Hi!
> >> v4.10 works quite nicely on N900, but I still have problems with
> >> audio. Even GSM calls would be usable, if I had reasonable volume on
> >> microphone and speaker... but I don't.
> >>
> >> Both speaker and microphone are too quiet. I can get louder output by
> >> plugging headset -- good. I can hear the other side nicely, but am
> >> too quiet for them. Unfortunately, even if I plug in wired headset,
> >> internal microphone is still used.
> >>
> For me these settings provide reasonable playback and capture volumes
> using v4.10.1:
>
> amixer -D hw:0 set PCM 100%
> amixer -D hw:0 set 'Line DAC' 80% on
> amixer -D hw:0 set 'Line' on
> amixer -D hw:0 set 'Left Line Mixer DACL1' on
> amixer -D hw:0 set 'Right Line Mixer DACR1' on
> amixer -D hw:0 set 'Jack Function' 'Headphone'
> amixer -D hw:0 set 'TPA6130A2 Headphone' 80%
>
> amixer -D hw:0 set 'Jack Function' 'Headset'
> amixer -D hw:0 set 'AGC' off
> amixer -D hw:0 set 'Input Select' 'ADC'
> amixer -D hw:0 set 'Left PGA Mixer Line1L' on
> amixer -D hw:0 set 'Left Line1L Mux' 'differential'
> amixer -D hw:0 set 'Right PGA Mixer Line1L' on
> amixer -D hw:0 set 'Right Line1L Mux' 'differential'
> amixer -D hw:0 set 'ADC HPF Cut-off' '0.0045xFs' 'disabled'
> amixer -D hw:0 set PGA 50% on
> amixer -D hw:0 cset iface=MIXER,name='PGA Capture Switch',index=0 on
This seems to correspond to volumes I have had before. They are enough
for phone call in quiet environment, but not really for normal usage.
Do you have settings where microphone on wired headset works?
Thanks,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
On 03/02/17 16:28, Pavel Machek wrote:
> Hi!
>
>>>> v4.10 works quite nicely on N900, but I still have problems with
>>>> audio. Even GSM calls would be usable, if I had reasonable volume on
>>>> microphone and speaker... but I don't.
>>>>
>>>> Both speaker and microphone are too quiet. I can get louder output by
>>>> plugging headset -- good. I can hear the other side nicely, but am
>>>> too quiet for them. Unfortunately, even if I plug in wired headset,
>>>> internal microphone is still used.
>>>>
>> For me these settings provide reasonable playback and capture volumes
>> using v4.10.1:
>>
>> amixer -D hw:0 set PCM 100%
>> amixer -D hw:0 set 'Line DAC' 80% on
>> amixer -D hw:0 set 'Line' on
>> amixer -D hw:0 set 'Left Line Mixer DACL1' on
>> amixer -D hw:0 set 'Right Line Mixer DACR1' on
>> amixer -D hw:0 set 'Jack Function' 'Headphone'
>> amixer -D hw:0 set 'TPA6130A2 Headphone' 80%
>>
>> amixer -D hw:0 set 'Jack Function' 'Headset'
>> amixer -D hw:0 set 'AGC' off
>> amixer -D hw:0 set 'Input Select' 'ADC'
>> amixer -D hw:0 set 'Left PGA Mixer Line1L' on
>> amixer -D hw:0 set 'Left Line1L Mux' 'differential'
>> amixer -D hw:0 set 'Right PGA Mixer Line1L' on
>> amixer -D hw:0 set 'Right Line1L Mux' 'differential'
>> amixer -D hw:0 set 'ADC HPF Cut-off' '0.0045xFs' 'disabled'
>> amixer -D hw:0 set PGA 50% on
>> amixer -D hw:0 cset iface=MIXER,name='PGA Capture Switch',index=0 on
>
> This seems to correspond to volumes I have had before. They are enough
> for phone call in quiet environment, but not really for normal usage.
>
> Do you have settings where microphone on wired headset works?
>
Those settings above. They are set after putting all volumes to 0 and
muted. I'm using the Nokia WH-205 headset that came with the phone.
--
Jarkko
Hi!
> >>>> v4.10 works quite nicely on N900, but I still have problems with
> >>>> audio. Even GSM calls would be usable, if I had reasonable volume on
> >>>> microphone and speaker... but I don't.
> >>>>
> >>>> Both speaker and microphone are too quiet. I can get louder output by
> >>>> plugging headset -- good. I can hear the other side nicely, but am
> >>>> too quiet for them. Unfortunately, even if I plug in wired headset,
> >>>> internal microphone is still used.
> >>>>
> >> For me these settings provide reasonable playback and capture volumes
> >> using v4.10.1:
> >>
> >> amixer -D hw:0 set PCM 100%
> >> amixer -D hw:0 set 'Line DAC' 80% on
> >> amixer -D hw:0 set 'Line' on
> >> amixer -D hw:0 set 'Left Line Mixer DACL1' on
> >> amixer -D hw:0 set 'Right Line Mixer DACR1' on
> >> amixer -D hw:0 set 'Jack Function' 'Headphone'
> >> amixer -D hw:0 set 'TPA6130A2 Headphone' 80%
> >>
> >> amixer -D hw:0 set 'Jack Function' 'Headset'
> >> amixer -D hw:0 set 'AGC' off
> >> amixer -D hw:0 set 'Input Select' 'ADC'
> >> amixer -D hw:0 set 'Left PGA Mixer Line1L' on
> >> amixer -D hw:0 set 'Left Line1L Mux' 'differential'
> >> amixer -D hw:0 set 'Right PGA Mixer Line1L' on
> >> amixer -D hw:0 set 'Right Line1L Mux' 'differential'
> >> amixer -D hw:0 set 'ADC HPF Cut-off' '0.0045xFs' 'disabled'
> >> amixer -D hw:0 set PGA 50% on
> >> amixer -D hw:0 cset iface=MIXER,name='PGA Capture Switch',index=0 on
> >
> > This seems to correspond to volumes I have had before. They are enough
> > for phone call in quiet environment, but not really for normal usage.
> >
> > Do you have settings where microphone on wired headset works?
> >
> Those settings above. They are set after putting all volumes to 0 and
> muted. I'm using the Nokia WH-205 headset that came with the phone.
I just wanted to say thank you. I finally got to testing those
settings again, and this time headset microphone definitely works.
Loopback using arecord | aplay now produces reasonable volume of
audio. (Unfortunately, I still have some problems somewhere in the
audio<->GSM path :-( ).
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html