2021-05-28 11:23:04

by Yannick FERTRE

[permalink] [raw]
Subject: [PATCH] drm/stm: Remove usage of drm_display_mode_to_videomode()

There is not much value in the extra conversion step, the calculations
required for the LTDC IP are different than what is used in the
drm_display_mode_to_videomode(), so just do the right ones in the LTDC
driver right away.

Signed-off-by: Marek Vasut <[email protected]>
Signed-off-by: Yannick Fertre <[email protected]>
---
drivers/gpu/drm/stm/ltdc.c | 32 +++++++++++++++++---------------
1 file changed, 17 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
index e99771b947b6..d113b9be12c0 100644
--- a/drivers/gpu/drm/stm/ltdc.c
+++ b/drivers/gpu/drm/stm/ltdc.c
@@ -570,31 +570,33 @@ static void ltdc_crtc_mode_set_nofb(struct drm_crtc *crtc)
}
}

- drm_display_mode_to_videomode(mode, &vm);
-
DRM_DEBUG_DRIVER("CRTC:%d mode:%s\n", crtc->base.id, mode->name);
- DRM_DEBUG_DRIVER("Video mode: %dx%d", vm.hactive, vm.vactive);
+ DRM_DEBUG_DRIVER("Video mode: %dx%d", mode->hdisplay, mode->vdisplay);
DRM_DEBUG_DRIVER(" hfp %d hbp %d hsl %d vfp %d vbp %d vsl %d\n",
- vm.hfront_porch, vm.hback_porch, vm.hsync_len,
- vm.vfront_porch, vm.vback_porch, vm.vsync_len);
+ mode->hsync_start - mode->hdisplay,
+ mode->htotal - mode->hsync_end,
+ mode->hsync_end - mode->hsync_start,
+ mode->vsync_start - mode->vdisplay,
+ mode->vtotal - mode->vsync_end,
+ mode->vsync_end - mode->vsync_start);

/* Convert video timings to ltdc timings */
- hsync = vm.hsync_len - 1;
- vsync = vm.vsync_len - 1;
- accum_hbp = hsync + vm.hback_porch;
- accum_vbp = vsync + vm.vback_porch;
- accum_act_w = accum_hbp + vm.hactive;
- accum_act_h = accum_vbp + vm.vactive;
- total_width = accum_act_w + vm.hfront_porch;
- total_height = accum_act_h + vm.vfront_porch;
+ hsync = mode->hsync_end - mode->hsync_start - 1;
+ vsync = mode->vsync_end - mode->vsync_start - 1;
+ accum_hbp = mode->htotal - mode->hsync_start - 1;
+ accum_vbp = mode->vtotal - mode->vsync_start - 1;
+ accum_act_w = accum_hbp + mode->hdisplay;
+ accum_act_h = accum_vbp + mode->vdisplay;
+ total_width = mode->htotal - 1;
+ total_height = mode->vtotal - 1;

/* Configures the HS, VS, DE and PC polarities. Default Active Low */
val = 0;

- if (vm.flags & DISPLAY_FLAGS_HSYNC_HIGH)
+ if (mode->flags & DRM_MODE_FLAG_PHSYNC)
val |= GCR_HSPOL;

- if (vm.flags & DISPLAY_FLAGS_VSYNC_HIGH)
+ if (mode->flags & DRM_MODE_FLAG_PVSYNC)
val |= GCR_VSPOL;

if (bus_flags & DRM_BUS_FLAG_DE_LOW)
--
2.17.1


2021-05-28 14:23:50

by Yannick FERTRE

[permalink] [raw]
Subject: Re: [PATCH] drm/stm: Remove usage of drm_display_mode_to_videomode()


Hi Philippe,
I have already reviewed this patch on January 7, 2020.
(https://lore.kernel.org/dri-devel/[email protected]/)
Could you please review it and merge it?

Best regards

Yannick

On 5/28/21 10:05 AM, Yannick Fertre wrote:
> There is not much value in the extra conversion step, the calculations
> required for the LTDC IP are different than what is used in the
> drm_display_mode_to_videomode(), so just do the right ones in the LTDC
> driver right away.
>
> Signed-off-by: Marek Vasut <[email protected]>
> Signed-off-by: Yannick Fertre <[email protected]>
> ---
> drivers/gpu/drm/stm/ltdc.c | 32 +++++++++++++++++---------------
> 1 file changed, 17 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
> index e99771b947b6..d113b9be12c0 100644
> --- a/drivers/gpu/drm/stm/ltdc.c
> +++ b/drivers/gpu/drm/stm/ltdc.c
> @@ -570,31 +570,33 @@ static void ltdc_crtc_mode_set_nofb(struct drm_crtc *crtc)
> }
> }
>
> - drm_display_mode_to_videomode(mode, &vm);
> -
> DRM_DEBUG_DRIVER("CRTC:%d mode:%s\n", crtc->base.id, mode->name);
> - DRM_DEBUG_DRIVER("Video mode: %dx%d", vm.hactive, vm.vactive);
> + DRM_DEBUG_DRIVER("Video mode: %dx%d", mode->hdisplay, mode->vdisplay);
> DRM_DEBUG_DRIVER(" hfp %d hbp %d hsl %d vfp %d vbp %d vsl %d\n",
> - vm.hfront_porch, vm.hback_porch, vm.hsync_len,
> - vm.vfront_porch, vm.vback_porch, vm.vsync_len);
> + mode->hsync_start - mode->hdisplay,
> + mode->htotal - mode->hsync_end,
> + mode->hsync_end - mode->hsync_start,
> + mode->vsync_start - mode->vdisplay,
> + mode->vtotal - mode->vsync_end,
> + mode->vsync_end - mode->vsync_start);
>
> /* Convert video timings to ltdc timings */
> - hsync = vm.hsync_len - 1;
> - vsync = vm.vsync_len - 1;
> - accum_hbp = hsync + vm.hback_porch;
> - accum_vbp = vsync + vm.vback_porch;
> - accum_act_w = accum_hbp + vm.hactive;
> - accum_act_h = accum_vbp + vm.vactive;
> - total_width = accum_act_w + vm.hfront_porch;
> - total_height = accum_act_h + vm.vfront_porch;
> + hsync = mode->hsync_end - mode->hsync_start - 1;
> + vsync = mode->vsync_end - mode->vsync_start - 1;
> + accum_hbp = mode->htotal - mode->hsync_start - 1;
> + accum_vbp = mode->vtotal - mode->vsync_start - 1;
> + accum_act_w = accum_hbp + mode->hdisplay;
> + accum_act_h = accum_vbp + mode->vdisplay;
> + total_width = mode->htotal - 1;
> + total_height = mode->vtotal - 1;
>
> /* Configures the HS, VS, DE and PC polarities. Default Active Low */
> val = 0;
>
> - if (vm.flags & DISPLAY_FLAGS_HSYNC_HIGH)
> + if (mode->flags & DRM_MODE_FLAG_PHSYNC)
> val |= GCR_HSPOL;
>
> - if (vm.flags & DISPLAY_FLAGS_VSYNC_HIGH)
> + if (mode->flags & DRM_MODE_FLAG_PVSYNC)
> val |= GCR_VSPOL;
>
> if (bus_flags & DRM_BUS_FLAG_DE_LOW)
>

2021-06-01 10:21:29

by Philippe CORNU

[permalink] [raw]
Subject: Re: [PATCH] drm/stm: Remove usage of drm_display_mode_to_videomode()

Hi Marek,

Many thanks for your patch and sorry for the delay regarding this "last
Christmas" patch (Dec. 24, 2020), lost in my inbox :(

Could you please resend it (as I did not succeed to apply it directly)?

patchwork reference
https://patchwork.freedesktop.org/patch/409968/?series=85222

Many thanks,
Philippe :-)


On 5/28/21 4:01 PM, yannick Fertre wrote:
>
> Hi Philippe,
> I have already reviewed this patch on January 7, 2020.
> (https://lore.kernel.org/dri-devel/[email protected]/)
>
> Could you please review it and merge it?
>
> Best regards
>
> Yannick
>
> On 5/28/21 10:05 AM, Yannick Fertre wrote:
>> There is not much value in the extra conversion step, the calculations
>> required for the LTDC IP are different than what is used in the
>> drm_display_mode_to_videomode(), so just do the right ones in the LTDC
>> driver right away.
>>
>> Signed-off-by: Marek Vasut <[email protected]>
>> Signed-off-by: Yannick Fertre <[email protected]>
>> ---
>>   drivers/gpu/drm/stm/ltdc.c | 32 +++++++++++++++++---------------
>>   1 file changed, 17 insertions(+), 15 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
>> index e99771b947b6..d113b9be12c0 100644
>> --- a/drivers/gpu/drm/stm/ltdc.c
>> +++ b/drivers/gpu/drm/stm/ltdc.c
>> @@ -570,31 +570,33 @@ static void ltdc_crtc_mode_set_nofb(struct
>> drm_crtc *crtc)
>>           }
>>       }
>> -    drm_display_mode_to_videomode(mode, &vm);
>> -
>>       DRM_DEBUG_DRIVER("CRTC:%d mode:%s\n", crtc->base.id, mode->name);
>> -    DRM_DEBUG_DRIVER("Video mode: %dx%d", vm.hactive, vm.vactive);
>> +    DRM_DEBUG_DRIVER("Video mode: %dx%d", mode->hdisplay,
>> mode->vdisplay);
>>       DRM_DEBUG_DRIVER(" hfp %d hbp %d hsl %d vfp %d vbp %d vsl %d\n",
>> -             vm.hfront_porch, vm.hback_porch, vm.hsync_len,
>> -             vm.vfront_porch, vm.vback_porch, vm.vsync_len);
>> +             mode->hsync_start - mode->hdisplay,
>> +             mode->htotal - mode->hsync_end,
>> +             mode->hsync_end - mode->hsync_start,
>> +             mode->vsync_start - mode->vdisplay,
>> +             mode->vtotal - mode->vsync_end,
>> +             mode->vsync_end - mode->vsync_start);
>>       /* Convert video timings to ltdc timings */
>> -    hsync = vm.hsync_len - 1;
>> -    vsync = vm.vsync_len - 1;
>> -    accum_hbp = hsync + vm.hback_porch;
>> -    accum_vbp = vsync + vm.vback_porch;
>> -    accum_act_w = accum_hbp + vm.hactive;
>> -    accum_act_h = accum_vbp + vm.vactive;
>> -    total_width = accum_act_w + vm.hfront_porch;
>> -    total_height = accum_act_h + vm.vfront_porch;
>> +    hsync = mode->hsync_end - mode->hsync_start - 1;
>> +    vsync = mode->vsync_end - mode->vsync_start - 1;
>> +    accum_hbp = mode->htotal - mode->hsync_start - 1;
>> +    accum_vbp = mode->vtotal - mode->vsync_start - 1;
>> +    accum_act_w = accum_hbp + mode->hdisplay;
>> +    accum_act_h = accum_vbp + mode->vdisplay;
>> +    total_width = mode->htotal - 1;
>> +    total_height = mode->vtotal - 1;
>>       /* Configures the HS, VS, DE and PC polarities. Default Active
>> Low */
>>       val = 0;
>> -    if (vm.flags & DISPLAY_FLAGS_HSYNC_HIGH)
>> +    if (mode->flags & DRM_MODE_FLAG_PHSYNC)
>>           val |= GCR_HSPOL;
>> -    if (vm.flags & DISPLAY_FLAGS_VSYNC_HIGH)
>> +    if (mode->flags & DRM_MODE_FLAG_PVSYNC)
>>           val |= GCR_VSPOL;
>>       if (bus_flags & DRM_BUS_FLAG_DE_LOW)
>>