2019-10-19 08:16:55

by Harish Bandi

[permalink] [raw]
Subject: Re: [PATCH 2/4] Bluetooth: hci_qca: Don't vote for specific voltage

On 2019-10-18 10:54, Bjorn Andersson wrote:
> Devices with specific voltage requirements should not request voltage
> from the driver, but instead rely on the system configuration to define
> appropriate voltages for each rail.
>
> This ensures that PMIC and board variations are accounted for,
> something
> that the 0.1V range in the hci_qca driver currently tries to address.
> But on the Lenovo Yoga C630 (with wcn3990) vddch0 is 3.1V, which means
> the driver will fail to set the voltage.
>
> Signed-off-by: Bjorn Andersson <[email protected]>
> ---
> drivers/bluetooth/hci_qca.c | 26 ++++++++------------------
> 1 file changed, 8 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index c07c529b0d81..54aafcc69d06 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -130,8 +130,6 @@ enum qca_speed_type {
> */
> struct qca_vreg {
> const char *name;
> - unsigned int min_uV;
> - unsigned int max_uV;
> unsigned int load_uA;
> };
>
> @@ -1332,10 +1330,10 @@ static const struct hci_uart_proto qca_proto =
> {
> static const struct qca_vreg_data qca_soc_data_wcn3990 = {
> .soc_type = QCA_WCN3990,
> .vregs = (struct qca_vreg []) {
> - { "vddio", 1800000, 1900000, 15000 },
> - { "vddxo", 1800000, 1900000, 80000 },
> - { "vddrf", 1300000, 1350000, 300000 },
> - { "vddch0", 3300000, 3400000, 450000 },
> + { "vddio", 15000 },
> + { "vddxo", 80000 },
> + { "vddrf", 300000 },
> + { "vddch0", 450000 },
> },
> .num_vregs = 4,
> };
> @@ -1343,10 +1341,10 @@ static const struct qca_vreg_data
> qca_soc_data_wcn3990 = {
> static const struct qca_vreg_data qca_soc_data_wcn3998 = {
> .soc_type = QCA_WCN3998,
> .vregs = (struct qca_vreg []) {
> - { "vddio", 1800000, 1900000, 10000 },
> - { "vddxo", 1800000, 1900000, 80000 },
> - { "vddrf", 1300000, 1352000, 300000 },
> - { "vddch0", 3300000, 3300000, 450000 },
> + { "vddio", 10000 },
> + { "vddxo", 80000 },
> + { "vddrf", 300000 },
> + { "vddch0", 450000 },
> },
> .num_vregs = 4,
> };
> @@ -1386,13 +1384,6 @@ static int qca_power_off(struct hci_dev *hdev)
> static int qca_enable_regulator(struct qca_vreg vregs,
> struct regulator *regulator)
> {
> - int ret;
> -
> - ret = regulator_set_voltage(regulator, vregs.min_uV,
> - vregs.max_uV);
> - if (ret)
> - return ret;
> -
> return regulator_enable(regulator);
>
> }
> @@ -1401,7 +1392,6 @@ static void qca_disable_regulator(struct qca_vreg
> vregs,
> struct regulator *regulator)
> {
> regulator_disable(regulator);
> - regulator_set_voltage(regulator, 0, vregs.max_uV);
>
> }