From: Sean Wang <[email protected]>
The property "mediatek,pctl" is only required for SoCs such as MT2701 and
MT7623, so adding a few words for stating the condition.
Signed-off-by: Sean Wang <[email protected]>
---
Documentation/devicetree/bindings/net/mediatek-net.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt
index 214eaa9..53c13ee 100644
--- a/Documentation/devicetree/bindings/net/mediatek-net.txt
+++ b/Documentation/devicetree/bindings/net/mediatek-net.txt
@@ -28,7 +28,7 @@ Required properties:
- mediatek,sgmiisys: phandle to the syscon node that handles the SGMII setup
which is required for those SoCs equipped with SGMII such as MT7622 SoC.
- mediatek,pctl: phandle to the syscon node that handles the ports slew rate
- and driver current
+ and driver current: only for MT2701 and MT7623 SoC
Optional properties:
- interrupt-parent: Should be the phandle for the interrupt controller
--
2.7.4
From: Sean Wang <[email protected]>
Remove superfluous pin setup to get out of accessing invalid I/O pin
registers because the way for pin configuring tends to be different from
various SoCs and thus it should be better being managed and controlled by
the pinctrl driver which MT7622 already can support.
Signed-off-by: Sean Wang <[email protected]>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 35 +++++++++++++++++------------
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 3 +++
2 files changed, 24 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index fc67e35..29826dd 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -1952,14 +1952,16 @@ static int mtk_hw_init(struct mtk_eth *eth)
}
regmap_write(eth->ethsys, ETHSYS_SYSCFG0, val);
- /* Set GE2 driving and slew rate */
- regmap_write(eth->pctl, GPIO_DRV_SEL10, 0xa00);
+ if (eth->pctl) {
+ /* Set GE2 driving and slew rate */
+ regmap_write(eth->pctl, GPIO_DRV_SEL10, 0xa00);
- /* set GE2 TDSEL */
- regmap_write(eth->pctl, GPIO_OD33_CTRL8, 0x5);
+ /* set GE2 TDSEL */
+ regmap_write(eth->pctl, GPIO_OD33_CTRL8, 0x5);
- /* set GE2 TUNE */
- regmap_write(eth->pctl, GPIO_BIAS_CTRL, 0x0);
+ /* set GE2 TUNE */
+ regmap_write(eth->pctl, GPIO_BIAS_CTRL, 0x0);
+ }
/* Set linkdown as the default for each GMAC. Its own MCR would be set
* up with the more appropriate value when mtk_phy_link_adjust call is
@@ -2538,11 +2540,13 @@ static int mtk_probe(struct platform_device *pdev)
}
}
- eth->pctl = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
- "mediatek,pctl");
- if (IS_ERR(eth->pctl)) {
- dev_err(&pdev->dev, "no pctl regmap found\n");
- return PTR_ERR(eth->pctl);
+ if (eth->soc->required_pctl) {
+ eth->pctl = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+ "mediatek,pctl");
+ if (IS_ERR(eth->pctl)) {
+ dev_err(&pdev->dev, "no pctl regmap found\n");
+ return PTR_ERR(eth->pctl);
+ }
}
for (i = 0; i < 3; i++) {
@@ -2668,17 +2672,20 @@ static int mtk_remove(struct platform_device *pdev)
static const struct mtk_soc_data mt2701_data = {
.caps = MTK_GMAC1_TRGMII,
- .required_clks = MT7623_CLKS_BITMAP
+ .required_clks = MT7623_CLKS_BITMAP,
+ .required_pctl = true,
};
static const struct mtk_soc_data mt7622_data = {
.caps = MTK_DUAL_GMAC_SHARED_SGMII | MTK_GMAC1_ESW,
- .required_clks = MT7622_CLKS_BITMAP
+ .required_clks = MT7622_CLKS_BITMAP,
+ .required_pctl = false,
};
static const struct mtk_soc_data mt7623_data = {
.caps = MTK_GMAC1_TRGMII,
- .required_clks = MT7623_CLKS_BITMAP
+ .required_clks = MT7623_CLKS_BITMAP,
+ .required_pctl = true,
};
const struct of_device_id of_mtk_match[] = {
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index a3af466..672b8c3 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -573,10 +573,13 @@ struct mtk_rx_ring {
* @caps Flags shown the extra capability for the SoC
* @required_clks Flags shown the bitmap for required clocks on
* the target SoC
+ * @required_pctl A bool value to show whether the SoC requires
+ * the extra setup for those pins used by GMAC.
*/
struct mtk_soc_data {
u32 caps;
u32 required_clks;
+ bool required_pctl;
};
/* currently no SoC has more than 2 macs */
--
2.7.4
On Wed, Dec 20, 2017 at 05:47:05PM +0800, [email protected] wrote:
> From: Sean Wang <[email protected]>
>
> The property "mediatek,pctl" is only required for SoCs such as MT2701 and
> MT7623, so adding a few words for stating the condition.
>
> Signed-off-by: Sean Wang <[email protected]>
> ---
> Documentation/devicetree/bindings/net/mediatek-net.txt | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Reviewed-by: Rob Herring <[email protected]>
From: <[email protected]>
Date: Wed, 20 Dec 2017 17:47:05 +0800
> From: Sean Wang <[email protected]>
>
> The property "mediatek,pctl" is only required for SoCs such as MT2701 and
> MT7623, so adding a few words for stating the condition.
>
> Signed-off-by: Sean Wang <[email protected]>
Applied to net-next.
From: <[email protected]>
Date: Wed, 20 Dec 2017 17:47:06 +0800
> From: Sean Wang <[email protected]>
>
> Remove superfluous pin setup to get out of accessing invalid I/O pin
> registers because the way for pin configuring tends to be different from
> various SoCs and thus it should be better being managed and controlled by
> the pinctrl driver which MT7622 already can support.
>
> Signed-off-by: Sean Wang <[email protected]>
Applied to net-next.