I was running 2.2.18 and everything was working fine. I upgraded to
2.4.3-pre3 and for some unknown reason the kernel will not recognize
one particular CD drive on my SCSI chain. I doubt it's hardware
related because switching to the old kernel resolves the problem.
Furthermore, the other SCSI devices on the chain are recognized by
2.4.3 indicating that the controller is properly compiled and can be
accessed. Dmesg in 2.2.18 shows all three scsi devices, dmesg in 2.4.3
shows all except a Mitsumi CD writer.
Is there a known problem ?
Is it just me ?
Jens
On Mon, 12 Mar 2001 13:19:35 -0800, you wrote:
>I was running 2.2.18 and everything was working fine. I upgraded to
>2.4.3-pre3 and for some unknown reason the kernel will not recognize
>one particular CD drive on my SCSI chain. I doubt it's hardware
>related because switching to the old kernel resolves the problem.
>Furthermore, the other SCSI devices on the chain are recognized by
>2.4.3 indicating that the controller is properly compiled and can be
>accessed. Dmesg in 2.2.18 shows all three scsi devices, dmesg in 2.4.3
>shows all except a Mitsumi CD writer.
>Is there a known problem ?
>Is it just me ?
>
>Jens
Just installed 2.4.3-pre4 .... same problem :(
Jens
>Just installed 2.4.3-pre4 .... same problem :(
It might help to know what controller you are using.
--
Justin
On Tue, 13 Mar 2001 06:51:30 -0700, you wrote:
>>Just installed 2.4.3-pre4 .... same problem :(
>
>It might help to know what controller you are using.
I am using the Adaptec 29160 controller.
Jens