Hi All,
I had written an additional input_handler :
static struct input_device_id pcraw_ids[] = {
{
.flags = INPUT_DEVICE_ID_MATCH_EVBIT,
.evbit = { BIT(EV_MSC) },
},
{ }, /* Terminating entry */
};
to get MSC_RAW events from the atkeyboard :
input_event (&atkbd->dev, EV_MSC, MSC_RAW, code)
But I only get these events :
input_event(&atkbd->dev, EV_MSC, MSC_SCAN, code);
I know the reason is in driver/input/input.c :
case EV_MSC:
if (code > MSC_MAX || !test_bit(code, dev->mscbit))
return;
if (dev->event) dev->event(dev, type, code, value);
break;
because of (driver/input/keyboard/atkbd.c):
atkbd->dev.mscbit[0] = atkbd->softraw ? BIT(MSC_SCAN) :
BIT(MSC_RAW) | BIT(MSC_SCAN);
I would like to change driver/input/input.c like this :
case EV_MSC:
if (code > MSC_MAX)
return;
if (test_bit(code, dev->mscbit))
if (dev->event) dev->event(dev, type, code, value);
break;
Any comments ? Maybe I misunderstand the concept of the input events. In
that case, please give me a short description or let me know were I can
find any documentation.
Best regards, Frank
On 2/8/07, Frank Salomon <[email protected]> wrote:
> Hi All,
>
> I had written an additional input_handler :
>
> static struct input_device_id pcraw_ids[] = {
> {
> .flags = INPUT_DEVICE_ID_MATCH_EVBIT,
> .evbit = { BIT(EV_MSC) },
> },
> { }, /* Terminating entry */
> };
>
> to get MSC_RAW events from the atkeyboard :
>
> input_event (&atkbd->dev, EV_MSC, MSC_RAW, code)
>
> But I only get these events :
>
> input_event(&atkbd->dev, EV_MSC, MSC_SCAN, code);
>
That is because by default atkbd uses software-emulated raw mode.
bootk with atkbd.softraw=0 or switch it off after boot through sysfs
attribute to get EV_MSC/MSC_RAW passed through).
> I know the reason is in driver/input/input.c :
>
> case EV_MSC:
> if (code > MSC_MAX || !test_bit(code, dev->mscbit))
> return;
>
> if (dev->event) dev->event(dev, type, code, value);
> break;
>
> because of (driver/input/keyboard/atkbd.c):
>
> atkbd->dev.mscbit[0] = atkbd->softraw ? BIT(MSC_SCAN) :
> BIT(MSC_RAW) | BIT(MSC_SCAN);
>
> I would like to change driver/input/input.c like this :
>
> case EV_MSC:
> if (code > MSC_MAX)
> return;
>
> if (test_bit(code, dev->mscbit))
> if (dev->event) dev->event(dev, type, code, value);
> break;
>
> Any comments ? Maybe I misunderstand the concept of the input events. In
> that case, please give me a short description or let me know were I can
> find any documentation.
>
No, input core should not pass any events device did not claim to support.
What are you trying to do though? Why are you interested in raw atkbd
events? What will your handler do with events from other input devices
that might emit raw events?
--
Dmitry
Hi Dmitry,
Dmitry Torokhov wrote:
> That is because by default atkbd uses software-emulated raw mode.
> bootk with atkbd.softraw=0 or switch it off after boot through sysfs
> attribute to get EV_MSC/MSC_RAW passed through).
Thank you for your advice, but I really don't know, what will be the
secondary effect if it will be switched off.
> No, input core should not pass any events device did not claim to support.
I am not sure, but I think the function input_event in
drivers/input/input.c has 2 tasks:
One is to send events to the device (first part: "switch (type){").
The other one is to send the events to the handler (second part:
"list_for_each_entry(handle, &dev->h_list, d_node)").
This is the reason why I had the idea of changing the code as I have
described it before.
With the current implementation, the device sends events to the handler.
But only events, known/claimed by the device are passed through to the
handler. I believe, this should be handled transparently.
> What are you trying to do though? Why are you interested in raw atkbd
> events? What will your handler do with events from other input devices
> that might emit raw events?
I have to connected special Point Of Sales Keyboards. Sometimes they are
sending none standard scan codes, only make codes and no break codes. I
had successfully implemented this in kernel version 2.4 and now I have
to do it in 2.6.
Best regards, Frank
Hi Frank,
On 2/9/07, Frank Salomon <[email protected]> wrote:
> Hi Dmitry,
>
> Dmitry Torokhov wrote:
>
> > That is because by default atkbd uses software-emulated raw mode.
> > bootk with atkbd.softraw=0 or switch it off after boot through sysfs
> > attribute to get EV_MSC/MSC_RAW passed through).
>
> Thank you for your advice, but I really don't know, what will be the
> secondary effect if it will be switched off.
>
> > No, input core should not pass any events device did not claim to support.
>
> I am not sure, but I think the function input_event in
> drivers/input/input.c has 2 tasks:
> One is to send events to the device (first part: "switch (type){").
>
> The other one is to send the events to the handler (second part:
> "list_for_each_entry(handle, &dev->h_list, d_node)").
>
> This is the reason why I had the idea of changing the code as I have
> described it before.
>
> With the current implementation, the device sends events to the handler.
> But only events, known/claimed by the device are passed through to the
> handler. I believe, this should be handled transparently.
>
Thta is the policy. Unless device claims to support certain events
they will not be passed through so there is no "surprises". This way
userspace applications can query device capabilities, classify them
and adjust behavior accordingly.
> > What are you trying to do though? Why are you interested in raw atkbd
> > events? What will your handler do with events from other input devices
> > that might emit raw events?
>
> I have to connected special Point Of Sales Keyboards. Sometimes they are
> sending none standard scan codes, only make codes and no break codes. I
> had successfully implemented this in kernel version 2.4 and now I have
> to do it in 2.6.
>
You probably want to use serio_raw module for that that provides raw
access to a PS/2 port (2.4-style) and possibly uinput driver to nject
parsed event stream back into kernel for standard delivery to
userspace apps.
--
Dmitry