X1000/E has a third UART2 pin group selection, which uses the TDI(G2) as RX
and TDO(G1) as TX. This configuration is becoming increasingly popular in
newer core boards, such as the Halley2 v4.1. This is done by enabling
function 1 of a "virtual pin" PC31. See section 19.3.3 of the X1000
Programming Manual for details.
Signed-off-by: Yunian Yang <[email protected]>
---
drivers/pinctrl/pinctrl-ingenic.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c
index 2712f51eb238..29709059d62b 100644
--- a/drivers/pinctrl/pinctrl-ingenic.c
+++ b/drivers/pinctrl/pinctrl-ingenic.c
@@ -1982,6 +1982,7 @@ static int x1000_uart1_data_a_pins[] = { 0x04, 0x05, };
static int x1000_uart1_data_d_pins[] = { 0x62, 0x63, };
static int x1000_uart1_hwflow_pins[] = { 0x64, 0x65, };
static int x1000_uart2_data_a_pins[] = { 0x02, 0x03, };
+static int x1000_uart2_data_c_pins[] = { 0x5f, 0x5f, };
static int x1000_uart2_data_d_pins[] = { 0x65, 0x64, };
static int x1000_sfc_data_pins[] = { 0x1d, 0x1c, 0x1e, 0x1f, };
static int x1000_sfc_clk_pins[] = { 0x1a, };
@@ -2058,6 +2059,7 @@ static const struct group_desc x1000_groups[] = {
INGENIC_PIN_GROUP("uart1-data-d", x1000_uart1_data_d, 1),
INGENIC_PIN_GROUP("uart1-hwflow", x1000_uart1_hwflow, 1),
INGENIC_PIN_GROUP("uart2-data-a", x1000_uart2_data_a, 2),
+ INGENIC_PIN_GROUP("uart2-data-c", x1000_uart2_data_c, 1),
INGENIC_PIN_GROUP("uart2-data-d", x1000_uart2_data_d, 0),
INGENIC_PIN_GROUP("sfc-data", x1000_sfc_data, 1),
INGENIC_PIN_GROUP("sfc-clk", x1000_sfc_clk, 1),
@@ -2115,7 +2117,7 @@ static const char *x1000_uart0_groups[] = { "uart0-data", "uart0-hwflow", };
static const char *x1000_uart1_groups[] = {
"uart1-data-a", "uart1-data-d", "uart1-hwflow",
};
-static const char *x1000_uart2_groups[] = { "uart2-data-a", "uart2-data-d", };
+static const char *x1000_uart2_groups[] = { "uart2-data-a", "uart2-data-c", "uart2-data-d", };
static const char *x1000_sfc_groups[] = { "sfc-data", "sfc-clk", "sfc-ce", };
static const char *x1000_ssi_groups[] = {
"ssi-dt-a-22", "ssi-dt-a-29", "ssi-dt-d",
--
2.30.2