The LG SW43408 panel is used on Google Pixel3 devices. For a long time
we could not submit the driver, as the panel was not coming up from the
reset. The panel seems to be picky about some of the delays during init
and it also uses non-standard payload for MIPI_DSI_COMPRESSION_MODE.
Signed-off-by: Dmitry Baryshkov <[email protected]>
---
Changes in v2:
- Removed formatting char from schema (Krzysztof)
- Moved additionalProperties after required (Krzysztof)
- Added example to the schema (Krzysztof)
- Removed obsolete comment in the commit message (Marijn)
- Moved DSC params to the panel struct (Marijn)
- Changed dsc_en to be an array (Marijn)
- Added comment regiarding slice_width and slice_count (Marijn)
- Link to v1: https://lore.kernel.org/r/[email protected]
---
Dmitry Baryshkov (1):
drm/mipi-dsi: add mipi_dsi_compression_mode_raw()
Sumit Semwal (2):
dt-bindings: panel: Add LG SW43408 MIPI-DSI panel
drm: panel: Add LG sw43408 panel driver
.../bindings/display/panel/lg,sw43408.yaml | 62 ++++
MAINTAINERS | 8 +
drivers/gpu/drm/drm_mipi_dsi.c | 34 ++-
drivers/gpu/drm/panel/Kconfig | 11 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-lg-sw43408.c | 321 +++++++++++++++++++++
include/drm/drm_mipi_dsi.h | 1 +
7 files changed, 430 insertions(+), 8 deletions(-)
---
base-commit: 13ee4a7161b6fd938aef6688ff43b163f6d83e37
change-id: 20240330-lg-sw43408-panel-b552f411c53e
Best regards,
--
Dmitry Baryshkov <[email protected]>
From: Sumit Semwal <[email protected]>
LG SW43408 is 1080x2160, 4-lane MIPI-DSI panel present on Google Pixel 3
phones.
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sumit Semwal <[email protected]>
[caleb: convert to yaml]
Signed-off-by: Caleb Connolly <[email protected]>
Signed-off-by: Dmitry Baryshkov <[email protected]>
---
.../bindings/display/panel/lg,sw43408.yaml | 62 ++++++++++++++++++++++
1 file changed, 62 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/panel/lg,sw43408.yaml b/Documentation/devicetree/bindings/display/panel/lg,sw43408.yaml
new file mode 100644
index 000000000000..1e08648f5bc7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/lg,sw43408.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/lg,sw43408.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LG SW43408 1080x2160 DSI panel
+
+maintainers:
+ - Caleb Connolly <[email protected]>
+
+description:
+ This panel is used on the Pixel 3, it is a 60hz OLED panel which
+ required DSC (Display Stream Compression) and has rounded corners.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: lg,sw43408
+
+ reg: true
+ port: true
+ vddi-supply: true
+ vpnl-supply: true
+ reset-gpios: true
+
+required:
+ - compatible
+ - vddi-supply
+ - vpnl-supply
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "lg,sw43408";
+ reg = <0>;
+
+ vddi-supply = <&vreg_l14a_1p88>;
+ vpnl-supply = <&vreg_l28a_3p0>;
+
+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+ port {
+ endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+ };
+ };
+...
--
2.39.2
The LG SW43408 panel requires sending non-standard data as a part of the
MIPI_DSI_COMPRESSION_MODE packet. Rather than hacking existing
mipi_dsi_compression_mode() add mipi_dsi_compression_mode_raw(), which
accepts raw data buffer and length.
Signed-off-by: Dmitry Baryshkov <[email protected]>
---
drivers/gpu/drm/drm_mipi_dsi.c | 34 ++++++++++++++++++++++++++--------
include/drm/drm_mipi_dsi.h | 1 +
2 files changed, 27 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/drm_mipi_dsi.c b/drivers/gpu/drm/drm_mipi_dsi.c
index ef6e416522f8..f340d1e0a9a5 100644
--- a/drivers/gpu/drm/drm_mipi_dsi.c
+++ b/drivers/gpu/drm/drm_mipi_dsi.c
@@ -645,29 +645,47 @@ int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi,
EXPORT_SYMBOL(mipi_dsi_set_maximum_return_packet_size);
/**
- * mipi_dsi_compression_mode() - enable/disable DSC on the peripheral
+ * mipi_dsi_compression_mode_raw() - control DSC on the peripheral
* @dsi: DSI peripheral device
- * @enable: Whether to enable or disable the DSC
+ * @data: data to be sent to the device
+ * @len: size of the data buffer
*
- * Enable or disable Display Stream Compression on the peripheral using the
+ * Control the Display Stream Compression on the peripheral using the
* default Picture Parameter Set and VESA DSC 1.1 algorithm.
*
* Return: 0 on success or a negative error code on failure.
*/
-ssize_t mipi_dsi_compression_mode(struct mipi_dsi_device *dsi, bool enable)
+ssize_t mipi_dsi_compression_mode_raw(struct mipi_dsi_device *dsi, void *data, size_t len)
{
- /* Note: Needs updating for non-default PPS or algorithm */
- u8 tx[2] = { enable << 0, 0 };
struct mipi_dsi_msg msg = {
.channel = dsi->channel,
.type = MIPI_DSI_COMPRESSION_MODE,
- .tx_len = sizeof(tx),
- .tx_buf = tx,
+ .tx_len = len,
+ .tx_buf = data,
};
int ret = mipi_dsi_device_transfer(dsi, &msg);
return (ret < 0) ? ret : 0;
}
+EXPORT_SYMBOL(mipi_dsi_compression_mode_raw);
+
+/**
+ * mipi_dsi_compression_mode() - enable/disable DSC on the peripheral
+ * @dsi: DSI peripheral device
+ * @enable: Whether to enable or disable the DSC
+ *
+ * Enable or disable Display Stream Compression on the peripheral using the
+ * default Picture Parameter Set and VESA DSC 1.1 algorithm.
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+ssize_t mipi_dsi_compression_mode(struct mipi_dsi_device *dsi, bool enable)
+{
+ /* Note: Needs updating for non-default PPS or algorithm */
+ u8 tx[2] = { enable << 0, 0 };
+
+ return mipi_dsi_compression_mode_raw(dsi, tx, sizeof(tx));
+}
EXPORT_SYMBOL(mipi_dsi_compression_mode);
/**
diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h
index c0aec0d4d664..321d2b019687 100644
--- a/include/drm/drm_mipi_dsi.h
+++ b/include/drm/drm_mipi_dsi.h
@@ -242,6 +242,7 @@ int mipi_dsi_turn_on_peripheral(struct mipi_dsi_device *dsi);
int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi,
u16 value);
ssize_t mipi_dsi_compression_mode(struct mipi_dsi_device *dsi, bool enable);
+ssize_t mipi_dsi_compression_mode_raw(struct mipi_dsi_device *dsi, void *data, size_t len);
ssize_t mipi_dsi_picture_parameter_set(struct mipi_dsi_device *dsi,
const struct drm_dsc_picture_parameter_set *pps);
--
2.39.2
From: Sumit Semwal <[email protected]>
LG SW43408 is 1080x2160, 4-lane MIPI-DSI panel, used in some Pixel3
phones.
Signed-off-by: Sumit Semwal <[email protected]>
[vinod: Add DSC support]
Signed-off-by: Vinod Koul <[email protected]>
[caleb: cleanup and support turning off the panel]
Signed-off-by: Caleb Connolly <[email protected]>
[DB: partially rewrote the driver and fixed DSC programming]
Signed-off-by: Dmitry Baryshkov <[email protected]>
---
MAINTAINERS | 8 +
drivers/gpu/drm/panel/Kconfig | 11 ++
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-lg-sw43408.c | 321 +++++++++++++++++++++++++++++++
4 files changed, 341 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 4b511a55101c..f4cf7ee97376 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6755,6 +6755,14 @@ S: Maintained
F: Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml
F: drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c
+DRM DRIVER FOR LG SW43408 PANELS
+M: Sumit Semwal <[email protected]>
+M: Caleb Connolly <[email protected]>
+S: Maintained
+T: git git://anongit.freedesktop.org/drm/drm-misc
+F: Documentation/devicetree/bindings/display/panel/lg,sw43408.yaml
+F: drivers/gpu/drm/panel/panel-lg-sw43408.c
+
DRM DRIVER FOR LOGICVC DISPLAY CONTROLLER
M: Paul Kocialkowski <[email protected]>
S: Supported
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index d037b3b8b999..f94c702735cb 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -335,6 +335,17 @@ config DRM_PANEL_LG_LG4573
Say Y here if you want to enable support for LG4573 RGB panel.
To compile this driver as a module, choose M here.
+config DRM_PANEL_LG_SW43408
+ tristate "LG SW43408 panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for LG sw43408 panel.
+ The panel has a 1080x2160 resolution and uses
+ 24 bit RGB per pixel. It provides a MIPI DSI interface to
+ the host and has a built-in LED backlight.
+
config DRM_PANEL_MAGNACHIP_D53E6EA8966
tristate "Magnachip D53E6EA8966 DSI panel"
depends on OF && SPI
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index f156d7fa0bcc..a75687d13caf 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W) += panel-leadtek-ltk050h3146w.o
obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829) += panel-leadtek-ltk500hd1829.o
obj-$(CONFIG_DRM_PANEL_LG_LB035Q02) += panel-lg-lb035q02.o
obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
+obj-$(CONFIG_DRM_PANEL_LG_SW43408) += panel-lg-sw43408.o
obj-$(CONFIG_DRM_PANEL_MAGNACHIP_D53E6EA8966) += panel-magnachip-d53e6ea8966.o
obj-$(CONFIG_DRM_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o
obj-$(CONFIG_DRM_PANEL_NEWVISION_NV3051D) += panel-newvision-nv3051d.o
diff --git a/drivers/gpu/drm/panel/panel-lg-sw43408.c b/drivers/gpu/drm/panel/panel-lg-sw43408.c
new file mode 100644
index 000000000000..6c244b9642f1
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-lg-sw43408.c
@@ -0,0 +1,321 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-2024 Linaro Ltd
+ * Author: Sumit Semwal <[email protected]>
+ * Dmitry Baryshkov <[email protected]>
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/display/drm_dsc.h>
+#include <drm/display/drm_dsc_helper.h>
+
+#define NUM_SUPPLIES 2
+
+struct sw43408_panel {
+ struct drm_panel base;
+ struct mipi_dsi_device *link;
+
+ const struct drm_display_mode *mode;
+
+ struct regulator_bulk_data supplies[NUM_SUPPLIES];
+
+ struct gpio_desc *reset_gpio;
+
+ struct drm_dsc_config dsc;
+};
+
+static inline struct sw43408_panel *to_panel_info(struct drm_panel *panel)
+{
+ return container_of(panel, struct sw43408_panel, base);
+}
+
+static int sw43408_unprepare(struct drm_panel *panel)
+{
+ struct sw43408_panel *ctx = to_panel_info(panel);
+ int ret;
+
+ ret = mipi_dsi_dcs_set_display_off(ctx->link);
+ if (ret < 0)
+ dev_err(panel->dev, "set_display_off cmd failed ret = %d\n", ret);
+
+ ret = mipi_dsi_dcs_enter_sleep_mode(ctx->link);
+ if (ret < 0)
+ dev_err(panel->dev, "enter_sleep cmd failed ret = %d\n", ret);
+
+ msleep(100);
+
+ gpiod_set_value(ctx->reset_gpio, 1);
+
+ return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+}
+
+static int sw43408_program(struct drm_panel *panel)
+{
+ struct sw43408_panel *ctx = to_panel_info(panel);
+ struct drm_dsc_picture_parameter_set pps;
+ /* Note; this uses a non-standard argument format */
+ u8 dsc_en[] = { 0x11 };
+
+ mipi_dsi_dcs_write_seq(ctx->link, MIPI_DCS_SET_GAMMA_CURVE, 0x02);
+
+ mipi_dsi_dcs_set_tear_on(ctx->link, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+
+ mipi_dsi_dcs_write_seq(ctx->link, 0x53, 0x0c, 0x30);
+ mipi_dsi_dcs_write_seq(ctx->link, 0x55, 0x00, 0x70, 0xdf, 0x00, 0x70, 0xdf);
+ mipi_dsi_dcs_write_seq(ctx->link, 0xf7, 0x01, 0x49, 0x0c);
+
+ mipi_dsi_dcs_exit_sleep_mode(ctx->link);
+
+ msleep(135);
+
+ mipi_dsi_compression_mode_raw(ctx->link, dsc_en, sizeof(dsc_en));
+
+ mipi_dsi_dcs_write_seq(ctx->link, 0xb0, 0xac);
+ mipi_dsi_dcs_write_seq(ctx->link, 0xe5,
+ 0x00, 0x3a, 0x00, 0x3a, 0x00, 0x0e, 0x10);
+ mipi_dsi_dcs_write_seq(ctx->link, 0xb5,
+ 0x75, 0x60, 0x2d, 0x5d, 0x80, 0x00, 0x0a, 0x0b,
+ 0x00, 0x05, 0x0b, 0x00, 0x80, 0x0d, 0x0e, 0x40,
+ 0x00, 0x0c, 0x00, 0x16, 0x00, 0xb8, 0x00, 0x80,
+ 0x0d, 0x0e, 0x40, 0x00, 0x0c, 0x00, 0x16, 0x00,
+ 0xb8, 0x00, 0x81, 0x00, 0x03, 0x03, 0x03, 0x01,
+ 0x01);
+ msleep(85);
+ mipi_dsi_dcs_write_seq(ctx->link, 0xcd,
+ 0x00, 0x00, 0x00, 0x19, 0x19, 0x19, 0x19, 0x19,
+ 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19,
+ 0x16, 0x16);
+ mipi_dsi_dcs_write_seq(ctx->link, 0xcb, 0x80, 0x5c, 0x07, 0x03, 0x28);
+ mipi_dsi_dcs_write_seq(ctx->link, 0xc0, 0x02, 0x02, 0x0f);
+ mipi_dsi_dcs_write_seq(ctx->link, 0x55, 0x04, 0x61, 0xdb, 0x04, 0x70, 0xdb);
+ mipi_dsi_dcs_write_seq(ctx->link, 0xb0, 0xca);
+
+ mipi_dsi_dcs_set_display_on(ctx->link);
+
+ msleep(50);
+
+ ctx->link->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+ drm_dsc_pps_payload_pack(&pps, ctx->link->dsc);
+ mipi_dsi_picture_parameter_set(ctx->link, &pps);
+
+ ctx->link->mode_flags |= MIPI_DSI_MODE_LPM;
+
+ return 0;
+}
+
+static int sw43408_prepare(struct drm_panel *panel)
+{
+ struct sw43408_panel *ctx = to_panel_info(panel);
+ int ret;
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+ if (ret < 0)
+ return ret;
+
+ usleep_range(5000, 6000);
+
+ gpiod_set_value(ctx->reset_gpio, 0);
+ usleep_range(9000, 10000);
+ gpiod_set_value(ctx->reset_gpio, 1);
+ usleep_range(1000, 2000);
+ gpiod_set_value(ctx->reset_gpio, 0);
+ usleep_range(9000, 10000);
+
+ ret = sw43408_program(panel);
+ if (ret)
+ goto poweroff;
+
+ return 0;
+
+poweroff:
+ gpiod_set_value(ctx->reset_gpio, 1);
+ regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+ return ret;
+}
+
+static int sw43408_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ struct sw43408_panel *ctx = to_panel_info(panel);
+
+ return drm_connector_helper_get_modes_fixed(connector, ctx->mode);
+}
+
+static int sw43408_backlight_update_status(struct backlight_device *bl)
+{
+ struct mipi_dsi_device *dsi = bl_get_data(bl);
+ uint16_t brightness = backlight_get_brightness(bl);
+
+ return mipi_dsi_dcs_set_display_brightness_large(dsi, brightness);
+}
+
+const struct backlight_ops sw43408_backlight_ops = {
+ .update_status = sw43408_backlight_update_status,
+};
+
+static int sw43408_backlight_init(struct sw43408_panel *ctx)
+{
+ struct device *dev = &ctx->link->dev;
+ const struct backlight_properties props = {
+ .type = BACKLIGHT_PLATFORM,
+ .brightness = 255,
+ .max_brightness = 255,
+ };
+
+ ctx->base.backlight = devm_backlight_device_register(dev, dev_name(dev), dev,
+ ctx->link,
+ &sw43408_backlight_ops,
+ &props);
+
+ if (IS_ERR(ctx->base.backlight))
+ return dev_err_probe(dev, PTR_ERR(ctx->base.backlight),
+ "Failed to create backlight\n");
+
+ return 0;
+}
+
+static const struct drm_panel_funcs sw43408_funcs = {
+ .unprepare = sw43408_unprepare,
+ .prepare = sw43408_prepare,
+ .get_modes = sw43408_get_modes,
+};
+
+static const struct drm_display_mode sw43408_default_mode = {
+ .clock = 152340,
+
+ .hdisplay = 1080,
+ .hsync_start = 1080 + 20,
+ .hsync_end = 1080 + 20 + 32,
+ .htotal = 1080 + 20 + 32 + 20,
+
+ .vdisplay = 2160,
+ .vsync_start = 2160 + 20,
+ .vsync_end = 2160 + 20 + 4,
+ .vtotal = 2160 + 20 + 4 + 20,
+
+ .width_mm = 62,
+ .height_mm = 124,
+
+ .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+};
+
+static const struct of_device_id sw43408_of_match[] = {
+ { .compatible = "lg,sw43408", .data = &sw43408_default_mode },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sw43408_of_match);
+
+static int sw43408_add(struct sw43408_panel *ctx)
+{
+ struct device *dev = &ctx->link->dev;
+ int ret;
+
+ ctx->supplies[0].supply = "vddi"; /* 1.88 V */
+ ctx->supplies[0].init_load_uA = 62000;
+ ctx->supplies[1].supply = "vpnl"; /* 3.0 V */
+ ctx->supplies[1].init_load_uA = 857000;
+
+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
+ ctx->supplies);
+ if (ret < 0)
+ return ret;
+
+ ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(ctx->reset_gpio)) {
+ dev_err(dev, "cannot get reset gpio %ld\n",
+ PTR_ERR(ctx->reset_gpio));
+ return PTR_ERR(ctx->reset_gpio);
+ }
+
+ ret = sw43408_backlight_init(ctx);
+ if (ret < 0)
+ return ret;
+
+ ctx->base.prepare_prev_first = true;
+
+ drm_panel_init(&ctx->base, dev, &sw43408_funcs, DRM_MODE_CONNECTOR_DSI);
+
+ drm_panel_add(&ctx->base);
+ return ret;
+}
+
+static int sw43408_probe(struct mipi_dsi_device *dsi)
+{
+ struct sw43408_panel *ctx;
+ int ret;
+
+ ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->mode = of_device_get_match_data(&dsi->dev);
+ dsi->mode_flags = MIPI_DSI_MODE_LPM;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->lanes = 4;
+
+ ctx->link = dsi;
+ mipi_dsi_set_drvdata(dsi, ctx);
+
+ ret = sw43408_add(ctx);
+ if (ret < 0)
+ return ret;
+
+ /* The panel is DSC panel only, set the dsc params */
+ ctx->dsc.dsc_version_major = 0x1;
+ ctx->dsc.dsc_version_minor = 0x1;
+
+ /* slice_count * slice_width == width */
+ ctx->dsc.slice_height = 16;
+ ctx->dsc.slice_width = 540;
+ ctx->dsc.slice_count = 2;
+ ctx->dsc.bits_per_component = 8;
+ ctx->dsc.bits_per_pixel = 8 << 4;
+ ctx->dsc.block_pred_enable = true;
+
+ dsi->dsc = &ctx->dsc;
+
+ return mipi_dsi_attach(dsi);
+}
+
+static void sw43408_remove(struct mipi_dsi_device *dsi)
+{
+ struct sw43408_panel *ctx = mipi_dsi_get_drvdata(dsi);
+ int ret;
+
+ ret = sw43408_unprepare(&ctx->base);
+ if (ret < 0)
+ dev_err(&dsi->dev, "failed to unprepare panel: %d\n",
+ ret);
+
+ ret = mipi_dsi_detach(dsi);
+ if (ret < 0)
+ dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret);
+
+ drm_panel_remove(&ctx->base);
+}
+
+static struct mipi_dsi_driver sw43408_driver = {
+ .driver = {
+ .name = "panel-lg-sw43408",
+ .of_match_table = sw43408_of_match,
+ },
+ .probe = sw43408_probe,
+ .remove = sw43408_remove,
+};
+module_mipi_dsi_driver(sw43408_driver);
+
+MODULE_AUTHOR("Sumit Semwal <[email protected]>");
+MODULE_DESCRIPTION("LG SW436408 MIPI-DSI LED panel");
+MODULE_LICENSE("GPL");
--
2.39.2
On 30/03/2024 16:00, Dmitry Baryshkov wrote:
> From: Sumit Semwal <[email protected]>
>
> LG SW43408 is 1080x2160, 4-lane MIPI-DSI panel present on Google Pixel 3
> phones.
>
> Signed-off-by: Vinod Koul <[email protected]>
> Signed-off-by: Sumit Semwal <[email protected]>
> [caleb: convert to yaml]
> Signed-off-by: Caleb Connolly <[email protected]>
> Signed-off-by: Dmitry Baryshkov <[email protected]>
> ---
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof