This patch series introduces a new tuning algorithm for
mmc. The new algorithm should be used when delay chain is
enabled. The ITAPDLY is selected from the largest passing
window and the buffer is not viewed as a circular buffer.
The new tuning algorithm is implemented as per the paper
published here [0] and has been tested on the following
platforms: AM62x SK, AM62A SK, AM62p SK, AM64x SK, and AM64x
EVM.
The series also includes a few fixes in the sdhci_am654
driver on OTAPDLYEN/ITAPDLYEN and ITAPDELSEL.
Changelog:
v2->v3:
- Remove fixes tags when not needed
- Fix return for tuning algorithm
- Fix ITAPDLY_LAST_INDEX
- Use reverse fir tree order for variable declarations
- Save all ITAPDLYENA changes in itap_del_ena[]
- Remove unnecessary parenthesis
- Remove unnecessary variables
- Save itapdlyena for HS400 timing
v1->v2:
- Remove unnecessary indentations and if/else in
sdhci_am654_calculate_itap
- Optimize sdhci_am654_calculate_itap()
- Call sdhci_am654_write_itapdly() in sdhci_am654_set_clock()
instead of sdhci_am654_setup_dll()
- Change otap_del_sel[], itap_del_sel[], and itap_del_ena[]
to type u32
- Revert unnecessary reformating in sdhci_am654_set_clock()
and sdhci_j721e_4bit_set_clock()
Judith Mendez (7):
mmc: sdhci_am654: Add tuning algorithm for delay chain
mmc: sdhci_am654: Write ITAPDLY for DDR52 timing
mmc: sdhci_am654: Add OTAP/ITAP delay enable
mmc: sdhci_am654: Fix itapdly/otapdly array type
mmc: sdhci_am654: Update comments in sdhci_am654_set_clock
mmc: sdhci_am654: Add ITAPDLYSEL in sdhci_j721e_4bit_set_clock
mmc: sdhci_am654: Fix ITAPDLY for HS400 timing
drivers/mmc/host/sdhci_am654.c | 176 ++++++++++++++++++++++++++-------
1 file changed, 138 insertions(+), 38 deletions(-)
base-commit: faf3b8014c357d71c7a9414302e217a1dd1679af
--
2.43.2
While STRB is currently used for DATA and CRC responses, the CMD
responses from the device to the host still require ITAPDLY for
HS400 timing.
Currently what is stored for HS400 is the ITAPDLY from High Speed
mode which is incorrect. The ITAPDLY for HS400 speed mode should
be the same as ITAPDLY as HS200 timing after tuning is executed.
Add the functionality to save ITAPDLY from HS200 tuning and save
as HS400 ITAPDLY.
Fixes: a161c45f2979 ("mmc: sdhci_am654: Enable DLL only for some speed modes")
Signed-off-by: Judith Mendez <[email protected]>
---
Changelog:
v2->v3:
- Remove unnecessary variables
- Save itapdlyena for HS400 timing
---
drivers/mmc/host/sdhci_am654.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c
index a4eeaf894806..7e73ef897cd9 100644
--- a/drivers/mmc/host/sdhci_am654.c
+++ b/drivers/mmc/host/sdhci_am654.c
@@ -301,6 +301,12 @@ static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock)
if (timing > MMC_TIMING_UHS_SDR25 && clock >= CLOCK_TOO_SLOW_HZ) {
sdhci_am654_setup_dll(host, clock);
sdhci_am654->dll_enable = true;
+
+ if (timing == MMC_TIMING_MMC_HS400) {
+ sdhci_am654->itap_del_ena[timing] = 0x1;
+ sdhci_am654->itap_del_sel[timing] = sdhci_am654->itap_del_sel[timing - 1];
+ }
+
sdhci_am654_write_itapdly(sdhci_am654, sdhci_am654->itap_del_sel[timing],
sdhci_am654->itap_del_ena[timing]);
} else {
@@ -531,6 +537,9 @@ static int sdhci_am654_platform_execute_tuning(struct sdhci_host *host,
sdhci_am654_write_itapdly(sdhci_am654, itap, sdhci_am654->itap_del_ena[timing]);
+ /* Save ITAPDLY */
+ sdhci_am654->itap_del_sel[timing] = itap;
+
return 0;
}
--
2.43.2
Currently the OTAP/ITAP delay enable functionality is incorrect in
the am654_set_clock function. The OTAP delay is not enabled when
timing < SDR25 bus speed mode. The ITAP delay is not enabled for
timings that do not carry out tuning.
Add this OTAP/ITAP delay functionality according to the datasheet
[1] OTAPDLYENA and ITAPDLYENA for MMC0.
[1] https://www.ti.com/lit/ds/symlink/am62p.pdf
Fixes: 8ee5fc0e0b3b ("mmc: sdhci_am654: Update OTAPDLY writes")
Signed-off-by: Judith Mendez <[email protected]>
---
Changelog:
v2->v3:
- Save all ITAPDLYENA changes in itap_del_ena[]
---
drivers/mmc/host/sdhci_am654.c | 40 ++++++++++++++++++++++------------
1 file changed, 26 insertions(+), 14 deletions(-)
diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c
index 896d4660b535..e7ff6b841c4d 100644
--- a/drivers/mmc/host/sdhci_am654.c
+++ b/drivers/mmc/host/sdhci_am654.c
@@ -143,6 +143,7 @@ struct sdhci_am654_data {
struct regmap *base;
int otap_del_sel[ARRAY_SIZE(td)];
int itap_del_sel[ARRAY_SIZE(td)];
+ u32 itap_del_ena[ARRAY_SIZE(td)];
int clkbuf_sel;
int trm_icp;
int drv_strength;
@@ -239,11 +240,13 @@ static void sdhci_am654_setup_dll(struct sdhci_host *host, unsigned int clock)
}
static void sdhci_am654_write_itapdly(struct sdhci_am654_data *sdhci_am654,
- u32 itapdly)
+ u32 itapdly, u32 enable)
{
/* Set ITAPCHGWIN before writing to ITAPDLY */
regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPCHGWIN_MASK,
1 << ITAPCHGWIN_SHIFT);
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPDLYENA_MASK,
+ enable << ITAPDLYENA_SHIFT);
regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPDLYSEL_MASK,
itapdly << ITAPDLYSEL_SHIFT);
regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPCHGWIN_MASK, 0);
@@ -260,8 +263,8 @@ static void sdhci_am654_setup_delay_chain(struct sdhci_am654_data *sdhci_am654,
mask = SELDLYTXCLK_MASK | SELDLYRXCLK_MASK;
regmap_update_bits(sdhci_am654->base, PHY_CTRL5, mask, val);
- sdhci_am654_write_itapdly(sdhci_am654,
- sdhci_am654->itap_del_sel[timing]);
+ sdhci_am654_write_itapdly(sdhci_am654, sdhci_am654->itap_del_sel[timing],
+ sdhci_am654->itap_del_ena[timing]);
}
static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock)
@@ -270,7 +273,6 @@ static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock)
struct sdhci_am654_data *sdhci_am654 = sdhci_pltfm_priv(pltfm_host);
unsigned char timing = host->mmc->ios.timing;
u32 otap_del_sel;
- u32 otap_del_ena;
u32 mask, val;
regmap_update_bits(sdhci_am654->base, PHY_CTRL1, ENDLL_MASK, 0);
@@ -279,10 +281,9 @@ static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock)
/* Setup DLL Output TAP delay */
otap_del_sel = sdhci_am654->otap_del_sel[timing];
- otap_del_ena = (timing > MMC_TIMING_UHS_SDR25) ? 1 : 0;
mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK;
- val = (otap_del_ena << OTAPDLYENA_SHIFT) |
+ val = (0x1 << OTAPDLYENA_SHIFT) |
(otap_del_sel << OTAPDLYSEL_SHIFT);
/* Write to STRBSEL for HS400 speed mode */
@@ -300,7 +301,8 @@ static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock)
if (timing > MMC_TIMING_UHS_SDR25 && clock >= CLOCK_TOO_SLOW_HZ) {
sdhci_am654_setup_dll(host, clock);
sdhci_am654->dll_enable = true;
- sdhci_am654_write_itapdly(sdhci_am654, sdhci_am654->itap_del_sel[timing]);
+ sdhci_am654_write_itapdly(sdhci_am654, sdhci_am654->itap_del_sel[timing],
+ sdhci_am654->itap_del_ena[timing]);
} else {
sdhci_am654_setup_delay_chain(sdhci_am654, timing);
}
@@ -316,6 +318,7 @@ static void sdhci_j721e_4bit_set_clock(struct sdhci_host *host,
struct sdhci_am654_data *sdhci_am654 = sdhci_pltfm_priv(pltfm_host);
unsigned char timing = host->mmc->ios.timing;
u32 otap_del_sel;
+ u32 itap_del_ena;
u32 mask, val;
/* Setup DLL Output TAP delay */
@@ -324,6 +327,12 @@ static void sdhci_j721e_4bit_set_clock(struct sdhci_host *host,
mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK;
val = (0x1 << OTAPDLYENA_SHIFT) |
(otap_del_sel << OTAPDLYSEL_SHIFT);
+
+ itap_del_ena = sdhci_am654->itap_del_ena[timing];
+
+ mask |= ITAPDLYENA_MASK;
+ val |= (itap_del_ena << ITAPDLYENA_SHIFT);
+
regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, val);
regmap_update_bits(sdhci_am654->base, PHY_CTRL5, CLKBUFSEL_MASK,
@@ -478,6 +487,7 @@ static int sdhci_am654_platform_execute_tuning(struct sdhci_host *host,
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_am654_data *sdhci_am654 = sdhci_pltfm_priv(pltfm_host);
+ unsigned char timing = host->mmc->ios.timing;
struct window fail_window[ITAPDLY_LENGTH];
u8 curr_pass, itap;
u8 fail_index = 0;
@@ -486,11 +496,10 @@ static int sdhci_am654_platform_execute_tuning(struct sdhci_host *host,
memset(fail_window, 0, sizeof(fail_window));
/* Enable ITAPDLY */
- regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPDLYENA_MASK,
- 1 << ITAPDLYENA_SHIFT);
+ sdhci_am654->itap_del_ena[timing] = 0x1;
for (itap = 0; itap < ITAPDLY_LENGTH; itap++) {
- sdhci_am654_write_itapdly(sdhci_am654, itap);
+ sdhci_am654_write_itapdly(sdhci_am654, itap, sdhci_am654->itap_del_ena[timing]);
curr_pass = !mmc_send_tuning(host->mmc, opcode, NULL);
@@ -514,7 +523,7 @@ static int sdhci_am654_platform_execute_tuning(struct sdhci_host *host,
itap = sdhci_am654_calculate_itap(host, fail_window, fail_index,
sdhci_am654->dll_enable);
- sdhci_am654_write_itapdly(sdhci_am654, itap);
+ sdhci_am654_write_itapdly(sdhci_am654, itap, sdhci_am654->itap_del_ena[timing]);
return 0;
}
@@ -663,9 +672,12 @@ static int sdhci_am654_get_otap_delay(struct sdhci_host *host,
host->mmc->caps2 &= ~td[i].capability;
}
- if (td[i].itap_binding)
- device_property_read_u32(dev, td[i].itap_binding,
- &sdhci_am654->itap_del_sel[i]);
+ if (td[i].itap_binding) {
+ ret = device_property_read_u32(dev, td[i].itap_binding,
+ &sdhci_am654->itap_del_sel[i]);
+ if (!ret)
+ sdhci_am654->itap_del_ena[i] = 0x1;
+ }
}
return 0;
--
2.43.2
Currently the sdhci_am654 driver only supports one tuning
algorithm which should be used only when DLL is enabled. The
ITAPDLY is selected from the largest passing window and the
buffer is viewed as a circular buffer.
The new algorithm should be used when the delay chain
is enabled. The ITAPDLY is selected from the largest passing
window and the buffer is not viewed as a circular buffer.
This implementation is based off of the following paper: [1].
Also add support for multiple failing windows.
[1] https://www.ti.com/lit/an/spract9/spract9.pdf
Fixes: 13ebeae68ac9 ("mmc: sdhci_am654: Add support for software tuning")
Signed-off-by: Judith Mendez <[email protected]>
---
Changelog:
v2->v3:
- Fix return for tuning algorithm
- Fix ITAPDLY_LAST_INDEX
- Use reverse fir tree order for variable declarations
- Remove unnecessary parenthesis
---
drivers/mmc/host/sdhci_am654.c | 112 +++++++++++++++++++++++++++------
1 file changed, 92 insertions(+), 20 deletions(-)
diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c
index d659c59422e1..d11b0d769e6c 100644
--- a/drivers/mmc/host/sdhci_am654.c
+++ b/drivers/mmc/host/sdhci_am654.c
@@ -149,10 +149,17 @@ struct sdhci_am654_data {
int strb_sel;
u32 flags;
u32 quirks;
+ bool dll_enable;
#define SDHCI_AM654_QUIRK_FORCE_CDTEST BIT(0)
};
+struct window {
+ u8 start;
+ u8 end;
+ u8 length;
+};
+
struct sdhci_am654_driver_data {
const struct sdhci_pltfm_data *pdata;
u32 flags;
@@ -290,10 +297,12 @@ static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock)
regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, val);
- if (timing > MMC_TIMING_UHS_SDR25 && clock >= CLOCK_TOO_SLOW_HZ)
+ if (timing > MMC_TIMING_UHS_SDR25 && clock >= CLOCK_TOO_SLOW_HZ) {
sdhci_am654_setup_dll(host, clock);
- else
+ sdhci_am654->dll_enable = true;
+ } else {
sdhci_am654_setup_delay_chain(sdhci_am654, timing);
+ }
regmap_update_bits(sdhci_am654->base, PHY_CTRL5, CLKBUFSEL_MASK,
sdhci_am654->clkbuf_sel);
@@ -408,39 +417,102 @@ static u32 sdhci_am654_cqhci_irq(struct sdhci_host *host, u32 intmask)
return 0;
}
-#define ITAP_MAX 32
+#define ITAPDLY_LENGTH 32
+#define ITAPDLY_LAST_INDEX (ITAPDLY_LENGTH - 1)
+
+static u32 sdhci_am654_calculate_itap(struct sdhci_host *host, struct window
+ *fail_window, u8 num_fails, bool circular_buffer)
+{
+ u8 itap = 0, start_fail = 0, end_fail = 0, pass_length = 0;
+ u8 first_fail_start = 0, last_fail_end = 0;
+ struct device *dev = mmc_dev(host->mmc);
+ struct window pass_window = {0, 0, 0};
+ int prev_fail_end = -1;
+
+ u8 i;
+
+ if (!num_fails)
+ return ITAPDLY_LAST_INDEX >> 1;
+
+ if (fail_window->length == ITAPDLY_LENGTH) {
+ dev_err(dev, "No passing ITAPDLY, return 0\n");
+ return 0;
+ }
+
+ first_fail_start = fail_window->start;
+ last_fail_end = fail_window[num_fails - 1].end;
+
+ for (i = 0; i < num_fails; i++) {
+ start_fail = fail_window[i].start;
+ end_fail = fail_window[i].end;
+ pass_length = start_fail - (prev_fail_end + 1);
+
+ if (pass_length > pass_window.length) {
+ pass_window.start = prev_fail_end + 1;
+ pass_window.length = pass_length;
+ }
+ prev_fail_end = end_fail;
+ }
+
+ if (!circular_buffer)
+ pass_length = ITAPDLY_LAST_INDEX - last_fail_end;
+ else
+ pass_length = ITAPDLY_LAST_INDEX - last_fail_end + first_fail_start;
+
+ if (pass_length > pass_window.length) {
+ pass_window.start = last_fail_end + 1;
+ pass_window.length = pass_length;
+ }
+
+ if (!circular_buffer)
+ itap = pass_window.start + (pass_window.length >> 1);
+ else
+ itap = (pass_window.start + (pass_window.length >> 1)) % ITAPDLY_LENGTH;
+
+ return (itap > ITAPDLY_LAST_INDEX) ? ITAPDLY_LAST_INDEX >> 1 : itap;
+}
+
static int sdhci_am654_platform_execute_tuning(struct sdhci_host *host,
u32 opcode)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_am654_data *sdhci_am654 = sdhci_pltfm_priv(pltfm_host);
- int cur_val, prev_val = 1, fail_len = 0, pass_window = 0, pass_len;
- u32 itap;
+ struct window fail_window[ITAPDLY_LENGTH];
+ u8 curr_pass, itap;
+ u8 fail_index = 0;
+ u8 prev_pass = 1;
+
+ memset(fail_window, 0, sizeof(fail_window));
/* Enable ITAPDLY */
regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPDLYENA_MASK,
1 << ITAPDLYENA_SHIFT);
- for (itap = 0; itap < ITAP_MAX; itap++) {
+ for (itap = 0; itap < ITAPDLY_LENGTH; itap++) {
sdhci_am654_write_itapdly(sdhci_am654, itap);
- cur_val = !mmc_send_tuning(host->mmc, opcode, NULL);
- if (cur_val && !prev_val)
- pass_window = itap;
+ curr_pass = !mmc_send_tuning(host->mmc, opcode, NULL);
- if (!cur_val)
- fail_len++;
+ if (!curr_pass && prev_pass)
+ fail_window[fail_index].start = itap;
- prev_val = cur_val;
+ if (!curr_pass) {
+ fail_window[fail_index].end = itap;
+ fail_window[fail_index].length++;
+ }
+
+ if (curr_pass && !prev_pass)
+ fail_index++;
+
+ prev_pass = curr_pass;
}
- /*
- * Having determined the length of the failing window and start of
- * the passing window calculate the length of the passing window and
- * set the final value halfway through it considering the range as a
- * circular buffer
- */
- pass_len = ITAP_MAX - fail_len;
- itap = (pass_window + (pass_len >> 1)) % ITAP_MAX;
+
+ if (fail_window[fail_index].length != 0)
+ fail_index++;
+
+ itap = sdhci_am654_calculate_itap(host, fail_window, fail_index,
+ sdhci_am654->dll_enable);
+
sdhci_am654_write_itapdly(sdhci_am654, itap);
return 0;
--
2.43.2
On 8/03/24 02:57, Judith Mendez wrote:
> Currently the sdhci_am654 driver only supports one tuning
> algorithm which should be used only when DLL is enabled. The
> ITAPDLY is selected from the largest passing window and the
> buffer is viewed as a circular buffer.
>
> The new algorithm should be used when the delay chain
> is enabled. The ITAPDLY is selected from the largest passing
> window and the buffer is not viewed as a circular buffer.
>
> This implementation is based off of the following paper: [1].
>
> Also add support for multiple failing windows.
>
> [1] https://www.ti.com/lit/an/spract9/spract9.pdf
>
> Fixes: 13ebeae68ac9 ("mmc: sdhci_am654: Add support for software tuning")
> Signed-off-by: Judith Mendez <[email protected]>
One question further below, and one cosmetic change, but resolve
those and you may add to all patches in this patch set:
Acked-by: Adrian Hunter <[email protected]>
> ---
> Changelog:
> v2->v3:
> - Fix return for tuning algorithm
> - Fix ITAPDLY_LAST_INDEX
> - Use reverse fir tree order for variable declarations
> - Remove unnecessary parenthesis
> ---
> drivers/mmc/host/sdhci_am654.c | 112 +++++++++++++++++++++++++++------
> 1 file changed, 92 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c
> index d659c59422e1..d11b0d769e6c 100644
> --- a/drivers/mmc/host/sdhci_am654.c
> +++ b/drivers/mmc/host/sdhci_am654.c
> @@ -149,10 +149,17 @@ struct sdhci_am654_data {
> int strb_sel;
> u32 flags;
> u32 quirks;
> + bool dll_enable;
>
> #define SDHCI_AM654_QUIRK_FORCE_CDTEST BIT(0)
> };
>
> +struct window {
> + u8 start;
> + u8 end;
> + u8 length;
> +};
> +
> struct sdhci_am654_driver_data {
> const struct sdhci_pltfm_data *pdata;
> u32 flags;
> @@ -290,10 +297,12 @@ static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock)
>
> regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, val);
>
> - if (timing > MMC_TIMING_UHS_SDR25 && clock >= CLOCK_TOO_SLOW_HZ)
> + if (timing > MMC_TIMING_UHS_SDR25 && clock >= CLOCK_TOO_SLOW_HZ) {
> sdhci_am654_setup_dll(host, clock);
> - else
> + sdhci_am654->dll_enable = true;
> + } else {
> sdhci_am654_setup_delay_chain(sdhci_am654, timing);
V2 patch had here:
sdhci_am654->dll_enable = false;
Was its removal intended?
> + }
>
> regmap_update_bits(sdhci_am654->base, PHY_CTRL5, CLKBUFSEL_MASK,
> sdhci_am654->clkbuf_sel);
> @@ -408,39 +417,102 @@ static u32 sdhci_am654_cqhci_irq(struct sdhci_host *host, u32 intmask)
> return 0;
> }
>
> -#define ITAP_MAX 32
> +#define ITAPDLY_LENGTH 32
> +#define ITAPDLY_LAST_INDEX (ITAPDLY_LENGTH - 1)
> +
> +static u32 sdhci_am654_calculate_itap(struct sdhci_host *host, struct window
> + *fail_window, u8 num_fails, bool circular_buffer)
> +{
> + u8 itap = 0, start_fail = 0, end_fail = 0, pass_length = 0;
> + u8 first_fail_start = 0, last_fail_end = 0;
> + struct device *dev = mmc_dev(host->mmc);
> + struct window pass_window = {0, 0, 0};
> + int prev_fail_end = -1;
> +
Unnecessary blank line
> + u8 i;
> +
> + if (!num_fails)
> + return ITAPDLY_LAST_INDEX >> 1;
> +
> + if (fail_window->length == ITAPDLY_LENGTH) {
> + dev_err(dev, "No passing ITAPDLY, return 0\n");
> + return 0;
> + }
> +
> + first_fail_start = fail_window->start;
> + last_fail_end = fail_window[num_fails - 1].end;
> +
> + for (i = 0; i < num_fails; i++) {
> + start_fail = fail_window[i].start;
> + end_fail = fail_window[i].end;
> + pass_length = start_fail - (prev_fail_end + 1);
> +
> + if (pass_length > pass_window.length) {
> + pass_window.start = prev_fail_end + 1;
> + pass_window.length = pass_length;
> + }
> + prev_fail_end = end_fail;
> + }
> +
> + if (!circular_buffer)
> + pass_length = ITAPDLY_LAST_INDEX - last_fail_end;
> + else
> + pass_length = ITAPDLY_LAST_INDEX - last_fail_end + first_fail_start;
> +
> + if (pass_length > pass_window.length) {
> + pass_window.start = last_fail_end + 1;
> + pass_window.length = pass_length;
> + }
> +
> + if (!circular_buffer)
> + itap = pass_window.start + (pass_window.length >> 1);
> + else
> + itap = (pass_window.start + (pass_window.length >> 1)) % ITAPDLY_LENGTH;
> +
> + return (itap > ITAPDLY_LAST_INDEX) ? ITAPDLY_LAST_INDEX >> 1 : itap;
> +}
> +
> static int sdhci_am654_platform_execute_tuning(struct sdhci_host *host,
> u32 opcode)
> {
> struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> struct sdhci_am654_data *sdhci_am654 = sdhci_pltfm_priv(pltfm_host);
> - int cur_val, prev_val = 1, fail_len = 0, pass_window = 0, pass_len;
> - u32 itap;
> + struct window fail_window[ITAPDLY_LENGTH];
> + u8 curr_pass, itap;
> + u8 fail_index = 0;
> + u8 prev_pass = 1;
> +
> + memset(fail_window, 0, sizeof(fail_window));
>
> /* Enable ITAPDLY */
> regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPDLYENA_MASK,
> 1 << ITAPDLYENA_SHIFT);
>
> - for (itap = 0; itap < ITAP_MAX; itap++) {
> + for (itap = 0; itap < ITAPDLY_LENGTH; itap++) {
> sdhci_am654_write_itapdly(sdhci_am654, itap);
>
> - cur_val = !mmc_send_tuning(host->mmc, opcode, NULL);
> - if (cur_val && !prev_val)
> - pass_window = itap;
> + curr_pass = !mmc_send_tuning(host->mmc, opcode, NULL);
>
> - if (!cur_val)
> - fail_len++;
> + if (!curr_pass && prev_pass)
> + fail_window[fail_index].start = itap;
>
> - prev_val = cur_val;
> + if (!curr_pass) {
> + fail_window[fail_index].end = itap;
> + fail_window[fail_index].length++;
> + }
> +
> + if (curr_pass && !prev_pass)
> + fail_index++;
> +
> + prev_pass = curr_pass;
> }
> - /*
> - * Having determined the length of the failing window and start of
> - * the passing window calculate the length of the passing window and
> - * set the final value halfway through it considering the range as a
> - * circular buffer
> - */
> - pass_len = ITAP_MAX - fail_len;
> - itap = (pass_window + (pass_len >> 1)) % ITAP_MAX;
> +
> + if (fail_window[fail_index].length != 0)
> + fail_index++;
> +
> + itap = sdhci_am654_calculate_itap(host, fail_window, fail_index,
> + sdhci_am654->dll_enable);
> +
> sdhci_am654_write_itapdly(sdhci_am654, itap);
>
> return 0;
Hi Adrian,
On 3/14/24 9:18 AM, Adrian Hunter wrote:
> On 8/03/24 02:57, Judith Mendez wrote:
>> Currently the sdhci_am654 driver only supports one tuning
>> algorithm which should be used only when DLL is enabled. The
>> ITAPDLY is selected from the largest passing window and the
>> buffer is viewed as a circular buffer.
>>
>> The new algorithm should be used when the delay chain
>> is enabled. The ITAPDLY is selected from the largest passing
>> window and the buffer is not viewed as a circular buffer.
>>
>> This implementation is based off of the following paper: [1].
>>
>> Also add support for multiple failing windows.
>>
>> [1] https://www.ti.com/lit/an/spract9/spract9.pdf
>>
>> Fixes: 13ebeae68ac9 ("mmc: sdhci_am654: Add support for software tuning")
>> Signed-off-by: Judith Mendez <[email protected]>
>
> One question further below, and one cosmetic change, but resolve
> those and you may add to all patches in this patch set:
Appreciate your review, thanks.
>
> Acked-by: Adrian Hunter <[email protected]>
>
>> ---
>> Changelog:
>> v2->v3:
>> - Fix return for tuning algorithm
>> - Fix ITAPDLY_LAST_INDEX
>> - Use reverse fir tree order for variable declarations
>> - Remove unnecessary parenthesis
>> ---
>> drivers/mmc/host/sdhci_am654.c | 112 +++++++++++++++++++++++++++------
>> 1 file changed, 92 insertions(+), 20 deletions(-)
>>
>> diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c
>> index d659c59422e1..d11b0d769e6c 100644
>> --- a/drivers/mmc/host/sdhci_am654.c
>> +++ b/drivers/mmc/host/sdhci_am654.c
>> @@ -149,10 +149,17 @@ struct sdhci_am654_data {
>> int strb_sel;
>> u32 flags;
>> u32 quirks;
>> + bool dll_enable;
>>
>> #define SDHCI_AM654_QUIRK_FORCE_CDTEST BIT(0)
>> };
>>
>> +struct window {
>> + u8 start;
>> + u8 end;
>> + u8 length;
>> +};
>> +
>> struct sdhci_am654_driver_data {
>> const struct sdhci_pltfm_data *pdata;
>> u32 flags;
>> @@ -290,10 +297,12 @@ static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock)
>>
>> regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, val);
>>
>> - if (timing > MMC_TIMING_UHS_SDR25 && clock >= CLOCK_TOO_SLOW_HZ)
>> + if (timing > MMC_TIMING_UHS_SDR25 && clock >= CLOCK_TOO_SLOW_HZ) {
>> sdhci_am654_setup_dll(host, clock);
>> - else
>> + sdhci_am654->dll_enable = true;
>> + } else {
>> sdhci_am654_setup_delay_chain(sdhci_am654, timing);
>
> V2 patch had here:
>
> sdhci_am654->dll_enable = false;
>
> Was its removal intended?
I did remove on purpose since it did not seem to be necessary.
>
>> + }
>>
>> regmap_update_bits(sdhci_am654->base, PHY_CTRL5, CLKBUFSEL_MASK,
>> sdhci_am654->clkbuf_sel);
>> @@ -408,39 +417,102 @@ static u32 sdhci_am654_cqhci_irq(struct sdhci_host *host, u32 intmask)
>> return 0;
>> }
>>
>> -#define ITAP_MAX 32
>> +#define ITAPDLY_LENGTH 32
>> +#define ITAPDLY_LAST_INDEX (ITAPDLY_LENGTH - 1)
>> +
>> +static u32 sdhci_am654_calculate_itap(struct sdhci_host *host, struct window
>> + *fail_window, u8 num_fails, bool circular_buffer)
>> +{
>> + u8 itap = 0, start_fail = 0, end_fail = 0, pass_length = 0;
>> + u8 first_fail_start = 0, last_fail_end = 0;
>> + struct device *dev = mmc_dev(host->mmc);
>> + struct window pass_window = {0, 0, 0};
>> + int prev_fail_end = -1;
>> +
>
> Unnecessary blank line
Will remove for v4.
>
>> + u8 i;
>> +
>> + if (!num_fails)
>> + return ITAPDLY_LAST_INDEX >> 1;
>> +
>> + if (fail_window->length == ITAPDLY_LENGTH) {
>> + dev_err(dev, "No passing ITAPDLY, return 0\n");
>> + return 0;
>> + }
>> +
>> + first_fail_start = fail_window->start;
>> + last_fail_end = fail_window[num_fails - 1].end;
>> +
>> + for (i = 0; i < num_fails; i++) {
>> + start_fail = fail_window[i].start;
>> + end_fail = fail_window[i].end;
>> + pass_length = start_fail - (prev_fail_end + 1);
>> +
>> + if (pass_length > pass_window.length) {
>> + pass_window.start = prev_fail_end + 1;
>> + pass_window.length = pass_length;
>> + }
>> + prev_fail_end = end_fail;
>> + }
>> +
>> + if (!circular_buffer)
>> + pass_length = ITAPDLY_LAST_INDEX - last_fail_end;
>> + else
>> + pass_length = ITAPDLY_LAST_INDEX - last_fail_end + first_fail_start;
>> +
>> + if (pass_length > pass_window.length) {
>> + pass_window.start = last_fail_end + 1;
>> + pass_window.length = pass_length;
>> + }
>> +
>> + if (!circular_buffer)
>> + itap = pass_window.start + (pass_window.length >> 1);
>> + else
>> + itap = (pass_window.start + (pass_window.length >> 1)) % ITAPDLY_LENGTH;
>> +
>> + return (itap > ITAPDLY_LAST_INDEX) ? ITAPDLY_LAST_INDEX >> 1 : itap;
>> +}
>> +
>> static int sdhci_am654_platform_execute_tuning(struct sdhci_host *host,
>> u32 opcode)
>> {
>> struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>> struct sdhci_am654_data *sdhci_am654 = sdhci_pltfm_priv(pltfm_host);
>> - int cur_val, prev_val = 1, fail_len = 0, pass_window = 0, pass_len;
>> - u32 itap;
>> + struct window fail_window[ITAPDLY_LENGTH];
>> + u8 curr_pass, itap;
>> + u8 fail_index = 0;
>> + u8 prev_pass = 1;
>> +
>> + memset(fail_window, 0, sizeof(fail_window));
>>
>> /* Enable ITAPDLY */
>> regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPDLYENA_MASK,
>> 1 << ITAPDLYENA_SHIFT);
>>
>> - for (itap = 0; itap < ITAP_MAX; itap++) {
>> + for (itap = 0; itap < ITAPDLY_LENGTH; itap++) {
>> sdhci_am654_write_itapdly(sdhci_am654, itap);
>>
>> - cur_val = !mmc_send_tuning(host->mmc, opcode, NULL);
>> - if (cur_val && !prev_val)
>> - pass_window = itap;
>> + curr_pass = !mmc_send_tuning(host->mmc, opcode, NULL);
>>
>> - if (!cur_val)
>> - fail_len++;
>> + if (!curr_pass && prev_pass)
>> + fail_window[fail_index].start = itap;
>>
>> - prev_val = cur_val;
>> + if (!curr_pass) {
>> + fail_window[fail_index].end = itap;
>> + fail_window[fail_index].length++;
>> + }
>> +
>> + if (curr_pass && !prev_pass)
>> + fail_index++;
>> +
>> + prev_pass = curr_pass;
>> }
>> - /*
>> - * Having determined the length of the failing window and start of
>> - * the passing window calculate the length of the passing window and
>> - * set the final value halfway through it considering the range as a
>> - * circular buffer
>> - */
>> - pass_len = ITAP_MAX - fail_len;
>> - itap = (pass_window + (pass_len >> 1)) % ITAP_MAX;
>> +
>> + if (fail_window[fail_index].length != 0)
>> + fail_index++;
>> +
>> + itap = sdhci_am654_calculate_itap(host, fail_window, fail_index,
>> + sdhci_am654->dll_enable);
>> +
>> sdhci_am654_write_itapdly(sdhci_am654, itap);
>>
>> return 0;
>
On 18/03/24 16:04, Judith Mendez wrote:
> On 3/14/24 9:18 AM, Adrian Hunter wrote:
>> On 8/03/24 02:57, Judith Mendez wrote:
>>> @@ -290,10 +297,12 @@ static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock)
>>> regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, val);
>>> - if (timing > MMC_TIMING_UHS_SDR25 && clock >= CLOCK_TOO_SLOW_HZ)
>>> + if (timing > MMC_TIMING_UHS_SDR25 && clock >= CLOCK_TOO_SLOW_HZ) {
>>> sdhci_am654_setup_dll(host, clock);
>>> - else
>>> + sdhci_am654->dll_enable = true;
>>> + } else {
>>> sdhci_am654_setup_delay_chain(sdhci_am654, timing);
>>
>> V2 patch had here:
>>
>> sdhci_am654->dll_enable = false;
>>
>> Was its removal intended?
>
> I did remove on purpose since it did not seem to be necessary.
I suspect it is necessary because ->set_clock() can be called in
when the timing has changed (e.g. recovery resets and reinitializes
the card device, or the card changes etc.) but it seems like
dll_enable would be stuck as always true once it is set to true.
On 3/19/24 1:35 AM, Adrian Hunter wrote:
> On 18/03/24 16:04, Judith Mendez wrote:
>> On 3/14/24 9:18 AM, Adrian Hunter wrote:
>>> On 8/03/24 02:57, Judith Mendez wrote:
>>>> @@ -290,10 +297,12 @@ static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock)
>>>> regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, val);
>>>> - if (timing > MMC_TIMING_UHS_SDR25 && clock >= CLOCK_TOO_SLOW_HZ)
>>>> + if (timing > MMC_TIMING_UHS_SDR25 && clock >= CLOCK_TOO_SLOW_HZ) {
>>>> sdhci_am654_setup_dll(host, clock);
>>>> - else
>>>> + sdhci_am654->dll_enable = true;
>>>> + } else {
>>>> sdhci_am654_setup_delay_chain(sdhci_am654, timing);
>>>
>>> V2 patch had here:
>>>
>>> sdhci_am654->dll_enable = false;
>>>
>>> Was its removal intended?
>>
>> I did remove on purpose since it did not seem to be necessary.
>
> I suspect it is necessary because ->set_clock() can be called in
> when the timing has changed (e.g. recovery resets and reinitializes
> the card device, or the card changes etc.) but it seems like
> dll_enable would be stuck as always true once it is set to true.
>
Thinking about this some more, you are right. Will add back, thanks.
~ Judith