2019-08-11 20:01:34

by Denis Efremov (Oracle)

[permalink] [raw]
Subject: [PATCH v2 2/4] PCI: pciehp: Switch LED indicators with a single write

This patch replaces all consecutive switches of power and attention
indicators with pciehp_set_indicators() call. Thus, performing only
single write to a register.

Reviewed-by: Lukas Wunner <[email protected]>
Signed-off-by: Denis Efremov <[email protected]>
---
drivers/pci/hotplug/pciehp_ctrl.c | 14 +++++---------
drivers/pci/hotplug/pciehp_hpc.c | 3 +--
2 files changed, 6 insertions(+), 11 deletions(-)

diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index 631ced0ab28a..258a4060466d 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -42,8 +42,7 @@ static void set_slot_off(struct controller *ctrl)
msleep(1000);
}

- pciehp_green_led_off(ctrl);
- pciehp_set_attention_status(ctrl, 1);
+ pciehp_set_indicators(ctrl, PWR_OFF, ATTN_ON);
}

/**
@@ -90,8 +89,7 @@ static int board_added(struct controller *ctrl)
}
}

- pciehp_green_led_on(ctrl);
- pciehp_set_attention_status(ctrl, 0);
+ pciehp_set_indicators(ctrl, PWR_ON, ATTN_OFF);
return 0;

err_exit:
@@ -172,8 +170,7 @@ void pciehp_handle_button_press(struct controller *ctrl)
slot_name(ctrl));
}
/* blink green LED and turn off amber */
- pciehp_green_led_blink(ctrl);
- pciehp_set_attention_status(ctrl, 0);
+ pciehp_set_indicators(ctrl, PWR_BLINK, ATTN_OFF);
schedule_delayed_work(&ctrl->button_work, 5 * HZ);
break;
case BLINKINGOFF_STATE:
@@ -187,12 +184,11 @@ void pciehp_handle_button_press(struct controller *ctrl)
cancel_delayed_work(&ctrl->button_work);
if (ctrl->state == BLINKINGOFF_STATE) {
ctrl->state = ON_STATE;
- pciehp_green_led_on(ctrl);
+ pciehp_set_indicators(ctrl, PWR_ON, ATTN_OFF);
} else {
ctrl->state = OFF_STATE;
- pciehp_green_led_off(ctrl);
+ pciehp_set_indicators(ctrl, PWR_OFF, ATTN_OFF);
}
- pciehp_set_attention_status(ctrl, 0);
ctrl_info(ctrl, "Slot(%s): Action canceled due to button press\n",
slot_name(ctrl));
break;
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 5a690b1579ec..68b880bc30db 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -676,8 +676,7 @@ static irqreturn_t pciehp_ist(int irq, void *dev_id)
if ((events & PCI_EXP_SLTSTA_PFD) && !ctrl->power_fault_detected) {
ctrl->power_fault_detected = 1;
ctrl_err(ctrl, "Slot(%s): Power fault\n", slot_name(ctrl));
- pciehp_set_attention_status(ctrl, 1);
- pciehp_green_led_off(ctrl);
+ pciehp_set_indicators(ctrl, PWR_OFF, ATTN_ON);
}

/*
--
2.21.0


Subject: Re: [PATCH v2 2/4] PCI: pciehp: Switch LED indicators with a single write

Hi,

On 8/11/19 12:59 PM, Denis Efremov wrote:
> This patch replaces all consecutive switches of power and attention
> indicators with pciehp_set_indicators() call. Thus, performing only
> single write to a register.
>
> Reviewed-by: Lukas Wunner <[email protected]>
> Signed-off-by: Denis Efremov <[email protected]>
Reviewed-by: Kuppuswamy Sathyanarayanan
<[email protected]>
> ---
> drivers/pci/hotplug/pciehp_ctrl.c | 14 +++++---------
> drivers/pci/hotplug/pciehp_hpc.c | 3 +--
> 2 files changed, 6 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
> index 631ced0ab28a..258a4060466d 100644
> --- a/drivers/pci/hotplug/pciehp_ctrl.c
> +++ b/drivers/pci/hotplug/pciehp_ctrl.c
> @@ -42,8 +42,7 @@ static void set_slot_off(struct controller *ctrl)
> msleep(1000);
> }
>
> - pciehp_green_led_off(ctrl);
> - pciehp_set_attention_status(ctrl, 1);
> + pciehp_set_indicators(ctrl, PWR_OFF, ATTN_ON);
> }
>
> /**
> @@ -90,8 +89,7 @@ static int board_added(struct controller *ctrl)
> }
> }
>
> - pciehp_green_led_on(ctrl);
> - pciehp_set_attention_status(ctrl, 0);
> + pciehp_set_indicators(ctrl, PWR_ON, ATTN_OFF);
> return 0;
>
> err_exit:
> @@ -172,8 +170,7 @@ void pciehp_handle_button_press(struct controller *ctrl)
> slot_name(ctrl));
> }
> /* blink green LED and turn off amber */
> - pciehp_green_led_blink(ctrl);
> - pciehp_set_attention_status(ctrl, 0);
> + pciehp_set_indicators(ctrl, PWR_BLINK, ATTN_OFF);
> schedule_delayed_work(&ctrl->button_work, 5 * HZ);
> break;
> case BLINKINGOFF_STATE:
> @@ -187,12 +184,11 @@ void pciehp_handle_button_press(struct controller *ctrl)
> cancel_delayed_work(&ctrl->button_work);
> if (ctrl->state == BLINKINGOFF_STATE) {
> ctrl->state = ON_STATE;
> - pciehp_green_led_on(ctrl);
> + pciehp_set_indicators(ctrl, PWR_ON, ATTN_OFF);
> } else {
> ctrl->state = OFF_STATE;
> - pciehp_green_led_off(ctrl);
> + pciehp_set_indicators(ctrl, PWR_OFF, ATTN_OFF);
> }
> - pciehp_set_attention_status(ctrl, 0);
> ctrl_info(ctrl, "Slot(%s): Action canceled due to button press\n",
> slot_name(ctrl));
> break;
> diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
> index 5a690b1579ec..68b880bc30db 100644
> --- a/drivers/pci/hotplug/pciehp_hpc.c
> +++ b/drivers/pci/hotplug/pciehp_hpc.c
> @@ -676,8 +676,7 @@ static irqreturn_t pciehp_ist(int irq, void *dev_id)
> if ((events & PCI_EXP_SLTSTA_PFD) && !ctrl->power_fault_detected) {
> ctrl->power_fault_detected = 1;
> ctrl_err(ctrl, "Slot(%s): Power fault\n", slot_name(ctrl));
> - pciehp_set_attention_status(ctrl, 1);
> - pciehp_green_led_off(ctrl);
> + pciehp_set_indicators(ctrl, PWR_OFF, ATTN_ON);
> }
>
> /*

--
Sathyanarayanan Kuppuswamy
Linux kernel developer