2023-04-18 10:09:44

by Krzysztof Kozlowski

Subject: [PATCH] arm64: dts: qcom: sm8550: use uint16 for Soundwire interval

The Soundwire bindings changed during review, after the SM8550 DTS
Soundwire nodes were merged. Switch to uint16 for Soundwire
qcom,ports-sinterval property, to match with current bindings.

Fixes: 61b006389bb7 ("arm64: dts: qcom: sm8550: add Soundwire controllers")
Signed-off-by: Krzysztof Kozlowski <[email protected]>

---

Fix for v6.4-rc1.

Bindings v3 (with uint16):
https://lore.kernel.org/linux-arm-msm/[email protected]/T/#md34302ec02eebdbe3e4defef79a40b32a7e621b8
---
arch/arm64/boot/dts/qcom/sm8550.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 6e9bad8f6f33..80a01ff3ee30 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -2022,7 +2022,7 @@ swr3: soundwire-controller@6ab0000 {
qcom,din-ports = <4>;
qcom,dout-ports = <9>;

- qcom,ports-sinterval = <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
+ qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
@@ -2068,7 +2068,7 @@ swr1: soundwire-controller@6ad0000 {
qcom,din-ports = <0>;
qcom,dout-ports = <10>;

- qcom,ports-sinterval = <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>;
+ qcom,ports-sinterval = /bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>;
qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>;
qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
@@ -2133,7 +2133,7 @@ swr0: soundwire-controller@6b10000 {
qcom,din-ports = <4>;
qcom,dout-ports = <9>;

- qcom,ports-sinterval = <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
+ qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
--
2.34.1

2023-04-18 10:12:32

by Konrad Dybcio

Subject: Re: [PATCH] arm64: dts: qcom: sm8550: use uint16 for Soundwire interval

On 18.04.2023 11:57, Krzysztof Kozlowski wrote:
> The Soundwire bindings changed during review, after the SM8550 DTS
> Soundwire nodes were merged. Switch to uint16 for Soundwire
> qcom,ports-sinterval property, to match with current bindings.
>
> Fixes: 61b006389bb7 ("arm64: dts: qcom: sm8550: add Soundwire controllers")
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
>
> ---
Reviewed-by: Konrad Dybcio <[email protected]>

Konrad
>
> Fix for v6.4-rc1.
>
> Bindings v3 (with uint16):
> https://lore.kernel.org/linux-arm-msm/[email protected]/T/#md34302ec02eebdbe3e4defef79a40b32a7e621b8
> ---
> arch/arm64/boot/dts/qcom/sm8550.dtsi | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> index 6e9bad8f6f33..80a01ff3ee30 100644
> --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> @@ -2022,7 +2022,7 @@ swr3: soundwire-controller@6ab0000 {
> qcom,din-ports = <4>;
> qcom,dout-ports = <9>;
>
> - qcom,ports-sinterval = <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
> + qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
> qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
> qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
> qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
> @@ -2068,7 +2068,7 @@ swr1: soundwire-controller@6ad0000 {
> qcom,din-ports = <0>;
> qcom,dout-ports = <10>;
>
> - qcom,ports-sinterval = <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>;
> + qcom,ports-sinterval = /bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>;
> qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>;
> qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
> qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
> @@ -2133,7 +2133,7 @@ swr0: soundwire-controller@6b10000 {
> qcom,din-ports = <4>;
> qcom,dout-ports = <9>;
>
> - qcom,ports-sinterval = <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
> + qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
> qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
> qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
> qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;

2023-05-25 05:43:49

by Bjorn Andersson

Subject: Re: [PATCH] arm64: dts: qcom: sm8550: use uint16 for Soundwire interval

On Tue, 18 Apr 2023 11:57:34 +0200, Krzysztof Kozlowski wrote:
> The Soundwire bindings changed during review, after the SM8550 DTS
> Soundwire nodes were merged. Switch to uint16 for Soundwire
> qcom,ports-sinterval property, to match with current bindings.
>
>

Applied, thanks!

[1/1] arm64: dts: qcom: sm8550: use uint16 for Soundwire interval
commit: 4c8bb2d567588ccbfbf374c079f291a1402c4454

Best regards,
--
Bjorn Andersson <[email protected]>