The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warnings:
arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <[email protected]>
---
arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi
index db1bc511e71f..758eaf9d93d2 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi
@@ -46,7 +46,7 @@
/ {
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm1 0 5000000>;
+ pwms = <&pwm1 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
@@ -346,7 +346,6 @@ &pcie {
};
&pwm1 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
--
2.43.0