This patch modified set_cs_timing parameter, no need pass in spi_delay
to set_cs_timing callback.
By the way, we modified the mediatek and tegra114 spi driver to fix build err.
In mediatek spi driver, We have support set absolute time not clk_count,
and call this function in prepare_message not user's API.
Signed-off-by: Mason Zhang <[email protected]>
---
drivers/spi/spi-mt65xx.c | 107 +++++++++++++++++++++----------------
drivers/spi/spi-tegra114.c | 8 +--
include/linux/spi/spi.h | 3 +-
3 files changed, 66 insertions(+), 52 deletions(-)
diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 6f2925118b98..bb09592bc009 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -208,6 +208,65 @@ static void mtk_spi_reset(struct mtk_spi *mdata)
writel(reg_val, mdata->base + SPI_CMD_REG);
}
+static int mtk_spi_set_hw_cs_timing(struct spi_device *spi)
+{
+ struct mtk_spi *mdata = spi_master_get_devdata(spi->master);
+ struct spi_delay *cs_setup = &spi->cs_setup;
+ struct spi_delay *cs_hold = &spi->cs_hold;
+ struct spi_delay *cs_inactive = &spi->cs_inactive;
+ u16 setup, hold, inactive;
+ u32 reg_val;
+ int delay;
+
+ delay = spi_delay_to_ns(cs_setup, NULL);
+ if (delay < 0)
+ return delay;
+ setup = (delay * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000)) / 1000;
+
+ delay = spi_delay_to_ns(cs_hold, NULL);
+ if (delay < 0)
+ return delay;
+ hold = (delay * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000)) / 1000;
+
+ delay = spi_delay_to_ns(cs_inactive, NULL);
+ if (delay < 0)
+ return delay;
+ inactive = (delay * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000)) / 1000;
+
+ setup = setup ? setup : 1;
+ hold = hold ? hold : 1;
+ inactive = inactive ? inactive : 1;
+
+ reg_val = readl(mdata->base + SPI_CFG0_REG);
+ if (mdata->dev_comp->enhance_timing) {
+ hold = min(hold, 0xffff);
+ setup = min(setup, 0xffff);
+ reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
+ reg_val |= (((hold - 1) & 0xffff)
+ << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
+ reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
+ reg_val |= (((setup - 1) & 0xffff)
+ << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
+ } else {
+ hold = min(hold, 0xff);
+ setup = min(setup, 0xff);
+ reg_val &= ~(0xff << SPI_CFG0_CS_HOLD_OFFSET);
+ reg_val |= (((hold - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET);
+ reg_val &= ~(0xff << SPI_CFG0_CS_SETUP_OFFSET);
+ reg_val |= (((setup - 1) & 0xff)
+ << SPI_CFG0_CS_SETUP_OFFSET);
+ }
+ writel(reg_val, mdata->base + SPI_CFG0_REG);
+
+ inactive = min(inactive, 0xff);
+ reg_val = readl(mdata->base + SPI_CFG1_REG);
+ reg_val &= ~SPI_CFG1_CS_IDLE_MASK;
+ reg_val |= (((inactive - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET);
+ writel(reg_val, mdata->base + SPI_CFG1_REG);
+
+ return 0;
+}
+
static int mtk_spi_prepare_message(struct spi_master *master,
struct spi_message *msg)
{
@@ -284,6 +343,8 @@ static int mtk_spi_prepare_message(struct spi_master *master,
<< SPI_CFG1_GET_TICK_DLY_OFFSET);
writel(reg_val, mdata->base + SPI_CFG1_REG);
+ /* set hw cs timing */
+ mtk_spi_set_hw_cs_timing(spi);
return 0;
}
@@ -528,52 +589,6 @@ static bool mtk_spi_can_dma(struct spi_master *master,
(unsigned long)xfer->rx_buf % 4 == 0);
}
-static int mtk_spi_set_hw_cs_timing(struct spi_device *spi,
- struct spi_delay *setup,
- struct spi_delay *hold,
- struct spi_delay *inactive)
-{
- struct mtk_spi *mdata = spi_master_get_devdata(spi->master);
- u16 setup_dly, hold_dly, inactive_dly;
- u32 reg_val;
-
- if ((setup && setup->unit != SPI_DELAY_UNIT_SCK) ||
- (hold && hold->unit != SPI_DELAY_UNIT_SCK) ||
- (inactive && inactive->unit != SPI_DELAY_UNIT_SCK)) {
- dev_err(&spi->dev,
- "Invalid delay unit, should be SPI_DELAY_UNIT_SCK\n");
- return -EINVAL;
- }
-
- setup_dly = setup ? setup->value : 1;
- hold_dly = hold ? hold->value : 1;
- inactive_dly = inactive ? inactive->value : 1;
-
- reg_val = readl(mdata->base + SPI_CFG0_REG);
- if (mdata->dev_comp->enhance_timing) {
- reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
- reg_val |= (((hold_dly - 1) & 0xffff)
- << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
- reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
- reg_val |= (((setup_dly - 1) & 0xffff)
- << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
- } else {
- reg_val &= ~(0xff << SPI_CFG0_CS_HOLD_OFFSET);
- reg_val |= (((hold_dly - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET);
- reg_val &= ~(0xff << SPI_CFG0_CS_SETUP_OFFSET);
- reg_val |= (((setup_dly - 1) & 0xff)
- << SPI_CFG0_CS_SETUP_OFFSET);
- }
- writel(reg_val, mdata->base + SPI_CFG0_REG);
-
- reg_val = readl(mdata->base + SPI_CFG1_REG);
- reg_val &= ~SPI_CFG1_CS_IDLE_MASK;
- reg_val |= (((inactive_dly - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET);
- writel(reg_val, mdata->base + SPI_CFG1_REG);
-
- return 0;
-}
-
static int mtk_spi_setup(struct spi_device *spi)
{
struct mtk_spi *mdata = spi_master_get_devdata(spi->master);
diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c
index 5131141bbf0d..e9de1d958bbd 100644
--- a/drivers/spi/spi-tegra114.c
+++ b/drivers/spi/spi-tegra114.c
@@ -717,12 +717,12 @@ static void tegra_spi_deinit_dma_param(struct tegra_spi_data *tspi,
dma_release_channel(dma_chan);
}
-static int tegra_spi_set_hw_cs_timing(struct spi_device *spi,
- struct spi_delay *setup,
- struct spi_delay *hold,
- struct spi_delay *inactive)
+static int tegra_spi_set_hw_cs_timing(struct spi_device *spi)
{
struct tegra_spi_data *tspi = spi_master_get_devdata(spi->master);
+ struct spi_delay *setup = &spi->cs_setup;
+ struct spi_delay *hold = &spi->cs_hold;
+ struct spi_delay *inactive = &spi->cs_inactive;
u8 setup_dly, hold_dly, inactive_dly;
u32 setup_hold;
u32 spi_cs_timing;
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 651e19ba3415..fe027efb85c2 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -553,8 +553,7 @@ struct spi_controller {
* to configure specific CS timing through spi_set_cs_timing() after
* spi_setup().
*/
- int (*set_cs_timing)(struct spi_device *spi, struct spi_delay *setup,
- struct spi_delay *hold, struct spi_delay *inactive);
+ int (*set_cs_timing)(struct spi_device *spi);
/* bidirectional bulk transfers
*
--
2.18.0
On Wed, 4 Aug 2021 21:37:47 +0800, Mason Zhang wrote:
> This patch modified set_cs_timing parameter, no need pass in spi_delay
> to set_cs_timing callback.
> By the way, we modified the mediatek and tegra114 spi driver to fix build err.
> In mediatek spi driver, We have support set absolute time not clk_count,
> and call this function in prepare_message not user's API.
>
>
> [...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
Thanks!
[2/2] spi: modify set_cs_timing parameter
commit: 04e6bb0d6bb127bac929fb35edd2dd01613c9520
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
On 04.08.21 15:37, Mason Zhang wrote:
> This patch modified set_cs_timing parameter, no need pass in spi_delay
> to set_cs_timing callback.
> By the way, we modified the mediatek and tegra114 spi driver to fix build err.
> In mediatek spi driver, We have support set absolute time not clk_count,
> and call this function in prepare_message not user's API.
>
Hi,
that patch cause a regression on mt8173 elm device, it produces the errors:
cros-ec-i2c-tunnel 1100a000.spi:ec@0:i2c-tunnel0: Error transferring EC i2c message -71
cros-ec-spi spi0.0: EC failed to respond in time.
Could you please write on which mediatek platform it was tested and why is it needed?
> Signed-off-by: Mason Zhang <[email protected]>
> ---
> drivers/spi/spi-mt65xx.c | 107 +++++++++++++++++++++----------------
> drivers/spi/spi-tegra114.c | 8 +--
> include/linux/spi/spi.h | 3 +-
> 3 files changed, 66 insertions(+), 52 deletions(-)
>
> diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
> index 6f2925118b98..bb09592bc009 100644
> --- a/drivers/spi/spi-mt65xx.c
> +++ b/drivers/spi/spi-mt65xx.c
> @@ -208,6 +208,65 @@ static void mtk_spi_reset(struct mtk_spi *mdata)
> writel(reg_val, mdata->base + SPI_CMD_REG);
> }
>
> +static int mtk_spi_set_hw_cs_timing(struct spi_device *spi)
> +{
> + struct mtk_spi *mdata = spi_master_get_devdata(spi->master);
> + struct spi_delay *cs_setup = &spi->cs_setup;
> + struct spi_delay *cs_hold = &spi->cs_hold;
> + struct spi_delay *cs_inactive = &spi->cs_inactive;
I don't see where those 3 values are ever set
Thanks,
Dafna
> + u16 setup, hold, inactive;
> + u32 reg_val;
> + int delay;
> +
> + delay = spi_delay_to_ns(cs_setup, NULL);
> + if (delay < 0)
> + return delay;
> + setup = (delay * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000)) / 1000;
> +
> + delay = spi_delay_to_ns(cs_hold, NULL);
> + if (delay < 0)
> + return delay;
> + hold = (delay * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000)) / 1000;
> +
> + delay = spi_delay_to_ns(cs_inactive, NULL);
> + if (delay < 0)
> + return delay;
> + inactive = (delay * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000)) / 1000;
> +
> + setup = setup ? setup : 1;
> + hold = hold ? hold : 1;
> + inactive = inactive ? inactive : 1;
> +
> + reg_val = readl(mdata->base + SPI_CFG0_REG);
> + if (mdata->dev_comp->enhance_timing) {
> + hold = min(hold, 0xffff);
> + setup = min(setup, 0xffff);
> + reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
> + reg_val |= (((hold - 1) & 0xffff)
> + << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
> + reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
> + reg_val |= (((setup - 1) & 0xffff)
> + << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
> + } else {
> + hold = min(hold, 0xff);
> + setup = min(setup, 0xff);
> + reg_val &= ~(0xff << SPI_CFG0_CS_HOLD_OFFSET);
> + reg_val |= (((hold - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET);
> + reg_val &= ~(0xff << SPI_CFG0_CS_SETUP_OFFSET);
> + reg_val |= (((setup - 1) & 0xff)
> + << SPI_CFG0_CS_SETUP_OFFSET);
> + }
> + writel(reg_val, mdata->base + SPI_CFG0_REG);
> +
> + inactive = min(inactive, 0xff);
> + reg_val = readl(mdata->base + SPI_CFG1_REG);
> + reg_val &= ~SPI_CFG1_CS_IDLE_MASK;
> + reg_val |= (((inactive - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET);
> + writel(reg_val, mdata->base + SPI_CFG1_REG);
> +
> + return 0;
> +}
> +
> static int mtk_spi_prepare_message(struct spi_master *master,
> struct spi_message *msg)
> {
> @@ -284,6 +343,8 @@ static int mtk_spi_prepare_message(struct spi_master *master,
> << SPI_CFG1_GET_TICK_DLY_OFFSET);
> writel(reg_val, mdata->base + SPI_CFG1_REG);
>
> + /* set hw cs timing */
> + mtk_spi_set_hw_cs_timing(spi);
> return 0;
> }
>
> @@ -528,52 +589,6 @@ static bool mtk_spi_can_dma(struct spi_master *master,
> (unsigned long)xfer->rx_buf % 4 == 0);
> }
>
> -static int mtk_spi_set_hw_cs_timing(struct spi_device *spi,
> - struct spi_delay *setup,
> - struct spi_delay *hold,
> - struct spi_delay *inactive)
> -{
> - struct mtk_spi *mdata = spi_master_get_devdata(spi->master);
> - u16 setup_dly, hold_dly, inactive_dly;
> - u32 reg_val;
> -
> - if ((setup && setup->unit != SPI_DELAY_UNIT_SCK) ||
> - (hold && hold->unit != SPI_DELAY_UNIT_SCK) ||
> - (inactive && inactive->unit != SPI_DELAY_UNIT_SCK)) {
> - dev_err(&spi->dev,
> - "Invalid delay unit, should be SPI_DELAY_UNIT_SCK\n");
> - return -EINVAL;
> - }
> -
> - setup_dly = setup ? setup->value : 1;
> - hold_dly = hold ? hold->value : 1;
> - inactive_dly = inactive ? inactive->value : 1;
> -
> - reg_val = readl(mdata->base + SPI_CFG0_REG);
> - if (mdata->dev_comp->enhance_timing) {
> - reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
> - reg_val |= (((hold_dly - 1) & 0xffff)
> - << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
> - reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
> - reg_val |= (((setup_dly - 1) & 0xffff)
> - << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
> - } else {
> - reg_val &= ~(0xff << SPI_CFG0_CS_HOLD_OFFSET);
> - reg_val |= (((hold_dly - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET);
> - reg_val &= ~(0xff << SPI_CFG0_CS_SETUP_OFFSET);
> - reg_val |= (((setup_dly - 1) & 0xff)
> - << SPI_CFG0_CS_SETUP_OFFSET);
> - }
> - writel(reg_val, mdata->base + SPI_CFG0_REG);
> -
> - reg_val = readl(mdata->base + SPI_CFG1_REG);
> - reg_val &= ~SPI_CFG1_CS_IDLE_MASK;
> - reg_val |= (((inactive_dly - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET);
> - writel(reg_val, mdata->base + SPI_CFG1_REG);
> -
> - return 0;
> -}
> -
> static int mtk_spi_setup(struct spi_device *spi)
> {
> struct mtk_spi *mdata = spi_master_get_devdata(spi->master);
> diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c
> index 5131141bbf0d..e9de1d958bbd 100644
> --- a/drivers/spi/spi-tegra114.c
> +++ b/drivers/spi/spi-tegra114.c
> @@ -717,12 +717,12 @@ static void tegra_spi_deinit_dma_param(struct tegra_spi_data *tspi,
> dma_release_channel(dma_chan);
> }
>
> -static int tegra_spi_set_hw_cs_timing(struct spi_device *spi,
> - struct spi_delay *setup,
> - struct spi_delay *hold,
> - struct spi_delay *inactive)
> +static int tegra_spi_set_hw_cs_timing(struct spi_device *spi)
> {
> struct tegra_spi_data *tspi = spi_master_get_devdata(spi->master);
> + struct spi_delay *setup = &spi->cs_setup;
> + struct spi_delay *hold = &spi->cs_hold;
> + struct spi_delay *inactive = &spi->cs_inactive;
> u8 setup_dly, hold_dly, inactive_dly;
> u32 setup_hold;
> u32 spi_cs_timing;
> diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
> index 651e19ba3415..fe027efb85c2 100644
> --- a/include/linux/spi/spi.h
> +++ b/include/linux/spi/spi.h
> @@ -553,8 +553,7 @@ struct spi_controller {
> * to configure specific CS timing through spi_set_cs_timing() after
> * spi_setup().
> */
> - int (*set_cs_timing)(struct spi_device *spi, struct spi_delay *setup,
> - struct spi_delay *hold, struct spi_delay *inactive);
> + int (*set_cs_timing)(struct spi_device *spi);
>
> /* bidirectional bulk transfers
> *
>