Add the Blueridge and Fuji BMC systems. Document many missing FSI related
properties, and fix existing warnings. Make some minor fixes in OCC and
SCOM drivers for the updated bindings.
Changes since v2:
- Split up the DTS patches
- Add documentation patches
Changes since v3:
- Remove references to fsi.txt
- Change ibm,p10-spi to ibm,spi-fsi
- Change ibm,fsi2pib to ibm,p9-scom
- Change ibm,hub-fsi-controller to ibm,p9-fsi-controller
- Fix warnings
- Fix formatting
- Add device driver fixes
Eddie James (17):
dt-bindings: spi: Document the IBM FSI-attached SPI controller
dt-bindings: fsi: fsi2spi: Document SPI controller child nodes
dt-bindings: fsi: Document the IBM SCOM engine
dt-bindings: fsi: p9-occ: Convert to json-schema
dt-bindings: fsi: Document the IBM SBEFIFO engine
dt-bindings: fsi: Document the FSI controller common properties
dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller
dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema
dt-bindings: fsi: Document the FSI Hub Controller
dt-bindings: i2c: i2c-fsi: Convert to json-schema
dt-bindings: arm: aspeed: add IBM P11 BMC boards
ARM: dts: aspeed: Add IBM P11 FSI devices
ARM: dts: aspeed: Add IBM P11 Blueridge BMC system
ARM: dts: aspeed: Add IBM P11 Fuji BMC system
fsi: occ: Get device number from FSI minor number API
fsi: occ: Find next available child rather than node name match
fsi: scom: Update compatible string to match documentation
.../bindings/arm/aspeed/aspeed.yaml | 2 +
.../fsi/aspeed,ast2600-fsi-master.yaml | 81 +
.../bindings/fsi/fsi-controller.yaml | 66 +
.../bindings/fsi/fsi-master-aspeed.txt | 36 -
.../devicetree/bindings/fsi/ibm,fsi2spi.yaml | 36 +-
.../bindings/fsi/ibm,i2cr-fsi-master.yaml | 5 +-
.../bindings/fsi/ibm,p9-fsi-controller.yaml | 45 +
.../devicetree/bindings/fsi/ibm,p9-occ.txt | 16 -
.../devicetree/bindings/fsi/ibm,p9-occ.yaml | 41 +
.../bindings/fsi/ibm,p9-sbefifo.yaml | 51 +
.../devicetree/bindings/fsi/ibm,p9-scom.yaml | 37 +
.../devicetree/bindings/i2c/i2c-fsi.txt | 40 -
.../devicetree/bindings/i2c/ibm,i2c-fsi.yaml | 58 +
.../devicetree/bindings/spi/ibm,spi-fsi.yaml | 55 +
MAINTAINERS | 2 +-
arch/arm/boot/dts/aspeed/Makefile | 2 +
.../dts/aspeed/aspeed-bmc-ibm-blueridge.dts | 1689 +++++++
.../boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts | 3877 +++++++++++++++++
.../arm/boot/dts/aspeed/ibm-power11-quad.dtsi | 1538 +++++++
drivers/fsi/fsi-occ.c | 49 +-
drivers/fsi/fsi-scom.c | 2 +-
21 files changed, 7590 insertions(+), 138 deletions(-)
create mode 100644 Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
create mode 100644 Documentation/devicetree/bindings/fsi/fsi-controller.yaml
delete mode 100644 Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-fsi-controller.yaml
delete mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml
create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.yaml
create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-scom.yaml
delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-fsi.txt
create mode 100644 Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml
create mode 100644 Documentation/devicetree/bindings/spi/ibm,spi-fsi.yaml
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts
create mode 100644 arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi
--
2.39.3
Since there are multiple FSI controllers documented, the common
properties should be documented separately and then referenced
from the specific controller documentation.
Signed-off-by: Eddie James <[email protected]>
---
Changes since v3:
- Add chip-id description
- Use a real compatible
- Re-order example properties
.../bindings/fsi/fsi-controller.yaml | 66 +++++++++++++++++++
1 file changed, 66 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fsi/fsi-controller.yaml
diff --git a/Documentation/devicetree/bindings/fsi/fsi-controller.yaml b/Documentation/devicetree/bindings/fsi/fsi-controller.yaml
new file mode 100644
index 000000000000..fd624181c030
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/fsi-controller.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/fsi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FSI Controller Common Properties
+
+maintainers:
+ - Eddie James <[email protected]>
+
+description:
+ FSI (FRU (Field Replaceable Unit) Service Interface) is a two wire bus. The
+ FSI bus is connected to a CFAM (Common FRU Access Macro) which contains
+ various engines such as I2C controllers, SPI controllers, etc.
+
+properties:
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 0
+
+ no-scan-on-init:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The FSI controller cannot scan the bus during initialization.
+
+patternProperties:
+ "cfam@[0-9a-f],[0-9a-f]":
+ type: object
+ properties:
+ chip-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Processor index
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ required:
+ - reg
+
+ additionalProperties: true
+
+additionalProperties: true
+
+examples:
+ - |
+ fsi {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+ };
+ };
--
2.39.3
The FSI2SPI bridge has several SPI controllers behind it, which
should be documented. Also, therefore the node needs to specify
address and size cells.
Signed-off-by: Eddie James <[email protected]>
---
.../devicetree/bindings/fsi/ibm,fsi2spi.yaml | 36 ++++++++++++++++---
1 file changed, 32 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml
index e2ca0b000471..ad5c83f48425 100644
--- a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml
+++ b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml
@@ -9,11 +9,10 @@ title: IBM FSI-attached SPI controllers
maintainers:
- Eddie James <[email protected]>
-description: |
+description:
This binding describes an FSI CFAM engine called the FSI2SPI. Therefore this
- node will always be a child of an FSI CFAM node; see fsi.txt for details on
- FSI slave and CFAM nodes. This FSI2SPI engine provides access to a number of
- SPI controllers.
+ node will always be a child of an FSI CFAM node. This FSI2SPI engine provides
+ access to a number of SPI controllers.
properties:
compatible:
@@ -24,6 +23,17 @@ properties:
items:
- description: FSI slave address
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^spi@[0-9a-f]+$":
+ type: object
+ $ref: /schemas/spi/ibm,spi-fsi.yaml
+
required:
- compatible
- reg
@@ -35,4 +45,22 @@ examples:
fsi2spi@1c00 {
compatible = "ibm,fsi2spi";
reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
};
--
2.39.3
The SCOM engine provides an interface to the POWER processor PIB
(Pervasive Interconnect Bus).
Signed-off-by: Eddie James <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
---
Changes since v3:
- Change name to ibm,p9-scom from ibm,fsi2pib to be more specific.
.../devicetree/bindings/fsi/ibm,p9-scom.yaml | 37 +++++++++++++++++++
1 file changed, 37 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-scom.yaml
diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-scom.yaml b/Documentation/devicetree/bindings/fsi/ibm,p9-scom.yaml
new file mode 100644
index 000000000000..8cd14a70bedf
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/ibm,p9-scom.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,p9-scom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached SCOM engine
+
+maintainers:
+ - Eddie James <[email protected]>
+
+description:
+ The SCOM engine is an interface to the POWER processor PIB (Pervasive
+ Interconnect Bus). This node will always be a child of an FSI CFAM node.
+
+properties:
+ compatible:
+ enum:
+ - ibm,p9-scom
+ - ibm,i2cr-scom
+
+ reg:
+ items:
+ - description: FSI slave address
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ scom@1000 {
+ compatible = "ibm,p9-scom";
+ reg = <0x1000 0x400>;
+ };
--
2.39.3
Remove the common properties from the I2CR documentation and instead
point to the common FSI controller documentation.
Signed-off-by: Eddie James <[email protected]>
---
Changes since v3:
- Re-order allOf to below required
.../devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml b/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml
index 442cecdc57cb..e49ace3ca339 100644
--- a/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml
+++ b/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml
@@ -26,7 +26,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: fsi-controller.yaml#
+
+unevaluatedProperties: false
examples:
- |
--
2.39.3
Conver to json-schema for the OCC documentation. Also document the fact
that the OCC "bridge" device will often have the hwmon node as a
child.
Signed-off-by: Eddie James <[email protected]>
---
Changes since v3:
- Move required below other properties
- Drop "occ-" in child node
- Drop hwmon unit address
- Complete example
- Change commit message to match similar commits
.../devicetree/bindings/fsi/ibm,p9-occ.txt | 16 --------
.../devicetree/bindings/fsi/ibm,p9-occ.yaml | 41 +++++++++++++++++++
2 files changed, 41 insertions(+), 16 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml
diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
deleted file mode 100644
index e73358075a90..000000000000
--- a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Device-tree bindings for FSI-attached POWER9/POWER10 On-Chip Controller (OCC)
------------------------------------------------------------------------------
-
-This is the binding for the P9 or P10 On-Chip Controller accessed over FSI from
-a service processor. See fsi.txt for details on bindings for FSI slave and CFAM
-nodes. The OCC is not an FSI slave device itself, rather it is accessed
-through the SBE FIFO.
-
-Required properties:
- - compatible = "ibm,p9-occ" or "ibm,p10-occ"
-
-Examples:
-
- occ {
- compatible = "ibm,p9-occ";
- };
diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml
new file mode 100644
index 000000000000..3ab2582cb8a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,p9-occ.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached On-Chip Controller (OCC)
+
+maintainers:
+ - Eddie James <[email protected]>
+
+description:
+ The POWER processor On-Chip Controller (OCC) helps manage power and
+ thermals for the system, accessed through the FSI-attached SBEFIFO
+ from a service processor.
+
+properties:
+ compatible:
+ enum:
+ - ibm,p9-occ
+ - ibm,p10-occ
+
+patternProperties:
+ "^hwmon":
+ type: object
+ $ref: /schemas/hwmon/ibm,occ-hwmon.yaml
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ occ {
+ compatible = "ibm,p9-occ";
+
+ hwmon {
+ compatible = "ibm,p9-occ-hwmon";
+ };
+ };
--
2.39.3
Document the FSI Hub Controller CFAM engine.
Signed-off-by: Eddie James <[email protected]>
---
Changes since v3:
- Change name from ibm,hub-fsi-controller to ibm,p9-fsi-controller
.../bindings/fsi/ibm,p9-fsi-controller.yaml | 45 +++++++++++++++++++
1 file changed, 45 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-fsi-controller.yaml
diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-fsi-controller.yaml b/Documentation/devicetree/bindings/fsi/ibm,p9-fsi-controller.yaml
new file mode 100644
index 000000000000..29ea80ff915e
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/ibm,p9-fsi-controller.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,p9-fsi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached FSI Hub Controller
+
+maintainers:
+ - Eddie James <[email protected]>
+
+description:
+ The FSI Hub Controller is an FSI controller, providing a number of FSI links,
+ located on a CFAM. Therefore this node will always be a child of an FSI CFAM
+ node.
+
+properties:
+ compatible:
+ enum:
+ - ibm,p9-fsi-controller
+
+ reg:
+ items:
+ - description: FSI slave address
+
+allOf:
+ - $ref: fsi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ fsi@3400 {
+ compatible = "ibm,p9-fsi-controller";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+ };
+ };
--
2.39.3
Use p9-scom instead of fsi2pib.
Signed-off-by: Eddie James <[email protected]>
---
drivers/fsi/fsi-scom.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/fsi/fsi-scom.c b/drivers/fsi/fsi-scom.c
index 61dbda9dbe2b..18ca213fdc7e 100644
--- a/drivers/fsi/fsi-scom.c
+++ b/drivers/fsi/fsi-scom.c
@@ -589,7 +589,7 @@ static int scom_remove(struct device *dev)
}
static const struct of_device_id scom_of_ids[] = {
- { .compatible = "ibm,fsi2pib" },
+ { .compatible = "ibm,p9-scom" },
{ }
};
MODULE_DEVICE_TABLE(of, scom_of_ids);
--
2.39.3
Remove the IDA indexing for OCC devices and instead use the FSI
minor number API. This will make the OCC numbering consistent
with other FSI engines and make the "reg" device tree property
unnecessary.
Signed-off-by: Eddie James <[email protected]>
---
drivers/fsi/fsi-occ.c | 47 +++++++++----------------------------------
1 file changed, 9 insertions(+), 38 deletions(-)
diff --git a/drivers/fsi/fsi-occ.c b/drivers/fsi/fsi-occ.c
index da35ca9e84a6..2023355b3980 100644
--- a/drivers/fsi/fsi-occ.c
+++ b/drivers/fsi/fsi-occ.c
@@ -4,9 +4,9 @@
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/fs.h>
+#include <linux/fsi.h>
#include <linux/fsi-sbefifo.h>
#include <linux/gfp.h>
-#include <linux/idr.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/miscdevice.h>
@@ -44,6 +44,7 @@ struct occ {
struct device *sbefifo;
char name[32];
int idx;
+ dev_t devt;
bool platform_hwmon;
u8 sequence_number;
void *buffer;
@@ -75,8 +76,6 @@ struct occ_client {
#define to_client(x) container_of((x), struct occ_client, xfr)
-static DEFINE_IDA(occ_ida);
-
static int occ_open(struct inode *inode, struct file *file)
{
struct occ_client *client = kzalloc(sizeof(*client), GFP_KERNEL);
@@ -622,7 +621,6 @@ static int occ_unregister_of_child(struct device *dev, void *data)
static int occ_probe(struct platform_device *pdev)
{
int rc;
- u32 reg;
char child_name[32];
struct occ *occ;
struct platform_device *hwmon_dev = NULL;
@@ -637,6 +635,10 @@ static int occ_probe(struct platform_device *pdev)
if (!occ)
return -ENOMEM;
+ rc = fsi_get_new_minor(to_fsi_dev(dev->parent), fsi_dev_occ, &occ->devt, &occ->idx);
+ if (rc)
+ return rc;
+
/* SBE words are always four bytes */
occ->buffer = kvmalloc(OCC_MAX_RESP_WORDS * 4, GFP_KERNEL);
if (!occ->buffer)
@@ -651,24 +653,6 @@ static int occ_probe(struct platform_device *pdev)
*/
occ->sequence_number = (u8)((jiffies % 0xff) + 1);
mutex_init(&occ->occ_lock);
-
- if (dev->of_node) {
- rc = of_property_read_u32(dev->of_node, "reg", ®);
- if (!rc) {
- /* make sure we don't have a duplicate from dts */
- occ->idx = ida_simple_get(&occ_ida, reg, reg + 1,
- GFP_KERNEL);
- if (occ->idx < 0)
- occ->idx = ida_simple_get(&occ_ida, 1, INT_MAX,
- GFP_KERNEL);
- } else {
- occ->idx = ida_simple_get(&occ_ida, 1, INT_MAX,
- GFP_KERNEL);
- }
- } else {
- occ->idx = ida_simple_get(&occ_ida, 1, INT_MAX, GFP_KERNEL);
- }
-
platform_set_drvdata(pdev, occ);
snprintf(occ->name, sizeof(occ->name), "occ%d", occ->idx);
@@ -680,7 +664,7 @@ static int occ_probe(struct platform_device *pdev)
rc = misc_register(&occ->mdev);
if (rc) {
dev_err(dev, "failed to register miscdevice: %d\n", rc);
- ida_simple_remove(&occ_ida, occ->idx);
+ fsi_free_minor(occ->devt);
kvfree(occ->buffer);
return rc;
}
@@ -719,7 +703,7 @@ static int occ_remove(struct platform_device *pdev)
else
device_for_each_child(&pdev->dev, NULL, occ_unregister_of_child);
- ida_simple_remove(&occ_ida, occ->idx);
+ fsi_free_minor(occ->devt);
return 0;
}
@@ -746,20 +730,7 @@ static struct platform_driver occ_driver = {
.remove = occ_remove,
};
-static int occ_init(void)
-{
- return platform_driver_register(&occ_driver);
-}
-
-static void occ_exit(void)
-{
- platform_driver_unregister(&occ_driver);
-
- ida_destroy(&occ_ida);
-}
-
-module_init(occ_init);
-module_exit(occ_exit);
+module_platform_driver(occ_driver);
MODULE_AUTHOR("Eddie James <[email protected]>");
MODULE_DESCRIPTION("BMC P9 OCC driver");
--
2.39.3
Add the device tree for the new BMC system. The Blueridge is a
P11 system with four processors.
Signed-off-by: Eddie James <[email protected]>
---
Changes since v3:
- Fix node names to be generic
- Re-order properties to be consistent
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../dts/aspeed/aspeed-bmc-ibm-blueridge.dts | 1689 +++++++++++++++++
2 files changed, 1690 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index 715106b3baa1..5eab2bdff394 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -33,6 +33,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-facebook-yamp.dtb \
aspeed-bmc-facebook-yosemitev2.dtb \
aspeed-bmc-facebook-yosemite4.dtb \
+ aspeed-bmc-ibm-blueridge.dtb \
aspeed-bmc-ibm-bonnell.dtb \
aspeed-bmc-ibm-everest.dtb \
aspeed-bmc-ibm-rainier.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts
new file mode 100644
index 000000000000..9af499b27ef1
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts
@@ -0,0 +1,1689 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include "aspeed-g6.dtsi"
+#include "ibm-power11-quad.dtsi"
+
+/ {
+ model = "Blueridge";
+ compatible = "ibm,blueridge-bmc", "aspeed,ast2600";
+
+ aliases {
+ serial4 = &uart5;
+ i2c16 = &i2c2mux0;
+ i2c17 = &i2c2mux1;
+ i2c18 = &i2c2mux2;
+ i2c19 = &i2c2mux3;
+ i2c20 = &i2c4mux0chn0;
+ i2c21 = &i2c4mux0chn1;
+ i2c22 = &i2c4mux0chn2;
+ i2c23 = &i2c5mux0chn0;
+ i2c24 = &i2c5mux0chn1;
+ i2c25 = &i2c6mux0chn0;
+ i2c26 = &i2c6mux0chn1;
+ i2c27 = &i2c6mux0chn2;
+ i2c28 = &i2c6mux0chn3;
+ i2c29 = &i2c11mux0chn0;
+ i2c30 = &i2c11mux0chn1;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ event_log: region@b3d00000 {
+ reg = <0xb3d00000 0x100000>;
+ no-map;
+ };
+
+ ramoops@b3e00000 {
+ compatible = "ramoops";
+ reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+ record-size = <0x8000>;
+ console-size = <0x8000>;
+ ftrace-size = <0x8000>;
+ pmsg-size = <0x8000>;
+ max-reason = <3>; /* KMSG_DUMP_EMERG */
+ };
+
+ /* LPC FW cycle bridge region requires natural alignment */
+ flash_memory: region@b4000000 {
+ reg = <0xb4000000 0x04000000>; /* 64M */
+ no-map;
+ };
+
+ /* VGA region is dictated by hardware strapping */
+ vga_memory: region@bf000000 {
+ compatible = "shared-dma-pool";
+ reg = <0xbf000000 0x01000000>; /* 16M */
+ no-map;
+ };
+ };
+
+ i2c-mux {
+ compatible = "i2c-mux-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-parent = <&i2c2>;
+ idle-state = <0>;
+ mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>,
+ <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
+
+ i2c2mux0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2mux1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2mux2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2mux3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ /* BMC Card fault LED at the back */
+ led-bmc-ingraham0 {
+ gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+ };
+
+ /* Enclosure ID LED at the back */
+ led-rear-enc-id0 {
+ gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ /* Enclosure fault LED at the back */
+ led-rear-enc-fault0 {
+ gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+ };
+
+ /* PCIE slot power LED */
+ led-pcieslot-power {
+ gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ poll-interval = <1000>;
+
+ event-fan0-presence {
+ gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+ label = "fan0-presence";
+ linux,code = <6>;
+ };
+
+ event-fan1-presence {
+ gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+ label = "fan1-presence";
+ linux,code = <7>;
+ };
+
+ event-fan2-presence {
+ gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
+ label = "fan2-presence";
+ linux,code = <8>;
+ };
+
+ event-fan3-presence {
+ gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
+ label = "fan3-presence";
+ linux,code = <9>;
+ };
+
+ event-fan4-presence {
+ gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
+ label = "fan4-presence";
+ linux,code = <10>;
+ };
+
+ event-fan5-presence {
+ gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
+ label = "fan5-presence";
+ linux,code = <11>;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc1 7>;
+ };
+};
+
+&adc1 {
+ status = "okay";
+ aspeed,int-vref-microvolt = <2500000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+ &pinctrl_adc10_default &pinctrl_adc11_default
+ &pinctrl_adc12_default &pinctrl_adc13_default
+ &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&gpio0 {
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "bmc-management-ready","","","","","","checkstop","",
+ /*C0-C7*/ "","","","","","","","",
+ /*D0-D7*/ "","","","","","","","",
+ /*E0-E7*/ "","","","","","","","",
+ /*F0-F7*/ "","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
+ /*G0-G7*/ "","","","","","","","",
+ /*H0-H7*/ "","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","",
+ /*I0-I7*/ "","","","","","","bmc-secure-boot","",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "","","","","","","","",
+ /*O0-O7*/ "","","","usb-power","","","","",
+ /*P0-P7*/ "","","","","pcieslot-power","","","",
+ /*Q0-Q7*/ "cfam-reset","","regulator-standby-faulted","","","","","",
+ /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
+ /*S0-S7*/ "presence-ps0","presence-ps1","presence-ps2","presence-ps3",
+ "power-ffs-sync-history","","","",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","","","","","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","","","","","","","",
+ /*Z0-Z7*/ "","","","","","","","";
+
+ i2c3-mux-oe-n-hog {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;
+ line-name = "I2C3_MUX_OE_N";
+ output-high;
+ };
+
+ usb-power-hog {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+ output-high;
+ };
+};
+
+&emmc_controller {
+ status = "okay";
+};
+
+&pinctrl_emmc_default {
+ bias-disable;
+};
+
+&emmc {
+ status = "okay";
+ clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&ibt {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ gpio@20 {
+ compatible = "ti,tca9554";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names = "",
+ "RUSSEL_FW_I2C_ENABLE_N",
+ "RUSSEL_OPPANEL_PRESENCE_N",
+ "BLYTH_OPPANEL_PRESENCE_N",
+ "CPU_TPM_CARD_PRESENT_N",
+ "DASD_BP2_PRESENT_N",
+ "DASD_BP1_PRESENT_N",
+ "DASD_BP0_PRESENT_N";
+ };
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+
+ power-supply@68 {
+ compatible = "ibm,cffps";
+ reg = <0x68>;
+ };
+
+ power-supply@69 {
+ compatible = "ibm,cffps";
+ reg = <0x69>;
+ };
+
+ led-controller@61 {
+ compatible = "nxp,pca9552";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "SLOT0_PRSNT_EN_RSVD", "SLOT1_PRSNT_EN_RSVD",
+ "SLOT2_PRSNT_EN_RSVD", "SLOT3_PRSNT_EN_RSVD",
+ "SLOT4_PRSNT_EN_RSVD", "SLOT0_EXPANDER_PRSNT_N",
+ "SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N",
+ "SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N",
+ "", "", "", "", "", "";
+ };
+};
+
+&i2c4 {
+ status = "okay";
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ temperature-sensor@49 {
+ compatible = "ti,tmp275";
+ reg = <0x49>;
+ };
+
+ temperature-sensor@4a {
+ compatible = "ti,tmp275";
+ reg = <0x4a>;
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c4mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard0-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard0-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c4mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+ };
+
+ i2c4mux0chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+ };
+ };
+};
+
+&i2c5 {
+ status = "okay";
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ temperature-sensor@49 {
+ compatible = "ti,tmp275";
+ reg = <0x49>;
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c5mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard3-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard3-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c5mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ led-controller@61 {
+ compatible = "nxp,pca9551";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard4-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard4-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+ };
+};
+
+&i2c6 {
+ status = "okay";
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ temperature-sensor@4a {
+ compatible = "ti,tmp275";
+ reg = <0x4a>;
+ };
+
+ temperature-sensor@4b {
+ compatible = "ti,tmp275";
+ reg = <0x4b>;
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c6mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+
+ i2c6mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+ };
+
+ i2c6mux0chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c6mux0chn3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+ };
+ };
+};
+
+&i2c7 {
+ multi-master;
+ status = "okay";
+
+ led-controller@30 {
+ compatible = "ibm,pca9552";
+ reg = <0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "pcieslot0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "pcieslot1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "pcieslot2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "pcieslot3";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "pcieslot4";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "cpu1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "cpu-vrm1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "lcd-russel";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ led-controller@31 {
+ compatible = "ibm,pca9552";
+ reg = <0x31>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "ddimm0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "ddimm1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "ddimm2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "ddimm3";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "ddimm4";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "ddimm5";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "ddimm6";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "ddimm7";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "ddimm8";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "ddimm9";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "ddimm10";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "ddimm11";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "ddimm12";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "ddimm13";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ reg = <14>;
+ default-state = "keep";
+ label = "ddimm14";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ reg = <15>;
+ default-state = "keep";
+ label = "ddimm15";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ led-controller@32 {
+ compatible = "ibm,pca9552";
+ reg = <0x32>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "ddimm16";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "ddimm17";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "ddimm18";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "ddimm19";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "ddimm20";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "ddimm21";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "ddimm22";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "ddimm23";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "ddimm24";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "ddimm25";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "ddimm26";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "ddimm27";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "ddimm28";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "ddimm29";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ reg = <14>;
+ default-state = "keep";
+ label = "ddimm30";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ reg = <15>;
+ default-state = "keep";
+ label = "ddimm31";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ led-controller@33 {
+ compatible = "ibm,pca9552";
+ reg = <0x33>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "planar";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cpu0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "dasd-pyramid0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "dasd-pyramid1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "dasd-pyramid2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "cpu0-vrm0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "rtc-battery";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "base-blyth";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "pcieslot6";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "pcieslot7";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "pcieslot8";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "pcieslot9";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "pcieslot10";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ reg = <14>;
+ default-state = "keep";
+ label = "pcieslot11";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ reg = <15>;
+ default-state = "keep";
+ label = "tpm-wilson";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ humidity-sensor@40 {
+ compatible = "silabs,si7020";
+ reg = <0x40>;
+ };
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ pwm@52 {
+ compatible = "maxim,max31785a";
+ reg = <0x52>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "front-sys-id0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "front-check-log0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "front-enc-fault1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "front-sys-pwron0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ pca0: led-controller@61 {
+ compatible = "nxp,pca9552";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "fan0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "fan1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "fan2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "fan3";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "fan4";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "fan5";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ lcd-controller@62 {
+ compatible = "ibm,op-panel";
+ reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+ };
+
+ pressure-sensor@76 {
+ compatible = "infineon,dps310";
+ reg = <0x76>;
+ #io-channel-cells = <0>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+};
+
+&i2c8 {
+ status = "okay";
+
+ pmic@11 {
+ compatible = "ti,ucd90320";
+ reg = <0x11>;
+ };
+
+ rtc@32 {
+ compatible = "epson,rx8900";
+ reg = <0x32>;
+ };
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ temperature-sensor@4a {
+ compatible = "ti,tmp275";
+ reg = <0x4a>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "power-config-full-load", "";
+ };
+
+ led-controller@61 {
+ compatible = "nxp,pca9552";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD",
+ "SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD",
+ "SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD",
+ "SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N",
+ "SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N",
+ "SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N",
+ "", "", "", "";
+ };
+
+};
+
+&i2c9 {
+ status = "okay";
+
+ temperature-sensor@4c {
+ compatible = "ti,tmp423";
+ reg = <0x4c>;
+ };
+
+ temperature-sensor@4d {
+ compatible = "ti,tmp423";
+ reg = <0x4d>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+
+ temperature-sensor@4c {
+ compatible = "ti,tmp423";
+ reg = <0x4c>;
+ };
+
+ temperature-sensor@4d {
+ compatible = "ti,tmp423";
+ reg = <0x4d>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ temperature-sensor@49 {
+ compatible = "ti,tmp275";
+ reg = <0x49>;
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c11mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard10-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard10-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c11mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+ };
+ };
+};
+
+&i2c12 {
+ status = "okay";
+
+ tpm@2e {
+ compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+ reg = <0x2e>;
+ memory-region = <&event_log>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&i2c13 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "nvme0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "nvme1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "nvme2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "nvme3";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "nvme4";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "nvme5";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "nvme6";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "nvme7";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+};
+
+&i2c14 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "nvme8";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "nvme9";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "nvme10";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "nvme11";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "nvme12";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "nvme13";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "nvme14";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "nvme15";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+};
+
+&i2c15 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "nvme16";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "nvme17";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "nvme18";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "nvme19";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "nvme20";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "nvme21";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "nvme22";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "nvme23";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&vuart1 {
+ status = "okay";
+};
+
+&vuart2 {
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+};
+
+&mac2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii3_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+ <&syscon ASPEED_CLK_MAC3RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&mac3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii4_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+ <&syscon ASPEED_CLK_MAC4RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&wdt1 {
+ aspeed,reset-type = "none";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+ status = "okay";
+};
+
+&xdma {
+ status = "okay";
+ memory-region = <&vga_memory>;
+};
+
+&kcs2 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca2>;
+ aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
--
2.39.3
Add the P11 FSI device tree for use in upcoming BMC systems.
Unlike P10, there is no system with only two processors, so
only the quad processor FSI layout is necessary.
Signed-off-by: Eddie James <[email protected]>
---
Changes since v3:
- Re-order everything
- Update compatibles with the updated names from the documentation
.../arm/boot/dts/aspeed/ibm-power11-quad.dtsi | 1538 +++++++++++++++++
1 file changed, 1538 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi
diff --git a/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi b/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi
new file mode 100644
index 000000000000..a1896570b6e3
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi
@@ -0,0 +1,1538 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+
+/ {
+ aliases {
+ i2c100 = &cfam0_i2c0;
+ i2c101 = &cfam0_i2c1;
+ i2c110 = &cfam0_i2c10;
+ i2c111 = &cfam0_i2c11;
+ i2c112 = &cfam0_i2c12;
+ i2c113 = &cfam0_i2c13;
+ i2c114 = &cfam0_i2c14;
+ i2c115 = &cfam0_i2c15;
+ i2c202 = &cfam1_i2c2;
+ i2c203 = &cfam1_i2c3;
+ i2c210 = &cfam1_i2c10;
+ i2c211 = &cfam1_i2c11;
+ i2c214 = &cfam1_i2c14;
+ i2c215 = &cfam1_i2c15;
+ i2c216 = &cfam1_i2c16;
+ i2c217 = &cfam1_i2c17;
+ i2c300 = &cfam2_i2c0;
+ i2c301 = &cfam2_i2c1;
+ i2c310 = &cfam2_i2c10;
+ i2c311 = &cfam2_i2c11;
+ i2c312 = &cfam2_i2c12;
+ i2c313 = &cfam2_i2c13;
+ i2c314 = &cfam2_i2c14;
+ i2c315 = &cfam2_i2c15;
+ i2c402 = &cfam3_i2c2;
+ i2c403 = &cfam3_i2c3;
+ i2c410 = &cfam3_i2c10;
+ i2c411 = &cfam3_i2c11;
+ i2c414 = &cfam3_i2c14;
+ i2c415 = &cfam3_i2c15;
+ i2c416 = &cfam3_i2c16;
+ i2c417 = &cfam3_i2c17;
+
+ sbefifo100 = &sbefifo100;
+ sbefifo101 = &sbefifo101;
+ sbefifo110 = &sbefifo110;
+ sbefifo111 = &sbefifo111;
+ sbefifo112 = &sbefifo112;
+ sbefifo113 = &sbefifo113;
+ sbefifo114 = &sbefifo114;
+ sbefifo115 = &sbefifo115;
+ sbefifo202 = &sbefifo202;
+ sbefifo203 = &sbefifo203;
+ sbefifo210 = &sbefifo210;
+ sbefifo211 = &sbefifo211;
+ sbefifo214 = &sbefifo214;
+ sbefifo215 = &sbefifo215;
+ sbefifo216 = &sbefifo216;
+ sbefifo217 = &sbefifo217;
+ sbefifo300 = &sbefifo300;
+ sbefifo301 = &sbefifo301;
+ sbefifo310 = &sbefifo310;
+ sbefifo311 = &sbefifo311;
+ sbefifo312 = &sbefifo312;
+ sbefifo313 = &sbefifo313;
+ sbefifo314 = &sbefifo314;
+ sbefifo315 = &sbefifo315;
+ sbefifo402 = &sbefifo402;
+ sbefifo403 = &sbefifo403;
+ sbefifo410 = &sbefifo410;
+ sbefifo411 = &sbefifo411;
+ sbefifo414 = &sbefifo414;
+ sbefifo415 = &sbefifo415;
+ sbefifo416 = &sbefifo416;
+ sbefifo417 = &sbefifo417;
+
+ scom100 = &scom100;
+ scom101 = &scom101;
+ scom110 = &scom110;
+ scom111 = &scom111;
+ scom112 = &scom112;
+ scom113 = &scom113;
+ scom114 = &scom114;
+ scom115 = &scom115;
+ scom202 = &scom202;
+ scom203 = &scom203;
+ scom210 = &scom210;
+ scom211 = &scom211;
+ scom214 = &scom214;
+ scom215 = &scom215;
+ scom216 = &scom216;
+ scom217 = &scom217;
+ scom300 = &scom300;
+ scom301 = &scom301;
+ scom310 = &scom310;
+ scom311 = &scom311;
+ scom312 = &scom312;
+ scom313 = &scom313;
+ scom314 = &scom314;
+ scom315 = &scom315;
+ scom402 = &scom402;
+ scom403 = &scom403;
+ scom410 = &scom410;
+ scom411 = &scom411;
+ scom414 = &scom414;
+ scom415 = &scom415;
+ scom416 = &scom416;
+ scom417 = &scom417;
+
+ spi10 = &cfam0_spi0;
+ spi11 = &cfam0_spi1;
+ spi12 = &cfam0_spi2;
+ spi13 = &cfam0_spi3;
+ spi20 = &cfam1_spi0;
+ spi21 = &cfam1_spi1;
+ spi22 = &cfam1_spi2;
+ spi23 = &cfam1_spi3;
+ spi30 = &cfam2_spi0;
+ spi31 = &cfam2_spi1;
+ spi32 = &cfam2_spi2;
+ spi33 = &cfam2_spi3;
+ spi40 = &cfam3_spi0;
+ spi41 = &cfam3_spi1;
+ spi42 = &cfam3_spi2;
+ spi43 = &cfam3_spi3;
+ };
+};
+
+&fsim0 {
+ #address-cells = <2>;
+ #size-cells = <0>;
+ status = "okay";
+ cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom@1000 {
+ compatible = "ibm,p9-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam0_i2c0: i2c-bus@0 {
+ reg = <0>; /* OMI01 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom100: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo100: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam0_i2c1: i2c-bus@1 {
+ reg = <1>; /* OMI23 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom101: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo101: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam0_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom110: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo110: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam0_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom111: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo111: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam0_i2c12: i2c-bus@c {
+ reg = <12>; /* OP4A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom112: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo112: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam0_i2c13: i2c-bus@d {
+ reg = <13>; /* OP4B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom113: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo113: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam0_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom114: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo114: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam0_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom115: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo115: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam0_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam0_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam0_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam0_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+
+ occ {
+ compatible = "ibm,p10-occ";
+
+ hwmon {
+ compatible = "ibm,p10-occ-hwmon";
+ ibm,no-poll-on-init;
+ };
+ };
+ };
+
+ fsi_hub0: fsi@3400 {
+ compatible = "ibm,p9-fsi-controller";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&fsi_hub0 {
+ cfam@1,0 {
+ reg = <1 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <1>;
+
+ scom@1000 {
+ compatible = "ibm,p9-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam1_i2c2: i2c-bus@2 {
+ reg = <2>; /* OMI45 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom202: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo202: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam1_i2c3: i2c-bus@3 {
+ reg = <3>; /* OMI67 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom203: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo203: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam1_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom210: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo210: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam1_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom211: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo211: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam1_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom214: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo214: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam1_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom215: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo215: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam1_i2c16: i2c-bus@10 {
+ reg = <16>; /* OP6A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom216: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo216: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam1_i2c17: i2c-bus@11 {
+ reg = <17>; /* OP6B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom217: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo217: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam1_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam1_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam1_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam1_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+
+ occ {
+ compatible = "ibm,p10-occ";
+
+ hwmon {
+ compatible = "ibm,p10-occ-hwmon";
+ ibm,no-poll-on-init;
+ };
+ };
+ };
+
+ fsi@3400 {
+ compatible = "ibm,p9-fsi-controller";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-scan-on-init;
+ };
+ };
+
+ cfam@2,0 {
+ reg = <2 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <2>;
+
+ scom@1000 {
+ compatible = "ibm,p9-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam2_i2c0: i2c-bus@0 {
+ reg = <0>; /* OM01 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom300: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo300: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam2_i2c1: i2c-bus@1 {
+ reg = <1>; /* OM23 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom301: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo301: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam2_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom310: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo310: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam2_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom311: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo311: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam2_i2c12: i2c-bus@c {
+ reg = <12>; /* OP4A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom312: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo312: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam2_i2c13: i2c-bus@d {
+ reg = <13>; /* OP4B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom313: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo313: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam2_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom314: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo314: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam2_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom315: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo315: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam2_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam2_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam2_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam2_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+
+ occ {
+ compatible = "ibm,p10-occ";
+
+ hwmon {
+ compatible = "ibm,p10-occ-hwmon";
+ ibm,no-poll-on-init;
+ };
+ };
+ };
+
+ fsi@3400 {
+ compatible = "ibm,p9-fsi-controller";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-scan-on-init;
+ };
+ };
+
+ cfam@3,0 {
+ reg = <3 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <3>;
+
+ scom@1000 {
+ compatible = "ibm,p9-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam3_i2c2: i2c-bus@2 {
+ reg = <2>; /* OM45 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom402: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo402: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam3_i2c3: i2c-bus@3 {
+ reg = <3>; /* OM67 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom403: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo403: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam3_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom410: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo410: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam3_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom411: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo411: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam3_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom414: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo414: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam3_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom415: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo415: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam3_i2c16: i2c-bus@10 {
+ reg = <16>; /* OP6A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom416: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo416: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam3_i2c17: i2c-bus@11 {
+ reg = <17>; /* OP6B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom417: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo417: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam3_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam3_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam3_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam3_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+
+ occ {
+ compatible = "ibm,p10-occ";
+
+ hwmon {
+ compatible = "ibm,p10-occ-hwmon";
+ ibm,no-poll-on-init;
+ };
+ };
+ };
+
+ fsi@3400 {
+ compatible = "ibm,p9-fsi-controller";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-scan-on-init;
+ };
+ };
+};
--
2.39.3
The SBEFIFO engine provides an interface to the POWER processor
Self Boot Engine (SBE).
Signed-off-by: Eddie James <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: Andrew Jeffery <[email protected]>
---
Changes since v3:
- Drop occ unit address
.../bindings/fsi/ibm,p9-sbefifo.yaml | 51 +++++++++++++++++++
1 file changed, 51 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.yaml
diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.yaml b/Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.yaml
new file mode 100644
index 000000000000..24903829fca1
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,p9-sbefifo.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached SBEFIFO engine
+
+maintainers:
+ - Eddie James <[email protected]>
+
+description:
+ The SBEFIFO is an FSI CFAM engine that provides an interface to the
+ POWER processor Self Boot Engine (SBE). This node will always be a child
+ of an FSI CFAM node.
+
+properties:
+ compatible:
+ enum:
+ - ibm,p9-sbefifo
+ - ibm,odyssey-sbefifo
+
+ reg:
+ items:
+ - description: FSI slave address
+
+patternProperties:
+ "^occ":
+ type: object
+ $ref: ibm,p9-occ.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ fsi-slave-engine@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+
+ occ {
+ compatible = "ibm,p9-occ";
+
+ hwmon {
+ compatible = "ibm,p9-occ-hwmon";
+ };
+ };
+ };
--
2.39.3
Convert to json-schema for the AST2600 FSI master documentation.
Signed-off-by: Eddie James <[email protected]>
---
Changes since v3:
- Remove quotes around compatible strings
- Re-order allOf to below required
- Add child node in the example
- Change commit message to match similar commits
.../fsi/aspeed,ast2600-fsi-master.yaml | 81 +++++++++++++++++++
.../bindings/fsi/fsi-master-aspeed.txt | 36 ---------
2 files changed, 81 insertions(+), 36 deletions(-)
create mode 100644 Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
delete mode 100644 Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
diff --git a/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml b/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
new file mode 100644
index 000000000000..fcf7c4b93b78
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed FSI master
+
+maintainers:
+ - Eddie James <[email protected]>
+
+description:
+ The AST2600 and later contain two identical FSI masters. They share a
+ clock and have a separate interrupt line and output pins.
+
+properties:
+ compatible:
+ enum:
+ - aspeed,ast2600-fsi-master
+ - aspeed,ast2700-fsi-master
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ cfam-reset-gpios:
+ maxItems: 1
+ description:
+ Output GPIO pin for CFAM reset
+
+ fsi-routing-gpios:
+ maxItems: 1
+ description:
+ Output GPIO pin for setting the FSI mux (internal or cabled)
+
+ fsi-mux-gpios:
+ maxItems: 1
+ description:
+ Input GPIO pin for detecting the desired FSI mux state
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+allOf:
+ - $ref: fsi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/ast2600-clock.h>
+ #include <dt-bindings/gpio/aspeed-gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ fsi-master@1e79b000 {
+ compatible = "aspeed,ast2600-fsi-master";
+ reg = <0x1e79b000 0x94>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fsi1_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+ fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+ fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
+ cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt b/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
deleted file mode 100644
index 9853fefff5d8..000000000000
--- a/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Device-tree bindings for AST2600 FSI master
--------------------------------------------
-
-The AST2600 contains two identical FSI masters. They share a clock and have a
-separate interrupt line and output pins.
-
-Required properties:
- - compatible: "aspeed,ast2600-fsi-master"
- - reg: base address and length
- - clocks: phandle and clock number
- - interrupts: platform dependent interrupt description
- - pinctrl-0: phandle to pinctrl node
- - pinctrl-names: pinctrl state
-
-Optional properties:
- - cfam-reset-gpios: GPIO for CFAM reset
-
- - fsi-routing-gpios: GPIO for setting the FSI mux (internal or cabled)
- - fsi-mux-gpios: GPIO for detecting the desired FSI mux state
-
-
-Examples:
-
- fsi-master {
- compatible = "aspeed,ast2600-fsi-master", "fsi-master";
- reg = <0x1e79b000 0x94>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fsi1_default>;
- clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
-
- fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
- fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
-
- cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
- };
--
2.39.3
Convert to json-schema for the FSI-attached I2C controller.
Signed-off-by: Eddie James <[email protected]>
---
Changes since v3:
- Update MAINTAINERS
- Change commit message to match similar commits
.../devicetree/bindings/i2c/i2c-fsi.txt | 40 -------------
.../devicetree/bindings/i2c/ibm,i2c-fsi.yaml | 58 +++++++++++++++++++
MAINTAINERS | 2 +-
3 files changed, 59 insertions(+), 41 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-fsi.txt
create mode 100644 Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml
diff --git a/Documentation/devicetree/bindings/i2c/i2c-fsi.txt b/Documentation/devicetree/bindings/i2c/i2c-fsi.txt
deleted file mode 100644
index b1be2ceb7e69..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-fsi.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Device-tree bindings for FSI-attached I2C master and busses
------------------------------------------------------------
-
-Required properties:
- - compatible = "ibm,i2c-fsi";
- - reg = < address size >; : The FSI CFAM address and address
- space size.
- - #address-cells = <1>; : Number of address cells in child
- nodes.
- - #size-cells = <0>; : Number of size cells in child nodes.
- - child nodes : Nodes to describe busses off the I2C
- master.
-
-Child node required properties:
- - reg = < port number > : The port number on the I2C master.
-
-Child node optional properties:
- - child nodes : Nodes to describe devices on the I2C
- bus.
-
-Examples:
-
- i2c@1800 {
- compatible = "ibm,i2c-fsi";
- reg = < 0x1800 0x400 >;
- #address-cells = <1>;
- #size-cells = <0>;
-
- i2c-bus@0 {
- reg = <0>;
- };
-
- i2c-bus@1 {
- reg = <1>;
-
- eeprom@50 {
- compatible = "vendor,dev-name";
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml b/Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml
new file mode 100644
index 000000000000..8ff5585a3aa5
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/ibm,i2c-fsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached I2C controller
+
+maintainers:
+ - Eddie James <[email protected]>
+
+description:
+ This I2C controller is an FSI CFAM engine, providing access to a number of
+ I2C busses. Therefore this node will always be a child of an FSI CFAM node.
+
+properties:
+ compatible:
+ enum:
+ - ibm,i2c-fsi
+
+ reg:
+ items:
+ - description: FSI slave address
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c-bus@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c-bus@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index eea74166a2d9..9021e6ec4e6d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8924,7 +8924,7 @@ M: Eddie James <[email protected]>
L: [email protected]
L: [email protected] (moderated for non-subscribers)
S: Maintained
-F: Documentation/devicetree/bindings/i2c/i2c-fsi.txt
+F: Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml
F: drivers/i2c/busses/i2c-fsi.c
FSI-ATTACHED SPI DRIVER
--
2.39.3
There's no reason to restrict the creation of the hwmon device to
a matching child node name. Just get the first available one. There
should only be one child node anyway.
Signed-off-by: Eddie James <[email protected]>
---
drivers/fsi/fsi-occ.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/fsi/fsi-occ.c b/drivers/fsi/fsi-occ.c
index 2023355b3980..9a3658d86379 100644
--- a/drivers/fsi/fsi-occ.c
+++ b/drivers/fsi/fsi-occ.c
@@ -669,7 +669,7 @@ static int occ_probe(struct platform_device *pdev)
return rc;
}
- hwmon_node = of_get_child_by_name(dev->of_node, hwmon_dev_info.name);
+ hwmon_node = of_get_next_available_child(dev->of_node, NULL);
if (hwmon_node) {
snprintf(child_name, sizeof(child_name), "%s.%d", hwmon_dev_info.name, occ->idx);
hwmon_dev = of_platform_device_create(hwmon_node, child_name, dev);
--
2.39.3
Document two new AST2600 BMC boards for IBM P11 systems.
Signed-off-by: Eddie James <[email protected]>
---
Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
index 9a47c4ed4d17..2df91dd1b6a7 100644
--- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
@@ -86,7 +86,9 @@ properties:
- facebook,harma-bmc
- facebook,minerva-cmc
- facebook,yosemite4-bmc
+ - ibm,blueridge-bmc
- ibm,everest-bmc
+ - ibm,fuji-bmc
- ibm,rainier-bmc
- ibm,system1-bmc
- ibm,tacoma-bmc
--
2.39.3
Add the device tree for the new BMC system. The Fuji is a P11
system with eight processors.
Signed-off-by: Eddie James <[email protected]>
---
Changes since v3:
- Fix node names to be generic
- Re-order properties to be consistent
- Update compatibles with the updated names from the documentation
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts | 3877 +++++++++++++++++
2 files changed, 3878 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index 5eab2bdff394..783409b7c206 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -36,6 +36,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-ibm-blueridge.dtb \
aspeed-bmc-ibm-bonnell.dtb \
aspeed-bmc-ibm-everest.dtb \
+ aspeed-bmc-ibm-fuji.dtb \
aspeed-bmc-ibm-rainier.dtb \
aspeed-bmc-ibm-rainier-1s4u.dtb \
aspeed-bmc-ibm-rainier-4u.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts
new file mode 100644
index 000000000000..09d5deb86b12
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts
@@ -0,0 +1,3877 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include "aspeed-g6.dtsi"
+#include "ibm-power11-quad.dtsi"
+
+/ {
+ model = "Fuji";
+ compatible = "ibm,fuji-bmc", "aspeed,ast2600";
+
+ aliases {
+ i2c500 = &cfam4_i2c0;
+ i2c501 = &cfam4_i2c1;
+ i2c510 = &cfam4_i2c10;
+ i2c511 = &cfam4_i2c11;
+ i2c512 = &cfam4_i2c12;
+ i2c513 = &cfam4_i2c13;
+ i2c514 = &cfam4_i2c14;
+ i2c515 = &cfam4_i2c15;
+ i2c602 = &cfam5_i2c2;
+ i2c603 = &cfam5_i2c3;
+ i2c610 = &cfam5_i2c10;
+ i2c611 = &cfam5_i2c11;
+ i2c614 = &cfam5_i2c14;
+ i2c615 = &cfam5_i2c15;
+ i2c616 = &cfam5_i2c16;
+ i2c617 = &cfam5_i2c17;
+ i2c700 = &cfam6_i2c0;
+ i2c701 = &cfam6_i2c1;
+ i2c710 = &cfam6_i2c10;
+ i2c711 = &cfam6_i2c11;
+ i2c712 = &cfam6_i2c12;
+ i2c713 = &cfam6_i2c13;
+ i2c714 = &cfam6_i2c14;
+ i2c715 = &cfam6_i2c15;
+ i2c802 = &cfam7_i2c2;
+ i2c803 = &cfam7_i2c3;
+ i2c810 = &cfam7_i2c10;
+ i2c811 = &cfam7_i2c11;
+ i2c814 = &cfam7_i2c14;
+ i2c815 = &cfam7_i2c15;
+ i2c816 = &cfam7_i2c16;
+ i2c817 = &cfam7_i2c17;
+
+ i2c16 = &i2c4mux0chn0;
+ i2c17 = &i2c4mux0chn1;
+ i2c18 = &i2c4mux0chn2;
+ i2c19 = &i2c5mux0chn0;
+ i2c20 = &i2c5mux0chn1;
+ i2c21 = &i2c5mux0chn2;
+ i2c22 = &i2c5mux0chn3;
+ i2c23 = &i2c6mux0chn0;
+ i2c24 = &i2c6mux0chn1;
+ i2c25 = &i2c6mux0chn2;
+ i2c26 = &i2c6mux0chn3;
+ i2c27 = &i2c14mux0chn0;
+ i2c28 = &i2c14mux0chn1;
+ i2c29 = &i2c14mux0chn2;
+ i2c30 = &i2c14mux0chn3;
+ i2c31 = &i2c14mux1chn0;
+ i2c32 = &i2c14mux1chn1;
+ i2c33 = &i2c14mux1chn2;
+ i2c34 = &i2c14mux1chn3;
+ i2c35 = &i2c15mux0chn0;
+ i2c36 = &i2c15mux0chn1;
+ i2c37 = &i2c15mux0chn2;
+ i2c38 = &i2c15mux0chn3;
+ i2c39 = &i2c15mux1chn0;
+ i2c40 = &i2c15mux1chn1;
+ i2c41 = &i2c15mux1chn2;
+ i2c42 = &i2c15mux1chn3;
+ i2c43 = &i2c15mux2chn0;
+ i2c44 = &i2c15mux2chn1;
+ i2c45 = &i2c15mux2chn2;
+ i2c46 = &i2c15mux2chn3;
+ i2c47 = &i2c8mux0chn0;
+ i2c48 = &i2c8mux0chn1;
+
+ serial4 = &uart5;
+
+ sbefifo500 = &sbefifo500;
+ sbefifo501 = &sbefifo501;
+ sbefifo510 = &sbefifo510;
+ sbefifo511 = &sbefifo511;
+ sbefifo512 = &sbefifo512;
+ sbefifo513 = &sbefifo513;
+ sbefifo514 = &sbefifo514;
+ sbefifo515 = &sbefifo515;
+ sbefifo602 = &sbefifo602;
+ sbefifo603 = &sbefifo603;
+ sbefifo610 = &sbefifo610;
+ sbefifo611 = &sbefifo611;
+ sbefifo614 = &sbefifo614;
+ sbefifo615 = &sbefifo615;
+ sbefifo616 = &sbefifo616;
+ sbefifo617 = &sbefifo617;
+ sbefifo700 = &sbefifo700;
+ sbefifo701 = &sbefifo701;
+ sbefifo710 = &sbefifo710;
+ sbefifo711 = &sbefifo711;
+ sbefifo712 = &sbefifo712;
+ sbefifo713 = &sbefifo713;
+ sbefifo714 = &sbefifo714;
+ sbefifo715 = &sbefifo715;
+ sbefifo802 = &sbefifo802;
+ sbefifo803 = &sbefifo803;
+ sbefifo810 = &sbefifo810;
+ sbefifo811 = &sbefifo811;
+ sbefifo814 = &sbefifo814;
+ sbefifo815 = &sbefifo815;
+ sbefifo816 = &sbefifo816;
+ sbefifo817 = &sbefifo817;
+
+ scom500 = &scom500;
+ scom501 = &scom501;
+ scom510 = &scom510;
+ scom511 = &scom511;
+ scom512 = &scom512;
+ scom513 = &scom513;
+ scom514 = &scom514;
+ scom515 = &scom515;
+ scom602 = &scom602;
+ scom603 = &scom603;
+ scom610 = &scom610;
+ scom611 = &scom611;
+ scom614 = &scom614;
+ scom615 = &scom615;
+ scom616 = &scom616;
+ scom617 = &scom617;
+ scom700 = &scom700;
+ scom701 = &scom701;
+ scom710 = &scom710;
+ scom711 = &scom711;
+ scom712 = &scom712;
+ scom713 = &scom713;
+ scom714 = &scom714;
+ scom715 = &scom715;
+ scom802 = &scom802;
+ scom803 = &scom803;
+ scom810 = &scom810;
+ scom811 = &scom811;
+ scom814 = &scom814;
+ scom815 = &scom815;
+ scom816 = &scom816;
+ scom817 = &scom817;
+
+ spi50 = &cfam4_spi0;
+ spi51 = &cfam4_spi1;
+ spi52 = &cfam4_spi2;
+ spi53 = &cfam4_spi3;
+ spi60 = &cfam5_spi0;
+ spi61 = &cfam5_spi1;
+ spi62 = &cfam5_spi2;
+ spi63 = &cfam5_spi3;
+ spi70 = &cfam6_spi0;
+ spi71 = &cfam6_spi1;
+ spi72 = &cfam6_spi2;
+ spi73 = &cfam6_spi3;
+ spi80 = &cfam7_spi0;
+ spi81 = &cfam7_spi1;
+ spi82 = &cfam7_spi2;
+ spi83 = &cfam7_spi3;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ event_log: region@b3d00000 {
+ reg = <0xb3d00000 0x100000>;
+ no-map;
+ };
+
+ ramoops@b3e00000 {
+ compatible = "ramoops";
+ reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+ record-size = <0x8000>;
+ console-size = <0x8000>;
+ ftrace-size = <0x8000>;
+ pmsg-size = <0x8000>;
+ max-reason = <3>; /* KMSG_DUMP_EMERG */
+ };
+
+ /* LPC FW cycle bridge region requires natural alignment */
+ flash_memory: region@b4000000 {
+ reg = <0xb4000000 0x04000000>; /* 64M */
+ no-map;
+ };
+
+ /* VGA region is dictated by hardware strapping */
+ vga_memory: region@bf000000 {
+ compatible = "shared-dma-pool";
+ reg = <0xbf000000 0x01000000>; /* 16M */
+ no-map;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ poll-interval = <1000>;
+
+ event-fan0-presence {
+ gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
+ label = "fan0-presence";
+ linux,code = <15>;
+ };
+
+ event-fan1-presence {
+ gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
+ label = "fan1-presence";
+ linux,code = <14>;
+ };
+
+ event-fan2-presence {
+ gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+ label = "fan2-presence";
+ linux,code = <13>;
+ };
+
+ event-fan3-presence {
+ gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
+ label = "fan3-presence";
+ linux,code = <12>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ /* RTC battery fault LED at the back */
+ led-rtc-battery {
+ gpios = <&gpio0 ASPEED_GPIO(H, 0) GPIO_ACTIVE_LOW>;
+ };
+
+ /* BMC Card fault LED at the back */
+ led-bmc {
+ gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+ };
+
+ /* Enclosure Identify LED at the back */
+ led-rear-enc-id0 {
+ gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ /* Enclosure fault LED at the back */
+ led-rear-enc-fault0 {
+ gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+ };
+
+ /* PCIE slot power LED */
+ led-pcieslot-power {
+ gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc1 7>;
+ };
+};
+
+&adc1 {
+ status = "okay";
+ aspeed,int-vref-microvolt = <2500000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+ &pinctrl_adc10_default &pinctrl_adc11_default
+ &pinctrl_adc12_default &pinctrl_adc13_default
+ &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&gpio0 {
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "bmc-management-ready","","","","","","checkstop","",
+ /*C0-C7*/ "","","","","","","","",
+ /*D0-D7*/ "","","","","","","","",
+ /*E0-E7*/ "","","","","","","","",
+ /*F0-F7*/ "","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
+ /*G0-G7*/ "","","","","","","","",
+ /*H0-H7*/ "led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","","","",
+ /*I0-I7*/ "","","","","","","bmc-secure-boot","",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "","","","","","","","",
+ /*O0-O7*/ "","","","usb-power","","","","",
+ /*P0-P7*/ "","","","","led-pcieslot-power","","","",
+ /*Q0-Q7*/ "","","regulator-standby-faulted","","","","","",
+ /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","I2C_FLASH_MICRO_N","","",
+ /*S0-S7*/ "","","","","power-ffs-sync-history","","","",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","BMC_3RESTART_ATTEMPT_P","","","","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","","","","","","","",
+ /*Z0-Z7*/ "","","","","","","","";
+
+ usb-power-hog {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+ output-high;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ led-controller@62 {
+ compatible = "nxp,pca9552";
+ reg = <0x62>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "presence-ps0",
+ "presence-ps1",
+ "presence-ps2",
+ "presence-ps3",
+ "presence-pdb",
+ "presence-tpm",
+ "", "",
+ "presence-cp0",
+ "presence-cp1",
+ "presence-cp2",
+ "presence-cp3",
+ "presence-dasd",
+ "presence-lcd-op",
+ "presence-base-op",
+ "";
+ };
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+
+ eeprom@54 {
+ compatible = "atmel,24c128";
+ reg = <0x54>;
+ };
+
+ power-supply@68 {
+ compatible = "ibm,cffps";
+ reg = <0x68>;
+ };
+
+ power-supply@69 {
+ compatible = "ibm,cffps";
+ reg = <0x69>;
+ };
+
+ power-supply@6b {
+ compatible = "ibm,cffps";
+ reg = <0x6b>;
+ };
+
+ power-supply@6d {
+ compatible = "ibm,cffps";
+ reg = <0x6d>;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+
+ led-controller@65 {
+ compatible = "nxp,pca9552";
+ reg = <0x65>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "presence-cable-card1",
+ "presence-cable-card2",
+ "presence-cable-card3",
+ "presence-cable-card4",
+ "presence-cable-card5",
+ "expander-cable-card1",
+ "expander-cable-card2",
+ "expander-cable-card3",
+ "expander-cable-card4",
+ "expander-cable-card5";
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c4mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+
+ led-controller@62 {
+ compatible = "nxp,pca9551";
+ reg = <0x62>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c01-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c01-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c4mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c02-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c02-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c4mux0chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ led-controller@61 {
+ compatible = "nxp,pca9551";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c03-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c03-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+ };
+};
+
+&i2c5 {
+ status = "okay";
+
+ led-controller@66 {
+ compatible = "nxp,pca9552";
+ reg = <0x66>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "presence-cable-card6",
+ "presence-cable-card7",
+ "presence-cable-card8",
+ "presence-cable-card9",
+ "presence-cable-card10",
+ "presence-cable-card11",
+ "expander-cable-card6",
+ "expander-cable-card7",
+ "expander-cable-card8",
+ "expander-cable-card9",
+ "expander-cable-card10",
+ "expander-cable-card11";
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c5mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c04-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c04-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c5mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ led-controller@61 {
+ compatible = "nxp,pca9551";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c05-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c05-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c5mux0chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+
+ led-controller@62 {
+ compatible = "nxp,pca9551";
+ reg = <0x62>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c06-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c06-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c5mux0chn3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+
+ led-controller@63 {
+ compatible = "nxp,pca9551";
+ reg = <0x63>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c07-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c07-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+ };
+};
+
+&i2c6 {
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c6mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c08-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c08-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c6mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+
+ led-controller@62 {
+ compatible = "nxp,pca9551";
+ reg = <0x62>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c09-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c09-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c6mux0chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+
+ led-controller@63 {
+ compatible = "nxp,pca9551";
+ reg = <0x63>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c10-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c10-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c6mux0chn3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ led-controller@61 {
+ compatible = "nxp,pca9551";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "cablecard-c11-cxp-top";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "cablecard-c11-cxp-bot";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+ };
+
+ led-controller@65 {
+ compatible = "nxp,pca9552";
+ reg = <0x65>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "pcieslot-c01";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "pcieslot-c02";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "pcieslot-c03";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "pcieslot-c04";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "pcieslot-c05";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "pcieslot-c06";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "pcieslot-c07";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "pcieslot-c08";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "pcieslot-c09";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "pcieslot-c10";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "pcieslot-c11";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+};
+
+&i2c7 {
+ status = "okay";
+
+ led-controller@31 {
+ compatible = "ibm,pca9552";
+ reg = <0x31>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "ddimm0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "ddimm1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "ddimm2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "ddimm3";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "ddimm4";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "ddimm5";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "ddimm6";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "ddimm7";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "ddimm8";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "ddimm9";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "ddimm10";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "ddimm11";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "ddimm12";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "ddimm13";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ reg = <14>;
+ default-state = "keep";
+ label = "ddimm14";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ reg = <15>;
+ default-state = "keep";
+ label = "ddimm15";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ led-controller@32 {
+ compatible = "ibm,pca9552";
+ reg = <0x32>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "ddimm16";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "ddimm17";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "ddimm18";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "ddimm19";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "ddimm20";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "ddimm21";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "ddimm22";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "ddimm23";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "ddimm24";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "ddimm25";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "ddimm26";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "ddimm27";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "ddimm28";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "ddimm29";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ reg = <14>;
+ default-state = "keep";
+ label = "ddimm30";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ reg = <15>;
+ default-state = "keep";
+ label = "ddimm31";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ led-controller@33 {
+ compatible = "ibm,pca9552";
+ reg = <0x33>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "ddimm32";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "ddimm33";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "ddimm34";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "ddimm35";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "ddimm36";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "ddimm37";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "ddimm38";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "ddimm39";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "ddimm40";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "ddimm41";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "ddimm42";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "ddimm43";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "ddimm44";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "ddimm45";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ reg = <14>;
+ default-state = "keep";
+ label = "ddimm46";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ reg = <15>;
+ default-state = "keep";
+ label = "ddimm47";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ led-controller@30 {
+ compatible = "ibm,pca9552";
+ reg = <0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "ddimm48";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "ddimm49";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "ddimm50";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "ddimm51";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "ddimm52";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "ddimm53";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "ddimm54";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "ddimm55";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "ddimm56";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "ddimm57";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "ddimm58";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "ddimm59";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "ddimm60";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "ddimm61";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ reg = <14>;
+ default-state = "keep";
+ label = "ddimm62";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ reg = <15>;
+ default-state = "keep";
+ label = "ddimm63";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ led-controller@34 {
+ compatible = "ibm,pca9552";
+ reg = <0x34>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "planar";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "tpm";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "cpu3-c61";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "cpu0-c14";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "opencapi-connector3";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "opencapi-connector4";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "opencapi-connector5";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "vrm4";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "vrm5";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "vrm6";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "vrm7";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "vrm12";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "vrm13";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ reg = <14>;
+ default-state = "keep";
+ label = "vrm14";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ reg = <15>;
+ default-state = "keep";
+ label = "vrm15";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ led-controller@35 {
+ compatible = "ibm,pca9552";
+ reg = <0x35>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "dasd-backplane";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "power-distribution";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "cpu1-c19";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "cpu2-c56";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "opencapi-connector0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "opencapi-connector1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "opencapi-connector2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "vrm0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "vrm1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "vrm2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "vrm3";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "vrm8";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "vrm9";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ reg = <14>;
+ default-state = "keep";
+ label = "vrm10";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ reg = <15>;
+ default-state = "keep";
+ label = "vrm11";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+};
+
+&i2c8 {
+ status = "okay";
+
+ pmic@11 {
+ compatible = "ti,ucd90320";
+ reg = <0x11>;
+ };
+
+ rtc@32 {
+ compatible = "epson,rx8900";
+ reg = <0x32>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c8mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c8mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&i2c9 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+
+ eeprom@53 {
+ compatible = "atmel,24c128";
+ reg = <0x53>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c128";
+ reg = <0x52>;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ eeprom@53 {
+ compatible = "atmel,24c128";
+ reg = <0x53>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c128";
+ reg = <0x52>;
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ eeprom@53 {
+ compatible = "atmel,24c128";
+ reg = <0x53>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c128";
+ reg = <0x52>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+
+ tpm@2e {
+ compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+ reg = <0x2e>;
+ memory-region = <&event_log>;
+ };
+};
+
+&i2c13 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ eeprom@53 {
+ compatible = "atmel,24c128";
+ reg = <0x53>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c128";
+ reg = <0x52>;
+ };
+};
+
+&i2c14 {
+ multi-master;
+ status = "okay";
+
+ lcd-controller@62 {
+ compatible = "ibm,op-panel";
+ reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ idle-state = <1>;
+
+ i2c14mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c14mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@51 {
+ compatible = "atmel,24c32";
+ reg = <0x51>;
+ };
+ };
+
+ i2c14mux0chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "front-sys-id0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "front-check-log0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "front-enc-fault1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "front-sys-pwron0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+ };
+
+ i2c14mux0chn3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pwm@52 {
+ compatible = "maxim,max31785a";
+ reg = <0x52>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ led-controller@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ reg = <0>;
+ default-state = "keep";
+ label = "nvme0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-state = "keep";
+ label = "nvme1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ default-state = "keep";
+ label = "nvme2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ reg = <3>;
+ default-state = "keep";
+ label = "nvme3";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ default-state = "keep";
+ label = "nvme4";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ reg = <5>;
+ default-state = "keep";
+ label = "nvme5";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ reg = <6>;
+ default-state = "keep";
+ label = "nvme6";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ reg = <7>;
+ default-state = "keep";
+ label = "nvme7";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ reg = <8>;
+ default-state = "keep";
+ label = "nvme8";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ reg = <9>;
+ default-state = "keep";
+ label = "nvme9";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ reg = <10>;
+ default-state = "keep";
+ label = "fan0";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ reg = <11>;
+ default-state = "keep";
+ label = "fan1";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ reg = <12>;
+ default-state = "keep";
+ label = "fan2";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ default-state = "keep";
+ label = "fan3";
+ retain-state-shutdown;
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ pca0: led-controller@61 {
+ compatible = "nxp,pca9552";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x61>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "","","","",
+ "","","","",
+ "","","","",
+ "presence-fan3",
+ "presence-fan2",
+ "presence-fan1",
+ "presence-fan0";
+ };
+ };
+ };
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c14mux1chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+ };
+
+ i2c14mux1chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+ };
+
+ i2c14mux1chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+ };
+
+ i2c14mux1chn3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+ };
+ };
+};
+
+&i2c15 {
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c15mux0chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+
+ i2c15mux0chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+
+ i2c15mux0chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+
+ i2c15mux0chn3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+ };
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c15mux1chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+
+ i2c15mux1chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+
+ i2c15mux1chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+
+ i2c15mux1chn3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+ };
+
+ i2c-mux@72 {
+ compatible = "nxp,pca9546";
+ reg = <0x72>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c15mux2chn0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+
+ i2c15mux2chn1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+
+ i2c15mux2chn2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c15mux2chn3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&emmc_controller {
+ status = "okay";
+};
+
+&pinctrl_emmc_default {
+ bias-disable;
+};
+
+&emmc {
+ status = "okay";
+ clk-phase-mmc-hs200 = <210>, <228>;
+};
+
+&ibt {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&vuart1 {
+ status = "okay";
+};
+
+&vuart2 {
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+};
+
+&mac2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii3_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+ <&syscon ASPEED_CLK_MAC3RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&mac3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii4_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+ <&syscon ASPEED_CLK_MAC4RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&wdt1 {
+ aspeed,reset-type = "none";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+ status = "okay";
+};
+
+&xdma {
+ status = "okay";
+ memory-region = <&vga_memory>;
+};
+
+&kcs2 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca2>;
+ aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&fsi_hub0 {
+ cfam@4,0 { /* DCM2_C0 */
+ reg = <4 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <4>;
+
+ scom@1000 {
+ compatible = "ibm,p9-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam4_i2c0: i2c-bus@0 {
+ reg = <0>; /* OM01 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom500: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo500: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam4_i2c1: i2c-bus@1 {
+ reg = <1>; /* OM23 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom501: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo501: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam4_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom510: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo510: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam4_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom511: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo511: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam4_i2c12: i2c-bus@c {
+ reg = <12>; /* OP4A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom512: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo512: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam4_i2c13: i2c-bus@d {
+ reg = <13>; /* OP4B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom513: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo513: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam4_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom514: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo514: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam4_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom515: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo515: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam4_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam4_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam4_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam4_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+
+ occ {
+ compatible = "ibm,p10-occ";
+
+ hwmon {
+ compatible = "ibm,p10-occ-hwmon";
+ ibm,no-poll-on-init;
+ };
+ };
+ };
+
+ fsi@3400 {
+ compatible = "ibm,p9-fsi-controller";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-scan-on-init;
+ };
+ };
+
+ cfam@5,0 { /* DCM2_C1 */
+ reg = <5 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <5>;
+
+ scom@1000 {
+ compatible = "ibm,p9-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam5_i2c2: i2c-bus@2 {
+ reg = <2>; /* OM45 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom602: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo602: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam5_i2c3: i2c-bus@3 {
+ reg = <3>; /* OM67 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom603: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo603: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam5_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom610: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo610: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam5_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom611: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo611: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam5_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom614: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo614: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam5_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom615: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo615: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam5_i2c16: i2c-bus@10 {
+ reg = <16>; /* OP6A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom616: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo616: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam5_i2c17: i2c-bus@11 {
+ reg = <17>; /* OP6B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom617: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo617: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam5_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam5_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam5_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam5_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+
+ occ {
+ compatible = "ibm,p10-occ";
+
+ hwmon {
+ compatible = "ibm,p10-occ-hwmon";
+ ibm,no-poll-on-init;
+ };
+ };
+ };
+
+ fsi@3400 {
+ compatible = "ibm,p9-fsi-controller";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-scan-on-init;
+ };
+ };
+
+ cfam@6,0 { /* DCM3_C0 */
+ reg = <6 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <6>;
+
+ scom@1000 {
+ compatible = "ibm,p9-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam6_i2c0: i2c-bus@0 {
+ reg = <0>; /* OM01 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom700: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo700: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam6_i2c1: i2c-bus@1 {
+ reg = <1>; /* OM23 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom701: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo701: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam6_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom710: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo710: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam6_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom711: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo711: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam6_i2c12: i2c-bus@c {
+ reg = <12>; /* OP4A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom712: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo712: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam6_i2c13: i2c-bus@d {
+ reg = <13>; /* OP4B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom713: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo713: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam6_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom714: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo714: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam6_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom715: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo715: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam6_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam6_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam6_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam6_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+
+ occ {
+ compatible = "ibm,p10-occ";
+
+ hwmon {
+ compatible = "ibm,p10-occ-hwmon";
+ ibm,no-poll-on-init;
+ };
+ };
+ };
+
+ fsi@3400 {
+ compatible = "ibm,p9-fsi-controller";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-scan-on-init;
+ };
+ };
+
+ cfam@7,0 { /* DCM3_C1 */
+ reg = <7 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <7>;
+
+ scom@1000 {
+ compatible = "ibm,p9-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,i2c-fsi";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam7_i2c2: i2c-bus@2 {
+ reg = <2>; /* OM45 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom802: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo802: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam7_i2c3: i2c-bus@3 {
+ reg = <3>; /* OM67 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom803: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo803: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam7_i2c10: i2c-bus@a {
+ reg = <10>; /* OP3A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom810: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo810: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam7_i2c11: i2c-bus@b {
+ reg = <11>; /* OP3B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom811: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo811: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam7_i2c14: i2c-bus@e {
+ reg = <14>; /* OP5A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom814: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo814: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam7_i2c15: i2c-bus@f {
+ reg = <15>; /* OP5B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom815: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo815: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam7_i2c16: i2c-bus@10 {
+ reg = <16>; /* OP6A */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom816: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo816: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+
+ cfam7_i2c17: i2c-bus@11 {
+ reg = <17>; /* OP6B */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi@20 {
+ compatible = "ibm,i2cr-fsi-master";
+ reg = <0x20>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom817: scom@1000 {
+ compatible = "ibm,i2cr-scom";
+ reg = <0x1000 0x400>;
+ };
+
+ sbefifo817: sbefifo@2400 {
+ compatible = "ibm,odyssey-sbefifo";
+ reg = <0x2400 0x400>;
+ };
+ };
+ };
+ };
+ };
+
+ fsi2spi@1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam7_spi0: spi@0 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam7_spi1: spi@20 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam7_spi2: spi@40 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam7_spi3: spi@60 {
+ compatible = "ibm,spi-fsi";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ address-width = <24>;
+ pagesize = <256>;
+ size = <0x80000>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+
+ occ {
+ compatible = "ibm,p10-occ";
+
+ hwmon {
+ compatible = "ibm,p10-occ-hwmon";
+ ibm,no-poll-on-init;
+ };
+ };
+ };
+
+ fsi@3400 {
+ compatible = "ibm,p9-fsi-controller";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-scan-on-init;
+ };
+ };
+};
--
2.39.3
On 29/04/2024 23:01, Eddie James wrote:
> The FSI2SPI bridge has several SPI controllers behind it, which
> should be documented. Also, therefore the node needs to specify
> address and size cells.
>
> Signed-off-by: Eddie James <[email protected]>
> ---
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof
On 29/04/2024 23:01, Eddie James wrote:
> Conver to json-schema for the OCC documentation. Also document the fact
> that the OCC "bridge" device will often have the hwmon node as a
> child.
>
> Signed-off-by: Eddie James <[email protected]>
> ---
> Changes since v3:
> - Move required below other properties
> - Drop "occ-" in child node
> - Drop hwmon unit address
> - Complete example
> - Change commit message to match similar commits
>
> .../devicetree/bindings/fsi/ibm,p9-occ.txt | 16 --------
> .../devicetree/bindings/fsi/ibm,p9-occ.yaml | 41 +++++++++++++++++++
> 2 files changed, 41 insertions(+), 16 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
> create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml
>
> diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
> deleted file mode 100644
> index e73358075a90..000000000000
> --- a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
> +++ /dev/null
> @@ -1,16 +0,0 @@
> -Device-tree bindings for FSI-attached POWER9/POWER10 On-Chip Controller (OCC)
> ------------------------------------------------------------------------------
> -
> -This is the binding for the P9 or P10 On-Chip Controller accessed over FSI from
> -a service processor. See fsi.txt for details on bindings for FSI slave and CFAM
> -nodes. The OCC is not an FSI slave device itself, rather it is accessed
> -through the SBE FIFO.
> -
> -Required properties:
> - - compatible = "ibm,p9-occ" or "ibm,p10-occ"
> -
> -Examples:
> -
> - occ {
> - compatible = "ibm,p9-occ";
> - };
> diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml
> new file mode 100644
> index 000000000000..3ab2582cb8a0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml
> @@ -0,0 +1,41 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/fsi/ibm,p9-occ.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: IBM FSI-attached On-Chip Controller (OCC)
> +
> +maintainers:
> + - Eddie James <[email protected]>
> +
> +description:
> + The POWER processor On-Chip Controller (OCC) helps manage power and
> + thermals for the system, accessed through the FSI-attached SBEFIFO
> + from a service processor.
> +
> +properties:
> + compatible:
> + enum:
> + - ibm,p9-occ
> + - ibm,p10-occ
> +
> +patternProperties:
> + "^hwmon":
And now it raises questions:
1. Other devices on FSI bus have unit addresses, so why this does not?
2. This suggest only one hwmon, so ^hwmon$, which is then not a
patternProperty but property.
3. But the true problem why do you even need two empty nodes? These
should be combined into one node.
> + type: object
> + $ref: /schemas/hwmon/ibm,occ-hwmon.yaml
> +
> +required:
> + - compatible
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + occ {
> + compatible = "ibm,p9-occ";
> +
> + hwmon {
> + compatible = "ibm,p9-occ-hwmon";
> + };
> + };
Best regards,
Krzysztof
On 29/04/2024 23:01, Eddie James wrote:
> The SBEFIFO engine provides an interface to the POWER processor
> Self Boot Engine (SBE).
>
> Signed-off-by: Eddie James <[email protected]>
> Acked-by: Conor Dooley <[email protected]>
> Reviewed-by: Andrew Jeffery <[email protected]>
> ---
> Changes since v3:
> - Drop occ unit address
>
> .../bindings/fsi/ibm,p9-sbefifo.yaml | 51 +++++++++++++++++++
> 1 file changed, 51 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.yaml
>
> diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.yaml b/Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.yaml
> new file mode 100644
> index 000000000000..24903829fca1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.yaml
> @@ -0,0 +1,51 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/fsi/ibm,p9-sbefifo.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: IBM FSI-attached SBEFIFO engine
> +
> +maintainers:
> + - Eddie James <[email protected]>
> +
> +description:
> + The SBEFIFO is an FSI CFAM engine that provides an interface to the
> + POWER processor Self Boot Engine (SBE). This node will always be a child
> + of an FSI CFAM node.
> +
> +properties:
> + compatible:
> + enum:
> + - ibm,p9-sbefifo
> + - ibm,odyssey-sbefifo
> +
> + reg:
> + items:
> + - description: FSI slave address
> +
> +patternProperties:
> + "^occ":
Same questions as patch #4.
> + type: object
> + $ref: ibm,p9-occ.yaml#
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + fsi-slave-engine@2400 {
> + compatible = "ibm,p9-sbefifo";
> + reg = <0x2400 0x400>;
> +
> + occ {
> + compatible = "ibm,p9-occ";
> +
> + hwmon {
> + compatible = "ibm,p9-occ-hwmon";
Three nodes which should be just one node.
Best regards,
Krzysztof
On 29/04/2024 23:01, Eddie James wrote:
> Convert to json-schema for the AST2600 FSI master documentation.
Please mention all the changes from pure conversion.
>
> Signed-off-by: Eddie James <[email protected]>
> ---
> Changes since v3:
> - Remove quotes around compatible strings
> - Re-order allOf to below required
> - Add child node in the example
> - Change commit message to match similar commits
>
> .../fsi/aspeed,ast2600-fsi-master.yaml | 81 +++++++++++++++++++
> .../bindings/fsi/fsi-master-aspeed.txt | 36 ---------
> 2 files changed, 81 insertions(+), 36 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
> delete mode 100644 Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
>
> diff --git a/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml b/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
> new file mode 100644
> index 000000000000..fcf7c4b93b78
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
> @@ -0,0 +1,81 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Aspeed FSI master
> +
> +maintainers:
> + - Eddie James <[email protected]>
> +
> +description:
> + The AST2600 and later contain two identical FSI masters. They share a
> + clock and have a separate interrupt line and output pins.
> +
> +properties:
> + compatible:
> + enum:
> + - aspeed,ast2600-fsi-master
> + - aspeed,ast2700-fsi-master
There was no such compatible before.
How does this even validate? Where is fsi-master? You dropped a
compatible without any explanation.
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
Best regards,
Krzysztof
On 29/04/2024 23:01, Eddie James wrote:
> +
> +patternProperties:
> + "cfam@[0-9a-f],[0-9a-f]":
> + type: object
> + properties:
> + chip-id:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Processor index
fsi.txt tells a bit more about it, so extend the description.
> +
> + reg:
> + maxItems: 1
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 1
> +
> + required:
> + - reg
> +
> + additionalProperties: true
> +
> +additionalProperties: true
> +
> +examples:
> + - |
> + fsi {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + cfam@0,0 {
> + reg = <0 0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + chip-id = <0>;
> + };
> + };
Drop the example, it's not being validated/used.
Best regards,
Krzysztof
On 29/04/2024 23:01, Eddie James wrote:
> Remove the common properties from the I2CR documentation and instead
> point to the common FSI controller documentation.
>
> Signed-off-by: Eddie James <[email protected]>
> ---
> Changes since v3:
> - Re-order allOf to below required
>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof
On 29/04/2024 23:01, Eddie James wrote:
> Document the FSI Hub Controller CFAM engine.
>
> Signed-off-by: Eddie James <[email protected]>
> ---
> Changes since v3:
> - Change name from ibm,hub-fsi-controller to ibm,p9-fsi-controller
>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof
On 29/04/2024 23:01, Eddie James wrote:
> Convert to json-schema for the FSI-attached I2C controller.
>
> Signed-off-by: Eddie James <[email protected]>
> ---
> Changes since v3:
> - Update MAINTAINERS
> - Change commit message to match similar commits
>
> .../devicetree/bindings/i2c/i2c-fsi.txt | 40 -------------
> .../devicetree/bindings/i2c/ibm,i2c-fsi.yaml | 58 +++++++++++++++++++
Please split independent patches to separate patchsets, so they can be
reviewed and picked up by respective maintainers.
I don't see any dependency here. Neither in 1st patch.
> MAINTAINERS | 2 +-
> 3 files changed, 59 insertions(+), 41 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-fsi.txt
> create mode 100644 Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml
>
..
> diff --git a/Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml b/Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml
> new file mode 100644
> index 000000000000..8ff5585a3aa5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml
> @@ -0,0 +1,58 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i2c/ibm,i2c-fsi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: IBM FSI-attached I2C controller
> +
> +maintainers:
> + - Eddie James <[email protected]>
> +
> +description:
> + This I2C controller is an FSI CFAM engine, providing access to a number of
> + I2C busses. Therefore this node will always be a child of an FSI CFAM node.
> +
> +properties:
> + compatible:
> + enum:
> + - ibm,i2c-fsi
> +
> + reg:
> + items:
> + - description: FSI slave address
> +
> +required:
> + - compatible
> + - reg
> +
> +allOf:
> + - $ref: /schemas/i2c/i2c-controller.yaml#
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + i2c@1800 {
> + compatible = "ibm,i2c-fsi";
> + reg = <0x1800 0x400>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + i2c-bus@0 {
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
This does not look right. Why do you have multiple i2c-bus children? I
do not think i2c-controller.yaml schema allows this.
Best regards,
Krzysztof
On 29/04/2024 23:01, Eddie James wrote:
> Document two new AST2600 BMC boards for IBM P11 systems.
>
> Signed-off-by: Eddie James <[email protected]>
> ---
Acked-by: Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof
On 29/04/2024 23:01, Eddie James wrote:
> Use p9-scom instead of fsi2pib.
Why? Commits must *always* say why you are doing it. What is easy to see.
>
> Signed-off-by: Eddie James <[email protected]>
> ---
> drivers/fsi/fsi-scom.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/fsi/fsi-scom.c b/drivers/fsi/fsi-scom.c
> index 61dbda9dbe2b..18ca213fdc7e 100644
> --- a/drivers/fsi/fsi-scom.c
> +++ b/drivers/fsi/fsi-scom.c
> @@ -589,7 +589,7 @@ static int scom_remove(struct device *dev)
> }
>
> static const struct of_device_id scom_of_ids[] = {
> - { .compatible = "ibm,fsi2pib" },
> + { .compatible = "ibm,p9-scom" },
This breaks all users without any explanation in the commit!
Best regards,
Krzysztof
On 4/30/24 01:53, Krzysztof Kozlowski wrote:
> On 29/04/2024 23:01, Eddie James wrote:
>> Conver to json-schema for the OCC documentation. Also document the fact
>> that the OCC "bridge" device will often have the hwmon node as a
>> child.
>>
>> Signed-off-by: Eddie James <[email protected]>
>> ---
>> Changes since v3:
>> - Move required below other properties
>> - Drop "occ-" in child node
>> - Drop hwmon unit address
>> - Complete example
>> - Change commit message to match similar commits
>>
>> .../devicetree/bindings/fsi/ibm,p9-occ.txt | 16 --------
>> .../devicetree/bindings/fsi/ibm,p9-occ.yaml | 41 +++++++++++++++++++
>> 2 files changed, 41 insertions(+), 16 deletions(-)
>> delete mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
>> create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
>> deleted file mode 100644
>> index e73358075a90..000000000000
>> --- a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
>> +++ /dev/null
>> @@ -1,16 +0,0 @@
>> -Device-tree bindings for FSI-attached POWER9/POWER10 On-Chip Controller (OCC)
>> ------------------------------------------------------------------------------
>> -
>> -This is the binding for the P9 or P10 On-Chip Controller accessed over FSI from
>> -a service processor. See fsi.txt for details on bindings for FSI slave and CFAM
>> -nodes. The OCC is not an FSI slave device itself, rather it is accessed
>> -through the SBE FIFO.
>> -
>> -Required properties:
>> - - compatible = "ibm,p9-occ" or "ibm,p10-occ"
>> -
>> -Examples:
>> -
>> - occ {
>> - compatible = "ibm,p9-occ";
>> - };
>> diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml
>> new file mode 100644
>> index 000000000000..3ab2582cb8a0
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml
>> @@ -0,0 +1,41 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/fsi/ibm,p9-occ.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: IBM FSI-attached On-Chip Controller (OCC)
>> +
>> +maintainers:
>> + - Eddie James <[email protected]>
>> +
>> +description:
>> + The POWER processor On-Chip Controller (OCC) helps manage power and
>> + thermals for the system, accessed through the FSI-attached SBEFIFO
>> + from a service processor.
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - ibm,p9-occ
>> + - ibm,p10-occ
>> +
>> +patternProperties:
>> + "^hwmon":
> And now it raises questions:
> 1. Other devices on FSI bus have unit addresses, so why this does not?
> 2. This suggest only one hwmon, so ^hwmon$, which is then not a
> patternProperty but property.
> 3. But the true problem why do you even need two empty nodes? These
> should be combined into one node.
1. This is not truly on the FSI bus. It is on the SBEFIFO "bus"
2. True enough, I'll change it to property.
3. If this binding was being designed now, I'd agree with you, but the
two nodes (occ and occ-hwmon) are already documented, I'm just changing
to yaml here... Changing that would require a lot of changes and would
break the two drivers.
>
>> + type: object
>> + $ref: /schemas/hwmon/ibm,occ-hwmon.yaml
>> +
>> +required:
>> + - compatible
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + occ {
>> + compatible = "ibm,p9-occ";
>> +
>> + hwmon {
>> + compatible = "ibm,p9-occ-hwmon";
>> + };
>> + };
> Best regards,
> Krzysztof
>
On 4/30/24 01:54, Krzysztof Kozlowski wrote:
> On 29/04/2024 23:01, Eddie James wrote:
>> The SBEFIFO engine provides an interface to the POWER processor
>> Self Boot Engine (SBE).
>>
>> Signed-off-by: Eddie James <[email protected]>
>> Acked-by: Conor Dooley <[email protected]>
>> Reviewed-by: Andrew Jeffery <[email protected]>
>> ---
>> Changes since v3:
>> - Drop occ unit address
>>
>> .../bindings/fsi/ibm,p9-sbefifo.yaml | 51 +++++++++++++++++++
>> 1 file changed, 51 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.yaml b/Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.yaml
>> new file mode 100644
>> index 000000000000..24903829fca1
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.yaml
>> @@ -0,0 +1,51 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/fsi/ibm,p9-sbefifo.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: IBM FSI-attached SBEFIFO engine
>> +
>> +maintainers:
>> + - Eddie James <[email protected]>
>> +
>> +description:
>> + The SBEFIFO is an FSI CFAM engine that provides an interface to the
>> + POWER processor Self Boot Engine (SBE). This node will always be a child
>> + of an FSI CFAM node.
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - ibm,p9-sbefifo
>> + - ibm,odyssey-sbefifo
>> +
>> + reg:
>> + items:
>> + - description: FSI slave address
>> +
>> +patternProperties:
>> + "^occ":
> Same questions as patch #4.
>
>> + type: object
>> + $ref: ibm,p9-occ.yaml#
>> +
>> +required:
>> + - compatible
>> + - reg
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + fsi-slave-engine@2400 {
>> + compatible = "ibm,p9-sbefifo";
>> + reg = <0x2400 0x400>;
>> +
>> + occ {
>> + compatible = "ibm,p9-occ";
>> +
>> + hwmon {
>> + compatible = "ibm,p9-occ-hwmon";
> Three nodes which should be just one node.
The other two are already documented... The SBEFIFO should have
documented a long time ago, and designed accordingly. However keep in
mind, the OCC nodes are optional on SBEFIFOs, since the Odyssey chip
SBEFIFOs are not connected to OCCs.
Thanks for your detailed review.
Eddie
>
> Best regards,
> Krzysztof
>
On 4/30/24 02:04, Krzysztof Kozlowski wrote:
> On 29/04/2024 23:01, Eddie James wrote:
>> Convert to json-schema for the AST2600 FSI master documentation.
> Please mention all the changes from pure conversion.
Sure.
>
>> Signed-off-by: Eddie James <[email protected]>
>> ---
>> Changes since v3:
>> - Remove quotes around compatible strings
>> - Re-order allOf to below required
>> - Add child node in the example
>> - Change commit message to match similar commits
>>
>> .../fsi/aspeed,ast2600-fsi-master.yaml | 81 +++++++++++++++++++
>> .../bindings/fsi/fsi-master-aspeed.txt | 36 ---------
>> 2 files changed, 81 insertions(+), 36 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
>> delete mode 100644 Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
>>
>> diff --git a/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml b/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
>> new file mode 100644
>> index 000000000000..fcf7c4b93b78
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
>> @@ -0,0 +1,81 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Aspeed FSI master
>> +
>> +maintainers:
>> + - Eddie James <[email protected]>
>> +
>> +description:
>> + The AST2600 and later contain two identical FSI masters. They share a
>> + clock and have a separate interrupt line and output pins.
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - aspeed,ast2600-fsi-master
>> + - aspeed,ast2700-fsi-master
> There was no such compatible before.
>
> How does this even validate? Where is fsi-master? You dropped a
> compatible without any explanation.
I can make it a separate change to add ast2700.
I suppose I don't understand having two compatibles... Aspeed master
shouldn't use "fsi-master" as that is too generic, right? Why wouldn't
it validate? Devicetrees using "fsi-master" also use
"aspeed,ast2600-fsi-master" so they should be OK...
>
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + clocks:
>> + maxItems: 1
>> +
>
> Best regards,
> Krzysztof
>
On 4/30/24 02:01, Krzysztof Kozlowski wrote:
> On 29/04/2024 23:01, Eddie James wrote:
>> +
>> +patternProperties:
>> + "cfam@[0-9a-f],[0-9a-f]":
>> + type: object
>> + properties:
>> + chip-id:
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + description:
>> + Processor index
> fsi.txt tells a bit more about it, so extend the description.
Ack.
Thanks,
Eddie
>
>
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + "#address-cells":
>> + const: 1
>> +
>> + "#size-cells":
>> + const: 1
>> +
>> + required:
>> + - reg
>> +
>> + additionalProperties: true
>> +
>> +additionalProperties: true
>> +
>> +examples:
>> + - |
>> + fsi {
>> + #address-cells = <2>;
>> + #size-cells = <0>;
>> +
>> + cfam@0,0 {
>> + reg = <0 0>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + chip-id = <0>;
>> + };
>> + };
> Drop the example, it's not being validated/used.
Ack.
>
> Best regards,
> Krzysztof
>
On 4/30/24 02:35, Krzysztof Kozlowski wrote:
> On 29/04/2024 23:01, Eddie James wrote:
>> Convert to json-schema for the FSI-attached I2C controller.
>>
>> Signed-off-by: Eddie James <[email protected]>
>> ---
>> Changes since v3:
>> - Update MAINTAINERS
>> - Change commit message to match similar commits
>>
>> .../devicetree/bindings/i2c/i2c-fsi.txt | 40 -------------
>> .../devicetree/bindings/i2c/ibm,i2c-fsi.yaml | 58 +++++++++++++++++++
>
> Please split independent patches to separate patchsets, so they can be
> reviewed and picked up by respective maintainers.
>
> I don't see any dependency here. Neither in 1st patch.
OK, I guess that makes it complicated for Andrew to pull together with
the device tree changes in a way that avoids warnings, but I agree there
is no direct dependency.
>
>
>> MAINTAINERS | 2 +-
>> 3 files changed, 59 insertions(+), 41 deletions(-)
>> delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-fsi.txt
>> create mode 100644 Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml
>>
> ...
>
>> diff --git a/Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml b/Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml
>> new file mode 100644
>> index 000000000000..8ff5585a3aa5
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml
>> @@ -0,0 +1,58 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/i2c/ibm,i2c-fsi.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: IBM FSI-attached I2C controller
>> +
>> +maintainers:
>> + - Eddie James <[email protected]>
>> +
>> +description:
>> + This I2C controller is an FSI CFAM engine, providing access to a number of
>> + I2C busses. Therefore this node will always be a child of an FSI CFAM node.
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - ibm,i2c-fsi
>> +
>> + reg:
>> + items:
>> + - description: FSI slave address
>> +
>> +required:
>> + - compatible
>> + - reg
>> +
>> +allOf:
>> + - $ref: /schemas/i2c/i2c-controller.yaml#
>> +
>> +unevaluatedProperties: false
>> +
>> +examples:
>> + - |
>> + i2c@1800 {
>> + compatible = "ibm,i2c-fsi";
>> + reg = <0x1800 0x400>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + i2c-bus@0 {
>> + reg = <0>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
> This does not look right. Why do you have multiple i2c-bus children? I
> do not think i2c-controller.yaml schema allows this.
It does seem to allow it, as this validates here and in the device tree.
It is this way because the I2C controller provides multiple busses.
Should I change it so to add "bus" pattern properties that reference
i2c-controller.yaml?
Thanks,
Eddie
>
> Best regards,
> Krzysztof
>
On 01/05/2024 18:16, Eddie James wrote:
>
> On 4/30/24 02:35, Krzysztof Kozlowski wrote:
>> On 29/04/2024 23:01, Eddie James wrote:
>>> Convert to json-schema for the FSI-attached I2C controller.
>>>
>>> Signed-off-by: Eddie James <[email protected]>
>>> ---
>>> Changes since v3:
>>> - Update MAINTAINERS
>>> - Change commit message to match similar commits
>>>
>>> .../devicetree/bindings/i2c/i2c-fsi.txt | 40 -------------
>>> .../devicetree/bindings/i2c/ibm,i2c-fsi.yaml | 58 +++++++++++++++++++
>>
>> Please split independent patches to separate patchsets, so they can be
>> reviewed and picked up by respective maintainers.
>>
>> I don't see any dependency here. Neither in 1st patch.
>
>
> OK, I guess that makes it complicated for Andrew to pull together with
> the device tree changes in a way that avoids warnings, but I agree there
> is no direct dependency.
SoC tree should not pull subsystem patches. Plus DTS must be separate
from drivers...
>>> +
>>> +examples:
>>> + - |
>>> + i2c@1800 {
>>> + compatible = "ibm,i2c-fsi";
>>> + reg = <0x1800 0x400>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + i2c-bus@0 {
>>> + reg = <0>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>> This does not look right. Why do you have multiple i2c-bus children? I
>> do not think i2c-controller.yaml schema allows this.
>
>
> It does seem to allow it, as this validates here and in the device tree.
Only because children are treated as I2C devices.
> It is this way because the I2C controller provides multiple busses.
It does not look like I2C controller anymore. I think I2C controller
sits on the bus, not on multiple busses. How are SDA/SCL lines connected?
This looks like you are describing something which is not I2C bus
controller as I2C bus controller...
I'll let I2C maintainer comment on that - is this real I2C bus which
consists of multiple buses.
> Should I change it so to add "bus" pattern properties that reference
> i2c-controller.yaml?
Not sure if I get it right... whatever is the I2C bus controller, should
reference i2c-controller.yaml. Not some other entity.
Best regards,
Krzysztof
On 01/05/2024 17:59, Eddie James wrote:
>
> On 4/30/24 01:53, Krzysztof Kozlowski wrote:
>> On 29/04/2024 23:01, Eddie James wrote:
>>> Conver to json-schema for the OCC documentation. Also document the fact
>>> that the OCC "bridge" device will often have the hwmon node as a
>>> child.
>>>
>>> Signed-off-by: Eddie James <[email protected]>
>>> ---
>>> Changes since v3:
>>> - Move required below other properties
>>> - Drop "occ-" in child node
>>> - Drop hwmon unit address
>>> - Complete example
>>> - Change commit message to match similar commits
>>>
>>> .../devicetree/bindings/fsi/ibm,p9-occ.txt | 16 --------
>>> .../devicetree/bindings/fsi/ibm,p9-occ.yaml | 41 +++++++++++++++++++
>>> 2 files changed, 41 insertions(+), 16 deletions(-)
>>> delete mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
>>> create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml
>>>
>>> diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
>>> deleted file mode 100644
>>> index e73358075a90..000000000000
>>> --- a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
>>> +++ /dev/null
>>> @@ -1,16 +0,0 @@
>>> -Device-tree bindings for FSI-attached POWER9/POWER10 On-Chip Controller (OCC)
>>> ------------------------------------------------------------------------------
>>> -
>>> -This is the binding for the P9 or P10 On-Chip Controller accessed over FSI from
>>> -a service processor. See fsi.txt for details on bindings for FSI slave and CFAM
>>> -nodes. The OCC is not an FSI slave device itself, rather it is accessed
>>> -through the SBE FIFO.
>>> -
>>> -Required properties:
>>> - - compatible = "ibm,p9-occ" or "ibm,p10-occ"
>>> -
>>> -Examples:
>>> -
>>> - occ {
>>> - compatible = "ibm,p9-occ";
>>> - };
>>> diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml
>>> new file mode 100644
>>> index 000000000000..3ab2582cb8a0
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml
>>> @@ -0,0 +1,41 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/fsi/ibm,p9-occ.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: IBM FSI-attached On-Chip Controller (OCC)
>>> +
>>> +maintainers:
>>> + - Eddie James <[email protected]>
>>> +
>>> +description:
>>> + The POWER processor On-Chip Controller (OCC) helps manage power and
>>> + thermals for the system, accessed through the FSI-attached SBEFIFO
>>> + from a service processor.
>>> +
>>> +properties:
>>> + compatible:
>>> + enum:
>>> + - ibm,p9-occ
>>> + - ibm,p10-occ
>>> +
>>> +patternProperties:
>>> + "^hwmon":
>> And now it raises questions:
>> 1. Other devices on FSI bus have unit addresses, so why this does not?
>> 2. This suggest only one hwmon, so ^hwmon$, which is then not a
>> patternProperty but property.
>> 3. But the true problem why do you even need two empty nodes? These
>> should be combined into one node.
>
>
> 1. This is not truly on the FSI bus. It is on the SBEFIFO "bus"
>
> 2. True enough, I'll change it to property.
>
> 3. If this binding was being designed now, I'd agree with you, but the
> two nodes (occ and occ-hwmon) are already documented, I'm just changing
> to yaml here... Changing that would require a lot of changes and would
> break the two drivers.
No child was documented before and documenting things post-factum does
not allow to bypass regular review rules.
Best regards,
Krzysztof
On 01/05/2024 18:12, Eddie James wrote:
>
> On 4/30/24 02:04, Krzysztof Kozlowski wrote:
>> On 29/04/2024 23:01, Eddie James wrote:
>>> Convert to json-schema for the AST2600 FSI master documentation.
>> Please mention all the changes from pure conversion.
>
>
> Sure.
>
>
>>
>>> Signed-off-by: Eddie James <[email protected]>
>>> ---
>>> Changes since v3:
>>> - Remove quotes around compatible strings
>>> - Re-order allOf to below required
>>> - Add child node in the example
>>> - Change commit message to match similar commits
>>>
>>> .../fsi/aspeed,ast2600-fsi-master.yaml | 81 +++++++++++++++++++
>>> .../bindings/fsi/fsi-master-aspeed.txt | 36 ---------
>>> 2 files changed, 81 insertions(+), 36 deletions(-)
>>> create mode 100644 Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
>>> delete mode 100644 Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml b/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
>>> new file mode 100644
>>> index 000000000000..fcf7c4b93b78
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
>>> @@ -0,0 +1,81 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Aspeed FSI master
>>> +
>>> +maintainers:
>>> + - Eddie James <[email protected]>
>>> +
>>> +description:
>>> + The AST2600 and later contain two identical FSI masters. They share a
>>> + clock and have a separate interrupt line and output pins.
>>> +
>>> +properties:
>>> + compatible:
>>> + enum:
>>> + - aspeed,ast2600-fsi-master
>>> + - aspeed,ast2700-fsi-master
>> There was no such compatible before.
>>
>> How does this even validate? Where is fsi-master? You dropped a
>> compatible without any explanation.
>
>
> I can make it a separate change to add ast2700.
>
>
> I suppose I don't understand having two compatibles... Aspeed master
> shouldn't use "fsi-master" as that is too generic, right? Why wouldn't
Not necessarily, depends. Dropping it silently is confusing. What about
other users? firmware, bootloaders, out-of-tree, other OS? Did you
investigate all of them?
> it validate? Devicetrees using "fsi-master" also use
> "aspeed,ast2600-fsi-master" so they should be OK...
No, because the compatibles do not match. Run validation and you will
see the errors.
I am fine with dropping such compatible, which is not used by current
kernel ABI, but first DTS must be fixed and second some explanation and
justification is needed.
Best regards,
Krzysztof
On 5/4/24 06:55, Krzysztof Kozlowski wrote:
> On 01/05/2024 18:12, Eddie James wrote:
>> On 4/30/24 02:04, Krzysztof Kozlowski wrote:
>>> On 29/04/2024 23:01, Eddie James wrote:
>>>> Convert to json-schema for the AST2600 FSI master documentation.
>>> Please mention all the changes from pure conversion.
>>
>> Sure.
>>
>>
>>>> Signed-off-by: Eddie James <[email protected]>
>>>> ---
>>>> Changes since v3:
>>>> - Remove quotes around compatible strings
>>>> - Re-order allOf to below required
>>>> - Add child node in the example
>>>> - Change commit message to match similar commits
>>>>
>>>> .../fsi/aspeed,ast2600-fsi-master.yaml | 81 +++++++++++++++++++
>>>> .../bindings/fsi/fsi-master-aspeed.txt | 36 ---------
>>>> 2 files changed, 81 insertions(+), 36 deletions(-)
>>>> create mode 100644 Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
>>>> delete mode 100644 Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml b/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
>>>> new file mode 100644
>>>> index 000000000000..fcf7c4b93b78
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
>>>> @@ -0,0 +1,81 @@
>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>>> +%YAML 1.2
>>>> +---
>>>> +$id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>>> +
>>>> +title: Aspeed FSI master
>>>> +
>>>> +maintainers:
>>>> + - Eddie James <[email protected]>
>>>> +
>>>> +description:
>>>> + The AST2600 and later contain two identical FSI masters. They share a
>>>> + clock and have a separate interrupt line and output pins.
>>>> +
>>>> +properties:
>>>> + compatible:
>>>> + enum:
>>>> + - aspeed,ast2600-fsi-master
>>>> + - aspeed,ast2700-fsi-master
>>> There was no such compatible before.
>>>
>>> How does this even validate? Where is fsi-master? You dropped a
>>> compatible without any explanation.
>>
>> I can make it a separate change to add ast2700.
>>
>>
>> I suppose I don't understand having two compatibles... Aspeed master
>> shouldn't use "fsi-master" as that is too generic, right? Why wouldn't
> Not necessarily, depends. Dropping it silently is confusing. What about
> other users? firmware, bootloaders, out-of-tree, other OS? Did you
> investigate all of them?
The old format file actually only used fsi-master in the example, not in
the actual properties description. So I didn't really drop a compatible.
Device trees using "fsi-master" are just buggy and should be fixed
eventually, but I don't think it needs to be part of this series.
Thanks,
Eddie
>
>> it validate? Devicetrees using "fsi-master" also use
>> "aspeed,ast2600-fsi-master" so they should be OK...
> No, because the compatibles do not match. Run validation and you will
> see the errors.
>
> I am fine with dropping such compatible, which is not used by current
> kernel ABI, but first DTS must be fixed and second some explanation and
> justification is needed.
>
> Best regards,
> Krzysztof
>