Replace the q40ide driver with falconide and pata_falcon platform
drivers. This allows q40 machines to migrate from the deprecated IDE
subsystem to libata.
Enhance the byte-swapping falconide and pata_falcon platform drivers to
accept an irq resource, for use on q40. Atari ST-DMA IRQ arrangements seem
to co-exist with q40 IRQ arrangements without too much mess.
The new IO resources were added solely for the purpose of making
request_region() reservations identical to those made by q40ide: these
regions aren't used for actual IO.
Cc: Michael Schmitz <[email protected]>
Cc: Richard Zidlicky <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: "David S. Miller" <[email protected]>
Signed-off-by: Finn Thain <[email protected]>
---
Note that q40ide, falconide and pata_falcon all use the same accessors
(raw_insw_swapw, raw_insw, raw_outsw_swapw, raw_outsw) and hence all
three drivers are affected by the bug relating to CONFIG_ISA and
CONFIG_ATARI_ROM_ISA which Michael has been working on recently.
This patch doesn't make that issue any better or worse.
---
arch/m68k/atari/config.c | 12 +--
arch/m68k/configs/multi_defconfig | 1 -
arch/m68k/configs/q40_defconfig | 2 +-
arch/m68k/q40/config.c | 37 +++++--
drivers/ata/Kconfig | 6 +-
drivers/ata/pata_falcon.c | 62 ++++++++---
drivers/ide/Kconfig | 18 +---
drivers/ide/Makefile | 1 -
drivers/ide/falconide.c | 75 ++++++++-----
drivers/ide/q40ide.c | 168 ------------------------------
10 files changed, 137 insertions(+), 245 deletions(-)
delete mode 100644 drivers/ide/q40ide.c
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index 44f9b5216ac9..261a0f57cc9a 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -875,16 +875,8 @@ static const struct resource atari_scsi_tt_rsrc[] __initconst = {
#define FALCON_IDE_BASE 0xfff00000
static const struct resource atari_falconide_rsrc[] __initconst = {
- {
- .flags = IORESOURCE_MEM,
- .start = FALCON_IDE_BASE,
- .end = FALCON_IDE_BASE + 0x39,
- },
- {
- .flags = IORESOURCE_IRQ,
- .start = IRQ_MFP_FSCSI,
- .end = IRQ_MFP_FSCSI,
- },
+ DEFINE_RES_MEM(FALCON_IDE_BASE, 0x38),
+ DEFINE_RES_MEM(FALCON_IDE_BASE + 0x38, 2),
};
int __init atari_platform_init(void)
diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig
index 9ee6d2b4d1f4..f4cafed671cb 100644
--- a/arch/m68k/configs/multi_defconfig
+++ b/arch/m68k/configs/multi_defconfig
@@ -351,7 +351,6 @@ CONFIG_BLK_DEV_PLATFORM=y
CONFIG_BLK_DEV_GAYLE=y
CONFIG_BLK_DEV_BUDDHA=y
CONFIG_BLK_DEV_FALCON_IDE=y
-CONFIG_BLK_DEV_Q40IDE=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index 3ae421cb24a4..2c25b4096397 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -317,7 +317,7 @@ CONFIG_DUMMY_IRQ=m
CONFIG_IDE=y
CONFIG_IDE_GD_ATAPI=y
CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_Q40IDE=y
+CONFIG_BLK_DEV_FALCON_IDE=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index d6a423875231..5caf1e5be1c2 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -286,14 +286,39 @@ static int q40_set_rtc_pll(struct rtc_pll_info *pll)
return -EINVAL;
}
-static __init int q40_add_kbd_device(void)
-{
- struct platform_device *pdev;
+#define PCIDE_BASE1 0x1f0
+#define PCIDE_BASE2 0x170
+#define PCIDE_CTL 0x206
+
+static const struct resource q40_pata_rsrc_0[] __initconst = {
+ DEFINE_RES_MEM(q40_isa_io_base + PCIDE_BASE1 * 4, 0x38),
+ DEFINE_RES_MEM(q40_isa_io_base + (PCIDE_BASE1 + PCIDE_CTL) * 4, 2),
+ DEFINE_RES_IO(PCIDE_BASE1, 8),
+ DEFINE_RES_IO(PCIDE_BASE1 + PCIDE_CTL, 1),
+ DEFINE_RES_IRQ(14),
+};
+static const struct resource q40_pata_rsrc_1[] __initconst = {
+ DEFINE_RES_MEM(q40_isa_io_base + PCIDE_BASE2 * 4, 0x38),
+ DEFINE_RES_MEM(q40_isa_io_base + (PCIDE_BASE2 + PCIDE_CTL) * 4, 2),
+ DEFINE_RES_IO(PCIDE_BASE2, 8),
+ DEFINE_RES_IO(PCIDE_BASE2 + PCIDE_CTL, 1),
+ DEFINE_RES_IRQ(15),
+};
+
+static __init int q40_platform_init(void)
+{
if (!MACH_IS_Q40)
return -ENODEV;
- pdev = platform_device_register_simple("q40kbd", -1, NULL, 0);
- return PTR_ERR_OR_ZERO(pdev);
+ platform_device_register_simple("q40kbd", -1, NULL, 0);
+
+ platform_device_register_simple("atari-falcon-ide", 0, q40_pata_rsrc_0,
+ ARRAY_SIZE(q40_pata_rsrc_0));
+
+ platform_device_register_simple("atari-falcon-ide", 1, q40_pata_rsrc_1,
+ ARRAY_SIZE(q40_pata_rsrc_1));
+
+ return 0;
}
-arch_initcall(q40_add_kbd_device);
+arch_initcall(q40_platform_init);
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 030cb32da980..b7a5abee2147 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -1015,11 +1015,11 @@ config PATA_CMD640_PCI
If unsure, say N.
config PATA_FALCON
- tristate "Atari Falcon PATA support"
- depends on M68K && ATARI
+ tristate "Atari Falcon and Q40/Q60 PATA support"
+ depends on M68K && (ATARI || Q40)
help
This option enables support for the on-board IDE
- interface on the Atari Falcon.
+ interface on the Atari Falcon and Q40/Q60.
If unsure, say N.
diff --git a/drivers/ata/pata_falcon.c b/drivers/ata/pata_falcon.c
index 27b0952fde6b..9d0dd8f4c21c 100644
--- a/drivers/ata/pata_falcon.c
+++ b/drivers/ata/pata_falcon.c
@@ -33,8 +33,6 @@
#define DRV_NAME "pata_falcon"
#define DRV_VERSION "0.1.0"
-#define ATA_HD_CONTROL 0x39
-
static struct scsi_host_template pata_falcon_sht = {
ATA_PIO_SHT(DRV_NAME),
};
@@ -121,23 +119,42 @@ static struct ata_port_operations pata_falcon_ops = {
static int __init pata_falcon_init_one(struct platform_device *pdev)
{
- struct resource *res;
+ struct resource *base_mem_res, *ctl_mem_res;
+ struct resource *base_res, *ctl_res, *irq_res;
struct ata_host *host;
struct ata_port *ap;
void __iomem *base;
+ int irq = 0;
- dev_info(&pdev->dev, "Atari Falcon PATA controller\n");
+ dev_info(&pdev->dev, "Atari Falcon and Q40/Q60 PATA controller\n");
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENODEV;
+ base_res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (base_res && !devm_request_region(&pdev->dev, base_res->start,
+ resource_size(base_res), DRV_NAME)) {
+ dev_err(&pdev->dev, "resources busy\n");
+ return -EBUSY;
+ }
- if (!devm_request_mem_region(&pdev->dev, res->start,
- resource_size(res), DRV_NAME)) {
+ ctl_res = platform_get_resource(pdev, IORESOURCE_IO, 1);
+ if (ctl_res && !devm_request_region(&pdev->dev, ctl_res->start,
+ resource_size(ctl_res), DRV_NAME)) {
dev_err(&pdev->dev, "resources busy\n");
return -EBUSY;
}
+ base_mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!base_mem_res)
+ return -ENODEV;
+ if (!devm_request_mem_region(&pdev->dev, base_mem_res->start,
+ resource_size(base_mem_res), DRV_NAME)) {
+ dev_err(&pdev->dev, "resources busy\n");
+ return -EBUSY;
+ }
+
+ ctl_mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!ctl_mem_res)
+ return -ENODEV;
+
/* allocate host */
host = ata_host_alloc(&pdev->dev, 1);
if (!host)
@@ -147,10 +164,10 @@ static int __init pata_falcon_init_one(struct platform_device *pdev)
ap->ops = &pata_falcon_ops;
ap->pio_mask = ATA_PIO4;
ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
- ap->flags |= ATA_FLAG_PIO_POLLING;
- base = (void __iomem *)res->start;
- ap->ioaddr.data_addr = base;
+ base = (void __iomem *)base_mem_res->start;
+ /* N.B. this assumes data_addr will be used for word-sized I/O only */
+ ap->ioaddr.data_addr = base + 0 + 0 * 4;
ap->ioaddr.error_addr = base + 1 + 1 * 4;
ap->ioaddr.feature_addr = base + 1 + 1 * 4;
ap->ioaddr.nsect_addr = base + 1 + 2 * 4;
@@ -161,14 +178,25 @@ static int __init pata_falcon_init_one(struct platform_device *pdev)
ap->ioaddr.status_addr = base + 1 + 7 * 4;
ap->ioaddr.command_addr = base + 1 + 7 * 4;
- ap->ioaddr.altstatus_addr = base + ATA_HD_CONTROL;
- ap->ioaddr.ctl_addr = base + ATA_HD_CONTROL;
+ base = (void __iomem *)ctl_mem_res->start;
+ ap->ioaddr.altstatus_addr = base + 1;
+ ap->ioaddr.ctl_addr = base + 1;
- ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", (unsigned long)base,
- (unsigned long)base + ATA_HD_CONTROL);
+ ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx",
+ (unsigned long)base_mem_res->start,
+ (unsigned long)ctl_mem_res->start);
+
+ irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (irq_res && irq_res->start > 0) {
+ irq = irq_res->start;
+ } else {
+ ap->flags |= ATA_FLAG_PIO_POLLING;
+ ata_port_desc(ap, "no IRQ, using PIO polling");
+ }
/* activate */
- return ata_host_activate(host, 0, NULL, 0, &pata_falcon_sht);
+ return ata_host_activate(host, irq, irq ? ata_sff_interrupt : NULL,
+ IRQF_SHARED, &pata_falcon_sht);
}
static int __exit pata_falcon_remove_one(struct platform_device *pdev)
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 8ce4a5878d0c..8af1ac69e5f8 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -731,21 +731,13 @@ config BLK_DEV_BUDDHA
to one of its IDE interfaces.
config BLK_DEV_FALCON_IDE
- tristate "Falcon IDE interface support"
- depends on ATARI
+ tristate "Falcon and Q40/Q60 IDE interface support"
+ depends on ATARI || Q40
help
This is the IDE driver for the on-board IDE interface on the Atari
- Falcon. Say Y if you have a Falcon and want to use IDE devices (hard
- disks, CD-ROM drives, etc.) that are connected to the on-board IDE
- interface.
-
-config BLK_DEV_Q40IDE
- tristate "Q40/Q60 IDE interface support"
- depends on Q40
- help
- Enable the on-board IDE controller in the Q40/Q60. This should
- normally be on; disable it only if you are running a custom hard
- drive subsystem through an expansion card.
+ Falcon and Q40/Q60. Say Y if you have such a machine and want to use
+ IDE devices (hard disks, CD-ROM drives, etc.) that are connected to
+ the on-board IDE interface.
config BLK_DEV_PALMCHIP_BK3710
tristate "Palmchip bk3710 IDE controller support"
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index 45a1c0463bed..991eb72a786b 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -29,7 +29,6 @@ obj-$(CONFIG_BLK_DEV_4DRIVES) += ide-4drives.o
obj-$(CONFIG_BLK_DEV_GAYLE) += gayle.o
obj-$(CONFIG_BLK_DEV_FALCON_IDE) += falconide.o
-obj-$(CONFIG_BLK_DEV_Q40IDE) += q40ide.o
obj-$(CONFIG_BLK_DEV_BUDDHA) += buddha.o
obj-$(CONFIG_BLK_DEV_AEC62XX) += aec62xx.o
diff --git a/drivers/ide/falconide.c b/drivers/ide/falconide.c
index bb86d84558d9..fce68412b3c9 100644
--- a/drivers/ide/falconide.c
+++ b/drivers/ide/falconide.c
@@ -25,12 +25,6 @@
#define DRV_NAME "falconide"
- /*
- * Offsets from base address
- */
-
-#define ATA_HD_CONTROL 0x39
-
/*
* falconide_intr_lock is used to obtain access to the IDE interrupt,
* which is shared between several drivers.
@@ -107,7 +101,8 @@ static const struct ide_port_info falconide_port_info = {
.chipset = ide_generic,
};
-static void __init falconide_setup_ports(struct ide_hw *hw, unsigned long base)
+static void __init falconide_setup_ports(struct ide_hw *hw, unsigned long base,
+ unsigned long ctl, int irq)
{
int i;
@@ -118,9 +113,9 @@ static void __init falconide_setup_ports(struct ide_hw *hw, unsigned long base)
for (i = 1; i < 8; i++)
hw->io_ports_array[i] = base + 1 + i * 4;
- hw->io_ports.ctl_addr = base + ATA_HD_CONTROL;
+ hw->io_ports.ctl_addr = ctl + 1;
- hw->irq = IRQ_MFP_IDE;
+ hw->irq = irq;
}
/*
@@ -129,37 +124,69 @@ static void __init falconide_setup_ports(struct ide_hw *hw, unsigned long base)
static int __init falconide_init(struct platform_device *pdev)
{
- struct resource *res;
+ struct resource *base_mem_res, *ctl_mem_res;
+ struct resource *base_res, *ctl_res, *irq_res;
struct ide_host *host;
struct ide_hw hw, *hws[] = { &hw };
- unsigned long base;
int rc;
+ int irq;
+
+ dev_info(&pdev->dev, "Atari Falcon and Q40/Q60 IDE controller\n");
+
+ base_res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (base_res && !devm_request_region(&pdev->dev, base_res->start,
+ resource_size(base_res), DRV_NAME)) {
+ dev_err(&pdev->dev, "resources busy\n");
+ return -EBUSY;
+ }
- dev_info(&pdev->dev, "Atari Falcon IDE controller\n");
+ ctl_res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (ctl_res && !devm_request_region(&pdev->dev, ctl_res->start,
+ resource_size(ctl_res), DRV_NAME)) {
+ dev_err(&pdev->dev, "resources busy\n");
+ return -EBUSY;
+ }
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
+ base_mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!base_mem_res)
return -ENODEV;
- if (!devm_request_mem_region(&pdev->dev, res->start,
- resource_size(res), DRV_NAME)) {
+ if (!devm_request_mem_region(&pdev->dev, base_mem_res->start,
+ resource_size(base_mem_res), DRV_NAME)) {
dev_err(&pdev->dev, "resources busy\n");
return -EBUSY;
}
- base = (unsigned long)res->start;
+ ctl_mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!ctl_mem_res)
+ return -ENODEV;
+
+ if (MACH_IS_ATARI) {
+ irq = IRQ_MFP_IDE;
+ } else {
+ irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (irq_res && irq_res->start > 0)
+ irq = irq_res->start;
+ else
+ return -ENODEV;
+ }
- falconide_setup_ports(&hw, base);
+ falconide_setup_ports(&hw, base_mem_res->start, ctl_mem_res->start, irq);
host = ide_host_alloc(&falconide_port_info, hws, 1);
- if (host == NULL) {
- rc = -ENOMEM;
- goto err;
+ if (!host)
+ return -ENOMEM;
+
+ if (!MACH_IS_ATARI) {
+ host->get_lock = NULL;
+ host->release_lock = NULL;
}
- falconide_get_lock(NULL, NULL);
+ if (host->get_lock)
+ host->get_lock(NULL, NULL);
rc = ide_host_register(host, &falconide_port_info, hws);
- falconide_release_lock();
+ if (host->release_lock)
+ host->release_lock();
if (rc)
goto err_free;
@@ -168,8 +195,6 @@ static int __init falconide_init(struct platform_device *pdev)
return 0;
err_free:
ide_host_free(host);
-err:
- release_mem_region(res->start, resource_size(res));
return rc;
}
diff --git a/drivers/ide/q40ide.c b/drivers/ide/q40ide.c
deleted file mode 100644
index ecd0a69245f6..000000000000
--- a/drivers/ide/q40ide.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * Q40 I/O port IDE Driver
- *
- * (c) Richard Zidlicky
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- *
- *
- */
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/blkdev.h>
-#include <linux/ide.h>
-#include <linux/module.h>
-
-#include <asm/ide.h>
-
- /*
- * Bases of the IDE interfaces
- */
-
-#define Q40IDE_NUM_HWIFS 2
-
-#define PCIDE_BASE1 0x1f0
-#define PCIDE_BASE2 0x170
-#define PCIDE_BASE3 0x1e8
-#define PCIDE_BASE4 0x168
-#define PCIDE_BASE5 0x1e0
-#define PCIDE_BASE6 0x160
-
-static const unsigned long pcide_bases[Q40IDE_NUM_HWIFS] = {
- PCIDE_BASE1, PCIDE_BASE2, /* PCIDE_BASE3, PCIDE_BASE4 , PCIDE_BASE5,
- PCIDE_BASE6 */
-};
-
-static int q40ide_default_irq(unsigned long base)
-{
- switch (base) {
- case 0x1f0: return 14;
- case 0x170: return 15;
- case 0x1e8: return 11;
- default:
- return 0;
- }
-}
-
-
-/*
- * Addresses are pretranslated for Q40 ISA access.
- */
-static void q40_ide_setup_ports(struct ide_hw *hw, unsigned long base, int irq)
-{
- memset(hw, 0, sizeof(*hw));
- /* BIG FAT WARNING:
- assumption: only DATA port is ever used in 16 bit mode */
- hw->io_ports.data_addr = Q40_ISA_IO_W(base);
- hw->io_ports.error_addr = Q40_ISA_IO_B(base + 1);
- hw->io_ports.nsect_addr = Q40_ISA_IO_B(base + 2);
- hw->io_ports.lbal_addr = Q40_ISA_IO_B(base + 3);
- hw->io_ports.lbam_addr = Q40_ISA_IO_B(base + 4);
- hw->io_ports.lbah_addr = Q40_ISA_IO_B(base + 5);
- hw->io_ports.device_addr = Q40_ISA_IO_B(base + 6);
- hw->io_ports.status_addr = Q40_ISA_IO_B(base + 7);
- hw->io_ports.ctl_addr = Q40_ISA_IO_B(base + 0x206);
-
- hw->irq = irq;
-}
-
-static void q40ide_input_data(ide_drive_t *drive, struct ide_cmd *cmd,
- void *buf, unsigned int len)
-{
- unsigned long data_addr = drive->hwif->io_ports.data_addr;
-
- if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) {
- __ide_mm_insw(data_addr, buf, (len + 1) / 2);
- return;
- }
-
- raw_insw_swapw((u16 *)data_addr, buf, (len + 1) / 2);
-}
-
-static void q40ide_output_data(ide_drive_t *drive, struct ide_cmd *cmd,
- void *buf, unsigned int len)
-{
- unsigned long data_addr = drive->hwif->io_ports.data_addr;
-
- if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) {
- __ide_mm_outsw(data_addr, buf, (len + 1) / 2);
- return;
- }
-
- raw_outsw_swapw((u16 *)data_addr, buf, (len + 1) / 2);
-}
-
-/* Q40 has a byte-swapped IDE interface */
-static const struct ide_tp_ops q40ide_tp_ops = {
- .exec_command = ide_exec_command,
- .read_status = ide_read_status,
- .read_altstatus = ide_read_altstatus,
- .write_devctl = ide_write_devctl,
-
- .dev_select = ide_dev_select,
- .tf_load = ide_tf_load,
- .tf_read = ide_tf_read,
-
- .input_data = q40ide_input_data,
- .output_data = q40ide_output_data,
-};
-
-static const struct ide_port_info q40ide_port_info = {
- .tp_ops = &q40ide_tp_ops,
- .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
- .irq_flags = IRQF_SHARED,
- .chipset = ide_generic,
-};
-
-/*
- * the static array is needed to have the name reported in /proc/ioports,
- * hwif->name unfortunately isn't available yet
- */
-static const char *q40_ide_names[Q40IDE_NUM_HWIFS]={
- "ide0", "ide1"
-};
-
-/*
- * Probe for Q40 IDE interfaces
- */
-
-static int __init q40ide_init(void)
-{
- int i;
- struct ide_hw hw[Q40IDE_NUM_HWIFS], *hws[] = { NULL, NULL };
-
- if (!MACH_IS_Q40)
- return -ENODEV;
-
- printk(KERN_INFO "ide: Q40 IDE controller\n");
-
- for (i = 0; i < Q40IDE_NUM_HWIFS; i++) {
- const char *name = q40_ide_names[i];
-
- if (!request_region(pcide_bases[i], 8, name)) {
- printk("could not reserve ports %lx-%lx for %s\n",
- pcide_bases[i],pcide_bases[i]+8,name);
- continue;
- }
- if (!request_region(pcide_bases[i]+0x206, 1, name)) {
- printk("could not reserve port %lx for %s\n",
- pcide_bases[i]+0x206,name);
- release_region(pcide_bases[i], 8);
- continue;
- }
- q40_ide_setup_ports(&hw[i], pcide_bases[i],
- q40ide_default_irq(pcide_bases[i]));
-
- hws[i] = &hw[i];
- }
-
- return ide_host_add(&q40ide_port_info, hws, Q40IDE_NUM_HWIFS, NULL);
-}
-
-module_init(q40ide_init);
-
-MODULE_LICENSE("GPL");
--
2.26.3
Hi Finn,
are there any substantial changes from what I'd tested before? Your
patch conflicts with (I think) the Mac IDE patches now in Geert's tree,
and I'd rather avoid hand-patching the lot if at all possible:
m68k_q40_Replace_q40ide_with_pata_falcon_and_falconide
Applying: m68k/q40: Replace q40ide with pata_falcon and falconide
error: patch failed: arch/m68k/configs/multi_defconfig:351
error: arch/m68k/configs/multi_defconfig: patch does not apply
error: patch failed: drivers/ide/Kconfig:731
error: drivers/ide/Kconfig: patch does not apply
error: patch failed: drivers/ide/Makefile:29
error: drivers/ide/Makefile: patch does not apply
What's your baseline for this patch?
(In the alternative: just add my Tested-by if nothing changed aside from
the IO region reservation)
Cheers,
Michael
Am 06.06.2021 um 21:15 schrieb Finn Thain:
> Replace the q40ide driver with falconide and pata_falcon platform
> drivers. This allows q40 machines to migrate from the deprecated IDE
> subsystem to libata.
>
> Enhance the byte-swapping falconide and pata_falcon platform drivers to
> accept an irq resource, for use on q40. Atari ST-DMA IRQ arrangements seem
> to co-exist with q40 IRQ arrangements without too much mess.
>
> The new IO resources were added solely for the purpose of making
> request_region() reservations identical to those made by q40ide: these
> regions aren't used for actual IO.
>
> Cc: Michael Schmitz <[email protected]>
> Cc: Richard Zidlicky <[email protected]>
> Cc: Jens Axboe <[email protected]>
> Cc: "David S. Miller" <[email protected]>
> Signed-off-by: Finn Thain <[email protected]>
> ---
> Note that q40ide, falconide and pata_falcon all use the same accessors
> (raw_insw_swapw, raw_insw, raw_outsw_swapw, raw_outsw) and hence all
> three drivers are affected by the bug relating to CONFIG_ISA and
> CONFIG_ATARI_ROM_ISA which Michael has been working on recently.
> This patch doesn't make that issue any better or worse.
> ---
> arch/m68k/atari/config.c | 12 +--
> arch/m68k/configs/multi_defconfig | 1 -
> arch/m68k/configs/q40_defconfig | 2 +-
> arch/m68k/q40/config.c | 37 +++++--
> drivers/ata/Kconfig | 6 +-
> drivers/ata/pata_falcon.c | 62 ++++++++---
> drivers/ide/Kconfig | 18 +---
> drivers/ide/Makefile | 1 -
> drivers/ide/falconide.c | 75 ++++++++-----
> drivers/ide/q40ide.c | 168 ------------------------------
> 10 files changed, 137 insertions(+), 245 deletions(-)
> delete mode 100644 drivers/ide/q40ide.c
>
> diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
> index 44f9b5216ac9..261a0f57cc9a 100644
> --- a/arch/m68k/atari/config.c
> +++ b/arch/m68k/atari/config.c
> @@ -875,16 +875,8 @@ static const struct resource atari_scsi_tt_rsrc[] __initconst = {
> #define FALCON_IDE_BASE 0xfff00000
>
> static const struct resource atari_falconide_rsrc[] __initconst = {
> - {
> - .flags = IORESOURCE_MEM,
> - .start = FALCON_IDE_BASE,
> - .end = FALCON_IDE_BASE + 0x39,
> - },
> - {
> - .flags = IORESOURCE_IRQ,
> - .start = IRQ_MFP_FSCSI,
> - .end = IRQ_MFP_FSCSI,
> - },
> + DEFINE_RES_MEM(FALCON_IDE_BASE, 0x38),
> + DEFINE_RES_MEM(FALCON_IDE_BASE + 0x38, 2),
> };
>
> int __init atari_platform_init(void)
> diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig
> index 9ee6d2b4d1f4..f4cafed671cb 100644
> --- a/arch/m68k/configs/multi_defconfig
> +++ b/arch/m68k/configs/multi_defconfig
> @@ -351,7 +351,6 @@ CONFIG_BLK_DEV_PLATFORM=y
> CONFIG_BLK_DEV_GAYLE=y
> CONFIG_BLK_DEV_BUDDHA=y
> CONFIG_BLK_DEV_FALCON_IDE=y
> -CONFIG_BLK_DEV_Q40IDE=y
> CONFIG_RAID_ATTRS=m
> CONFIG_SCSI=y
> CONFIG_BLK_DEV_SD=y
> diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
> index 3ae421cb24a4..2c25b4096397 100644
> --- a/arch/m68k/configs/q40_defconfig
> +++ b/arch/m68k/configs/q40_defconfig
> @@ -317,7 +317,7 @@ CONFIG_DUMMY_IRQ=m
> CONFIG_IDE=y
> CONFIG_IDE_GD_ATAPI=y
> CONFIG_BLK_DEV_IDECD=y
> -CONFIG_BLK_DEV_Q40IDE=y
> +CONFIG_BLK_DEV_FALCON_IDE=y
> CONFIG_RAID_ATTRS=m
> CONFIG_SCSI=y
> CONFIG_BLK_DEV_SD=y
> diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
> index d6a423875231..5caf1e5be1c2 100644
> --- a/arch/m68k/q40/config.c
> +++ b/arch/m68k/q40/config.c
> @@ -286,14 +286,39 @@ static int q40_set_rtc_pll(struct rtc_pll_info *pll)
> return -EINVAL;
> }
>
> -static __init int q40_add_kbd_device(void)
> -{
> - struct platform_device *pdev;
> +#define PCIDE_BASE1 0x1f0
> +#define PCIDE_BASE2 0x170
> +#define PCIDE_CTL 0x206
> +
> +static const struct resource q40_pata_rsrc_0[] __initconst = {
> + DEFINE_RES_MEM(q40_isa_io_base + PCIDE_BASE1 * 4, 0x38),
> + DEFINE_RES_MEM(q40_isa_io_base + (PCIDE_BASE1 + PCIDE_CTL) * 4, 2),
> + DEFINE_RES_IO(PCIDE_BASE1, 8),
> + DEFINE_RES_IO(PCIDE_BASE1 + PCIDE_CTL, 1),
> + DEFINE_RES_IRQ(14),
> +};
>
> +static const struct resource q40_pata_rsrc_1[] __initconst = {
> + DEFINE_RES_MEM(q40_isa_io_base + PCIDE_BASE2 * 4, 0x38),
> + DEFINE_RES_MEM(q40_isa_io_base + (PCIDE_BASE2 + PCIDE_CTL) * 4, 2),
> + DEFINE_RES_IO(PCIDE_BASE2, 8),
> + DEFINE_RES_IO(PCIDE_BASE2 + PCIDE_CTL, 1),
> + DEFINE_RES_IRQ(15),
> +};
> +
> +static __init int q40_platform_init(void)
> +{
> if (!MACH_IS_Q40)
> return -ENODEV;
>
> - pdev = platform_device_register_simple("q40kbd", -1, NULL, 0);
> - return PTR_ERR_OR_ZERO(pdev);
> + platform_device_register_simple("q40kbd", -1, NULL, 0);
> +
> + platform_device_register_simple("atari-falcon-ide", 0, q40_pata_rsrc_0,
> + ARRAY_SIZE(q40_pata_rsrc_0));
> +
> + platform_device_register_simple("atari-falcon-ide", 1, q40_pata_rsrc_1,
> + ARRAY_SIZE(q40_pata_rsrc_1));
> +
> + return 0;
> }
> -arch_initcall(q40_add_kbd_device);
> +arch_initcall(q40_platform_init);
> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> index 030cb32da980..b7a5abee2147 100644
> --- a/drivers/ata/Kconfig
> +++ b/drivers/ata/Kconfig
> @@ -1015,11 +1015,11 @@ config PATA_CMD640_PCI
> If unsure, say N.
>
> config PATA_FALCON
> - tristate "Atari Falcon PATA support"
> - depends on M68K && ATARI
> + tristate "Atari Falcon and Q40/Q60 PATA support"
> + depends on M68K && (ATARI || Q40)
> help
> This option enables support for the on-board IDE
> - interface on the Atari Falcon.
> + interface on the Atari Falcon and Q40/Q60.
>
> If unsure, say N.
>
> diff --git a/drivers/ata/pata_falcon.c b/drivers/ata/pata_falcon.c
> index 27b0952fde6b..9d0dd8f4c21c 100644
> --- a/drivers/ata/pata_falcon.c
> +++ b/drivers/ata/pata_falcon.c
> @@ -33,8 +33,6 @@
> #define DRV_NAME "pata_falcon"
> #define DRV_VERSION "0.1.0"
>
> -#define ATA_HD_CONTROL 0x39
> -
> static struct scsi_host_template pata_falcon_sht = {
> ATA_PIO_SHT(DRV_NAME),
> };
> @@ -121,23 +119,42 @@ static struct ata_port_operations pata_falcon_ops = {
>
> static int __init pata_falcon_init_one(struct platform_device *pdev)
> {
> - struct resource *res;
> + struct resource *base_mem_res, *ctl_mem_res;
> + struct resource *base_res, *ctl_res, *irq_res;
> struct ata_host *host;
> struct ata_port *ap;
> void __iomem *base;
> + int irq = 0;
>
> - dev_info(&pdev->dev, "Atari Falcon PATA controller\n");
> + dev_info(&pdev->dev, "Atari Falcon and Q40/Q60 PATA controller\n");
>
> - res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> - if (!res)
> - return -ENODEV;
> + base_res = platform_get_resource(pdev, IORESOURCE_IO, 0);
> + if (base_res && !devm_request_region(&pdev->dev, base_res->start,
> + resource_size(base_res), DRV_NAME)) {
> + dev_err(&pdev->dev, "resources busy\n");
> + return -EBUSY;
> + }
>
> - if (!devm_request_mem_region(&pdev->dev, res->start,
> - resource_size(res), DRV_NAME)) {
> + ctl_res = platform_get_resource(pdev, IORESOURCE_IO, 1);
> + if (ctl_res && !devm_request_region(&pdev->dev, ctl_res->start,
> + resource_size(ctl_res), DRV_NAME)) {
> dev_err(&pdev->dev, "resources busy\n");
> return -EBUSY;
> }
>
> + base_mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!base_mem_res)
> + return -ENODEV;
> + if (!devm_request_mem_region(&pdev->dev, base_mem_res->start,
> + resource_size(base_mem_res), DRV_NAME)) {
> + dev_err(&pdev->dev, "resources busy\n");
> + return -EBUSY;
> + }
> +
> + ctl_mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> + if (!ctl_mem_res)
> + return -ENODEV;
> +
> /* allocate host */
> host = ata_host_alloc(&pdev->dev, 1);
> if (!host)
> @@ -147,10 +164,10 @@ static int __init pata_falcon_init_one(struct platform_device *pdev)
> ap->ops = &pata_falcon_ops;
> ap->pio_mask = ATA_PIO4;
> ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
> - ap->flags |= ATA_FLAG_PIO_POLLING;
>
> - base = (void __iomem *)res->start;
> - ap->ioaddr.data_addr = base;
> + base = (void __iomem *)base_mem_res->start;
> + /* N.B. this assumes data_addr will be used for word-sized I/O only */
> + ap->ioaddr.data_addr = base + 0 + 0 * 4;
> ap->ioaddr.error_addr = base + 1 + 1 * 4;
> ap->ioaddr.feature_addr = base + 1 + 1 * 4;
> ap->ioaddr.nsect_addr = base + 1 + 2 * 4;
> @@ -161,14 +178,25 @@ static int __init pata_falcon_init_one(struct platform_device *pdev)
> ap->ioaddr.status_addr = base + 1 + 7 * 4;
> ap->ioaddr.command_addr = base + 1 + 7 * 4;
>
> - ap->ioaddr.altstatus_addr = base + ATA_HD_CONTROL;
> - ap->ioaddr.ctl_addr = base + ATA_HD_CONTROL;
> + base = (void __iomem *)ctl_mem_res->start;
> + ap->ioaddr.altstatus_addr = base + 1;
> + ap->ioaddr.ctl_addr = base + 1;
>
> - ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", (unsigned long)base,
> - (unsigned long)base + ATA_HD_CONTROL);
> + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx",
> + (unsigned long)base_mem_res->start,
> + (unsigned long)ctl_mem_res->start);
> +
> + irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> + if (irq_res && irq_res->start > 0) {
> + irq = irq_res->start;
> + } else {
> + ap->flags |= ATA_FLAG_PIO_POLLING;
> + ata_port_desc(ap, "no IRQ, using PIO polling");
> + }
>
> /* activate */
> - return ata_host_activate(host, 0, NULL, 0, &pata_falcon_sht);
> + return ata_host_activate(host, irq, irq ? ata_sff_interrupt : NULL,
> + IRQF_SHARED, &pata_falcon_sht);
> }
>
> static int __exit pata_falcon_remove_one(struct platform_device *pdev)
> diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
> index 8ce4a5878d0c..8af1ac69e5f8 100644
> --- a/drivers/ide/Kconfig
> +++ b/drivers/ide/Kconfig
> @@ -731,21 +731,13 @@ config BLK_DEV_BUDDHA
> to one of its IDE interfaces.
>
> config BLK_DEV_FALCON_IDE
> - tristate "Falcon IDE interface support"
> - depends on ATARI
> + tristate "Falcon and Q40/Q60 IDE interface support"
> + depends on ATARI || Q40
> help
> This is the IDE driver for the on-board IDE interface on the Atari
> - Falcon. Say Y if you have a Falcon and want to use IDE devices (hard
> - disks, CD-ROM drives, etc.) that are connected to the on-board IDE
> - interface.
> -
> -config BLK_DEV_Q40IDE
> - tristate "Q40/Q60 IDE interface support"
> - depends on Q40
> - help
> - Enable the on-board IDE controller in the Q40/Q60. This should
> - normally be on; disable it only if you are running a custom hard
> - drive subsystem through an expansion card.
> + Falcon and Q40/Q60. Say Y if you have such a machine and want to use
> + IDE devices (hard disks, CD-ROM drives, etc.) that are connected to
> + the on-board IDE interface.
>
> config BLK_DEV_PALMCHIP_BK3710
> tristate "Palmchip bk3710 IDE controller support"
> diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
> index 45a1c0463bed..991eb72a786b 100644
> --- a/drivers/ide/Makefile
> +++ b/drivers/ide/Makefile
> @@ -29,7 +29,6 @@ obj-$(CONFIG_BLK_DEV_4DRIVES) += ide-4drives.o
>
> obj-$(CONFIG_BLK_DEV_GAYLE) += gayle.o
> obj-$(CONFIG_BLK_DEV_FALCON_IDE) += falconide.o
> -obj-$(CONFIG_BLK_DEV_Q40IDE) += q40ide.o
> obj-$(CONFIG_BLK_DEV_BUDDHA) += buddha.o
>
> obj-$(CONFIG_BLK_DEV_AEC62XX) += aec62xx.o
> diff --git a/drivers/ide/falconide.c b/drivers/ide/falconide.c
> index bb86d84558d9..fce68412b3c9 100644
> --- a/drivers/ide/falconide.c
> +++ b/drivers/ide/falconide.c
> @@ -25,12 +25,6 @@
>
> #define DRV_NAME "falconide"
>
> - /*
> - * Offsets from base address
> - */
> -
> -#define ATA_HD_CONTROL 0x39
> -
> /*
> * falconide_intr_lock is used to obtain access to the IDE interrupt,
> * which is shared between several drivers.
> @@ -107,7 +101,8 @@ static const struct ide_port_info falconide_port_info = {
> .chipset = ide_generic,
> };
>
> -static void __init falconide_setup_ports(struct ide_hw *hw, unsigned long base)
> +static void __init falconide_setup_ports(struct ide_hw *hw, unsigned long base,
> + unsigned long ctl, int irq)
> {
> int i;
>
> @@ -118,9 +113,9 @@ static void __init falconide_setup_ports(struct ide_hw *hw, unsigned long base)
> for (i = 1; i < 8; i++)
> hw->io_ports_array[i] = base + 1 + i * 4;
>
> - hw->io_ports.ctl_addr = base + ATA_HD_CONTROL;
> + hw->io_ports.ctl_addr = ctl + 1;
>
> - hw->irq = IRQ_MFP_IDE;
> + hw->irq = irq;
> }
>
> /*
> @@ -129,37 +124,69 @@ static void __init falconide_setup_ports(struct ide_hw *hw, unsigned long base)
>
> static int __init falconide_init(struct platform_device *pdev)
> {
> - struct resource *res;
> + struct resource *base_mem_res, *ctl_mem_res;
> + struct resource *base_res, *ctl_res, *irq_res;
> struct ide_host *host;
> struct ide_hw hw, *hws[] = { &hw };
> - unsigned long base;
> int rc;
> + int irq;
> +
> + dev_info(&pdev->dev, "Atari Falcon and Q40/Q60 IDE controller\n");
> +
> + base_res = platform_get_resource(pdev, IORESOURCE_IO, 0);
> + if (base_res && !devm_request_region(&pdev->dev, base_res->start,
> + resource_size(base_res), DRV_NAME)) {
> + dev_err(&pdev->dev, "resources busy\n");
> + return -EBUSY;
> + }
>
> - dev_info(&pdev->dev, "Atari Falcon IDE controller\n");
> + ctl_res = platform_get_resource(pdev, IORESOURCE_IO, 0);
> + if (ctl_res && !devm_request_region(&pdev->dev, ctl_res->start,
> + resource_size(ctl_res), DRV_NAME)) {
> + dev_err(&pdev->dev, "resources busy\n");
> + return -EBUSY;
> + }
>
> - res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> - if (!res)
> + base_mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!base_mem_res)
> return -ENODEV;
>
> - if (!devm_request_mem_region(&pdev->dev, res->start,
> - resource_size(res), DRV_NAME)) {
> + if (!devm_request_mem_region(&pdev->dev, base_mem_res->start,
> + resource_size(base_mem_res), DRV_NAME)) {
> dev_err(&pdev->dev, "resources busy\n");
> return -EBUSY;
> }
>
> - base = (unsigned long)res->start;
> + ctl_mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> + if (!ctl_mem_res)
> + return -ENODEV;
> +
> + if (MACH_IS_ATARI) {
> + irq = IRQ_MFP_IDE;
> + } else {
> + irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> + if (irq_res && irq_res->start > 0)
> + irq = irq_res->start;
> + else
> + return -ENODEV;
> + }
>
> - falconide_setup_ports(&hw, base);
> + falconide_setup_ports(&hw, base_mem_res->start, ctl_mem_res->start, irq);
>
> host = ide_host_alloc(&falconide_port_info, hws, 1);
> - if (host == NULL) {
> - rc = -ENOMEM;
> - goto err;
> + if (!host)
> + return -ENOMEM;
> +
> + if (!MACH_IS_ATARI) {
> + host->get_lock = NULL;
> + host->release_lock = NULL;
> }
>
> - falconide_get_lock(NULL, NULL);
> + if (host->get_lock)
> + host->get_lock(NULL, NULL);
> rc = ide_host_register(host, &falconide_port_info, hws);
> - falconide_release_lock();
> + if (host->release_lock)
> + host->release_lock();
>
> if (rc)
> goto err_free;
> @@ -168,8 +195,6 @@ static int __init falconide_init(struct platform_device *pdev)
> return 0;
> err_free:
> ide_host_free(host);
> -err:
> - release_mem_region(res->start, resource_size(res));
> return rc;
> }
>
> diff --git a/drivers/ide/q40ide.c b/drivers/ide/q40ide.c
> deleted file mode 100644
> index ecd0a69245f6..000000000000
> --- a/drivers/ide/q40ide.c
> +++ /dev/null
> @@ -1,168 +0,0 @@
> -/*
> - * Q40 I/O port IDE Driver
> - *
> - * (c) Richard Zidlicky
> - *
> - * This file is subject to the terms and conditions of the GNU General Public
> - * License. See the file COPYING in the main directory of this archive for
> - * more details.
> - *
> - *
> - */
> -
> -#include <linux/types.h>
> -#include <linux/mm.h>
> -#include <linux/interrupt.h>
> -#include <linux/blkdev.h>
> -#include <linux/ide.h>
> -#include <linux/module.h>
> -
> -#include <asm/ide.h>
> -
> - /*
> - * Bases of the IDE interfaces
> - */
> -
> -#define Q40IDE_NUM_HWIFS 2
> -
> -#define PCIDE_BASE1 0x1f0
> -#define PCIDE_BASE2 0x170
> -#define PCIDE_BASE3 0x1e8
> -#define PCIDE_BASE4 0x168
> -#define PCIDE_BASE5 0x1e0
> -#define PCIDE_BASE6 0x160
> -
> -static const unsigned long pcide_bases[Q40IDE_NUM_HWIFS] = {
> - PCIDE_BASE1, PCIDE_BASE2, /* PCIDE_BASE3, PCIDE_BASE4 , PCIDE_BASE5,
> - PCIDE_BASE6 */
> -};
> -
> -static int q40ide_default_irq(unsigned long base)
> -{
> - switch (base) {
> - case 0x1f0: return 14;
> - case 0x170: return 15;
> - case 0x1e8: return 11;
> - default:
> - return 0;
> - }
> -}
> -
> -
> -/*
> - * Addresses are pretranslated for Q40 ISA access.
> - */
> -static void q40_ide_setup_ports(struct ide_hw *hw, unsigned long base, int irq)
> -{
> - memset(hw, 0, sizeof(*hw));
> - /* BIG FAT WARNING:
> - assumption: only DATA port is ever used in 16 bit mode */
> - hw->io_ports.data_addr = Q40_ISA_IO_W(base);
> - hw->io_ports.error_addr = Q40_ISA_IO_B(base + 1);
> - hw->io_ports.nsect_addr = Q40_ISA_IO_B(base + 2);
> - hw->io_ports.lbal_addr = Q40_ISA_IO_B(base + 3);
> - hw->io_ports.lbam_addr = Q40_ISA_IO_B(base + 4);
> - hw->io_ports.lbah_addr = Q40_ISA_IO_B(base + 5);
> - hw->io_ports.device_addr = Q40_ISA_IO_B(base + 6);
> - hw->io_ports.status_addr = Q40_ISA_IO_B(base + 7);
> - hw->io_ports.ctl_addr = Q40_ISA_IO_B(base + 0x206);
> -
> - hw->irq = irq;
> -}
> -
> -static void q40ide_input_data(ide_drive_t *drive, struct ide_cmd *cmd,
> - void *buf, unsigned int len)
> -{
> - unsigned long data_addr = drive->hwif->io_ports.data_addr;
> -
> - if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) {
> - __ide_mm_insw(data_addr, buf, (len + 1) / 2);
> - return;
> - }
> -
> - raw_insw_swapw((u16 *)data_addr, buf, (len + 1) / 2);
> -}
> -
> -static void q40ide_output_data(ide_drive_t *drive, struct ide_cmd *cmd,
> - void *buf, unsigned int len)
> -{
> - unsigned long data_addr = drive->hwif->io_ports.data_addr;
> -
> - if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) {
> - __ide_mm_outsw(data_addr, buf, (len + 1) / 2);
> - return;
> - }
> -
> - raw_outsw_swapw((u16 *)data_addr, buf, (len + 1) / 2);
> -}
> -
> -/* Q40 has a byte-swapped IDE interface */
> -static const struct ide_tp_ops q40ide_tp_ops = {
> - .exec_command = ide_exec_command,
> - .read_status = ide_read_status,
> - .read_altstatus = ide_read_altstatus,
> - .write_devctl = ide_write_devctl,
> -
> - .dev_select = ide_dev_select,
> - .tf_load = ide_tf_load,
> - .tf_read = ide_tf_read,
> -
> - .input_data = q40ide_input_data,
> - .output_data = q40ide_output_data,
> -};
> -
> -static const struct ide_port_info q40ide_port_info = {
> - .tp_ops = &q40ide_tp_ops,
> - .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
> - .irq_flags = IRQF_SHARED,
> - .chipset = ide_generic,
> -};
> -
> -/*
> - * the static array is needed to have the name reported in /proc/ioports,
> - * hwif->name unfortunately isn't available yet
> - */
> -static const char *q40_ide_names[Q40IDE_NUM_HWIFS]={
> - "ide0", "ide1"
> -};
> -
> -/*
> - * Probe for Q40 IDE interfaces
> - */
> -
> -static int __init q40ide_init(void)
> -{
> - int i;
> - struct ide_hw hw[Q40IDE_NUM_HWIFS], *hws[] = { NULL, NULL };
> -
> - if (!MACH_IS_Q40)
> - return -ENODEV;
> -
> - printk(KERN_INFO "ide: Q40 IDE controller\n");
> -
> - for (i = 0; i < Q40IDE_NUM_HWIFS; i++) {
> - const char *name = q40_ide_names[i];
> -
> - if (!request_region(pcide_bases[i], 8, name)) {
> - printk("could not reserve ports %lx-%lx for %s\n",
> - pcide_bases[i],pcide_bases[i]+8,name);
> - continue;
> - }
> - if (!request_region(pcide_bases[i]+0x206, 1, name)) {
> - printk("could not reserve port %lx for %s\n",
> - pcide_bases[i]+0x206,name);
> - release_region(pcide_bases[i], 8);
> - continue;
> - }
> - q40_ide_setup_ports(&hw[i], pcide_bases[i],
> - q40ide_default_irq(pcide_bases[i]));
> -
> - hws[i] = &hw[i];
> - }
> -
> - return ide_host_add(&q40ide_port_info, hws, Q40IDE_NUM_HWIFS, NULL);
> -}
> -
> -module_init(q40ide_init);
> -
> -MODULE_LICENSE("GPL");
>
On Mon, 7 Jun 2021, Michael Schmitz wrote:
> Hi Finn,
>
> are there any substantial changes from what I'd tested before?
The request_region() stuff is new, and I reworked the host->get_lock and
host->release_lock changes. So you may want to review it again.
> Your patch conflicts with (I think) the Mac IDE patches now in Geert's
> tree, and I'd rather avoid hand-patching the lot if at all possible:
>
> m68k_q40_Replace_q40ide_with_pata_falcon_and_falconide
> Applying: m68k/q40: Replace q40ide with pata_falcon and falconide
> error: patch failed: arch/m68k/configs/multi_defconfig:351
> error: arch/m68k/configs/multi_defconfig: patch does not apply
> error: patch failed: drivers/ide/Kconfig:731
> error: drivers/ide/Kconfig: patch does not apply
> error: patch failed: drivers/ide/Makefile:29
> error: drivers/ide/Makefile: patch does not apply
>
I should have sent these as a two-part series. Sorry about that.
You'll need to apply this patch first:
https://lore.kernel.org/linux-ide/[email protected]/T/
> What's your baseline for this patch?
>
I've used v5.12 and v5.13-rc5, but mostly I develop on the mac68k branch
in my github repository.
> (In the alternative: just add my Tested-by if nothing changed aside from the
> IO region reservation)
>
I have tested these patches in Aranym (including a multi-platform
atari/q40 build which required your ISA fix) but I don't have any way to
test the q40-only code.
Hi Finn
Am 07.06.2021 um 14:07 schrieb Finn Thain:
>> are there any substantial changes from what I'd tested before?
>
> The request_region() stuff is new, and I reworked the host->get_lock and
> host->release_lock changes. So you may want to review it again.
I'll do that (and test the old falconide driver with your patch - never
got around to that, and I now remember there was something fishy in that
driver in relation to registering the IDE interrupt that I need to
re-check).
>
>> Your patch conflicts with (I think) the Mac IDE patches now in Geert's
>> tree, and I'd rather avoid hand-patching the lot if at all possible:
>>
>> m68k_q40_Replace_q40ide_with_pata_falcon_and_falconide
>> Applying: m68k/q40: Replace q40ide with pata_falcon and falconide
>> error: patch failed: arch/m68k/configs/multi_defconfig:351
>> error: arch/m68k/configs/multi_defconfig: patch does not apply
>> error: patch failed: drivers/ide/Kconfig:731
>> error: drivers/ide/Kconfig: patch does not apply
>> error: patch failed: drivers/ide/Makefile:29
>> error: drivers/ide/Makefile: patch does not apply
>>
>
> I should have sent these as a two-part series. Sorry about that.
> You'll need to apply this patch first:
> https://lore.kernel.org/linux-ide/[email protected]/T/
Looks like that's commit e4ab3dc4eb88f53730061a3976c1e63523c5567d which
fixed the conflict for me, thanks.
>
>> What's your baseline for this patch?
>>
>
> I've used v5.12 and v5.13-rc5, but mostly I develop on the mac68k branch
> in my github repository.
>
>> (In the alternative: just add my Tested-by if nothing changed aside from the
>> IO region reservation)
>>
>
> I have tested these patches in Aranym (including a multi-platform
> atari/q40 build which required your ISA fix) but I don't have any way to
> test the q40-only code.
>
Neither have I, but I'd like to verify that the falconide driver still
works with SCSI after this patch (can't see from the diff what the
ramifications are for locking and request_irq() ... as I said, I
remember something odd about the IDE interrupt that I need to verify).
Cheers,
Michael
Hi Finn,
Am 07.06.2021 um 14:07 schrieb Finn Thain:
> On Mon, 7 Jun 2021, Michael Schmitz wrote:
>
>> Hi Finn,
>>
>> are there any substantial changes from what I'd tested before?
>
> The request_region() stuff is new, and I reworked the host->get_lock and
> host->release_lock changes. So you may want to review it again.
Done that - the weirdness around request_irq() that I remembered is not
actually an issue, that's taken care of by setting host->get_lock. And
your patch doesn't change anything for Falcon.
Tested on my Falcon - I can still use both IDE and SCSI (no stress test
done but I doubt it would turn out much different).
Not setting host->get_lock on Q40 will correctly request the IRQ for IDE
there, the same lowlevel IO routines can be shared by both, and there
wasn't ever much more that these old drivers did.
Please add my Reviewed-by as well as Tested-by.
Cheers,
Michael
>> Your patch conflicts with (I think) the Mac IDE patches now in Geert's
>> tree, and I'd rather avoid hand-patching the lot if at all possible:
>>
>> m68k_q40_Replace_q40ide_with_pata_falcon_and_falconide
>> Applying: m68k/q40: Replace q40ide with pata_falcon and falconide
>> error: patch failed: arch/m68k/configs/multi_defconfig:351
>> error: arch/m68k/configs/multi_defconfig: patch does not apply
>> error: patch failed: drivers/ide/Kconfig:731
>> error: drivers/ide/Kconfig: patch does not apply
>> error: patch failed: drivers/ide/Makefile:29
>> error: drivers/ide/Makefile: patch does not apply
>>
>
> I should have sent these as a two-part series. Sorry about that.
> You'll need to apply this patch first:
> https://lore.kernel.org/linux-ide/[email protected]/T/
>
>> What's your baseline for this patch?
>>
>
> I've used v5.12 and v5.13-rc5, but mostly I develop on the mac68k branch
> in my github repository.
>
>> (In the alternative: just add my Tested-by if nothing changed aside from the
>> IO region reservation)
>>
>
> I have tested these patches in Aranym (including a multi-platform
> atari/q40 build which required your ISA fix) but I don't have any way to
> test the q40-only code.
>