2019-06-25 08:28:02

by Guido Günther

Subject: [PATCH 1/2] arm64: dts: imx8mq: Add MIPI D-PHY

Add a node for the Mixel MIPI D-PHY, "disabled" by default.

Signed-off-by: Guido Günther <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index d09b808eff87..891ee7578c2d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -728,6 +728,19 @@
status = "disabled";
};

+ dphy: dphy@30a00300 {
+ compatible = "fsl,imx8mq-mipi-dphy";
+ reg = <0x30a00300 0x100>;
+ clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
+ clock-names = "phy_ref";
+ assigned-clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
+ assigned-clock-parents = <&clk IMX8MQ_VIDEO_PLL1_OUT>;
+ assigned-clock-rates = <24000000>;
+ #phy-cells = <0>;
+ power-domains = <&pgc_mipi>;
+ status = "disabled";
+ };
+
i2c1: i2c@30a20000 {
compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
reg = <0x30a20000 0x10000>;
--
2.20.1

2019-06-28 14:43:42

by Angus Ainslie

Subject: Re: [PATCH 1/2] arm64: dts: imx8mq: Add MIPI D-PHY

On 2019-06-25 02:27, Guido Günther wrote:
> Add a node for the Mixel MIPI D-PHY, "disabled" by default.
>
> Signed-off-by: Guido Günther <[email protected]>

Acked-by: Angus Ainslie (Purism) <[email protected]>

> ---
> arch/arm64/boot/dts/freescale/imx8mq.dtsi | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index d09b808eff87..891ee7578c2d 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -728,6 +728,19 @@
> status = "disabled";
> };
>
> + dphy: dphy@30a00300 {
> + compatible = "fsl,imx8mq-mipi-dphy";
> + reg = <0x30a00300 0x100>;
> + clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
> + clock-names = "phy_ref";
> + assigned-clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
> + assigned-clock-parents = <&clk IMX8MQ_VIDEO_PLL1_OUT>;
> + assigned-clock-rates = <24000000>;
> + #phy-cells = <0>;
> + power-domains = <&pgc_mipi>;
> + status = "disabled";
> + };
> +
> i2c1: i2c@30a20000 {
> compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
> reg = <0x30a20000 0x10000>;