On 20/01/2023 21:53, Arınç ÜNAL wrote:
> Yeia sou!
>
γεια σας!
Whole series applied, thanks!
> I initially just wanted to submit the phy muxing patch for BPI-R2 but after
> looking around the bindings, I decided to do a bit of a cleanup.
>
> The main takeaway of the cleanup is that the MT7530 switch is actually a
> part of the multi-chip module on the MT7623AI SoC. I'm moving the bindings
> for this switch to mt7623a.dtsi so they don't need to be defined on every
> device with this SoC. This should ease it up for supporting more devices
> with MT7623AI SoC on mainline.
>
> I don't know if there's a pin wired for interrupt. The switch is going to
> work with polling for the time being. Folks from MediaTek, feel free to
> fill me in on this.
>
> I've tested phy muxing on my BPI-R2. DTs compile fine.
>
> Arınç ÜNAL (5):
> arm: dts: mt7623: add gmacs to mt7623.dtsi
> arm: dts: mt7623: add mt7530 switch to mt7623a.dtsi
> arm: dts: mt7623: change mt7530 switch address
> arm: dts: mt7623: mux phy0 on Bananapi BPI-R2
> arm: dts: mt7623: enable flow control on port@6
>
> arch/arm/boot/dts/mt7623.dtsi | 14 ++++
> arch/arm/boot/dts/mt7623a-rfb-emmc.dts | 86 ++++++----------------
> arch/arm/boot/dts/mt7623a-rfb-nand.dts | 86 ++++++----------------
> arch/arm/boot/dts/mt7623a.dtsi | 74 +++++++++++++++++++
> arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 22 +++---
> arch/arm/boot/dts/mt7623n-rfb-emmc.dts | 13 ++--
> 6 files changed, 147 insertions(+), 148 deletions(-)
>
>