Hello everyone,
V8 of the series adding support for the Techwell TW9900 multi standard decoder.
It's a pretty simple decoder compared to the TW9910, since it doesn't have a
built-in scaler/crop engine.
v8 => v9:
- added a "depends on" GPIOLIB, PM and "select" V4L2_ASYNC to Kconfig
- reworked the locking to protect the tw9900->streaming global state
- folded power_on and power_off into runtime_resume and runtime_suspend
callbacks
- used pm_runtime_resume_and get instead pm_runtime_get_sync
v7 => v8:
- fixed the number of analog input ports: it is just one.
- added endpoints of the analog input port
- added vdd-supply to the required in the dt-binding documentation
- added back pm_runtime
- added a mutex to Serialize access to hardware and current mode configuration
- split get_fmt and set_fmt callbacks
- removed the tw9900_cancel_autodetect()
v6 => v7:
- added powerdown-gpios and input ports to dt-bindings
- added #include <linux/bitfield.h> to fix a Warning from the kernel
robot
- removed a dev_info and replaced a dev_err by dev_err_probe
v5[1] => v6:
- dropped .skip_top and .field in the supported_modes
- added error handling for the i2c writes/reads
- added the colorimetry information to fill_fmt
- removed pm_runtime
- added the g_input_status callback
- dropped SECAM
- dropped the non-standard PAL/NTSC variants
Any feedback is appreciated,
Mehdi Djait
media_tree, base-commit: 3e238417254bfdcc23fe207780b59cbb08656762
[1] https://lore.kernel.org/linux-media/[email protected]/
Mehdi Djait (3):
dt-bindings: vendor-prefixes: Add techwell vendor prefix
media: dt-bindings: media: i2c: Add bindings for TW9900
media: i2c: Introduce a driver for the Techwell TW9900 decoder
.../bindings/media/i2c/techwell,tw9900.yaml | 137 +++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
MAINTAINERS | 6 +
drivers/media/i2c/Kconfig | 15 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/tw9900.c | 777 ++++++++++++++++++
6 files changed, 938 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml
create mode 100644 drivers/media/i2c/tw9900.c
--
2.41.0
The Techwell video decoder supports PAL, NTSC standards and
has a parallel BT.656 output interface.
This commit adds support for this device, with basic support
for NTSC and PAL, along with brightness and contrast controls.
The TW9900 is capable of automatic standard detection. This
driver is implemented with support for PAL and NTSC
autodetection.
Signed-off-by: Mehdi Djait <[email protected]>
---
MAINTAINERS | 6 +
drivers/media/i2c/Kconfig | 15 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/tw9900.c | 777 +++++++++++++++++++++++++++++++++++++
4 files changed, 799 insertions(+)
create mode 100644 drivers/media/i2c/tw9900.c
diff --git a/MAINTAINERS b/MAINTAINERS
index f3e6dbbbbccb..92c41bfee43e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -21142,6 +21142,12 @@ L: [email protected]
S: Maintained
F: drivers/media/rc/ttusbir.c
+TECHWELL TW9900 VIDEO DECODER
+M: Mehdi Djait <[email protected]>
+L: [email protected]
+S: Maintained
+F: drivers/media/i2c/tw9900.c
+
TECHWELL TW9910 VIDEO DECODER
L: [email protected]
S: Orphan
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 59ee0ca2c978..f63286f8e5a4 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -1186,6 +1186,21 @@ config VIDEO_TW2804
To compile this driver as a module, choose M here: the
module will be called tw2804.
+config VIDEO_TW9900
+ tristate "Techwell TW9900 video decoder"
+ depends on GPIOLIB
+ depends on VIDEO_DEV && I2C
+ depends on PM
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_ASYNC
+ help
+ Support for the Techwell TW9900 multi-standard video decoder.
+ It supports NTSC, PAL standards with auto-detection features.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tw9900.
+
config VIDEO_TW9903
tristate "Techwell TW9903 video decoder"
depends on VIDEO_DEV && I2C
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index f5010f80a21f..a17ee899a859 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -136,6 +136,7 @@ obj-$(CONFIG_VIDEO_TVP514X) += tvp514x.o
obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o
obj-$(CONFIG_VIDEO_TVP7002) += tvp7002.o
obj-$(CONFIG_VIDEO_TW2804) += tw2804.o
+obj-$(CONFIG_VIDEO_TW9900) += tw9900.o
obj-$(CONFIG_VIDEO_TW9903) += tw9903.o
obj-$(CONFIG_VIDEO_TW9906) += tw9906.o
obj-$(CONFIG_VIDEO_TW9910) += tw9910.o
diff --git a/drivers/media/i2c/tw9900.c b/drivers/media/i2c/tw9900.c
new file mode 100644
index 000000000000..895ca459087b
--- /dev/null
+++ b/drivers/media/i2c/tw9900.c
@@ -0,0 +1,777 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for the Techwell TW9900 multi-standard video decoder.
+ *
+ * Copyright (C) 2018 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (C) 2020 Maxime Chevallier <[email protected]>
+ * Copyright (C) 2023 Mehdi Djait <[email protected]>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <media/media-entity.h>
+#include <media/v4l2-async.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-subdev.h>
+
+#define TW9900_REG_CHIP_ID 0x00
+#define TW9900_REG_CHIP_STATUS 0x01
+#define TW9900_REG_CHIP_STATUS_VDLOSS BIT(7)
+#define TW9900_REG_CHIP_STATUS_HLOCK BIT(6)
+#define TW9900_REG_OUT_FMT_CTL 0x03
+#define TW9900_REG_OUT_FMT_CTL_STANDBY 0xA7
+#define TW9900_REG_OUT_FMT_CTL_STREAMING 0xA0
+#define TW9900_REG_CKHY_HSDLY 0x04
+#define TW9900_REG_OUT_CTRL_I 0x05
+#define TW9900_REG_ANALOG_CTL 0x06
+#define TW9900_REG_CROP_HI 0x07
+#define TW9900_REG_VDELAY_LO 0x08
+#define TW9900_REG_VACTIVE_LO 0x09
+#define TW9900_REG_HACTIVE_LO 0x0B
+#define TW9900_REG_CNTRL1 0x0C
+#define TW9900_REG_BRIGHT_CTL 0x10
+#define TW9900_REG_CONTRAST_CTL 0x11
+#define TW9900_REG_VBI_CNTL 0x19
+#define TW9900_REG_ANAL_CTL_II 0x1A
+#define TW9900_REG_OUT_CTRL_II 0x1B
+#define TW9900_REG_STD 0x1C
+#define TW9900_REG_STD_AUTO_PROGRESS BIT(7)
+#define TW9900_STDNOW_MASK GENMASK(6, 4)
+#define TW9900_REG_STDR 0x1D
+#define TW9900_REG_MISSCNT 0x26
+#define TW9900_REG_MISC_CTL_II 0x2F
+#define TW9900_REG_VVBI 0x55
+#define TW9900_CHIP_ID 0x00
+#define TW9900_STD_NTSC_M 0
+#define TW9900_STD_PAL_BDGHI 1
+#define TW9900_STD_AUTO 7
+#define TW9900_VIDEO_POLL_TRIES 20
+
+struct regval {
+ u8 addr;
+ u8 val;
+};
+
+struct tw9900_mode {
+ u32 width;
+ u32 height;
+ u32 std;
+ const struct regval *reg_list;
+ int n_regs;
+};
+
+struct tw9900 {
+ struct i2c_client *client;
+ struct gpio_desc *reset_gpio;
+ struct regulator *regulator;
+
+ struct v4l2_subdev subdev;
+ struct v4l2_ctrl_handler hdl;
+ struct media_pad pad;
+
+ /* Serialize access to hardware and global state. */
+ struct mutex mutex;
+
+ bool streaming;
+ const struct tw9900_mode *cur_mode;
+};
+
+#define to_tw9900(sd) container_of(sd, struct tw9900, subdev)
+
+static const struct regval tw9900_init_regs[] = {
+ { TW9900_REG_MISC_CTL_II, 0xE6 },
+ { TW9900_REG_MISSCNT, 0x24 },
+ { TW9900_REG_OUT_FMT_CTL, 0xA7 },
+ { TW9900_REG_ANAL_CTL_II, 0x0A },
+ { TW9900_REG_VDELAY_LO, 0x19 },
+ { TW9900_REG_STD, 0x00 },
+ { TW9900_REG_VACTIVE_LO, 0xF0 },
+ { TW9900_REG_STD, 0x07 },
+ { TW9900_REG_CKHY_HSDLY, 0x00 },
+ { TW9900_REG_ANALOG_CTL, 0x80 },
+ { TW9900_REG_CNTRL1, 0xDC },
+ { TW9900_REG_OUT_CTRL_I, 0x98 },
+};
+
+static const struct regval tw9900_pal_regs[] = {
+ { TW9900_REG_STD, 0x01 },
+};
+
+static const struct regval tw9900_ntsc_regs[] = {
+ { TW9900_REG_OUT_FMT_CTL, 0xA4 },
+ { TW9900_REG_VDELAY_LO, 0x12 },
+ { TW9900_REG_VACTIVE_LO, 0xF0 },
+ { TW9900_REG_CROP_HI, 0x02 },
+ { TW9900_REG_HACTIVE_LO, 0xD0 },
+ { TW9900_REG_VBI_CNTL, 0x01 },
+ { TW9900_REG_STD, 0x00 },
+};
+
+static const struct tw9900_mode supported_modes[] = {
+ {
+ .width = 720,
+ .height = 480,
+ .std = V4L2_STD_NTSC,
+ .reg_list = tw9900_ntsc_regs,
+ .n_regs = ARRAY_SIZE(tw9900_ntsc_regs),
+ },
+ {
+ .width = 720,
+ .height = 576,
+ .std = V4L2_STD_PAL,
+ .reg_list = tw9900_pal_regs,
+ .n_regs = ARRAY_SIZE(tw9900_pal_regs),
+ },
+};
+
+static int tw9900_write_reg(struct i2c_client *client, u8 reg, u8 val)
+{
+ int ret;
+
+ ret = i2c_smbus_write_byte_data(client, reg, val);
+ if (ret < 0)
+ dev_err(&client->dev, "write reg error: %d\n", ret);
+
+ return ret;
+}
+
+static int tw9900_write_array(struct i2c_client *client,
+ const struct regval *regs, int n_regs)
+{
+ int i, ret = 0;
+
+ for (i = 0; i < n_regs; i++) {
+ ret = tw9900_write_reg(client, regs[i].addr, regs[i].val);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int tw9900_read_reg(struct i2c_client *client, u8 reg)
+{
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(client, reg);
+ if (ret < 0)
+ dev_err(&client->dev, "read reg error: %d\n", ret);
+
+ return ret;
+}
+
+static void tw9900_fill_fmt(const struct tw9900_mode *mode,
+ struct v4l2_mbus_framefmt *fmt)
+{
+ fmt->code = MEDIA_BUS_FMT_UYVY8_2X8;
+ fmt->width = mode->width;
+ fmt->height = mode->height;
+ fmt->field = V4L2_FIELD_NONE;
+ fmt->quantization = V4L2_QUANTIZATION_DEFAULT;
+ fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
+ fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(V4L2_COLORSPACE_SMPTE170M);
+ fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(V4L2_COLORSPACE_SMPTE170M);
+}
+
+static int tw9900_get_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state,
+ struct v4l2_subdev_format *fmt)
+{
+ struct tw9900 *tw9900 = to_tw9900(sd);
+ struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format;
+
+ mutex_lock(&tw9900->mutex);
+ tw9900_fill_fmt(tw9900->cur_mode, mbus_fmt);
+ mutex_unlock(&tw9900->mutex);
+
+ return 0;
+}
+
+static int tw9900_set_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state,
+ struct v4l2_subdev_format *fmt)
+{
+ struct tw9900 *tw9900 = to_tw9900(sd);
+ struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format;
+
+ mutex_lock(&tw9900->mutex);
+
+ if (tw9900->streaming) {
+ mutex_unlock(&tw9900->mutex);
+ return -EBUSY;
+ }
+
+ tw9900_fill_fmt(tw9900->cur_mode, mbus_fmt);
+
+ mutex_unlock(&tw9900->mutex);
+
+ return 0;
+}
+
+static int tw9900_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ if (code->index > 0)
+ return -EINVAL;
+
+ code->code = MEDIA_BUS_FMT_UYVY8_2X8;
+
+ return 0;
+}
+
+static int tw9900_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct tw9900 *tw9900 = container_of(ctrl->handler, struct tw9900, hdl);
+ int ret;
+
+ if (pm_runtime_suspended(&tw9900->client->dev))
+ return 0;
+
+ /* v4l2_ctrl_lock() locks tw9900->mutex. */
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ ret = tw9900_write_reg(tw9900->client, TW9900_REG_BRIGHT_CTL,
+ (u8)ctrl->val);
+ break;
+ case V4L2_CID_CONTRAST:
+ ret = tw9900_write_reg(tw9900->client, TW9900_REG_CONTRAST_CTL,
+ (u8)ctrl->val);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static int tw9900_s_stream(struct v4l2_subdev *sd, int on)
+{
+ struct tw9900 *tw9900 = to_tw9900(sd);
+ struct i2c_client *client = tw9900->client;
+ int ret;
+
+ mutex_lock(&tw9900->mutex);
+
+ if (tw9900->streaming == on) {
+ mutex_unlock(&tw9900->mutex);
+ return 0;
+ }
+
+ mutex_unlock(&tw9900->mutex);
+
+ if (on) {
+ ret = pm_runtime_resume_and_get(&client->dev);
+ if (ret < 0)
+ return ret;
+
+ mutex_lock(&tw9900->mutex);
+
+ ret = __v4l2_ctrl_handler_setup(sd->ctrl_handler);
+ if (ret)
+ goto err_unlock;
+
+ ret = tw9900_write_array(tw9900->client,
+ tw9900->cur_mode->reg_list,
+ tw9900->cur_mode->n_regs);
+ if (ret)
+ goto err_unlock;
+
+ ret = tw9900_write_reg(client, TW9900_REG_OUT_FMT_CTL,
+ TW9900_REG_OUT_FMT_CTL_STREAMING);
+ if (ret)
+ goto err_unlock;
+
+ tw9900->streaming = on;
+
+ mutex_unlock(&tw9900->mutex);
+
+ } else {
+ mutex_lock(&tw9900->mutex);
+
+ ret = tw9900_write_reg(client, TW9900_REG_OUT_FMT_CTL,
+ TW9900_REG_OUT_FMT_CTL_STANDBY);
+ if (ret)
+ goto err_unlock;
+
+ tw9900->streaming = on;
+
+ mutex_unlock(&tw9900->mutex);
+
+ pm_runtime_put(&client->dev);
+ }
+
+ return 0;
+
+err_unlock:
+ mutex_unlock(&tw9900->mutex);
+ pm_runtime_put(&client->dev);
+
+ return ret;
+}
+
+static int tw9900_subscribe_event(struct v4l2_subdev *sd,
+ struct v4l2_fh *fh,
+ struct v4l2_event_subscription *sub)
+{
+ switch (sub->type) {
+ case V4L2_EVENT_SOURCE_CHANGE:
+ return v4l2_src_change_event_subdev_subscribe(sd, fh, sub);
+ case V4L2_EVENT_CTRL:
+ return v4l2_ctrl_subdev_subscribe_event(sd, fh, sub);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int tw9900_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
+{
+ struct tw9900 *tw9900 = to_tw9900(sd);
+ const struct tw9900_mode *mode;
+ int i;
+
+ if (!(std & (V4L2_STD_NTSC | V4L2_STD_PAL)))
+ return -EINVAL;
+
+ for (i = 0; i < ARRAY_SIZE(supported_modes); i++)
+ if (supported_modes[i].std & std)
+ mode = &supported_modes[i];
+ if (!mode)
+ return -EINVAL;
+
+ mutex_lock(&tw9900->mutex);
+ tw9900->cur_mode = mode;
+ mutex_unlock(&tw9900->mutex);
+
+ return 0;
+}
+
+static int tw9900_get_stream_std(struct tw9900 *tw9900,
+ v4l2_std_id *std)
+{
+ int cur_std, ret;
+
+ lockdep_assert_held(&tw9900->mutex);
+
+ ret = tw9900_read_reg(tw9900->client, TW9900_REG_STD);
+ if (ret < 0) {
+ *std = V4L2_STD_UNKNOWN;
+ return ret;
+ }
+
+ cur_std = FIELD_GET(TW9900_STDNOW_MASK, ret);
+ switch (cur_std) {
+ case TW9900_STD_NTSC_M:
+ *std = V4L2_STD_NTSC;
+ break;
+ case TW9900_STD_PAL_BDGHI:
+ *std = V4L2_STD_PAL;
+ break;
+ case TW9900_STD_AUTO:
+ *std = V4L2_STD_UNKNOWN;
+ break;
+ default:
+ *std = V4L2_STD_UNKNOWN;
+ break;
+ }
+
+ return 0;
+}
+
+static int tw9900_g_std(struct v4l2_subdev *sd, v4l2_std_id *std)
+{
+ struct tw9900 *tw9900 = to_tw9900(sd);
+
+ mutex_lock(&tw9900->mutex);
+ *std = tw9900->cur_mode->std;
+ mutex_unlock(&tw9900->mutex);
+
+ return 0;
+}
+
+static int tw9900_start_autodetect(struct tw9900 *tw9900)
+{
+ int ret;
+
+ lockdep_assert_held(&tw9900->mutex);
+
+ ret = tw9900_write_reg(tw9900->client, TW9900_REG_STDR,
+ BIT(TW9900_STD_NTSC_M) |
+ BIT(TW9900_STD_PAL_BDGHI));
+ if (ret)
+ return ret;
+
+ ret = tw9900_write_reg(tw9900->client, TW9900_REG_STD,
+ TW9900_STD_AUTO);
+ if (ret)
+ return ret;
+
+ ret = tw9900_write_reg(tw9900->client, TW9900_REG_STDR,
+ BIT(TW9900_STD_NTSC_M) |
+ BIT(TW9900_STD_PAL_BDGHI) |
+ BIT(TW9900_STD_AUTO));
+ if (ret)
+ return ret;
+
+ /*
+ * Autodetect takes a while to start, and during the starting sequence
+ * the autodetection status is reported as done.
+ */
+ msleep(30);
+
+ return 0;
+}
+
+static int tw9900_detect_done(struct tw9900 *tw9900, bool *done)
+{
+ int ret;
+
+ lockdep_assert_held(&tw9900->mutex);
+
+ ret = tw9900_read_reg(tw9900->client, TW9900_REG_STD);
+ if (ret < 0)
+ return ret;
+
+ *done = !(ret & TW9900_REG_STD_AUTO_PROGRESS);
+
+ return 0;
+}
+
+static int tw9900_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
+{
+ struct tw9900 *tw9900 = to_tw9900(sd);
+ bool done = false;
+ int i, ret;
+
+ mutex_lock(&tw9900->mutex);
+
+ if (tw9900->streaming) {
+ mutex_unlock(&tw9900->mutex);
+ return -EBUSY;
+ }
+
+ mutex_unlock(&tw9900->mutex);
+
+ ret = pm_runtime_resume_and_get(&tw9900->client->dev);
+ if (ret < 0)
+ return ret;
+
+ mutex_lock(&tw9900->mutex);
+
+ ret = tw9900_start_autodetect(tw9900);
+ if (ret)
+ goto out_unlock;
+
+ for (i = 0; i < TW9900_VIDEO_POLL_TRIES; i++) {
+ ret = tw9900_detect_done(tw9900, &done);
+ if (ret)
+ goto out_unlock;
+
+ if (done)
+ break;
+
+ msleep(20);
+ }
+
+ if (!done) {
+ ret = -ETIMEDOUT;
+ goto out_unlock;
+ }
+
+ ret = tw9900_get_stream_std(tw9900, std);
+
+out_unlock:
+ mutex_unlock(&tw9900->mutex);
+ pm_runtime_put(&tw9900->client->dev);
+
+ return ret;
+}
+
+static int tw9900_g_tvnorms(struct v4l2_subdev *sd, v4l2_std_id *std)
+{
+ *std = V4L2_STD_NTSC | V4L2_STD_PAL;
+
+ return 0;
+}
+
+static int tw9900_g_input_status(struct v4l2_subdev *sd, u32 *status)
+{
+ struct tw9900 *tw9900 = to_tw9900(sd);
+ int ret;
+
+ mutex_lock(&tw9900->mutex);
+
+ if (tw9900->streaming) {
+ mutex_unlock(&tw9900->mutex);
+ return -EBUSY;
+ }
+
+ mutex_unlock(&tw9900->mutex);
+
+ *status = V4L2_IN_ST_NO_SIGNAL;
+
+ ret = pm_runtime_resume_and_get(&tw9900->client->dev);
+ if (ret < 0)
+ return ret;
+
+ mutex_lock(&tw9900->mutex);
+ ret = tw9900_read_reg(tw9900->client, TW9900_REG_CHIP_STATUS);
+ mutex_unlock(&tw9900->mutex);
+
+ pm_runtime_put(&tw9900->client->dev);
+
+ if (ret < 0)
+ return ret;
+
+ *status = ret & TW9900_REG_CHIP_STATUS_HLOCK ? 0 : V4L2_IN_ST_NO_SIGNAL;
+
+ return 0;
+}
+
+static const struct v4l2_subdev_core_ops tw9900_core_ops = {
+ .subscribe_event = tw9900_subscribe_event,
+ .unsubscribe_event = v4l2_event_subdev_unsubscribe,
+};
+
+static const struct v4l2_subdev_video_ops tw9900_video_ops = {
+ .s_std = tw9900_s_std,
+ .g_std = tw9900_g_std,
+ .querystd = tw9900_querystd,
+ .g_tvnorms = tw9900_g_tvnorms,
+ .g_input_status = tw9900_g_input_status,
+ .s_stream = tw9900_s_stream,
+};
+
+static const struct v4l2_subdev_pad_ops tw9900_pad_ops = {
+ .enum_mbus_code = tw9900_enum_mbus_code,
+ .get_fmt = tw9900_get_fmt,
+ .set_fmt = tw9900_set_fmt,
+};
+
+static const struct v4l2_subdev_ops tw9900_subdev_ops = {
+ .core = &tw9900_core_ops,
+ .video = &tw9900_video_ops,
+ .pad = &tw9900_pad_ops,
+};
+
+static const struct v4l2_ctrl_ops tw9900_ctrl_ops = {
+ .s_ctrl = tw9900_s_ctrl,
+};
+
+static int tw9900_check_id(struct tw9900 *tw9900,
+ struct i2c_client *client)
+{
+ struct device *dev = &tw9900->client->dev;
+ int ret;
+
+ ret = pm_runtime_resume_and_get(&tw9900->client->dev);
+ if (ret < 0)
+ return ret;
+
+ mutex_lock(&tw9900->mutex);
+ ret = tw9900_read_reg(client, TW9900_CHIP_ID);
+ mutex_unlock(&tw9900->mutex);
+
+ pm_runtime_put(&tw9900->client->dev);
+
+ if (ret < 0)
+ return ret;
+
+ if (ret != TW9900_CHIP_ID) {
+ dev_err(dev, "Unexpected decoder id %#x\n", ret);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int tw9900_runtime_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct tw9900 *tw9900 = to_tw9900(sd);
+ int ret;
+
+ mutex_lock(&tw9900->mutex);
+
+ if (tw9900->reset_gpio)
+ gpiod_set_value_cansleep(tw9900->reset_gpio, 1);
+
+ ret = regulator_enable(tw9900->regulator);
+ if (ret < 0)
+ return ret;
+
+ usleep_range(50000, 52000);
+
+ if (tw9900->reset_gpio)
+ gpiod_set_value_cansleep(tw9900->reset_gpio, 0);
+
+ usleep_range(1000, 2000);
+
+ ret = tw9900_write_array(tw9900->client, tw9900_init_regs,
+ ARRAY_SIZE(tw9900_init_regs));
+
+ mutex_unlock(&tw9900->mutex);
+
+ /* This sleep is needed for the Horizontal Sync PLL to lock. */
+ msleep(300);
+
+ return ret;
+}
+
+static int tw9900_runtime_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct tw9900 *tw9900 = to_tw9900(sd);
+
+ mutex_lock(&tw9900->mutex);
+
+ if (tw9900->reset_gpio)
+ gpiod_set_value_cansleep(tw9900->reset_gpio, 1);
+
+ regulator_disable(tw9900->regulator);
+
+ mutex_unlock(&tw9900->mutex);
+
+ return 0;
+}
+
+static int tw9900_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct v4l2_ctrl_handler *hdl;
+ struct tw9900 *tw9900;
+ int ret = 0;
+
+ tw9900 = devm_kzalloc(dev, sizeof(*tw9900), GFP_KERNEL);
+ if (!tw9900)
+ return -ENOMEM;
+
+ tw9900->client = client;
+ tw9900->cur_mode = &supported_modes[0];
+
+ tw9900->reset_gpio = devm_gpiod_get_optional(dev, "reset",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(tw9900->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(tw9900->reset_gpio),
+ "Failed to get reset gpio\n");
+
+ tw9900->regulator = devm_regulator_get(&tw9900->client->dev, "vdd");
+ if (IS_ERR(tw9900->regulator))
+ return dev_err_probe(dev, PTR_ERR(tw9900->regulator),
+ "Failed to get power regulator\n");
+
+ v4l2_i2c_subdev_init(&tw9900->subdev, client, &tw9900_subdev_ops);
+ tw9900->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
+ V4L2_SUBDEV_FL_HAS_EVENTS;
+
+ mutex_init(&tw9900->mutex);
+
+ hdl = &tw9900->hdl;
+
+ ret = v4l2_ctrl_handler_init(hdl, 2);
+ if (ret)
+ goto err_destory_mutex;
+
+ hdl->lock = &tw9900->mutex;
+
+ v4l2_ctrl_new_std(hdl, &tw9900_ctrl_ops, V4L2_CID_BRIGHTNESS,
+ -128, 127, 1, 0);
+ v4l2_ctrl_new_std(hdl, &tw9900_ctrl_ops, V4L2_CID_CONTRAST,
+ 0, 255, 1, 0x60);
+
+ tw9900->subdev.ctrl_handler = hdl;
+ if (hdl->error) {
+ ret = hdl->error;
+ goto err_free_handler;
+ }
+
+ tw9900->pad.flags = MEDIA_PAD_FL_SOURCE;
+ tw9900->subdev.entity.function = MEDIA_ENT_F_DV_DECODER;
+
+ ret = media_entity_pads_init(&tw9900->subdev.entity, 1, &tw9900->pad);
+ if (ret < 0)
+ goto err_free_handler;
+
+ pm_runtime_set_suspended(dev);
+ pm_runtime_enable(dev);
+
+ ret = tw9900_check_id(tw9900, client);
+ if (ret)
+ goto err_disable_pm;
+
+ ret = v4l2_async_register_subdev(&tw9900->subdev);
+ if (ret) {
+ dev_err(dev, "v4l2 async register subdev failed\n");
+ goto err_disable_pm;
+ }
+
+ return 0;
+
+err_disable_pm:
+ pm_runtime_disable(dev);
+ media_entity_cleanup(&tw9900->subdev.entity);
+err_free_handler:
+ v4l2_ctrl_handler_free(hdl);
+err_destory_mutex:
+ mutex_destroy(&tw9900->mutex);
+
+ return ret;
+}
+
+static void tw9900_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct tw9900 *tw9900 = to_tw9900(sd);
+
+ v4l2_async_unregister_subdev(sd);
+ media_entity_cleanup(&sd->entity);
+ v4l2_ctrl_handler_free(sd->ctrl_handler);
+
+ pm_runtime_disable(&client->dev);
+
+ mutex_destroy(&tw9900->mutex);
+}
+
+static const struct dev_pm_ops tw9900_pm_ops = {
+ .runtime_suspend = tw9900_runtime_suspend,
+ .runtime_resume = tw9900_runtime_resume,
+};
+
+static const struct i2c_device_id tw9900_id[] = {
+ { "tw9900", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tw9900_id);
+
+static const struct of_device_id tw9900_of_match[] = {
+ { .compatible = "techwell,tw9900" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, tw9900_of_match);
+
+static struct i2c_driver tw9900_i2c_driver = {
+ .driver = {
+ .name = "tw9900",
+ .pm = &tw9900_pm_ops,
+ .of_match_table = tw9900_of_match,
+ },
+ .probe = tw9900_probe,
+ .remove = tw9900_remove,
+ .id_table = tw9900_id,
+};
+
+module_i2c_driver(tw9900_i2c_driver);
+
+MODULE_DESCRIPTION("tw9900 decoder driver");
+MODULE_LICENSE("GPL");
--
2.41.0
Hi Mehdi,
kernel test robot noticed the following build warnings:
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Mehdi-Djait/dt-bindings-vendor-prefixes-Add-techwell-vendor-prefix/20231117-234411
base: git://linuxtv.org/media_tree.git master
patch link: https://lore.kernel.org/r/dc65a89e7803782a75bf663158e031356ef7cb1a.1700235276.git.mehdi.djait%40bootlin.com
patch subject: [PATCH v9 3/3] media: i2c: Introduce a driver for the Techwell TW9900 decoder
config: powerpc-randconfig-r071-20231122 (https://download.01.org/0day-ci/archive/20231122/[email protected]/config)
compiler: powerpc-linux-gcc (GCC) 13.2.0
reproduce: (https://download.01.org/0day-ci/archive/20231122/[email protected]/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Reported-by: Dan Carpenter <[email protected]>
| Closes: https://lore.kernel.org/r/[email protected]/
New smatch warnings:
drivers/media/i2c/tw9900.c:628 tw9900_runtime_resume() warn: inconsistent returns '&tw9900->mutex'.
Old smatch warnings:
drivers/media/i2c/tw9900.c:348 tw9900_s_std() error: uninitialized symbol 'mode'.
vim +628 drivers/media/i2c/tw9900.c
cf24af11e0a74c Mehdi Djait 2023-11-17 597 static int tw9900_runtime_resume(struct device *dev)
cf24af11e0a74c Mehdi Djait 2023-11-17 598 {
cf24af11e0a74c Mehdi Djait 2023-11-17 599 struct i2c_client *client = to_i2c_client(dev);
cf24af11e0a74c Mehdi Djait 2023-11-17 600 struct v4l2_subdev *sd = i2c_get_clientdata(client);
cf24af11e0a74c Mehdi Djait 2023-11-17 601 struct tw9900 *tw9900 = to_tw9900(sd);
cf24af11e0a74c Mehdi Djait 2023-11-17 602 int ret;
cf24af11e0a74c Mehdi Djait 2023-11-17 603
cf24af11e0a74c Mehdi Djait 2023-11-17 604 mutex_lock(&tw9900->mutex);
cf24af11e0a74c Mehdi Djait 2023-11-17 605
cf24af11e0a74c Mehdi Djait 2023-11-17 606 if (tw9900->reset_gpio)
cf24af11e0a74c Mehdi Djait 2023-11-17 607 gpiod_set_value_cansleep(tw9900->reset_gpio, 1);
cf24af11e0a74c Mehdi Djait 2023-11-17 608
cf24af11e0a74c Mehdi Djait 2023-11-17 609 ret = regulator_enable(tw9900->regulator);
cf24af11e0a74c Mehdi Djait 2023-11-17 610 if (ret < 0)
cf24af11e0a74c Mehdi Djait 2023-11-17 611 return ret;
mutex_unlock(&tw9900->mutex) before returning.
cf24af11e0a74c Mehdi Djait 2023-11-17 612
cf24af11e0a74c Mehdi Djait 2023-11-17 613 usleep_range(50000, 52000);
cf24af11e0a74c Mehdi Djait 2023-11-17 614
cf24af11e0a74c Mehdi Djait 2023-11-17 615 if (tw9900->reset_gpio)
cf24af11e0a74c Mehdi Djait 2023-11-17 616 gpiod_set_value_cansleep(tw9900->reset_gpio, 0);
cf24af11e0a74c Mehdi Djait 2023-11-17 617
cf24af11e0a74c Mehdi Djait 2023-11-17 618 usleep_range(1000, 2000);
cf24af11e0a74c Mehdi Djait 2023-11-17 619
cf24af11e0a74c Mehdi Djait 2023-11-17 620 ret = tw9900_write_array(tw9900->client, tw9900_init_regs,
cf24af11e0a74c Mehdi Djait 2023-11-17 621 ARRAY_SIZE(tw9900_init_regs));
cf24af11e0a74c Mehdi Djait 2023-11-17 622
cf24af11e0a74c Mehdi Djait 2023-11-17 623 mutex_unlock(&tw9900->mutex);
cf24af11e0a74c Mehdi Djait 2023-11-17 624
cf24af11e0a74c Mehdi Djait 2023-11-17 625 /* This sleep is needed for the Horizontal Sync PLL to lock. */
cf24af11e0a74c Mehdi Djait 2023-11-17 626 msleep(300);
cf24af11e0a74c Mehdi Djait 2023-11-17 627
cf24af11e0a74c Mehdi Djait 2023-11-17 @628 return ret;
cf24af11e0a74c Mehdi Djait 2023-11-17 629 }
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
Hi Mehdi,
On Fri 17 Nov 23, 16:42, Mehdi Djait wrote:
> The Techwell video decoder supports PAL, NTSC standards and
> has a parallel BT.656 output interface.
>
> This commit adds support for this device, with basic support
> for NTSC and PAL, along with brightness and contrast controls.
>
> The TW9900 is capable of automatic standard detection. This
> driver is implemented with support for PAL and NTSC
> autodetection.
Very nice work on this iteration, I am quite happy with it!
There is just one cosmetic comment below. With that fixed, you can add my:
Reviewed-by: Paul Kocialkowski <[email protected]>
Cheers,
Paul
> Signed-off-by: Mehdi Djait <[email protected]>
> ---
> MAINTAINERS | 6 +
> drivers/media/i2c/Kconfig | 15 +
> drivers/media/i2c/Makefile | 1 +
> drivers/media/i2c/tw9900.c | 777 +++++++++++++++++++++++++++++++++++++
> 4 files changed, 799 insertions(+)
> create mode 100644 drivers/media/i2c/tw9900.c
[...]
> diff --git a/drivers/media/i2c/tw9900.c b/drivers/media/i2c/tw9900.c
> new file mode 100644
> index 000000000000..895ca459087b
> --- /dev/null
> +++ b/drivers/media/i2c/tw9900.c
> @@ -0,0 +1,777 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Driver for the Techwell TW9900 multi-standard video decoder.
> + *
> + * Copyright (C) 2018 Fuzhou Rockchip Electronics Co., Ltd.
> + * Copyright (C) 2020 Maxime Chevallier <[email protected]>
> + * Copyright (C) 2023 Mehdi Djait <[email protected]>
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
> +#include <media/media-entity.h>
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-subdev.h>
> +
> +#define TW9900_REG_CHIP_ID 0x00
> +#define TW9900_REG_CHIP_STATUS 0x01
> +#define TW9900_REG_CHIP_STATUS_VDLOSS BIT(7)
> +#define TW9900_REG_CHIP_STATUS_HLOCK BIT(6)
> +#define TW9900_REG_OUT_FMT_CTL 0x03
> +#define TW9900_REG_OUT_FMT_CTL_STANDBY 0xA7
> +#define TW9900_REG_OUT_FMT_CTL_STREAMING 0xA0
> +#define TW9900_REG_CKHY_HSDLY 0x04
> +#define TW9900_REG_OUT_CTRL_I 0x05
> +#define TW9900_REG_ANALOG_CTL 0x06
> +#define TW9900_REG_CROP_HI 0x07
> +#define TW9900_REG_VDELAY_LO 0x08
> +#define TW9900_REG_VACTIVE_LO 0x09
> +#define TW9900_REG_HACTIVE_LO 0x0B
> +#define TW9900_REG_CNTRL1 0x0C
> +#define TW9900_REG_BRIGHT_CTL 0x10
> +#define TW9900_REG_CONTRAST_CTL 0x11
> +#define TW9900_REG_VBI_CNTL 0x19
> +#define TW9900_REG_ANAL_CTL_II 0x1A
> +#define TW9900_REG_OUT_CTRL_II 0x1B
> +#define TW9900_REG_STD 0x1C
> +#define TW9900_REG_STD_AUTO_PROGRESS BIT(7)
> +#define TW9900_STDNOW_MASK GENMASK(6, 4)
> +#define TW9900_REG_STDR 0x1D
> +#define TW9900_REG_MISSCNT 0x26
> +#define TW9900_REG_MISC_CTL_II 0x2F
> +#define TW9900_REG_VVBI 0x55
Please reintroduce the newline here...
> +#define TW9900_CHIP_ID 0x00
> +#define TW9900_STD_NTSC_M 0
> +#define TW9900_STD_PAL_BDGHI 1
> +#define TW9900_STD_AUTO 7
... and here to separate between register definitions and more general values.
> +#define TW9900_VIDEO_POLL_TRIES 20
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com