2022-12-30 11:55:03

by Ilpo Järvinen

[permalink] [raw]
Subject: [PATCH 2/3] serial: 8250_rt288x: Name non-standard divisor latch reg

Instead of a literal, add proper name for the non-standard divisor
latch register.

Signed-off-by: Ilpo Järvinen <[email protected]>
---
drivers/tty/serial/8250/8250_rt288x.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_rt288x.c b/drivers/tty/serial/8250/8250_rt288x.c
index cb9a86bd3a07..3015afb99722 100644
--- a/drivers/tty/serial/8250/8250_rt288x.c
+++ b/drivers/tty/serial/8250/8250_rt288x.c
@@ -12,6 +12,8 @@

#include "8250.h"

+#define RT288X_DL 0x28
+
#define UART_REG_UNMAPPED -1

/* Au1x00/RT288x UART hardware has a weird register layout */
@@ -60,12 +62,12 @@ static void au_serial_out(struct uart_port *p, int offset, int value)
/* Au1x00 haven't got a standard divisor latch */
static int au_serial_dl_read(struct uart_8250_port *up)
{
- return __raw_readl(up->port.membase + 0x28);
+ return __raw_readl(up->port.membase + RT288X_DL);
}

static void au_serial_dl_write(struct uart_8250_port *up, int value)
{
- __raw_writel(value, up->port.membase + 0x28);
+ __raw_writel(value, up->port.membase + RT288X_DL);
}

int au_platform_setup(struct plat_serial8250_port *p)
--
2.30.2


2022-12-30 13:17:05

by Philippe Mathieu-Daudé

[permalink] [raw]
Subject: Re: [PATCH 2/3] serial: 8250_rt288x: Name non-standard divisor latch reg

On 30/12/22 12:46, Ilpo Järvinen wrote:
> Instead of a literal, add proper name for the non-standard divisor
> latch register.
>
> Signed-off-by: Ilpo Järvinen <[email protected]>
> ---
> drivers/tty/serial/8250/8250_rt288x.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)

Reviewed-by: Philippe Mathieu-Daudé <[email protected]>