Convert the STM32 external interrupt controller (EXTI) binding to DT
schema format using json-schema.
Signed-off-by: Alexandre Torgue <[email protected]>
---
Hi Rob,
I planned to use "additionalProperties: false" for this schema but as I add a
property under condition, I got an error (property added under contion seems
to be detected as an "additional" property and then error is raised).
Is there a way to fix that ?
regards
Alex
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
deleted file mode 100644
index cd01b2292ec6..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-STM32 External Interrupt Controller
-
-Required properties:
-
-- compatible: Should be:
- "st,stm32-exti"
- "st,stm32h7-exti"
- "st,stm32mp1-exti"
-- reg: Specifies base physical address and size of the registers
-- interrupt-controller: Indentifies the node as an interrupt controller
-- #interrupt-cells: Specifies the number of cells to encode an interrupt
- specifier, shall be 2
-- interrupts: interrupts references to primary interrupt controller
- (only needed for exti controller with multiple exti under
- same parent interrupt: st,stm32-exti and st,stm32h7-exti)
-
-Optional properties:
-
-- hwlocks: reference to a phandle of a hardware spinlock provider node.
-
-Example:
-
-exti: interrupt-controller@40013c00 {
- compatible = "st,stm32-exti";
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x40013C00 0x400>;
- interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
new file mode 100644
index 000000000000..39be37e1e532
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/st,stm32-exti.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32 External Interrupt Controller Device Tree Bindings
+
+maintainers:
+ - Alexandre Torgue <[email protected]>
+ - Ludovic Barre <[email protected]>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - st,stm32-exti
+ - st,stm32h7-exti
+ - items:
+ - enum:
+ - st,stm32mp1-exti
+ - const: syscon
+
+ "#interrupt-cells":
+ const: 2
+
+ reg:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ hwlocks:
+ maxItems: 1
+ description:
+ Reference to a phandle of a hardware spinlock provider node.
+
+required:
+ - "#interrupt-cells"
+ - compatible
+ - reg
+ - interrupt-controller
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - st,stm32-exti
+ - st,stm32h7-exti
+ then:
+ properties:
+ interrupts:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ Interrupts references to primary interrupt controller
+ required:
+ - interrupts
+
+examples:
+ - |
+ //Example 1
+ exti1: interrupt-controller@5000d000 {
+ compatible = "st,stm32mp1-exti", "syscon";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000d000 0x400>;
+ };
+
+ //Example 2
+ exti2: interrupt-controller@40013c00 {
+ compatible = "st,stm32-exti";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x40013C00 0x400>;
+ interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
+ };
+
+...
--
2.17.1
On Thu, Nov 14, 2019 at 10:41 AM Alexandre Torgue
<[email protected]> wrote:
>
> Convert the STM32 external interrupt controller (EXTI) binding to DT
> schema format using json-schema.
>
> Signed-off-by: Alexandre Torgue <[email protected]>
> ---
>
> Hi Rob,
>
> I planned to use "additionalProperties: false" for this schema but as I add a
> property under condition, I got an error (property added under contion seems
> to be detected as an "additional" property and then error is raised).
>
> Is there a way to fix that ?
See below.
>
> regards
> Alex
>
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
> deleted file mode 100644
> index cd01b2292ec6..000000000000
> --- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
> +++ /dev/null
> @@ -1,29 +0,0 @@
> -STM32 External Interrupt Controller
> -
> -Required properties:
> -
> -- compatible: Should be:
> - "st,stm32-exti"
> - "st,stm32h7-exti"
> - "st,stm32mp1-exti"
> -- reg: Specifies base physical address and size of the registers
> -- interrupt-controller: Indentifies the node as an interrupt controller
> -- #interrupt-cells: Specifies the number of cells to encode an interrupt
> - specifier, shall be 2
> -- interrupts: interrupts references to primary interrupt controller
> - (only needed for exti controller with multiple exti under
> - same parent interrupt: st,stm32-exti and st,stm32h7-exti)
> -
> -Optional properties:
> -
> -- hwlocks: reference to a phandle of a hardware spinlock provider node.
> -
> -Example:
> -
> -exti: interrupt-controller@40013c00 {
> - compatible = "st,stm32-exti";
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - reg = <0x40013C00 0x400>;
> - interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
> -};
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
> new file mode 100644
> index 000000000000..39be37e1e532
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
> @@ -0,0 +1,82 @@
> +# SPDX-License-Identifier: GPL-2.0
If ST has copyright on the old binding, can you add BSD here.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/interrupt-controller/st,stm32-exti.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STM32 External Interrupt Controller Device Tree Bindings
> +
> +maintainers:
> + - Alexandre Torgue <[email protected]>
> + - Ludovic Barre <[email protected]>
> +
> +properties:
> + compatible:
> + oneOf:
> + - items:
> + - enum:
> + - st,stm32-exti
> + - st,stm32h7-exti
> + - items:
> + - enum:
> + - st,stm32mp1-exti
> + - const: syscon
> +
> + "#interrupt-cells":
> + const: 2
> +
> + reg:
> + maxItems: 1
> +
> + interrupt-controller: true
> +
> + hwlocks:
> + maxItems: 1
> + description:
> + Reference to a phandle of a hardware spinlock provider node.
> +
> +required:
> + - "#interrupt-cells"
> + - compatible
> + - reg
> + - interrupt-controller
> +
> +allOf:
> + - $ref: /schemas/interrupt-controller.yaml#
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - st,stm32-exti
> + - st,stm32h7-exti
> + then:
> + properties:
> + interrupts:
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32-array
Standard property, doesn't need a type. You just need 'maxItems' or an
'items' list if the index is not meaningful. This appears to be the
former case.
> + description:
> + Interrupts references to primary interrupt controller
> + required:
> + - interrupts
You can move the definition to the main section as you only need
'required' here. That should fix your additionalProperties issue.
In hindsight, the mp1 case probably should have used interrupt-map.
> +
> +examples:
> + - |
> + //Example 1
> + exti1: interrupt-controller@5000d000 {
> + compatible = "st,stm32mp1-exti", "syscon";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + reg = <0x5000d000 0x400>;
> + };
> +
> + //Example 2
> + exti2: interrupt-controller@40013c00 {
> + compatible = "st,stm32-exti";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + reg = <0x40013C00 0x400>;
> + interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
> + };
> +
> +...
> --
> 2.17.1
>
On 11/14/19 6:18 PM, Rob Herring wrote:
> On Thu, Nov 14, 2019 at 10:41 AM Alexandre Torgue
> <[email protected]> wrote:
>>
>> Convert the STM32 external interrupt controller (EXTI) binding to DT
>> schema format using json-schema.
>>
>> Signed-off-by: Alexandre Torgue <[email protected]>
>> ---
>>
>> Hi Rob,
>>
>> I planned to use "additionalProperties: false" for this schema but as I add a
>> property under condition, I got an error (property added under contion seems
>> to be detected as an "additional" property and then error is raised).
>>
>> Is there a way to fix that ?
>
> See below.
>
>>
>> regards
>> Alex
>>
>> diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
>> deleted file mode 100644
>> index cd01b2292ec6..000000000000
>> --- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
>> +++ /dev/null
>> @@ -1,29 +0,0 @@
>> -STM32 External Interrupt Controller
>> -
>> -Required properties:
>> -
>> -- compatible: Should be:
>> - "st,stm32-exti"
>> - "st,stm32h7-exti"
>> - "st,stm32mp1-exti"
>> -- reg: Specifies base physical address and size of the registers
>> -- interrupt-controller: Indentifies the node as an interrupt controller
>> -- #interrupt-cells: Specifies the number of cells to encode an interrupt
>> - specifier, shall be 2
>> -- interrupts: interrupts references to primary interrupt controller
>> - (only needed for exti controller with multiple exti under
>> - same parent interrupt: st,stm32-exti and st,stm32h7-exti)
>> -
>> -Optional properties:
>> -
>> -- hwlocks: reference to a phandle of a hardware spinlock provider node.
>> -
>> -Example:
>> -
>> -exti: interrupt-controller@40013c00 {
>> - compatible = "st,stm32-exti";
>> - interrupt-controller;
>> - #interrupt-cells = <2>;
>> - reg = <0x40013C00 0x400>;
>> - interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
>> -};
>> diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
>> new file mode 100644
>> index 000000000000..39be37e1e532
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
>> @@ -0,0 +1,82 @@
>> +# SPDX-License-Identifier: GPL-2.0
>
> If ST has copyright on the old binding, can you add BSD here.
>
I will.
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/interrupt-controller/st,stm32-exti.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: STM32 External Interrupt Controller Device Tree Bindings
>> +
>> +maintainers:
>> + - Alexandre Torgue <[email protected]>
>> + - Ludovic Barre <[email protected]>
>> +
>> +properties:
>> + compatible:
>> + oneOf:
>> + - items:
>> + - enum:
>> + - st,stm32-exti
>> + - st,stm32h7-exti
>> + - items:
>> + - enum:
>> + - st,stm32mp1-exti
>> + - const: syscon
>> +
>> + "#interrupt-cells":
>> + const: 2
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + interrupt-controller: true
>> +
>> + hwlocks:
>> + maxItems: 1
>> + description:
>> + Reference to a phandle of a hardware spinlock provider node.
>> +
>> +required:
>> + - "#interrupt-cells"
>> + - compatible
>> + - reg
>> + - interrupt-controller
>> +
>> +allOf:
>> + - $ref: /schemas/interrupt-controller.yaml#
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + enum:
>> + - st,stm32-exti
>> + - st,stm32h7-exti
>> + then:
>> + properties:
>> + interrupts:
>> + allOf:
>> + - $ref: /schemas/types.yaml#/definitions/uint32-array
>
> Standard property, doesn't need a type. You just need 'maxItems' or an
> 'items' list if the index is not meaningful. This appears to be the
> former case.
ok
>
>> + description:
>> + Interrupts references to primary interrupt controller
>> + required:
>> + - interrupts
>
> You can move the definition to the main section as you only need
> 'required' here. That should fix your additionalProperties issue.
>
Doing that it fails as I don't have interrupts define for mp1
compatible. Maybe I missed something ?
> In hindsight, the mp1 case probably should have used interrupt-map.
For MP1 driver is written differently and mapping is done inside the driver.
>
>> +
>> +examples:
>> + - |
>> + //Example 1
>> + exti1: interrupt-controller@5000d000 {
>> + compatible = "st,stm32mp1-exti", "syscon";
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + reg = <0x5000d000 0x400>;
>> + };
>> +
>> + //Example 2
>> + exti2: interrupt-controller@40013c00 {
>> + compatible = "st,stm32-exti";
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + reg = <0x40013C00 0x400>;
>> + interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
>> + };
>> +
>> +...
>> --
>> 2.17.1
>>
On Fri, Nov 15, 2019 at 11:28 AM Alexandre Torgue
<[email protected]> wrote:
>
>
>
> On 11/14/19 6:18 PM, Rob Herring wrote:
> > On Thu, Nov 14, 2019 at 10:41 AM Alexandre Torgue
> > <[email protected]> wrote:
> >>
> >> Convert the STM32 external interrupt controller (EXTI) binding to DT
> >> schema format using json-schema.
> >>
> >> Signed-off-by: Alexandre Torgue <[email protected]>
> >> ---
> >>
> >> Hi Rob,
> >>
> >> I planned to use "additionalProperties: false" for this schema but as I add a
> >> property under condition, I got an error (property added under contion seems
> >> to be detected as an "additional" property and then error is raised).
> >>
> >> Is there a way to fix that ?
> >
> > See below.
> >
> >>
> >> regards
> >> Alex
> >>
> >> diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
> >> deleted file mode 100644
> >> index cd01b2292ec6..000000000000
> >> --- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
> >> +++ /dev/null
> >> @@ -1,29 +0,0 @@
> >> -STM32 External Interrupt Controller
> >> -
> >> -Required properties:
> >> -
> >> -- compatible: Should be:
> >> - "st,stm32-exti"
> >> - "st,stm32h7-exti"
> >> - "st,stm32mp1-exti"
> >> -- reg: Specifies base physical address and size of the registers
> >> -- interrupt-controller: Indentifies the node as an interrupt controller
> >> -- #interrupt-cells: Specifies the number of cells to encode an interrupt
> >> - specifier, shall be 2
> >> -- interrupts: interrupts references to primary interrupt controller
> >> - (only needed for exti controller with multiple exti under
> >> - same parent interrupt: st,stm32-exti and st,stm32h7-exti)
> >> -
> >> -Optional properties:
> >> -
> >> -- hwlocks: reference to a phandle of a hardware spinlock provider node.
> >> -
> >> -Example:
> >> -
> >> -exti: interrupt-controller@40013c00 {
> >> - compatible = "st,stm32-exti";
> >> - interrupt-controller;
> >> - #interrupt-cells = <2>;
> >> - reg = <0x40013C00 0x400>;
> >> - interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
> >> -};
> >> diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
> >> new file mode 100644
> >> index 000000000000..39be37e1e532
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
> >> @@ -0,0 +1,82 @@
> >> +# SPDX-License-Identifier: GPL-2.0
> >
> > If ST has copyright on the old binding, can you add BSD here.
> >
>
> I will.
>
> >> +%YAML 1.2
> >> +---
> >> +$id: http://devicetree.org/schemas/interrupt-controller/st,stm32-exti.yaml#
> >> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> >> +
> >> +title: STM32 External Interrupt Controller Device Tree Bindings
> >> +
> >> +maintainers:
> >> + - Alexandre Torgue <[email protected]>
> >> + - Ludovic Barre <[email protected]>
> >> +
> >> +properties:
> >> + compatible:
> >> + oneOf:
> >> + - items:
> >> + - enum:
> >> + - st,stm32-exti
> >> + - st,stm32h7-exti
> >> + - items:
> >> + - enum:
> >> + - st,stm32mp1-exti
> >> + - const: syscon
> >> +
> >> + "#interrupt-cells":
> >> + const: 2
> >> +
> >> + reg:
> >> + maxItems: 1
> >> +
> >> + interrupt-controller: true
> >> +
> >> + hwlocks:
> >> + maxItems: 1
> >> + description:
> >> + Reference to a phandle of a hardware spinlock provider node.
> >> +
> >> +required:
> >> + - "#interrupt-cells"
> >> + - compatible
> >> + - reg
> >> + - interrupt-controller
> >> +
> >> +allOf:
> >> + - $ref: /schemas/interrupt-controller.yaml#
> >> + - if:
> >> + properties:
> >> + compatible:
> >> + contains:
> >> + enum:
> >> + - st,stm32-exti
> >> + - st,stm32h7-exti
> >> + then:
> >> + properties:
> >> + interrupts:
> >> + allOf:
> >> + - $ref: /schemas/types.yaml#/definitions/uint32-array
> >
> > Standard property, doesn't need a type. You just need 'maxItems' or an
> > 'items' list if the index is not meaningful. This appears to be the
> > former case.
>
> ok
>
> >
> >> + description:
> >> + Interrupts references to primary interrupt controller
> >> + required:
> >> + - interrupts
> >
> > You can move the definition to the main section as you only need
> > 'required' here. That should fix your additionalProperties issue.
> >
> Doing that it fails as I don't have interrupts define for mp1
> compatible. Maybe I missed something ?
Like this:
properties:
...
interrupts:
maxItems: ??
minItems: ??
allOf:
- $ref: /schemas/interrupt-controller.yaml#
- if:
properties:
compatible:
contains:
enum:
- st,stm32-exti
- st,stm32h7-exti
then:
required:
- interrupts
On 11/15/19 6:41 PM, Rob Herring wrote:
> On Fri, Nov 15, 2019 at 11:28 AM Alexandre Torgue
> <[email protected]> wrote:
>>
>>
>>
>> On 11/14/19 6:18 PM, Rob Herring wrote:
>>> On Thu, Nov 14, 2019 at 10:41 AM Alexandre Torgue
>>> <[email protected]> wrote:
>>>>
>>>> Convert the STM32 external interrupt controller (EXTI) binding to DT
>>>> schema format using json-schema.
>>>>
>>>> Signed-off-by: Alexandre Torgue <[email protected]>
>>>> ---
>>>>
>>>> Hi Rob,
>>>>
>>>> I planned to use "additionalProperties: false" for this schema but as I add a
>>>> property under condition, I got an error (property added under contion seems
>>>> to be detected as an "additional" property and then error is raised).
>>>>
>>>> Is there a way to fix that ?
>>>
>>> See below.
>>>
>>>>
>>>> regards
>>>> Alex
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
>>>> deleted file mode 100644
>>>> index cd01b2292ec6..000000000000
>>>> --- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
>>>> +++ /dev/null
>>>> @@ -1,29 +0,0 @@
>>>> -STM32 External Interrupt Controller
>>>> -
>>>> -Required properties:
>>>> -
>>>> -- compatible: Should be:
>>>> - "st,stm32-exti"
>>>> - "st,stm32h7-exti"
>>>> - "st,stm32mp1-exti"
>>>> -- reg: Specifies base physical address and size of the registers
>>>> -- interrupt-controller: Indentifies the node as an interrupt controller
>>>> -- #interrupt-cells: Specifies the number of cells to encode an interrupt
>>>> - specifier, shall be 2
>>>> -- interrupts: interrupts references to primary interrupt controller
>>>> - (only needed for exti controller with multiple exti under
>>>> - same parent interrupt: st,stm32-exti and st,stm32h7-exti)
>>>> -
>>>> -Optional properties:
>>>> -
>>>> -- hwlocks: reference to a phandle of a hardware spinlock provider node.
>>>> -
>>>> -Example:
>>>> -
>>>> -exti: interrupt-controller@40013c00 {
>>>> - compatible = "st,stm32-exti";
>>>> - interrupt-controller;
>>>> - #interrupt-cells = <2>;
>>>> - reg = <0x40013C00 0x400>;
>>>> - interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
>>>> -};
>>>> diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
>>>> new file mode 100644
>>>> index 000000000000..39be37e1e532
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
>>>> @@ -0,0 +1,82 @@
>>>> +# SPDX-License-Identifier: GPL-2.0
>>>
>>> If ST has copyright on the old binding, can you add BSD here.
>>>
>>
>> I will.
>>
>>>> +%YAML 1.2
>>>> +---
>>>> +$id: http://devicetree.org/schemas/interrupt-controller/st,stm32-exti.yaml#
>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>>> +
>>>> +title: STM32 External Interrupt Controller Device Tree Bindings
>>>> +
>>>> +maintainers:
>>>> + - Alexandre Torgue <[email protected]>
>>>> + - Ludovic Barre <[email protected]>
>>>> +
>>>> +properties:
>>>> + compatible:
>>>> + oneOf:
>>>> + - items:
>>>> + - enum:
>>>> + - st,stm32-exti
>>>> + - st,stm32h7-exti
>>>> + - items:
>>>> + - enum:
>>>> + - st,stm32mp1-exti
>>>> + - const: syscon
>>>> +
>>>> + "#interrupt-cells":
>>>> + const: 2
>>>> +
>>>> + reg:
>>>> + maxItems: 1
>>>> +
>>>> + interrupt-controller: true
>>>> +
>>>> + hwlocks:
>>>> + maxItems: 1
>>>> + description:
>>>> + Reference to a phandle of a hardware spinlock provider node.
>>>> +
>>>> +required:
>>>> + - "#interrupt-cells"
>>>> + - compatible
>>>> + - reg
>>>> + - interrupt-controller
>>>> +
>>>> +allOf:
>>>> + - $ref: /schemas/interrupt-controller.yaml#
>>>> + - if:
>>>> + properties:
>>>> + compatible:
>>>> + contains:
>>>> + enum:
>>>> + - st,stm32-exti
>>>> + - st,stm32h7-exti
>>>> + then:
>>>> + properties:
>>>> + interrupts:
>>>> + allOf:
>>>> + - $ref: /schemas/types.yaml#/definitions/uint32-array
>>>
>>> Standard property, doesn't need a type. You just need 'maxItems' or an
>>> 'items' list if the index is not meaningful. This appears to be the
>>> former case.
>>
>> ok
>>
>>>
>>>> + description:
>>>> + Interrupts references to primary interrupt controller
>>>> + required:
>>>> + - interrupts
>>>
>>> You can move the definition to the main section as you only need
>>> 'required' here. That should fix your additionalProperties issue.
>>>
>> Doing that it fails as I don't have interrupts define for mp1
>> compatible. Maybe I missed something ?
>
> Like this:
>
> properties:
> ...
> interrupts:
> maxItems: ??
> minItems: ??
>
> allOf:
> - $ref: /schemas/interrupt-controller.yaml#
> - if:
> properties:
> compatible:
> contains:
> enum:
> - st,stm32-exti
> - st,stm32h7-exti
> then:
> required:
> - interrupts
>
Yes it is better :). Let me send the V2
Thanks
Alex