The Realtek PC Beep Hidden Register[1] is currently set by
patch_realtek.c in two different places:
In alc_fill_eapd_coef(), it's set to the value 0x5757, corresponding to
non-beep input on 1Ah and no 1Ah loopback to either headphones or
speakers. (Although, curiously, the loopback amp is still enabled.) This
write was added fairly recently by commit e3743f431143 ("ALSA:
hda/realtek - Dell headphone has noise on unmute for ALC236") and is a
safe default. However, it happens in the wrong place:
alc_fill_eapd_coef() runs on module load and cold boot but not on S3
resume, meaning the register loses its value after suspend.
Conversely, in alc256_init(), the register is updated to unset bit 13
(disable speaker loopback) and set bit 5 (set non-beep input on 1Ah).
Although this write does run on S3 resume, it's not quite enough to fix
up the register's default value of 0x3717. What's missing is a set of
bit 14 to disable headphone loopback. Without that, we end up with a
feedback loop where the headphone jack is being driven by amplified
samples of itself[2].
This change eliminates the write in alc_fill_eapd_coef() and replaces
the update in alc256_init() with a write of the fixed value 0x4727. This
value ought to have the same behavior as 0x5757--disabling all PC Beep
routing that isn't part of the HDA node graph--but it has two
differences:
1. To enable non-beep input on 1Ah, the `b` field is set to 1, like the
previous code in alc256_init() used, instead of 2, like the value
written by alc_fill_eapd_coef() used. My testing shows these two
values to behave identically, but, in case there is a difference,
a bitwise update of the register seems like a more reliable source
of truth than a magic number written without explanation.
2. Loopback amplification is disabled (unset L and R bits) because no
loopback path is in use.
Affects the ALC255, ALC256, ALC257, ALC235, and ALC236 codecs.
[1] Newly documented in Documentation/sound/hd-audio/realtek-pc-beep.rst
[2] Setting the "Headphone Mic Boost" control from userspace changes
this feedback loop and has been a widely-shared workaround for headphone
noise on laptops like the Dell XPS 13 9350. This commit eliminates the
feedback loop and makes the workaround unnecessary.
Fixes: e3743f431143 ("ALSA: hda/realtek - Dell headphone has noise on unmute for ALC236")
Cc: [email protected]
Signed-off-by: Thomas Hebb <[email protected]>
---
sound/pci/hda/patch_realtek.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 63e1a56f705b..024dd61a788b 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -367,7 +367,9 @@ static void alc_fill_eapd_coef(struct hda_codec *codec)
case 0x10ec0215:
case 0x10ec0233:
case 0x10ec0235:
+ case 0x10ec0236:
case 0x10ec0255:
+ case 0x10ec0256:
case 0x10ec0257:
case 0x10ec0282:
case 0x10ec0283:
@@ -379,11 +381,6 @@ static void alc_fill_eapd_coef(struct hda_codec *codec)
case 0x10ec0300:
alc_update_coef_idx(codec, 0x10, 1<<9, 0);
break;
- case 0x10ec0236:
- case 0x10ec0256:
- alc_write_coef_idx(codec, 0x36, 0x5757);
- alc_update_coef_idx(codec, 0x10, 1<<9, 0);
- break;
case 0x10ec0275:
alc_update_coef_idx(codec, 0xe, 0, 1<<0);
break;
@@ -3269,7 +3266,13 @@ static void alc256_init(struct hda_codec *codec)
alc_update_coefex_idx(codec, 0x57, 0x04, 0x0007, 0x4); /* Hight power */
alc_update_coefex_idx(codec, 0x53, 0x02, 0x8000, 1 << 15); /* Clear bit */
alc_update_coefex_idx(codec, 0x53, 0x02, 0x8000, 0 << 15);
- alc_update_coef_idx(codec, 0x36, 1 << 13, 1 << 5); /* Switch pcbeep path to Line in path*/
+ /*
+ * Expose headphone mic (or possibly Line In on some machines) instead
+ * of PC Beep on 1Ah, and disable 1Ah loopback for all outputs. See
+ * Documentation/sound/hd-audio/realtek-pc-beep.rst for details of
+ * this register.
+ */
+ alc_write_coef_idx(codec, 0x36, 0x4727);
}
static void alc256_shutup(struct hda_codec *codec)
--
2.25.2