Add a base DT for SM6350 SoC
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/sm6350.dtsi | 487 +++++++++++++++++++++++++++
1 file changed, 487 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sm6350.dtsi
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
new file mode 100644
index 000000000000..9a9797f5a55b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -0,0 +1,487 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <[email protected]>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+ interrupt-parent = <&intc>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clocks {
+ xo_board: xo-board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <76800000>;
+ clock-output-names = "xo_board";
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32764>;
+ #clock-cells = <0>;
+ };
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "qcom,kryo560";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
+ next-level-cache = <&L2_0>;
+ #cooling-cells = <2>;
+ L2_0: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ L3_0: l3-cache {
+ compatible = "cache";
+ };
+ };
+ };
+
+ CPU1: cpu@100 {
+ device_type = "cpu";
+ compatible = "qcom,kryo560";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
+ next-level-cache = <&L2_100>;
+ #cooling-cells = <2>;
+ L2_100: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU2: cpu@200 {
+ device_type = "cpu";
+ compatible = "qcom,kryo560";
+ reg = <0x0 0x200>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
+ next-level-cache = <&L2_200>;
+ #cooling-cells = <2>;
+ L2_200: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU3: cpu@300 {
+ device_type = "cpu";
+ compatible = "qcom,kryo560";
+ reg = <0x0 0x300>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
+ next-level-cache = <&L2_300>;
+ #cooling-cells = <2>;
+ L2_300: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU4: cpu@400 {
+ device_type = "cpu";
+ compatible = "qcom,kryo560";
+ reg = <0x0 0x400>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
+ next-level-cache = <&L2_400>;
+ #cooling-cells = <2>;
+ L2_400: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU5: cpu@500 {
+ device_type = "cpu";
+ compatible = "qcom,kryo560";
+ reg = <0x0 0x500>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ dynamic-power-coefficient = <100>;
+ next-level-cache = <&L2_500>;
+ #cooling-cells = <2>;
+ L2_500: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+
+ };
+
+ CPU6: cpu@600 {
+ device_type = "cpu";
+ compatible = "qcom,kryo560";
+ reg = <0x0 0x600>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1894>;
+ dynamic-power-coefficient = <703>;
+ next-level-cache = <&L2_600>;
+ #cooling-cells = <2>;
+ L2_600: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU7: cpu@700 {
+ device_type = "cpu";
+ compatible = "qcom,kryo560";
+ reg = <0x0 0x700>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1894>;
+ dynamic-power-coefficient = <703>;
+ next-level-cache = <&L2_700>;
+ #cooling-cells = <2>;
+ L2_700: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+
+ core1 {
+ cpu = <&CPU1>;
+ };
+
+ core2 {
+ cpu = <&CPU2>;
+ };
+
+ core3 {
+ cpu = <&CPU3>;
+ };
+
+ core4 {
+ cpu = <&CPU4>;
+ };
+
+ core5 {
+ cpu = <&CPU5>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&CPU6>;
+ };
+
+ core1 {
+ cpu = <&CPU7>;
+ };
+ };
+ };
+ };
+
+ firmware {
+ scm: scm {
+ compatible = "qcom,scm-sm6350", "qcom,scm";
+ #reset-cells = <1>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the size */
+ reg = <0x0 0x80000000 0x0 0x0>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ reserved_memory: reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ hyp_mem: memory@80000000 {
+ reg = <0 0x80000000 0 0x600000>;
+ no-map;
+ };
+
+ xbl_aop_mem: memory@80700000 {
+ reg = <0 0x80700000 0 0x160000>;
+ no-map;
+ };
+
+ cmd_db: memory@80860000 {
+ compatible = "qcom,cmd-db";
+ reg = <0 0x80860000 0 0x20000>;
+ no-map;
+ };
+
+ sec_apps_mem: memory@808ff000 {
+ reg = <0 0x808ff000 0 0x1000>;
+ no-map;
+ };
+
+ smem_mem: memory@80900000 {
+ reg = <0 0x80900000 0 0x200000>;
+ no-map;
+ };
+
+ cdsp_sec_mem: memory@80b00000 {
+ reg = <0 0x80b00000 0 0x1e00000>;
+ no-map;
+ };
+
+ pil_camera_mem: memory@86000000 {
+ reg = <0 0x86000000 0 0x500000>;
+ no-map;
+ };
+
+ pil_npu_mem: memory@86500000 {
+ reg = <0 0x86500000 0 0x500000>;
+ no-map;
+ };
+
+ pil_video_mem: memory@86a00000 {
+ reg = <0 0x86a00000 0 0x500000>;
+ no-map;
+ };
+
+ pil_cdsp_mem: memory@86f00000 {
+ reg = <0 0x86f00000 0 0x1e00000>;
+ no-map;
+ };
+
+ pil_adsp_mem: memory@88d00000 {
+ reg = <0 0x88d00000 0 0x2800000>;
+ no-map;
+ };
+
+ wlan_fw_mem: memory@8b500000 {
+ reg = <0 0x8b500000 0 0x200000>;
+ no-map;
+ };
+
+ pil_ipa_fw_mem: memory@8b700000 {
+ reg = <0 0x8b700000 0 0x10000>;
+ no-map;
+ };
+
+ pil_ipa_gsi_mem: memory@8b710000 {
+ reg = <0 0x8b710000 0 0x5400>;
+ no-map;
+ };
+
+ pil_gpu_mem: memory@8b715400 {
+ reg = <0 0x8b715400 0 0x2000>;
+ no-map;
+ };
+
+ pil_modem_mem: memory@8b800000 {
+ reg = <0 0x8b800000 0 0xf800000>;
+ no-map;
+ };
+
+ cont_splash_memory: memory@a0000000 {
+ reg = <0 0xa0000000 0 0x2300000>;
+ no-map;
+ };
+
+ dfps_data_memory: memory@a2300000 {
+ reg = <0 0xa2300000 0 0x100000>;
+ no-map;
+ };
+
+ removed_region: memory@c0000000 {
+ reg = <0 0xc0000000 0 0x3900000>;
+ no-map;
+ };
+
+ debug_region: memory@ffb00000 {
+ reg = <0 0xffb00000 0 0xc0000>;
+ no-map;
+ };
+
+ last_log_region: memory@ffbc0000 {
+ reg = <0 0xffbc0000 0 0x40000>;
+ no-map;
+ };
+
+ ramoops: ramoops@ffc00000 {
+ compatible = "removed-dma-pool", "ramoops";
+ reg = <0 0xffc00000 0 0x00100000>;
+ record-size = <0x1000>;
+ console-size = <0x40000>;
+ ftrace-size = <0x0>;
+ msg-size = <0x20000 0x20000>;
+ cc-size = <0x0>;
+ no-map;
+ };
+
+ cmdline_region: memory@ffd00000 {
+ reg = <0 0xffd00000 0 0x1000>;
+ no-map;
+ };
+ };
+
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_mem>;
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ soc: soc@0 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0 0 0 0 0x10 0>;
+ dma-ranges = <0 0 0 0 0x10 0>;
+ compatible = "simple-bus";
+
+ ipcc: mailbox@408000 {
+ compatible = "qcom,sm6350-ipcc", "qcom,ipcc";
+ reg = <0 0x00408000 0 0x1000>;
+ interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #mbox-cells = <2>;
+ };
+
+ tcsr_mutex: hwlock@1f40000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0x0 0x01f40000 0x0 0x40000>;
+ #hwlock-cells = <1>;
+ };
+
+ pdc: interrupt-controller@b220000 {
+ compatible = "qcom,sm6350-pdc", "qcom,pdc";
+ reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x64>;
+ qcom,pdc-ranges = <0 480 94>, <94 609 31>,
+ <125 63 1>, <126 655 12>, <138 139 15>;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ };
+
+ intc: interrupt-controller@17a00000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
+ <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
+ interrupts = <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ watchdog@17c10000 {
+ compatible = "qcom,apss-wdt-sm6350", "qcom,kpss-wdt";
+ reg = <0 0x17c10000 0 0x1000>;
+ clocks = <&sleep_clk>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer@17c20000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x0 0x17c20000 0x0 0x1000>;
+ clock-frequency = <19200000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ frame@17c21000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c21000 0x0 0x1000>,
+ <0x0 0x17c22000 0x0 0x1000>;
+ };
+
+ frame@17c23000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c23000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c25000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c25000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c27000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c27000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c29000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c29000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c2b000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c2b000 0x0 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17c2d000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x17c2d000 0x0 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ apps_rsc: rsc@18200000 {
+ compatible = "qcom,rpmh-rsc";
+ label = "apps_rsc";
+ reg = <0x0 0x18200000 0x0 0x10000>,
+ <0x0 0x18210000 0x0 0x10000>,
+ <0x0 0x18220000 0x0 0x10000>;
+ reg-names = "drv-0", "drv-1", "drv-2";
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,tcs-offset = <0xd00>;
+ qcom,drv-id = <2>;
+ qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
+ <WAKE_TCS 3>, <CONTROL_TCS 1>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ clock-frequency = <19200000>;
+ interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+};
--
2.33.0
Hi,
On 8/28/2021 6:47 PM, Konrad Dybcio wrote:
> Add a base DT for SM6350 SoC
>
> Signed-off-by: Konrad Dybcio <[email protected]>
> ---
> arch/arm64/boot/dts/qcom/sm6350.dtsi | 487 +++++++++++++++++++++++++++
> 1 file changed, 487 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sm6350.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> new file mode 100644
> index 000000000000..9a9797f5a55b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> @@ -0,0 +1,487 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2021, Konrad Dybcio <[email protected]>
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/mailbox/qcom-ipcc.h>
> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +
> +/ {
> + interrupt-parent = <&intc>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + clocks {
> + xo_board: xo-board {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <76800000>;
> + clock-output-names = "xo_board";
> + };
> +
> + sleep_clk: sleep-clk {
> + compatible = "fixed-clock";
> + clock-frequency = <32764>;
> + #clock-cells = <0>;
> + };
> + };
> +
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + CPU0: cpu@0 {
> + device_type = "cpu";
> + compatible = "qcom,kryo560";
> + reg = <0x0 0x0>;
> + enable-method = "psci";
> + capacity-dmips-mhz = <1024>;
> + dynamic-power-coefficient = <100>;
> + next-level-cache = <&L2_0>;
> + #cooling-cells = <2>;
> + L2_0: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + L3_0: l3-cache {
> + compatible = "cache";
> + };
> + };
> + };
> +
> + CPU1: cpu@100 {
> + device_type = "cpu";
> + compatible = "qcom,kryo560";
> + reg = <0x0 0x100>;
> + enable-method = "psci";
> + capacity-dmips-mhz = <1024>;
> + dynamic-power-coefficient = <100>;
> + next-level-cache = <&L2_100>;
> + #cooling-cells = <2>;
> + L2_100: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU2: cpu@200 {
> + device_type = "cpu";
> + compatible = "qcom,kryo560";
> + reg = <0x0 0x200>;
> + enable-method = "psci";
> + capacity-dmips-mhz = <1024>;
> + dynamic-power-coefficient = <100>;
> + next-level-cache = <&L2_200>;
> + #cooling-cells = <2>;
> + L2_200: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU3: cpu@300 {
> + device_type = "cpu";
> + compatible = "qcom,kryo560";
> + reg = <0x0 0x300>;
> + enable-method = "psci";
> + capacity-dmips-mhz = <1024>;
> + dynamic-power-coefficient = <100>;
> + next-level-cache = <&L2_300>;
> + #cooling-cells = <2>;
> + L2_300: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU4: cpu@400 {
> + device_type = "cpu";
> + compatible = "qcom,kryo560";
> + reg = <0x0 0x400>;
> + enable-method = "psci";
> + capacity-dmips-mhz = <1024>;
> + dynamic-power-coefficient = <100>;
> + next-level-cache = <&L2_400>;
> + #cooling-cells = <2>;
> + L2_400: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU5: cpu@500 {
> + device_type = "cpu";
> + compatible = "qcom,kryo560";
> + reg = <0x0 0x500>;
> + enable-method = "psci";
> + capacity-dmips-mhz = <1024>;
> + dynamic-power-coefficient = <100>;
> + next-level-cache = <&L2_500>;
> + #cooling-cells = <2>;
> + L2_500: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> +
> + };
> +
> + CPU6: cpu@600 {
> + device_type = "cpu";
> + compatible = "qcom,kryo560";
> + reg = <0x0 0x600>;
> + enable-method = "psci";
> + capacity-dmips-mhz = <1894>;
> + dynamic-power-coefficient = <703>;
> + next-level-cache = <&L2_600>;
> + #cooling-cells = <2>;
> + L2_600: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU7: cpu@700 {
> + device_type = "cpu";
> + compatible = "qcom,kryo560";
> + reg = <0x0 0x700>;
> + enable-method = "psci";
> + capacity-dmips-mhz = <1894>;
> + dynamic-power-coefficient = <703>;
> + next-level-cache = <&L2_700>;
> + #cooling-cells = <2>;
> + L2_700: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&CPU0>;
> + };
> +
> + core1 {
> + cpu = <&CPU1>;
> + };
> +
> + core2 {
> + cpu = <&CPU2>;
> + };
> +
> + core3 {
> + cpu = <&CPU3>;
> + };
> +
> + core4 {
> + cpu = <&CPU4>;
> + };
> +
> + core5 {
> + cpu = <&CPU5>;
> + };
> + };
> +
> + cluster1 {
> + core0 {
> + cpu = <&CPU6>;
> + };
> +
> + core1 {
> + cpu = <&CPU7>;
> + };
> + };
> + };
> + };
> +
> + firmware {
> + scm: scm {
> + compatible = "qcom,scm-sm6350", "qcom,scm";
> + #reset-cells = <1>;
> + };
> + };
> +
> + memory@80000000 {
> + device_type = "memory";
> + /* We expect the bootloader to fill in the size */
> + reg = <0x0 0x80000000 0x0 0x0>;
> + };
> +
> + pmu {
> + compatible = "arm,armv8-pmuv3";
> + interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + reserved_memory: reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + hyp_mem: memory@80000000 {
> + reg = <0 0x80000000 0 0x600000>;
> + no-map;
> + };
> +
> + xbl_aop_mem: memory@80700000 {
> + reg = <0 0x80700000 0 0x160000>;
> + no-map;
> + };
> +
> + cmd_db: memory@80860000 {
> + compatible = "qcom,cmd-db";
> + reg = <0 0x80860000 0 0x20000>;
> + no-map;
> + };
> +
> + sec_apps_mem: memory@808ff000 {
> + reg = <0 0x808ff000 0 0x1000>;
> + no-map;
> + };
> +
> + smem_mem: memory@80900000 {
> + reg = <0 0x80900000 0 0x200000>;
> + no-map;
> + };
> +
> + cdsp_sec_mem: memory@80b00000 {
> + reg = <0 0x80b00000 0 0x1e00000>;
> + no-map;
> + };
> +
> + pil_camera_mem: memory@86000000 {
> + reg = <0 0x86000000 0 0x500000>;
> + no-map;
> + };
> +
> + pil_npu_mem: memory@86500000 {
> + reg = <0 0x86500000 0 0x500000>;
> + no-map;
> + };
> +
> + pil_video_mem: memory@86a00000 {
> + reg = <0 0x86a00000 0 0x500000>;
> + no-map;
> + };
> +
> + pil_cdsp_mem: memory@86f00000 {
> + reg = <0 0x86f00000 0 0x1e00000>;
> + no-map;
> + };
> +
> + pil_adsp_mem: memory@88d00000 {
> + reg = <0 0x88d00000 0 0x2800000>;
> + no-map;
> + };
> +
> + wlan_fw_mem: memory@8b500000 {
> + reg = <0 0x8b500000 0 0x200000>;
> + no-map;
> + };
> +
> + pil_ipa_fw_mem: memory@8b700000 {
> + reg = <0 0x8b700000 0 0x10000>;
> + no-map;
> + };
> +
> + pil_ipa_gsi_mem: memory@8b710000 {
> + reg = <0 0x8b710000 0 0x5400>;
> + no-map;
> + };
> +
> + pil_gpu_mem: memory@8b715400 {
> + reg = <0 0x8b715400 0 0x2000>;
> + no-map;
> + };
> +
> + pil_modem_mem: memory@8b800000 {
> + reg = <0 0x8b800000 0 0xf800000>;
> + no-map;
> + };
> +
> + cont_splash_memory: memory@a0000000 {
> + reg = <0 0xa0000000 0 0x2300000>;
> + no-map;
> + };
> +
> + dfps_data_memory: memory@a2300000 {
> + reg = <0 0xa2300000 0 0x100000>;
> + no-map;
> + };
> +
> + removed_region: memory@c0000000 {
> + reg = <0 0xc0000000 0 0x3900000>;
> + no-map;
> + };
> +
> + debug_region: memory@ffb00000 {
> + reg = <0 0xffb00000 0 0xc0000>;
> + no-map;
> + };
> +
> + last_log_region: memory@ffbc0000 {
> + reg = <0 0xffbc0000 0 0x40000>;
> + no-map;
> + };
> +
> + ramoops: ramoops@ffc00000 {
> + compatible = "removed-dma-pool", "ramoops";
> + reg = <0 0xffc00000 0 0x00100000>;
> + record-size = <0x1000>;
> + console-size = <0x40000>;
> + ftrace-size = <0x0>;
> + msg-size = <0x20000 0x20000>;
> + cc-size = <0x0>;
> + no-map;
> + };
> +
> + cmdline_region: memory@ffd00000 {
> + reg = <0 0xffd00000 0 0x1000>;
> + no-map;
> + };
> + };
> +
> + smem {
> + compatible = "qcom,smem";
> + memory-region = <&smem_mem>;
> + hwlocks = <&tcsr_mutex 3>;
> + };
> +
> + soc: soc@0 {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0 0 0 0 0x10 0>;
> + dma-ranges = <0 0 0 0 0x10 0>;
> + compatible = "simple-bus";
> +
> + ipcc: mailbox@408000 {
> + compatible = "qcom,sm6350-ipcc", "qcom,ipcc";
> + reg = <0 0x00408000 0 0x1000>;
> + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + #mbox-cells = <2>;
> + };
> +
> + tcsr_mutex: hwlock@1f40000 {
> + compatible = "qcom,tcsr-mutex";
> + reg = <0x0 0x01f40000 0x0 0x40000>;
> + #hwlock-cells = <1>;
> + };
> +
> + pdc: interrupt-controller@b220000 {
> + compatible = "qcom,sm6350-pdc", "qcom,pdc";
> + reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x64>;
The second reg 0x17c000f0 is neither documented nor used in PDC irq
chip driver. can you please remove it?
Thanks,
Maulik
> + qcom,pdc-ranges = <0 480 94>, <94 609 31>,
> + <125 63 1>, <126 655 12>, <138 139 15>;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&intc>;
> + interrupt-controller;
> + };
> +
> + intc: interrupt-controller@17a00000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
> + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
> + interrupts = <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + watchdog@17c10000 {
> + compatible = "qcom,apss-wdt-sm6350", "qcom,kpss-wdt";
> + reg = <0 0x17c10000 0 0x1000>;
> + clocks = <&sleep_clk>;
> + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + timer@17c20000 {
> + compatible = "arm,armv7-timer-mem";
> + reg = <0x0 0x17c20000 0x0 0x1000>;
> + clock-frequency = <19200000>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + frame@17c21000 {
> + frame-number = <0>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0 0x17c21000 0x0 0x1000>,
> + <0x0 0x17c22000 0x0 0x1000>;
> + };
> +
> + frame@17c23000 {
> + frame-number = <1>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0 0x17c23000 0x0 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c25000 {
> + frame-number = <2>;
> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0 0x17c25000 0x0 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c27000 {
> + frame-number = <3>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0 0x17c27000 0x0 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c29000 {
> + frame-number = <4>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0 0x17c29000 0x0 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c2b000 {
> + frame-number = <5>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0 0x17c2b000 0x0 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c2d000 {
> + frame-number = <6>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0 0x17c2d000 0x0 0x1000>;
> + status = "disabled";
> + };
> + };
> +
> + apps_rsc: rsc@18200000 {
> + compatible = "qcom,rpmh-rsc";
> + label = "apps_rsc";
> + reg = <0x0 0x18200000 0x0 0x10000>,
> + <0x0 0x18210000 0x0 0x10000>,
> + <0x0 0x18220000 0x0 0x10000>;
> + reg-names = "drv-0", "drv-1", "drv-2";
> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> + qcom,tcs-offset = <0xd00>;
> + qcom,drv-id = <2>;
> + qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
> + <WAKE_TCS 3>, <CONTROL_TCS 1>;
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + clock-frequency = <19200000>;
> + interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
> + };
> +};
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
>> +
>> + tcsr_mutex: hwlock@1f40000 {
>> + compatible = "qcom,tcsr-mutex";
>> + reg = <0x0 0x01f40000 0x0 0x40000>;
>> + #hwlock-cells = <1>;
>> + };
>> +
>> + pdc: interrupt-controller@b220000 {
>> + compatible = "qcom,sm6350-pdc", "qcom,pdc";
>> + reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x64>;
>
> The second reg 0x17c000f0 is neither documented nor used in PDC irq chip driver. can you please remove it?
>
> Thanks,
> Maulik
>
Wouldn't it make more sense to keep it (like in other PDC-enabled SoCs' device trees) so that there's no
need to add it back when the driver gains support for spi_configure_type (I believe that's what it's used for)?
Konrad
Hi,
On 8/28/2021 9:52 PM, Konrad Dybcio wrote:
>>> +
>>> + tcsr_mutex: hwlock@1f40000 {
>>> + compatible = "qcom,tcsr-mutex";
>>> + reg = <0x0 0x01f40000 0x0 0x40000>;
>>> + #hwlock-cells = <1>;
>>> + };
>>> +
>>> + pdc: interrupt-controller@b220000 {
>>> + compatible = "qcom,sm6350-pdc", "qcom,pdc";
>>> + reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x64>;
>> The second reg 0x17c000f0 is neither documented nor used in PDC irq chip driver. can you please remove it?
>>
>> Thanks,
>> Maulik
>>
> Wouldn't it make more sense to keep it (like in other PDC-enabled SoCs' device trees) so that there's no
>
> need to add it back when the driver gains support for spi_configure_type (I believe that's what it's used for)?
The second reg in some of the PDC enabled SoCs' went in since it may
have slipped throgh code reviews when using downstream
patch as is on upstream.
Also the bindings document for PDC is still in txt, so yaml check could
not catch the extra register which is not documented.
An attempt to add support for spi_configure_type [1] & [2] had
suggestion either to access second reg via mailbox or
add another level of irqchip hierarchy between PDC to GIC to configure
SPI type. Unless both [1] and [2] patch can go in as
PDC irqchip driver won't gain support to use it. (using mailbox approch
will have mailbox driver to access this register and PDC node may
mention which mailbox to use).
[1]
https://patchwork.kernel.org/project/linux-arm-msm/patch/[email protected]/
[2]
https://patchwork.kernel.org/project/linux-arm-msm/patch/[email protected]/
Thanks,
Maulik
>
>
> Konrad
>
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation