Add support for the Solomon Goldentek Display Model: GKTW70SDAD1SD
to panel-simple.
The panel spec from Variscite can be found at:
https://www.variscite.com/wp-content/uploads/2017/12/VLCD-CAP-GLD-RGB.pdf
Signed-off-by: Oliver Graute <[email protected]>
---
panel-timing {
clock-frequency = <35000000>;
hactive = <800>;
vactive = <480>;
hback-porch = <39>;
hfront-porch = <39>;
vback-porch = <29>;
vfront-porch = <13>;
hsync-len = <48>;
vsync-len = <3>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
drivers/gpu/drm/panel/panel-simple.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index c1374be..c2f20ac 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -3139,6 +3139,29 @@ static const struct panel_desc satoz_sat050at40h12r2 = {
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
+static const struct display_timing sgd_gktw70sdad1sd_timing = {
+ .pixelclock = {35000000, 35000000, 35000000},
+ .hactive = { 800, 800, 800},
+ .hfront_porch = {39, 39, 39},
+ .hback_porch = {39, 39, 39},
+ .hsync_len = {48, 48, 48},
+ .vactive = {480, 480, 480},
+ .vfront_porch = {13, 13, 13},
+ .vback_porch = {29, 29, 29},
+ .vsync_len = {3, 3, 3},
+};
+
+static const struct panel_desc sgd_gktw70sdad1sd = {
+ .timings = &sgd_gktw70sdad1sd_timing,
+ .num_timings = 1,
+ .bpc = 8,
+ .size = {
+ .width = 153,
+ .height = 86,
+ },
+ .connector_type = DRM_MODE_CONNECTOR_DPI,
+};
+
static const struct drm_display_mode sharp_ld_d5116z01b_mode = {
.clock = 168480,
.hdisplay = 1920,
@@ -3999,6 +4022,9 @@ static const struct of_device_id platform_of_match[] = {
.compatible = "satoz,sat050at40h12r2",
.data = &satoz_sat050at40h12r2,
}, {
+ .compatible = "sgd,gktw70sdad1sd",
+ .data = &sgd_gktw70sdad1sd,
+ }, {
.compatible = "sharp,ld-d5116z01b",
.data = &sharp_ld_d5116z01b,
}, {
--
2.7.4
On 19/12/20, Oliver Graute wrote:
> Add support for the Solomon Goldentek Display Model: GKTW70SDAD1SD
> to panel-simple.
>
> The panel spec from Variscite can be found at:
> https://www.variscite.com/wp-content/uploads/2017/12/VLCD-CAP-GLD-RGB.pdf
some clue what bus_format and bus_flags I have to use?
[ 42.505156] panel-simple panel-lcd: Specify missing bus_flags
[ 42.511090] panel-simple panel-lcd: Specify missing bus_format
[ 42.615131] mxsfb 21c8000.lcdif: Cannot connect bridge: -517
Best Regards,
Oliver
Hi Oliver,
On Fri, Jan 8, 2021 at 7:24 PM Oliver Graute <[email protected]> wrote:
>
> On 19/12/20, Oliver Graute wrote:
> > Add support for the Solomon Goldentek Display Model: GKTW70SDAD1SD
> > to panel-simple.
> >
> > The panel spec from Variscite can be found at:
> > https://www.variscite.com/wp-content/uploads/2017/12/VLCD-CAP-GLD-RGB.pdf
>
> some clue what bus_format and bus_flags I have to use?
>
> [ 42.505156] panel-simple panel-lcd: Specify missing bus_flags
> [ 42.511090] panel-simple panel-lcd: Specify missing bus_format
> [ 42.615131] mxsfb 21c8000.lcdif: Cannot connect bridge: -517
Does this patch work?
https://pastebin.com/raw/diTMVsh8
On 09/01/21, Fabio Estevam wrote:
> Hi Oliver,
>
> On Fri, Jan 8, 2021 at 7:24 PM Oliver Graute <[email protected]> wrote:
> >
> > On 19/12/20, Oliver Graute wrote:
> > > Add support for the Solomon Goldentek Display Model: GKTW70SDAD1SD
> > > to panel-simple.
> > >
> > > The panel spec from Variscite can be found at:
> > > https://www.variscite.com/wp-content/uploads/2017/12/VLCD-CAP-GLD-RGB.pdf
> >
> > some clue what bus_format and bus_flags I have to use?
> >
> > [ 42.505156] panel-simple panel-lcd: Specify missing bus_flags
> > [ 42.511090] panel-simple panel-lcd: Specify missing bus_format
> > [ 42.615131] mxsfb 21c8000.lcdif: Cannot connect bridge: -517
>
> Does this patch work?
> https://pastebin.com/raw/diTMVsh8
the first two errors are gone. But I still get this:
[ 42.387107] mxsfb 21c8000.lcdif: Cannot connect bridge: -517
The panel is still off perhaps I miss something else.
Best Regards,
Oliver
Hi Oliver,
On Sun, Jan 10, 2021 at 12:35 PM Oliver Graute <[email protected]> wrote:
> the first two errors are gone. But I still get this:
>
> [ 42.387107] mxsfb 21c8000.lcdif: Cannot connect bridge: -517
>
> The panel is still off perhaps I miss something else.
Some suggestions:
- Take a look at arch/arm/boot/dts/imx6ul-14x14-evk.dtsi as a
reference as it has display functional
- Use imx_v6_v7_defconfig to make sure all the required drivers are selected
- If it still does not work, share the dts and schematics
On 10/01/21, Fabio Estevam wrote:
> Hi Oliver,
>
> On Sun, Jan 10, 2021 at 12:35 PM Oliver Graute <[email protected]> wrote:
>
> > the first two errors are gone. But I still get this:
> >
> > [ 42.387107] mxsfb 21c8000.lcdif: Cannot connect bridge: -517
> >
> > The panel is still off perhaps I miss something else.
>
> Some suggestions:
>
> - Take a look at arch/arm/boot/dts/imx6ul-14x14-evk.dtsi as a
> reference as it has display functional
> - Use imx_v6_v7_defconfig to make sure all the required drivers are selected
ok I checked imx6ul-14x14-evk.dtsi and use imx_v6_v7_defconfig
> - If it still does not work, share the dts and schematics
here the schematics and my dts. The board is using a LVDS connector for
the display.
https://www.variscite.de/wp-content/uploads/2017/12/VAR-6ULCustomboard-Schematics.pdf
https://lore.kernel.org/linux-arm-kernel/[email protected]/
Thx for your help,
Best Regards,
Oliver
On Sun, Jan 10, 2021 at 5:09 PM Oliver Graute <[email protected]> wrote:
> here the schematics and my dts. The board is using a LVDS connector for
> the display.
The schematics shows the GKTW70SDAD1SD panel in the J4 connector, not
the LVDS J7 connector.
> https://www.variscite.de/wp-content/uploads/2017/12/VAR-6ULCustomboard-Schematics.pdf
> https://lore.kernel.org/linux-arm-kernel/[email protected]/
As I mentioned earlier you should remove the display timings from the
dts when using the compatible string for the panel.
power-supply = <®_touch_3v3> is not correct, as the reg_touch_3v3
does not power the LCD.
Another hint is to use the PLL5_VIDEO as the clock source for the
lcdif controller as done in the imx6ul evk dtsi.
It would also help if you could share the complete boot log.
Hi,
On 10/01/2021 21:06, Oliver Graute wrote:
> On 10/01/21, Fabio Estevam wrote:
>> Hi Oliver,
>>
>> On Sun, Jan 10, 2021 at 12:35 PM Oliver Graute <[email protected]> wrote:
>>
>>> the first two errors are gone. But I still get this:
>>>
>>> [ 42.387107] mxsfb 21c8000.lcdif: Cannot connect bridge: -517
>>>
>>> The panel is still off perhaps I miss something else.
>>
>> Some suggestions:
>>
>> - Take a look at arch/arm/boot/dts/imx6ul-14x14-evk.dtsi as a
>> reference as it has display functional
>> - Use imx_v6_v7_defconfig to make sure all the required drivers are selected
>
> ok I checked imx6ul-14x14-evk.dtsi and use imx_v6_v7_defconfig
>
>> - If it still does not work, share the dts and schematics
>
> here the schematics and my dts. The board is using a LVDS connector for
> the display.
>
> https://www.variscite.de/wp-content/uploads/2017/12/VAR-6ULCustomboard-Schematics.pdf
> https://lore.kernel.org/linux-arm-kernel/[email protected]/
The DT6CustomBoard uses almost the same screen (sgd,gktw70sdae4se), it's supported and tested in kernelci, you can find the dt in arch/arm/boot/dts/imx6q-var-dt6customboard.dts
Neil
>
> Thx for your help,
>
> Best Regards,
>
> Oliver
> _______________________________________________
> dri-devel mailing list
> [email protected]
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
On 10/01/21, Fabio Estevam wrote:
> On Sun, Jan 10, 2021 at 5:09 PM Oliver Graute <[email protected]> wrote:
>
> > here the schematics and my dts. The board is using a LVDS connector for
> > the display.
>
> The schematics shows the GKTW70SDAD1SD panel in the J4 connector, not
> the LVDS J7 connector.
yes you are right. But how to I map this fact correctly in my dts?
> > https://www.variscite.de/wp-content/uploads/2017/12/VAR-6ULCustomboard-Schematics.pdf
> > https://lore.kernel.org/linux-arm-kernel/[email protected]/
>
> As I mentioned earlier you should remove the display timings from the
> dts when using the compatible string for the panel.
I got this and removed the display timings.
>
> power-supply = <®_touch_3v3> is not correct, as the reg_touch_3v3
> does not power the LCD.
yes, but how is the LCD correctly powered then?
>
> Another hint is to use the PLL5_VIDEO as the clock source for the
> lcdif controller as done in the imx6ul evk dtsi.
I already figured it out and tried it. But because of the faults above
it didn't make any difference.
>
> It would also help if you could share the complete boot log.
here is the boot log
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.10.0-test-00006-gc24ef7716d4b (oliver@ripley) (arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609, GNU ld (GNU Binutils for Ubuntu) 2.26.1) #1 SMP Sat Jan 16 13:28:37 CET 2021
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Variscite i.MX6 UltraLite Carrier-board
[ 0.000000] earlycon: ec_imx6q0 at MMIO 0x02020000 (options '')
[ 0.000000] printk: bootconsole [ec_imx6q0] enabled
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 64 MiB at 0x9c000000
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000080000000-0x000000009fffffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff]
[ 0.000000] percpu: Embedded 18 pages/cpu s51692 r0 d22036 u73728
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: console=ttymxc0,115200,115200 root=/dev/nfs ip=dhcp nfsroot=192.168.3.13:/volume1/nfs/rootfs/,v3,tcp rw earlycon
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 422620K/524288K available (16384K kernel code, 2090K rwdata, 4636K rodata, 1024K init, 6680K bss, 36132K reserved, 65536K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Running RCU self tests
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU lockdep checking is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] random: get_random_bytes called from start_kernel+0x350/0x570 with crng_init=0
[ 0.000000] Switching to timer-based delay loop, resolution 41ns
[ 0.000023] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[ 0.007847] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.021360] Console: colour dummy device 80x30
[ 0.023088] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.031763] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.034908] ... MAX_LOCK_DEPTH: 48
[ 0.039082] ... MAX_LOCKDEP_KEYS: 8192
[ 0.043532] ... CLASSHASH_SIZE: 4096
[ 0.047784] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.052216] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.056739] ... CHAINHASH_SIZE: 32768
[ 0.061095] memory used by lock dependency info: 4061 kB
[ 0.066484] memory used for stack traces: 2112 kB
[ 0.071350] per task-struct memory footprint: 1536 bytes
[ 0.076832] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.087133] pid_max: default: 32768 minimum: 301
[ 0.092643] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.099090] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.116687] CPU: Testing write buffer coherency: ok
[ 0.121675] CPU0: update cpu_capacity 1024
[ 0.123195] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.137375] Setting up static identity map for 0x80100000 - 0x80100078
[ 0.143540] rcu: Hierarchical SRCU implementation.
[ 0.151036] smp: Bringing up secondary CPUs ...
[ 0.153042] smp: Brought up 1 node, 1 CPU
[ 0.156812] SMP: Total of 1 processors activated (48.00 BogoMIPS).
[ 0.163139] CPU: All CPU(s) started in SVC mode.
[ 0.175033] devtmpfs: initialized
[ 0.261435] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.270309] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.277744] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[ 0.291069] pinctrl core: initialized pinctrl subsystem
[ 0.311238] NET: Registered protocol family 16
[ 0.403814] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.425861] thermal_sys: Registered thermal governor 'step_wise'
[ 0.426475] cpuidle: using governor menu
[ 1.392555] vdd3p0: supplied by regulator-dummy
[ 1.449176] cpu: supplied by regulator-dummy
[ 1.505982] vddsoc: supplied by regulator-dummy
[ 2.650693] random: fast init done
[ 2.847428] No ATAGs?
[ 2.848468] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 2.855189] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 2.879973] imx6ul-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver
[ 3.354311] mxs-dma 1804000.dma-apbh: initialized
[ 3.383607] vgaarb: loaded
[ 3.390804] SCSI subsystem initialized
[ 3.397679] usbcore: registered new interface driver usbfs
[ 3.401103] usbcore: registered new interface driver hub
[ 3.406748] usbcore: registered new device driver usb
[ 3.423207] i2c i2c-0: IMX I2C adapter registered
[ 3.442071] i2c i2c-1: IMX I2C adapter registered
[ 3.447952] mc: Linux media interface: v0.10
[ 3.449908] videodev: Linux video capture interface: v2.00
[ 3.456756] pps_core: LinuxPPS API ver. 1 registered
[ 3.460340] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 3.469854] PTP clock support registered
[ 3.479174] Advanced Linux Sound Architecture Driver Initialized.
[ 3.494302] Bluetooth: Core ver 2.22
[ 3.495526] NET: Registered protocol family 31
[ 3.499561] Bluetooth: HCI device and connection manager initialized
[ 3.506443] Bluetooth: HCI socket layer initialized
[ 3.510845] Bluetooth: L2CAP socket layer initialized
[ 3.516540] Bluetooth: SCO socket layer initialized
[ 3.529473] clocksource: Switched to clocksource mxc_timer1
[ 7.164127] VFS: Disk quotas dquot_6.6.0
[ 7.165818] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 7.287891] NET: Registered protocol family 2
[ 7.296268] tcp_listen_portaddr_hash hash table entries: 256 (order: 1, 11264 bytes, linear)
[ 7.302390] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 7.310128] TCP bind hash table entries: 4096 (order: 5, 163840 bytes, linear)
[ 7.318099] TCP: Hash tables configured (established 4096 bind 4096)
[ 7.325842] UDP hash table entries: 256 (order: 2, 24576 bytes, linear)
[ 7.330778] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes, linear)
[ 7.338423] NET: Registered protocol family 1
[ 7.350914] RPC: Registered named UNIX socket transport module.
[ 7.354304] RPC: Registered udp transport module.
[ 7.358969] RPC: Registered tcp transport module.
[ 7.363933] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 7.375508] PCI: CLS 0 bytes, default 64
[ 7.386725] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[ 7.411999] Initialise system trusted keyrings
[ 7.416009] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 7.507155] NFS: Registering the id_resolver key type
[ 7.510409] Key type id_resolver registered
[ 7.513667] Key type id_legacy registered
[ 7.518795] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 7.524853] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 7.532837] jffs2: version 2.2. (NAND) ? 2001-2006 Red Hat, Inc.
[ 7.544270] fuse: init (API version 7.32)
[ 7.755072] Key type asymmetric registered
[ 7.756777] Asymmetric key parser 'x509' registered
[ 7.762464] io scheduler mq-deadline registered
[ 7.765824] io scheduler kyber registered
[ 7.795980] pwm-backlight backlight: supply power not found, using dummy regulator
[ 7.804436] OF: /backlight: #pwm-cells = 3 found -1
[ 7.806563] of_pwm_get(): can't parse "pwms" property
[ 7.812026] pwm-backlight backlight: unable to request PWM
[ 7.822929] pwm-backlight: probe of backlight failed with error -22
[ 7.876831] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
[ 7.884231] imx-sdma 20ec000.sdma: Falling back to sysfs fallback for: imx/sdma/sdma-imx6q.bin
[ 7.916013] printk: console [ttymxc0] enabled
[ 7.916013] printk: console [ttymxc0] enabled
[ 7.922351] printk: bootconsole [ec_imx6q0] disabled
[ 7.922351] printk: bootconsole [ec_imx6q0] disabled
[ 7.952397] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 68, base_baud = 5000000) is a IMX
[ 7.970794] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 69, base_baud = 5000000) is a IMX
[ 8.033015] ------------[ cut here ]------------
[ 8.037826] WARNING: CPU: 0 PID: 1 at ../drivers/gpu/drm/panel/panel-simple.c:577 panel_simple_probe+0x5dc/0x6b8
[ 8.048370] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.0-test-00006-gc24ef7716d4b #1
[ 8.056554] Hardware name: Freescale i.MX6 Ultralite (Device Tree)
[ 8.062858] [<c011055c>] (unwind_backtrace) from [<c010b9fc>] (show_stack+0x10/0x14)
[ 8.070708] [<c010b9fc>] (show_stack) from [<c101851c>] (dump_stack+0xdc/0x104)
[ 8.078120] [<c101851c>] (dump_stack) from [<c0124778>] (__warn+0x100/0x114)
[ 8.085265] [<c0124778>] (__warn) from [<c0124830>] (warn_slowpath_fmt+0xa4/0xb4)
[ 8.092843] [<c0124830>] (warn_slowpath_fmt) from [<c0790904>] (panel_simple_probe+0x5dc/0x6b8)
[ 8.101639] [<c0790904>] (panel_simple_probe) from [<c07bc1e0>] (platform_drv_probe+0x6c/0xa4)
[ 8.110352] [<c07bc1e0>] (platform_drv_probe) from [<c07ba158>] (really_probe+0x200/0x3a8)
[ 8.118712] [<c07ba158>] (really_probe) from [<c07ba708>] (driver_probe_device+0x58/0xb4)
[ 8.126989] [<c07ba708>] (driver_probe_device) from [<c07ba90c>] (device_driver_attach+0x58/0x60)
[ 8.135949] [<c07ba90c>] (device_driver_attach) from [<c07ba970>] (__driver_attach+0x5c/0xd4)
[ 8.144567] [<c07ba970>] (__driver_attach) from [<c07b860c>] (bus_for_each_dev+0x64/0xb4)
[ 8.152843] [<c07b860c>] (bus_for_each_dev) from [<c07b8ed0>] (bus_add_driver+0x130/0x1d8)
[ 8.161201] [<c07b8ed0>] (bus_add_driver) from [<c07bb7a4>] (driver_register+0x78/0x110)
[ 8.169382] [<c07bb7a4>] (driver_register) from [<c164bfb4>] (panel_simple_init+0x10/0x34)
[ 8.177740] [<c164bfb4>] (panel_simple_init) from [<c1601148>] (do_one_initcall+0x154/0x390)
[ 8.186271] [<c1601148>] (do_one_initcall) from [<c160152c>] (kernel_init_freeable+0x154/0x1d4)
[ 8.195061] [<c160152c>] (kernel_init_freeable) from [<c1019e44>] (kernel_init+0x8/0x120)
[ 8.203334] [<c1019e44>] (kernel_init) from [<c0100134>] (ret_from_fork+0x14/0x20)
[ 8.210990] Exception stack(0xc40dbfb0 to 0xc40dbff8)
[ 8.216129] bfa0: 00000000 00000000 00000000 00000000
[ 8.224395] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 8.232654] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 8.239774] irq event stamp: 621541
[ 8.243390] hardirqs last enabled at (621549): [<c0194220>] console_unlock+0x4b8/0x61c
[ 8.251707] hardirqs last disabled at (621558): [<c0194204>] console_unlock+0x49c/0x61c
[ 8.260131] softirqs last enabled at (621576): [<c0101754>] __do_softirq+0x474/0x5c4
[ 8.268068] softirqs last disabled at (621567): [<c012d81c>] irq_exit+0x1a4/0x1e4
[ 8.275888] ---[ end trace e465f1043b41b1a4 ]---
[ 8.280787] ------------[ cut here ]------------
[ 8.285519] WARNING: CPU: 0 PID: 1 at ../drivers/gpu/drm/panel/panel-simple.c:580 panel_simple_probe+0x5c0/0x6b8
[ 8.295981] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 5.10.0-test-00006-gc24ef7716d4b #1
[ 8.305543] Hardware name: Freescale i.MX6 Ultralite (Device Tree)
[ 8.311831] [<c011055c>] (unwind_backtrace) from [<c010b9fc>] (show_stack+0x10/0x14)
[ 8.319679] [<c010b9fc>] (show_stack) from [<c101851c>] (dump_stack+0xdc/0x104)
[ 8.327086] [<c101851c>] (dump_stack) from [<c0124778>] (__warn+0x100/0x114)
[ 8.334227] [<c0124778>] (__warn) from [<c0124830>] (warn_slowpath_fmt+0xa4/0xb4)
[ 8.341805] [<c0124830>] (warn_slowpath_fmt) from [<c07908e8>] (panel_simple_probe+0x5c0/0x6b8)
[ 8.350599] [<c07908e8>] (panel_simple_probe) from [<c07bc1e0>] (platform_drv_probe+0x6c/0xa4)
[ 8.359307] [<c07bc1e0>] (platform_drv_probe) from [<c07ba158>] (really_probe+0x200/0x3a8)
[ 8.367669] [<c07ba158>] (really_probe) from [<c07ba708>] (driver_probe_device+0x58/0xb4)
[ 8.375936] [<c07ba708>] (driver_probe_device) from [<c07ba90c>] (device_driver_attach+0x58/0x60)
[ 8.384899] [<c07ba90c>] (device_driver_attach) from [<c07ba970>] (__driver_attach+0x5c/0xd4)
[ 8.393517] [<c07ba970>] (__driver_attach) from [<c07b860c>] (bus_for_each_dev+0x64/0xb4)
[ 8.401787] [<c07b860c>] (bus_for_each_dev) from [<c07b8ed0>] (bus_add_driver+0x130/0x1d8)
[ 8.410142] [<c07b8ed0>] (bus_add_driver) from [<c07bb7a4>] (driver_register+0x78/0x110)
[ 8.418323] [<c07bb7a4>] (driver_register) from [<c164bfb4>] (panel_simple_init+0x10/0x34)
[ 8.426678] [<c164bfb4>] (panel_simple_init) from [<c1601148>] (do_one_initcall+0x154/0x390)
[ 8.435207] [<c1601148>] (do_one_initcall) from [<c160152c>] (kernel_init_freeable+0x154/0x1d4)
[ 8.443996] [<c160152c>] (kernel_init_freeable) from [<c1019e44>] (kernel_init+0x8/0x120)
[ 8.452265] [<c1019e44>] (kernel_init) from [<c0100134>] (ret_from_fork+0x14/0x20)
[ 8.459917] Exception stack(0xc40dbfb0 to 0xc40dbff8)
[ 8.465051] bfa0: 00000000 00000000 00000000 00000000
[ 8.473318] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 8.481577] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 8.488470] irq event stamp: 621633
[ 8.492258] hardirqs last enabled at (621643): [<c0194220>] console_unlock+0x4b8/0x61c
[ 8.500548] hardirqs last disabled at (621652): [<c0194204>] console_unlock+0x49c/0x61c
[ 8.508658] softirqs last enabled at (621576): [<c0101754>] __do_softirq+0x474/0x5c4
[ 8.516772] softirqs last disabled at (621567): [<c012d81c>] irq_exit+0x1a4/0x1e4
[ 8.524521] ---[ end trace e465f1043b41b1a5 ]---
[ 8.555193] mxsfb 21c8000.lcdif: Cannot connect bridge: -517
[ 8.706637] brd: module loaded
[ 8.825662] loop: module loaded
[ 8.846104] imx6ul-pinctrl 20e0000.pinctrl: pin MX6UL_PAD_NAND_CE0_B already requested by regulator-gpio; cannot claim for 1806000.nand-controller
[ 8.859641] imx6ul-pinctrl 20e0000.pinctrl: pin-107 (1806000.nand-controller) status -22
[ 8.867851] imx6ul-pinctrl 20e0000.pinctrl: could not request pin 107 (MX6UL_PAD_NAND_CE0_B) from group gpminandgrp on device 20e0000.pinctrl
[ 8.880930] gpmi-nand 1806000.nand-controller: Error applying setting, reverse things back
[ 8.889726] gpmi-nand: probe of 1806000.nand-controller failed with error -22
[ 8.917681] libphy: Fixed MDIO Bus: probed
[ 8.928368] CAN device driver interface
[ 8.962525] pps pps0: new PPS source ptp0
[ 9.026335] libphy: fec_enet_mii_bus: probed
[ 9.036164] fec 20b4000.ethernet eth0: registered PHC device 0
[ 9.051151] pps pps1: new PPS source ptp1
[ 9.068656] libphy: fec_enet_mii_bus: probed
[ 9.089867] fec 2188000.ethernet eth1: registered PHC device 1
[ 9.109051] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 9.117210] usbcore: registered new interface driver pegasus
[ 9.123968] usbcore: registered new interface driver rtl8150
[ 9.130333] usbcore: registered new interface driver r8152
[ 9.136273] usbcore: registered new interface driver lan78xx
[ 9.142645] usbcore: registered new interface driver asix
[ 9.148502] usbcore: registered new interface driver ax88179_178a
[ 9.155443] usbcore: registered new interface driver cdc_ether
[ 9.162529] usbcore: registered new interface driver cdc_eem
[ 9.168667] usbcore: registered new interface driver smsc95xx
[ 9.175103] usbcore: registered new interface driver net1080
[ 9.181434] usbcore: registered new interface driver cdc_subset
[ 9.187846] usbcore: registered new interface driver zaurus
[ 9.194079] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 9.202160] usbcore: registered new interface driver cdc_ncm
[ 9.207918] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 9.214727] ehci-pci: EHCI PCI platform driver
[ 9.220259] ehci-mxc: Freescale On-Chip EHCI Host driver
[ 9.228695] usbcore: registered new interface driver cdc_acm
[ 9.234708] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 9.243445] usbcore: registered new interface driver usb-storage
[ 9.250559] usbcore: registered new interface driver usbserial_generic
[ 9.258331] usbserial: USB Serial support registered for generic
[ 9.265294] usbcore: registered new interface driver ftdi_sio
[ 9.271636] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 9.279599] usbcore: registered new interface driver option
[ 9.285539] usbserial: USB Serial support registered for GSM modem (1-port)
[ 9.293196] usbcore: registered new interface driver usbtest
[ 9.299564] usbcore: registered new interface driver usb_ehset_test
[ 9.325952] udc-core: couldn't find an available UDC - added [zero] to list of pending drivers
[ 9.335587] udc-core: couldn't find an available UDC - added [g_audio] to list of pending drivers
[ 9.344884] udc-core: couldn't find an available UDC - added [g_ether] to list of pending drivers
[ 9.354088] gadgetfs: USB Gadget filesystem, version 24 Aug 2004
[ 9.361116] file system registered
[ 9.364948] udc-core: couldn't find an available UDC - added [g_mass_storage] to list of pending drivers
[ 9.374795] udc-core: couldn't find an available UDC - added [g_serial] to list of pending drivers
[ 9.384064] udc-core: couldn't find an available UDC - added [g_ncm] to list of pending drivers
[ 9.416809] edt_ft5x06 1-0038: supply vcc not found, using dummy regulator
[ 9.495351] rtc-ds1307 1-0068: registered as rtc0
[ 9.505051] input: generic ft5x06 (79) as /devices/platform/soc/2100000.bus/21a4000.i2c/i2c-1/1-0038/input/input0
[ 9.521207] rtc-ds1307 1-0068: setting system clock to 2021-01-16T12:30:39 UTC (1610800239)
[ 9.551561] i2c /dev entries driver
[ 9.589585] usbcore: registered new interface driver uvcvideo
[ 9.595449] USB Video Class driver (1.1.1)
[ 9.599834] gspca_main: v2.14.0 registered
[ 9.635967] Bluetooth: HCI UART driver ver 2.3
[ 9.640803] Bluetooth: HCI UART protocol H4 registered
[ 9.646340] Bluetooth: HCI UART protocol LL registered
[ 9.662712] sdhci: Secure Digital Host Controller Interface driver
[ 9.669009] sdhci: Copyright(c) Pierre Ossman
[ 9.673868] sdhci-pltfm: SDHCI platform and OF driver helper
[ 9.722618] caam 2140000.crypto: Entropy delay = 3200
[ 9.788611] caam 2140000.crypto: Instantiated RNG4 SH0
[ 9.849356] caam 2140000.crypto: Instantiated RNG4 SH1
[ 9.855265] caam 2140000.crypto: device ID = 0x0a16030000000000 (Era 8)
[ 9.862294] caam 2140000.crypto: job rings = 3, qi = 0
[ 9.903916] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA
[ 9.967220] mmc0: host does not support reading read-only switch, assuming write-enable
[ 9.991438] mmc0: new high speed SDHC card at address aaaa
[ 10.023447] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[ 10.083463] caam algorithms registered in /proc/crypto
[ 10.132831] caam 2140000.crypto: caam pkc algorithms registered in /proc/crypto
[ 10.141949] caam 2140000.crypto: registering rng-caam
[ 10.168853] usbcore: registered new interface driver usbhid
[ 10.175089] usbhid: USB HID core driver
[ 10.237153] usbcore: registered new interface driver snd-usb-audio
[ 10.260575] asoc-simple-card: probe of sound failed with error -22
[ 10.316426] NET: Registered protocol family 10
[ 10.332689] random: crng init done
[ 10.341742] Segment Routing with IPv6
[ 10.345950] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 10.360866] NET: Registered protocol family 17
[ 10.365577] can: controller area network core
[ 10.371385] NET: Registered protocol family 29
[ 10.375981] can: raw protocol
[ 10.379843] can: broadcast manager protocol
[ 10.384472] can: netlink gateway - max_hops=1
[ 10.390383] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.396279] Bluetooth: BNEP socket layer initialized
[ 10.402164] Key type dns_resolver registered
[ 10.445667] Registering SWP/SWPB emulation handler
[ 10.452270] Loading compiled-in X.509 certificates
[ 10.812158] ------------[ cut here ]------------
[ 10.817337] WARNING: CPU: 0 PID: 58 at ../drivers/gpu/drm/panel/panel-simple.c:577 panel_simple_probe+0x5dc/0x6b8
[ 10.827903] CPU: 0 PID: 58 Comm: kworker/0:2 Tainted: G W 5.10.0-test-00006-gc24ef7716d4b #1
[ 10.837712] Hardware name: Freescale i.MX6 Ultralite (Device Tree)
[ 10.843970] Workqueue: events deferred_probe_work_func
[ 10.849237] [<c011055c>] (unwind_backtrace) from [<c010b9fc>] (show_stack+0x10/0x14)
[ 10.857062] [<c010b9fc>] (show_stack) from [<c101851c>] (dump_stack+0xdc/0x104)
[ 10.864448] [<c101851c>] (dump_stack) from [<c0124778>] (__warn+0x100/0x114)
[ 10.871568] [<c0124778>] (__warn) from [<c0124830>] (warn_slowpath_fmt+0xa4/0xb4)
[ 10.879126] [<c0124830>] (warn_slowpath_fmt) from [<c0790904>] (panel_simple_probe+0x5dc/0x6b8)
[ 10.887895] [<c0790904>] (panel_simple_probe) from [<c07bc1e0>] (platform_drv_probe+0x6c/0xa4)
[ 10.896582] [<c07bc1e0>] (platform_drv_probe) from [<c07ba158>] (really_probe+0x200/0x3a8)
[ 10.904922] [<c07ba158>] (really_probe) from [<c07ba708>] (driver_probe_device+0x58/0xb4)
[ 10.913175] [<c07ba708>] (driver_probe_device) from [<c07b8ac4>] (bus_for_each_drv+0x70/0xb8)
[ 10.921774] [<c07b8ac4>] (bus_for_each_drv) from [<c07ba500>] (__device_attach+0xdc/0x150)
[ 10.930110] [<c07ba500>] (__device_attach) from [<c07b8c9c>] (bus_probe_device+0x88/0x90)
[ 10.938357] [<c07b8c9c>] (bus_probe_device) from [<c07b98e0>] (deferred_probe_work_func+0x68/0x98)
[ 10.947392] [<c07b98e0>] (deferred_probe_work_func) from [<c0145b84>] (process_one_work+0x21c/0x7f8)
[ 10.956600] [<c0145b84>] (process_one_work) from [<c0146194>] (worker_thread+0x34/0x568)
[ 10.964762] [<c0146194>] (worker_thread) from [<c014d738>] (kthread+0x124/0x160)
[ 10.972231] [<c014d738>] (kthread) from [<c0100134>] (ret_from_fork+0x14/0x20)
[ 10.979512] Exception stack(0xc447bfb0 to 0xc447bff8)
[ 10.984629] bfa0: 00000000 00000000 00000000 00000000
[ 10.992875] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 11.001121] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 11.008062] irq event stamp: 3805
[ 11.011633] hardirqs last enabled at (3815): [<c0194220>] console_unlock+0x4b8/0x61c
[ 11.019694] hardirqs last disabled at (3824): [<c0194204>] console_unlock+0x49c/0x61c
[ 11.027616] softirqs last enabled at (3804): [<c0101754>] __do_softirq+0x474/0x5c4
[ 11.035508] softirqs last disabled at (3793): [<c012d81c>] irq_exit+0x1a4/0x1e4
[ 11.043042] ---[ end trace e465f1043b41b1a7 ]---
[ 11.047731] ------------[ cut here ]------------
[ 11.052585] WARNING: CPU: 0 PID: 58 at ../drivers/gpu/drm/panel/panel-simple.c:580 panel_simple_probe+0x5c0/0x6b8
[ 11.063070] CPU: 0 PID: 58 Comm: kworker/0:2 Tainted: G W 5.10.0-test-00006-gc24ef7716d4b #1
[ 11.072872] Hardware name: Freescale i.MX6 Ultralite (Device Tree)
[ 11.079129] Workqueue: events deferred_probe_work_func
[ 11.084389] [<c011055c>] (unwind_backtrace) from [<c010b9fc>] (show_stack+0x10/0x14)
[ 11.092212] [<c010b9fc>] (show_stack) from [<c101851c>] (dump_stack+0xdc/0x104)
[ 11.099596] [<c101851c>] (dump_stack) from [<c0124778>] (__warn+0x100/0x114)
[ 11.106716] [<c0124778>] (__warn) from [<c0124830>] (warn_slowpath_fmt+0xa4/0xb4)
[ 11.114268] [<c0124830>] (warn_slowpath_fmt) from [<c07908e8>] (panel_simple_probe+0x5c0/0x6b8)
[ 11.123040] [<c07908e8>] (panel_simple_probe) from [<c07bc1e0>] (platform_drv_probe+0x6c/0xa4)
[ 11.131724] [<c07bc1e0>] (platform_drv_probe) from [<c07ba158>] (really_probe+0x200/0x3a8)
[ 11.140059] [<c07ba158>] (really_probe) from [<c07ba708>] (driver_probe_device+0x58/0xb4)
[ 11.148310] [<c07ba708>] (driver_probe_device) from [<c07b8ac4>] (bus_for_each_drv+0x70/0xb8)
[ 11.156911] [<c07b8ac4>] (bus_for_each_drv) from [<c07ba500>] (__device_attach+0xdc/0x150)
[ 11.165248] [<c07ba500>] (__device_attach) from [<c07b8c9c>] (bus_probe_device+0x88/0x90)
[ 11.173500] [<c07b8c9c>] (bus_probe_device) from [<c07b98e0>] (deferred_probe_work_func+0x68/0x98)
[ 11.182534] [<c07b98e0>] (deferred_probe_work_func) from [<c0145b84>] (process_one_work+0x21c/0x7f8)
[ 11.191742] [<c0145b84>] (process_one_work) from [<c0146194>] (worker_thread+0x34/0x568)
[ 11.199905] [<c0146194>] (worker_thread) from [<c014d738>] (kthread+0x124/0x160)
[ 11.207368] [<c014d738>] (kthread) from [<c0100134>] (ret_from_fork+0x14/0x20)
[ 11.214650] Exception stack(0xc447bfb0 to 0xc447bff8)
[ 11.219765] bfa0: 00000000 00000000 00000000 00000000
[ 11.228007] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 11.236247] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 11.243904] irq event stamp: 3907
[ 11.247341] hardirqs last enabled at (3915): [<c0194220>] console_unlock+0x4b8/0x61c
[ 11.255474] hardirqs last disabled at (3924): [<c0194204>] console_unlock+0x49c/0x61c
[ 11.263560] softirqs last enabled at (3906): [<c0101754>] __do_softirq+0x474/0x5c4
[ 11.271460] softirqs last disabled at (3885): [<c012d81c>] irq_exit+0x1a4/0x1e4
[ 11.278844] ---[ end trace e465f1043b41b1a8 ]---
[ 11.302291] mxsfb 21c8000.lcdif: Cannot connect bridge: -517
[ 11.326811] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 11.334665] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
[ 11.374141] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[ 11.390686] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 11.400588] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.408402] usb usb1: Product: EHCI Host Controller
[ 11.413953] usb usb1: Manufacturer: Linux 5.10.0-test-00006-gc24ef7716d4b ehci_hcd
[ 11.422140] usb usb1: SerialNumber: ci_hdrc.0
[ 11.457684] hub 1-0:1.0: USB hub found
[ 11.464445] hub 1-0:1.0: 1 port detected
[ 11.528228] ci_hdrc ci_hdrc.1: EHCI Host Controller
[ 11.533665] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
[ 11.574798] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
[ 11.585841] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 11.596217] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.604190] usb usb2: Product: EHCI Host Controller
[ 11.609675] usb usb2: Manufacturer: Linux 5.10.0-test-00006-gc24ef7716d4b ehci_hcd
[ 11.617474] usb usb2: SerialNumber: ci_hdrc.1
[ 11.637873] hub 2-0:1.0: USB hub found
[ 11.643943] hub 2-0:1.0: 1 port detected
[ 11.692929] imx_thermal 20c8000.anatop:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C
[ 11.724794] ------------[ cut here ]------------
[ 11.729848] WARNING: CPU: 0 PID: 58 at ../drivers/gpu/drm/panel/panel-simple.c:577 panel_simple_probe+0x5dc/0x6b8
[ 11.740382] CPU: 0 PID: 58 Comm: kworker/0:2 Tainted: G W 5.10.0-test-00006-gc24ef7716d4b #1
[ 11.750191] Hardware name: Freescale i.MX6 Ultralite (Device Tree)
[ 11.756449] Workqueue: events deferred_probe_work_func
[ 11.761722] [<c011055c>] (unwind_backtrace) from [<c010b9fc>] (show_stack+0x10/0x14)
[ 11.769549] [<c010b9fc>] (show_stack) from [<c101851c>] (dump_stack+0xdc/0x104)
[ 11.776938] [<c101851c>] (dump_stack) from [<c0124778>] (__warn+0x100/0x114)
[ 11.784060] [<c0124778>] (__warn) from [<c0124830>] (warn_slowpath_fmt+0xa4/0xb4)
[ 11.791612] [<c0124830>] (warn_slowpath_fmt) from [<c0790904>] (panel_simple_probe+0x5dc/0x6b8)
[ 11.800384] [<c0790904>] (panel_simple_probe) from [<c07bc1e0>] (platform_drv_probe+0x6c/0xa4)
[ 11.809070] [<c07bc1e0>] (platform_drv_probe) from [<c07ba158>] (really_probe+0x200/0x3a8)
[ 11.817410] [<c07ba158>] (really_probe) from [<c07ba708>] (driver_probe_device+0x58/0xb4)
[ 11.825658] [<c07ba708>] (driver_probe_device) from [<c07b8ac4>] (bus_for_each_drv+0x70/0xb8)
[ 11.834256] [<c07b8ac4>] (bus_for_each_drv) from [<c07ba500>] (__device_attach+0xdc/0x150)
[ 11.842592] [<c07ba500>] (__device_attach) from [<c07b8c9c>] (bus_probe_device+0x88/0x90)
[ 11.850843] [<c07b8c9c>] (bus_probe_device) from [<c07b98e0>] (deferred_probe_work_func+0x68/0x98)
[ 11.859876] [<c07b98e0>] (deferred_probe_work_func) from [<c0145b84>] (process_one_work+0x21c/0x7f8)
[ 11.869085] [<c0145b84>] (process_one_work) from [<c0146194>] (worker_thread+0x34/0x568)
[ 11.877249] [<c0146194>] (worker_thread) from [<c014d738>] (kthread+0x124/0x160)
[ 11.884718] [<c014d738>] (kthread) from [<c0100134>] (ret_from_fork+0x14/0x20)
[ 11.892002] Exception stack(0xc447bfb0 to 0xc447bff8)
[ 11.897117] bfa0: 00000000 00000000 00000000 00000000
[ 11.905360] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 11.913602] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 11.920591] irq event stamp: 11963
[ 11.924100] hardirqs last enabled at (11971): [<c0194220>] console_unlock+0x4b8/0x61c
[ 11.932274] hardirqs last disabled at (11980): [<c0194204>] console_unlock+0x49c/0x61c
[ 11.940425] softirqs last enabled at (11962): [<c0101754>] __do_softirq+0x474/0x5c4
[ 11.948256] softirqs last disabled at (11953): [<c012d81c>] irq_exit+0x1a4/0x1e4
[ 11.955880] ---[ end trace e465f1043b41b1a9 ]---
[ 11.960703] ------------[ cut here ]------------
[ 11.965405] WARNING: CPU: 0 PID: 58 at ../drivers/gpu/drm/panel/panel-simple.c:580 panel_simple_probe+0x5c0/0x6b8
[ 11.975892] CPU: 0 PID: 58 Comm: kworker/0:2 Tainted: G W 5.10.0-test-00006-gc24ef7716d4b #1
[ 11.985693] Hardware name: Freescale i.MX6 Ultralite (Device Tree)
[ 11.991948] Workqueue: events deferred_probe_work_func
[ 11.997207] [<c011055c>] (unwind_backtrace) from [<c010b9fc>] (show_stack+0x10/0x14)
[ 12.005030] [<c010b9fc>] (show_stack) from [<c101851c>] (dump_stack+0xdc/0x104)
[ 12.012415] [<c101851c>] (dump_stack) from [<c0124778>] (__warn+0x100/0x114)
[ 12.019535] [<c0124778>] (__warn) from [<c0124830>] (warn_slowpath_fmt+0xa4/0xb4)
[ 12.027089] [<c0124830>] (warn_slowpath_fmt) from [<c07908e8>] (panel_simple_probe+0x5c0/0x6b8)
[ 12.035858] [<c07908e8>] (panel_simple_probe) from [<c07bc1e0>] (platform_drv_probe+0x6c/0xa4)
[ 12.044544] [<c07bc1e0>] (platform_drv_probe) from [<c07ba158>] (really_probe+0x200/0x3a8)
[ 12.052886] [<c07ba158>] (really_probe) from [<c07ba708>] (driver_probe_device+0x58/0xb4)
[ 12.061136] [<c07ba708>] (driver_probe_device) from [<c07b8ac4>] (bus_for_each_drv+0x70/0xb8)
[ 12.069732] [<c07b8ac4>] (bus_for_each_drv) from [<c07ba500>] (__device_attach+0xdc/0x150)
[ 12.078067] [<c07ba500>] (__device_attach) from [<c07b8c9c>] (bus_probe_device+0x88/0x90)
[ 12.086320] [<c07b8c9c>] (bus_probe_device) from [<c07b98e0>] (deferred_probe_work_func+0x68/0x98)
[ 12.095352] [<c07b98e0>] (deferred_probe_work_func) from [<c0145b84>] (process_one_work+0x21c/0x7f8)
[ 12.104557] [<c0145b84>] (process_one_work) from [<c0146194>] (worker_thread+0x34/0x568)
[ 12.112719] [<c0146194>] (worker_thread) from [<c014d738>] (kthread+0x124/0x160)
[ 12.120184] [<c014d738>] (kthread) from [<c0100134>] (ret_from_fork+0x14/0x20)
[ 12.127465] Exception stack(0xc447bfb0 to 0xc447bff8)
[ 12.132579] bfa0: 00000000 00000000 00000000 00000000
[ 12.140821] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 12.149061] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 12.155901] irq event stamp: 12041
[ 12.159533] hardirqs last enabled at (12051): [<c0194220>] console_unlock+0x4b8/0x61c
[ 12.167536] hardirqs last disabled at (12058): [<c0194204>] console_unlock+0x49c/0x61c
[ 12.175682] softirqs last enabled at (11962): [<c0101754>] __do_softirq+0x474/0x5c4
[ 12.183652] softirqs last disabled at (11953): [<c012d81c>] irq_exit+0x1a4/0x1e4
[ 12.191263] ---[ end trace e465f1043b41b1aa ]---
[ 12.215142] mxsfb 21c8000.lcdif: Cannot connect bridge: -517
[ 12.231222] ------------[ cut here ]------------
[ 12.235967] WARNING: CPU: 0 PID: 58 at ../drivers/gpu/drm/panel/panel-simple.c:577 panel_simple_probe+0x5dc/0x6b8
[ 12.246650] CPU: 0 PID: 58 Comm: kworker/0:2 Tainted: G W 5.10.0-test-00006-gc24ef7716d4b #1
[ 12.256462] Hardware name: Freescale i.MX6 Ultralite (Device Tree)
[ 12.262719] Workqueue: events deferred_probe_work_func
[ 12.267997] [<c011055c>] (unwind_backtrace) from [<c010b9fc>] (show_stack+0x10/0x14)
[ 12.275822] [<c010b9fc>] (show_stack) from [<c101851c>] (dump_stack+0xdc/0x104)
[ 12.283211] [<c101851c>] (dump_stack) from [<c0124778>] (__warn+0x100/0x114)
[ 12.290333] [<c0124778>] (__warn) from [<c0124830>] (warn_slowpath_fmt+0xa4/0xb4)
[ 12.297890] [<c0124830>] (warn_slowpath_fmt) from [<c0790904>] (panel_simple_probe+0x5dc/0x6b8)
[ 12.306663] [<c0790904>] (panel_simple_probe) from [<c07bc1e0>] (platform_drv_probe+0x6c/0xa4)
[ 12.315350] [<c07bc1e0>] (platform_drv_probe) from [<c07ba158>] (really_probe+0x200/0x3a8)
[ 12.323691] [<c07ba158>] (really_probe) from [<c07ba708>] (driver_probe_device+0x58/0xb4)
[ 12.331948] [<c07ba708>] (driver_probe_device) from [<c07b8ac4>] (bus_for_each_drv+0x70/0xb8)
[ 12.340549] [<c07b8ac4>] (bus_for_each_drv) from [<c07ba500>] (__device_attach+0xdc/0x150)
[ 12.348885] [<c07ba500>] (__device_attach) from [<c07b8c9c>] (bus_probe_device+0x88/0x90)
[ 12.357138] [<c07b8c9c>] (bus_probe_device) from [<c07b98e0>] (deferred_probe_work_func+0x68/0x98)
[ 12.366170] [<c07b98e0>] (deferred_probe_work_func) from [<c0145b84>] (process_one_work+0x21c/0x7f8)
[ 12.375381] [<c0145b84>] (process_one_work) from [<c01463c8>] (worker_thread+0x268/0x568)
[ 12.383629] [<c01463c8>] (worker_thread) from [<c014d738>] (kthread+0x124/0x160)
[ 12.391097] [<c014d738>] (kthread) from [<c0100134>] (ret_from_fork+0x14/0x20)
[ 12.398379] Exception stack(0xc447bfb0 to 0xc447bff8)
[ 12.403498] bfa0: 00000000 00000000 00000000 00000000
[ 12.411744] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 12.419984] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 12.427042] irq event stamp: 14841
[ 12.430698] hardirqs last enabled at (14851): [<c0194220>] console_unlock+0x4b8/0x61c
[ 12.438702] hardirqs last disabled at (14858): [<c0194204>] console_unlock+0x49c/0x61c
[ 12.446867] softirqs last enabled at (14840): [<c0101754>] __do_softirq+0x474/0x5c4
[ 12.454849] softirqs last disabled at (14825): [<c012d81c>] irq_exit+0x1a4/0x1e4
[ 12.462464] ---[ end trace e465f1043b41b1ab ]---
[ 12.467153] ------------[ cut here ]------------
[ 12.471998] WARNING: CPU: 0 PID: 58 at ../drivers/gpu/drm/panel/panel-simple.c:580 panel_simple_probe+0x5c0/0x6b8
[ 12.482490] CPU: 0 PID: 58 Comm: kworker/0:2 Tainted: G W 5.10.0-test-00006-gc24ef7716d4b #1
[ 12.492292] Hardware name: Freescale i.MX6 Ultralite (Device Tree)
[ 12.498546] Workqueue: events deferred_probe_work_func
[ 12.503809] [<c011055c>] (unwind_backtrace) from [<c010b9fc>] (show_stack+0x10/0x14)
[ 12.511633] [<c010b9fc>] (show_stack) from [<c101851c>] (dump_stack+0xdc/0x104)
[ 12.519017] [<c101851c>] (dump_stack) from [<c0124778>] (__warn+0x100/0x114)
[ 12.526138] [<c0124778>] (__warn) from [<c0124830>] (warn_slowpath_fmt+0xa4/0xb4)
[ 12.533693] [<c0124830>] (warn_slowpath_fmt) from [<c07908e8>] (panel_simple_probe+0x5c0/0x6b8)
[ 12.542462] [<c07908e8>] (panel_simple_probe) from [<c07bc1e0>] (platform_drv_probe+0x6c/0xa4)
[ 12.551146] [<c07bc1e0>] (platform_drv_probe) from [<c07ba158>] (really_probe+0x200/0x3a8)
[ 12.559481] [<c07ba158>] (really_probe) from [<c07ba708>] (driver_probe_device+0x58/0xb4)
[ 12.567730] [<c07ba708>] (driver_probe_device) from [<c07b8ac4>] (bus_for_each_drv+0x70/0xb8)
[ 12.576330] [<c07b8ac4>] (bus_for_each_drv) from [<c07ba500>] (__device_attach+0xdc/0x150)
[ 12.584666] [<c07ba500>] (__device_attach) from [<c07b8c9c>] (bus_probe_device+0x88/0x90)
[ 12.592914] [<c07b8c9c>] (bus_probe_device) from [<c07b98e0>] (deferred_probe_work_func+0x68/0x98)
[ 12.601948] [<c07b98e0>] (deferred_probe_work_func) from [<c0145b84>] (process_one_work+0x21c/0x7f8)
[ 12.611155] [<c0145b84>] (process_one_work) from [<c01463c8>] (worker_thread+0x268/0x568)
[ 12.619405] [<c01463c8>] (worker_thread) from [<c014d738>] (kthread+0x124/0x160)
[ 12.626872] [<c014d738>] (kthread) from [<c0100134>] (ret_from_fork+0x14/0x20)
[ 12.634153] Exception stack(0xc447bfb0 to 0xc447bff8)
[ 12.639268] bfa0: 00000000 00000000 00000000 00000000
[ 12.647509] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 12.655749] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 12.662714] irq event stamp: 14933
[ 12.666213] hardirqs last enabled at (14941): [<c0194220>] console_unlock+0x4b8/0x61c
[ 12.674380] hardirqs last disabled at (14950): [<c0194204>] console_unlock+0x49c/0x61c
[ 12.682539] softirqs last enabled at (14932): [<c0101754>] __do_softirq+0x474/0x5c4
[ 12.690504] softirqs last disabled at (14921): [<c012d81c>] irq_exit+0x1a4/0x1e4
[ 12.697971] ---[ end trace e465f1043b41b1ac ]---
[ 12.715359] mxsfb 21c8000.lcdif: Cannot connect bridge: -517
[ 12.733465] input: gpio-keys as /devices/platform/gpio-keys/input/input1
[ 12.752300] ------------[ cut here ]------------
[ 12.757039] WARNING: CPU: 0 PID: 58 at ../drivers/gpu/drm/panel/panel-simple.c:577 panel_simple_probe+0x5dc/0x6b8
[ 12.767865] CPU: 0 PID: 58 Comm: kworker/0:2 Tainted: G W 5.10.0-test-00006-gc24ef7716d4b #1
[ 12.777677] Hardware name: Freescale i.MX6 Ultralite (Device Tree)
[ 12.783938] Workqueue: events deferred_probe_work_func
[ 12.789215] [<c011055c>] (unwind_backtrace) from [<c010b9fc>] (show_stack+0x10/0x14)
[ 12.797045] [<c010b9fc>] (show_stack) from [<c101851c>] (dump_stack+0xdc/0x104)
[ 12.804434] [<c101851c>] (dump_stack) from [<c0124778>] (__warn+0x100/0x114)
[ 12.811558] [<c0124778>] (__warn) from [<c0124830>] (warn_slowpath_fmt+0xa4/0xb4)
[ 12.819115] [<c0124830>] (warn_slowpath_fmt) from [<c0790904>] (panel_simple_probe+0x5dc/0x6b8)
[ 12.827891] [<c0790904>] (panel_simple_probe) from [<c07bc1e0>] (platform_drv_probe+0x6c/0xa4)
[ 12.836578] [<c07bc1e0>] (platform_drv_probe) from [<c07ba158>] (really_probe+0x200/0x3a8)
[ 12.844916] [<c07ba158>] (really_probe) from [<c07ba708>] (driver_probe_device+0x58/0xb4)
[ 12.853168] [<c07ba708>] (driver_probe_device) from [<c07b8ac4>] (bus_for_each_drv+0x70/0xb8)
[ 12.861766] [<c07b8ac4>] (bus_for_each_drv) from [<c07ba500>] (__device_attach+0xdc/0x150)
[ 12.870104] [<c07ba500>] (__device_attach) from [<c07b8c9c>] (bus_probe_device+0x88/0x90)
[ 12.878353] [<c07b8c9c>] (bus_probe_device) from [<c07b98e0>] (deferred_probe_work_func+0x68/0x98)
[ 12.887385] [<c07b98e0>] (deferred_probe_work_func) from [<c0145b84>] (process_one_work+0x21c/0x7f8)
[ 12.896593] [<c0145b84>] (process_one_work) from [<c0146194>] (worker_thread+0x34/0x568)
[ 12.904757] [<c0146194>] (worker_thread) from [<c014d738>] (kthread+0x124/0x160)
[ 12.912225] [<c014d738>] (kthread) from [<c0100134>] (ret_from_fork+0x14/0x20)
[ 12.919509] Exception stack(0xc447bfb0 to 0xc447bff8)
[ 12.924624] bfa0: 00000000 00000000 00000000 00000000
[ 12.932871] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 12.941112] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 12.948065] irq event stamp: 17823
[ 12.951732] hardirqs last enabled at (17833): [<c0194220>] console_unlock+0x4b8/0x61c
[ 12.959887] hardirqs last disabled at (17842): [<c0194204>] console_unlock+0x49c/0x61c
[ 12.967890] softirqs last enabled at (17822): [<c0101754>] __do_softirq+0x474/0x5c4
[ 12.975868] softirqs last disabled at (17811): [<c012d81c>] irq_exit+0x1a4/0x1e4
[ 12.983491] ---[ end trace e465f1043b41b1ad ]---
[ 12.988186] ------------[ cut here ]------------
[ 12.993034] WARNING: CPU: 0 PID: 58 at ../drivers/gpu/drm/panel/panel-simple.c:580 panel_simple_probe+0x5c0/0x6b8
[ 13.003529] CPU: 0 PID: 58 Comm: kworker/0:2 Tainted: G W 5.10.0-test-00006-gc24ef7716d4b #1
[ 13.013333] Hardware name: Freescale i.MX6 Ultralite (Device Tree)
[ 13.019586] Workqueue: events deferred_probe_work_func
[ 13.024845] [<c011055c>] (unwind_backtrace) from [<c010b9fc>] (show_stack+0x10/0x14)
[ 13.032666] [<c010b9fc>] (show_stack) from [<c101851c>] (dump_stack+0xdc/0x104)
[ 13.040052] [<c101851c>] (dump_stack) from [<c0124778>] (__warn+0x100/0x114)
[ 13.047173] [<c0124778>] (__warn) from [<c0124830>] (warn_slowpath_fmt+0xa4/0xb4)
[ 13.054726] [<c0124830>] (warn_slowpath_fmt) from [<c07908e8>] (panel_simple_probe+0x5c0/0x6b8)
[ 13.063495] [<c07908e8>] (panel_simple_probe) from [<c07bc1e0>] (platform_drv_probe+0x6c/0xa4)
[ 13.072183] [<c07bc1e0>] (platform_drv_probe) from [<c07ba158>] (really_probe+0x200/0x3a8)
[ 13.080519] [<c07ba158>] (really_probe) from [<c07ba708>] (driver_probe_device+0x58/0xb4)
[ 13.088769] [<c07ba708>] (driver_probe_device) from [<c07b8ac4>] (bus_for_each_drv+0x70/0xb8)
[ 13.097365] [<c07b8ac4>] (bus_for_each_drv) from [<c07ba500>] (__device_attach+0xdc/0x150)
[ 13.105701] [<c07ba500>] (__device_attach) from [<c07b8c9c>] (bus_probe_device+0x88/0x90)
[ 13.113953] [<c07b8c9c>] (bus_probe_device) from [<c07b98e0>] (deferred_probe_work_func+0x68/0x98)
[ 13.122984] [<c07b98e0>] (deferred_probe_work_func) from [<c0145b84>] (process_one_work+0x21c/0x7f8)
[ 13.132192] [<c0145b84>] (process_one_work) from [<c0146194>] (worker_thread+0x34/0x568)
[ 13.140351] [<c0146194>] (worker_thread) from [<c014d738>] (kthread+0x124/0x160)
[ 13.147817] [<c014d738>] (kthread) from [<c0100134>] (ret_from_fork+0x14/0x20)
[ 13.155098] Exception stack(0xc447bfb0 to 0xc447bff8)
[ 13.160213] bfa0: 00000000 00000000 00000000 00000000
[ 13.168455] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 13.176696] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 13.183610] irq event stamp: 17915
[ 13.187115] hardirqs last enabled at (17923): [<c0194220>] console_unlock+0x4b8/0x61c
[ 13.195284] hardirqs last disabled at (17932): [<c0194204>] console_unlock+0x49c/0x61c
[ 13.203437] softirqs last enabled at (17914): [<c0101754>] __do_softirq+0x474/0x5c4
[ 13.211515] softirqs last disabled at (17951): [<c012d81c>] irq_exit+0x1a4/0x1e4
[ 13.218991] ---[ end trace e465f1043b41b1ae ]---
[ 13.236504] mxsfb 21c8000.lcdif: Cannot connect bridge: -517
[ 13.270448] Generic PHY 20b4000.ethernet-1:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=20b4000.ethernet-1:00, irq=POLL)
[ 13.284390] ------------[ cut here ]------------
[ 13.289387] WARNING: CPU: 0 PID: 58 at ../drivers/gpu/drm/panel/panel-simple.c:577 panel_simple_probe+0x5dc/0x6b8
[ 13.299918] CPU: 0 PID: 58 Comm: kworker/0:2 Tainted: G W 5.10.0-test-00006-gc24ef7716d4b #1
[ 13.309728] Hardware name: Freescale i.MX6 Ultralite (Device Tree)
[ 13.315987] Workqueue: events deferred_probe_work_func
[ 13.321257] [<c011055c>] (unwind_backtrace) from [<c010b9fc>] (show_stack+0x10/0x14)
[ 13.329081] [<c010b9fc>] (show_stack) from [<c101851c>] (dump_stack+0xdc/0x104)
[ 13.336463] [<c101851c>] (dump_stack) from [<c0124778>] (__warn+0x100/0x114)
[ 13.343583] [<c0124778>] (__warn) from [<c0124830>] (warn_slowpath_fmt+0xa4/0xb4)
[ 13.351136] [<c0124830>] (warn_slowpath_fmt) from [<c0790904>] (panel_simple_probe+0x5dc/0x6b8)
[ 13.359908] [<c0790904>] (panel_simple_probe) from [<c07bc1e0>] (platform_drv_probe+0x6c/0xa4)
[ 13.368594] [<c07bc1e0>] (platform_drv_probe) from [<c07ba158>] (really_probe+0x200/0x3a8)
[ 13.376938] [<c07ba158>] (really_probe) from [<c07ba708>] (driver_probe_device+0x58/0xb4)
[ 13.385190] [<c07ba708>] (driver_probe_device) from [<c07b8ac4>] (bus_for_each_drv+0x70/0xb8)
[ 13.393791] [<c07b8ac4>] (bus_for_each_drv) from [<c07ba500>] (__device_attach+0xdc/0x150)
[ 13.402129] [<c07ba500>] (__device_attach) from [<c07b8c9c>] (bus_probe_device+0x88/0x90)
[ 13.410376] [<c07b8c9c>] (bus_probe_device) from [<c07b98e0>] (deferred_probe_work_func+0x68/0x98)
[ 13.419408] [<c07b98e0>] (deferred_probe_work_func) from [<c0145b84>] (process_one_work+0x21c/0x7f8)
[ 13.428618] [<c0145b84>] (process_one_work) from [<c0146194>] (worker_thread+0x34/0x568)
[ 13.436781] [<c0146194>] (worker_thread) from [<c014d738>] (kthread+0x124/0x160)
[ 13.444250] [<c014d738>] (kthread) from [<c0100134>] (ret_from_fork+0x14/0x20)
[ 13.451535] Exception stack(0xc447bfb0 to 0xc447bff8)
[ 13.456650] bfa0: 00000000 00000000 00000000 00000000
[ 13.464892] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 13.473132] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 13.480001] irq event stamp: 20721
[ 13.483509] hardirqs last enabled at (20729): [<c0194220>] console_unlock+0x4b8/0x61c
[ 13.491673] hardirqs last disabled at (20738): [<c0194204>] console_unlock+0x49c/0x61c
[ 13.499810] softirqs last enabled at (20704): [<c0101754>] __do_softirq+0x474/0x5c4
[ 13.507640] softirqs last disabled at (20689): [<c012d81c>] irq_exit+0x1a4/0x1e4
[ 13.515249] ---[ end trace e465f1043b41b1af ]---
[ 13.520076] ------------[ cut here ]------------
[ 13.524782] WARNING: CPU: 0 PID: 58 at ../drivers/gpu/drm/panel/panel-simple.c:580 panel_simple_probe+0x5c0/0x6b8
[ 13.535270] CPU: 0 PID: 58 Comm: kworker/0:2 Tainted: G W 5.10.0-test-00006-gc24ef7716d4b #1
[ 13.545074] Hardware name: Freescale i.MX6 Ultralite (Device Tree)
[ 13.551326] Workqueue: events deferred_probe_work_func
[ 13.556590] [<c011055c>] (unwind_backtrace) from [<c010b9fc>] (show_stack+0x10/0x14)
[ 13.564411] [<c010b9fc>] (show_stack) from [<c101851c>] (dump_stack+0xdc/0x104)
[ 13.571795] [<c101851c>] (dump_stack) from [<c0124778>] (__warn+0x100/0x114)
[ 13.578920] [<c0124778>] (__warn) from [<c0124830>] (warn_slowpath_fmt+0xa4/0xb4)
[ 13.586476] [<c0124830>] (warn_slowpath_fmt) from [<c07908e8>] (panel_simple_probe+0x5c0/0x6b8)
[ 13.595251] [<c07908e8>] (panel_simple_probe) from [<c07bc1e0>] (platform_drv_probe+0x6c/0xa4)
[ 13.603942] [<c07bc1e0>] (platform_drv_probe) from [<c07ba158>] (really_probe+0x200/0x3a8)
[ 13.612279] [<c07ba158>] (really_probe) from [<c07ba708>] (driver_probe_device+0x58/0xb4)
[ 13.620529] [<c07ba708>] (driver_probe_device) from [<c07b8ac4>] (bus_for_each_drv+0x70/0xb8)
[ 13.629127] [<c07b8ac4>] (bus_for_each_drv) from [<c07ba500>] (__device_attach+0xdc/0x150)
[ 13.637463] [<c07ba500>] (__device_attach) from [<c07b8c9c>] (bus_probe_device+0x88/0x90)
[ 13.645720] [<c07b8c9c>] (bus_probe_device) from [<c07b98e0>] (deferred_probe_work_func+0x68/0x98)
[ 13.654755] [<c07b98e0>] (deferred_probe_work_func) from [<c0145b84>] (process_one_work+0x21c/0x7f8)
[ 13.663965] [<c0145b84>] (process_one_work) from [<c0146194>] (worker_thread+0x34/0x568)
[ 13.672130] [<c0146194>] (worker_thread) from [<c014d738>] (kthread+0x124/0x160)
[ 13.679598] [<c014d738>] (kthread) from [<c0100134>] (ret_from_fork+0x14/0x20)
[ 13.686880] Exception stack(0xc447bfb0 to 0xc447bff8)
[ 13.691996] bfa0: 00000000 00000000 00000000 00000000
[ 13.700237] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 13.708477] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 13.715378] irq event stamp: 20799
[ 13.718874] hardirqs last enabled at (20807): [<c0194220>] console_unlock+0x4b8/0x61c
[ 13.727680] hardirqs last disabled at (20822): [<c0194204>] console_unlock+0x49c/0x61c
[ 13.736030] softirqs last enabled at (20840): [<c0101754>] __do_softirq+0x474/0x5c4
[ 13.744038] softirqs last disabled at (20831): [<c012d81c>] irq_exit+0x1a4/0x1e4
[ 13.751662] ---[ end trace e465f1043b41b1b0 ]---
[ 13.769791] Micrel KSZ8081 or KSZ8091 2188000.ethernet-2:01: attached PHY driver [Micrel KSZ8081 or KSZ8091] (mii_bus:phy_addr=2188000.ethernet-2:01, irq=POLL)
[ 13.797274] mxsfb 21c8000.lcdif: Cannot connect bridge: -517
[ 16.927255] fec 2188000.ethernet eth1: Link is Up - 100Mbps/Full - flow control rx/tx
[ 16.952235] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 16.981953] Sending DHCP requests ., OK
[ 17.166963] IP-Config: Got DHCP answer from 192.168.3.1, my address is 192.168.3.21
[ 17.175519] IP-Config: Complete:
[ 17.178960] device=eth1, hwaddr=f8:dc:7a:09:11:68, ipaddr=192.168.3.21, mask=255.255.255.0, gw=192.168.3.1
[ 17.189598] host=192.168.3.21, domain=, nis-domain=(none)
[ 17.195617] bootserver=0.0.0.0, rootserver=192.168.3.13, rootpath=
[ 17.195716] nameserver0=192.168.3.1
[ 17.206918]
[ 17.234781] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 17.251161] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 17.262826] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 17.271933] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
[ 17.280225] ALSA device list:
[ 17.283656] No soundcards found.
[ 17.408810] VFS: Mounted root (nfs filesystem) on device 0:15.
[ 17.428166] devtmpfs: mounted
[ 17.436700] Freeing unused kernel memory: 1024K
[ 17.452975] Run /sbin/init as init process
On Sat, Jan 16, 2021 at 9:49 AM Oliver Graute <[email protected]> wrote:
> > power-supply = <®_touch_3v3> is not correct, as the reg_touch_3v3
> > does not power the LCD.
>
> yes, but how is the LCD correctly powered then?
J4 is powered by VCC_5V and VCC_3V#.
> [ 7.795980] pwm-backlight backlight: supply power not found, using dummy regulator
> [ 7.804436] OF: /backlight: #pwm-cells = 3 found -1
> [ 7.806563] of_pwm_get(): can't parse "pwms" property
> [ 7.812026] pwm-backlight backlight: unable to request PWM
> [ 7.822929] pwm-backlight: probe of backlight failed with error -22
You need to fix this.
> [ 7.876831] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
> [ 7.884231] imx-sdma 20ec000.sdma: Falling back to sysfs fallback for: imx/sdma/sdma-imx6q.bin
> [ 7.916013] printk: console [ttymxc0] enabled
> [ 7.916013] printk: console [ttymxc0] enabled
> [ 7.922351] printk: bootconsole [ec_imx6q0] disabled
> [ 7.922351] printk: bootconsole [ec_imx6q0] disabled
> [ 7.952397] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 68, base_baud = 5000000) is a IMX
> [ 7.970794] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 69, base_baud = 5000000) is a IMX
> [ 8.033015] ------------[ cut here ]------------
> [ 8.037826] WARNING: CPU: 0 PID: 1 at ../drivers/gpu/drm/panel/panel-simple.c:577 panel_simple_probe+0x5dc/0x6b8
And this too
> [ 8.846104] imx6ul-pinctrl 20e0000.pinctrl: pin MX6UL_PAD_NAND_CE0_B already requested by regulator-gpio; cannot claim for 1806000.nand-controller
> [ 8.859641] imx6ul-pinctrl 20e0000.pinctrl: pin-107 (1806000.nand-controller) status -22
> [ 8.867851] imx6ul-pinctrl 20e0000.pinctrl: could not request pin 107 (MX6UL_PAD_NAND_CE0_B) from group gpminandgrp on device 20e0000.pinctrl
> [ 8.880930] gpmi-nand 1806000.nand-controller: Error applying setting, reverse things back
> [ 8.889726] gpmi-nand: probe of 1806000.nand-controller failed with error -22
And this pin conflict too.
Hi Oliver,
On Mon, Jan 25, 2021 at 6:29 PM Oliver Graute <[email protected]> wrote:
> Ok I fixed the pin conflict with regulator-gpio and added a 5V
> regulator node in my dts file. Now the display is working fine!
That's good news :-)
> I'll post the dts files soon and check if there is something to
> improve for this patch.
Did the panel patch I sent earlier work?
https://pastebin.com/raw/diTMVsh8
If it does, I can send it formally if you want.
On 25/01/21, Fabio Estevam wrote:
> Hi Oliver,
>
> On Mon, Jan 25, 2021 at 6:29 PM Oliver Graute <[email protected]> wrote:
>
> > Ok I fixed the pin conflict with regulator-gpio and added a 5V
> > regulator node in my dts file. Now the display is working fine!
>
> That's good news :-)
>
> > I'll post the dts files soon and check if there is something to
> > improve for this patch.
>
> Did the panel patch I sent earlier work?
> https://pastebin.com/raw/diTMVsh8
>
> If it does, I can send it formally if you want.
I would prefer mine, because I got a wrong colored penguin on bootup
with yours :-)
Best regards,
Oliver
On 16/01/21, Fabio Estevam wrote:
> On Sat, Jan 16, 2021 at 9:49 AM Oliver Graute <[email protected]> wrote:
>
> > > power-supply = <®_touch_3v3> is not correct, as the reg_touch_3v3
> > > does not power the LCD.
> >
> > yes, but how is the LCD correctly powered then?
>
> J4 is powered by VCC_5V and VCC_3V#.
>
> > [ 7.795980] pwm-backlight backlight: supply power not found, using dummy regulator
> > [ 7.804436] OF: /backlight: #pwm-cells = 3 found -1
> > [ 7.806563] of_pwm_get(): can't parse "pwms" property
> > [ 7.812026] pwm-backlight backlight: unable to request PWM
> > [ 7.822929] pwm-backlight: probe of backlight failed with error -22
>
> You need to fix this.
>
> > [ 7.876831] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
> > [ 7.884231] imx-sdma 20ec000.sdma: Falling back to sysfs fallback for: imx/sdma/sdma-imx6q.bin
> > [ 7.916013] printk: console [ttymxc0] enabled
> > [ 7.916013] printk: console [ttymxc0] enabled
> > [ 7.922351] printk: bootconsole [ec_imx6q0] disabled
> > [ 7.922351] printk: bootconsole [ec_imx6q0] disabled
> > [ 7.952397] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 68, base_baud = 5000000) is a IMX
> > [ 7.970794] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 69, base_baud = 5000000) is a IMX
> > [ 8.033015] ------------[ cut here ]------------
> > [ 8.037826] WARNING: CPU: 0 PID: 1 at ../drivers/gpu/drm/panel/panel-simple.c:577 panel_simple_probe+0x5dc/0x6b8
>
> And this too
>
> > [ 8.846104] imx6ul-pinctrl 20e0000.pinctrl: pin MX6UL_PAD_NAND_CE0_B already requested by regulator-gpio; cannot claim for 1806000.nand-controller
> > [ 8.859641] imx6ul-pinctrl 20e0000.pinctrl: pin-107 (1806000.nand-controller) status -22
> > [ 8.867851] imx6ul-pinctrl 20e0000.pinctrl: could not request pin 107 (MX6UL_PAD_NAND_CE0_B) from group gpminandgrp on device 20e0000.pinctrl
> > [ 8.880930] gpmi-nand 1806000.nand-controller: Error applying setting, reverse things back
> > [ 8.889726] gpmi-nand: probe of 1806000.nand-controller failed with error -22
>
> And this pin conflict too.
Ok I fixed the pin conflict with regulator-gpio and added a 5V
regulator node in my dts file. Now the display is working fine!
I'll post the dts files soon and check if there is something to
improve for this patch.
Many thanks for your help,
Oliver
Hi Oliver,
On Mon, Jan 25, 2021 at 7:17 PM Oliver Graute <[email protected]> wrote:
> I would prefer mine, because I got a wrong colored penguin on bootup
> with yours :-)
I have originally passed .bpc = 8, but looking at the panel datasheet,
this should be:
.bpc = 6 instead.
In your patch, you pass the timing parameters three times, but they
are all the same.
Usually, it is meant to be: minimal, typical, maximum values.
On 26/01/21, Fabio Estevam wrote:
> Hi Oliver,
>
> On Mon, Jan 25, 2021 at 7:17 PM Oliver Graute <[email protected]> wrote:
>
> > I would prefer mine, because I got a wrong colored penguin on bootup
> > with yours :-)
The wrong colored Tux is caused by the bus_format:
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
So I assume I need another bus_format here.
>
> I have originally passed .bpc = 8, but looking at the panel datasheet,
> this should be:
> .bpc = 6 instead.
yes this is right. I found it too in the datasheet. I'll fix it in next
version of the patch.
>
> In your patch, you pass the timing parameters three times, but they
> are all the same.
>
> Usually, it is meant to be: minimal, typical, maximum values.
yes because on a lot of entries there is just the typical value and no min
and max. But not on all of them.
Best regards,
Oliver