Before commit 9495b7e92f716ab2 ("driver core: platform: Initialize
dma_parms for platform devices"), the R-Car SATA device didn't have DMA
parameters. Hence the DMA boundary mask supplied by its driver was
silently ignored, as __scsi_init_queue() doesn't check the return value
of dma_set_seg_boundary(), and the default value of 0xffffffff was used.
Now the device has gained DMA parameters, the driver-supplied value is
used, and the following warning is printed on Salvator-XS:
DMA-API: sata_rcar ee300000.sata: mapping sg segment across boundary [start=0x00000000ffffe000] [end=0x00000000ffffefff] [boundary=0x000000001ffffffe]
WARNING: CPU: 5 PID: 38 at kernel/dma/debug.c:1233 debug_dma_map_sg+0x298/0x300
(the range of start/end values depend on whether IOMMU support is
enabled or not)
The issue here is that SATA_RCAR_DMA_BOUNDARY doesn't have bit 0 set, so
any typical end value, which is odd, will trigger the check.
Fix this by increasing the DMA boundary value by 1.
This also fixes the following WRITE DMA EXT timeout issue:
# dd if=/dev/urandom of=/mnt/de1/file1-1024M bs=1M count=1024
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: failed command: WRITE DMA EXT
ata1.00: cmd 35/00:00:00:e6:0c/00:0a:00:00:00/e0 tag 0 dma 1310720 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
as seen by Shimoda-san since commit 429120f3df2dba2b ("block: fix
splitting segments on boundary masks").
Fixes: 8bfbeed58665dbbf ("sata_rcar: correct 'sata_rcar_sht'")
Fixes: 9495b7e92f716ab2 ("driver core: platform: Initialize dma_parms for platform devices")
Fixes: 429120f3df2dba2b ("block: fix splitting segments on boundary masks")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Reviewed-by: Sergei Shtylyov <[email protected]>
Reviewed-by: Ulf Hansson <[email protected]>
Tested-by: Lad Prabhakar <[email protected]>
Tested-by: Yoshihiro Shimoda <[email protected]>
Cc: stable <[email protected]>
---
v3:
- Add Reviewed-by, Tested-by,
- Augment description and Fixes: with Shimoda-san's problem report
https://lore.kernel.org/r/1600255098-21411-1-git-send-email-yoshihiro.shimoda.uh@renesas.com,
v2:
- Add Reviewed-by, Tested-by, Cc.
---
drivers/ata/sata_rcar.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
index 141ac600b64c87ef..44b0ed8f6bb8a120 100644
--- a/drivers/ata/sata_rcar.c
+++ b/drivers/ata/sata_rcar.c
@@ -120,7 +120,7 @@
/* Descriptor table word 0 bit (when DTA32M = 1) */
#define SATA_RCAR_DTEND BIT(0)
-#define SATA_RCAR_DMA_BOUNDARY 0x1FFFFFFEUL
+#define SATA_RCAR_DMA_BOUNDARY 0x1FFFFFFFUL
/* Gen2 Physical Layer Control Registers */
#define RCAR_GEN2_PHY_CTL1_REG 0x1704
--
2.17.1
Hi Jens,
On Thu, Sep 17, 2020 at 3:09 PM Geert Uytterhoeven
<[email protected]> wrote:
> Before commit 9495b7e92f716ab2 ("driver core: platform: Initialize
> dma_parms for platform devices"), the R-Car SATA device didn't have DMA
> parameters. Hence the DMA boundary mask supplied by its driver was
> silently ignored, as __scsi_init_queue() doesn't check the return value
> of dma_set_seg_boundary(), and the default value of 0xffffffff was used.
>
> Now the device has gained DMA parameters, the driver-supplied value is
> used, and the following warning is printed on Salvator-XS:
>
> DMA-API: sata_rcar ee300000.sata: mapping sg segment across boundary [start=0x00000000ffffe000] [end=0x00000000ffffefff] [boundary=0x000000001ffffffe]
> WARNING: CPU: 5 PID: 38 at kernel/dma/debug.c:1233 debug_dma_map_sg+0x298/0x300
>
> (the range of start/end values depend on whether IOMMU support is
> enabled or not)
>
> The issue here is that SATA_RCAR_DMA_BOUNDARY doesn't have bit 0 set, so
> any typical end value, which is odd, will trigger the check.
>
> Fix this by increasing the DMA boundary value by 1.
>
> This also fixes the following WRITE DMA EXT timeout issue:
>
> # dd if=/dev/urandom of=/mnt/de1/file1-1024M bs=1M count=1024
> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata1.00: failed command: WRITE DMA EXT
> ata1.00: cmd 35/00:00:00:e6:0c/00:0a:00:00:00/e0 tag 0 dma 1310720 out
> res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata1.00: status: { DRDY }
>
> as seen by Shimoda-san since commit 429120f3df2dba2b ("block: fix
> splitting segments on boundary masks").
>
> Fixes: 8bfbeed58665dbbf ("sata_rcar: correct 'sata_rcar_sht'")
> Fixes: 9495b7e92f716ab2 ("driver core: platform: Initialize dma_parms for platform devices")
> Fixes: 429120f3df2dba2b ("block: fix splitting segments on boundary masks")
> Signed-off-by: Geert Uytterhoeven <[email protected]>
> Reviewed-by: Christoph Hellwig <[email protected]>
> Reviewed-by: Greg Kroah-Hartman <[email protected]>
> Reviewed-by: Sergei Shtylyov <[email protected]>
> Reviewed-by: Ulf Hansson <[email protected]>
> Tested-by: Lad Prabhakar <[email protected]>
> Tested-by: Yoshihiro Shimoda <[email protected]>
> Cc: stable <[email protected]>
Can you please apply this patch?
This is a fix for a regression in v5.7-rc5, and was first posted almost
5 months ago.
Thanks!
> ---
> v3:
> - Add Reviewed-by, Tested-by,
> - Augment description and Fixes: with Shimoda-san's problem report
> https://lore.kernel.org/r/1600255098-21411-1-git-send-email-yoshihiro.shimoda.uh@renesas.com,
>
> v2:
> - Add Reviewed-by, Tested-by, Cc.
> ---
> drivers/ata/sata_rcar.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
> index 141ac600b64c87ef..44b0ed8f6bb8a120 100644
> --- a/drivers/ata/sata_rcar.c
> +++ b/drivers/ata/sata_rcar.c
> @@ -120,7 +120,7 @@
> /* Descriptor table word 0 bit (when DTA32M = 1) */
> #define SATA_RCAR_DTEND BIT(0)
>
> -#define SATA_RCAR_DMA_BOUNDARY 0x1FFFFFFEUL
> +#define SATA_RCAR_DMA_BOUNDARY 0x1FFFFFFFUL
>
> /* Gen2 Physical Layer Control Registers */
> #define RCAR_GEN2_PHY_CTL1_REG 0x1704
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
On 10/15/20 12:34 PM, Geert Uytterhoeven wrote:
> Hi Jens,
>
> On Thu, Sep 17, 2020 at 3:09 PM Geert Uytterhoeven
> <[email protected]> wrote:
>> Before commit 9495b7e92f716ab2 ("driver core: platform: Initialize
>> dma_parms for platform devices"), the R-Car SATA device didn't have DMA
>> parameters. Hence the DMA boundary mask supplied by its driver was
>> silently ignored, as __scsi_init_queue() doesn't check the return value
>> of dma_set_seg_boundary(), and the default value of 0xffffffff was used.
>>
>> Now the device has gained DMA parameters, the driver-supplied value is
>> used, and the following warning is printed on Salvator-XS:
>>
>> DMA-API: sata_rcar ee300000.sata: mapping sg segment across boundary [start=0x00000000ffffe000] [end=0x00000000ffffefff] [boundary=0x000000001ffffffe]
>> WARNING: CPU: 5 PID: 38 at kernel/dma/debug.c:1233 debug_dma_map_sg+0x298/0x300
>>
>> (the range of start/end values depend on whether IOMMU support is
>> enabled or not)
>>
>> The issue here is that SATA_RCAR_DMA_BOUNDARY doesn't have bit 0 set, so
>> any typical end value, which is odd, will trigger the check.
>>
>> Fix this by increasing the DMA boundary value by 1.
>>
>> This also fixes the following WRITE DMA EXT timeout issue:
>>
>> # dd if=/dev/urandom of=/mnt/de1/file1-1024M bs=1M count=1024
>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>> ata1.00: failed command: WRITE DMA EXT
>> ata1.00: cmd 35/00:00:00:e6:0c/00:0a:00:00:00/e0 tag 0 dma 1310720 out
>> res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>> ata1.00: status: { DRDY }
>>
>> as seen by Shimoda-san since commit 429120f3df2dba2b ("block: fix
>> splitting segments on boundary masks").
>>
>> Fixes: 8bfbeed58665dbbf ("sata_rcar: correct 'sata_rcar_sht'")
>> Fixes: 9495b7e92f716ab2 ("driver core: platform: Initialize dma_parms for platform devices")
>> Fixes: 429120f3df2dba2b ("block: fix splitting segments on boundary masks")
>> Signed-off-by: Geert Uytterhoeven <[email protected]>
>> Reviewed-by: Christoph Hellwig <[email protected]>
>> Reviewed-by: Greg Kroah-Hartman <[email protected]>
>> Reviewed-by: Sergei Shtylyov <[email protected]>
>> Reviewed-by: Ulf Hansson <[email protected]>
>> Tested-by: Lad Prabhakar <[email protected]>
>> Tested-by: Yoshihiro Shimoda <[email protected]>
>> Cc: stable <[email protected]>
>
> Can you please apply this patch?
> This is a fix for a regression in v5.7-rc5, and was first posted almost
> 5 months ago.
Applied, sorry that got missed.
--
Jens Axboe
On Thu, Sep 17, 2020 at 4:12 PM Geert Uytterhoeven
<[email protected]> wrote:
>
> Before commit 9495b7e92f716ab2 ("driver core: platform: Initialize
> dma_parms for platform devices"), the R-Car SATA device didn't have DMA
> parameters. Hence the DMA boundary mask supplied by its driver was
> silently ignored, as __scsi_init_queue() doesn't check the return value
> of dma_set_seg_boundary(), and the default value of 0xffffffff was used.
>
> Now the device has gained DMA parameters, the driver-supplied value is
> used, and the following warning is printed on Salvator-XS:
>
> DMA-API: sata_rcar ee300000.sata: mapping sg segment across boundary [start=0x00000000ffffe000] [end=0x00000000ffffefff] [boundary=0x000000001ffffffe]
> WARNING: CPU: 5 PID: 38 at kernel/dma/debug.c:1233 debug_dma_map_sg+0x298/0x300
>
> (the range of start/end values depend on whether IOMMU support is
> enabled or not)
>
> The issue here is that SATA_RCAR_DMA_BOUNDARY doesn't have bit 0 set, so
> any typical end value, which is odd, will trigger the check.
>
> Fix this by increasing the DMA boundary value by 1.
>
> This also fixes the following WRITE DMA EXT timeout issue:
>
> # dd if=/dev/urandom of=/mnt/de1/file1-1024M bs=1M count=1024
> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> ata1.00: failed command: WRITE DMA EXT
> ata1.00: cmd 35/00:00:00:e6:0c/00:0a:00:00:00/e0 tag 0 dma 1310720 out
> res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata1.00: status: { DRDY }
>
> as seen by Shimoda-san since commit 429120f3df2dba2b ("block: fix
> splitting segments on boundary masks").
>
> Fixes: 8bfbeed58665dbbf ("sata_rcar: correct 'sata_rcar_sht'")
> Fixes: 9495b7e92f716ab2 ("driver core: platform: Initialize dma_parms for platform devices")
> Fixes: 429120f3df2dba2b ("block: fix splitting segments on boundary masks")
> Signed-off-by: Geert Uytterhoeven <[email protected]>
> Reviewed-by: Christoph Hellwig <[email protected]>
> Reviewed-by: Greg Kroah-Hartman <[email protected]>
> Reviewed-by: Sergei Shtylyov <[email protected]>
> Reviewed-by: Ulf Hansson <[email protected]>
> Tested-by: Lad Prabhakar <[email protected]>
> Tested-by: Yoshihiro Shimoda <[email protected]>
> Cc: stable <[email protected]>
> ---
> v3:
> - Add Reviewed-by, Tested-by,
> - Augment description and Fixes: with Shimoda-san's problem report
> https://lore.kernel.org/r/1600255098-21411-1-git-send-email-yoshihiro.shimoda.uh@renesas.com,
>
> v2:
> - Add Reviewed-by, Tested-by, Cc.
> ---
> drivers/ata/sata_rcar.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
> index 141ac600b64c87ef..44b0ed8f6bb8a120 100644
> --- a/drivers/ata/sata_rcar.c
> +++ b/drivers/ata/sata_rcar.c
> @@ -120,7 +120,7 @@
> /* Descriptor table word 0 bit (when DTA32M = 1) */
> #define SATA_RCAR_DTEND BIT(0)
>
> -#define SATA_RCAR_DMA_BOUNDARY 0x1FFFFFFEUL
> +#define SATA_RCAR_DMA_BOUNDARY 0x1FFFFFFFUL
Wondering if GENMASK() here will be better to avoid such mistakes.
>
> /* Gen2 Physical Layer Control Registers */
> #define RCAR_GEN2_PHY_CTL1_REG 0x1704
> --
> 2.17.1
>
--
With Best Regards,
Andy Shevchenko
On 10/16/20 7:40 PM, Andy Shevchenko wrote:
>> Before commit 9495b7e92f716ab2 ("driver core: platform: Initialize
>> dma_parms for platform devices"), the R-Car SATA device didn't have DMA
>> parameters. Hence the DMA boundary mask supplied by its driver was
>> silently ignored, as __scsi_init_queue() doesn't check the return value
>> of dma_set_seg_boundary(), and the default value of 0xffffffff was used.
>>
>> Now the device has gained DMA parameters, the driver-supplied value is
>> used, and the following warning is printed on Salvator-XS:
>>
>> DMA-API: sata_rcar ee300000.sata: mapping sg segment across boundary [start=0x00000000ffffe000] [end=0x00000000ffffefff] [boundary=0x000000001ffffffe]
>> WARNING: CPU: 5 PID: 38 at kernel/dma/debug.c:1233 debug_dma_map_sg+0x298/0x300
>>
>> (the range of start/end values depend on whether IOMMU support is
>> enabled or not)
>>
>> The issue here is that SATA_RCAR_DMA_BOUNDARY doesn't have bit 0 set, so
>> any typical end value, which is odd, will trigger the check.
>>
>> Fix this by increasing the DMA boundary value by 1.
>>
>> This also fixes the following WRITE DMA EXT timeout issue:
>>
>> # dd if=/dev/urandom of=/mnt/de1/file1-1024M bs=1M count=1024
>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>> ata1.00: failed command: WRITE DMA EXT
>> ata1.00: cmd 35/00:00:00:e6:0c/00:0a:00:00:00/e0 tag 0 dma 1310720 out
>> res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>> ata1.00: status: { DRDY }
>>
>> as seen by Shimoda-san since commit 429120f3df2dba2b ("block: fix
>> splitting segments on boundary masks").
>>
>> Fixes: 8bfbeed58665dbbf ("sata_rcar: correct 'sata_rcar_sht'")
>> Fixes: 9495b7e92f716ab2 ("driver core: platform: Initialize dma_parms for platform devices")
>> Fixes: 429120f3df2dba2b ("block: fix splitting segments on boundary masks")
>> Signed-off-by: Geert Uytterhoeven <[email protected]>
>> Reviewed-by: Christoph Hellwig <[email protected]>
>> Reviewed-by: Greg Kroah-Hartman <[email protected]>
>> Reviewed-by: Sergei Shtylyov <[email protected]>
>> Reviewed-by: Ulf Hansson <[email protected]>
>> Tested-by: Lad Prabhakar <[email protected]>
>> Tested-by: Yoshihiro Shimoda <[email protected]>
>> Cc: stable <[email protected]>
>> ---
>> v3:
>> - Add Reviewed-by, Tested-by,
>> - Augment description and Fixes: with Shimoda-san's problem report
>> https://lore.kernel.org/r/1600255098-21411-1-git-send-email-yoshihiro.shimoda.uh@renesas.com,
>>
>> v2:
>> - Add Reviewed-by, Tested-by, Cc.
>> ---
>> drivers/ata/sata_rcar.c | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
>> index 141ac600b64c87ef..44b0ed8f6bb8a120 100644
>> --- a/drivers/ata/sata_rcar.c
>> +++ b/drivers/ata/sata_rcar.c
>> @@ -120,7 +120,7 @@
>> /* Descriptor table word 0 bit (when DTA32M = 1) */
>> #define SATA_RCAR_DTEND BIT(0)
>>
>> -#define SATA_RCAR_DMA_BOUNDARY 0x1FFFFFFEUL
>> +#define SATA_RCAR_DMA_BOUNDARY 0x1FFFFFFFUL
>
> Wondering if GENMASK() here will be better to avoid such mistakes.
How? The bit 0 is reserved, so only even byte counts are possiblŠµ...
[...]
MBR, Sergei
Hi Sergei,
On Sat, Oct 17, 2020 at 9:15 PM Sergei Shtylyov
<[email protected]> wrote:
> On 10/16/20 7:40 PM, Andy Shevchenko wrote:
> >> Before commit 9495b7e92f716ab2 ("driver core: platform: Initialize
> >> dma_parms for platform devices"), the R-Car SATA device didn't have DMA
> >> parameters. Hence the DMA boundary mask supplied by its driver was
> >> silently ignored, as __scsi_init_queue() doesn't check the return value
> >> of dma_set_seg_boundary(), and the default value of 0xffffffff was used.
> >>
> >> Now the device has gained DMA parameters, the driver-supplied value is
> >> used, and the following warning is printed on Salvator-XS:
> >>
> >> DMA-API: sata_rcar ee300000.sata: mapping sg segment across boundary [start=0x00000000ffffe000] [end=0x00000000ffffefff] [boundary=0x000000001ffffffe]
> >> WARNING: CPU: 5 PID: 38 at kernel/dma/debug.c:1233 debug_dma_map_sg+0x298/0x300
> >>
> >> (the range of start/end values depend on whether IOMMU support is
> >> enabled or not)
> >>
> >> The issue here is that SATA_RCAR_DMA_BOUNDARY doesn't have bit 0 set, so
> >> any typical end value, which is odd, will trigger the check.
> >>
> >> Fix this by increasing the DMA boundary value by 1.
> >>
> >> This also fixes the following WRITE DMA EXT timeout issue:
> >>
> >> # dd if=/dev/urandom of=/mnt/de1/file1-1024M bs=1M count=1024
> >> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> >> ata1.00: failed command: WRITE DMA EXT
> >> ata1.00: cmd 35/00:00:00:e6:0c/00:0a:00:00:00/e0 tag 0 dma 1310720 out
> >> res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> >> ata1.00: status: { DRDY }
> >>
> >> as seen by Shimoda-san since commit 429120f3df2dba2b ("block: fix
> >> splitting segments on boundary masks").
> >>
> >> Fixes: 8bfbeed58665dbbf ("sata_rcar: correct 'sata_rcar_sht'")
> >> Fixes: 9495b7e92f716ab2 ("driver core: platform: Initialize dma_parms for platform devices")
> >> Fixes: 429120f3df2dba2b ("block: fix splitting segments on boundary masks")
> >> Signed-off-by: Geert Uytterhoeven <[email protected]>
> >> Reviewed-by: Christoph Hellwig <[email protected]>
> >> Reviewed-by: Greg Kroah-Hartman <[email protected]>
> >> Reviewed-by: Sergei Shtylyov <[email protected]>
> >> Reviewed-by: Ulf Hansson <[email protected]>
> >> Tested-by: Lad Prabhakar <[email protected]>
> >> Tested-by: Yoshihiro Shimoda <[email protected]>
> >> Cc: stable <[email protected]>
> >> ---
> >> v3:
> >> - Add Reviewed-by, Tested-by,
> >> - Augment description and Fixes: with Shimoda-san's problem report
> >> https://lore.kernel.org/r/1600255098-21411-1-git-send-email-yoshihiro.shimoda.uh@renesas.com,
> >>
> >> v2:
> >> - Add Reviewed-by, Tested-by, Cc.
> >> ---
> >> drivers/ata/sata_rcar.c | 2 +-
> >> 1 file changed, 1 insertion(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
> >> index 141ac600b64c87ef..44b0ed8f6bb8a120 100644
> >> --- a/drivers/ata/sata_rcar.c
> >> +++ b/drivers/ata/sata_rcar.c
> >> @@ -120,7 +120,7 @@
> >> /* Descriptor table word 0 bit (when DTA32M = 1) */
> >> #define SATA_RCAR_DTEND BIT(0)
> >>
> >> -#define SATA_RCAR_DMA_BOUNDARY 0x1FFFFFFEUL
> >> +#define SATA_RCAR_DMA_BOUNDARY 0x1FFFFFFFUL
> >
> > Wondering if GENMASK() here will be better to avoid such mistakes.
>
> How? The bit 0 is reserved, so only even byte counts are possiblŠµ...
The DMA Transfer Count Register (ATAPI_DMA_TRANS_CNT) indeed does not
support odd values ("Bit 0 is ignored because the ATAPI data bus is
handled on a 16-bit basis (on a word basis)"), and is limited to
transfers less than 512 MiB.
Similarly the DMA Start Address Register (ATAPI_DMA_START_ADR) requires
that start address to be 32-bit aligned.
I believe the alignment and even size restrictions are met by the block
layer, by performing only transfers that are a multiple of the device's
block size (512 bytes minimum).
However, the SATA_RCAR_DMA_BOUNDARY definition is only used to set the
DMA boundary mask, which limits the MSB bits of an address. The LSB
bits of the mask should always be set, as a typical segment end (=
length - 1, i.e. ending in 0x1ff for a 512-byte block size) will always
have the 9 LSB bits set, else it will trigger the warning.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds