This patch series does the below
--> Added support for CANFD FD frames
--> Fix Checkpatch reported warnings and checks
Appana Durga Kedareswara rao (6):
net: can: xilinx_can: Fix style issues
net: can: xilinx_can: Fix flags field initialization for axi can and
canps
net: can: xilinx_can: Add cantype parameter in xcan_devtype_data
struct
net: can: xilinx_can: Add support for CANFD FD frames
net: can: xilinx_can: Add SPDX license
net: can: xilinx_can: Fix kernel doc warnings
drivers/net/can/xilinx_can.c | 303 ++++++++++++++++++++++++++++++++++++-------
1 file changed, 257 insertions(+), 46 deletions(-)
--
2.7.4
This patch fixes below kernel doc warnings
warning: Function parameter or member 'priv' not described in
'xcan_write_frame'
warning: Function parameter or member 'skb' not described in
'xcan_start_xmit_fifo'
warning: Function parameter or member 'ndev' not described in
'xcan_start_xmit_fifo'
warning: Function parameter or member 'skb' not described in
'xcan_start_xmit_mailbox'
warning: Function parameter or member 'ndev' not described in
'xcan_start_xmit_mailbox'
warning: Function parameter or member 'priv' not described in
'xcan_rx_fifo_get_next_frame'
Signed-off-by: Appana Durga Kedareswara rao <[email protected]>
---
drivers/net/can/xilinx_can.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index e1544e0..ac6fcae 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -545,6 +545,7 @@ static int xcan_do_set_mode(struct net_device *ndev, enum can_mode mode)
/**
* xcan_write_frame - Write a frame to HW
+ * @priv: Driver private data structure
* @skb: sk_buff pointer that contains data to be Txed
* @frame_offset: Register offset to write the frame to
*/
@@ -625,6 +626,8 @@ static void xcan_write_frame(struct xcan_priv *priv, struct sk_buff *skb,
/**
* xcan_start_xmit_fifo - Starts the transmission (FIFO mode)
+ * @skb: sk_buff pointer that contains data to be Txed
+ * @ndev: Pointer to net_device structure
*
* Return: 0 on success, -ENOSPC if FIFO is full.
*/
@@ -661,6 +664,8 @@ static int xcan_start_xmit_fifo(struct sk_buff *skb, struct net_device *ndev)
/**
* xcan_start_xmit_mailbox - Starts the transmission (mailbox mode)
+ * @skb: sk_buff pointer that contains data to be Txed
+ * @ndev: Pointer to net_device structure
*
* Return: 0 on success, -ENOSPC if there is no space
*/
@@ -1148,6 +1153,7 @@ static void xcan_state_interrupt(struct net_device *ndev, u32 isr)
/**
* xcan_rx_fifo_get_next_frame - Get register offset of next RX frame
+ * @priv: Driver private data structure
*
* Return: Register offset of the next frame in RX FIFO.
*/
--
2.7.4
CANFD IP supports both CAN and CAN FD frames,
Existing driver supports only CAN frames, This patch
adds support for CAN FD frames.
Signed-off-by: Naga Sureshkumar Relli <[email protected]>
Signed-off-by: Appana Durga Kedareswara rao <[email protected]>
---
drivers/net/can/xilinx_can.c | 230 ++++++++++++++++++++++++++++++++++++++++---
1 file changed, 214 insertions(+), 16 deletions(-)
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index b45ece9..3d75a28 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -58,6 +58,10 @@ enum xcan_reg {
XCAN_AFR_OFFSET = 0x60, /* Acceptance Filter */
/* only on CAN FD cores */
+ XCAN_F_BRPR_OFFSET = 0x088, /* Data Phase Baud Rate
+ * Prescalar
+ */
+ XCAN_F_BTR_OFFSET = 0x08C, /* Data Phase Bit Timing */
XCAN_TRR_OFFSET = 0x0090, /* TX Buffer Ready Request */
XCAN_AFR_EXT_OFFSET = 0x00E0, /* Acceptance Filter */
XCAN_FSR_OFFSET = 0x00E8, /* RX FIFO Status */
@@ -70,6 +74,8 @@ enum xcan_reg {
#define XCAN_FRAME_DLC_OFFSET(frame_base) ((frame_base) + 0x04)
#define XCAN_FRAME_DW1_OFFSET(frame_base) ((frame_base) + 0x08)
#define XCAN_FRAME_DW2_OFFSET(frame_base) ((frame_base) + 0x0C)
+#define XCANFD_FRAME_DW_OFFSET(frame_base, n) (((frame_base) + 0x08) + \
+ ((n) * XCAN_CANFD_FRAME_SIZE))
#define XCAN_CANFD_FRAME_SIZE 0x48
#define XCAN_TXMSG_FRAME_OFFSET(n) (XCAN_TXMSG_BASE_OFFSET + \
@@ -128,6 +134,8 @@ enum xcan_reg {
#define XCAN_FSR_FL_MASK 0x00003F00 /* RX Fill Level */
#define XCAN_FSR_IRI_MASK 0x00000080 /* RX Increment Read Index */
#define XCAN_FSR_RI_MASK 0x0000001F /* RX Read Index */
+#define XCAN_DLCR_EDL_MASK 0x08000000 /* EDL Mask in DLC */
+#define XCAN_DLCR_BRS_MASK 0x04000000 /* BRS Mask in DLC */
/* CAN register bit shift - XCAN_<REG>_<BIT>_SHIFT */
#define XCAN_BTR_SJW_SHIFT 7 /* Synchronous jump width */
@@ -141,6 +149,7 @@ enum xcan_reg {
/* CAN frame length constants */
#define XCAN_FRAME_MAX_DATA_LEN 8
+#define XCANFD_DW_BYTES 4
#define XCAN_TIMEOUT (1 * HZ)
/* TX-FIFO-empty interrupt available */
@@ -221,6 +230,7 @@ static const struct can_bittiming_const xcan_bittiming_const = {
.brp_inc = 1,
};
+/* AXI CANFD Arbitration Bittiming constants as per AXI CANFD 1.0 spec */
static const struct can_bittiming_const xcan_bittiming_const_canfd = {
.name = DRIVER_NAME,
.tseg1_min = 1,
@@ -233,6 +243,20 @@ static const struct can_bittiming_const xcan_bittiming_const_canfd = {
.brp_inc = 1,
};
+/* AXI CANFD Data Bittiming constants as per AXI CANFD 1.0 specs */
+static struct can_bittiming_const xcan_data_bittiming_const_canfd = {
+ .name = DRIVER_NAME,
+ .tseg1_min = 1,
+ .tseg1_max = 16,
+ .tseg2_min = 1,
+ .tseg2_max = 8,
+ .sjw_max = 8,
+ .brp_min = 1,
+ .brp_max = 256,
+ .brp_inc = 1,
+};
+
+/* AXI CANFD 2.0 Arbitration Bittiming constants as per AXI CANFD 2.0 spec */
static const struct can_bittiming_const xcan_bittiming_const_canfd2 = {
.name = DRIVER_NAME,
.tseg1_min = 1,
@@ -245,6 +269,19 @@ static const struct can_bittiming_const xcan_bittiming_const_canfd2 = {
.brp_inc = 1,
};
+/* AXI CANFD 2.0 Data Bittiming constants as per AXI CANFD 2.0 spec */
+static struct can_bittiming_const xcan_data_bittiming_const_canfd2 = {
+ .name = DRIVER_NAME,
+ .tseg1_min = 1,
+ .tseg1_max = 32,
+ .tseg2_min = 1,
+ .tseg2_max = 16,
+ .sjw_max = 16,
+ .brp_min = 1,
+ .brp_max = 256,
+ .brp_inc = 1,
+};
+
/**
* xcan_write_reg_le - Write a value to the device register little endian
* @priv: Driver private data structure
@@ -359,6 +396,7 @@ static int xcan_set_bittiming(struct net_device *ndev)
{
struct xcan_priv *priv = netdev_priv(ndev);
struct can_bittiming *bt = &priv->can.bittiming;
+ struct can_bittiming *dbt = &priv->can.data_bittiming;
u32 btr0, btr1;
u32 is_config_mode;
@@ -388,6 +426,24 @@ static int xcan_set_bittiming(struct net_device *ndev)
priv->write_reg(priv, XCAN_BRPR_OFFSET, btr0);
priv->write_reg(priv, XCAN_BTR_OFFSET, btr1);
+ if (priv->devtype.cantype == XAXI_CANFD ||
+ priv->devtype.cantype == XAXI_CANFD_2_0) {
+ /* Setting Baud Rate prescalar value in F_BRPR Register */
+ btr0 = dbt->brp - 1;
+
+ /* Setting Time Segment 1 in BTR Register */
+ btr1 = dbt->prop_seg + bt->phase_seg1 - 1;
+
+ /* Setting Time Segment 2 in BTR Register */
+ btr1 |= (dbt->phase_seg2 - 1) << priv->devtype.btr_ts2_shift;
+
+ /* Setting Synchronous jump width in BTR Register */
+ btr1 |= (dbt->sjw - 1) << priv->devtype.btr_sjw_shift;
+
+ priv->write_reg(priv, XCAN_F_BRPR_OFFSET, btr0);
+ priv->write_reg(priv, XCAN_F_BTR_OFFSET, btr1);
+ }
+
netdev_dbg(ndev, "BRPR=0x%08x, BTR=0x%08x\n",
priv->read_reg(priv, XCAN_BRPR_OFFSET),
priv->read_reg(priv, XCAN_BTR_OFFSET));
@@ -506,7 +562,8 @@ static void xcan_write_frame(struct xcan_priv *priv, struct sk_buff *skb,
int frame_offset)
{
u32 id, dlc, data[2] = {0, 0};
- struct can_frame *cf = (struct can_frame *)skb->data;
+ struct canfd_frame *cf = (struct canfd_frame *)skb->data;
+ u32 ramoff, dwindex = 0, i;
/* Watch carefully on the bit sequence */
if (cf->can_id & CAN_EFF_FLAG) {
@@ -535,26 +592,44 @@ static void xcan_write_frame(struct xcan_priv *priv, struct sk_buff *skb,
id |= XCAN_IDR_SRR_MASK;
}
- dlc = cf->can_dlc << XCAN_DLCR_DLC_SHIFT;
-
- if (cf->can_dlc > 0)
- data[0] = be32_to_cpup((__be32 *)(cf->data + 0));
- if (cf->can_dlc > 4)
- data[1] = be32_to_cpup((__be32 *)(cf->data + 4));
+ dlc = can_len2dlc(cf->len) << XCAN_DLCR_DLC_SHIFT;
+ if (can_is_canfd_skb(skb)) {
+ if (cf->flags & CANFD_BRS)
+ dlc |= XCAN_DLCR_BRS_MASK;
+ dlc |= XCAN_DLCR_EDL_MASK;
+ }
priv->write_reg(priv, XCAN_FRAME_ID_OFFSET(frame_offset), id);
/* If the CAN frame is RTR frame this write triggers transmission
* (not on CAN FD)
*/
priv->write_reg(priv, XCAN_FRAME_DLC_OFFSET(frame_offset), dlc);
- if (!(cf->can_id & CAN_RTR_FLAG)) {
- priv->write_reg(priv, XCAN_FRAME_DW1_OFFSET(frame_offset),
- data[0]);
- /* If the CAN frame is Standard/Extended frame this
- * write triggers transmission (not on CAN FD)
- */
- priv->write_reg(priv, XCAN_FRAME_DW2_OFFSET(frame_offset),
- data[1]);
+ if (priv->devtype.cantype == XAXI_CANFD ||
+ priv->devtype.cantype == XAXI_CANFD_2_0) {
+ for (i = 0; i < cf->len; i += 4) {
+ ramoff = XCANFD_FRAME_DW_OFFSET(frame_offset, dwindex) +
+ (dwindex * XCANFD_DW_BYTES);
+ priv->write_reg(priv, ramoff,
+ be32_to_cpup((__be32 *)(cf->data + i)));
+ dwindex++;
+ }
+ } else {
+ if (cf->len > 0)
+ data[0] = be32_to_cpup((__be32 *)(cf->data + 0));
+ if (cf->len > 4)
+ data[1] = be32_to_cpup((__be32 *)(cf->data + 4));
+
+ if (!(cf->can_id & CAN_RTR_FLAG)) {
+ priv->write_reg(priv,
+ XCAN_FRAME_DW1_OFFSET(frame_offset),
+ data[0]);
+ /* If the CAN frame is Standard/Extended frame this
+ * write triggers transmission (not on CAN FD)
+ */
+ priv->write_reg(priv,
+ XCAN_FRAME_DW2_OFFSET(frame_offset),
+ data[1]);
+ }
}
}
@@ -728,6 +803,113 @@ static int xcan_rx(struct net_device *ndev, int frame_base)
}
/**
+ * xcanfd_rx - Is called from CAN isr to complete the received
+ * frame processing
+ * @ndev: Pointer to net_device structure
+ * @frame_base: Register offset to the frame to be read
+ *
+ * This function is invoked from the CAN isr(poll) to process the Rx frames. It
+ * does minimal processing and invokes "netif_receive_skb" to complete further
+ * processing.
+ * Return: 1 on success and 0 on failure.
+ */
+static int xcanfd_rx(struct net_device *ndev, int frame_base)
+{
+ struct xcan_priv *priv = netdev_priv(ndev);
+ struct net_device_stats *stats = &ndev->stats;
+ struct canfd_frame *cf;
+ struct sk_buff *skb;
+ u32 id_xcan, dlc, data[2] = {0, 0}, dwindex = 0, i, fsr, readindex;
+
+ fsr = priv->read_reg(priv, XCAN_FSR_OFFSET);
+ if (fsr & XCAN_FSR_FL_MASK) {
+ readindex = fsr & XCAN_FSR_RI_MASK;
+ id_xcan = priv->read_reg(priv,
+ XCAN_FRAME_ID_OFFSET(frame_base));
+ dlc = priv->read_reg(priv, XCAN_FRAME_DLC_OFFSET(frame_base));
+ if (dlc & XCAN_DLCR_EDL_MASK)
+ skb = alloc_canfd_skb(ndev, &cf);
+ else
+ skb = alloc_can_skb(ndev, (struct can_frame **)&cf);
+
+ if (unlikely(!skb)) {
+ stats->rx_dropped++;
+ return 0;
+ }
+
+ /* Change Xilinx CANFD data length format to socketCAN data
+ * format
+ */
+ if (dlc & XCAN_DLCR_EDL_MASK)
+ cf->len = can_dlc2len((dlc & XCAN_DLCR_DLC_MASK) >>
+ XCAN_DLCR_DLC_SHIFT);
+ else
+ cf->len = get_can_dlc((dlc & XCAN_DLCR_DLC_MASK) >>
+ XCAN_DLCR_DLC_SHIFT);
+
+ /* Change Xilinx CAN ID format to socketCAN ID format */
+ if (id_xcan & XCAN_IDR_IDE_MASK) {
+ /* The received frame is an Extended format frame */
+ cf->can_id = (id_xcan & XCAN_IDR_ID1_MASK) >> 3;
+ cf->can_id |= (id_xcan & XCAN_IDR_ID2_MASK) >>
+ XCAN_IDR_ID2_SHIFT;
+ cf->can_id |= CAN_EFF_FLAG;
+ if (id_xcan & XCAN_IDR_RTR_MASK)
+ cf->can_id |= CAN_RTR_FLAG;
+ } else {
+ /* The received frame is a standard format frame */
+ cf->can_id = (id_xcan & XCAN_IDR_ID1_MASK) >>
+ XCAN_IDR_ID1_SHIFT;
+ if (!(dlc & XCAN_DLCR_EDL_MASK) && (id_xcan &
+ XCAN_IDR_SRR_MASK))
+ cf->can_id |= CAN_RTR_FLAG;
+ }
+
+ /* Check the frame received is FD or not*/
+ if (dlc & XCAN_DLCR_EDL_MASK) {
+ for (i = 0; i < cf->len; i += 4) {
+ if (priv->devtype.flags & XCAN_FLAG_CANFD_2)
+ data[0] = priv->read_reg(priv,
+ (XCAN_RXMSG_2_FRAME_OFFSET(readindex) +
+ (dwindex * XCANFD_DW_BYTES)));
+ else
+ data[0] = priv->read_reg(priv,
+ (XCAN_RXMSG_FRAME_OFFSET(readindex) +
+ (dwindex * XCANFD_DW_BYTES)));
+ *(__be32 *)(cf->data + i) =
+ cpu_to_be32(data[0]);
+ dwindex++;
+ }
+ } else {
+ for (i = 0; i < cf->len; i += 4) {
+ if (priv->devtype.flags & XCAN_FLAG_CANFD_2)
+ data[0] = priv->read_reg(priv,
+ XCAN_RXMSG_2_FRAME_OFFSET(readindex) + i);
+ else
+ data[0] = priv->read_reg(priv,
+ XCAN_RXMSG_FRAME_OFFSET(readindex) + i);
+ *(__be32 *)(cf->data + i) =
+ cpu_to_be32(data[0]);
+ }
+ }
+ /* Update FSR Register so that next packet will save to
+ * buffer
+ */
+ fsr = priv->read_reg(priv, XCAN_FSR_OFFSET);
+ fsr |= XCAN_FSR_IRI_MASK;
+ priv->write_reg(priv, XCAN_FSR_OFFSET, fsr);
+ fsr = priv->read_reg(priv, XCAN_FSR_OFFSET);
+ stats->rx_bytes += cf->len;
+ stats->rx_packets++;
+ netif_receive_skb(skb);
+
+ return 1;
+ }
+ /* If FSR Register is not updated with fill level */
+ return 0;
+}
+
+/**
* xcan_current_error_state - Get current error state from HW
* @ndev: Pointer to net_device structure
*
@@ -1037,7 +1219,10 @@ static int xcan_rx_poll(struct napi_struct *napi, int quota)
while ((frame_offset = xcan_rx_fifo_get_next_frame(priv)) >= 0 &&
(work_done < quota)) {
- work_done += xcan_rx(ndev, frame_offset);
+ if (xcan_rx_int_mask(priv) & XCAN_IXR_RXOK_MASK)
+ work_done += xcanfd_rx(ndev, frame_offset);
+ else
+ work_done += xcan_rx(ndev, frame_offset);
if (priv->devtype.flags & XCAN_FLAG_RX_FIFO_MULTI)
/* increment read index */
@@ -1579,6 +1764,19 @@ static int xcan_probe(struct platform_device *pdev)
priv->can.do_get_berr_counter = xcan_get_berr_counter;
priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
CAN_CTRLMODE_BERR_REPORTING;
+
+ if (devtype->cantype == XAXI_CANFD)
+ priv->can.data_bittiming_const =
+ &xcan_data_bittiming_const_canfd;
+
+ if (devtype->cantype == XAXI_CANFD_2_0)
+ priv->can.data_bittiming_const =
+ &xcan_data_bittiming_const_canfd2;
+
+ if (devtype->cantype == XAXI_CANFD ||
+ devtype->cantype == XAXI_CANFD_2_0)
+ priv->can.ctrlmode_supported |= CAN_CTRLMODE_FD;
+
priv->reg_base = addr;
priv->tx_max = tx_max;
priv->devtype = *devtype;
--
2.7.4
To differentiate between different CAN IP's this patch adds
cantype enum variable in the xcan_devtype_data structure
Signed-off-by: Appana Durga Kedareswara rao <[email protected]>
---
drivers/net/can/xilinx_can.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 22569ef..b45ece9 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -157,7 +157,15 @@ enum xcan_reg {
#define XCAN_FLAG_RX_FIFO_MULTI 0x0010
#define XCAN_FLAG_CANFD_2 0x0020
+enum xcan_ip_type {
+ XAXI_CAN = 0,
+ XZYNQ_CANPS,
+ XAXI_CANFD,
+ XAXI_CANFD_2_0,
+};
+
struct xcan_devtype_data {
+ enum xcan_ip_type cantype;
unsigned int flags;
const struct can_bittiming_const *bittiming_const;
const char *bus_clk_name;
@@ -1428,6 +1436,7 @@ static const struct dev_pm_ops xcan_dev_pm_ops = {
};
static const struct xcan_devtype_data xcan_zynq_data = {
+ .cantype = XZYNQ_CANPS,
.flags = XCAN_FLAG_TXFEMP,
.bittiming_const = &xcan_bittiming_const,
.btr_ts2_shift = XCAN_BTR_TS2_SHIFT,
@@ -1436,6 +1445,7 @@ static const struct xcan_devtype_data xcan_zynq_data = {
};
static const struct xcan_devtype_data xcan_axi_data = {
+ .cantype = XAXI_CAN,
.flags = XCAN_FLAG_TXFEMP,
.bittiming_const = &xcan_bittiming_const,
.btr_ts2_shift = XCAN_BTR_TS2_SHIFT,
@@ -1444,6 +1454,7 @@ static const struct xcan_devtype_data xcan_axi_data = {
};
static const struct xcan_devtype_data xcan_canfd_data = {
+ .cantype = XAXI_CANFD,
.flags = XCAN_FLAG_EXT_FILTERS |
XCAN_FLAG_RXMNF |
XCAN_FLAG_TX_MAILBOXES |
@@ -1455,6 +1466,7 @@ static const struct xcan_devtype_data xcan_canfd_data = {
};
static const struct xcan_devtype_data xcan_canfd2_data = {
+ .cantype = XAXI_CANFD_2_0,
.flags = XCAN_FLAG_EXT_FILTERS |
XCAN_FLAG_RXMNF |
XCAN_FLAG_TX_MAILBOXES |
--
2.7.4
This patch fixes below checkpatch warnings and checks in the driver.
CHECK: Alignment should match open parenthesis
+ void (*write_reg)(const struct xcan_priv *priv, enum xcan_reg reg,
+ u32 val);
CHECK: Alignment should match open parenthesis
+static void xcan_write_reg_le(const struct xcan_priv *priv, enum xcan_reg reg,
+ u32 val)
CHECK: Alignment should match open parenthesis
+static void xcan_write_reg_be(const struct xcan_priv *priv, enum xcan_reg reg,
+ u32 val)
CHECK: Alignment should match open parenthesis
+ netdev_dbg(ndev, "BRPR=0x%08x, BTR=0x%08x\n",
+ priv->read_reg(priv, XCAN_BRPR_OFFSET),
CHECK: Alignment should match open parenthesis
+ netdev_warn(ndev,
+ "timed out for correct mode\n");
CHECK: Alignment should match open parenthesis
+ netdev_dbg(ndev, "status:#x%08x\n",
+ priv->read_reg(priv, XCAN_SR_OFFSET));
CHECK: spaces preferred around that '-' (ctx:VxV)
+ (CAN_EFF_ID_BITS-CAN_SFF_ID_BITS)) <<
^
CHECK: Alignment should match open parenthesis
+ netdev_dbg(ndev, "%s: error status register:0x%x\n",
+ __func__, priv->read_reg(priv, XCAN_ESR_OFFSET));
WARNING: line over 80 characters
+ offset = XCAN_RXMSG_2_FRAME_OFFSET(fsr & XCAN_FSR_RI_MASK);
WARNING: line over 80 characters
+ offset = XCAN_RXMSG_FRAME_OFFSET(fsr & XCAN_FSR_RI_MASK);
WARNING: line over 80 characters
+ while ((isr & XCAN_IXR_TXOK_MASK) && !WARN_ON(++retries == 100)) {
WARNING: line over 80 characters
+ priv->write_reg(priv, XCAN_ICR_OFFSET, XCAN_IXR_TXOK_MASK);
CHECK: Alignment should match open parenthesis
+ netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n",
+ __func__, ret);
CHECK: Alignment should match open parenthesis
+ ret = request_irq(ndev->irq, xcan_interrupt, priv->irq_flags,
+ ndev->name, ndev);
CHECK: Alignment should match open parenthesis
+static int xcan_get_berr_counter(const struct net_device *ndev,
+ struct can_berr_counter *bec)
CHECK: Alignment should match open parenthesis
+ netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n",
+ __func__, ret);
CHECK: Please don't use multiple blank lines
+
+
CHECK: Alignment should match open parenthesis
+ netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n",
+ __func__, ret);`
Signed-off-by: Appana Durga Kedareswara rao <[email protected]>
---
drivers/net/can/xilinx_can.c | 41 ++++++++++++++++++++++-------------------
1 file changed, 22 insertions(+), 19 deletions(-)
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 97d0933..2de51ac 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -191,7 +191,7 @@ struct xcan_priv {
struct napi_struct napi;
u32 (*read_reg)(const struct xcan_priv *priv, enum xcan_reg reg);
void (*write_reg)(const struct xcan_priv *priv, enum xcan_reg reg,
- u32 val);
+ u32 val);
struct device *dev;
void __iomem *reg_base;
unsigned long irq_flags;
@@ -246,7 +246,7 @@ static const struct can_bittiming_const xcan_bittiming_const_canfd2 = {
* Write data to the paricular CAN register
*/
static void xcan_write_reg_le(const struct xcan_priv *priv, enum xcan_reg reg,
- u32 val)
+ u32 val)
{
iowrite32(val, priv->reg_base + reg);
}
@@ -273,7 +273,7 @@ static u32 xcan_read_reg_le(const struct xcan_priv *priv, enum xcan_reg reg)
* Write data to the paricular CAN register
*/
static void xcan_write_reg_be(const struct xcan_priv *priv, enum xcan_reg reg,
- u32 val)
+ u32 val)
{
iowrite32be(val, priv->reg_base + reg);
}
@@ -381,8 +381,8 @@ static int xcan_set_bittiming(struct net_device *ndev)
priv->write_reg(priv, XCAN_BTR_OFFSET, btr1);
netdev_dbg(ndev, "BRPR=0x%08x, BTR=0x%08x\n",
- priv->read_reg(priv, XCAN_BRPR_OFFSET),
- priv->read_reg(priv, XCAN_BTR_OFFSET));
+ priv->read_reg(priv, XCAN_BRPR_OFFSET),
+ priv->read_reg(priv, XCAN_BTR_OFFSET));
return 0;
}
@@ -447,12 +447,12 @@ static int xcan_chip_start(struct net_device *ndev)
while (!(priv->read_reg(priv, XCAN_SR_OFFSET) & reg_sr_mask)) {
if (time_after(jiffies, timeout)) {
netdev_warn(ndev,
- "timed out for correct mode\n");
+ "timed out for correct mode\n");
return -ETIMEDOUT;
}
}
netdev_dbg(ndev, "status:#x%08x\n",
- priv->read_reg(priv, XCAN_SR_OFFSET));
+ priv->read_reg(priv, XCAN_SR_OFFSET));
priv->can.state = CAN_STATE_ERROR_ACTIVE;
return 0;
@@ -506,7 +506,7 @@ static void xcan_write_frame(struct xcan_priv *priv, struct sk_buff *skb,
id = ((cf->can_id & CAN_EFF_MASK) << XCAN_IDR_ID2_SHIFT) &
XCAN_IDR_ID2_MASK;
id |= (((cf->can_id & CAN_EFF_MASK) >>
- (CAN_EFF_ID_BITS-CAN_SFF_ID_BITS)) <<
+ (CAN_EFF_ID_BITS - CAN_SFF_ID_BITS)) <<
XCAN_IDR_ID1_SHIFT) & XCAN_IDR_ID1_MASK;
/* The substibute remote TX request bit should be "1"
@@ -942,7 +942,7 @@ static void xcan_err_interrupt(struct net_device *ndev, u32 isr)
}
netdev_dbg(ndev, "%s: error status register:0x%x\n",
- __func__, priv->read_reg(priv, XCAN_ESR_OFFSET));
+ __func__, priv->read_reg(priv, XCAN_ESR_OFFSET));
}
/**
@@ -990,9 +990,11 @@ static int xcan_rx_fifo_get_next_frame(struct xcan_priv *priv)
return -ENOENT;
if (priv->devtype.flags & XCAN_FLAG_CANFD_2)
- offset = XCAN_RXMSG_2_FRAME_OFFSET(fsr & XCAN_FSR_RI_MASK);
+ offset =
+ XCAN_RXMSG_2_FRAME_OFFSET(fsr & XCAN_FSR_RI_MASK);
else
- offset = XCAN_RXMSG_FRAME_OFFSET(fsr & XCAN_FSR_RI_MASK);
+ offset =
+ XCAN_RXMSG_FRAME_OFFSET(fsr & XCAN_FSR_RI_MASK);
} else {
/* check if RX FIFO is empty */
@@ -1102,8 +1104,10 @@ static void xcan_tx_interrupt(struct net_device *ndev, u32 isr)
* via TXFEMP handling as we read TXFEMP *after* TXOK
* clear to satisfy (1).
*/
- while ((isr & XCAN_IXR_TXOK_MASK) && !WARN_ON(++retries == 100)) {
- priv->write_reg(priv, XCAN_ICR_OFFSET, XCAN_IXR_TXOK_MASK);
+ while ((isr & XCAN_IXR_TXOK_MASK) &&
+ !WARN_ON(++retries == 100)) {
+ priv->write_reg(priv, XCAN_ICR_OFFSET,
+ XCAN_IXR_TXOK_MASK);
isr = priv->read_reg(priv, XCAN_ISR_OFFSET);
}
@@ -1216,12 +1220,12 @@ static int xcan_open(struct net_device *ndev)
ret = pm_runtime_get_sync(priv->dev);
if (ret < 0) {
netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n",
- __func__, ret);
+ __func__, ret);
return ret;
}
ret = request_irq(ndev->irq, xcan_interrupt, priv->irq_flags,
- ndev->name, ndev);
+ ndev->name, ndev);
if (ret < 0) {
netdev_err(ndev, "irq allocation for CAN failed\n");
goto err;
@@ -1292,7 +1296,7 @@ static int xcan_close(struct net_device *ndev)
* Return: 0 on success and failure value on error
*/
static int xcan_get_berr_counter(const struct net_device *ndev,
- struct can_berr_counter *bec)
+ struct can_berr_counter *bec)
{
struct xcan_priv *priv = netdev_priv(ndev);
int ret;
@@ -1300,7 +1304,7 @@ static int xcan_get_berr_counter(const struct net_device *ndev,
ret = pm_runtime_get_sync(priv->dev);
if (ret < 0) {
netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n",
- __func__, ret);
+ __func__, ret);
return ret;
}
@@ -1313,7 +1317,6 @@ static int xcan_get_berr_counter(const struct net_device *ndev,
return 0;
}
-
static const struct net_device_ops xcan_netdev_ops = {
.ndo_open = xcan_open,
.ndo_stop = xcan_close,
@@ -1597,7 +1600,7 @@ static int xcan_probe(struct platform_device *pdev)
ret = pm_runtime_get_sync(&pdev->dev);
if (ret < 0) {
netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n",
- __func__, ret);
+ __func__, ret);
goto err_pmdisable;
}
--
2.7.4
Update driver to have SPDX identifiers.
Signed-off-by: Appana Durga Kedareswara rao <[email protected]>
---
drivers/net/can/xilinx_can.c | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 3d75a28..e1544e0 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -1,20 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
/* Xilinx CAN device driver
*
* Copyright (C) 2012 - 2014 Xilinx, Inc.
* Copyright (C) 2009 PetaLogix. All rights reserved.
* Copyright (C) 2017 - 2018 Sandvik Mining and Construction Oy
*
- * Description:
- * This driver is developed for Axi CAN IP and for Zynq CANPS Controller.
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#include <linux/clk.h>
--
2.7.4
AXI CAN IP and CANPS IP supports tx fifo empty feature, this patch updates
the flags field for the same.
Signed-off-by: Appana Durga Kedareswara rao <[email protected]>
---
drivers/net/can/xilinx_can.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 2de51ac..22569ef 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -1428,6 +1428,7 @@ static const struct dev_pm_ops xcan_dev_pm_ops = {
};
static const struct xcan_devtype_data xcan_zynq_data = {
+ .flags = XCAN_FLAG_TXFEMP,
.bittiming_const = &xcan_bittiming_const,
.btr_ts2_shift = XCAN_BTR_TS2_SHIFT,
.btr_sjw_shift = XCAN_BTR_SJW_SHIFT,
@@ -1435,6 +1436,7 @@ static const struct xcan_devtype_data xcan_zynq_data = {
};
static const struct xcan_devtype_data xcan_axi_data = {
+ .flags = XCAN_FLAG_TXFEMP,
.bittiming_const = &xcan_bittiming_const,
.btr_ts2_shift = XCAN_BTR_TS2_SHIFT,
.btr_sjw_shift = XCAN_BTR_SJW_SHIFT,
--
2.7.4
On 3/18/19 12:32 PM, Appana Durga Kedareswara rao wrote:
> This patch series does the below
> --> Added support for CANFD FD frames
> --> Fix Checkpatch reported warnings and checks
>
> Appana Durga Kedareswara rao (6):
> net: can: xilinx_can: Fix style issues
> net: can: xilinx_can: Fix flags field initialization for axi can and
> canps
> net: can: xilinx_can: Add cantype parameter in xcan_devtype_data
> struct
> net: can: xilinx_can: Add support for CANFD FD frames
> net: can: xilinx_can: Add SPDX license
> net: can: xilinx_can: Fix kernel doc warnings
>
> drivers/net/can/xilinx_can.c | 303 ++++++++++++++++++++++++++++++++++++-------
> 1 file changed, 257 insertions(+), 46 deletions(-)
Applied to linux-can-next/testing, but in order. First fixes than
enhancements:
> 241826302854 net: can: xilinx_can: Fix style issues
> 70fb26fadc27 net: can: xilinx_can: Fix kernel doc warnings
> 7beb64351ff1 net: can: xilinx_can: Add SPDX license
> dd94910bceae net: can: xilinx_can: Fix flags field initialization for axi can and canps
> 6bd05cece567 net: can: xilinx_can: Add cantype parameter in xcan_devtype_data struct
> 34e280170736 net: can: xilinx_can: Add support for CANFD FD frames
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
Hi Marc,
> -----Original Message-----
> From: Marc Kleine-Budde <[email protected]>
> Sent: Wednesday, March 20, 2019 6:39 PM
> To: Appana Durga Kedareswara Rao <[email protected]>;
> [email protected]; [email protected]; Michal Simek
> <[email protected]>
> Cc: [email protected]; [email protected]; linux-arm-
> [email protected]; [email protected]
> Subject: Re: [PATCH 0/6] net: can: xilinx_can: Bug fixes and Enhancements
>
> On 3/18/19 12:32 PM, Appana Durga Kedareswara rao wrote:
> > This patch series does the below
> > --> Added support for CANFD FD frames
> > --> Fix Checkpatch reported warnings and checks
> >
> > Appana Durga Kedareswara rao (6):
> > net: can: xilinx_can: Fix style issues
> > net: can: xilinx_can: Fix flags field initialization for axi can and
> > canps
> > net: can: xilinx_can: Add cantype parameter in xcan_devtype_data
> > struct
> > net: can: xilinx_can: Add support for CANFD FD frames
> > net: can: xilinx_can: Add SPDX license
> > net: can: xilinx_can: Fix kernel doc warnings
> >
> > drivers/net/can/xilinx_can.c | 303
> > ++++++++++++++++++++++++++++++++++++-------
> > 1 file changed, 257 insertions(+), 46 deletions(-)
>
> Applied to linux-can-next/testing, but in order. First fixes than
> enhancements:
Thanks...
I couldn't find the patches here https://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git/log/drivers/net/can/xilinx_can.c?h=testing
Am I referring wrong repo/branch??
Regards,
Kedar.
>
> > 241826302854 net: can: xilinx_can: Fix style issues
> > 70fb26fadc27 net: can: xilinx_can: Fix kernel doc warnings
> > 7beb64351ff1 net: can: xilinx_can: Add SPDX license dd94910bceae net:
> > can: xilinx_can: Fix flags field initialization for axi can and canps
> > 6bd05cece567 net: can: xilinx_can: Add cantype parameter in
> > xcan_devtype_data struct
> > 34e280170736 net: can: xilinx_can: Add support for CANFD FD frames
>
> Marc
>
> --
> Pengutronix e.K. | Marc Kleine-Budde |
> Industrial Linux Solutions | Phone: +49-231-2826-924 |
> Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
> Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
Hi Marc,
> -----Original Message-----
> From: Appana Durga Kedareswara Rao
> Sent: Thursday, March 21, 2019 12:06 PM
> To: 'Marc Kleine-Budde' <[email protected]>; [email protected];
> [email protected]; Michal Simek <[email protected]>
> Cc: [email protected]; [email protected]; linux-arm-
> [email protected]; [email protected]
> Subject: RE: [PATCH 0/6] net: can: xilinx_can: Bug fixes and Enhancements
>
> Hi Marc,
>
> > -----Original Message-----
> > From: Marc Kleine-Budde <[email protected]>
> > Sent: Wednesday, March 20, 2019 6:39 PM
> > To: Appana Durga Kedareswara Rao <[email protected]>;
> > [email protected]; [email protected]; Michal Simek
> > <[email protected]>
> > Cc: [email protected]; [email protected]; linux-arm-
> > [email protected]; [email protected]
> > Subject: Re: [PATCH 0/6] net: can: xilinx_can: Bug fixes and
> > Enhancements
> >
> > On 3/18/19 12:32 PM, Appana Durga Kedareswara rao wrote:
> > > This patch series does the below
> > > --> Added support for CANFD FD frames Fix Checkpatch reported
> > > --> warnings and checks
> > >
> > > Appana Durga Kedareswara rao (6):
> > > net: can: xilinx_can: Fix style issues
> > > net: can: xilinx_can: Fix flags field initialization for axi can and
> > > canps
> > > net: can: xilinx_can: Add cantype parameter in xcan_devtype_data
> > > struct
> > > net: can: xilinx_can: Add support for CANFD FD frames
> > > net: can: xilinx_can: Add SPDX license
> > > net: can: xilinx_can: Fix kernel doc warnings
> > >
> > > drivers/net/can/xilinx_can.c | 303
> > > ++++++++++++++++++++++++++++++++++++-------
> > > 1 file changed, 257 insertions(+), 46 deletions(-)
> >
> > Applied to linux-can-next/testing, but in order. First fixes than
> > enhancements:
>
> Thanks...
> I couldn't find the patches here
> https://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-
> next.git/log/drivers/net/can/xilinx_can.c?h=testing
> Am I referring wrong repo/branch??
There are a couple of bug fixes available for this driver on top of this patch series.
Please let me know the branch where this patch series got applied, will send the bug fixes on top of that branch.
Regards,
Kedar.
>
> Regards,
> Kedar.
> >
> > > 241826302854 net: can: xilinx_can: Fix style issues
> > > 70fb26fadc27 net: can: xilinx_can: Fix kernel doc warnings
> > > 7beb64351ff1 net: can: xilinx_can: Add SPDX license dd94910bceae net:
> > > can: xilinx_can: Fix flags field initialization for axi can and
> > > canps
> > > 6bd05cece567 net: can: xilinx_can: Add cantype parameter in
> > > xcan_devtype_data struct
> > > 34e280170736 net: can: xilinx_can: Add support for CANFD FD frames
> >
> > Marc
> >
> > --
> > Pengutronix e.K. | Marc Kleine-Budde |
> > Industrial Linux Solutions | Phone: +49-231-2826-924 |
> > Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
> > Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
Hi Marc,
Friendly ping !!
> -----Original Message-----
> From: Appana Durga Kedareswara Rao
> Sent: Tuesday, April 23, 2019 12:08 PM
> To: 'Marc Kleine-Budde' <[email protected]>; '[email protected]'
> <[email protected]>; '[email protected]' <[email protected]>;
> Michal Simek <[email protected]>
> Cc: '[email protected]' <[email protected]>;
> '[email protected]' <[email protected]>; 'linux-arm-
> [email protected]' <[email protected]>; 'linux-
> [email protected]' <[email protected]>
> Subject: RE: [PATCH 0/6] net: can: xilinx_can: Bug fixes and Enhancements
>
> Hi Marc,
>
> > -----Original Message-----
> > From: Appana Durga Kedareswara Rao
> > Sent: Thursday, March 21, 2019 12:06 PM
> > To: 'Marc Kleine-Budde' <[email protected]>; [email protected];
> > [email protected]; Michal Simek <[email protected]>
> > Cc: [email protected]; [email protected]; linux-arm-
> > [email protected]; [email protected]
> > Subject: RE: [PATCH 0/6] net: can: xilinx_can: Bug fixes and
> > Enhancements
> >
> > Hi Marc,
> >
> > > -----Original Message-----
> > > From: Marc Kleine-Budde <[email protected]>
> > > Sent: Wednesday, March 20, 2019 6:39 PM
> > > To: Appana Durga Kedareswara Rao <[email protected]>;
> > > [email protected]; [email protected]; Michal Simek
> > > <[email protected]>
> > > Cc: [email protected]; [email protected]; linux-arm-
> > > [email protected]; [email protected]
> > > Subject: Re: [PATCH 0/6] net: can: xilinx_can: Bug fixes and
> > > Enhancements
> > >
> > > On 3/18/19 12:32 PM, Appana Durga Kedareswara rao wrote:
> > > > This patch series does the below
> > > > --> Added support for CANFD FD frames Fix Checkpatch reported
> > > > --> warnings and checks
> > > >
> > > > Appana Durga Kedareswara rao (6):
> > > > net: can: xilinx_can: Fix style issues
> > > > net: can: xilinx_can: Fix flags field initialization for axi can and
> > > > canps
> > > > net: can: xilinx_can: Add cantype parameter in xcan_devtype_data
> > > > struct
> > > > net: can: xilinx_can: Add support for CANFD FD frames
> > > > net: can: xilinx_can: Add SPDX license
> > > > net: can: xilinx_can: Fix kernel doc warnings
> > > >
> > > > drivers/net/can/xilinx_can.c | 303
> > > > ++++++++++++++++++++++++++++++++++++-------
> > > > 1 file changed, 257 insertions(+), 46 deletions(-)
> > >
> > > Applied to linux-can-next/testing, but in order. First fixes than
> > > enhancements:
> >
> > Thanks...
> > I couldn't find the patches here
> > https://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-
> > next.git/log/drivers/net/can/xilinx_can.c?h=testing
> > Am I referring wrong repo/branch??
>
> There are a couple of bug fixes available for this driver on top of this patch
> series.
> Please let me know the branch where this patch series got applied, will send
> the bug fixes on top of that branch.
>
Regards,
Kedar.
> Regards,
> Kedar.
> >
> > Regards,
> > Kedar.
> > >
> > > > 241826302854 net: can: xilinx_can: Fix style issues
> > > > 70fb26fadc27 net: can: xilinx_can: Fix kernel doc warnings
> > > > 7beb64351ff1 net: can: xilinx_can: Add SPDX license dd94910bceae net:
> > > > can: xilinx_can: Fix flags field initialization for axi can and
> > > > canps
> > > > 6bd05cece567 net: can: xilinx_can: Add cantype parameter in
> > > > xcan_devtype_data struct
> > > > 34e280170736 net: can: xilinx_can: Add support for CANFD FD frames
> > >
> > > Marc
> > >
> > > --
> > > Pengutronix e.K. | Marc Kleine-Budde |
> > > Industrial Linux Solutions | Phone: +49-231-2826-924 |
> > > Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
> > > Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
On 18.3.2019 13.32, Appana Durga Kedareswara rao wrote:
> AXI CAN IP and CANPS IP supports tx fifo empty feature, this patch updates
> the flags field for the same.
>
> Signed-off-by: Appana Durga Kedareswara rao <[email protected]>
> ---
> drivers/net/can/xilinx_can.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
> index 2de51ac..22569ef 100644
> --- a/drivers/net/can/xilinx_can.c
> +++ b/drivers/net/can/xilinx_can.c
> @@ -1428,6 +1428,7 @@ static const struct dev_pm_ops xcan_dev_pm_ops = {
> };
>
> static const struct xcan_devtype_data xcan_zynq_data = {
> + .flags = XCAN_FLAG_TXFEMP,
> .bittiming_const = &xcan_bittiming_const,
> .btr_ts2_shift = XCAN_BTR_TS2_SHIFT,
> .btr_sjw_shift = XCAN_BTR_SJW_SHIFT,
Thanks for catching this, this line seemed to have been incorrectly
removed by my 9e5f1b273e ("can: xilinx_can: add support for Xilinx CAN
FD core").
But:
> @@ -1435,6 +1436,7 @@ static const struct xcan_devtype_data xcan_zynq_data = {
> };
>
> static const struct xcan_devtype_data xcan_axi_data = {
> + .flags = XCAN_FLAG_TXFEMP,
> .bittiming_const = &xcan_bittiming_const,
> .btr_ts2_shift = XCAN_BTR_TS2_SHIFT,
> .btr_sjw_shift = XCAN_BTR_SJW_SHIFT,
Are you sure this is right?
In the documentation [1] there does not seem to be any TXFEMP interrupt,
it would be interrupt bit 14 but AXI CAN 5.0 seems to only go up to 11.
Or maybe it is undocumented or there is a newer version somewhere?
[1]
https://www.xilinx.com/support/documentation/ip_documentation/can/v5_0/pg096-can.pdf
--
Anssi Hannula / Bitwise Oy
+358 503803997
Hi,
<Snip>
> On 18.3.2019 13.32, Appana Durga Kedareswara rao wrote:
> > AXI CAN IP and CANPS IP supports tx fifo empty feature, this patch
> > updates the flags field for the same.
> >
> > Signed-off-by: Appana Durga Kedareswara rao
> > <[email protected]>
> > ---
> > drivers/net/can/xilinx_can.c | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> > diff --git a/drivers/net/can/xilinx_can.c
> > b/drivers/net/can/xilinx_can.c index 2de51ac..22569ef 100644
> > --- a/drivers/net/can/xilinx_can.c
> > +++ b/drivers/net/can/xilinx_can.c
> > @@ -1428,6 +1428,7 @@ static const struct dev_pm_ops xcan_dev_pm_ops
> =
> > { };
> >
> > static const struct xcan_devtype_data xcan_zynq_data = {
> > + .flags = XCAN_FLAG_TXFEMP,
> > .bittiming_const = &xcan_bittiming_const,
> > .btr_ts2_shift = XCAN_BTR_TS2_SHIFT,
> > .btr_sjw_shift = XCAN_BTR_SJW_SHIFT,
>
> Thanks for catching this, this line seemed to have been incorrectly removed by
> my 9e5f1b273e ("can: xilinx_can: add support for Xilinx CAN FD core").
>
> But:
>
> > @@ -1435,6 +1436,7 @@ static const struct xcan_devtype_data
> > xcan_zynq_data = { };
> >
> > static const struct xcan_devtype_data xcan_axi_data = {
> > + .flags = XCAN_FLAG_TXFEMP,
> > .bittiming_const = &xcan_bittiming_const,
> > .btr_ts2_shift = XCAN_BTR_TS2_SHIFT,
> > .btr_sjw_shift = XCAN_BTR_SJW_SHIFT,
>
>
> Are you sure this is right?
> In the documentation [1] there does not seem to be any TXFEMP interrupt, it
> would be interrupt bit 14 but AXI CAN 5.0 seems to only go up to 11.
>
> Or maybe it is undocumented or there is a newer version somewhere?
Sorry for the delay in the reply.
Agree TXFEMP interrupt feature is not supported by the Soft IP CAN.
Since this patch already got applied will send a separate patch to fix this.
Regards,
Kedar.
>
> [1]
> https://www.xilinx.com/support/documentation/ip_documentation/can/v5_0
> /pg096-can.pdf
>
> --
> Anssi Hannula / Bitwise Oy
> +358 503803997
On 10/9/19 6:01 AM, Appana Durga Kedareswara Rao wrote:
> Hi,
>
> <Snip>
>> On 18.3.2019 13.32, Appana Durga Kedareswara rao wrote:
>>> AXI CAN IP and CANPS IP supports tx fifo empty feature, this patch
>>> updates the flags field for the same.
>>>
>>> Signed-off-by: Appana Durga Kedareswara rao
>>> <[email protected]>
>>> ---
>>> drivers/net/can/xilinx_can.c | 2 ++
>>> 1 file changed, 2 insertions(+)
>>>
>>> diff --git a/drivers/net/can/xilinx_can.c
>>> b/drivers/net/can/xilinx_can.c index 2de51ac..22569ef 100644
>>> --- a/drivers/net/can/xilinx_can.c
>>> +++ b/drivers/net/can/xilinx_can.c
>>> @@ -1428,6 +1428,7 @@ static const struct dev_pm_ops xcan_dev_pm_ops
>> =
>>> { };
>>>
>>> static const struct xcan_devtype_data xcan_zynq_data = {
>>> + .flags = XCAN_FLAG_TXFEMP,
>>> .bittiming_const = &xcan_bittiming_const,
>>> .btr_ts2_shift = XCAN_BTR_TS2_SHIFT,
>>> .btr_sjw_shift = XCAN_BTR_SJW_SHIFT,
>>
>> Thanks for catching this, this line seemed to have been incorrectly removed by
>> my 9e5f1b273e ("can: xilinx_can: add support for Xilinx CAN FD core").
>>
>> But:
>>
>>> @@ -1435,6 +1436,7 @@ static const struct xcan_devtype_data
>>> xcan_zynq_data = { };
>>>
>>> static const struct xcan_devtype_data xcan_axi_data = {
>>> + .flags = XCAN_FLAG_TXFEMP,
>>> .bittiming_const = &xcan_bittiming_const,
>>> .btr_ts2_shift = XCAN_BTR_TS2_SHIFT,
>>> .btr_sjw_shift = XCAN_BTR_SJW_SHIFT,
>>
>>
>> Are you sure this is right?
>> In the documentation [1] there does not seem to be any TXFEMP interrupt, it
>> would be interrupt bit 14 but AXI CAN 5.0 seems to only go up to 11.
>>
>> Or maybe it is undocumented or there is a newer version somewhere?
>
> Sorry for the delay in the reply.
> Agree TXFEMP interrupt feature is not supported by the Soft IP CAN.
> Since this patch already got applied will send a separate patch to fix this.
Please base your patch on net/master and add the appropriate fixes tag:
Fixes: 3281b380ec9f ("can: xilinx_can: Fix flags field initialization for axi can and canps")
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
Hi Marc,
<Snip>
> On 10/9/19 6:01 AM, Appana Durga Kedareswara Rao wrote:
> > Hi,
> >
> > <Snip>
> >> On 18.3.2019 13.32, Appana Durga Kedareswara rao wrote:
> >>> AXI CAN IP and CANPS IP supports tx fifo empty feature, this patch
> >>> updates the flags field for the same.
> >>>
> >>> Signed-off-by: Appana Durga Kedareswara rao
> >>> <[email protected]>
> >>> ---
> >>> drivers/net/can/xilinx_can.c | 2 ++
> >>> 1 file changed, 2 insertions(+)
> >>>
> >>> diff --git a/drivers/net/can/xilinx_can.c
> >>> b/drivers/net/can/xilinx_can.c index 2de51ac..22569ef 100644
> >>> --- a/drivers/net/can/xilinx_can.c
> >>> +++ b/drivers/net/can/xilinx_can.c
> >>> @@ -1428,6 +1428,7 @@ static const struct dev_pm_ops
> xcan_dev_pm_ops
> >> =
> >>> { };
> >>>
> >>> static const struct xcan_devtype_data xcan_zynq_data = {
> >>> + .flags = XCAN_FLAG_TXFEMP,
> >>> .bittiming_const = &xcan_bittiming_const,
> >>> .btr_ts2_shift = XCAN_BTR_TS2_SHIFT,
> >>> .btr_sjw_shift = XCAN_BTR_SJW_SHIFT,
> >>
> >> Thanks for catching this, this line seemed to have been incorrectly
> >> removed by my 9e5f1b273e ("can: xilinx_can: add support for Xilinx CAN FD
> core").
> >>
> >> But:
> >>
> >>> @@ -1435,6 +1436,7 @@ static const struct xcan_devtype_data
> >>> xcan_zynq_data = { };
> >>>
> >>> static const struct xcan_devtype_data xcan_axi_data = {
> >>> + .flags = XCAN_FLAG_TXFEMP,
> >>> .bittiming_const = &xcan_bittiming_const,
> >>> .btr_ts2_shift = XCAN_BTR_TS2_SHIFT,
> >>> .btr_sjw_shift = XCAN_BTR_SJW_SHIFT,
> >>
> >>
> >> Are you sure this is right?
> >> In the documentation [1] there does not seem to be any TXFEMP
> >> interrupt, it would be interrupt bit 14 but AXI CAN 5.0 seems to only go up
> to 11.
> >>
> >> Or maybe it is undocumented or there is a newer version somewhere?
> >
> > Sorry for the delay in the reply.
> > Agree TXFEMP interrupt feature is not supported by the Soft IP CAN.
> > Since this patch already got applied will send a separate patch to fix this.
>
> Please base your patch on net/master and add the appropriate fixes tag:
>
> Fixes: 3281b380ec9f ("can: xilinx_can: Fix flags field initialization for axi can
> and canps")
Sure Marc will send the patch on top of net/master.
Regards,
Kedar.
>
> Marc
>
> --
> Pengutronix e.K. | Marc Kleine-Budde |
> Industrial Linux Solutions | Phone: +49-231-2826-924 |
> Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
> Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |