2021-09-25 20:16:38

by Nishanth Menon

Subject: [PATCH V2 4/4] arm64: dts: ti: k3-j7200-common-proc-board: Add j7200-evm compatible

Add j7200-evm compatible to the board to allow the board to distinguish
itself from other platforms that may be added in the future.

Signed-off-by: Nishanth Menon <[email protected]>
---

Changes in V2:
* no change

V1: https://lore.kernel.org/all/[email protected]/

arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 3 +++
1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index d14f3c18b65f..121975dc8239 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -12,6 +12,9 @@
#include <dt-bindings/phy/phy.h>

/ {
+ compatible = "ti,j7200-evm", "ti,j7200";
+ model = "Texas Instruments J7200 EVM";
+
chosen {
stdout-path = "serial2:115200n8";
bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
--
2.32.0

2021-09-27 14:30:49

by Suman Anna

Subject: Re: [PATCH V2 4/4] arm64: dts: ti: k3-j7200-common-proc-board: Add j7200-evm compatible

On 9/25/21 3:14 PM, Nishanth Menon wrote:
> Add j7200-evm compatible to the board to allow the board to distinguish
> itself from other platforms that may be added in the future.
>
> Signed-off-by: Nishanth Menon <[email protected]>

Acked-by: Suman Anna <[email protected]>

> ---
>
> Changes in V2:
> * no change
>
> V1: https://lore.kernel.org/all/[email protected]/
>
> arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
> index d14f3c18b65f..121975dc8239 100644
> --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
> @@ -12,6 +12,9 @@
> #include <dt-bindings/phy/phy.h>
>
> / {
> + compatible = "ti,j7200-evm", "ti,j7200";
> + model = "Texas Instruments J7200 EVM";
> +
> chosen {
> stdout-path = "serial2:115200n8";
> bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
>