The hardware turns out to be pretty sluggish at assuming it can only
do USB2 with just a USB2 phy assigned to it - before it needed about
6 minutes to acknowledge that.
Limit it to USB-HS explicitly to make USB come up about 720x faster.
Fixes: 9da65e441d4d ("arm64: dts: qcom: Add support for SONY Xperia X Performance / XZ / XZs (msm8996, Tone platform)")
Signed-off-by: Konrad Dybcio <[email protected]>
---
No words.
arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
index 12a7b6d91dbe..0ab9687f3406 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
@@ -991,10 +991,6 @@ touch_int_sleep: touch-int-sleep-state {
};
};
-/*
- * For reasons that are currently unknown (but probably related to fusb301), USB takes about
- * 6 minutes to wake up (nothing interesting in kernel logs), but then it works as it should.
- */
&usb3 {
status = "okay";
qcom,select-utmi-as-pipe-clk;
@@ -1003,6 +999,7 @@ &usb3 {
&usb3_dwc3 {
extcon = <&usb3_id>;
dr_mode = "peripheral";
+ maximum-speed = "high-speed";
phys = <&hsusb_phy1>;
phy-names = "usb2-phy";
snps,hird-threshold = /bits/ 8 <0>;
--
2.38.1
On 24/11/2022 23:01, Konrad Dybcio wrote:
> The hardware turns out to be pretty sluggish at assuming it can only
> do USB2 with just a USB2 phy assigned to it - before it needed about
> 6 minutes to acknowledge that.
>
> Limit it to USB-HS explicitly to make USB come up about 720x faster.
>
> Fixes: 9da65e441d4d ("arm64: dts: qcom: Add support for SONY Xperia X Performance / XZ / XZs (msm8996, Tone platform)")
> Signed-off-by: Konrad Dybcio <[email protected]>
> ---
> No words.
>
> arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi | 5 +----
> 1 file changed, 1 insertion(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
> index 12a7b6d91dbe..0ab9687f3406 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
> @@ -991,10 +991,6 @@ touch_int_sleep: touch-int-sleep-state {
> };
> };
>
> -/*
> - * For reasons that are currently unknown (but probably related to fusb301), USB takes about
> - * 6 minutes to wake up (nothing interesting in kernel logs), but then it works as it should.
> - */
> &usb3 {
> status = "okay";
> qcom,select-utmi-as-pipe-clk;
> @@ -1003,6 +999,7 @@ &usb3 {
> &usb3_dwc3 {
> extcon = <&usb3_id>;
> dr_mode = "peripheral";
> + maximum-speed = "high-speed";
> phys = <&hsusb_phy1>;
> phy-names = "usb2-phy";
> snps,hird-threshold = /bits/ 8 <0>;
Reviewed-by: Neil Armstrong <[email protected]>
On Thu, 24 Nov 2022 23:01:47 +0100, Konrad Dybcio wrote:
> The hardware turns out to be pretty sluggish at assuming it can only
> do USB2 with just a USB2 phy assigned to it - before it needed about
> 6 minutes to acknowledge that.
>
> Limit it to USB-HS explicitly to make USB come up about 720x faster.
>
>
> [...]
Applied, thanks!
[1/1] arm64: dts: qcom: msm8996-tone: Fix USB taking 6 minutes to wake up
commit: 43069b9cd358aebc692e654de91ee06ff66e26af
Best regards,
--
Bjorn Andersson <[email protected]>