makefile
@@ -22,3 +22,4 @@ obj-$(CONFIG_PHY_QCOM_USB_SS) += phy-qcom-usb-ss.o
obj-$(CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2)+= phy-qcom-snps-femto-v2.o
obj-$(CONFIG_PHY_QCOM_IPQ806X_USB) += phy-qcom-ipq806x-usb.o
obj-$(CONFIG_PHY_QCOM_SGMII_ETH) += phy-qcom-sgmii-eth.o
+obj-$(CONFIG_PHY_QCOM_M31_USB) += phy-qcom-m31.o
diff --git a/drivers/phy/qualcomm/phy-qcom-m31.c b/drivers/phy/qualcomm/phy-qcom-m31.c
new file mode 100644
index 0000000..fd568ef
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-m31.c
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2014-2016, 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/usb/of.h>
+#include <linux/usb/phy.h>
+
+#define USB2PHY_PORT_UTMI_CTRL1 0x40
+
+#define USB2PHY_PORT_UTMI_CTRL2 0x44
+ #define UTMI_ULPI_SEL BIT(7)
+ #define UTMI_TEST_MUX_SEL BIT(6)
+
+#define HS_PHY_CTRL_REG 0x10
+ #define UTMI_OTG_VBUS_VALID BIT(20)
+ #define SW_SESSVLD_SEL BIT(28)
+
+#define USB_PHY_UTMI_CTRL0 0x3c
+
+#define USB_PHY_UTMI_CTRL5 0x50
+ #define POR_EN BIT(1)
+ #define ATERESET ~BIT(0)
+
+#define USB_PHY_HS_PHY_CTRL_COMMON0 0x54
+ #define COMMONONN BIT(7)
+ #define FSEL BIT(4)
+ #define RETENABLEN BIT(3)
+ #define FREQ_24MHZ (5 << 4)
+
+#define USB_PHY_HS_PHY_CTRL2 0x64
+ #define USB2_SUSPEND_N_SEL BIT(3)
+ #define USB2_SUSPEND_N BIT(2)
+ #define USB2_UTMI_CLK_EN BIT(1)
+
+#define USB_PHY_CFG0 0x94
+ #define UTMI_PHY_OVERRIDE_EN BIT(1)
+
+#define USB_PHY_REFCLK_CTRL 0xa0
+ #define CLKCORE BIT(1)
+
+#define USB2PHY_PORT_POWERDOWN 0xa4
+ #define POWER_UP BIT(0)
+ #define POWER_DOWN 0
+
+#define USB_PHY_FSEL_SEL 0xb8
+ #define FREQ_SEL BIT(0)
+
+#define USB2PHY_USB_PHY_M31_XCFGI_1 0xbc
+ #define USB2_0_TX_ENABLE BIT(2)
+
+#define USB2PHY_USB_PHY_M31_XCFGI_4 0xc8
+ #define HSTX_SLEW_RATE_565PS GENMASK(1, 0)
+ #define PLL_CHARGING_PUMP_CURRENT_35UA GENMASK(4, 3)
+ #define ODT_VALUE_38_02_OHM GENMASK(7, 6)
+
+#define USB2PHY_USB_PHY_M31_XCFGI_5 0xcc
+ #define ODT_VALUE_45_02_OHM BIT(2)
+ #define HSTX_PRE_EMPHASIS_LEVEL_0_55MA BIT(0)
+
+#define USB2PHY_USB_PHY_M31_XCFGI_11 0xe4
+ #define XCFG_COARSE_TUNE_NUM BIT(1)
+ #define XCFG_FINE_TUNE_NUM BIT(3)
+
+struct m31_phy_regs {
+ u32 off;
+ u32 val;
+ u32 delay;
+};
+
+struct m31_priv_data {
+ bool ulpi_mode;
+ const struct m31_phy_regs *regs;
+};
+
+#define M31_REG(__o, __v, __d) \
+ { .off = __o, .val = __v, .delay = __d }
+
+#define M31_REG_INVALID 0xffffffffu
+
+struct m31_phy_regs m31_ipq5332_regs[] = {
+ M31_REG(USB_PHY_CFG0, UTMI_PHY_OVERRIDE_EN, 0),
+ M31_REG(USB_PHY_UTMI_CTRL5, POR_EN, 15),
+ M31_REG(USB_PHY_FSEL_SEL, FREQ_SEL, 0),
+ M31_REG(USB_PHY_HS_PHY_CTRL_COMMON0,
+ COMMONONN | FREQ_24MHZ | RETENABLEN, 0),
+ M31_REG(USB_PHY_UTMI_CTRL5, POR_EN & ATERESET, 0),
+ M31_REG(USB_PHY_HS_PHY_CTRL2,
+ USB2_SUSPEND_N_SEL | USB2_SUSPEND_N | USB2_UTMI_CLK_EN, 0),
+ M31_REG(USB2PHY_USB_PHY_M31_XCFGI_11,
+ XCFG_COARSE_TUNE_NUM | XCFG_FINE_TUNE_NUM, 0),
+ M31_REG(USB2PHY_USB_PHY_M31_XCFGI_4,
+ HSTX_SLEW_RATE_565PS | PLL_CHARGING_PUMP_CURRENT_35UA |
+ ODT_VALUE_38_02_OHM, 0),
+ M31_REG(USB2PHY_USB_PHY_M31_XCFGI_1, USB2_0_TX_ENABLE, 0),
+ M31_REG(USB2PHY_USB_PHY_M31_XCFGI_5,
+ ODT_VALUE_45_02_OHM | HSTX_PRE_EMPHASIS_LEVEL_0_55MA, 4),
+ M31_REG(USB_PHY_UTMI_CTRL5, 0x0, 0),
+ M31_REG(USB_PHY_HS_PHY_CTRL2, USB2_SUSPEND_N | USB2_UTMI_CLK_EN, 0),
+ M31_REG(M31_REG_INVALID, 0, 0),
+};
+
+struct m31usb_phy {
+ struct usb_phy phy;
+ void __iomem *base;
+ const struct m31_phy_regs *regs;
+
+ struct clk *cfg_ahb_clk;
+ struct reset_control *phy_reset;
+
+ bool cable_connected;
+ bool suspended;
+ bool ulpi_mode;
+};
+
+static void m31usb_phy_enable_clock(struct m31usb_phy *qphy)
+{
+ const struct m31_phy_regs *regs = qphy->regs;
+
+ for (; regs->off != M31_REG_INVALID; regs++) {
+ writel(regs->val, qphy->base + regs->off);
+ if (regs->delay)
+ udelay(regs->delay);
+ }
+}
+
+static int m31usb_phy_init(struct usb_phy *phy)
+{
+ int ret;
+ struct m31usb_phy *qphy = container_of(phy, struct m31usb_phy, phy);
+
+ ret = clk_prepare_enable(qphy->cfg_ahb_clk);
+ if (ret) {
+ dev_err(phy->dev, "failed to enable cfg ahb clock, %d\n", ret);
+ return ret;
+ }
+
+ /* Perform phy reset */
+ reset_control_assert(qphy->phy_reset);
+ udelay(5);
+ reset_control_deassert(qphy->phy_reset);
+
+ /* configure for ULPI mode if requested */
+ if (qphy->ulpi_mode)
+ writel(0x0, qphy->base + USB2PHY_PORT_UTMI_CTRL2);
+
+ /* Enable the PHY */
+ writel(POWER_UP, qphy->base + USB2PHY_PORT_POWERDOWN);
+
+ /* Make sure above write completed */
+ wmb();
+
+ /* Turn on phy ref clock */
+ m31usb_phy_enable_clock(qphy);
+
+ return 0;
+}
+
+static void m31usb_phy_shutdown(struct usb_phy *phy)
+{
+ struct m31usb_phy *qphy = container_of(phy, struct m31usb_phy, phy);
+
+ /* Disable the PHY */
+ writel_relaxed(POWER_DOWN, qphy->base + USB2PHY_PORT_POWERDOWN);
+ /* Make sure above write completed */
+ wmb();
+
+ clk_disable_unprepare(qphy->cfg_ahb_clk);
+}
+
+static int m31usb_phy_probe(struct platform_device *pdev)
+{
+ const struct m31_priv_data *data;
+ struct device *dev = &pdev->dev;
+ struct m31usb_phy *qphy;
+ int ret;
+
+ qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
+ if (!qphy)
+ return -ENOMEM;
+
+ qphy->phy.dev = dev;
+
+ qphy->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(qphy->base))
+ return PTR_ERR(qphy->base);
+
+ qphy->phy_reset = devm_reset_control_get_exclusive_by_index(dev, 0);
+ if (IS_ERR(qphy->phy_reset))
+ return PTR_ERR(qphy->phy_reset);
+
+ qphy->cfg_ahb_clk = devm_clk_get(dev, "cfg_ahb");
+ if (IS_ERR(qphy->cfg_ahb_clk)) {
+ ret = PTR_ERR(qphy->cfg_ahb_clk);
+ dev_err(dev, "failed to get cfg_ahb clock, %d\n", ret);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, qphy);
+
+ data = of_device_get_match_data(dev);
+ qphy->regs = data->regs;
+ qphy->ulpi_mode = data->ulpi_mode;
+
+ qphy->phy.label = "m31-usb-phy";
+ qphy->phy.init = m31usb_phy_init;
+ qphy->phy.shutdown = m31usb_phy_shutdown;
+ qphy->phy.type = USB_PHY_TYPE_USB2;
+
+ ret = usb_add_phy_dev(&qphy->phy);
+
+ return ret;
+}
+
+static void m31usb_phy_remove(struct platform_device *pdev)
+{
+ struct m31usb_phy *qphy = platform_get_drvdata(pdev);
+
+ usb_remove_phy(&qphy->phy);
+}
+
+static const struct m31_priv_data m31_ipq5332_data = {
+ .ulpi_mode = false,
+ .regs = m31_ipq5332_regs,
+};
+
+static const struct of_device_id m31usb_phy_id_table[] = {
+ { .compatible = "qcom,ipq5332-usb-hsphy", .data = &m31_ipq5332_data },
+ { },
+};
+MODULE_DEVICE_TABLE(of, m31usb_phy_id_table);
+
+static struct platform_driver m31usb_phy_driver = {
+ .probe = m31usb_phy_probe,
+ .remove_new = m31usb_phy_remove,
+ .driver = {
+ .name = "qcom-m31usb-phy",
+ .of_match_table = m31usb_phy_id_table,
+ },
+};
+
+module_platform_driver(m31usb_phy_driver);
+
+MODULE_DESCRIPTION("USB2 Qualcomm M31 HSPHY driver");
+MODULE_LICENSE("GPL");
--
2.7.4
On 12-07-23, 17:08, Varadarajan Narayanan wrote:
> Add the M31 USB2 phy driver.
>
> Signed-off-by: Varadarajan Narayanan <[email protected]>
> ---
> v4:
> Remove unused enum
> Error handling for devm_clk_get
> v1:
> Combine driver, makefile and kconfig into 1 patch
> Remove 'qscratch' region and its usage. The controller driver takes care
> of those settings
> Use compatible/data to handle ipq5332 init
> Drop the default case
> Get resources by index instead of name as there is only one resource
> Add clock
> Fix review comments in the driver
> ---
> drivers/phy/qualcomm/Kconfig | 11 ++
> drivers/phy/qualcomm/Makefile | 1 +
> drivers/phy/qualcomm/phy-qcom-m31.c | 256 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 268 insertions(+)
> create mode 100644 drivers/phy/qualcomm/phy-qcom-m31.c
>
> diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig
> index 97ca595..76be191 100644
> --- a/drivers/phy/qualcomm/Kconfig
> +++ b/drivers/phy/qualcomm/Kconfig
> @@ -197,3 +197,14 @@ config PHY_QCOM_SGMII_ETH
> help
> Enable this to support the internal SerDes/SGMII PHY on various
> Qualcomm chipsets.
> +
> +config PHY_QCOM_M31_USB
Sorted alphabetically please
> + tristate "Qualcomm M31 HS PHY driver support"
> + depends on (USB || USB_GADGET) && ARCH_QCOM
> + select USB_PHY
> + help
> + Enable this to support M31 HS PHY transceivers on Qualcomm chips
> + with DWC3 USB core. It handles PHY initialization, clock
> + management required after resetting the hardware and power
> + management. This driver is required even for peripheral only or
> + host only mode configurations.
> diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile
> index b030858..0b5dd66 100644
> --- a/drivers/phy/qualcomm/Makefile
> +++ b/drivers/phy/qualcomm/Makefile
> @@ -22,3 +22,4 @@ obj-$(CONFIG_PHY_QCOM_USB_SS) += phy-qcom-usb-ss.o
> obj-$(CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2)+= phy-qcom-snps-femto-v2.o
> obj-$(CONFIG_PHY_QCOM_IPQ806X_USB) += phy-qcom-ipq806x-usb.o
> obj-$(CONFIG_PHY_QCOM_SGMII_ETH) += phy-qcom-sgmii-eth.o
> +obj-$(CONFIG_PHY_QCOM_M31_USB) += phy-qcom-m31.o
this one too
> diff --git a/drivers/phy/qualcomm/phy-qcom-m31.c b/drivers/phy/qualcomm/phy-qcom-m31.c
> new file mode 100644
> index 0000000..fd568ef
> --- /dev/null
> +++ b/drivers/phy/qualcomm/phy-qcom-m31.c
> @@ -0,0 +1,256 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) 2014-2016, 2020, The Linux Foundation. All rights reserved.
> + */
we are in 2023
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +#include <linux/slab.h>
> +#include <linux/usb/of.h>
> +#include <linux/usb/phy.h>
> +
> +#define USB2PHY_PORT_UTMI_CTRL1 0x40
> +
> +#define USB2PHY_PORT_UTMI_CTRL2 0x44
> + #define UTMI_ULPI_SEL BIT(7)
> + #define UTMI_TEST_MUX_SEL BIT(6)
> +
> +#define HS_PHY_CTRL_REG 0x10
> + #define UTMI_OTG_VBUS_VALID BIT(20)
> + #define SW_SESSVLD_SEL BIT(28)
> +
> +#define USB_PHY_UTMI_CTRL0 0x3c
> +
> +#define USB_PHY_UTMI_CTRL5 0x50
> + #define POR_EN BIT(1)
> + #define ATERESET ~BIT(0)
??
> +
> +#define USB_PHY_HS_PHY_CTRL_COMMON0 0x54
> + #define COMMONONN BIT(7)
> + #define FSEL BIT(4)
> + #define RETENABLEN BIT(3)
> + #define FREQ_24MHZ (5 << 4)
Use GENMASK for these
> +
> +#define USB_PHY_HS_PHY_CTRL2 0x64
> + #define USB2_SUSPEND_N_SEL BIT(3)
> + #define USB2_SUSPEND_N BIT(2)
> + #define USB2_UTMI_CLK_EN BIT(1)
> +
> +#define USB_PHY_CFG0 0x94
> + #define UTMI_PHY_OVERRIDE_EN BIT(1)
> +
> +#define USB_PHY_REFCLK_CTRL 0xa0
> + #define CLKCORE BIT(1)
> +
> +#define USB2PHY_PORT_POWERDOWN 0xa4
> + #define POWER_UP BIT(0)
> + #define POWER_DOWN 0
> +
> +#define USB_PHY_FSEL_SEL 0xb8
> + #define FREQ_SEL BIT(0)
> +
> +#define USB2PHY_USB_PHY_M31_XCFGI_1 0xbc
> + #define USB2_0_TX_ENABLE BIT(2)
> +
> +#define USB2PHY_USB_PHY_M31_XCFGI_4 0xc8
> + #define HSTX_SLEW_RATE_565PS GENMASK(1, 0)
> + #define PLL_CHARGING_PUMP_CURRENT_35UA GENMASK(4, 3)
> + #define ODT_VALUE_38_02_OHM GENMASK(7, 6)
> +
> +#define USB2PHY_USB_PHY_M31_XCFGI_5 0xcc
> + #define ODT_VALUE_45_02_OHM BIT(2)
> + #define HSTX_PRE_EMPHASIS_LEVEL_0_55MA BIT(0)
> +
> +#define USB2PHY_USB_PHY_M31_XCFGI_11 0xe4
> + #define XCFG_COARSE_TUNE_NUM BIT(1)
> + #define XCFG_FINE_TUNE_NUM BIT(3)
> +
> +struct m31_phy_regs {
> + u32 off;
> + u32 val;
> + u32 delay;
> +};
> +
> +struct m31_priv_data {
> + bool ulpi_mode;
> + const struct m31_phy_regs *regs;
> +};
> +
> +#define M31_REG(__o, __v, __d) \
> + { .off = __o, .val = __v, .delay = __d }
> +
> +#define M31_REG_INVALID 0xffffffffu
> +
> +struct m31_phy_regs m31_ipq5332_regs[] = {
> + M31_REG(USB_PHY_CFG0, UTMI_PHY_OVERRIDE_EN, 0),
> + M31_REG(USB_PHY_UTMI_CTRL5, POR_EN, 15),
> + M31_REG(USB_PHY_FSEL_SEL, FREQ_SEL, 0),
> + M31_REG(USB_PHY_HS_PHY_CTRL_COMMON0,
> + COMMONONN | FREQ_24MHZ | RETENABLEN, 0),
> + M31_REG(USB_PHY_UTMI_CTRL5, POR_EN & ATERESET, 0),
> + M31_REG(USB_PHY_HS_PHY_CTRL2,
> + USB2_SUSPEND_N_SEL | USB2_SUSPEND_N | USB2_UTMI_CLK_EN, 0),
> + M31_REG(USB2PHY_USB_PHY_M31_XCFGI_11,
> + XCFG_COARSE_TUNE_NUM | XCFG_FINE_TUNE_NUM, 0),
> + M31_REG(USB2PHY_USB_PHY_M31_XCFGI_4,
> + HSTX_SLEW_RATE_565PS | PLL_CHARGING_PUMP_CURRENT_35UA |
> + ODT_VALUE_38_02_OHM, 0),
> + M31_REG(USB2PHY_USB_PHY_M31_XCFGI_1, USB2_0_TX_ENABLE, 0),
> + M31_REG(USB2PHY_USB_PHY_M31_XCFGI_5,
> + ODT_VALUE_45_02_OHM | HSTX_PRE_EMPHASIS_LEVEL_0_55MA, 4),
> + M31_REG(USB_PHY_UTMI_CTRL5, 0x0, 0),
> + M31_REG(USB_PHY_HS_PHY_CTRL2, USB2_SUSPEND_N | USB2_UTMI_CLK_EN, 0),
> + M31_REG(M31_REG_INVALID, 0, 0),
> +};
> +
> +struct m31usb_phy {
> + struct usb_phy phy;
> + void __iomem *base;
> + const struct m31_phy_regs *regs;
> +
> + struct clk *cfg_ahb_clk;
> + struct reset_control *phy_reset;
> +
> + bool cable_connected;
> + bool suspended;
> + bool ulpi_mode;
> +};
> +
> +static void m31usb_phy_enable_clock(struct m31usb_phy *qphy)
> +{
> + const struct m31_phy_regs *regs = qphy->regs;
> +
> + for (; regs->off != M31_REG_INVALID; regs++) {
why have last entry as invalid and check that, this is an array so you
can use ARRAY_SIZE to define the count of regs
> + writel(regs->val, qphy->base + regs->off);
> + if (regs->delay)
> + udelay(regs->delay);
> + }
> +}
> +
> +static int m31usb_phy_init(struct usb_phy *phy)
> +{
> + int ret;
> + struct m31usb_phy *qphy = container_of(phy, struct m31usb_phy, phy);
> +
> + ret = clk_prepare_enable(qphy->cfg_ahb_clk);
> + if (ret) {
> + dev_err(phy->dev, "failed to enable cfg ahb clock, %d\n", ret);
> + return ret;
> + }
> +
> + /* Perform phy reset */
> + reset_control_assert(qphy->phy_reset);
> + udelay(5);
> + reset_control_deassert(qphy->phy_reset);
> +
> + /* configure for ULPI mode if requested */
> + if (qphy->ulpi_mode)
> + writel(0x0, qphy->base + USB2PHY_PORT_UTMI_CTRL2);
> +
> + /* Enable the PHY */
> + writel(POWER_UP, qphy->base + USB2PHY_PORT_POWERDOWN);
> +
> + /* Make sure above write completed */
> + wmb();
> +
> + /* Turn on phy ref clock */
> + m31usb_phy_enable_clock(qphy);
> +
> + return 0;
> +}
> +
> +static void m31usb_phy_shutdown(struct usb_phy *phy)
> +{
> + struct m31usb_phy *qphy = container_of(phy, struct m31usb_phy, phy);
> +
> + /* Disable the PHY */
> + writel_relaxed(POWER_DOWN, qphy->base + USB2PHY_PORT_POWERDOWN);
> + /* Make sure above write completed */
> + wmb();
> +
> + clk_disable_unprepare(qphy->cfg_ahb_clk);
> +}
> +
> +static int m31usb_phy_probe(struct platform_device *pdev)
> +{
> + const struct m31_priv_data *data;
> + struct device *dev = &pdev->dev;
> + struct m31usb_phy *qphy;
> + int ret;
> +
> + qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
> + if (!qphy)
> + return -ENOMEM;
> +
> + qphy->phy.dev = dev;
> +
> + qphy->base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(qphy->base))
> + return PTR_ERR(qphy->base);
> +
> + qphy->phy_reset = devm_reset_control_get_exclusive_by_index(dev, 0);
> + if (IS_ERR(qphy->phy_reset))
> + return PTR_ERR(qphy->phy_reset);
> +
> + qphy->cfg_ahb_clk = devm_clk_get(dev, "cfg_ahb");
> + if (IS_ERR(qphy->cfg_ahb_clk)) {
> + ret = PTR_ERR(qphy->cfg_ahb_clk);
> + dev_err(dev, "failed to get cfg_ahb clock, %d\n", ret);
> + return ret;
> + }
> +
> + platform_set_drvdata(pdev, qphy);
> +
> + data = of_device_get_match_data(dev);
> + qphy->regs = data->regs;
> + qphy->ulpi_mode = data->ulpi_mode;
> +
> + qphy->phy.label = "m31-usb-phy";
> + qphy->phy.init = m31usb_phy_init;
> + qphy->phy.shutdown = m31usb_phy_shutdown;
> + qphy->phy.type = USB_PHY_TYPE_USB2;
> +
> + ret = usb_add_phy_dev(&qphy->phy);
why usb and not devm_phy_create()? It should be generic phy here
--
~Vinod