Is there a way to allocate a block of memory that is
a) contiguous in physical layout
b) large (ca. 1M or so)
c) aligned on a large boundary (e.g. 1M boundary) in physical address
I have a hardware device (specifically, the PCIe controller of a Freescale
8641D PPC microprocessor) that requires a large amount of RAM to operate,
and requires that RAM to be aligned on the size of the element (that is,
if you use a 1M buffer, then the starting address of that RAM must be
0x???00000 so that the address translation unit can map from the PCIe
address to the local address).
Hugepages might work, but I see no guarantee that the alignment would be met.
Yes, I could allocate 2x the desired size, then use that part of what I
allocate that is correctly aligned, but then I am guaranteed to waste half
of what I allocate.
I'd rather NOT use the boottime allocation tricks if possible.
Scatter/Gather is not supported by the hardware, so that is out.
Any good suggestions?
On Wed, Aug 25, 2010 at 1:35 PM, <[email protected]> wrote:
> Yes, I could allocate 2x the desired size, then use that part of what I
> allocate that is correctly aligned, but then I am guaranteed to waste half
> of what I allocate.
You can use the mechanism used in alloc_pages_exact() to free the
pages that you don't need.
--
Timur Tabi
Linux kernel developer at Freescale