The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-emcon-avari.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6dl-emcon-avari.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6dl-emcon-avari.dtb: pwm@208c000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6q-emcon-avari.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6q-emcon-avari.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6q-emcon-avari.dtb: pwm@208c000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <[email protected]>
---
arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
index 42b2ba23aefc..a308a3584b62 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
@@ -66,7 +66,7 @@ lvds_backlight: lvds-backlight {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lvds_bl>;
enable-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
- pwms = <&pwm1 0 50000>;
+ pwms = <&pwm1 0 50000 0>;
brightness-levels = <
0 4 8 16 32 64 80 96 112
128 144 160 176 250
@@ -78,7 +78,7 @@ lvds_backlight: lvds-backlight {
pwm_fan: pwm-fan {
compatible = "pwm-fan";
#cooling-cells = <2>;
- pwms = <&pwm4 0 50000>;
+ pwms = <&pwm4 0 50000 0>;
cooling-levels = <0 64 127 191 255>;
status = "disabled";
};
@@ -145,7 +145,7 @@ rgb_backlight: rgb-backlight {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgb_bl>;
enable-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
- pwms = <&pwm3 0 5000000>;
+ pwms = <&pwm3 0 5000000 0>;
brightness-levels = <
250 176 160 144 128 112
96 80 64 48 32 16 8 1
@@ -736,17 +736,14 @@ &pcie {
};
&pwm1 {
- #pwm-cells = <2>;
status = "okay";
};
&pwm3 {
- #pwm-cells = <2>;
status = "okay";
};
&pwm4 {
- #pwm-cells = <2>;
status = "okay";
};
--
2.43.0