This is the start of the stable review cycle for the 3.18.72 release.
There are 42 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Tue Sep 26 20:26:30 UTC 2017.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.72-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 3.18.72-rc1
Avraham Stern <[email protected]>
mac80211: flush hw_roc_start work before cancelling the ROC
Michael Lyle <[email protected]>
bcache: fix bch_hprint crash and improve output
Tang Junhui <[email protected]>
bcache: fix for gc and write-back race
Tony Asleson <[email protected]>
bcache: Correct return value for sysfs attach errors
Tang Junhui <[email protected]>
bcache: correct cache_dirty_target in __update_writeback_rate()
Jan Kara <[email protected]>
bcache: Fix leak of bdev reference
Tang Junhui <[email protected]>
bcache: initialize dirty stripes in flash_dev_run()
Guenter Roeck <[email protected]>
media: uvcvideo: Prevent heap overflow when accessing mapped controls
Daniel Mentz <[email protected]>
media: v4l2-compat-ioctl32: Fix timespec conversion
Aleksandr Bezzubikov <[email protected]>
PCI: shpchp: Enable bridge bus mastering if MSI is enabled
Jose Abreu <[email protected]>
ARC: Re-enable MMU upon Machine Check exception
Baohong Liu <[email protected]>
tracing: Apply trace_clock changes to instance max buffer
Steven Rostedt (VMware) <[email protected]>
ftrace: Fix selftest goto location on error
Dan Carpenter <[email protected]>
scsi: qla2xxx: Fix an integer overflow in sysfs code
Hannes Reinecke <[email protected]>
scsi: sg: fixup infoleak when using SG_GET_REQUEST_TABLE
Hannes Reinecke <[email protected]>
scsi: sg: factor out sg_fill_request_table()
Dan Carpenter <[email protected]>
scsi: sg: off by one in sg_ioctl()
Hannes Reinecke <[email protected]>
scsi: sg: use standard lists for sg_requests
Hannes Reinecke <[email protected]>
scsi: sg: remove 'save_scat_len'
Steffen Maier <[email protected]>
scsi: zfcp: trace high part of "new" 64 bit SCSI LUN
Steffen Maier <[email protected]>
scsi: zfcp: trace HBA FSF response by default on dismiss or timedout late response
Steffen Maier <[email protected]>
scsi: zfcp: fix payload with full FCP_RSP IU in SCSI trace records
Steffen Maier <[email protected]>
scsi: zfcp: fix missing trace records for early returns in TMF eh handlers
Benjamin Block <[email protected]>
scsi: zfcp: add handling for FCP_RESID_OVER to the fcp ingress path
Steffen Maier <[email protected]>
scsi: zfcp: fix queuecommand for scsi_eh commands when DIX enabled
Bart Van Assche <[email protected]>
skd: Submit requests to firmware before triggering the doorbell
Bart Van Assche <[email protected]>
skd: Avoid that module unloading triggers a use-after-free
NeilBrown <[email protected]>
md/bitmap: disable bitmap_resize for file-backed bitmaps.
Bart Van Assche <[email protected]>
block: Relax a check in blk_start_queue()
Michael Ellerman <[email protected]>
powerpc: Fix DAR reporting when alignment handler faults
zhangyi (F) <[email protected]>
ext4: fix incorrect quotaoff if the quota feature is enabled
Stephan Mueller <[email protected]>
crypto: AF_ALG - remove SGL terminator indicator when chaining
Kai-Heng Feng <[email protected]>
Input: i8042 - add Gigabyte P57 to the keyboard reset table
Sabrina Dubroca <[email protected]>
ip6_gre: fix endianness errors in ip6gre_err
Greg Kroah-Hartman <[email protected]>
Revert "usb: musb: fix tx fifo flush handling again"
Jaegeuk Kim <[email protected]>
f2fs: check hot_data for roll-forward recovery
Eric Dumazet <[email protected]>
ipv6: fix typo in fib6_net_exit()
Sabrina Dubroca <[email protected]>
ipv6: fix memory leak with multiple tables during netns destruction
Wei Wang <[email protected]>
tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0
Florian Fainelli <[email protected]>
Revert "net: phy: Correctly process PHY_HALTED in phy_stop_machine()"
Arnd Bergmann <[email protected]>
qlge: avoid memcpy buffer overflow
Stefano Brivio <[email protected]>
ipv6: accept 64k - 1 packet length in ip6_find_1stfragopt()
-------------
Diffstat:
Makefile | 4 +-
arch/arc/kernel/entry.S | 6 +
arch/arc/mm/tlb.c | 3 -
arch/powerpc/kernel/align.c | 119 +++++++++++-------
block/blk-core.c | 2 +-
crypto/algif_skcipher.c | 4 +-
drivers/block/skd_main.c | 21 ++--
drivers/input/serio/i8042-x86ia64io.h | 7 ++
drivers/md/bcache/bcache.h | 1 +
drivers/md/bcache/super.c | 7 +-
drivers/md/bcache/sysfs.c | 4 +-
drivers/md/bcache/util.c | 50 +++++---
drivers/md/bcache/writeback.c | 20 +--
drivers/md/bcache/writeback.h | 21 +++-
drivers/md/bitmap.c | 5 +
drivers/media/usb/uvc/uvc_ctrl.c | 7 ++
drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 3 +-
drivers/net/ethernet/qlogic/qlge/qlge_dbg.c | 2 +-
drivers/net/phy/phy.c | 3 -
drivers/pci/hotplug/shpchp_hpc.c | 2 +
drivers/s390/scsi/zfcp_dbf.c | 23 +++-
drivers/s390/scsi/zfcp_dbf.h | 10 +-
drivers/s390/scsi/zfcp_fc.h | 6 +-
drivers/s390/scsi/zfcp_fsf.c | 3 +-
drivers/s390/scsi/zfcp_scsi.c | 8 +-
drivers/scsi/qla2xxx/qla_attr.c | 8 +-
drivers/scsi/sg.c | 169 ++++++++++++--------------
drivers/usb/musb/musb_host.c | 1 -
fs/ext4/super.c | 6 +-
fs/f2fs/recovery.c | 2 +-
kernel/trace/trace.c | 2 +-
kernel/trace/trace_selftest.c | 2 +-
net/ipv4/tcp.c | 4 +
net/ipv6/ip6_fib.c | 25 +++-
net/ipv6/ip6_gre.c | 4 +-
net/ipv6/output_core.c | 6 +-
net/mac80211/offchannel.c | 2 +
37 files changed, 354 insertions(+), 218 deletions(-)
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefano Brivio <[email protected]>
[ Upstream commit 3de33e1ba0506723ab25734e098cf280ecc34756 ]
A packet length of exactly IPV6_MAXPLEN is allowed, we should
refuse parsing options only if the size is 64KiB or more.
While at it, remove one extra variable and one assignment which
were also introduced by the commit that introduced the size
check. Checking the sum 'offset + len' and only later adding
'len' to 'offset' doesn't provide any advantage over directly
summing to 'offset' and checking it.
Fixes: 6399f1fae4ec ("ipv6: avoid overflow of offset in ip6_find_1stfragopt")
Signed-off-by: Stefano Brivio <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/output_core.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
--- a/net/ipv6/output_core.c
+++ b/net/ipv6/output_core.c
@@ -52,7 +52,6 @@ int ip6_find_1stfragopt(struct sk_buff *
while (offset <= packet_len) {
struct ipv6_opt_hdr *exthdr;
- unsigned int len;
switch (**nexthdr) {
@@ -78,10 +77,9 @@ int ip6_find_1stfragopt(struct sk_buff *
exthdr = (struct ipv6_opt_hdr *)(skb_network_header(skb) +
offset);
- len = ipv6_optlen(exthdr);
- if (len + offset >= IPV6_MAXPLEN)
+ offset += ipv6_optlen(exthdr);
+ if (offset > IPV6_MAXPLEN)
return -EINVAL;
- offset += len;
*nexthdr = &exthdr->nexthdr;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kai-Heng Feng <[email protected]>
commit 697c5d8a36768b36729533fb44622b35d56d6ad0 upstream.
Similar to other Gigabyte laptops, the touchpad on P57 requires a
keyboard reset to detect Elantech touchpad correctly.
BugLink: https://bugs.launchpad.net/bugs/1594214
Signed-off-by: Kai-Heng Feng <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/serio/i8042-x86ia64io.h | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -805,6 +805,13 @@ static const struct dmi_system_id __init
},
},
{
+ /* Gigabyte P57 - Elantech touchpad */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "P57"),
+ },
+ },
+ {
/* Schenker XMG C504 - Elantech touchpad */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "XMG"),
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bart Van Assche <[email protected]>
commit 7277cc67b3916eed47558c64f9c9c0de00a35cda upstream.
Since put_disk() triggers a disk_release() call and since that
last function calls blk_put_queue() if disk->queue != NULL, clear
the disk->queue pointer before calling put_disk(). This avoids
that unloading the skd kernel module triggers the following
use-after-free:
WARNING: CPU: 8 PID: 297 at lib/refcount.c:128 refcount_sub_and_test+0x70/0x80
refcount_t: underflow; use-after-free.
CPU: 8 PID: 297 Comm: kworker/8:1 Not tainted 4.11.10-300.fc26.x86_64 #1
Workqueue: events work_for_cpu_fn
Call Trace:
dump_stack+0x63/0x84
__warn+0xcb/0xf0
warn_slowpath_fmt+0x5a/0x80
refcount_sub_and_test+0x70/0x80
refcount_dec_and_test+0x11/0x20
kobject_put+0x1f/0x50
blk_put_queue+0x15/0x20
disk_release+0xae/0xf0
device_release+0x32/0x90
kobject_release+0x67/0x170
kobject_put+0x2b/0x50
put_disk+0x17/0x20
skd_destruct+0x5c/0x890 [skd]
skd_pci_probe+0x124d/0x13a0 [skd]
local_pci_probe+0x42/0xa0
work_for_cpu_fn+0x14/0x20
process_one_work+0x19e/0x470
worker_thread+0x1dc/0x4a0
kthread+0x125/0x140
ret_from_fork+0x25/0x30
Signed-off-by: Bart Van Assche <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Johannes Thumshirn <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/skd_main.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
--- a/drivers/block/skd_main.c
+++ b/drivers/block/skd_main.c
@@ -4679,15 +4679,16 @@ static void skd_free_disk(struct skd_dev
{
struct gendisk *disk = skdev->disk;
- if (disk != NULL) {
- struct request_queue *q = disk->queue;
+ if (disk && (disk->flags & GENHD_FL_UP))
+ del_gendisk(disk);
- if (disk->flags & GENHD_FL_UP)
- del_gendisk(disk);
- if (q)
- blk_cleanup_queue(q);
- put_disk(disk);
+ if (skdev->queue) {
+ blk_cleanup_queue(skdev->queue);
+ skdev->queue = NULL;
+ disk->queue = NULL;
}
+
+ put_disk(disk);
skdev->disk = NULL;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephan Mueller <[email protected]>
Fixed differently upstream as commit 2d97591ef43d ("crypto: af_alg - consolidation of duplicate code")
The SGL is MAX_SGL_ENTS + 1 in size. The last SG entry is used for the
chaining and is properly updated with the sg_chain invocation. During
the filling-in of the initial SG entries, sg_mark_end is called for each
SG entry. This is appropriate as long as no additional SGL is chained
with the current SGL. However, when a new SGL is chained and the last
SG entry is updated with sg_chain, the last but one entry still contains
the end marker from the sg_mark_end. This end marker must be removed as
otherwise a walk of the chained SGLs will cause a NULL pointer
dereference at the last but one SG entry, because sg_next will return
NULL.
The patch only applies to all kernels up to and including 4.13. The
patch 2d97591ef43d0587be22ad1b0d758d6df4999a0b added to 4.14-rc1
introduced a complete new code base which addresses this bug in
a different way. Yet, that patch is too invasive for stable kernels
and was therefore not marked for stable.
Fixes: 8ff590903d5fc ("crypto: algif_skcipher - User-space interface for skcipher operations")
Signed-off-by: Stephan Mueller <[email protected]>
Acked-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/algif_skcipher.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/crypto/algif_skcipher.c
+++ b/crypto/algif_skcipher.c
@@ -92,8 +92,10 @@ static int skcipher_alloc_sgl(struct soc
sg_init_table(sgl->sg, MAX_SGL_ENTS + 1);
sgl->cur = 0;
- if (sg)
+ if (sg) {
scatterwalk_sg_chain(sg, MAX_SGL_ENTS + 1, sgl->sg);
+ sg_unmark_end(sg + (MAX_SGL_ENTS - 1));
+ }
list_add_tail(&sgl->list, &ctx->tsgl);
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: zhangyi (F) <[email protected]>
commit b0a5a9589decd07db755d6a8d9c0910d96ff7992 upstream.
Current ext4 quota should always "usage enabled" if the
quota feautre is enabled. But in ext4_orphan_cleanup(), it
turn quotas off directly (used for the older journaled
quota), so we cannot turn it on again via "quotaon" unless
umount and remount ext4.
Simple reproduce:
mkfs.ext4 -O project,quota /dev/vdb1
mount -o prjquota /dev/vdb1 /mnt
chattr -p 123 /mnt
chattr +P /mnt
touch /mnt/aa /mnt/bb
exec 100<>/mnt/aa
rm -f /mnt/aa
sync
echo c > /proc/sysrq-trigger
#reboot and mount
mount -o prjquota /dev/vdb1 /mnt
#query status
quotaon -Ppv /dev/vdb1
#output
quotaon: Cannot find mountpoint for device /dev/vdb1
quotaon: No correct mountpoint specified.
This patch add check for journaled quotas to avoid incorrect
quotaoff when ext4 has quota feautre.
Signed-off-by: zhangyi (F) <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/super.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -2205,7 +2205,7 @@ static void ext4_orphan_cleanup(struct s
#ifdef CONFIG_QUOTA
/* Needed for iput() to work correctly and not trash data */
sb->s_flags |= MS_ACTIVE;
- /* Turn on quotas so that they are updated correctly */
+ /* Turn on journaled quotas so that they are updated correctly */
for (i = 0; i < EXT4_MAXQUOTAS; i++) {
if (EXT4_SB(sb)->s_qf_names[i]) {
int ret = ext4_quota_on_mount(sb, i);
@@ -2271,9 +2271,9 @@ static void ext4_orphan_cleanup(struct s
ext4_msg(sb, KERN_INFO, "%d truncate%s cleaned up",
PLURAL(nr_truncates));
#ifdef CONFIG_QUOTA
- /* Turn quotas off */
+ /* Turn off journaled quotas if they were enabled for orphan cleanup */
for (i = 0; i < EXT4_MAXQUOTAS; i++) {
- if (sb_dqopt(sb)->files[i])
+ if (EXT4_SB(sb)->s_qf_names[i] && sb_dqopt(sb)->files[i])
dquot_quota_off(sb, i);
}
#endif
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bart Van Assche <[email protected]>
commit 5fbd545cd3fd311ea1d6e8be4cedddd0ee5684c7 upstream.
Ensure that the members of struct skd_msg_buf have been transferred
to the PCIe adapter before the doorbell is triggered. This patch
avoids that I/O fails sporadically and that the following error
message is reported:
(skd0:STM000196603:[0000:00:09.0]): Completion mismatch comp_id=0x0000 skreq=0x0400 new=0x0000
Signed-off-by: Bart Van Assche <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Johannes Thumshirn <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/skd_main.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/block/skd_main.c
+++ b/drivers/block/skd_main.c
@@ -2214,6 +2214,9 @@ static void skd_send_fitmsg(struct skd_d
*/
qcmd |= FIT_QCMD_MSGSIZE_64;
+ /* Make sure skd_msg_buf is written before the doorbell is triggered. */
+ smp_wmb();
+
SKD_WRITEQ(skdev, qcmd, FIT_Q_COMMAND);
}
@@ -2260,6 +2263,9 @@ static void skd_send_special_fitmsg(stru
qcmd = skspcl->mb_dma_address;
qcmd |= FIT_QCMD_QID_NORMAL + FIT_QCMD_MSGSIZE_128;
+ /* Make sure skd_msg_buf is written before the doorbell is triggered. */
+ smp_wmb();
+
SKD_WRITEQ(skdev, qcmd, FIT_Q_COMMAND);
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
commit e8a27f836f165c26f867ece7f31eb5c811692319 upstream.
bitmap_resize() does not work for file-backed bitmaps.
The buffer_heads are allocated and initialized when
the bitmap is read from the file, but resize doesn't
read from the file, it loads from the internal bitmap.
When it comes time to write the new bitmap, the bh is
non-existent and we crash.
The common case when growing an array involves making the array larger,
and that normally means making the bitmap larger. Doing
that inside the kernel is possible, but would need more code.
It is probably easier to require people who use file-backed
bitmaps to remove them and re-add after a reshape.
So this patch disables the resizing of arrays which have
file-backed bitmaps. This is better than crashing.
Reported-by: Zhilong Liu <[email protected]>
Fixes: d60b479d177a ("md/bitmap: add bitmap_resize function to allow bitmap resizing.")
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Shaohua Li <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/bitmap.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -1802,6 +1802,11 @@ int bitmap_resize(struct bitmap *bitmap,
long pages;
struct bitmap_page *new_bp;
+ if (bitmap->storage.file && !init) {
+ pr_info("md: cannot resize file-based bitmap\n");
+ return -EINVAL;
+ }
+
if (chunksize == 0) {
/* If there is enough space, leave the chunk size unchanged,
* else increase by factor of two until there is enough space.
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Benjamin Block <[email protected]>
commit a099b7b1fc1f0418ab8d79ecf98153e1e134656e upstream.
Up until now zfcp would just ignore the FCP_RESID_OVER flag in the FCP
response IU. When this flag is set, it is possible, in regards to the
FCP standard, that the storage-server processes the command normally, up
to the point where data is missing and simply ignores those.
In this case no CHECK CONDITION would be set, and because we ignored the
FCP_RESID_OVER flag we resulted in at least a data loss or even
-corruption as a follow-up error, depending on how the
applications/layers on top behave. To prevent this, we now set the
host-byte of the corresponding scsi_cmnd to DID_ERROR.
Other storage-behaviors, where the same condition results in a CHECK
CONDITION set in the answer, don't need to be changed as they are
handled in the mid-layer already.
Following is an example trace record decoded with zfcpdbf from the
s390-tools package. We forcefully injected a fc_dl which is one byte too
small:
Timestamp : ...
Area : SCSI
Subarea : 00
Level : 3
Exception : -
CPU ID : ..
Caller : 0x...
Record ID : 1
Tag : rsl_err
Request ID : 0x...
SCSI ID : 0x...
SCSI LUN : 0x...
SCSI result : 0x00070000
^^DID_ERROR
SCSI retries : 0x..
SCSI allowed : 0x..
SCSI scribble : 0x...
SCSI opcode : 2a000000 00000000 08000000 00000000
FCP rsp inf cod: 0x00
FCP rsp IU : 00000000 00000000 00000400 00000001
^^fr_flags==FCP_RESID_OVER
^^fr_status==SAM_STAT_GOOD
^^^^^^^^fr_resid
00000000 00000000
As of now, we don't actively handle to possibility that a response IU
has both flags - FCP_RESID_OVER and FCP_RESID_UNDER - set at once.
Reported-by: Luke M. Hopkins <[email protected]>
Reviewed-by: Steffen Maier <[email protected]>
Fixes: 553448f6c483 ("[SCSI] zfcp: Message cleanup")
Fixes: ea127f975424 ("[PATCH] s390 (7/7): zfcp host adapter.") (tglx/history.git)
Signed-off-by: Benjamin Block <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/scsi/zfcp_fc.h | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/s390/scsi/zfcp_fc.h
+++ b/drivers/s390/scsi/zfcp_fc.h
@@ -4,7 +4,7 @@
* Fibre Channel related definitions and inline functions for the zfcp
* device driver
*
- * Copyright IBM Corp. 2009
+ * Copyright IBM Corp. 2009, 2017
*/
#ifndef ZFCP_FC_H
@@ -291,6 +291,10 @@ void zfcp_fc_eval_fcp_rsp(struct fcp_res
!(rsp_flags & FCP_SNS_LEN_VAL) &&
fcp_rsp->resp.fr_status == SAM_STAT_GOOD)
set_host_byte(scsi, DID_ERROR);
+ } else if (unlikely(rsp_flags & FCP_RESID_OVER)) {
+ /* FCP_DL was not sufficient for SCSI data length */
+ if (fcp_rsp->resp.fr_status == SAM_STAT_GOOD)
+ set_host_byte(scsi, DID_ERROR);
}
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hannes Reinecke <[email protected]>
commit 109bade9c625c89bb5ea753aaa1a0a97e6fbb548 upstream.
'Sg_request' is using a private list implementation; convert it to
standard lists.
Signed-off-by: Hannes Reinecke <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Tested-by: Johannes Thumshirn <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/sg.c | 147 ++++++++++++++++++++++--------------------------------
1 file changed, 61 insertions(+), 86 deletions(-)
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -133,7 +133,7 @@ struct sg_device; /* forward declaratio
struct sg_fd;
typedef struct sg_request { /* SG_MAX_QUEUE requests outstanding per file */
- struct sg_request *nextrp; /* NULL -> tail request (slist) */
+ struct list_head entry; /* list entry */
struct sg_fd *parentfp; /* NULL -> not in use */
Sg_scatter_hold data; /* hold buffer, perhaps scatter list */
sg_io_hdr_t header; /* scsi command+info, see <scsi/sg.h> */
@@ -157,7 +157,7 @@ typedef struct sg_fd { /* holds the sta
int timeout; /* defaults to SG_DEFAULT_TIMEOUT */
int timeout_user; /* defaults to SG_DEFAULT_TIMEOUT_USER */
Sg_scatter_hold reserve; /* buffer held for this file descriptor */
- Sg_request *headrp; /* head of request slist, NULL->empty */
+ struct list_head rq_list; /* head of request list */
struct fasync_struct *async_qp; /* used by asynchronous notification */
Sg_request req_arr[SG_MAX_QUEUE]; /* used as singly-linked list */
char low_dma; /* as in parent but possibly overridden to 1 */
@@ -965,7 +965,7 @@ sg_ioctl(struct file *filp, unsigned int
if (!access_ok(VERIFY_WRITE, ip, sizeof (int)))
return -EFAULT;
read_lock_irqsave(&sfp->rq_list_lock, iflags);
- for (srp = sfp->headrp; srp; srp = srp->nextrp) {
+ list_for_each_entry(srp, &sfp->rq_list, entry) {
if ((1 == srp->done) && (!srp->sg_io_owned)) {
read_unlock_irqrestore(&sfp->rq_list_lock,
iflags);
@@ -978,7 +978,8 @@ sg_ioctl(struct file *filp, unsigned int
return 0;
case SG_GET_NUM_WAITING:
read_lock_irqsave(&sfp->rq_list_lock, iflags);
- for (val = 0, srp = sfp->headrp; srp; srp = srp->nextrp) {
+ val = 0;
+ list_for_each_entry(srp, &sfp->rq_list, entry) {
if ((1 == srp->done) && (!srp->sg_io_owned))
++val;
}
@@ -1053,35 +1054,33 @@ sg_ioctl(struct file *filp, unsigned int
if (!rinfo)
return -ENOMEM;
read_lock_irqsave(&sfp->rq_list_lock, iflags);
- for (srp = sfp->headrp, val = 0; val < SG_MAX_QUEUE;
- ++val, srp = srp ? srp->nextrp : srp) {
+ val = 0;
+ list_for_each_entry(srp, &sfp->rq_list, entry) {
+ if (val > SG_MAX_QUEUE)
+ break;
memset(&rinfo[val], 0, SZ_SG_REQ_INFO);
- if (srp) {
- rinfo[val].req_state = srp->done + 1;
- rinfo[val].problem =
- srp->header.masked_status &
- srp->header.host_status &
- srp->header.driver_status;
- if (srp->done)
- rinfo[val].duration =
- srp->header.duration;
- else {
- ms = jiffies_to_msecs(jiffies);
- rinfo[val].duration =
- (ms > srp->header.duration) ?
- (ms - srp->header.duration) : 0;
- }
- rinfo[val].orphan = srp->orphan;
- rinfo[val].sg_io_owned =
- srp->sg_io_owned;
- rinfo[val].pack_id =
- srp->header.pack_id;
- rinfo[val].usr_ptr =
- srp->header.usr_ptr;
+ rinfo[val].req_state = srp->done + 1;
+ rinfo[val].problem =
+ srp->header.masked_status &
+ srp->header.host_status &
+ srp->header.driver_status;
+ if (srp->done)
+ rinfo[val].duration =
+ srp->header.duration;
+ else {
+ ms = jiffies_to_msecs(jiffies);
+ rinfo[val].duration =
+ (ms > srp->header.duration) ?
+ (ms - srp->header.duration) : 0;
}
+ rinfo[val].orphan = srp->orphan;
+ rinfo[val].sg_io_owned = srp->sg_io_owned;
+ rinfo[val].pack_id = srp->header.pack_id;
+ rinfo[val].usr_ptr = srp->header.usr_ptr;
+ val++;
}
read_unlock_irqrestore(&sfp->rq_list_lock, iflags);
- result = __copy_to_user(p, rinfo,
+ result = __copy_to_user(p, rinfo,
SZ_SG_REQ_INFO * SG_MAX_QUEUE);
result = result ? -EFAULT : 0;
kfree(rinfo);
@@ -1213,7 +1212,7 @@ sg_poll(struct file *filp, poll_table *
return POLLERR;
poll_wait(filp, &sfp->read_wait, wait);
read_lock_irqsave(&sfp->rq_list_lock, iflags);
- for (srp = sfp->headrp; srp; srp = srp->nextrp) {
+ list_for_each_entry(srp, &sfp->rq_list, entry) {
/* if any read waiting, flag it */
if ((0 == res) && (1 == srp->done) && (!srp->sg_io_owned))
res = POLLIN | POLLRDNORM;
@@ -2116,7 +2115,7 @@ sg_get_rq_mark(Sg_fd * sfp, int pack_id)
unsigned long iflags;
write_lock_irqsave(&sfp->rq_list_lock, iflags);
- for (resp = sfp->headrp; resp; resp = resp->nextrp) {
+ list_for_each_entry(resp, &sfp->rq_list, entry) {
/* look for requests that are ready + not SG_IO owned */
if ((1 == resp->done) && (!resp->sg_io_owned) &&
((-1 == pack_id) || (resp->header.pack_id == pack_id))) {
@@ -2134,70 +2133,45 @@ sg_add_request(Sg_fd * sfp)
{
int k;
unsigned long iflags;
- Sg_request *resp;
Sg_request *rp = sfp->req_arr;
write_lock_irqsave(&sfp->rq_list_lock, iflags);
- resp = sfp->headrp;
- if (!resp) {
- memset(rp, 0, sizeof (Sg_request));
- rp->parentfp = sfp;
- resp = rp;
- sfp->headrp = resp;
- } else {
- if (0 == sfp->cmd_q)
- resp = NULL; /* command queuing disallowed */
- else {
- for (k = 0; k < SG_MAX_QUEUE; ++k, ++rp) {
- if (!rp->parentfp)
- break;
- }
- if (k < SG_MAX_QUEUE) {
- memset(rp, 0, sizeof (Sg_request));
- rp->parentfp = sfp;
- while (resp->nextrp)
- resp = resp->nextrp;
- resp->nextrp = rp;
- resp = rp;
- } else
- resp = NULL;
+ if (!list_empty(&sfp->rq_list)) {
+ if (!sfp->cmd_q)
+ goto out_unlock;
+
+ for (k = 0; k < SG_MAX_QUEUE; ++k, ++rp) {
+ if (!rp->parentfp)
+ break;
}
+ if (k >= SG_MAX_QUEUE)
+ goto out_unlock;
}
- if (resp) {
- resp->nextrp = NULL;
- resp->header.duration = jiffies_to_msecs(jiffies);
- }
+ memset(rp, 0, sizeof (Sg_request));
+ rp->parentfp = sfp;
+ rp->header.duration = jiffies_to_msecs(jiffies);
+ list_add_tail(&rp->entry, &sfp->rq_list);
write_unlock_irqrestore(&sfp->rq_list_lock, iflags);
- return resp;
+ return rp;
+out_unlock:
+ write_unlock_irqrestore(&sfp->rq_list_lock, iflags);
+ return NULL;
}
/* Return of 1 for found; 0 for not found */
static int
sg_remove_request(Sg_fd * sfp, Sg_request * srp)
{
- Sg_request *prev_rp;
- Sg_request *rp;
unsigned long iflags;
int res = 0;
- if ((!sfp) || (!srp) || (!sfp->headrp))
+ if (!sfp || !srp || list_empty(&sfp->rq_list))
return res;
write_lock_irqsave(&sfp->rq_list_lock, iflags);
- prev_rp = sfp->headrp;
- if (srp == prev_rp) {
- sfp->headrp = prev_rp->nextrp;
- prev_rp->parentfp = NULL;
+ if (!list_empty(&srp->entry)) {
+ list_del(&srp->entry);
+ srp->parentfp = NULL;
res = 1;
- } else {
- while ((rp = prev_rp->nextrp)) {
- if (srp == rp) {
- prev_rp->nextrp = rp->nextrp;
- rp->parentfp = NULL;
- res = 1;
- break;
- }
- prev_rp = rp;
- }
}
write_unlock_irqrestore(&sfp->rq_list_lock, iflags);
return res;
@@ -2216,7 +2190,7 @@ sg_add_sfp(Sg_device * sdp)
init_waitqueue_head(&sfp->read_wait);
rwlock_init(&sfp->rq_list_lock);
-
+ INIT_LIST_HEAD(&sfp->rq_list);
kref_init(&sfp->f_ref);
mutex_init(&sfp->f_mutex);
sfp->timeout = SG_DEFAULT_TIMEOUT;
@@ -2257,10 +2231,13 @@ sg_remove_sfp_usercontext(struct work_st
{
struct sg_fd *sfp = container_of(work, struct sg_fd, ew.work);
struct sg_device *sdp = sfp->parentdp;
+ Sg_request *srp;
/* Cleanup any responses which were never read(). */
- while (sfp->headrp)
- sg_finish_rem_req(sfp->headrp);
+ while (!list_empty(&sfp->rq_list)) {
+ srp = list_first_entry(&sfp->rq_list, Sg_request, entry);
+ sg_finish_rem_req(srp);
+ }
if (sfp->reserve.bufflen > 0) {
SCSI_LOG_TIMEOUT(6, sg_printk(KERN_INFO, sdp,
@@ -2663,7 +2640,7 @@ static int sg_proc_seq_show_devstrs(stru
/* must be called while holding sg_index_lock */
static void sg_proc_debug_helper(struct seq_file *s, Sg_device * sdp)
{
- int k, m, new_interface, blen, usg;
+ int k, new_interface, blen, usg;
Sg_request *srp;
Sg_fd *fp;
const sg_io_hdr_t *hp;
@@ -2683,13 +2660,11 @@ static void sg_proc_debug_helper(struct
seq_printf(s, " cmd_q=%d f_packid=%d k_orphan=%d closed=0\n",
(int) fp->cmd_q, (int) fp->force_packid,
(int) fp->keep_orphan);
- for (m = 0, srp = fp->headrp;
- srp != NULL;
- ++m, srp = srp->nextrp) {
+ list_for_each_entry(srp, &fp->rq_list, entry) {
hp = &srp->header;
new_interface = (hp->interface_id == '\0') ? 0 : 1;
if (srp->res_used) {
- if (new_interface &&
+ if (new_interface &&
(SG_FLAG_MMAP_IO & hp->flags))
cp = " mmap>> ";
else
@@ -2720,7 +2695,7 @@ static void sg_proc_debug_helper(struct
seq_printf(s, "ms sgat=%d op=0x%02x\n", usg,
(int) srp->data.cmd_opcode);
}
- if (0 == m)
+ if (list_empty(&fp->rq_list))
seq_puts(s, " No requests active\n");
read_unlock(&fp->rq_list_lock);
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steffen Maier <[email protected]>
commit 1a5d999ebfc7bfe28deb48931bb57faa8e4102b6 upstream.
For problem determination we need to see that we were in scsi_eh
as well as whether and why we were successful or not.
The following commits introduced new early returns without adding
a trace record:
v2.6.35 commit a1dbfddd02d2
("[SCSI] zfcp: Pass return code from fc_block_scsi_eh to scsi eh")
on fc_block_scsi_eh() returning != 0 which is FAST_IO_FAIL,
v2.6.30 commit 63caf367e1c9
("[SCSI] zfcp: Improve reliability of SCSI eh handlers in zfcp")
on not having gotten an FSF request after the maximum number of retry
attempts and thus could not issue a TMF and has to return FAILED.
Signed-off-by: Steffen Maier <[email protected]>
Fixes: a1dbfddd02d2 ("[SCSI] zfcp: Pass return code from fc_block_scsi_eh to scsi eh")
Fixes: 63caf367e1c9 ("[SCSI] zfcp: Improve reliability of SCSI eh handlers in zfcp")
Reviewed-by: Benjamin Block <[email protected]>
Signed-off-by: Benjamin Block <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/scsi/zfcp_scsi.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -245,8 +245,10 @@ static int zfcp_task_mgmt_function(struc
zfcp_erp_wait(adapter);
ret = fc_block_scsi_eh(scpnt);
- if (ret)
+ if (ret) {
+ zfcp_dbf_scsi_devreset("fiof", scpnt, tm_flags, NULL);
return ret;
+ }
if (!(atomic_read(&adapter->status) &
ZFCP_STATUS_COMMON_RUNNING)) {
@@ -254,8 +256,10 @@ static int zfcp_task_mgmt_function(struc
return SUCCESS;
}
}
- if (!fsf_req)
+ if (!fsf_req) {
+ zfcp_dbf_scsi_devreset("reqf", scpnt, tm_flags, NULL);
return FAILED;
+ }
wait_for_completion(&fsf_req->completion);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hannes Reinecke <[email protected]>
commit 4759df905a474d245752c9dc94288e779b8734dd upstream.
Factor out sg_fill_request_table() for better readability.
[mkp: typos, applied by hand]
Signed-off-by: Hannes Reinecke <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/sg.c | 61 ++++++++++++++++++++++++++++++------------------------
1 file changed, 35 insertions(+), 26 deletions(-)
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -854,6 +854,40 @@ static int max_sectors_bytes(struct requ
return max_sectors << 9;
}
+static void
+sg_fill_request_table(Sg_fd *sfp, sg_req_info_t *rinfo)
+{
+ Sg_request *srp;
+ int val;
+ unsigned int ms;
+
+ val = 0;
+ list_for_each_entry(srp, &sfp->rq_list, entry) {
+ if (val > SG_MAX_QUEUE)
+ break;
+ memset(&rinfo[val], 0, SZ_SG_REQ_INFO);
+ rinfo[val].req_state = srp->done + 1;
+ rinfo[val].problem =
+ srp->header.masked_status &
+ srp->header.host_status &
+ srp->header.driver_status;
+ if (srp->done)
+ rinfo[val].duration =
+ srp->header.duration;
+ else {
+ ms = jiffies_to_msecs(jiffies);
+ rinfo[val].duration =
+ (ms > srp->header.duration) ?
+ (ms - srp->header.duration) : 0;
+ }
+ rinfo[val].orphan = srp->orphan;
+ rinfo[val].sg_io_owned = srp->sg_io_owned;
+ rinfo[val].pack_id = srp->header.pack_id;
+ rinfo[val].usr_ptr = srp->header.usr_ptr;
+ val++;
+ }
+}
+
static long
sg_ioctl(struct file *filp, unsigned int cmd_in, unsigned long arg)
{
@@ -1047,38 +1081,13 @@ sg_ioctl(struct file *filp, unsigned int
return -EFAULT;
else {
sg_req_info_t *rinfo;
- unsigned int ms;
rinfo = kmalloc(SZ_SG_REQ_INFO * SG_MAX_QUEUE,
GFP_KERNEL);
if (!rinfo)
return -ENOMEM;
read_lock_irqsave(&sfp->rq_list_lock, iflags);
- val = 0;
- list_for_each_entry(srp, &sfp->rq_list, entry) {
- if (val >= SG_MAX_QUEUE)
- break;
- memset(&rinfo[val], 0, SZ_SG_REQ_INFO);
- rinfo[val].req_state = srp->done + 1;
- rinfo[val].problem =
- srp->header.masked_status &
- srp->header.host_status &
- srp->header.driver_status;
- if (srp->done)
- rinfo[val].duration =
- srp->header.duration;
- else {
- ms = jiffies_to_msecs(jiffies);
- rinfo[val].duration =
- (ms > srp->header.duration) ?
- (ms - srp->header.duration) : 0;
- }
- rinfo[val].orphan = srp->orphan;
- rinfo[val].sg_io_owned = srp->sg_io_owned;
- rinfo[val].pack_id = srp->header.pack_id;
- rinfo[val].usr_ptr = srp->header.usr_ptr;
- val++;
- }
+ sg_fill_request_table(sfp, rinfo);
read_unlock_irqrestore(&sfp->rq_list_lock, iflags);
result = __copy_to_user(p, rinfo,
SZ_SG_REQ_INFO * SG_MAX_QUEUE);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steffen Maier <[email protected]>
commit 12c3e5754c8022a4f2fd1e9f00d19e99ee0d3cc1 upstream.
If the FCP_RSP UI has optional parts (FCP_SNS_INFO or FCP_RSP_INFO) and
thus does not fit into the fsp_rsp field built into a SCSI trace record,
trace the full FCP_RSP UI with all optional parts as payload record
instead of just FCP_SNS_INFO as payload and
a 1 byte RSP_INFO_CODE part of FCP_RSP_INFO built into the SCSI record.
That way we would also get the full FCP_SNS_INFO in case a
target would ever send more than
min(SCSI_SENSE_BUFFERSIZE==96, ZFCP_DBF_PAY_MAX_REC==256)==96.
The mandatory part of FCP_RSP IU is only 24 bytes.
PAYload costs at least one full PAY record of 256 bytes anyway.
We cap to the hardware response size which is only FSF_FCP_RSP_SIZE==128.
So we can just put the whole FCP_RSP IU with any optional parts into
PAYload similarly as we do for SAN PAY since v4.9 commit aceeffbb59bb
("zfcp: trace full payload of all SAN records (req,resp,iels)").
This does not cause any additional trace records wasting memory.
Decoded trace records were confusing because they showed a hard-coded
sense data length of 96 even if the FCP_RSP_IU field FCP_SNS_LEN showed
actually less.
Since the same commit, we set pl_len for SAN traces to the full length of a
request/response even if we cap the corresponding trace.
In contrast, here for SCSI traces we set pl_len to the pre-computed
length of FCP_RSP IU considering SNS_LEN or RSP_LEN if valid.
Nonetheless we trace a hardcoded payload of length FSF_FCP_RSP_SIZE==128
if there were optional parts.
This makes it easier for the zfcpdbf tool to format only the relevant
part of the long FCP_RSP UI buffer. And any trailing information is still
available in the payload trace record just in case.
Rename the payload record tag from "fcp_sns" to "fcp_riu" to make the new
content explicit to zfcpdbf which can then pick a suitable field name such
as "FCP rsp IU all:" instead of "Sense info :"
Also, the same zfcpdbf can still be backwards compatible with "fcp_sns".
Old example trace record before this fix, formatted with the tool zfcpdbf
from s390-tools:
Timestamp : ...
Area : SCSI
Subarea : 00
Level : 3
Exception : -
CPU id : ..
Caller : 0x...
Record id : 1
Tag : rsl_err
Request id : 0x<request_id>
SCSI ID : 0x...
SCSI LUN : 0x...
SCSI result : 0x00000002
SCSI retries : 0x00
SCSI allowed : 0x05
SCSI scribble : 0x<request_id>
SCSI opcode : 00000000 00000000 00000000 00000000
FCP rsp inf cod: 0x00
FCP rsp IU : 00000000 00000000 00000202 00000000
^^==FCP_SNS_LEN_VALID
00000020 00000000
^^^^^^^^==FCP_SNS_LEN==32
Sense len : 96 <==min(SCSI_SENSE_BUFFERSIZE,ZFCP_DBF_PAY_MAX_REC)
Sense info : 70000600 00000018 00000000 29000000
00000400 00000000 00000000 00000000
00000000 00000000 00000000 00000000<==superfluous
00000000 00000000 00000000 00000000<==superfluous
00000000 00000000 00000000 00000000<==superfluous
00000000 00000000 00000000 00000000<==superfluous
New example trace records with this fix:
Timestamp : ...
Area : SCSI
Subarea : 00
Level : 3
Exception : -
CPU ID : ..
Caller : 0x...
Record ID : 1
Tag : rsl_err
Request ID : 0x<request_id>
SCSI ID : 0x...
SCSI LUN : 0x...
SCSI result : 0x00000002
SCSI retries : 0x00
SCSI allowed : 0x03
SCSI scribble : 0x<request_id>
SCSI opcode : a30c0112 00000000 02000000 00000000
FCP rsp inf cod: 0x00
FCP rsp IU : 00000000 00000000 00000a02 00000200
00000020 00000000
FCP rsp IU len : 56
FCP rsp IU all : 00000000 00000000 00000a02 00000200
^^=FCP_RESID_UNDER|FCP_SNS_LEN_VALID
00000020 00000000 70000500 00000018
^^^^^^^^==FCP_SNS_LEN
^^^^^^^^^^^^^^^^^
00000000 240000cb 00011100 00000000
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
00000000 00000000
^^^^^^^^^^^^^^^^^==FCP_SNS_INFO
Timestamp : ...
Area : SCSI
Subarea : 00
Level : 1
Exception : -
CPU ID : ..
Caller : 0x...
Record ID : 1
Tag : lr_okay
Request ID : 0x<request_id>
SCSI ID : 0x...
SCSI LUN : 0x...
SCSI result : 0x00000000
SCSI retries : 0x00
SCSI allowed : 0x05
SCSI scribble : 0x<request_id>
SCSI opcode : <CDB of unrelated SCSI command passed to eh handler>
FCP rsp inf cod: 0x00
FCP rsp IU : 00000000 00000000 00000100 00000000
00000000 00000008
FCP rsp IU len : 32
FCP rsp IU all : 00000000 00000000 00000100 00000000
^^==FCP_RSP_LEN_VALID
00000000 00000008 00000000 00000000
^^^^^^^^==FCP_RSP_LEN
^^^^^^^^^^^^^^^^^==FCP_RSP_INFO
Signed-off-by: Steffen Maier <[email protected]>
Fixes: 250a1352b95e ("[SCSI] zfcp: Redesign of the debug tracing for SCSI records.")
Reviewed-by: Benjamin Block <[email protected]>
Signed-off-by: Benjamin Block <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/scsi/zfcp_dbf.c | 21 +++++++++++++++++----
1 file changed, 17 insertions(+), 4 deletions(-)
--- a/drivers/s390/scsi/zfcp_dbf.c
+++ b/drivers/s390/scsi/zfcp_dbf.c
@@ -427,19 +427,32 @@ void zfcp_dbf_scsi(char *tag, struct scs
if (fsf) {
rec->fsf_req_id = fsf->req_id;
+ rec->pl_len = FCP_RESP_WITH_EXT;
fcp_rsp = (struct fcp_resp_with_ext *)
&(fsf->qtcb->bottom.io.fcp_rsp);
+ /* mandatory parts of FCP_RSP IU in this SCSI record */
memcpy(&rec->fcp_rsp, fcp_rsp, FCP_RESP_WITH_EXT);
if (fcp_rsp->resp.fr_flags & FCP_RSP_LEN_VAL) {
fcp_rsp_info = (struct fcp_resp_rsp_info *) &fcp_rsp[1];
rec->fcp_rsp_info = fcp_rsp_info->rsp_code;
+ rec->pl_len += be32_to_cpu(fcp_rsp->ext.fr_rsp_len);
}
if (fcp_rsp->resp.fr_flags & FCP_SNS_LEN_VAL) {
- rec->pl_len = min((u16)SCSI_SENSE_BUFFERSIZE,
- (u16)ZFCP_DBF_PAY_MAX_REC);
- zfcp_dbf_pl_write(dbf, sc->sense_buffer, rec->pl_len,
- "fcp_sns", fsf->req_id);
+ rec->pl_len += be32_to_cpu(fcp_rsp->ext.fr_sns_len);
}
+ /* complete FCP_RSP IU in associated PAYload record
+ * but only if there are optional parts
+ */
+ if (fcp_rsp->resp.fr_flags != 0)
+ zfcp_dbf_pl_write(
+ dbf, fcp_rsp,
+ /* at least one full PAY record
+ * but not beyond hardware response field
+ */
+ min_t(u16, max_t(u16, rec->pl_len,
+ ZFCP_DBF_PAY_MAX_REC),
+ FSF_FCP_RSP_SIZE),
+ "fcp_riu", fsf->req_id);
}
debug_event(dbf->scsi, 1, rec, sizeof(*rec));
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Fainelli <[email protected]>
[ Upstream commit ebc8254aeae34226d0bc8fda309fd9790d4dccfe ]
This reverts commit 7ad813f208533cebfcc32d3d7474dc1677d1b09a ("net: phy:
Correctly process PHY_HALTED in phy_stop_machine()") because it is
creating the possibility for a NULL pointer dereference.
David Daney provide the following call trace and diagram of events:
When ndo_stop() is called we call:
phy_disconnect()
+---> phy_stop_interrupts() implies: phydev->irq = PHY_POLL;
+---> phy_stop_machine()
| +---> phy_state_machine()
| +----> queue_delayed_work(): Work queued.
+--->phy_detach() implies: phydev->attached_dev = NULL;
Now at a later time the queued work does:
phy_state_machine()
+---->netif_carrier_off(phydev->attached_dev): Oh no! It is NULL:
CPU 12 Unable to handle kernel paging request at virtual address
0000000000000048, epc == ffffffff80de37ec, ra == ffffffff80c7c
Oops[#1]:
CPU: 12 PID: 1502 Comm: kworker/12:1 Not tainted 4.9.43-Cavium-Octeon+ #1
Workqueue: events_power_efficient phy_state_machine
task: 80000004021ed100 task.stack: 8000000409d70000
$ 0 : 0000000000000000 ffffffff84720060 0000000000000048 0000000000000004
$ 4 : 0000000000000000 0000000000000001 0000000000000004 0000000000000000
$ 8 : 0000000000000000 0000000000000000 00000000ffff98f3 0000000000000000
$12 : 8000000409d73fe0 0000000000009c00 ffffffff846547c8 000000000000af3b
$16 : 80000004096bab68 80000004096babd0 0000000000000000 80000004096ba800
$20 : 0000000000000000 0000000000000000 ffffffff81090000 0000000000000008
$24 : 0000000000000061 ffffffff808637b0
$28 : 8000000409d70000 8000000409d73cf0 80000000271bd300 ffffffff80c7804c
Hi : 000000000000002a
Lo : 000000000000003f
epc : ffffffff80de37ec netif_carrier_off+0xc/0x58
ra : ffffffff80c7804c phy_state_machine+0x48c/0x4f8
Status: 14009ce3 KX SX UX KERNEL EXL IE
Cause : 00800008 (ExcCode 02)
BadVA : 0000000000000048
PrId : 000d9501 (Cavium Octeon III)
Modules linked in:
Process kworker/12:1 (pid: 1502, threadinfo=8000000409d70000,
task=80000004021ed100, tls=0000000000000000)
Stack : 8000000409a54000 80000004096bab68 80000000271bd300 80000000271c1e00
0000000000000000 ffffffff808a1708 8000000409a54000 80000000271bd300
80000000271bd320 8000000409a54030 ffffffff80ff0f00 0000000000000001
ffffffff81090000 ffffffff808a1ac0 8000000402182080 ffffffff84650000
8000000402182080 ffffffff84650000 ffffffff80ff0000 8000000409a54000
ffffffff808a1970 0000000000000000 80000004099e8000 8000000402099240
0000000000000000 ffffffff808a8598 0000000000000000 8000000408eeeb00
8000000409a54000 00000000810a1d00 0000000000000000 8000000409d73de8
8000000409d73de8 0000000000000088 000000000c009c00 8000000409d73e08
8000000409d73e08 8000000402182080 ffffffff808a84d0 8000000402182080
...
Call Trace:
[<ffffffff80de37ec>] netif_carrier_off+0xc/0x58
[<ffffffff80c7804c>] phy_state_machine+0x48c/0x4f8
[<ffffffff808a1708>] process_one_work+0x158/0x368
[<ffffffff808a1ac0>] worker_thread+0x150/0x4c0
[<ffffffff808a8598>] kthread+0xc8/0xe0
[<ffffffff808617f0>] ret_from_kernel_thread+0x14/0x1c
The original motivation for this change originated from Marc Gonzales
indicating that his network driver did not have its adjust_link callback
executing with phydev->link = 0 while he was expecting it.
PHYLIB has never made any such guarantees ever because phy_stop() merely just
tells the workqueue to move into PHY_HALTED state which will happen
asynchronously.
Reported-by: Geert Uytterhoeven <[email protected]>
Reported-by: David Daney <[email protected]>
Fixes: 7ad813f20853 ("net: phy: Correctly process PHY_HALTED in phy_stop_machine()")
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/phy/phy.c | 3 ---
1 file changed, 3 deletions(-)
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -509,9 +509,6 @@ void phy_stop_machine(struct phy_device
if (phydev->state > PHY_UP && phydev->state != PHY_HALTED)
phydev->state = PHY_UP;
mutex_unlock(&phydev->lock);
-
- /* Now we can run the state machine synchronously */
- phy_state_machine(&phydev->state_queue.work);
}
/**
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter <[email protected]>
commit e6f77540c067b48dee10f1e33678415bfcc89017 upstream.
The value of "size" comes from the user. When we add "start + size" it
could lead to an integer overflow bug.
It means we vmalloc() a lot more memory than we had intended. I believe
that on 64 bit systems vmalloc() can succeed even if we ask it to
allocate huge 4GB buffers. So we would get memory corruption and likely
a crash when we call ha->isp_ops->write_optrom() and ->read_optrom().
Only root can trigger this bug.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=194061
Fixes: b7cc176c9eb3 ("[SCSI] qla2xxx: Allow region-based flash-part accesses.")
Reported-by: shqking <[email protected]>
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_attr.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -404,6 +404,8 @@ qla2x00_sysfs_write_optrom_ctl(struct fi
return -EINVAL;
if (start > ha->optrom_size)
return -EINVAL;
+ if (size > ha->optrom_size - start)
+ size = ha->optrom_size - start;
mutex_lock(&ha->optrom_mutex);
switch (val) {
@@ -429,8 +431,7 @@ qla2x00_sysfs_write_optrom_ctl(struct fi
}
ha->optrom_region_start = start;
- ha->optrom_region_size = start + size > ha->optrom_size ?
- ha->optrom_size - start : size;
+ ha->optrom_region_size = start + size;
ha->optrom_state = QLA_SREADING;
ha->optrom_buffer = vmalloc(ha->optrom_region_size);
@@ -503,8 +504,7 @@ qla2x00_sysfs_write_optrom_ctl(struct fi
}
ha->optrom_region_start = start;
- ha->optrom_region_size = start + size > ha->optrom_size ?
- ha->optrom_size - start : size;
+ ha->optrom_region_size = start + size;
ha->optrom_state = QLA_SWRITING;
ha->optrom_buffer = vmalloc(ha->optrom_region_size);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sabrina Dubroca <[email protected]>
[ Upstream commit ba1cc08d9488c94cb8d94f545305688b72a2a300 ]
fib6_net_exit only frees the main and local tables. If another table was
created with fib6_alloc_table, we leak it when the netns is destroyed.
Fix this in the same way ip_fib_net_exit cleans up tables, by walking
through the whole hashtable of fib6_table's. We can get rid of the
special cases for local and main, since they're also part of the
hashtable.
Reproducer:
ip netns add x
ip -net x -6 rule add from 6003:1::/64 table 100
ip netns del x
Reported-by: Jianlin Shi <[email protected]>
Fixes: 58f09b78b730 ("[NETNS][IPV6] ip6_fib - make it per network namespace")
Signed-off-by: Sabrina Dubroca <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ip6_fib.c | 25 +++++++++++++++++++------
1 file changed, 19 insertions(+), 6 deletions(-)
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -160,6 +160,12 @@ static void rt6_release(struct rt6_info
dst_free(&rt->dst);
}
+static void fib6_free_table(struct fib6_table *table)
+{
+ inetpeer_invalidate_tree(&table->tb6_peers);
+ kfree(table);
+}
+
static void fib6_link_table(struct net *net, struct fib6_table *tb)
{
unsigned int h;
@@ -1782,15 +1788,22 @@ out_timer:
static void fib6_net_exit(struct net *net)
{
+ unsigned int i;
+
rt6_ifdown(net, NULL);
del_timer_sync(&net->ipv6.ip6_fib_timer);
-#ifdef CONFIG_IPV6_MULTIPLE_TABLES
- inetpeer_invalidate_tree(&net->ipv6.fib6_local_tbl->tb6_peers);
- kfree(net->ipv6.fib6_local_tbl);
-#endif
- inetpeer_invalidate_tree(&net->ipv6.fib6_main_tbl->tb6_peers);
- kfree(net->ipv6.fib6_main_tbl);
+ for (i = 0; i < FIB_TABLE_HASHSZ; i++) {
+ struct hlist_head *head = &net->ipv6.fib_table_hash[i];
+ struct hlist_node *tmp;
+ struct fib6_table *tb;
+
+ hlist_for_each_entry_safe(tb, tmp, head, tb6_hlist) {
+ hlist_del(&tb->tb6_hlist);
+ fib6_free_table(tb);
+ }
+ }
+
kfree(net->ipv6.fib_table_hash);
kfree(net->ipv6.rt6_stats);
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
This reverts commit 98b91bfa5e478b9bf332f9f149b1c25ffd58f877 which is
commit 45d73860530a14c608f410b91c6c341777bfa85d upstream.
It should not have been applied to the 3.18-stable tree at all.
Reported-by: Greg Kaiser <[email protected]>
Cc: Bin Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/musb/musb_host.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1294,7 +1294,6 @@ void musb_host_tx(struct musb *musb, u8
| MUSB_TXCSR_TXPKTRDY);
}
return;
- mdelay(1);
}
done:
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sabrina Dubroca <[email protected]>
commit d1e158e2d7a0a91110b206653f0e02376e809150 upstream.
info is in network byte order, change it back to host byte order
before use. In particular, the current code sets the MTU of the tunnel
to a wrong (too big) value.
Fixes: c12b395a4664 ("gre: Support GRE over IPv6")
Signed-off-by: Sabrina Dubroca <[email protected]>
Acked-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ip6_gre.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/net/ipv6/ip6_gre.c
+++ b/net/ipv6/ip6_gre.c
@@ -421,7 +421,7 @@ static void ip6gre_err(struct sk_buff *s
if (code == ICMPV6_HDR_FIELD)
teli = ip6_tnl_parse_tlv_enc_lim(skb, skb->data);
- if (teli && teli == info - 2) {
+ if (teli && teli == be32_to_cpu(info) - 2) {
tel = (struct ipv6_tlv_tnl_enc_lim *) &skb->data[teli];
if (tel->encap_limit == 0) {
net_warn_ratelimited("%s: Too small encapsulation limit or routing loop in tunnel!\n",
@@ -433,7 +433,7 @@ static void ip6gre_err(struct sk_buff *s
}
break;
case ICMPV6_PKT_TOOBIG:
- mtu = info - offset;
+ mtu = be32_to_cpu(info) - offset;
if (mtu < IPV6_MIN_MTU)
mtu = IPV6_MIN_MTU;
t->dev->mtu = mtu;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Avraham Stern <[email protected]>
commit 6e46d8ce894374fc135c96a8d1057c6af1fef237 upstream.
When HW ROC is supported it is possible that after the HW notified
that the ROC has started, the ROC was cancelled and another ROC was
added while the hw_roc_start worker is waiting on the mutex (since
cancelling the ROC and adding another one also holds the same mutex).
As a result, the hw_roc_start worker will continue to run after the
new ROC is added but before it is actually started by the HW.
This may result in notifying userspace that the ROC has started before
it actually does, or in case of management tx ROC, in an attempt to
tx while not on the right channel.
In addition, when the driver will notify mac80211 that the second ROC
has started, mac80211 will warn that this ROC has already been
notified.
Fix this by flushing the hw_roc_start work before cancelling an ROC.
Signed-off-by: Avraham Stern <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/offchannel.c | 2 ++
1 file changed, 2 insertions(+)
--- a/net/mac80211/offchannel.c
+++ b/net/mac80211/offchannel.c
@@ -469,6 +469,8 @@ void ieee80211_roc_purge(struct ieee8021
struct ieee80211_roc_work *roc, *tmp;
LIST_HEAD(tmp_list);
+ flush_work(&local->hw_roc_start);
+
mutex_lock(&local->mtx);
list_for_each_entry_safe(roc, tmp, &local->roc_list, list) {
if (sdata && roc->sdata != sdata)
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tang Junhui <[email protected]>
commit 9baf30972b5568d8b5bc8b3c46a6ec5b58100463 upstream.
gc and write-back get raced (see the email "bcache get stucked" I sended
before):
gc thread write-back thread
| |bch_writeback_thread()
|bch_gc_thread() |
| |==>read_dirty()
|==>bch_btree_gc() |
|==>btree_root() //get btree root |
| //node write locker |
|==>bch_btree_gc_root() |
| |==>read_dirty_submit()
| |==>write_dirty()
| |==>continue_at(cl,
| | write_dirty_finish,
| | system_wq);
| |==>write_dirty_finish()//excute
| | //in system_wq
| |==>bch_btree_insert()
| |==>bch_btree_map_leaf_nodes()
| |==>__bch_btree_map_nodes()
| |==>btree_root //try to get btree
| | //root node read
| | //lock
| |-----stuck here
|==>bch_btree_set_root()
|==>bch_journal_meta()
|==>bch_journal()
|==>journal_try_write()
|==>journal_write_unlocked() //journal_full(&c->journal)
| //condition satisfied
|==>continue_at(cl, journal_write, system_wq); //try to excute
| //journal_write in system_wq
| //but work queue is excuting
| //write_dirty_finish()
|==>closure_sync(); //wait journal_write execute
| //over and wake up gc,
|-------------stuck here
|==>release root node write locker
This patch alloc a separate work-queue for write-back thread to avoid such
race.
(Commit log re-organized by Coly Li to pass checkpatch.pl checking)
Signed-off-by: Tang Junhui <[email protected]>
Acked-by: Coly Li <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/bcache/bcache.h | 1 +
drivers/md/bcache/super.c | 2 ++
drivers/md/bcache/writeback.c | 9 +++++++--
3 files changed, 10 insertions(+), 2 deletions(-)
--- a/drivers/md/bcache/bcache.h
+++ b/drivers/md/bcache/bcache.h
@@ -348,6 +348,7 @@ struct cached_dev {
/* Limit number of writeback bios in flight */
struct semaphore in_flight;
struct task_struct *writeback_thread;
+ struct workqueue_struct *writeback_write_wq;
struct keybuf writeback_keys;
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -1087,6 +1087,8 @@ static void cached_dev_free(struct closu
cancel_delayed_work_sync(&dc->writeback_rate_update);
if (!IS_ERR_OR_NULL(dc->writeback_thread))
kthread_stop(dc->writeback_thread);
+ if (dc->writeback_write_wq)
+ destroy_workqueue(dc->writeback_write_wq);
mutex_lock(&bch_register_lock);
--- a/drivers/md/bcache/writeback.c
+++ b/drivers/md/bcache/writeback.c
@@ -191,7 +191,7 @@ static void write_dirty(struct closure *
closure_bio_submit(&io->bio, cl, &io->dc->disk);
- continue_at(cl, write_dirty_finish, system_wq);
+ continue_at(cl, write_dirty_finish, io->dc->writeback_write_wq);
}
static void read_dirty_endio(struct bio *bio, int error)
@@ -211,7 +211,7 @@ static void read_dirty_submit(struct clo
closure_bio_submit(&io->bio, cl, &io->dc->disk);
- continue_at(cl, write_dirty, system_wq);
+ continue_at(cl, write_dirty, io->dc->writeback_write_wq);
}
static void read_dirty(struct cached_dev *dc)
@@ -523,6 +523,11 @@ void bch_cached_dev_writeback_init(struc
int bch_cached_dev_writeback_start(struct cached_dev *dc)
{
+ dc->writeback_write_wq = alloc_workqueue("bcache_writeback_wq",
+ WQ_MEM_RECLAIM, 0);
+ if (!dc->writeback_write_wq)
+ return -ENOMEM;
+
dc->writeback_thread = kthread_create(bch_writeback_thread, dc,
"bcache_writeback");
if (IS_ERR(dc->writeback_thread))
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Lyle <[email protected]>
commit 9276717b9e297a62d1151a43d1cd286213f68eb7 upstream.
Most importantly, solve a crash where %llu was used to format signed
numbers. This would cause a buffer overflow when reading sysfs
writeback_rate_debug, as only 20 bytes were allocated for this and
%llu writes 20 characters plus a null.
Always use the units mechanism rather than having different output
paths for simplicity.
Also, correct problems with display output where 1.10 was a larger
number than 1.09, by multiplying by 10 and then dividing by 1024 instead
of dividing by 100. (Remainders of >= 1000 would print as .10).
Minor changes: Always display the decimal point instead of trying to
omit it based on number of digits shown. Decide what units to use
based on 1000 as a threshold, not 1024 (in other words, always print
at most 3 digits before the decimal point).
Signed-off-by: Michael Lyle <[email protected]>
Reported-by: Dmitry Yu Okunev <[email protected]>
Acked-by: Kent Overstreet <[email protected]>
Reviewed-by: Coly Li <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/bcache/util.c | 46 +++++++++++++++++++++++++++++++++-------------
1 file changed, 33 insertions(+), 13 deletions(-)
--- a/drivers/md/bcache/util.c
+++ b/drivers/md/bcache/util.c
@@ -73,24 +73,44 @@ STRTO_H(strtouint, unsigned int)
STRTO_H(strtoll, long long)
STRTO_H(strtoull, unsigned long long)
+/**
+ * bch_hprint() - formats @v to human readable string for sysfs.
+ *
+ * @v - signed 64 bit integer
+ * @buf - the (at least 8 byte) buffer to format the result into.
+ *
+ * Returns the number of bytes used by format.
+ */
ssize_t bch_hprint(char *buf, int64_t v)
{
static const char units[] = "?kMGTPEZY";
- char dec[4] = "";
- int u, t = 0;
+ int u = 0, t;
- for (u = 0; v >= 1024 || v <= -1024; u++) {
- t = v & ~(~0 << 10);
- v >>= 10;
- }
+ uint64_t q;
- if (!u)
- return sprintf(buf, "%llu", v);
-
- if (v < 100 && v > -100)
- snprintf(dec, sizeof(dec), ".%i", t / 100);
-
- return sprintf(buf, "%lli%s%c", v, dec, units[u]);
+ if (v < 0)
+ q = -v;
+ else
+ q = v;
+
+ /* For as long as the number is more than 3 digits, but at least
+ * once, shift right / divide by 1024. Keep the remainder for
+ * a digit after the decimal point.
+ */
+ do {
+ u++;
+
+ t = q & ~(~0 << 10);
+ q >>= 10;
+ } while (q >= 1000);
+
+ if (v < 0)
+ /* '-', up to 3 digits, '.', 1 digit, 1 character, null;
+ * yields 8 bytes.
+ */
+ return sprintf(buf, "-%llu.%i%c", q, t * 10 / 1024, units[u]);
+ else
+ return sprintf(buf, "%llu.%i%c", q, t * 10 / 1024, units[u]);
}
ssize_t bch_snprint_string_list(char *buf, size_t size, const char * const list[],
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tang Junhui <[email protected]>
commit 175206cf9ab63161dec74d9cd7f9992e062491f5 upstream.
bcache uses a Proportion-Differentiation Controller algorithm to control
writeback rate to cached devices. In the PD controller algorithm, dirty
stripes of thin flash device should not be counted in, because flash only
volumes never write back dirty data.
Currently dirty stripe counter for thin flash device is not initialized
when the thin flash device starts. Which means the following calculation
in PD controller will reference an undefined dirty stripes number, and
all cached devices attached to the same cache set where the thin flash
device lies on may have an inaccurate writeback rate.
This patch calles bch_sectors_dirty_init() in flash_dev_run(), to
correctly initialize dirty stripe counter when the thin flash device
starts to run. This patch also does following parameter data type change,
-void bch_sectors_dirty_init(struct cached_dev *dc);
+void bch_sectors_dirty_init(struct bcache_device *);
to call this function conveniently in flash_dev_run().
(Commit log is composed by Coly Li)
Signed-off-by: Tang Junhui <[email protected]>
Reviewed-by: Coly Li <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/bcache/super.c | 3 ++-
drivers/md/bcache/writeback.c | 8 ++++----
drivers/md/bcache/writeback.h | 2 +-
3 files changed, 7 insertions(+), 6 deletions(-)
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -1054,7 +1054,7 @@ int bch_cached_dev_attach(struct cached_
}
if (BDEV_STATE(&dc->sb) == BDEV_STATE_DIRTY) {
- bch_sectors_dirty_init(dc);
+ bch_sectors_dirty_init(&dc->disk);
atomic_set(&dc->has_dirty, 1);
atomic_inc(&dc->count);
bch_writeback_queue(dc);
@@ -1258,6 +1258,7 @@ static int flash_dev_run(struct cache_se
goto err;
bcache_device_attach(d, c, u - c->uuids);
+ bch_sectors_dirty_init(d);
bch_flash_dev_request_init(d);
add_disk(d->disk);
--- a/drivers/md/bcache/writeback.c
+++ b/drivers/md/bcache/writeback.c
@@ -488,17 +488,17 @@ static int sectors_dirty_init_fn(struct
return MAP_CONTINUE;
}
-void bch_sectors_dirty_init(struct cached_dev *dc)
+void bch_sectors_dirty_init(struct bcache_device *d)
{
struct sectors_dirty_init op;
bch_btree_op_init(&op.op, -1);
- op.inode = dc->disk.id;
+ op.inode = d->id;
- bch_btree_map_keys(&op.op, dc->disk.c, &KEY(op.inode, 0, 0),
+ bch_btree_map_keys(&op.op, d->c, &KEY(op.inode, 0, 0),
sectors_dirty_init_fn, 0);
- dc->disk.sectors_dirty_last = bcache_dev_sectors_dirty(&dc->disk);
+ d->sectors_dirty_last = bcache_dev_sectors_dirty(d);
}
void bch_cached_dev_writeback_init(struct cached_dev *dc)
--- a/drivers/md/bcache/writeback.h
+++ b/drivers/md/bcache/writeback.h
@@ -85,7 +85,7 @@ static inline void bch_writeback_add(str
void bcache_dev_sectors_dirty_add(struct cache_set *, unsigned, uint64_t, int);
-void bch_sectors_dirty_init(struct cached_dev *dc);
+void bch_sectors_dirty_init(struct bcache_device *);
void bch_cached_dev_writeback_init(struct cached_dev *);
int bch_cached_dev_writeback_start(struct cached_dev *);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jose Abreu <[email protected]>
commit 1ee55a8f7f6b7ca4c0c59e0b4b4e3584a085c2d3 upstream.
I recently came upon a scenario where I would get a double fault
machine check exception tiriggered by a kernel module.
However the ensuing crash stacktrace (ksym lookup) was not working
correctly.
Turns out that machine check auto-disables MMU while modules are allocated
in kernel vaddr spapce.
This patch re-enables the MMU before start printing the stacktrace
making stacktracing of modules work upon a fatal exception.
Signed-off-by: Jose Abreu <[email protected]>
Reviewed-by: Alexey Brodkin <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
[vgupta: moved code into low level handler to avoid in 2 places]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arc/kernel/entry.S | 6 ++++++
arch/arc/mm/tlb.c | 3 ---
2 files changed, 6 insertions(+), 3 deletions(-)
--- a/arch/arc/kernel/entry.S
+++ b/arch/arc/kernel/entry.S
@@ -315,6 +315,12 @@ ENTRY(EV_MachineCheck)
lr r0, [efa]
mov r1, sp
+ ; hardware auto-disables MMU, re-enable it to allow kernel vaddr
+ ; access for say stack unwinding of modules for crash dumps
+ lr r3, [ARC_REG_PID]
+ or r3, r3, MMU_ENABLE
+ sr r3, [ARC_REG_PID]
+
lsr r3, r2, 8
bmsk r3, r3, 7
brne r3, ECR_C_MCHK_DUP_TLB, 1f
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -689,9 +689,6 @@ void do_tlb_overlap_fault(unsigned long
local_irq_save(flags);
- /* re-enable the MMU */
- write_aux_reg(ARC_REG_PID, MMU_ENABLE | read_aux_reg(ARC_REG_PID));
-
/* loop thru all sets of TLB */
for (set = 0; set < mmu->sets; set++) {
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tony Asleson <[email protected]>
commit 77fa100f27475d08a569b9d51c17722130f089e7 upstream.
If you encounter any errors in bch_cached_dev_attach it will return
a negative error code. The variable 'v' which stores the result is
unsigned, thus user space sees a very large value returned for bytes
written which can cause incorrect user space behavior. Utilize 1
signed variable to use throughout the function to preserve error return
capability.
Signed-off-by: Tony Asleson <[email protected]>
Acked-by: Coly Li <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/bcache/sysfs.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/md/bcache/sysfs.c
+++ b/drivers/md/bcache/sysfs.c
@@ -191,7 +191,7 @@ STORE(__cached_dev)
{
struct cached_dev *dc = container_of(kobj, struct cached_dev,
disk.kobj);
- unsigned v = size;
+ ssize_t v = size;
struct cache_set *c;
struct kobj_uevent_env *env;
@@ -226,7 +226,7 @@ STORE(__cached_dev)
bch_cached_dev_run(dc);
if (attr == &sysfs_cache_mode) {
- ssize_t v = bch_read_string_list(buf, bch_cache_modes + 1);
+ v = bch_read_string_list(buf, bch_cache_modes + 1);
if (v < 0)
return v;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tang Junhui <[email protected]>
commit a8394090a9129b40f9d90dcb7f4a49d60c727ca6 upstream.
__update_write_rate() uses a Proportion-Differentiation Controller
algorithm to control writeback rate. A dirty target number is used in
this PD controller to control writeback rate. A larger target number
will make the writeback rate smaller, on the versus, a smaller target
number will make the writeback rate larger.
bcache uses the following steps to calculate the target number,
1) cache_sectors = all-buckets-of-cache-set * buckets-size
2) cache_dirty_target = cache_sectors * cached-device-writeback_percent
3) target = cache_dirty_target *
(sectors-of-cached-device/sectors-of-all-cached-devices-of-this-cache-set)
The calculation at step 1) for cache_sectors is incorrect, which does
not consider dirty blocks occupied by flash only volume.
A flash only volume can be took as a bcache device without cached
device. All data sectors allocated for it are persistent on cache device
and marked dirty, they are not touched by bcache writeback and garbage
collection code. So data blocks of flash only volume should be ignore
when calculating cache_sectors of cache set.
Current code does not subtract dirty sectors of flash only volume, which
results a larger target number from the above 3 steps. And in sequence
the cache device's writeback rate is smaller then a correct value,
writeback speed is slower on all cached devices.
This patch fixes the incorrect slower writeback rate by subtracting
dirty sectors of flash only volumes in __update_writeback_rate().
(Commit log composed by Coly Li to pass checkpatch.pl checking)
Signed-off-by: Tang Junhui <[email protected]>
Reviewed-by: Coly Li <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/bcache/writeback.c | 3 ++-
drivers/md/bcache/writeback.h | 19 +++++++++++++++++++
2 files changed, 21 insertions(+), 1 deletion(-)
--- a/drivers/md/bcache/writeback.c
+++ b/drivers/md/bcache/writeback.c
@@ -21,7 +21,8 @@
static void __update_writeback_rate(struct cached_dev *dc)
{
struct cache_set *c = dc->disk.c;
- uint64_t cache_sectors = c->nbuckets * c->sb.bucket_size;
+ uint64_t cache_sectors = c->nbuckets * c->sb.bucket_size -
+ bcache_flash_devs_sectors_dirty(c);
uint64_t cache_dirty_target =
div_u64(cache_sectors * dc->writeback_percent, 100);
--- a/drivers/md/bcache/writeback.h
+++ b/drivers/md/bcache/writeback.h
@@ -14,6 +14,25 @@ static inline uint64_t bcache_dev_sector
return ret;
}
+static inline uint64_t bcache_flash_devs_sectors_dirty(struct cache_set *c)
+{
+ uint64_t i, ret = 0;
+
+ mutex_lock(&bch_register_lock);
+
+ for (i = 0; i < c->nr_uuids; i++) {
+ struct bcache_device *d = c->devices[i];
+
+ if (!d || !UUID_FLASH_ONLY(&c->uuids[i]))
+ continue;
+ ret += bcache_dev_sectors_dirty(d);
+ }
+
+ mutex_unlock(&bch_register_lock);
+
+ return ret;
+}
+
static inline unsigned offset_to_stripe(struct bcache_device *d,
uint64_t offset)
{
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guenter Roeck <[email protected]>
commit 7e09f7d5c790278ab98e5f2c22307ebe8ad6e8ba upstream.
The size of uvc_control_mapping is user controlled leading to a
potential heap overflow in the uvc driver. This adds a check to verify
the user provided size fits within the bounds of the defined buffer
size.
Originally-from: Richard Simmons <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/uvc/uvc_ctrl.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/media/usb/uvc/uvc_ctrl.c
+++ b/drivers/media/usb/uvc/uvc_ctrl.c
@@ -2001,6 +2001,13 @@ int uvc_ctrl_add_mapping(struct uvc_vide
goto done;
}
+ /* Validate the user-provided bit-size and offset */
+ if (mapping->size > 32 ||
+ mapping->offset + mapping->size > ctrl->info.size * 8) {
+ ret = -EINVAL;
+ goto done;
+ }
+
list_for_each_entry(map, &ctrl->info.mappings, list) {
if (mapping->id == map->id) {
uvc_trace(UVC_TRACE_CONTROL, "Can't add mapping '%s', "
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
commit 4b758df21ee7081ab41448d21d60367efaa625b3 upstream.
If blkdev_get_by_path() in register_bcache() fails, we try to lookup the
block device using lookup_bdev() to detect which situation we are in to
properly report error. However we never drop the reference returned to
us from lookup_bdev(). Fix that.
Signed-off-by: Jan Kara <[email protected]>
Acked-by: Coly Li <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/bcache/super.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -1997,6 +1997,8 @@ static ssize_t register_bcache(struct ko
else
err = "device busy";
mutex_unlock(&bch_register_lock);
+ if (!IS_ERR(bdev))
+ bdput(bdev);
if (attr == &ksysfs_register_quiet)
goto out;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Mentz <[email protected]>
commit 9c7ba1d7634cef490b85bc64c4091ff004821bfd upstream.
Certain syscalls like recvmmsg support 64 bit timespec values for the
X32 ABI. The helper function compat_put_timespec converts a timespec
value to a 32 bit or 64 bit value depending on what ABI is used. The
v4l2 compat layer, however, is not designed to support 64 bit timespec
values and always uses 32 bit values. Hence, compat_put_timespec must
not be used.
Without this patch, user space will be provided with bad timestamp
values from the VIDIOC_DQEVENT ioctl. Also, fields of the struct
v4l2_event32 that come immediately after timestamp get overwritten,
namely the field named id.
Fixes: 81993e81a994 ("compat: Get rid of (get|put)_compat_time(val|spec)")
Cc: H. Peter Anvin <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Tiffany Lin <[email protected]>
Cc: Ricardo Ribalda Delgado <[email protected]>
Cc: Sakari Ailus <[email protected]>
Signed-off-by: Daniel Mentz <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
+++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c
@@ -747,7 +747,8 @@ static int put_v4l2_event32(struct v4l2_
copy_to_user(&up->u, &kp->u, sizeof(kp->u)) ||
put_user(kp->pending, &up->pending) ||
put_user(kp->sequence, &up->sequence) ||
- compat_put_timespec(&kp->timestamp, &up->timestamp) ||
+ put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) ||
+ put_user(kp->timestamp.tv_nsec, &up->timestamp.tv_nsec) ||
put_user(kp->id, &up->id) ||
copy_to_user(up->reserved, kp->reserved, 8 * sizeof(__u32)))
return -EFAULT;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Aleksandr Bezzubikov <[email protected]>
commit 48b79a14505349a29b3e20f03619ada9b33c4b17 upstream.
An SHPC may generate MSIs to notify software about slot or controller
events (SHPC spec r1.0, sec 4.7). A PCI device can only generate an MSI if
it has bus mastering enabled.
Enable bus mastering if the bridge contains an SHPC that uses MSI for event
notifications.
Signed-off-by: Aleksandr Bezzubikov <[email protected]>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Marcel Apfelbaum <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/hotplug/shpchp_hpc.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -1062,6 +1062,8 @@ int shpc_init(struct controller *ctrl, s
if (rc) {
ctrl_info(ctrl, "Can't get msi for the hotplug controller\n");
ctrl_info(ctrl, "Use INTx for the hotplug controller\n");
+ } else {
+ pci_set_master(pdev);
}
rc = request_irq(ctrl->pci_dev->irq, shpc_isr, IRQF_SHARED,
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit 32a805baf0fb70b6dbedefcd7249ac7f580f9e3b ]
IPv6 FIB should use FIB6_TABLE_HASHSZ, not FIB_TABLE_HASHSZ.
Fixes: ba1cc08d9488 ("ipv6: fix memory leak with multiple tables during netns destruction")
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ip6_fib.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -1793,7 +1793,7 @@ static void fib6_net_exit(struct net *ne
rt6_ifdown(net, NULL);
del_timer_sync(&net->ipv6.ip6_fib_timer);
- for (i = 0; i < FIB_TABLE_HASHSZ; i++) {
+ for (i = 0; i < FIB6_TABLE_HASHSZ; i++) {
struct hlist_head *head = &net->ipv6.fib_table_hash[i];
struct hlist_node *tmp;
struct fib6_table *tb;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wei Wang <[email protected]>
[ Upstream commit 499350a5a6e7512d9ed369ed63a4244b6536f4f8 ]
When tcp_disconnect() is called, inet_csk_delack_init() sets
icsk->icsk_ack.rcv_mss to 0.
This could potentially cause tcp_recvmsg() => tcp_cleanup_rbuf() =>
__tcp_select_window() call path to have division by 0 issue.
So this patch initializes rcv_mss to TCP_MIN_MSS instead of 0.
Reported-by: Andrey Konovalov <[email protected]>
Signed-off-by: Wei Wang <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: Neal Cardwell <[email protected]>
Signed-off-by: Yuchung Cheng <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/tcp.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -2265,6 +2265,10 @@ int tcp_disconnect(struct sock *sk, int
tcp_set_ca_state(sk, TCP_CA_Open);
tcp_clear_retrans(tp);
inet_csk_delack_init(sk);
+ /* Initialize rcv_mss to TCP_MIN_MSS to avoid division by 0
+ * issue in __tcp_select_window()
+ */
+ icsk->icsk_ack.rcv_mss = TCP_MIN_MSS;
tcp_init_send_head(sk);
memset(&tp->rx_opt, 0, sizeof(tp->rx_opt));
__sk_dst_reset(sk);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Baohong Liu <[email protected]>
commit 170b3b1050e28d1ba0700e262f0899ffa4fccc52 upstream.
Currently trace_clock timestamps are applied to both regular and max
buffers only for global trace. For instance trace, trace_clock
timestamps are applied only to regular buffer. But, regular and max
buffers can be swapped, for example, following a snapshot. So, for
instance trace, bad timestamps can be seen following a snapshot.
Let's apply trace_clock timestamps to instance max buffer as well.
Link: http://lkml.kernel.org/r/ebdb168d0be042dcdf51f81e696b17fabe3609c1.1504642143.git.tom.zanussi@linux.intel.com
Fixes: 277ba0446 ("tracing: Add interface to allow multiple trace buffers")
Signed-off-by: Baohong Liu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -4966,7 +4966,7 @@ static int tracing_set_clock(struct trac
tracing_reset_online_cpus(&tr->trace_buffer);
#ifdef CONFIG_TRACER_MAX_TRACE
- if (tr->flags & TRACE_ARRAY_FL_GLOBAL && tr->max_buffer.buffer)
+ if (tr->max_buffer.buffer)
ring_buffer_set_clock(tr->max_buffer.buffer, trace_clocks[i].func);
tracing_reset_online_cpus(&tr->max_buffer);
#endif
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jaegeuk Kim <[email protected]>
commit 125c9fb1ccb53eb2ea9380df40f3c743f3fb2fed upstream.
We need to check HOT_DATA to truncate any previous data block when doing
roll-forward recovery.
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/f2fs/recovery.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/f2fs/recovery.c
+++ b/fs/f2fs/recovery.c
@@ -263,7 +263,7 @@ static int check_index_in_prev_nodes(str
return 0;
/* Get the previous summary */
- for (i = CURSEG_WARM_DATA; i <= CURSEG_COLD_DATA; i++) {
+ for (i = CURSEG_HOT_DATA; i <= CURSEG_COLD_DATA; i++) {
struct curseg_info *curseg = CURSEG_I(sbi, i);
if (curseg->segno == segno) {
sum = curseg->sum_blk->entries[blkoff];
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steven Rostedt (VMware) <[email protected]>
commit 46320a6acc4fb58f04bcf78c4c942cc43b20f986 upstream.
In the second iteration of trace_selftest_ops(), the error goto label is
wrong in the case where trace_selftest_test_global_cnt is off. In the
case of error, it leaks the dynamic ops that was allocated.
Fixes: 95950c2e ("ftrace: Add self-tests for multiple function trace users")
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace_selftest.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/trace/trace_selftest.c
+++ b/kernel/trace/trace_selftest.c
@@ -272,7 +272,7 @@ static int trace_selftest_ops(struct tra
goto out_free;
if (cnt > 1) {
if (trace_selftest_test_global_cnt == 0)
- goto out;
+ goto out_free;
}
if (trace_selftest_test_dyn_cnt == 0)
goto out_free;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hannes Reinecke <[email protected]>
commit 3e0097499839e0fe3af380410eababe5a47c4cf9 upstream.
When calling SG_GET_REQUEST_TABLE ioctl only a half-filled table is
returned; the remaining part will then contain stale kernel memory
information. This patch zeroes out the entire table to avoid this
issue.
Signed-off-by: Hannes Reinecke <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/sg.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -865,7 +865,6 @@ sg_fill_request_table(Sg_fd *sfp, sg_req
list_for_each_entry(srp, &sfp->rq_list, entry) {
if (val > SG_MAX_QUEUE)
break;
- memset(&rinfo[val], 0, SZ_SG_REQ_INFO);
rinfo[val].req_state = srp->done + 1;
rinfo[val].problem =
srp->header.masked_status &
@@ -1082,8 +1081,8 @@ sg_ioctl(struct file *filp, unsigned int
else {
sg_req_info_t *rinfo;
- rinfo = kmalloc(SZ_SG_REQ_INFO * SG_MAX_QUEUE,
- GFP_KERNEL);
+ rinfo = kzalloc(SZ_SG_REQ_INFO * SG_MAX_QUEUE,
+ GFP_KERNEL);
if (!rinfo)
return -ENOMEM;
read_lock_irqsave(&sfp->rq_list_lock, iflags);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter <[email protected]>
commit bd46fc406b30d1db1aff8dabaff8d18bb423fdcf upstream.
If "val" is SG_MAX_QUEUE then we are one element beyond the end of the
"rinfo" array so the > should be >=.
Fixes: 109bade9c625 ("scsi: sg: use standard lists for sg_requests")
Signed-off-by: Dan Carpenter <[email protected]>
Acked-by: Douglas Gilbert <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/sg.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -1056,7 +1056,7 @@ sg_ioctl(struct file *filp, unsigned int
read_lock_irqsave(&sfp->rq_list_lock, iflags);
val = 0;
list_for_each_entry(srp, &sfp->rq_list, entry) {
- if (val > SG_MAX_QUEUE)
+ if (val >= SG_MAX_QUEUE)
break;
memset(&rinfo[val], 0, SZ_SG_REQ_INFO);
rinfo[val].req_state = srp->done + 1;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hannes Reinecke <[email protected]>
commit 136e57bf43dc4babbfb8783abbf707d483cacbe3 upstream.
Unused.
Signed-off-by: Hannes Reinecke <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Tested-by: Johannes Thumshirn <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/sg.c | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -157,7 +157,6 @@ typedef struct sg_fd { /* holds the sta
int timeout; /* defaults to SG_DEFAULT_TIMEOUT */
int timeout_user; /* defaults to SG_DEFAULT_TIMEOUT_USER */
Sg_scatter_hold reserve; /* buffer held for this file descriptor */
- unsigned save_scat_len; /* original length of trunc. scat. element */
Sg_request *headrp; /* head of request slist, NULL->empty */
struct fasync_struct *async_qp; /* used by asynchronous notification */
Sg_request req_arr[SG_MAX_QUEUE]; /* used as singly-linked list */
@@ -2105,7 +2104,6 @@ sg_unlink_reserve(Sg_fd * sfp, Sg_reques
req_schp->pages = NULL;
req_schp->page_order = 0;
req_schp->sglist_len = 0;
- sfp->save_scat_len = 0;
srp->res_used = 0;
/* Called without mutex lock to avoid deadlock */
sfp->res_in_use = 0;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steffen Maier <[email protected]>
commit fdb7cee3b9e3c561502e58137a837341f10cbf8b upstream.
At the default trace level, we only trace unsuccessful events including
FSF responses.
zfcp_dbf_hba_fsf_response() only used protocol status and FSF status to
decide on an unsuccessful response. However, this is only one of multiple
possible sources determining a failed struct zfcp_fsf_req.
An FSF request can also "fail" if its response runs into an ERP timeout
or if it gets dismissed because a higher level recovery was triggered
[trace tags "erscf_1" or "erscf_2" in zfcp_erp_strategy_check_fsfreq()].
FSF requests with ERP timeout are:
FSF_QTCB_EXCHANGE_CONFIG_DATA, FSF_QTCB_EXCHANGE_PORT_DATA,
FSF_QTCB_OPEN_PORT_WITH_DID or FSF_QTCB_CLOSE_PORT or
FSF_QTCB_CLOSE_PHYSICAL_PORT for target ports,
FSF_QTCB_OPEN_LUN, FSF_QTCB_CLOSE_LUN.
One example is slow queue processing which can cause follow-on errors,
e.g. FSF_PORT_ALREADY_OPEN after FSF_QTCB_OPEN_PORT_WITH_DID timed out.
In order to see the root cause, we need to see late responses even if the
channel presented them successfully with FSF_PROT_GOOD and FSF_GOOD.
Example trace records formatted with zfcpdbf from the s390-tools package:
Timestamp : ...
Area : REC
Subarea : 00
Level : 1
Exception : -
CPU ID : ..
Caller : ...
Record ID : 1
Tag : fcegpf1
LUN : 0xffffffffffffffff
WWPN : 0x<WWPN>
D_ID : 0x00<D_ID>
Adapter status : 0x5400050b
Port status : 0x41200000
LUN status : 0x00000000
Ready count : 0x00000001
Running count : 0x...
ERP want : 0x02 ZFCP_ERP_ACTION_REOPEN_PORT
ERP need : 0x02 ZFCP_ERP_ACTION_REOPEN_PORT
|
Timestamp : ... 30 seconds later
Area : REC
Subarea : 00
Level : 1
Exception : -
CPU ID : ..
Caller : ...
Record ID : 2
Tag : erscf_2
LUN : 0xffffffffffffffff
WWPN : 0x<WWPN>
D_ID : 0x00<D_ID>
Adapter status : 0x5400050b
Port status : 0x41200000
LUN status : 0x00000000
Request ID : 0x<request_ID>
ERP status : 0x10000000 ZFCP_STATUS_ERP_TIMEDOUT
ERP step : 0x0800 ZFCP_ERP_STEP_PORT_OPENING
ERP action : 0x02 ZFCP_ERP_ACTION_REOPEN_PORT
ERP count : 0x00
|
Timestamp : ... later than previous record
Area : HBA
Subarea : 00
Level : 5 > default level => 3 <= default level
Exception : -
CPU ID : 00
Caller : ...
Record ID : 1
Tag : fs_qtcb => fs_rerr
Request ID : 0x<request_ID>
Request status : 0x00001010 ZFCP_STATUS_FSFREQ_DISMISSED
| ZFCP_STATUS_FSFREQ_CLEANUP
FSF cmnd : 0x00000005
FSF sequence no: 0x...
FSF issued : ... > 30 seconds ago
FSF stat : 0x00000000 FSF_GOOD
FSF stat qual : 00000000 00000000 00000000 00000000
Prot stat : 0x00000001 FSF_PROT_GOOD
Prot stat qual : 00000000 00000000 00000000 00000000
Port handle : 0x...
LUN handle : 0x00000000
QTCB log length: ...
QTCB log info : ...
In case of problems detecting that new responses are waiting on the input
queue, we sooner or later trigger adapter recovery due to an FSF request
timeout (trace tag "fsrth_1").
FSF requests with FSF request timeout are:
typically FSF_QTCB_ABORT_FCP_CMND; but theoretically also
FSF_QTCB_EXCHANGE_CONFIG_DATA or FSF_QTCB_EXCHANGE_PORT_DATA via sysfs,
FSF_QTCB_OPEN_PORT_WITH_DID or FSF_QTCB_CLOSE_PORT for WKA ports,
FSF_QTCB_FCP_CMND for task management function (LUN / target reset).
One or more pending requests can meanwhile have FSF_PROT_GOOD and FSF_GOOD
because the channel filled in the response via DMA into the request's QTCB.
In a theroretical case, inject code can create an erroneous FSF request
on purpose. If data router is enabled, it uses deferred error reporting.
A READ SCSI command can succeed with FSF_PROT_GOOD, FSF_GOOD, and
SAM_STAT_GOOD. But on writing the read data to host memory via DMA,
it can still fail, e.g. if an intentionally wrong scatter list does not
provide enough space. Rather than getting an unsuccessful response,
we get a QDIO activate check which in turn triggers adapter recovery.
One or more pending requests can meanwhile have FSF_PROT_GOOD and FSF_GOOD
because the channel filled in the response via DMA into the request's QTCB.
Example trace records formatted with zfcpdbf from the s390-tools package:
Timestamp : ...
Area : HBA
Subarea : 00
Level : 6 > default level => 3 <= default level
Exception : -
CPU ID : ..
Caller : ...
Record ID : 1
Tag : fs_norm => fs_rerr
Request ID : 0x<request_ID2>
Request status : 0x00001010 ZFCP_STATUS_FSFREQ_DISMISSED
| ZFCP_STATUS_FSFREQ_CLEANUP
FSF cmnd : 0x00000001
FSF sequence no: 0x...
FSF issued : ...
FSF stat : 0x00000000 FSF_GOOD
FSF stat qual : 00000000 00000000 00000000 00000000
Prot stat : 0x00000001 FSF_PROT_GOOD
Prot stat qual : ........ ........ 00000000 00000000
Port handle : 0x...
LUN handle : 0x...
|
Timestamp : ...
Area : SCSI
Subarea : 00
Level : 3
Exception : -
CPU ID : ..
Caller : ...
Record ID : 1
Tag : rsl_err
Request ID : 0x<request_ID2>
SCSI ID : 0x...
SCSI LUN : 0x...
SCSI result : 0x000e0000 DID_TRANSPORT_DISRUPTED
SCSI retries : 0x00
SCSI allowed : 0x05
SCSI scribble : 0x<request_ID2>
SCSI opcode : 28... Read(10)
FCP rsp inf cod: 0x00
FCP rsp IU : 00000000 00000000 00000000 00000000
^^ SAM_STAT_GOOD
00000000 00000000
Only with luck in both above cases, we could see a follow-on trace record
of an unsuccesful event following a successful but late FSF response with
FSF_PROT_GOOD and FSF_GOOD. Typically this was the case for I/O requests
resulting in a SCSI trace record "rsl_err" with DID_TRANSPORT_DISRUPTED
[On ZFCP_STATUS_FSFREQ_DISMISSED, zfcp_fsf_protstatus_eval() sets
ZFCP_STATUS_FSFREQ_ERROR seen by the request handler functions as failure].
However, the reason for this follow-on trace was invisible because the
corresponding HBA trace record was missing at the default trace level
(by default hidden records with tags "fs_norm", "fs_qtcb", or "fs_open").
On adapter recovery, after we had shut down the QDIO queues, we perform
unsuccessful pseudo completions with flag ZFCP_STATUS_FSFREQ_DISMISSED
for each pending FSF request in zfcp_fsf_req_dismiss_all().
In order to find the root cause, we need to see all pseudo responses even
if the channel presented them successfully with FSF_PROT_GOOD and FSF_GOOD.
Therefore, check zfcp_fsf_req.status for ZFCP_STATUS_FSFREQ_DISMISSED
or ZFCP_STATUS_FSFREQ_ERROR and trace with a new tag "fs_rerr".
It does not matter that there are numerous places which set
ZFCP_STATUS_FSFREQ_ERROR after the location where we trace an FSF response
early. These cases are based on protocol status != FSF_PROT_GOOD or
== FSF_PROT_FSF_STATUS_PRESENTED and are thus already traced by default
as trace tag "fs_perr" or "fs_ferr" respectively.
NB: The trace record with tag "fssrh_1" for status read buffers on dismiss
all remains. zfcp_fsf_req_complete() handles this and returns early.
All other FSF request types are handled separately and as described above.
Signed-off-by: Steffen Maier <[email protected]>
Fixes: 8a36e4532ea1 ("[SCSI] zfcp: enhancement of zfcp debug features")
Fixes: 2e261af84cdb ("[SCSI] zfcp: Only collect FSF/HBA debug data for matching trace levels")
Reviewed-by: Benjamin Block <[email protected]>
Signed-off-by: Benjamin Block <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/scsi/zfcp_dbf.h | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/s390/scsi/zfcp_dbf.h
+++ b/drivers/s390/scsi/zfcp_dbf.h
@@ -291,7 +291,11 @@ void zfcp_dbf_hba_fsf_response(struct zf
{
struct fsf_qtcb *qtcb = req->qtcb;
- if ((qtcb->prefix.prot_status != FSF_PROT_GOOD) &&
+ if (unlikely(req->status & (ZFCP_STATUS_FSFREQ_DISMISSED |
+ ZFCP_STATUS_FSFREQ_ERROR))) {
+ zfcp_dbf_hba_fsf_resp("fs_rerr", 3, req);
+
+ } else if ((qtcb->prefix.prot_status != FSF_PROT_GOOD) &&
(qtcb->prefix.prot_status != FSF_PROT_FSF_STATUS_PRESENTED)) {
zfcp_dbf_hba_fsf_resp("fs_perr", 1, req);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steffen Maier <[email protected]>
commit 5d4a3d0a2ff23799b956e5962b886287614e7fad upstream.
Complements debugging aspects of the otherwise functionally complete
v3.17 commit 9cb78c16f5da ("scsi: use 64-bit LUNs").
While I don't have access to a target exporting 3 or 4 level LUNs,
I did test it by explicitly attaching a non-existent fake 4 level LUN
by means of zfcp sysfs attribute "unit_add".
In order to see corresponding trace records of otherwise successful
events, we had to increase the trace level of area SCSI and HBA to 6.
$ echo 6 > /sys/kernel/debug/s390dbf/zfcp_0.0.1880_scsi/level
$ echo 6 > /sys/kernel/debug/s390dbf/zfcp_0.0.1880_hba/level
$ echo 0x4011402240334044 > \
/sys/bus/ccw/drivers/zfcp/0.0.1880/0x50050763031bd327/unit_add
Example output formatted by an updated zfcpdbf from the s390-tools
package interspersed with kernel messages at scsi_logging_level=4605:
Timestamp : ...
Area : REC
Subarea : 00
Level : 1
Exception : -
CPU ID : ..
Caller : 0x...
Record ID : 1
Tag : scsla_1
LUN : 0x4011402240334044
WWPN : 0x50050763031bd327
D_ID : 0x00......
Adapter status : 0x5400050b
Port status : 0x54000001
LUN status : 0x41000000
Ready count : 0x00000001
Running count : 0x00000000
ERP want : 0x01
ERP need : 0x01
scsi 2:0:0:4630896905707208721: scsi scan: INQUIRY pass 1 length 36
scsi 2:0:0:4630896905707208721: scsi scan: INQUIRY successful with code 0x0
Timestamp : ...
Area : HBA
Subarea : 00
Level : 6
Exception : -
CPU ID : ..
Caller : 0x...
Record ID : 1
Tag : fs_norm
Request ID : 0x<inquiry2-req-id>
Request status : 0x00000010
FSF cmnd : 0x00000001
FSF sequence no: 0x...
FSF issued : ...
FSF stat : 0x00000000
FSF stat qual : 00000000 00000000 00000000 00000000
Prot stat : 0x00000001
Prot stat qual : ........ ........ 00000000 00000000
Port handle : 0x...
LUN handle : 0x...
|
Timestamp : ...
Area : SCSI
Subarea : 00
Level : 6
Exception : -
CPU ID : ..
Caller : 0x...
Record ID : 1
Tag : rsl_nor
Request ID : 0x<inquiry2-req-id>
SCSI ID : 0x00000000
SCSI LUN : 0x40224011
SCSI LUN high : 0x40444033 <=======================
SCSI result : 0x00000000
SCSI retries : 0x00
SCSI allowed : 0x03
SCSI scribble : 0x<inquiry2-req-id>
SCSI opcode : 12000000 a4000000 00000000 00000000
FCP rsp inf cod: 0x00
FCP rsp IU : 00000000 00000000 00000000 00000000
00000000 00000000
scsi 2:0:0:4630896905707208721: scsi scan: INQUIRY pass 2 length 164
scsi 2:0:0:4630896905707208721: scsi scan: INQUIRY successful with code 0x0
scsi 2:0:0:4630896905707208721: scsi scan: peripheral device type of 31, \
no device added
Signed-off-by: Steffen Maier <[email protected]>
Fixes: 9cb78c16f5da ("scsi: use 64-bit LUNs")
Reviewed-by: Benjamin Block <[email protected]>
Reviewed-by: Jens Remus <[email protected]>
Signed-off-by: Benjamin Block <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/scsi/zfcp_dbf.c | 2 +-
drivers/s390/scsi/zfcp_dbf.h | 4 +++-
2 files changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/s390/scsi/zfcp_dbf.c
+++ b/drivers/s390/scsi/zfcp_dbf.c
@@ -418,8 +418,8 @@ void zfcp_dbf_scsi(char *tag, struct scs
rec->scsi_retries = sc->retries;
rec->scsi_allowed = sc->allowed;
rec->scsi_id = sc->device->id;
- /* struct zfcp_dbf_scsi needs to be updated to handle 64bit LUNs */
rec->scsi_lun = (u32)sc->device->lun;
+ rec->scsi_lun_64_hi = (u32)(sc->device->lun >> 32);
rec->host_scribble = (unsigned long)sc->host_scribble;
memcpy(rec->scsi_opcode, sc->cmnd,
--- a/drivers/s390/scsi/zfcp_dbf.h
+++ b/drivers/s390/scsi/zfcp_dbf.h
@@ -196,7 +196,7 @@ enum zfcp_dbf_scsi_id {
* @id: unique number of recovery record type
* @tag: identifier string specifying the location of initiation
* @scsi_id: scsi device id
- * @scsi_lun: scsi device logical unit number
+ * @scsi_lun: scsi device logical unit number, low part of 64 bit, old 32 bit
* @scsi_result: scsi result
* @scsi_retries: current retry number of scsi request
* @scsi_allowed: allowed retries
@@ -206,6 +206,7 @@ enum zfcp_dbf_scsi_id {
* @host_scribble: LLD specific data attached to SCSI request
* @pl_len: length of paload stored as zfcp_dbf_pay
* @fsf_rsp: response for fsf request
+ * @scsi_lun_64_hi: scsi device logical unit number, high part of 64 bit
*/
struct zfcp_dbf_scsi {
u8 id;
@@ -222,6 +223,7 @@ struct zfcp_dbf_scsi {
u64 host_scribble;
u16 pl_len;
struct fcp_resp_with_ext fcp_rsp;
+ u32 scsi_lun_64_hi;
} __packed;
/**
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
[ Upstream commit e58f95831e7468d25eb6e41f234842ecfe6f014f ]
gcc-8.0.0 (snapshot) points out that we copy a variable-length string
into a fixed length field using memcpy() with the destination length,
and that ends up copying whatever follows the string:
inlined from 'ql_core_dump' at drivers/net/ethernet/qlogic/qlge/qlge_dbg.c:1106:2:
drivers/net/ethernet/qlogic/qlge/qlge_dbg.c:708:2: error: 'memcpy' reading 15 bytes from a region of size 14 [-Werror=stringop-overflow=]
memcpy(seg_hdr->description, desc, (sizeof(seg_hdr->description)) - 1);
Changing it to use strncpy() will instead zero-pad the destination,
which seems to be the right thing to do here.
The bug is probably harmless, but it seems like a good idea to address
it in stable kernels as well, if only for the purpose of building with
gcc-8 without warnings.
Fixes: a61f80261306 ("qlge: Add ethtool register dump function.")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/qlogic/qlge/qlge_dbg.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/qlogic/qlge/qlge_dbg.c
+++ b/drivers/net/ethernet/qlogic/qlge/qlge_dbg.c
@@ -724,7 +724,7 @@ static void ql_build_coredump_seg_header
seg_hdr->cookie = MPI_COREDUMP_COOKIE;
seg_hdr->segNum = seg_number;
seg_hdr->segSize = seg_size;
- memcpy(seg_hdr->description, desc, (sizeof(seg_hdr->description)) - 1);
+ strncpy(seg_hdr->description, desc, (sizeof(seg_hdr->description)) - 1);
}
/*
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steffen Maier <[email protected]>
commit 71b8e45da51a7b64a23378221c0a5868bd79da4f upstream.
Since commit db007fc5e20c ("[SCSI] Command protection operation"),
scsi_eh_prep_cmnd() saves scmd->prot_op and temporarily resets it to
SCSI_PROT_NORMAL.
Other FCP LLDDs such as qla2xxx and lpfc shield their queuecommand()
to only access any of scsi_prot_sg...() if
(scsi_get_prot_op(cmd) != SCSI_PROT_NORMAL).
Do the same thing for zfcp, which introduced DIX support with
commit ef3eb71d8ba4 ("[SCSI] zfcp: Introduce experimental support for
DIF/DIX").
Otherwise, TUR SCSI commands as part of scsi_eh likely fail in zfcp,
because the regular SCSI command with DIX protection data, that scsi_eh
re-uses in scsi_send_eh_cmnd(), of course still has
(scsi_prot_sg_count() != 0) and so zfcp sends down bogus requests to the
FCP channel hardware.
This causes scsi_eh_test_devices() to have (finish_cmds == 0)
[not SCSI device is online or not scsi_eh_tur() failed]
so regular SCSI commands, that caused / were affected by scsi_eh,
are moved to work_q and scsi_eh_test_devices() itself returns false.
In turn, it unnecessarily escalates in our case in scsi_eh_ready_devs()
beyond host reset to finally scsi_eh_offline_sdevs()
which sets affected SCSI devices offline with the following kernel message:
"kernel: sd H:0:T:L: Device offlined - not ready after error recovery"
Signed-off-by: Steffen Maier <[email protected]>
Fixes: ef3eb71d8ba4 ("[SCSI] zfcp: Introduce experimental support for DIF/DIX")
Reviewed-by: Benjamin Block <[email protected]>
Signed-off-by: Benjamin Block <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/scsi/zfcp_fsf.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -2247,7 +2247,8 @@ int zfcp_fsf_fcp_cmnd(struct scsi_cmnd *
fcp_cmnd = (struct fcp_cmnd *) &req->qtcb->bottom.io.fcp_cmnd;
zfcp_fc_scsi_to_fcp(fcp_cmnd, scsi_cmnd, 0);
- if (scsi_prot_sg_count(scsi_cmnd)) {
+ if ((scsi_get_prot_op(scsi_cmnd) != SCSI_PROT_NORMAL) &&
+ scsi_prot_sg_count(scsi_cmnd)) {
zfcp_qdio_set_data_div(qdio, &req->qdio_req,
scsi_prot_sg_count(scsi_cmnd));
retval = zfcp_qdio_sbals_from_sg(qdio, &req->qdio_req,
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Ellerman <[email protected]>
commit f9effe925039cf54489b5c04e0d40073bb3a123d upstream.
Anton noticed that if we fault part way through emulating an unaligned
instruction, we don't update the DAR to reflect that.
The DAR value is eventually reported back to userspace as the address
in the SEGV signal, and if userspace is using that value to demand
fault then it can be confused by us not setting the value correctly.
This patch is ugly as hell, but is intended to be the minimal fix and
back ports easily.
Signed-off-by: Michael Ellerman <[email protected]>
Reviewed-by: Paul Mackerras <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/align.c | 119 +++++++++++++++++++++++++++-----------------
1 file changed, 74 insertions(+), 45 deletions(-)
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -236,6 +236,28 @@ static int emulate_dcbz(struct pt_regs *
#define SWIZ_PTR(p) ((unsigned char __user *)((p) ^ swiz))
+#define __get_user_or_set_dar(_regs, _dest, _addr) \
+ ({ \
+ int rc = 0; \
+ typeof(_addr) __addr = (_addr); \
+ if (__get_user_inatomic(_dest, __addr)) { \
+ _regs->dar = (unsigned long)__addr; \
+ rc = -EFAULT; \
+ } \
+ rc; \
+ })
+
+#define __put_user_or_set_dar(_regs, _src, _addr) \
+ ({ \
+ int rc = 0; \
+ typeof(_addr) __addr = (_addr); \
+ if (__put_user_inatomic(_src, __addr)) { \
+ _regs->dar = (unsigned long)__addr; \
+ rc = -EFAULT; \
+ } \
+ rc; \
+ })
+
static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr,
unsigned int reg, unsigned int nb,
unsigned int flags, unsigned int instr,
@@ -264,9 +286,10 @@ static int emulate_multiple(struct pt_re
} else {
unsigned long pc = regs->nip ^ (swiz & 4);
- if (__get_user_inatomic(instr,
- (unsigned int __user *)pc))
+ if (__get_user_or_set_dar(regs, instr,
+ (unsigned int __user *)pc))
return -EFAULT;
+
if (swiz == 0 && (flags & SW))
instr = cpu_to_le32(instr);
nb = (instr >> 11) & 0x1f;
@@ -310,31 +333,31 @@ static int emulate_multiple(struct pt_re
((nb0 + 3) / 4) * sizeof(unsigned long));
for (i = 0; i < nb; ++i, ++p)
- if (__get_user_inatomic(REG_BYTE(rptr, i ^ bswiz),
- SWIZ_PTR(p)))
+ if (__get_user_or_set_dar(regs, REG_BYTE(rptr, i ^ bswiz),
+ SWIZ_PTR(p)))
return -EFAULT;
if (nb0 > 0) {
rptr = ®s->gpr[0];
addr += nb;
for (i = 0; i < nb0; ++i, ++p)
- if (__get_user_inatomic(REG_BYTE(rptr,
- i ^ bswiz),
- SWIZ_PTR(p)))
+ if (__get_user_or_set_dar(regs,
+ REG_BYTE(rptr, i ^ bswiz),
+ SWIZ_PTR(p)))
return -EFAULT;
}
} else {
for (i = 0; i < nb; ++i, ++p)
- if (__put_user_inatomic(REG_BYTE(rptr, i ^ bswiz),
- SWIZ_PTR(p)))
+ if (__put_user_or_set_dar(regs, REG_BYTE(rptr, i ^ bswiz),
+ SWIZ_PTR(p)))
return -EFAULT;
if (nb0 > 0) {
rptr = ®s->gpr[0];
addr += nb;
for (i = 0; i < nb0; ++i, ++p)
- if (__put_user_inatomic(REG_BYTE(rptr,
- i ^ bswiz),
- SWIZ_PTR(p)))
+ if (__put_user_or_set_dar(regs,
+ REG_BYTE(rptr, i ^ bswiz),
+ SWIZ_PTR(p)))
return -EFAULT;
}
}
@@ -346,29 +369,32 @@ static int emulate_multiple(struct pt_re
* Only POWER6 has these instructions, and it does true little-endian,
* so we don't need the address swizzling.
*/
-static int emulate_fp_pair(unsigned char __user *addr, unsigned int reg,
- unsigned int flags)
+static int emulate_fp_pair(struct pt_regs *regs, unsigned char __user *addr,
+ unsigned int reg, unsigned int flags)
{
char *ptr0 = (char *) ¤t->thread.TS_FPR(reg);
char *ptr1 = (char *) ¤t->thread.TS_FPR(reg+1);
- int i, ret, sw = 0;
+ int i, sw = 0;
if (reg & 1)
return 0; /* invalid form: FRS/FRT must be even */
if (flags & SW)
sw = 7;
- ret = 0;
+
for (i = 0; i < 8; ++i) {
if (!(flags & ST)) {
- ret |= __get_user(ptr0[i^sw], addr + i);
- ret |= __get_user(ptr1[i^sw], addr + i + 8);
+ if (__get_user_or_set_dar(regs, ptr0[i^sw], addr + i))
+ return -EFAULT;
+ if (__get_user_or_set_dar(regs, ptr1[i^sw], addr + i + 8))
+ return -EFAULT;
} else {
- ret |= __put_user(ptr0[i^sw], addr + i);
- ret |= __put_user(ptr1[i^sw], addr + i + 8);
+ if (__put_user_or_set_dar(regs, ptr0[i^sw], addr + i))
+ return -EFAULT;
+ if (__put_user_or_set_dar(regs, ptr1[i^sw], addr + i + 8))
+ return -EFAULT;
}
}
- if (ret)
- return -EFAULT;
+
return 1; /* exception handled and fixed up */
}
@@ -378,24 +404,27 @@ static int emulate_lq_stq(struct pt_regs
{
char *ptr0 = (char *)®s->gpr[reg];
char *ptr1 = (char *)®s->gpr[reg+1];
- int i, ret, sw = 0;
+ int i, sw = 0;
if (reg & 1)
return 0; /* invalid form: GPR must be even */
if (flags & SW)
sw = 7;
- ret = 0;
+
for (i = 0; i < 8; ++i) {
if (!(flags & ST)) {
- ret |= __get_user(ptr0[i^sw], addr + i);
- ret |= __get_user(ptr1[i^sw], addr + i + 8);
+ if (__get_user_or_set_dar(regs, ptr0[i^sw], addr + i))
+ return -EFAULT;
+ if (__get_user_or_set_dar(regs, ptr1[i^sw], addr + i + 8))
+ return -EFAULT;
} else {
- ret |= __put_user(ptr0[i^sw], addr + i);
- ret |= __put_user(ptr1[i^sw], addr + i + 8);
+ if (__put_user_or_set_dar(regs, ptr0[i^sw], addr + i))
+ return -EFAULT;
+ if (__put_user_or_set_dar(regs, ptr1[i^sw], addr + i + 8))
+ return -EFAULT;
}
}
- if (ret)
- return -EFAULT;
+
return 1; /* exception handled and fixed up */
}
#endif /* CONFIG_PPC64 */
@@ -688,9 +717,14 @@ static int emulate_vsx(unsigned char __u
for (j = 0; j < length; j += elsize) {
for (i = 0; i < elsize; ++i) {
if (flags & ST)
- ret |= __put_user(ptr[i^sw], addr + i);
+ ret = __put_user_or_set_dar(regs, ptr[i^sw],
+ addr + i);
else
- ret |= __get_user(ptr[i^sw], addr + i);
+ ret = __get_user_or_set_dar(regs, ptr[i^sw],
+ addr + i);
+
+ if (ret)
+ return ret;
}
ptr += elsize;
#ifdef __LITTLE_ENDIAN__
@@ -740,7 +774,7 @@ int fix_alignment(struct pt_regs *regs)
unsigned int dsisr;
unsigned char __user *addr;
unsigned long p, swiz;
- int ret, i;
+ int i;
union data {
u64 ll;
double dd;
@@ -923,7 +957,7 @@ int fix_alignment(struct pt_regs *regs)
if (flags & F) {
/* Special case for 16-byte FP loads and stores */
PPC_WARN_ALIGNMENT(fp_pair, regs);
- return emulate_fp_pair(addr, reg, flags);
+ return emulate_fp_pair(regs, addr, reg, flags);
} else {
#ifdef CONFIG_PPC64
/* Special case for 16-byte loads and stores */
@@ -953,15 +987,12 @@ int fix_alignment(struct pt_regs *regs)
}
data.ll = 0;
- ret = 0;
p = (unsigned long)addr;
for (i = 0; i < nb; i++)
- ret |= __get_user_inatomic(data.v[start + i],
- SWIZ_PTR(p++));
-
- if (unlikely(ret))
- return -EFAULT;
+ if (__get_user_or_set_dar(regs, data.v[start + i],
+ SWIZ_PTR(p++)))
+ return -EFAULT;
} else if (flags & F) {
data.ll = current->thread.TS_FPR(reg);
@@ -1031,15 +1062,13 @@ int fix_alignment(struct pt_regs *regs)
break;
}
- ret = 0;
p = (unsigned long)addr;
for (i = 0; i < nb; i++)
- ret |= __put_user_inatomic(data.v[start + i],
- SWIZ_PTR(p++));
+ if (__put_user_or_set_dar(regs, data.v[start + i],
+ SWIZ_PTR(p++)))
+ return -EFAULT;
- if (unlikely(ret))
- return -EFAULT;
} else if (flags & F)
current->thread.TS_FPR(reg) = data.ll;
else
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bart Van Assche <[email protected]>
commit 4ddd56b003f251091a67c15ae3fe4a5c5c5e390a upstream.
Calling blk_start_queue() from interrupt context with the queue
lock held and without disabling IRQs, as the skd driver does, is
safe. This patch avoids that loading the skd driver triggers the
following warning:
WARNING: CPU: 11 PID: 1348 at block/blk-core.c:283 blk_start_queue+0x84/0xa0
RIP: 0010:blk_start_queue+0x84/0xa0
Call Trace:
skd_unquiesce_dev+0x12a/0x1d0 [skd]
skd_complete_internal+0x1e7/0x5a0 [skd]
skd_complete_other+0xc2/0xd0 [skd]
skd_isr_completion_posted.isra.30+0x2a5/0x470 [skd]
skd_isr+0x14f/0x180 [skd]
irq_forced_thread_fn+0x2a/0x70
irq_thread+0x144/0x1a0
kthread+0x125/0x140
ret_from_fork+0x2a/0x40
Fixes: commit a038e2536472 ("[PATCH] blk_start_queue() must be called with irq disabled - add warning")
Signed-off-by: Bart Van Assche <[email protected]>
Cc: Paolo 'Blaisorblade' Giarrusso <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Johannes Thumshirn <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/blk-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -194,7 +194,7 @@ EXPORT_SYMBOL(blk_delay_queue);
**/
void blk_start_queue(struct request_queue *q)
{
- WARN_ON(!irqs_disabled());
+ WARN_ON(!in_interrupt() && !irqs_disabled());
queue_flag_clear(QUEUE_FLAG_STOPPED, q);
__blk_run_queue(q);
On 09/24/2017 01:27 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.72 release.
> There are 42 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Tue Sep 26 20:26:30 UTC 2017.
> Anything received after that time might be too late.
>
Build results:
total: 136 pass: 134 fail: 2
Failed builds:
s390:defconfig
s390:allmodconfig
Qemu test results:
total: 112 pass: 111 fail: 1
Failed tests:
s390:defconfig
Build failure:
Building s390:defconfig ... failed
------------
Error log:
drivers/s390/scsi/zfcp_scsi.c: In function 'zfcp_task_mgmt_function':
drivers/s390/scsi/zfcp_scsi.c:249:4: error: too many arguments to function 'zfcp_dbf_scsi_devreset'
drivers/s390/scsi/zfcp_dbf.h:376:6: note: declared here
drivers/s390/scsi/zfcp_scsi.c:260:3: error: too many arguments to function 'zfcp_dbf_scsi_devreset'
drivers/s390/scsi/zfcp_dbf.h:376:6: note: declared here
make[2]: *** [drivers/s390/scsi/zfcp_scsi.o] Error 1
Details are available at http://kerneltests.org/builders.
Guenter
On Sun, Sep 24, 2017 at 06:02:56PM -0700, Guenter Roeck wrote:
> On 09/24/2017 01:27 PM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 3.18.72 release.
> > There are 42 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Tue Sep 26 20:26:30 UTC 2017.
> > Anything received after that time might be too late.
> >
>
> Build results:
> total: 136 pass: 134 fail: 2
> Failed builds:
> s390:defconfig
> s390:allmodconfig
> Qemu test results:
> total: 112 pass: 111 fail: 1
> Failed tests:
> s390:defconfig
>
> Build failure:
>
> Building s390:defconfig ... failed
> ------------
> Error log:
> drivers/s390/scsi/zfcp_scsi.c: In function 'zfcp_task_mgmt_function':
> drivers/s390/scsi/zfcp_scsi.c:249:4: error: too many arguments to function 'zfcp_dbf_scsi_devreset'
> drivers/s390/scsi/zfcp_dbf.h:376:6: note: declared here
> drivers/s390/scsi/zfcp_scsi.c:260:3: error: too many arguments to function 'zfcp_dbf_scsi_devreset'
> drivers/s390/scsi/zfcp_dbf.h:376:6: note: declared here
> make[2]: *** [drivers/s390/scsi/zfcp_scsi.o] Error 1
Ah, thanks for letting me know about this, I have fixed it up now (hopefully.)
greg k-h
On 09/24/2017 11:29 PM, Greg Kroah-Hartman wrote:
> On Sun, Sep 24, 2017 at 06:02:56PM -0700, Guenter Roeck wrote:
>> On 09/24/2017 01:27 PM, Greg Kroah-Hartman wrote:
>>> This is the start of the stable review cycle for the 3.18.72 release.
>>> There are 42 patches in this series, all will be posted as a response
>>> to this one. If anyone has any issues with these being applied, please
>>> let me know.
>>>
>>> Responses should be made by Tue Sep 26 20:26:30 UTC 2017.
>>> Anything received after that time might be too late.
>>>
>>
>> Build results:
>> total: 136 pass: 134 fail: 2
>> Failed builds:
>> s390:defconfig
>> s390:allmodconfig
>> Qemu test results:
>> total: 112 pass: 111 fail: 1
>> Failed tests:
>> s390:defconfig
>>
>> Build failure:
>>
>> Building s390:defconfig ... failed
>> ------------
>> Error log:
>> drivers/s390/scsi/zfcp_scsi.c: In function 'zfcp_task_mgmt_function':
>> drivers/s390/scsi/zfcp_scsi.c:249:4: error: too many arguments to function 'zfcp_dbf_scsi_devreset'
>> drivers/s390/scsi/zfcp_dbf.h:376:6: note: declared here
>> drivers/s390/scsi/zfcp_scsi.c:260:3: error: too many arguments to function 'zfcp_dbf_scsi_devreset'
>> drivers/s390/scsi/zfcp_dbf.h:376:6: note: declared here
>> make[2]: *** [drivers/s390/scsi/zfcp_scsi.o] Error 1
>
> Ah, thanks for letting me know about this, I have fixed it up now (hopefully.)
>
The latest build (v3.18.71-42-ge78c938) passed all my tests.
Guenter
On Mon, Sep 25, 2017 at 04:05:41AM -0700, Guenter Roeck wrote:
> On 09/24/2017 11:29 PM, Greg Kroah-Hartman wrote:
> > On Sun, Sep 24, 2017 at 06:02:56PM -0700, Guenter Roeck wrote:
> > > On 09/24/2017 01:27 PM, Greg Kroah-Hartman wrote:
> > > > This is the start of the stable review cycle for the 3.18.72 release.
> > > > There are 42 patches in this series, all will be posted as a response
> > > > to this one. If anyone has any issues with these being applied, please
> > > > let me know.
> > > >
> > > > Responses should be made by Tue Sep 26 20:26:30 UTC 2017.
> > > > Anything received after that time might be too late.
> > > >
> > >
> > > Build results:
> > > total: 136 pass: 134 fail: 2
> > > Failed builds:
> > > s390:defconfig
> > > s390:allmodconfig
> > > Qemu test results:
> > > total: 112 pass: 111 fail: 1
> > > Failed tests:
> > > s390:defconfig
> > >
> > > Build failure:
> > >
> > > Building s390:defconfig ... failed
> > > ------------
> > > Error log:
> > > drivers/s390/scsi/zfcp_scsi.c: In function 'zfcp_task_mgmt_function':
> > > drivers/s390/scsi/zfcp_scsi.c:249:4: error: too many arguments to function 'zfcp_dbf_scsi_devreset'
> > > drivers/s390/scsi/zfcp_dbf.h:376:6: note: declared here
> > > drivers/s390/scsi/zfcp_scsi.c:260:3: error: too many arguments to function 'zfcp_dbf_scsi_devreset'
> > > drivers/s390/scsi/zfcp_dbf.h:376:6: note: declared here
> > > make[2]: *** [drivers/s390/scsi/zfcp_scsi.o] Error 1
> >
> > Ah, thanks for letting me know about this, I have fixed it up now (hopefully.)
> >
>
> The latest build (v3.18.71-42-ge78c938) passed all my tests.
Wonderful, thanks for letting me know.
greg k-h
On 09/24/2017 02:27 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.72 release.
> There are 42 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Tue Sep 26 20:26:30 UTC 2017.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.72-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah