On 9/6/2023 4:54 PM, Apurva Nandan wrote:
> Two carveout reserved memory nodes each have been added for each of the
> R5F remote processor device within both the MCU and MAIN domains for the
> TI K3 AM69 SK boards. These nodes are assigned to the respective rproc
> device nodes as well. The first region will be used as the DMA pool for
> the rproc device, and the second region will furnish the static carveout
> regions for the firmware memory.
>
> The current carveout addresses and sizes are defined statically for each
> device. The R5F processors do not have an MMU, and as such require the
> exact memory used by the firmwares to be set-aside. The firmware images
> do not require any RSC_CARVEOUT entries in their resource tables either
> to allocate the memory for firmware memory segments.
>
> Note that the R5F1 carveouts are needed only if the R5F cluster is
> running in Split (non-LockStep) mode. The reserved memory nodes can be
> disabled later on if there is no use-case defined to use the corresponding
> remote processor.
>
> Signed-off-by: Sinthu Raja <[email protected]>
> Signed-off-by: Apurva Nandan <[email protected]>
> ---
> arch/arm64/boot/dts/ti/k3-am69-sk.dts | 200 ++++++++++++++++++++++++++
> 1 file changed, 200 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
> index d282c2c633c1..d5a39caf15af 100644
> --- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
> @@ -47,6 +47,102 @@ secure_ddr: optee@9e800000 {
> reg = <0x00 0x9e800000 0x00 0x01800000>;
> no-map;
> };
Reviewed by: Udit Kumar<[email protected]>
> [...]