The dma ops from the parent DWC device are not getting passed to the
child xhci-hcd device. This patch makes use of
platform_device_register_full to set the DMA ops. For the DT/OF case,
dma_ops were still null after the the device register, so
of_dma_configure is called in only the OF case.
Signed-off-by: Adam Wallis <[email protected]>
---
drivers/usb/dwc3/host.c | 39 +++++++++++++++++----------------------
1 file changed, 17 insertions(+), 22 deletions(-)
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index 76f0b0d..662e9e2 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -16,6 +16,7 @@
*/
#include <linux/platform_device.h>
+#include <linux/of_platform.h>
#include "core.h"
@@ -56,6 +57,7 @@ int dwc3_host_init(struct dwc3 *dwc)
{
struct property_entry props[3];
struct platform_device *xhci;
+ struct platform_device_info dwc_plat_info = {};
int ret, irq;
struct resource *res;
struct platform_device *dwc3_pdev = to_platform_device(dwc->dev);
@@ -79,22 +81,22 @@ int dwc3_host_init(struct dwc3 *dwc)
dwc->xhci_resources[1].flags = res->flags;
dwc->xhci_resources[1].name = res->name;
- xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO);
- if (!xhci) {
- dev_err(dwc->dev, "couldn't allocate xHCI device\n");
- return -ENOMEM;
- }
+ dwc_plat_info.name = "xhci-hcd";
+ dwc_plat_info.parent = dwc->dev;
+ dwc_plat_info.res = dwc->xhci_resources;
+ dwc_plat_info.num_res = DWC3_XHCI_RESOURCES_NUM;
+ dwc_plat_info.fwnode = dwc->dev->fwnode;
+ dwc_plat_info.dma_mask = *dwc->dev->dma_mask;
- xhci->dev.parent = dwc->dev;
+ xhci = platform_device_register_full(&dwc_plat_info);
+ if (IS_ERR(xhci)) {
+ dev_err(dwc->dev, "failed to register xHCI device\n");
+ return PTR_ERR(xhci);
+ }
dwc->xhci = xhci;
-
- ret = platform_device_add_resources(xhci, dwc->xhci_resources,
- DWC3_XHCI_RESOURCES_NUM);
- if (ret) {
- dev_err(dwc->dev, "couldn't add resources to xHCI device\n");
- goto err1;
- }
+ if (dwc->dev->of_node)
+ of_dma_configure(&xhci->dev, dwc->dev->of_node);
memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props));
@@ -117,7 +119,7 @@ int dwc3_host_init(struct dwc3 *dwc)
ret = platform_device_add_properties(xhci, props);
if (ret) {
dev_err(dwc->dev, "failed to add properties to xHCI\n");
- goto err1;
+ goto err;
}
}
@@ -126,19 +128,12 @@ int dwc3_host_init(struct dwc3 *dwc)
phy_create_lookup(dwc->usb3_generic_phy, "usb3-phy",
dev_name(dwc->dev));
- ret = platform_device_add(xhci);
- if (ret) {
- dev_err(dwc->dev, "failed to register xHCI device\n");
- goto err2;
- }
-
return 0;
-err2:
+err:
phy_remove_lookup(dwc->usb2_generic_phy, "usb2-phy",
dev_name(dwc->dev));
phy_remove_lookup(dwc->usb3_generic_phy, "usb3-phy",
dev_name(dwc->dev));
-err1:
platform_device_put(xhci);
return ret;
}
--
Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
On 08/25/2017 01:02 PM, Adam Wallis wrote:
> The dma ops from the parent DWC device are not getting passed to the
> child xhci-hcd device. This patch makes use of
> platform_device_register_full to set the DMA ops. For the DT/OF case,
> dma_ops were still null after the the device register, so
> of_dma_configure is called in only the OF case.
>
> Signed-off-by: Adam Wallis <[email protected]>
Hm. There were set of fixes in this area recently which actually removed
settings you are going to restore
4c39d4b usb: xhci: use bus->sysdev for DMA configuration
d64ff40 usb: dwc3: use bus->sysdev for DMA configuration
> ---
> drivers/usb/dwc3/host.c | 39 +++++++++++++++++----------------------
> 1 file changed, 17 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
> index 76f0b0d..662e9e2 100644
> --- a/drivers/usb/dwc3/host.c
> +++ b/drivers/usb/dwc3/host.c
> @@ -16,6 +16,7 @@
> */
>
> #include <linux/platform_device.h>
> +#include <linux/of_platform.h>
>
> #include "core.h"
>
> @@ -56,6 +57,7 @@ int dwc3_host_init(struct dwc3 *dwc)
> {
> struct property_entry props[3];
> struct platform_device *xhci;
> + struct platform_device_info dwc_plat_info = {};
> int ret, irq;
> struct resource *res;
> struct platform_device *dwc3_pdev = to_platform_device(dwc->dev);
> @@ -79,22 +81,22 @@ int dwc3_host_init(struct dwc3 *dwc)
> dwc->xhci_resources[1].flags = res->flags;
> dwc->xhci_resources[1].name = res->name;
>
> - xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO);
> - if (!xhci) {
> - dev_err(dwc->dev, "couldn't allocate xHCI device\n");
> - return -ENOMEM;
> - }
> + dwc_plat_info.name = "xhci-hcd";
> + dwc_plat_info.parent = dwc->dev;
> + dwc_plat_info.res = dwc->xhci_resources;
> + dwc_plat_info.num_res = DWC3_XHCI_RESOURCES_NUM;
> + dwc_plat_info.fwnode = dwc->dev->fwnode;
> + dwc_plat_info.dma_mask = *dwc->dev->dma_mask;
>
> - xhci->dev.parent = dwc->dev;
> + xhci = platform_device_register_full(&dwc_plat_info);
> + if (IS_ERR(xhci)) {
> + dev_err(dwc->dev, "failed to register xHCI device\n");
> + return PTR_ERR(xhci);
> + }
>
> dwc->xhci = xhci;
> -
> - ret = platform_device_add_resources(xhci, dwc->xhci_resources,
> - DWC3_XHCI_RESOURCES_NUM);
> - if (ret) {
> - dev_err(dwc->dev, "couldn't add resources to xHCI device\n");
> - goto err1;
> - }
> + if (dwc->dev->of_node)
> + of_dma_configure(&xhci->dev, dwc->dev->of_node);
>
> memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props));
>
> @@ -117,7 +119,7 @@ int dwc3_host_init(struct dwc3 *dwc)
> ret = platform_device_add_properties(xhci, props);
> if (ret) {
> dev_err(dwc->dev, "failed to add properties to xHCI\n");
> - goto err1;
> + goto err;
> }
> }
>
> @@ -126,19 +128,12 @@ int dwc3_host_init(struct dwc3 *dwc)
> phy_create_lookup(dwc->usb3_generic_phy, "usb3-phy",
> dev_name(dwc->dev));
>
> - ret = platform_device_add(xhci);
> - if (ret) {
> - dev_err(dwc->dev, "failed to register xHCI device\n");
> - goto err2;
> - }
> -
> return 0;
> -err2:
> +err:
> phy_remove_lookup(dwc->usb2_generic_phy, "usb2-phy",
> dev_name(dwc->dev));
> phy_remove_lookup(dwc->usb3_generic_phy, "usb3-phy",
> dev_name(dwc->dev));
> -err1:
> platform_device_put(xhci);
> return ret;
> }
>
--
regards,
-grygorii
Hi,
Adam Wallis <[email protected]> writes:
> The dma ops from the parent DWC device are not getting passed to the
> child xhci-hcd device. This patch makes use of
> platform_device_register_full to set the DMA ops. For the DT/OF case,
> dma_ops were still null after the the device register, so
> of_dma_configure is called in only the OF case.
>
> Signed-off-by: Adam Wallis <[email protected]>
you need to sysdev property, IMO.
--
balbi
On 8/28/2017 9:05 AM, Felipe Balbi wrote:
>
> Hi,
>
> Adam Wallis <[email protected]> writes:
>> The dma ops from the parent DWC device are not getting passed to the
>> child xhci-hcd device. This patch makes use of
>> platform_device_register_full to set the DMA ops. For the DT/OF case,
>> dma_ops were still null after the the device register, so
>> of_dma_configure is called in only the OF case.
>>
>> Signed-off-by: Adam Wallis <[email protected]>
>
> you need to sysdev property, IMO.
>
Thanks, good suggestion. I will test that out.
--
Adam Wallis
Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.
On 8/25/2017 7:03 PM, Grygorii Strashko wrote:
>
>
> On 08/25/2017 01:02 PM, Adam Wallis wrote:
>> The dma ops from the parent DWC device are not getting passed to the
>> child xhci-hcd device. This patch makes use of
>> platform_device_register_full to set the DMA ops. For the DT/OF case,
>> dma_ops were still null after the the device register, so
>> of_dma_configure is called in only the OF case.
>>
>> Signed-off-by: Adam Wallis <[email protected]>
>
> Hm. There were set of fixes in this area recently which actually removed
> settings you are going to restore
The set of fixes works for DWC if it is a child device, but in my testing, those
DMA settings do not get propagated to the created xHCI-hcd child device (which
is instantiated in dwc3_host_init). I see the same behavior with ACPI and
Device-Tree/OF boot.
>
> 4c39d4b usb: xhci: use bus->sysdev for DMA configuration
>
> d64ff40 usb: dwc3: use bus->sysdev for DMA configuration
>
>> ---
>> drivers/usb/dwc3/host.c | 39 +++++++++++++++++----------------------
>> 1 file changed, 17 insertions(+), 22 deletions(-)
>>
>> diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
>> index 76f0b0d..662e9e2 100644
>> --- a/drivers/usb/dwc3/host.c
>> +++ b/drivers/usb/dwc3/host.c
>> @@ -16,6 +16,7 @@
>> */
>> #include <linux/platform_device.h>
>> +#include <linux/of_platform.h>
>> #include "core.h"
>> @@ -56,6 +57,7 @@ int dwc3_host_init(struct dwc3 *dwc)
>> {
>> struct property_entry props[3];
>> struct platform_device *xhci;
>> + struct platform_device_info dwc_plat_info = {};
>> int ret, irq;
>> struct resource *res;
>> struct platform_device *dwc3_pdev = to_platform_device(dwc->dev);
>> @@ -79,22 +81,22 @@ int dwc3_host_init(struct dwc3 *dwc)
>> dwc->xhci_resources[1].flags = res->flags;
>> dwc->xhci_resources[1].name = res->name;
>> - xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO);
>> - if (!xhci) {
>> - dev_err(dwc->dev, "couldn't allocate xHCI device\n");
>> - return -ENOMEM;
>> - }
>> + dwc_plat_info.name = "xhci-hcd";
>> + dwc_plat_info.parent = dwc->dev;
>> + dwc_plat_info.res = dwc->xhci_resources;
>> + dwc_plat_info.num_res = DWC3_XHCI_RESOURCES_NUM;
>> + dwc_plat_info.fwnode = dwc->dev->fwnode;
>> + dwc_plat_info.dma_mask = *dwc->dev->dma_mask;
>> - xhci->dev.parent = dwc->dev;
>> + xhci = platform_device_register_full(&dwc_plat_info);
>> + if (IS_ERR(xhci)) {
>> + dev_err(dwc->dev, "failed to register xHCI device\n");
>> + return PTR_ERR(xhci);
>> + }
>> dwc->xhci = xhci;
>> -
>> - ret = platform_device_add_resources(xhci, dwc->xhci_resources,
>> - DWC3_XHCI_RESOURCES_NUM);
>> - if (ret) {
>> - dev_err(dwc->dev, "couldn't add resources to xHCI device\n");
>> - goto err1;
>> - }
>> + if (dwc->dev->of_node)
>> + of_dma_configure(&xhci->dev, dwc->dev->of_node);
>> memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props));
>> @@ -117,7 +119,7 @@ int dwc3_host_init(struct dwc3 *dwc)
>> ret = platform_device_add_properties(xhci, props);
>> if (ret) {
>> dev_err(dwc->dev, "failed to add properties to xHCI\n");
>> - goto err1;
>> + goto err;
>> }
>> }
>> @@ -126,19 +128,12 @@ int dwc3_host_init(struct dwc3 *dwc)
>> phy_create_lookup(dwc->usb3_generic_phy, "usb3-phy",
>> dev_name(dwc->dev));
>> - ret = platform_device_add(xhci);
>> - if (ret) {
>> - dev_err(dwc->dev, "failed to register xHCI device\n");
>> - goto err2;
>> - }
>> -
>> return 0;
>> -err2:
>> +err:
>> phy_remove_lookup(dwc->usb2_generic_phy, "usb2-phy",
>> dev_name(dwc->dev));
>> phy_remove_lookup(dwc->usb3_generic_phy, "usb3-phy",
>> dev_name(dwc->dev));
>> -err1:
>> platform_device_put(xhci);
>> return ret;
>> }
>>
>
--
Adam Wallis
Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.