This is a patch series for thermal driver for Sunplus SP7021 SoC.
Sunplus SP7021 is an ARM Cortex A7 (4 cores) based SoC. It integrates
many peripherals (ex: UART, I2C, SPI, SDIO, eMMC, USB, SD card and
etc.) into a single chip. It is designed for industrial control.
Refer to:
https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/overview
https://tibbo.com/store/plus1.html
Li-hao Kuo (2):
thermal: Add thermal driver for Sunplus SP7021
dt-bindings:thermal: Add Sunplus SP7021 schema
.../bindings/thermal/sunplus_thermal.yaml | 49 +++++++
MAINTAINERS | 7 +
drivers/thermal/Kconfig | 10 ++
drivers/thermal/Makefile | 1 +
drivers/thermal/sunplus_thermal.c | 157 +++++++++++++++++++++
5 files changed, 224 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/sunplus_thermal.yaml
create mode 100644 drivers/thermal/sunplus_thermal.c
--
2.7.4
Add thermal driver for Sunplus SP7021.
Signed-off-by: Li-hao Kuo <[email protected]>
---
Changes in v4:
- Modify yaml file remove reg name and change nvmem name
MAINTAINERS | 6 ++
drivers/thermal/Kconfig | 10 +++
drivers/thermal/Makefile | 1 +
drivers/thermal/sunplus_thermal.c | 157 ++++++++++++++++++++++++++++++++++++++
4 files changed, 174 insertions(+)
create mode 100644 drivers/thermal/sunplus_thermal.c
diff --git a/MAINTAINERS b/MAINTAINERS
index dc4a137..e41b265 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18423,6 +18423,12 @@ L: [email protected]
S: Maintained
F: drivers/net/ethernet/dlink/sundance.c
+SUNPLUS THERMAL DRIVER
+M: Li-hao Kuo <[email protected]>
+L: [email protected]
+S: Maintained
+F: drivers/thermal/sunplus_thermal.c
+
SUPERH
M: Yoshinori Sato <[email protected]>
M: Rich Felker <[email protected]>
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index e37691e..98647c7 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -502,4 +502,14 @@ config KHADAS_MCU_FAN_THERMAL
If you say yes here you get support for the FAN controlled
by the Microcontroller found on the Khadas VIM boards.
+config SUNPLUS_THERMAL
+ tristate "Sunplus thermal drivers"
+ depends on SOC_SP7021
+ help
+ This the Sunplus SP7021 thermal driver, which supports the primitive
+ temperature sensor embedded in Sunplus SP7021 SoC.
+
+ If you have a Sunplus SP7021 platform say Y here and enable this option
+ to have support for thermal management
+
endif
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index f0c36a1..2f7417a 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -61,3 +61,4 @@ obj-$(CONFIG_UNIPHIER_THERMAL) += uniphier_thermal.o
obj-$(CONFIG_AMLOGIC_THERMAL) += amlogic_thermal.o
obj-$(CONFIG_SPRD_THERMAL) += sprd_thermal.o
obj-$(CONFIG_KHADAS_MCU_FAN_THERMAL) += khadas_mcu_fan.o
+obj-$(CONFIG_SUNPLUS_THERMAL) += sunplus_thermal.o
\ No newline at end of file
diff --git a/drivers/thermal/sunplus_thermal.c b/drivers/thermal/sunplus_thermal.c
new file mode 100644
index 0000000..460c41d
--- /dev/null
+++ b/drivers/thermal/sunplus_thermal.c
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) Sunplus Inc.
+ * Author: Li-hao Kuo <[email protected]>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/rtc.h>
+#include <linux/thermal.h>
+
+#define DISABLE_THREMAL (BIT(31) | BIT(15))
+#define ENABLE_THREMAL BIT(31)
+#define SP_THREMAL_MASK GENMASK(10, 0)
+
+#define TEMP_RATE 608
+#define TEMP_BASE 3500
+#define TEMP_OTP_BASE 1518
+
+#define SP_THERMAL_CTL0_REG 0x0000
+#define SP_THERMAL_STS0_REG 0x0030
+
+/* common data structures */
+struct sp_thermal_data {
+ struct thermal_zone_device *pcb_tz;
+ struct platform_device *pdev;
+ enum thermal_device_mode mode;
+ long sensor_temp;
+ void __iomem *regs;
+ int otp_temp0;
+ int otp_temp1;
+ u32 id;
+};
+
+static char *sp7021_otp_coef_read(struct device *dev, ssize_t *len)
+{
+ char *ret = NULL;
+ struct nvmem_cell *c = nvmem_cell_get(dev, "calib");
+
+ if (IS_ERR_OR_NULL(c))
+ return NULL;
+
+ ret = nvmem_cell_read(c, len);
+ nvmem_cell_put(c);
+ return ret;
+}
+
+static void sp7021_get_otp_temp_coef(struct sp_thermal_data *sp_data, struct device *_d)
+{
+ ssize_t otp_l = 0;
+ char *otp_v;
+
+ otp_v = sp7021_otp_coef_read(_d, &otp_l);
+ if (otp_l < 3)
+ return;
+ if (IS_ERR_OR_NULL(otp_v))
+ return;
+ sp_data->otp_temp0 = otp_v[0] | (otp_v[1] << 8);
+ sp_data->otp_temp0 = otp_v[0] | (otp_v[1] << 8);
+ sp_data->otp_temp0 = FIELD_GET(SP_THREMAL_MASK, sp_data->otp_temp0);
+ sp_data->otp_temp1 = (otp_v[1] >> 3) | (otp_v[2] << 5);
+ sp_data->otp_temp1 = FIELD_GET(SP_THREMAL_MASK, sp_data->otp_temp1);
+ if (sp_data->otp_temp0 == 0)
+ sp_data->otp_temp0 = TEMP_OTP_BASE;
+}
+
+static int sp_thermal_get_sensor_temp(void *data, int *temp)
+{
+ struct sp_thermal_data *sp_data = data;
+ int t_code;
+
+ t_code = readl(sp_data->regs + SP_THERMAL_STS0_REG);
+ t_code = FIELD_GET(SP_THREMAL_MASK, t_code);
+ *temp = ((sp_data->otp_temp0 - t_code) * 10000 / TEMP_RATE) + TEMP_BASE;
+ *temp *= 10;
+ return 0;
+}
+
+static struct thermal_zone_of_device_ops sp_of_thermal_ops = {
+ .get_temp = sp_thermal_get_sensor_temp,
+};
+
+static int sp_thermal_register_sensor(struct platform_device *pdev, struct sp_thermal_data *data,
+ int index)
+{
+ int ret;
+
+ data->id = index;
+ data->pcb_tz = devm_thermal_zone_of_sensor_register(&pdev->dev,
+ data->id, data, &sp_of_thermal_ops);
+ if (!IS_ERR_OR_NULL(data->pcb_tz))
+ return 0;
+ ret = PTR_ERR(data->pcb_tz);
+ data->pcb_tz = NULL;
+ return ret;
+}
+
+static int sp7021_thermal_probe(struct platform_device *pdev)
+{
+ struct sp_thermal_data *sp_data;
+ struct resource *res;
+ int ret;
+
+ sp_data = devm_kzalloc(&(pdev->dev), sizeof(*sp_data), GFP_KERNEL);
+ if (!sp_data)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (IS_ERR(res))
+ return dev_err_probe(&(pdev->dev), PTR_ERR(res), "resource get fail\n");
+
+ sp_data->regs = devm_ioremap(&(pdev->dev), res->start, resource_size(res));
+ if (IS_ERR(sp_data->regs))
+ return dev_err_probe(&(pdev->dev), PTR_ERR(sp_data->regs), "mas_base get fail\n");
+
+ writel(ENABLE_THREMAL, sp_data->regs + SP_THERMAL_CTL0_REG);
+
+ platform_set_drvdata(pdev, sp_data);
+ sp7021_get_otp_temp_coef(sp_data, &pdev->dev);
+ ret = sp_thermal_register_sensor(pdev, sp_data, 0);
+
+ return ret;
+}
+
+static int sp7021_thermal_remove(struct platform_device *_pd)
+{
+ return 0;
+}
+
+static const struct of_device_id of_sp7021_thermal_ids[] = {
+ { .compatible = "sunplus,sp7021-thermal" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, of_sp7021_thermal_ids);
+
+static struct platform_driver sp7021_thermal_driver = {
+ .probe = sp7021_thermal_probe,
+ .remove = sp7021_thermal_remove,
+ .driver = {
+ .name = "sp7021-thermal",
+ .of_match_table = of_match_ptr(of_sp7021_thermal_ids),
+ },
+};
+module_platform_driver(sp7021_thermal_driver);
+
+MODULE_AUTHOR("Li-hao Kuo <[email protected]>");
+MODULE_DESCRIPTION("Thermal driver for SP7021 SoC");
+MODULE_LICENSE("GPL");
--
2.7.4
Add bindings for Sunplus SP7021 thermal driver
Signed-off-by: Li-hao Kuo <[email protected]>
---
Changes in v4:
- Modify yaml file remove reg name and change nvmem name
.../bindings/thermal/sunplus_thermal.yaml | 49 ++++++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 50 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/sunplus_thermal.yaml
diff --git a/Documentation/devicetree/bindings/thermal/sunplus_thermal.yaml b/Documentation/devicetree/bindings/thermal/sunplus_thermal.yaml
new file mode 100644
index 0000000..e0290fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/sunplus_thermal.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/sunplus_thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus Thermal controller
+
+maintainers:
+ - Li-hao Kuo <[email protected]>
+
+properties:
+ compatible:
+ enum:
+ - sunplus,sp7021-thermal
+
+ reg:
+ maxItems: 1
+
+ nvmem-cells:
+ maxItems: 1
+
+ nvmem-cell-names:
+ const: calib
+
+required:
+ - compatible
+ - reg
+ - nvmem-cells
+ - nvmem-cell-names
+
+additionalProperties: false
+
+examples:
+ - |
+ thermal@9c000280 {
+ compatible = "sunplus,sp7021-thermal";
+ reg = <0x9c000280 0x80>;
+ nvmem-cells = <&therm_calib>;
+ nvmem-cell-names = "calib";
+ };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index e41b265..5428385 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18427,6 +18427,7 @@ SUNPLUS THERMAL DRIVER
M: Li-hao Kuo <[email protected]>
L: [email protected]
S: Maintained
+F: Documentation/devicetree/bindings/thermal/sunplus_thermal.yaml
F: drivers/thermal/sunplus_thermal.c
SUPERH
--
2.7.4
On Fri, 14 Jan 2022 10:46:27 +0800, Li-hao Kuo wrote:
> Add bindings for Sunplus SP7021 thermal driver
>
> Signed-off-by: Li-hao Kuo <[email protected]>
> ---
> Changes in v4:
> - Modify yaml file remove reg name and change nvmem name
>
> .../bindings/thermal/sunplus_thermal.yaml | 49 ++++++++++++++++++++++
> MAINTAINERS | 1 +
> 2 files changed, 50 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/thermal/sunplus_thermal.yaml
>
Reviewed-by: Rob Herring <[email protected]>
On 14/01/2022 03:46, Li-hao Kuo wrote:
> Add thermal driver for Sunplus SP7021.
Please give a detailed description of the sensor so we can refer to the
changelog to understand the code below.
> Signed-off-by: Li-hao Kuo <[email protected]>
> ---
> Changes in v4:
> - Modify yaml file remove reg name and change nvmem name
>
> MAINTAINERS | 6 ++
> drivers/thermal/Kconfig | 10 +++
> drivers/thermal/Makefile | 1 +
> drivers/thermal/sunplus_thermal.c | 157 ++++++++++++++++++++++++++++++++++++++
> 4 files changed, 174 insertions(+)
> create mode 100644 drivers/thermal/sunplus_thermal.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index dc4a137..e41b265 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -18423,6 +18423,12 @@ L: [email protected]
> S: Maintained
> F: drivers/net/ethernet/dlink/sundance.c
>
> +SUNPLUS THERMAL DRIVER
> +M: Li-hao Kuo <[email protected]>
> +L: [email protected]
> +S: Maintained
> +F: drivers/thermal/sunplus_thermal.c
> +
> SUPERH
> M: Yoshinori Sato <[email protected]>
> M: Rich Felker <[email protected]>
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index e37691e..98647c7 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -502,4 +502,14 @@ config KHADAS_MCU_FAN_THERMAL
> If you say yes here you get support for the FAN controlled
> by the Microcontroller found on the Khadas VIM boards.
>
> +config SUNPLUS_THERMAL
> + tristate "Sunplus thermal drivers"
> + depends on SOC_SP7021
> + help
> + This the Sunplus SP7021 thermal driver, which supports the primitive
> + temperature sensor embedded in Sunplus SP7021 SoC.
> +
> + If you have a Sunplus SP7021 platform say Y here and enable this option
> + to have support for thermal management
> +
> endif
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index f0c36a1..2f7417a 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -61,3 +61,4 @@ obj-$(CONFIG_UNIPHIER_THERMAL) += uniphier_thermal.o
> obj-$(CONFIG_AMLOGIC_THERMAL) += amlogic_thermal.o
> obj-$(CONFIG_SPRD_THERMAL) += sprd_thermal.o
> obj-$(CONFIG_KHADAS_MCU_FAN_THERMAL) += khadas_mcu_fan.o
> +obj-$(CONFIG_SUNPLUS_THERMAL) += sunplus_thermal.o
> \ No newline at end of file
> diff --git a/drivers/thermal/sunplus_thermal.c b/drivers/thermal/sunplus_thermal.c
> new file mode 100644
> index 0000000..460c41d
> --- /dev/null
> +++ b/drivers/thermal/sunplus_thermal.c
> @@ -0,0 +1,157 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) Sunplus Inc.
> + * Author: Li-hao Kuo <[email protected]>
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/cpufreq.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/nvmem-consumer.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +#include <linux/rtc.h>
> +#include <linux/thermal.h>
Please check the headers above. Some are not necessary (eg cpufreq,
delay, rtc ...) AFAICT
> +#define DISABLE_THREMAL (BIT(31) | BIT(15))
> +#define ENABLE_THREMAL BIT(31)
> +#define SP_THREMAL_MASK GENMASK(10, 0)
THREMAL ?
s/THREMAL/THERMAL/ ?
> +#define TEMP_RATE 608
> +#define TEMP_BASE 3500
> +#define TEMP_OTP_BASE 1518
> +
> +#define SP_THERMAL_CTL0_REG 0x0000
> +#define SP_THERMAL_STS0_REG 0x0030
> +
> +/* common data structures */
> +struct sp_thermal_data {
> + struct thermal_zone_device *pcb_tz;
> + struct platform_device *pdev;
> + enum thermal_device_mode mode;
> + long sensor_temp;
> + void __iomem *regs;
> + int otp_temp0;
> + int otp_temp1;
> + u32 id;
> +};
> +
> +static char *sp7021_otp_coef_read(struct device *dev, ssize_t *len)
> +{
> + char *ret = NULL;
> + struct nvmem_cell *c = nvmem_cell_get(dev, "calib");
> +
> + if (IS_ERR_OR_NULL(c))
> + return NULL;
> +
> + ret = nvmem_cell_read(c, len);
> + nvmem_cell_put(c);
That is wrong. Please refer to the documentation driver-api/nvmem.rst
nvmem_cell_put() must be called when the pointer returned by
nvmem_cell_read() is no longer used.
> + return ret;
> +}
> +
> +static void sp7021_get_otp_temp_coef(struct sp_thermal_data *sp_data, struct device *_d)
> +{
> + ssize_t otp_l = 0;
> + char *otp_v;
> +
> + otp_v = sp7021_otp_coef_read(_d, &otp_l);
> + if (otp_l < 3)
> + return;
> + if (IS_ERR_OR_NULL(otp_v))
> + return;
> + sp_data->otp_temp0 = otp_v[0] | (otp_v[1] << 8);
What do you expect by 8bits shifting a char here ?
> + sp_data->otp_temp0 = otp_v[0] | (otp_v[1] << 8);
duplicate line
> + sp_data->otp_temp0 = FIELD_GET(SP_THREMAL_MASK, sp_data->otp_temp0);
> + sp_data->otp_temp1 = (otp_v[1] >> 3) | (otp_v[2] << 5);
> + sp_data->otp_temp1 = FIELD_GET(SP_THREMAL_MASK, sp_data->otp_temp1);
> + if (sp_data->otp_temp0 == 0)
> + sp_data->otp_temp0 = TEMP_OTP_BASE;
Can you add a comment explaining how is stored the coef in the nvcell,
so we can understand the above actions ?
> +}
> +
> +static int sp_thermal_get_sensor_temp(void *data, int *temp)
> +{
> + struct sp_thermal_data *sp_data = data;
> + int t_code;
> +
> + t_code = readl(sp_data->regs + SP_THERMAL_STS0_REG);
> + t_code = FIELD_GET(SP_THREMAL_MASK, t_code);
> + *temp = ((sp_data->otp_temp0 - t_code) * 10000 / TEMP_RATE) + TEMP_BASE;
> + *temp *= 10;
A comment would be welcome here also
> + return 0;
> +}
> +
> +static struct thermal_zone_of_device_ops sp_of_thermal_ops = {
> + .get_temp = sp_thermal_get_sensor_temp,
> +};
> +
> +static int sp_thermal_register_sensor(struct platform_device *pdev, struct sp_thermal_data *data,
> + int index)
> +{
> + int ret;
> +
> + data->id = index;
> + data->pcb_tz = devm_thermal_zone_of_sensor_register(&pdev->dev,
> + data->id, data, &sp_of_thermal_ops);
> + if (!IS_ERR_OR_NULL(data->pcb_tz))
> + return 0;
> + ret = PTR_ERR(data->pcb_tz);
> + data->pcb_tz = NULL;
> + return ret;
Usually the logic is inverted
data->pcb_tz = devm_thermal_zone_of_sensor_register();
if (IS_ERR_OR_NULL(data->pcb_tz))
return PTR_ERR(data->pcb_tz);
return 0;
No need to set pcb_tz to NULL
> +}
> +
> +static int sp7021_thermal_probe(struct platform_device *pdev)
> +{
> + struct sp_thermal_data *sp_data;
> + struct resource *res;
> + int ret;
> +
> + sp_data = devm_kzalloc(&(pdev->dev), sizeof(*sp_data), GFP_KERNEL);
> + if (!sp_data)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (IS_ERR(res))
> + return dev_err_probe(&(pdev->dev), PTR_ERR(res), "resource get fail\n");
Use an intermediate 'dev' variable to shorten the line
> + sp_data->regs = devm_ioremap(&(pdev->dev), res->start, resource_size(res));
> + if (IS_ERR(sp_data->regs))
> + return dev_err_probe(&(pdev->dev), PTR_ERR(sp_data->regs), "mas_base get fail\n");
typo: mas_base -> ioremap
> + writel(ENABLE_THREMAL, sp_data->regs + SP_THERMAL_CTL0_REG);
> +
> + platform_set_drvdata(pdev, sp_data);
> + sp7021_get_otp_temp_coef(sp_data, &pdev->dev);
> + ret = sp_thermal_register_sensor(pdev, sp_data, 0);
return sp_thermal_register_sensor(...);
> +
> + return ret;
> +}
> +
> +static int sp7021_thermal_remove(struct platform_device *_pd)
> +{
> + return 0;
> +}
> +
> +static const struct of_device_id of_sp7021_thermal_ids[] = {
> + { .compatible = "sunplus,sp7021-thermal" },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, of_sp7021_thermal_ids);
> +
> +static struct platform_driver sp7021_thermal_driver = {
> + .probe = sp7021_thermal_probe,
> + .remove = sp7021_thermal_remove,
> + .driver = {
> + .name = "sp7021-thermal",
> + .of_match_table = of_match_ptr(of_sp7021_thermal_ids),
> + },
> +};
> +module_platform_driver(sp7021_thermal_driver);
> +
> +MODULE_AUTHOR("Li-hao Kuo <[email protected]>");
> +MODULE_DESCRIPTION("Thermal driver for SP7021 SoC");
> +MODULE_LICENSE("GPL");
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
Hi Mr Daniel Lezcano:
Thank you for your review
> Please check the headers above. Some are not necessary (eg cpufreq,
> delay, rtc ...) AFAICT
>
> > +#define DISABLE_THREMAL (BIT(31) | BIT(15))
> > +#define ENABLE_THREMAL BIT(31)
> > +#define SP_THREMAL_MASK GENMASK(10, 0)
>
> THREMAL ?
>
> s/THREMAL/THERMAL/ ?
Sorry, I'll correct it in next commit.
> > +static char *sp7021_otp_coef_read(struct device *dev, ssize_t *len)
> > +{
> > + char *ret = NULL;
> > + struct nvmem_cell *c = nvmem_cell_get(dev, "calib");
> > +
> > + if (IS_ERR_OR_NULL(c))
> > + return NULL;
> > +
> > + ret = nvmem_cell_read(c, len);
> > + nvmem_cell_put(c);
>
> That is wrong. Please refer to the documentation driver-api/nvmem.rst
>
> nvmem_cell_put() must be called when the pointer returned by
> nvmem_cell_read() is no longer used.
>
Sorry for that. I don't know which part is wrong.
nvmem_cell_put() has been called after nvmem_cell_read()
I am coding according to the example.
> duplicate line
>
> > + sp_data->otp_temp0 = FIELD_GET(SP_THREMAL_MASK, sp_data->otp_temp0);
> > + sp_data->otp_temp1 = (otp_v[1] >> 3) | (otp_v[2] << 5);
> > + sp_data->otp_temp1 = FIELD_GET(SP_THREMAL_MASK, sp_data->otp_temp1);
> > + if (sp_data->otp_temp0 == 0)
> > + sp_data->otp_temp0 = TEMP_OTP_BASE;
>
> Can you add a comment explaining how is stored the coef in the nvcell,
> so we can understand the above actions ?
>
>
Is the comment below ok?
/*
*When remanufacturing, the 35 degree T_CODE will be read and stored in nvcell.
*TEMP_RATE is the SP7021 temperature slope.
*T_CODE : 11 digits in total
*/