This is the start of the stable review cycle for the 4.4.79 release.
There are 83 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Thu Jul 27 19:16:34 UTC 2017.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.79-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.4.79-rc1
Greg Hackmann <[email protected]>
alarmtimer: don't rate limit one-shot timers
Chunyu Hu <[email protected]>
tracing: Fix kmemleak in instance_rmdir
Bjorn Andersson <[email protected]>
spmi: Include OF based modalias in device uevent
Stephen Boyd <[email protected]>
of: device: Export of_device_{get_modalias, uvent_modalias} to modules
Imre Deak <[email protected]>
drm/mst: Avoid processing partially received up/down message transactions
Imre Deak <[email protected]>
drm/mst: Avoid dereferencing a NULL mstb in drm_dp_mst_handle_up_req()
Imre Deak <[email protected]>
drm/mst: Fix error handling during MST sideband message reception
Ismail, Mustafa <[email protected]>
RDMA/core: Initialize port_num in qp_attr
Yan, Zheng <[email protected]>
ceph: fix race in concurrent readdir
Michael Gugino <[email protected]>
staging: rtl8188eu: add TL-WN722N v2 support
Ingo Molnar <[email protected]>
Revert "perf/core: Drop kernel samples even though :u is specified"
Jin Yao <[email protected]>
perf annotate: Fix broken arrow at row 0 connecting jmp instruction to its target
Jiang Yi <[email protected]>
target: Fix COMPARE_AND_WRITE caw_sem leak during se_cmd quiesce
Jan Kara <[email protected]>
udf: Fix deadlock between writeback and udf_setsize()
NeilBrown <[email protected]>
NFS: only invalidate dentrys that are clearly invalid.
Chen Hong <[email protected]>
Input: i8042 - fix crash at boot time
Maciej W. Rozycki <[email protected]>
MIPS: Fix a typo: s/preset/present/ in r2-to-r6 emulation error message
Maciej W. Rozycki <[email protected]>
MIPS: Send SIGILL for linked branches in `__compute_return_epc_for_insn'
Maciej W. Rozycki <[email protected]>
MIPS: Rename `sigill_r6' to `sigill_r2r6' in `__compute_return_epc_for_insn'
Maciej W. Rozycki <[email protected]>
MIPS: Send SIGILL for BPOSGE32 in `__compute_return_epc_for_insn'
Maciej W. Rozycki <[email protected]>
MIPS: math-emu: Prevent wrong ISA mode instruction emulation
Maciej W. Rozycki <[email protected]>
MIPS: Fix unaligned PC interpretation in `compute_return_epc'
Maciej W. Rozycki <[email protected]>
MIPS: Actually decode JALX in `__compute_return_epc_for_insn'
James Hogan <[email protected]>
MIPS: Save static registers before sysmips
Maciej W. Rozycki <[email protected]>
MIPS: Fix MIPS I ISA /proc/cpuinfo reporting
Seunghun Han <[email protected]>
x86/ioapic: Pass the correct data to unmask_ioapic_irq()
Seunghun Han <[email protected]>
x86/acpi: Prevent out of bound access caused by broken ACPI tables
James Hogan <[email protected]>
MIPS: Negate error syscall return in trace
James Hogan <[email protected]>
MIPS: Fix mips_atomic_set() with EVA
James Hogan <[email protected]>
MIPS: Fix mips_atomic_set() retry condition
Dan Carpenter <[email protected]>
ftrace: Fix uninitialized variable in match_records()
Alex Williamson <[email protected]>
vfio: New external user group/file match
Alex Williamson <[email protected]>
vfio: Fix group release deadlock
Jaegeuk Kim <[email protected]>
f2fs: Don't clear SGID when inheriting ACLs
Corey Minyard <[email protected]>
ipmi:ssif: Add missing unlock in error branch
Tony Camuso <[email protected]>
ipmi: use rcu lock around call to intf->handlers->sender()
Mario Kleiner <[email protected]>
drm/radeon: Fix eDP for single-display iMac10,1 (v2)
Alex Deucher <[email protected]>
drm/radeon/ci: disable mclk switching for high refresh rates (v2)
Tom St Denis <[email protected]>
drm/amd/amdgpu: Return error if initiating read out of range on vram
Jiri Olsa <[email protected]>
s390/syscalls: Fix out of bounds arguments access
Xiao Ni <[email protected]>
Raid5 should update rdev->sectors after reshape
Devin Heitmueller <[email protected]>
cx88: Fix regression in initial video standard setting
Marek Marczykowski-Górecki <[email protected]>
x86/xen: allow userspace access during hypercalls
Mikulas Patocka <[email protected]>
md: don't use flush_signals in userspace processes
Yoshihiro Shimoda <[email protected]>
usb: renesas_usbhs: gadget: disable all eps when the driver stops
Yoshihiro Shimoda <[email protected]>
usb: renesas_usbhs: fix usbhsc_resume() for !USBHSF_RUNTIME_PWCTRL
Johan Hovold <[email protected]>
USB: cdc-acm: add device-id for quirky printer
Colin Ian King <[email protected]>
usb: storage: return on error to avoid a null pointer dereference
Mathias Nyman <[email protected]>
xhci: Fix NULL pointer dereference when cleaning up streams for removed host
Mathias Nyman <[email protected]>
xhci: fix 20000ms port resume timeout
Julian Anastasov <[email protected]>
ipvs: SNAT packet replies only for NATed connections
Chen Yu <[email protected]>
PCI/PM: Restore the status of PCI devices across hibernation
Herbert Xu <[email protected]>
af_key: Fix sadb_x_ipsecrequest parsing
Oliver O'Halloran <[email protected]>
powerpc/asm: Mark cr0 as clobbered in mftb()
Anton Blanchard <[email protected]>
powerpc: Fix emulation of mfocrf in emulate_step()
Anton Blanchard <[email protected]>
powerpc: Fix emulation of mcrf in emulate_step()
Michael Ellerman <[email protected]>
powerpc/64: Fix atomic64_inc_not_zero() to return an int
Nicholas Bellinger <[email protected]>
iscsi-target: Add login_keys_workaround attribute for non RFC initiators
Maurizio Lombardi <[email protected]>
scsi: ses: do not add a device to an enclosure if enclosure_add_links() fails.
Krzysztof Kozlowski <[email protected]>
PM / Domains: Fix unsafe iteration over modified list of domain providers
Krzysztof Kozlowski <[email protected]>
PM / Domains: Fix unsafe iteration over modified list of device links
Satish Babu Patakokila <[email protected]>
ASoC: compress: Derive substream from stream based on direction
Arnd Bergmann <[email protected]>
wlcore: fix 64K page support
Jason A. Donenfeld <[email protected]>
Bluetooth: use constant time memory comparison for secret values
Adrian Hunter <[email protected]>
perf intel-pt: Clear FUP flag on error
Adrian Hunter <[email protected]>
perf intel-pt: Ensure IP is zero when state is INTEL_PT_STATE_NO_IP
Adrian Hunter <[email protected]>
perf intel-pt: Fix missing stack clear
Adrian Hunter <[email protected]>
perf intel-pt: Improve sample timestamp
Adrian Hunter <[email protected]>
perf intel-pt: Move decoder error setting into one condition
Mateusz Jurczyk <[email protected]>
NFC: Add sockaddr length checks before accessing sa_family in bind handlers
Mateusz Jurczyk <[email protected]>
nfc: Fix the sockaddr length sanitization in llcp_sock_connect
Mateusz Jurczyk <[email protected]>
nfc: Ensure presence of required attributes in the activate_target handler
Johan Hovold <[email protected]>
NFC: nfcmrvl: fix firmware-management initialisation
Johan Hovold <[email protected]>
NFC: nfcmrvl: use nfc-device for firmware download
Johan Hovold <[email protected]>
NFC: nfcmrvl: do not use device-managed resources
Johan Hovold <[email protected]>
NFC: nfcmrvl_uart: add missing tty-device sanity check
Johan Hovold <[email protected]>
NFC: fix broken device allocation
Miaoqing Pan <[email protected]>
ath9k: fix tx99 bus error
Miaoqing Pan <[email protected]>
ath9k: fix tx99 use after free
Viresh Kumar <[email protected]>
thermal: cpu_cooling: Avoid accessing potentially freed structures
Mauro Carvalho Chehab <[email protected]>
s5p-jpeg: don't return a random width/height
Arnd Bergmann <[email protected]>
ir-core: fix gcc-7 warning on bool arithmetic
Linus Torvalds <[email protected]>
disable new gcc-7.1.1 warnings for now
-------------
Diffstat:
Makefile | 7 +++-
arch/mips/include/asm/branch.h | 5 +--
arch/mips/kernel/branch.c | 38 ++++++++---------
arch/mips/kernel/proc.c | 2 +-
arch/mips/kernel/ptrace.c | 2 +-
arch/mips/kernel/scall32-o32.S | 2 +-
arch/mips/kernel/scall64-64.S | 2 +-
arch/mips/kernel/scall64-n32.S | 2 +-
arch/mips/kernel/scall64-o32.S | 2 +-
arch/mips/kernel/syscall.c | 15 +++++--
arch/mips/math-emu/cp1emu.c | 38 +++++++++++++++++
arch/powerpc/include/asm/atomic.h | 4 +-
arch/powerpc/include/asm/reg.h | 2 +-
arch/powerpc/lib/sstep.c | 19 ++++++++-
arch/s390/include/asm/syscall.h | 6 +++
arch/x86/include/asm/xen/hypercall.h | 3 ++
arch/x86/kernel/acpi/boot.c | 8 ++++
arch/x86/kernel/apic/io_apic.c | 2 +-
drivers/base/power/domain.c | 8 ++--
drivers/char/ipmi/ipmi_msghandler.c | 5 +++
drivers/char/ipmi/ipmi_ssif.c | 5 +++
drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 3 ++
drivers/gpu/drm/drm_dp_mst_topology.c | 41 ++++++++++++++----
drivers/gpu/drm/radeon/atombios_encoders.c | 13 +++++-
drivers/gpu/drm/radeon/ci_dpm.c | 6 +++
drivers/infiniband/core/cma.c | 2 +
drivers/input/serio/i8042.c | 12 ++++--
drivers/md/raid1.c | 5 ++-
drivers/md/raid5.c | 9 ++--
drivers/media/pci/cx88/cx88-cards.c | 9 +++-
drivers/media/pci/cx88/cx88-video.c | 2 +-
drivers/media/platform/s5p-jpeg/jpeg-core.c | 8 ++--
drivers/media/rc/imon.c | 2 +-
drivers/misc/enclosure.c | 14 +++++--
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 -
drivers/net/wireless/ath/ath9k/tx99.c | 13 ++++--
drivers/net/wireless/ti/wlcore/spi.c | 2 +-
drivers/nfc/nfcmrvl/fw_dnld.c | 7 +++-
drivers/nfc/nfcmrvl/main.c | 35 +++++++++-------
drivers/nfc/nfcmrvl/uart.c | 8 ++--
drivers/of/device.c | 2 +
drivers/pci/pci-driver.c | 1 +
drivers/spmi/spmi.c | 12 ++++++
drivers/staging/rtl8188eu/os_dep/usb_intf.c | 1 +
drivers/target/iscsi/iscsi_target_configfs.c | 2 +
drivers/target/iscsi/iscsi_target_nego.c | 6 ++-
drivers/target/iscsi/iscsi_target_parameters.c | 41 ++++++++++++------
drivers/target/iscsi/iscsi_target_parameters.h | 2 +-
drivers/target/iscsi/iscsi_target_tpg.c | 19 +++++++++
drivers/target/iscsi/iscsi_target_tpg.h | 1 +
drivers/target/target_core_transport.c | 9 ++++
drivers/thermal/cpu_cooling.c | 4 +-
drivers/usb/class/cdc-acm.c | 3 ++
drivers/usb/host/xhci-hub.c | 3 ++
drivers/usb/host/xhci-ring.c | 11 +++--
drivers/usb/renesas_usbhs/common.c | 4 +-
drivers/usb/renesas_usbhs/mod_gadget.c | 31 ++++++++++----
drivers/usb/storage/isd200.c | 5 ++-
drivers/vfio/vfio.c | 46 +++++++++++++++++++-
fs/ceph/dir.c | 5 +++
fs/f2fs/acl.c | 2 +-
fs/nfs/dir.c | 12 ++++--
fs/nfs/inode.c | 4 +-
fs/udf/inode.c | 4 +-
include/linux/vfio.h | 2 +
include/target/iscsi/iscsi_target_core.h | 9 ++++
kernel/events/core.c | 21 ----------
kernel/time/alarmtimer.c | 3 +-
kernel/trace/ftrace.c | 2 +-
kernel/trace/trace.c | 1 +
net/bluetooth/smp.c | 35 ++++++++--------
net/key/af_key.c | 47 +++++++++++----------
net/netfilter/ipvs/ip_vs_core.c | 19 ++++++---
net/nfc/core.c | 31 ++++++++------
net/nfc/llcp_sock.c | 9 ++--
net/nfc/nci/core.c | 3 +-
net/nfc/netlink.c | 4 +-
sound/soc/soc-compress.c | 6 ++-
tools/perf/ui/browser.c | 2 +-
.../perf/util/intel-pt-decoder/intel-pt-decoder.c | 49 ++++++++++++++++++----
virt/kvm/vfio.c | 27 ++++++++----
81 files changed, 624 insertions(+), 246 deletions(-)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mateusz Jurczyk <[email protected]>
commit a0323b979f81ad2deb2c8836eab506534891876a upstream.
Check that the NFC_ATTR_TARGET_INDEX and NFC_ATTR_PROTOCOLS attributes (in
addition to NFC_ATTR_DEVICE_INDEX) are provided by the netlink client
prior to accessing them. This prevents potential unhandled NULL pointer
dereference exceptions which can be triggered by malicious user-mode
programs, if they omit one or both of these attributes.
Signed-off-by: Mateusz Jurczyk <[email protected]>
Acked-by: Kees Cook <[email protected]>
Signed-off-by: Samuel Ortiz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/nfc/netlink.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/net/nfc/netlink.c
+++ b/net/nfc/netlink.c
@@ -873,7 +873,9 @@ static int nfc_genl_activate_target(stru
u32 device_idx, target_idx, protocol;
int rc;
- if (!info->attrs[NFC_ATTR_DEVICE_INDEX])
+ if (!info->attrs[NFC_ATTR_DEVICE_INDEX] ||
+ !info->attrs[NFC_ATTR_TARGET_INDEX] ||
+ !info->attrs[NFC_ATTR_PROTOCOLS])
return -EINVAL;
device_idx = nla_get_u32(info->attrs[NFC_ATTR_DEVICE_INDEX]);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adrian Hunter <[email protected]>
commit 6a558f12dbe85437acbdec5e149ea07b5554eced upstream.
Sometimes a FUP packet is associated with a TSX transaction and a flag is
set to indicate that. Ensure that flag is cleared on any error condition
because at that point the decoder can no longer assume it is correct.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/intel-pt-decoder/intel-pt-decoder.c | 2 ++
1 file changed, 2 insertions(+)
--- a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
+++ b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
@@ -1924,6 +1924,8 @@ static int intel_pt_sync_ip(struct intel
{
int err;
+ decoder->set_fup_tx_flags = false;
+
intel_pt_log("Scanning for full IP\n");
err = intel_pt_walk_to_ip(decoder);
if (err)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mathias Nyman <[email protected]>
commit 4b895868bb2da60a386a17cde3bf9ecbc70c79f4 upstream.
This off by one in stream_id indexing caused NULL pointer dereference and
soft lockup on machines with USB attached SCSI devices connected to a
hotpluggable xhci controller.
The code that cleans up pending URBs for dead hosts tried to dereference
a stream ring at the invalid stream_id 0.
ep->stream_info->stream_rings[0] doesn't point to a ring.
Start looping stream_id from 1 like in all the other places in the driver,
and check that the ring exists before trying to kill URBs on it.
Reported-by: rocko r <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-ring.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -856,13 +856,16 @@ static void xhci_kill_endpoint_urbs(stru
(ep->ep_state & EP_GETTING_NO_STREAMS)) {
int stream_id;
- for (stream_id = 0; stream_id < ep->stream_info->num_streams;
+ for (stream_id = 1; stream_id < ep->stream_info->num_streams;
stream_id++) {
+ ring = ep->stream_info->stream_rings[stream_id];
+ if (!ring)
+ continue;
+
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Killing URBs for slot ID %u, ep index %u, stream %u",
- slot_id, ep_index, stream_id + 1);
- xhci_kill_ring_urbs(xhci,
- ep->stream_info->stream_rings[stream_id]);
+ slot_id, ep_index, stream_id);
+ xhci_kill_ring_urbs(xhci, ring);
}
} else {
ring = ep->ring;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krzysztof Kozlowski <[email protected]>
commit c6e83cac3eda5f7dd32ee1453df2f7abb5c6cd46 upstream.
pm_genpd_remove_subdomain() iterates over domain's master_links list and
removes matching element thus it has to use safe version of list
iteration.
Fixes: f721889ff65a ("PM / Domains: Support for generic I/O PM domains (v8)")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/base/power/domain.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -1373,7 +1373,7 @@ EXPORT_SYMBOL_GPL(pm_genpd_add_subdomain
int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd,
struct generic_pm_domain *subdomain)
{
- struct gpd_link *link;
+ struct gpd_link *l, *link;
int ret = -EINVAL;
if (IS_ERR_OR_NULL(genpd) || IS_ERR_OR_NULL(subdomain))
@@ -1388,7 +1388,7 @@ int pm_genpd_remove_subdomain(struct gen
goto out;
}
- list_for_each_entry(link, &genpd->master_links, master_node) {
+ list_for_each_entry_safe(link, l, &genpd->master_links, master_node) {
if (link->slave != subdomain)
continue;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Hogan <[email protected]>
commit 2ec420b26f7b6ff332393f0bb5a7d245f7ad87f0 upstream.
The inline asm retry check in the MIPS_ATOMIC_SET operation of the
sysmips system call has been backwards since commit f1e39a4a616c ("MIPS:
Rewrite sysmips(MIPS_ATOMIC_SET, ...) in C with inline assembler")
merged in v2.6.32, resulting in the non R10000_LLSC_WAR case retrying
until the operation was inatomic, before returning the new value that
was probably just written multiple times instead of the old value.
Invert the branch condition to fix that particular issue.
Fixes: f1e39a4a616c ("MIPS: Rewrite sysmips(MIPS_ATOMIC_SET, ...) in C with inline assembler")
Signed-off-by: James Hogan <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/16148/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/kernel/syscall.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -141,7 +141,7 @@ static inline int mips_atomic_set(unsign
"1: ll %[old], (%[addr]) \n"
" move %[tmp], %[new] \n"
"2: sc %[tmp], (%[addr]) \n"
- " bnez %[tmp], 4f \n"
+ " beqz %[tmp], 4f \n"
"3: \n"
" .insn \n"
" .subsection 2 \n"
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Seunghun Han <[email protected]>
commit dad5ab0db8deac535d03e3fe3d8f2892173fa6a4 upstream.
The bus_irq argument of mp_override_legacy_irq() is used as the index into
the isa_irq_to_gsi[] array. The bus_irq argument originates from
ACPI_MADT_TYPE_IO_APIC and ACPI_MADT_TYPE_INTERRUPT items in the ACPI
tables, but is nowhere sanity checked.
That allows broken or malicious ACPI tables to overwrite memory, which
might cause malfunction, panic or arbitrary code execution.
Add a sanity check and emit a warning when that triggers.
[ tglx: Added warning and rewrote changelog ]
Signed-off-by: Seunghun Han <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: "Rafael J. Wysocki" <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/acpi/boot.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -329,6 +329,14 @@ static void __init mp_override_legacy_ir
struct mpc_intsrc mp_irq;
/*
+ * Check bus_irq boundary.
+ */
+ if (bus_irq >= NR_IRQS_LEGACY) {
+ pr_warn("Invalid bus_irq %u for legacy override\n", bus_irq);
+ return;
+ }
+
+ /*
* Convert 'gsi' to 'ioapic.pin'.
*/
ioapic = mp_find_ioapic(gsi);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ismail, Mustafa <[email protected]>
commit a62ab66b13a0f9bcb17b7b761f6670941ed5cd62 upstream.
Initialize the port_num for iWARP in rdma_init_qp_attr.
Fixes: 5ecce4c9b17b("Check port number supplied by user verbs cmds")
Reviewed-by: Steve Wise <[email protected]>
Signed-off-by: Mustafa Ismail <[email protected]>
Tested-by: Mike Marciniszyn <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/core/cma.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -857,6 +857,8 @@ int rdma_init_qp_attr(struct rdma_cm_id
} else
ret = iw_cm_init_qp_attr(id_priv->cm_id.iw, qp_attr,
qp_attr_mask);
+ qp_attr->port_num = id_priv->id.port_num;
+ *qp_attr_mask |= IB_QP_PORT;
} else
ret = -ENOSYS;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Imre Deak <[email protected]>
commit 636c4c3e762b62aa93632c645ca65879285b16e3 upstream.
Currently we may process up/down message transactions containing
uninitialized data. This can happen if there was an error during the
reception of any message in the transaction, but we happened to receive
the last message correctly with the end-of-message flag set.
To avoid this abort the reception of the transaction when the first
error is detected, rejecting any messages until a message with the
start-of-message flag is received (which will start a new transaction).
This is also what the DP 1.4 spec 2.11.8.2 calls for in this case.
In addtion this also prevents receiving bogus transactions without the
first message with the the start-of-message flag set.
v2:
- unchanged
v3:
- git add the part that actually skips messages after an error in
drm_dp_sideband_msg_build()
Cc: Dave Airlie <[email protected]>
Cc: Lyude <[email protected]>
Cc: Daniel Vetter <[email protected]>
Signed-off-by: Imre Deak <[email protected]>
Reviewed-by: Lyude <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/drm_dp_mst_topology.c | 31 ++++++++++++++++++++++++-------
1 file changed, 24 insertions(+), 7 deletions(-)
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -330,6 +330,13 @@ static bool drm_dp_sideband_msg_build(st
return false;
}
+ /*
+ * ignore out-of-order messages or messages that are part of a
+ * failed transaction
+ */
+ if (!recv_hdr.somt && !msg->have_somt)
+ return false;
+
/* get length contained in this portion */
msg->curchunk_len = recv_hdr.msg_len;
msg->curchunk_hdrlen = hdrlen;
@@ -2163,7 +2170,7 @@ out_unlock:
}
EXPORT_SYMBOL(drm_dp_mst_topology_mgr_resume);
-static void drm_dp_get_one_sb_msg(struct drm_dp_mst_topology_mgr *mgr, bool up)
+static bool drm_dp_get_one_sb_msg(struct drm_dp_mst_topology_mgr *mgr, bool up)
{
int len;
u8 replyblock[32];
@@ -2178,12 +2185,12 @@ static void drm_dp_get_one_sb_msg(struct
replyblock, len);
if (ret != len) {
DRM_DEBUG_KMS("failed to read DPCD down rep %d %d\n", len, ret);
- return;
+ return false;
}
ret = drm_dp_sideband_msg_build(msg, replyblock, len, true);
if (!ret) {
DRM_DEBUG_KMS("sideband msg build failed %d\n", replyblock[0]);
- return;
+ return false;
}
replylen = msg->curchunk_len + msg->curchunk_hdrlen;
@@ -2197,25 +2204,30 @@ static void drm_dp_get_one_sb_msg(struct
if (ret != len) {
DRM_DEBUG_KMS("failed to read a chunk (len %d, ret %d)\n",
len, ret);
- return;
+ return false;
}
ret = drm_dp_sideband_msg_build(msg, replyblock, len, false);
if (!ret) {
DRM_DEBUG_KMS("failed to build sideband msg\n");
- return;
+ return false;
}
curreply += len;
replylen -= len;
}
+ return true;
}
static int drm_dp_mst_handle_down_rep(struct drm_dp_mst_topology_mgr *mgr)
{
int ret = 0;
- drm_dp_get_one_sb_msg(mgr, false);
+ if (!drm_dp_get_one_sb_msg(mgr, false)) {
+ memset(&mgr->down_rep_recv, 0,
+ sizeof(struct drm_dp_sideband_msg_rx));
+ return 0;
+ }
if (mgr->down_rep_recv.have_eomt) {
struct drm_dp_sideband_msg_tx *txmsg;
@@ -2271,7 +2283,12 @@ static int drm_dp_mst_handle_down_rep(st
static int drm_dp_mst_handle_up_req(struct drm_dp_mst_topology_mgr *mgr)
{
int ret = 0;
- drm_dp_get_one_sb_msg(mgr, true);
+
+ if (!drm_dp_get_one_sb_msg(mgr, true)) {
+ memset(&mgr->up_req_recv, 0,
+ sizeof(struct drm_dp_sideband_msg_rx));
+ return 0;
+ }
if (mgr->up_req_recv.have_eomt) {
struct drm_dp_sideband_msg_req_body msg;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Imre Deak <[email protected]>
commit 448421b5e93b9177c5698f0cf6f5e72d2995eeca upstream.
Handle any error due to partial reads, timeouts etc. to avoid parsing
uninitialized data subsequently. Also bail out if the parsing itself
fails.
Cc: Dave Airlie <[email protected]>
Cc: Lyude <[email protected]>
Cc: Daniel Vetter <[email protected]>
Signed-off-by: Imre Deak <[email protected]>
Reviewed-by: Lyude <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/drm_dp_mst_topology.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -2195,11 +2195,17 @@ static void drm_dp_get_one_sb_msg(struct
ret = drm_dp_dpcd_read(mgr->aux, basereg + curreply,
replyblock, len);
if (ret != len) {
- DRM_DEBUG_KMS("failed to read a chunk\n");
+ DRM_DEBUG_KMS("failed to read a chunk (len %d, ret %d)\n",
+ len, ret);
+ return;
}
+
ret = drm_dp_sideband_msg_build(msg, replyblock, len, false);
- if (ret == false)
+ if (!ret) {
DRM_DEBUG_KMS("failed to build sideband msg\n");
+ return;
+ }
+
curreply += len;
replylen -= len;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Williamson <[email protected]>
commit 811642d8d8a82c0cce8dc2debfdaf23c5a144839 upstream.
If vfio_iommu_group_notifier() acquires a group reference and that
reference becomes the last reference to the group, then vfio_group_put
introduces a deadlock code path where we're trying to unregister from
the iommu notifier chain from within a callout of that chain. Use a
work_struct to release this reference asynchronously.
Signed-off-by: Alex Williamson <[email protected]>
Reviewed-by: Eric Auger <[email protected]>
Tested-by: Eric Auger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/vfio/vfio.c | 37 ++++++++++++++++++++++++++++++++++++-
1 file changed, 36 insertions(+), 1 deletion(-)
--- a/drivers/vfio/vfio.c
+++ b/drivers/vfio/vfio.c
@@ -296,6 +296,34 @@ static void vfio_group_put(struct vfio_g
kref_put_mutex(&group->kref, vfio_group_release, &vfio.group_lock);
}
+struct vfio_group_put_work {
+ struct work_struct work;
+ struct vfio_group *group;
+};
+
+static void vfio_group_put_bg(struct work_struct *work)
+{
+ struct vfio_group_put_work *do_work;
+
+ do_work = container_of(work, struct vfio_group_put_work, work);
+
+ vfio_group_put(do_work->group);
+ kfree(do_work);
+}
+
+static void vfio_group_schedule_put(struct vfio_group *group)
+{
+ struct vfio_group_put_work *do_work;
+
+ do_work = kmalloc(sizeof(*do_work), GFP_KERNEL);
+ if (WARN_ON(!do_work))
+ return;
+
+ INIT_WORK(&do_work->work, vfio_group_put_bg);
+ do_work->group = group;
+ schedule_work(&do_work->work);
+}
+
/* Assume group_lock or group reference is held */
static void vfio_group_get(struct vfio_group *group)
{
@@ -620,7 +648,14 @@ static int vfio_iommu_group_notifier(str
break;
}
- vfio_group_put(group);
+ /*
+ * If we're the last reference to the group, the group will be
+ * released, which includes unregistering the iommu group notifier.
+ * We hold a read-lock on that notifier list, unregistering needs
+ * a write-lock... deadlock. Release our reference asynchronously
+ * to avoid that situation.
+ */
+ vfio_group_schedule_put(group);
return NOTIFY_OK;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Greg Hackmann <[email protected]>
Commit ff86bf0c65f1 ("alarmtimer: Rate limit periodic intervals") sets a
minimum bound on the alarm timer interval. This minimum bound shouldn't
be applied if the interval is 0. Otherwise, one-shot timers will be
converted into periodic ones.
Fixes: ff86bf0c65f1 ("alarmtimer: Rate limit periodic intervals")
Reported-by: Ben Fennema <[email protected]>
Signed-off-by: Greg Hackmann <[email protected]>
Cc: [email protected]
Cc: John Stultz <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/time/alarmtimer.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/kernel/time/alarmtimer.c
+++ b/kernel/time/alarmtimer.c
@@ -616,7 +616,8 @@ static int alarm_timer_set(struct k_itim
* Rate limit to the tick as a hot fix to prevent DOS. Will be
* mopped up later.
*/
- if (ktime_to_ns(timr->it.alarm.interval) < TICK_NSEC)
+ if (timr->it.alarm.interval.tv64 &&
+ ktime_to_ns(timr->it.alarm.interval) < TICK_NSEC)
timr->it.alarm.interval = ktime_set(0, TICK_NSEC);
exp = timespec_to_ktime(new_setting->it_value);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chunyu Hu <[email protected]>
commit db9108e054700c96322b0f0028546aa4e643cf0b upstream.
Hit the kmemleak when executing instance_rmdir, it forgot releasing
mem of tracing_cpumask. With this fix, the warn does not appear any
more.
unreferenced object 0xffff93a8dfaa7c18 (size 8):
comm "mkdir", pid 1436, jiffies 4294763622 (age 9134.308s)
hex dump (first 8 bytes):
ff ff ff ff ff ff ff ff ........
backtrace:
[<ffffffff88b6567a>] kmemleak_alloc+0x4a/0xa0
[<ffffffff8861ea41>] __kmalloc_node+0xf1/0x280
[<ffffffff88b505d3>] alloc_cpumask_var_node+0x23/0x30
[<ffffffff88b5060e>] alloc_cpumask_var+0xe/0x10
[<ffffffff88571ab0>] instance_mkdir+0x90/0x240
[<ffffffff886e5100>] tracefs_syscall_mkdir+0x40/0x70
[<ffffffff886565c9>] vfs_mkdir+0x109/0x1b0
[<ffffffff8865b1d0>] SyS_mkdir+0xd0/0x100
[<ffffffff88403857>] do_syscall_64+0x67/0x150
[<ffffffff88b710e7>] return_from_SYSCALL_64+0x0/0x6a
[<ffffffffffffffff>] 0xffffffffffffffff
Link: http://lkml.kernel.org/r/[email protected]
Fixes: ccfe9e42e451 ("tracing: Make tracing_cpumask available for all instances")
Signed-off-by: Chunyu Hu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace.c | 1 +
1 file changed, 1 insertion(+)
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -6737,6 +6737,7 @@ static int instance_rmdir(const char *na
}
kfree(tr->topts);
+ free_cpumask_var(tr->tracing_cpumask);
kfree(tr->name);
kfree(tr);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bjorn Andersson <[email protected]>
commit d50daa2af2618dab6d21634e65a5fbcf4ae437d6 upstream.
Include the OF-based modalias in the uevent sent when registering SPMI
devices, so that user space has a chance to autoload the kernel module
for the device.
Tested-by: Rob Clark <[email protected]>
Reported-by: Rob Clark <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spmi/spmi.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
--- a/drivers/spmi/spmi.c
+++ b/drivers/spmi/spmi.c
@@ -364,11 +364,23 @@ static int spmi_drv_remove(struct device
return 0;
}
+static int spmi_drv_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+ int ret;
+
+ ret = of_device_uevent_modalias(dev, env);
+ if (ret != -ENODEV)
+ return ret;
+
+ return 0;
+}
+
static struct bus_type spmi_bus_type = {
.name = "spmi",
.match = spmi_device_match,
.probe = spmi_drv_probe,
.remove = spmi_drv_remove,
+ .uevent = spmi_drv_uevent,
};
/**
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maciej W. Rozycki <[email protected]>
commit 27fe2200dad2de8207a694024a7b9037dff1b280 upstream.
This is a user-visible message, so we want it to be spelled correctly.
Fixes: 5f9f41c474be ("MIPS: kernel: Prepare the JR instruction for emulation on MIPS R6")
Signed-off-by: Maciej W. Rozycki <[email protected]>
Cc: James Hogan <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/16400/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/kernel/branch.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -845,7 +845,7 @@ sigill_dsp:
force_sig(SIGILL, current);
return -EFAULT;
sigill_r2r6:
- pr_info("%s: R2 branch but r2-to-r6 emulator is not preset - sending SIGILL.\n",
+ pr_info("%s: R2 branch but r2-to-r6 emulator is not present - sending SIGILL.\n",
current->comm);
force_sig(SIGILL, current);
return -EFAULT;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephen Boyd <[email protected]>
commit 7a3b7cd332db08546f3cdd984f11773e0d1999e7 upstream.
The ULPI bus can be built as a module, and it will soon be
calling these functions when it supports probing devices from DT.
Export them so they can be used by the ULPI module.
Acked-by: Rob Herring <[email protected]>
Cc: <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Peter Chen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/of/device.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/of/device.c
+++ b/drivers/of/device.c
@@ -225,6 +225,7 @@ ssize_t of_device_get_modalias(struct de
return tsize;
}
+EXPORT_SYMBOL_GPL(of_device_get_modalias);
/**
* of_device_uevent - Display OF related uevent information
@@ -287,3 +288,4 @@ int of_device_uevent_modalias(struct dev
return 0;
}
+EXPORT_SYMBOL_GPL(of_device_uevent_modalias);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yan, Zheng <[email protected]>
commit 84583cfb973c4313955c6231cc9cb3772d280b15 upstream.
For a large directory, program needs to issue multiple readdir
syscalls to get all dentries. When there are multiple programs
read the directory concurrently. Following sequence of events
can happen.
- program calls readdir with pos = 2. ceph sends readdir request
to mds. The reply contains N1 entries. ceph adds these N1 entries
to readdir cache.
- program calls readdir with pos = N1+2. The readdir is satisfied
by the readdir cache, N2 entries are returned. (Other program
calls readdir in the middle, which fills the cache)
- program calls readdir with pos = N1+N2+2. ceph sends readdir
request to mds. The reply contains N3 entries and it reaches
directory end. ceph adds these N3 entries to the readdir cache
and marks directory complete.
The second readdir call does not update fi->readdir_cache_idx.
ceph add the last N3 entries to wrong places.
Signed-off-by: "Yan, Zheng" <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ceph/dir.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -247,6 +247,11 @@ static int __dcache_readdir(struct file
if (ret < 0)
err = ret;
dput(last);
+ /* last_name no longer match cache index */
+ if (fi->readdir_cache_idx >= 0) {
+ fi->readdir_cache_idx = -1;
+ fi->dir_release_count = 0;
+ }
}
return err;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maciej W. Rozycki <[email protected]>
commit fef40be6da856afead4177aaa9d869a66fb3381f upstream.
Fix commit 319824eabc3f ("MIPS: kernel: branch: Do not emulate the
branch likelies on MIPS R6") and also send SIGILL rather than returning
-SIGILL for BLTZAL, BLTZALL, BGEZAL and BGEZALL instruction encodings no
longer supported in R6, except where emulated. Returning -SIGILL is
never correct as the API defines this function's result upon error to be
-EFAULT and a signal actually issued.
Fixes: 319824eabc3f ("MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6")
Signed-off-by: Maciej W. Rozycki <[email protected]>
Cc: James Hogan <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/16398/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/kernel/branch.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -473,10 +473,8 @@ int __compute_return_epc_for_insn(struct
case bltzal_op:
case bltzall_op:
if (NO_R6EMU && (insn.i_format.rs ||
- insn.i_format.rt == bltzall_op)) {
- ret = -SIGILL;
- break;
- }
+ insn.i_format.rt == bltzall_op))
+ goto sigill_r2r6;
regs->regs[31] = epc + 8;
/*
* OK we are here either because we hit a NAL
@@ -507,10 +505,8 @@ int __compute_return_epc_for_insn(struct
case bgezal_op:
case bgezall_op:
if (NO_R6EMU && (insn.i_format.rs ||
- insn.i_format.rt == bgezall_op)) {
- ret = -SIGILL;
- break;
- }
+ insn.i_format.rt == bgezall_op))
+ goto sigill_r2r6;
regs->regs[31] = epc + 8;
/*
* OK we are here either because we hit a BAL
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Gugino <[email protected]>
commit 5a1d4c5dd4eb2f1f8a9b30e61762f3b3b564df70 upstream.
Add support for USB Device TP-Link TL-WN722N v2.
VendorID: 0x2357, ProductID: 0x010c
Signed-off-by: Michael Gugino <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/rtl8188eu/os_dep/usb_intf.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/staging/rtl8188eu/os_dep/usb_intf.c
+++ b/drivers/staging/rtl8188eu/os_dep/usb_intf.c
@@ -47,6 +47,7 @@ static struct usb_device_id rtw_usb_id_t
{USB_DEVICE(0x2001, 0x330F)}, /* DLink DWA-125 REV D1 */
{USB_DEVICE(0x2001, 0x3310)}, /* Dlink DWA-123 REV D1 */
{USB_DEVICE(0x2001, 0x3311)}, /* DLink GO-USB-N150 REV B1 */
+ {USB_DEVICE(0x2357, 0x010c)}, /* TP-Link TL-WN722N v2 */
{USB_DEVICE(0x0df6, 0x0076)}, /* Sitecom N150 v2 */
{} /* Terminating entry */
};
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ingo Molnar <[email protected]>
commit 6a8a75f3235724c5941a33e287b2f98966ad14c5 upstream.
This reverts commit cc1582c231ea041fbc68861dfaf957eaf902b829.
This commit introduced a regression that broke rr-project, which uses sampling
events to receive a signal on overflow (but does not care about the contents
of the sample). These signals are critical to the correct operation of rr.
There's been some back and forth about how to fix it - but to not keep
applications in limbo queue up a revert.
Reported-by: Kyle Huey <[email protected]>
Acked-by: Kyle Huey <[email protected]>
Acked-by: Peter Zijlstra <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Vince Weaver <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: http://lkml.kernel.org/r/20170628105600.GC5981@leverpostej
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/events/core.c | 21 ---------------------
1 file changed, 21 deletions(-)
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -6410,21 +6410,6 @@ static void perf_log_itrace_start(struct
perf_output_end(&handle);
}
-static bool sample_is_allowed(struct perf_event *event, struct pt_regs *regs)
-{
- /*
- * Due to interrupt latency (AKA "skid"), we may enter the
- * kernel before taking an overflow, even if the PMU is only
- * counting user events.
- * To avoid leaking information to userspace, we must always
- * reject kernel samples when exclude_kernel is set.
- */
- if (event->attr.exclude_kernel && !user_mode(regs))
- return false;
-
- return true;
-}
-
/*
* Generic event overflow handling, sampling.
*/
@@ -6472,12 +6457,6 @@ static int __perf_event_overflow(struct
}
/*
- * For security, drop the skid kernel samples if necessary.
- */
- if (!sample_is_allowed(event, regs))
- return ret;
-
- /*
* XXX event_limit might not quite work as expected on inherited
* events
*/
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiang Yi <[email protected]>
commit 1d6ef276594a781686058802996e09c8550fd767 upstream.
This patch addresses a COMPARE_AND_WRITE se_device->caw_sem leak,
that would be triggered during normal se_cmd shutdown or abort
via __transport_wait_for_tasks().
This would occur because target_complete_cmd() would catch this
early and do complete_all(&cmd->t_transport_stop_comp), but since
target_complete_ok_work() or target_complete_failure_work() are
never called to invoke se_cmd->transport_complete_callback(),
the COMPARE_AND_WRITE specific callbacks never release caw_sem.
To address this special case, go ahead and release caw_sem
directly from target_complete_cmd().
(Remove '&& success' from check, to release caw_sem regardless
of scsi_status - nab)
Signed-off-by: Jiang Yi <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/target/target_core_transport.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -728,6 +728,15 @@ void target_complete_cmd(struct se_cmd *
if (cmd->transport_state & CMD_T_ABORTED ||
cmd->transport_state & CMD_T_STOP) {
spin_unlock_irqrestore(&cmd->t_state_lock, flags);
+ /*
+ * If COMPARE_AND_WRITE was stopped by __transport_wait_for_tasks(),
+ * release se_device->caw_sem obtained by sbc_compare_and_write()
+ * since target_complete_ok_work() or target_complete_failure_work()
+ * won't be called to invoke the normal CAW completion callbacks.
+ */
+ if (cmd->se_cmd_flags & SCF_COMPARE_AND_WRITE) {
+ up(&dev->caw_sem);
+ }
complete_all(&cmd->t_transport_stop_comp);
return;
} else if (!success) {
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
commit f2e95355891153f66d4156bf3a142c6489cd78c6 upstream.
udf_setsize() called truncate_setsize() with i_data_sem held. Thus
truncate_pagecache() called from truncate_setsize() could lock a page
under i_data_sem which can deadlock as page lock ranks below
i_data_sem - e. g. writeback can hold page lock and try to acquire
i_data_sem to map a block.
Fix the problem by moving truncate_setsize() calls from under
i_data_sem. It is safe for us to change i_size without holding
i_data_sem as all the places that depend on i_size being stable already
hold inode_lock.
Fixes: 7e49b6f2480cb9a9e7322a91592e56a5c85361f5
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/udf/inode.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -1235,8 +1235,8 @@ int udf_setsize(struct inode *inode, lof
return err;
}
set_size:
- truncate_setsize(inode, newsize);
up_write(&iinfo->i_data_sem);
+ truncate_setsize(inode, newsize);
} else {
if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB) {
down_write(&iinfo->i_data_sem);
@@ -1253,9 +1253,9 @@ set_size:
udf_get_block);
if (err)
return err;
+ truncate_setsize(inode, newsize);
down_write(&iinfo->i_data_sem);
udf_clear_extent_cache(inode);
- truncate_setsize(inode, newsize);
udf_truncate_extents(inode);
up_write(&iinfo->i_data_sem);
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
commit cc89684c9a265828ce061037f1f79f4a68ccd3f7 upstream.
Since commit bafc9b754f75 ("vfs: More precise tests in d_invalidate")
in v3.18, a return of '0' from ->d_revalidate() will cause the dentry
to be invalidated even if it has filesystems mounted on or it or on a
descendant. The mounted filesystem is unmounted.
This means we need to be careful not to return 0 unless the directory
referred to truly is invalid. So -ESTALE or -ENOENT should invalidate
the directory. Other errors such a -EPERM or -ERESTARTSYS should be
returned from ->d_revalidate() so they are propagated to the caller.
A particular problem can be demonstrated by:
1/ mount an NFS filesystem using NFSv3 on /mnt
2/ mount any other filesystem on /mnt/foo
3/ ls /mnt/foo
4/ turn off network, or otherwise make the server unable to respond
5/ ls /mnt/foo &
6/ cat /proc/$!/stack # note that nfs_lookup_revalidate is in the call stack
7/ kill -9 $! # this results in -ERESTARTSYS being returned
8/ observe that /mnt/foo has been unmounted.
This patch changes nfs_lookup_revalidate() to only treat
-ESTALE from nfs_lookup_verify_inode() and
-ESTALE or -ENOENT from ->lookup()
as indicating an invalid inode. Other errors are returned.
Also nfs_check_inode_attributes() is changed to return -ESTALE rather
than -EIO. This is consistent with the error returned in similar
circumstances from nfs_update_inode().
As this bug allows any user to unmount a filesystem mounted on an NFS
filesystem, this fix is suitable for stable kernels.
Fixes: bafc9b754f75 ("vfs: More precise tests in d_invalidate")
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/dir.c | 12 ++++++++----
fs/nfs/inode.c | 4 ++--
2 files changed, 10 insertions(+), 6 deletions(-)
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1135,11 +1135,13 @@ static int nfs_lookup_revalidate(struct
/* Force a full look up iff the parent directory has changed */
if (!nfs_is_exclusive_create(dir, flags) &&
nfs_check_verifier(dir, dentry, flags & LOOKUP_RCU)) {
-
- if (nfs_lookup_verify_inode(inode, flags)) {
+ error = nfs_lookup_verify_inode(inode, flags);
+ if (error) {
if (flags & LOOKUP_RCU)
return -ECHILD;
- goto out_zap_parent;
+ if (error == -ESTALE)
+ goto out_zap_parent;
+ goto out_error;
}
goto out_valid;
}
@@ -1163,8 +1165,10 @@ static int nfs_lookup_revalidate(struct
trace_nfs_lookup_revalidate_enter(dir, dentry, flags);
error = NFS_PROTO(dir)->lookup(dir, &dentry->d_name, fhandle, fattr, label);
trace_nfs_lookup_revalidate_exit(dir, dentry, flags, error);
- if (error)
+ if (error == -ESTALE || error == -ENOENT)
goto out_bad;
+ if (error)
+ goto out_error;
if (nfs_compare_fh(NFS_FH(inode), fhandle))
goto out_bad;
if ((error = nfs_refresh_inode(inode, fattr)) != 0)
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -1241,9 +1241,9 @@ static int nfs_check_inode_attributes(st
return 0;
/* Has the inode gone and changed behind our back? */
if ((fattr->valid & NFS_ATTR_FATTR_FILEID) && nfsi->fileid != fattr->fileid)
- return -EIO;
+ return -ESTALE;
if ((fattr->valid & NFS_ATTR_FATTR_TYPE) && (inode->i_mode & S_IFMT) != (fattr->mode & S_IFMT))
- return -EIO;
+ return -ESTALE;
if ((fattr->valid & NFS_ATTR_FATTR_CHANGE) != 0 &&
inode->i_version != fattr->change_attr)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Imre Deak <[email protected]>
commit 7f8b3987da54cb4d41ad2545cd4d7958b9a36bdf upstream.
In case of an unknown broadcast message is sent mstb will remain unset,
so check for this.
Cc: Dave Airlie <[email protected]>
Cc: Lyude <[email protected]>
Cc: Daniel Vetter <[email protected]>
Signed-off-by: Imre Deak <[email protected]>
Reviewed-by: Lyude <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/drm_dp_mst_topology.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -2323,7 +2323,9 @@ static int drm_dp_mst_handle_up_req(stru
DRM_DEBUG_KMS("Got RSN: pn: %d avail_pbn %d\n", msg.u.resource_stat.port_number, msg.u.resource_stat.available_pbn);
}
- drm_dp_put_mst_branch_device(mstb);
+ if (mstb)
+ drm_dp_put_mst_branch_device(mstb);
+
memset(&mgr->up_req_recv, 0, sizeof(struct drm_dp_sideband_msg_rx));
}
return ret;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chen Hong <[email protected]>
commit 340d394a789518018f834ff70f7534fc463d3226 upstream.
The driver checks port->exists twice in i8042_interrupt(), first when
trying to assign temporary "serio" variable, and second time when deciding
whether it should call serio_interrupt(). The value of port->exists may
change between the 2 checks, and we may end up calling serio_interrupt()
with a NULL pointer:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000050
IP: [<ffffffff8150feaf>] _spin_lock_irqsave+0x1f/0x40
PGD 0
Oops: 0002 [#1] SMP
last sysfs file:
CPU 0
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.32-358.el6.x86_64 #1 QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:[<ffffffff8150feaf>] [<ffffffff8150feaf>] _spin_lock_irqsave+0x1f/0x40
RSP: 0018:ffff880028203cc0 EFLAGS: 00010082
RAX: 0000000000010000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000282 RSI: 0000000000000098 RDI: 0000000000000050
RBP: ffff880028203cc0 R08: ffff88013e79c000 R09: ffff880028203ee0
R10: 0000000000000298 R11: 0000000000000282 R12: 0000000000000050
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000098
FS: 0000000000000000(0000) GS:ffff880028200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000050 CR3: 0000000001a85000 CR4: 00000000001407f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 1, threadinfo ffff88013e79c000, task ffff88013e79b500)
Stack:
ffff880028203d00 ffffffff813de186 ffffffffffffff02 0000000000000000
<d> 0000000000000000 0000000000000000 0000000000000000 0000000000000098
<d> ffff880028203d70 ffffffff813e0162 ffff880028203d20 ffffffff8103b8ac
Call Trace:
<IRQ>
[<ffffffff813de186>] serio_interrupt+0x36/0xa0
[<ffffffff813e0162>] i8042_interrupt+0x132/0x3a0
[<ffffffff8103b8ac>] ? kvm_clock_read+0x1c/0x20
[<ffffffff8103b8b9>] ? kvm_clock_get_cycles+0x9/0x10
[<ffffffff810e1640>] handle_IRQ_event+0x60/0x170
[<ffffffff8103b154>] ? kvm_guest_apic_eoi_write+0x44/0x50
[<ffffffff810e3d8e>] handle_edge_irq+0xde/0x180
[<ffffffff8100de89>] handle_irq+0x49/0xa0
[<ffffffff81516c8c>] do_IRQ+0x6c/0xf0
[<ffffffff8100b9d3>] ret_from_intr+0x0/0x11
[<ffffffff81076f63>] ? __do_softirq+0x73/0x1e0
[<ffffffff8109b75b>] ? hrtimer_interrupt+0x14b/0x260
[<ffffffff8100c1cc>] ? call_softirq+0x1c/0x30
[<ffffffff8100de05>] ? do_softirq+0x65/0xa0
[<ffffffff81076d95>] ? irq_exit+0x85/0x90
[<ffffffff81516d80>] ? smp_apic_timer_interrupt+0x70/0x9b
[<ffffffff8100bb93>] ? apic_timer_interrupt+0x13/0x20
To avoid the issue let's change the second check to test whether serio is
NULL or not.
Also, let's take i8042_lock in i8042_start() and i8042_stop() instead of
trying to be overly smart and using memory barriers.
Signed-off-by: Chen Hong <[email protected]>
[dtor: take lock in i8042_start()/i8042_stop()]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/serio/i8042.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -434,8 +434,10 @@ static int i8042_start(struct serio *ser
{
struct i8042_port *port = serio->port_data;
+ spin_lock_irq(&i8042_lock);
port->exists = true;
- mb();
+ spin_unlock_irq(&i8042_lock);
+
return 0;
}
@@ -448,16 +450,20 @@ static void i8042_stop(struct serio *ser
{
struct i8042_port *port = serio->port_data;
+ spin_lock_irq(&i8042_lock);
port->exists = false;
+ port->serio = NULL;
+ spin_unlock_irq(&i8042_lock);
/*
+ * We need to make sure that interrupt handler finishes using
+ * our serio port before we return from this function.
* We synchronize with both AUX and KBD IRQs because there is
* a (very unlikely) chance that AUX IRQ is raised for KBD port
* and vice versa.
*/
synchronize_irq(I8042_AUX_IRQ);
synchronize_irq(I8042_KBD_IRQ);
- port->serio = NULL;
}
/*
@@ -574,7 +580,7 @@ static irqreturn_t i8042_interrupt(int i
spin_unlock_irqrestore(&i8042_lock, flags);
- if (likely(port->exists && !filtered))
+ if (likely(serio && !filtered))
serio_interrupt(serio, data, dfl);
out:
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Hogan <[email protected]>
commit 49955d84cd9ccdca5a16a495e448e1a06fad9e49 upstream.
The MIPS sysmips system call handler may return directly from the
MIPS_ATOMIC_SET case (mips_atomic_set()) to syscall_exit. This path
restores the static (callee saved) registers, however they won't have
been saved on entry to the system call.
Use the save_static_function() macro to create a __sys_sysmips wrapper
function which saves the static registers before calling sys_sysmips, so
that the correct static register state is restored by syscall_exit.
Fixes: f1e39a4a616c ("MIPS: Rewrite sysmips(MIPS_ATOMIC_SET, ...) in C with inline assembler")
Signed-off-by: James Hogan <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/16149/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/kernel/scall32-o32.S | 2 +-
arch/mips/kernel/scall64-64.S | 2 +-
arch/mips/kernel/scall64-n32.S | 2 +-
arch/mips/kernel/scall64-o32.S | 2 +-
arch/mips/kernel/syscall.c | 6 ++++++
5 files changed, 10 insertions(+), 4 deletions(-)
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -372,7 +372,7 @@ EXPORT(sys_call_table)
PTR sys_writev
PTR sys_cacheflush
PTR sys_cachectl
- PTR sys_sysmips
+ PTR __sys_sysmips
PTR sys_ni_syscall /* 4150 */
PTR sys_getsid
PTR sys_fdatasync
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -312,7 +312,7 @@ EXPORT(sys_call_table)
PTR sys_sched_getaffinity
PTR sys_cacheflush
PTR sys_cachectl
- PTR sys_sysmips
+ PTR __sys_sysmips
PTR sys_io_setup /* 5200 */
PTR sys_io_destroy
PTR sys_io_getevents
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -298,7 +298,7 @@ EXPORT(sysn32_call_table)
PTR compat_sys_sched_getaffinity
PTR sys_cacheflush
PTR sys_cachectl
- PTR sys_sysmips
+ PTR __sys_sysmips
PTR compat_sys_io_setup /* 6200 */
PTR sys_io_destroy
PTR compat_sys_io_getevents
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -367,7 +367,7 @@ EXPORT(sys32_call_table)
PTR compat_sys_writev
PTR sys_cacheflush
PTR sys_cachectl
- PTR sys_sysmips
+ PTR __sys_sysmips
PTR sys_ni_syscall /* 4150 */
PTR sys_getsid
PTR sys_fdatasync
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -202,6 +202,12 @@ static inline int mips_atomic_set(unsign
unreachable();
}
+/*
+ * mips_atomic_set() normally returns directly via syscall_exit potentially
+ * clobbering static registers, so be sure to preserve them.
+ */
+save_static_function(sys_sysmips);
+
SYSCALL_DEFINE3(sysmips, long, cmd, long, arg1, long, arg2)
{
switch (cmd) {
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maciej W. Rozycki <[email protected]>
commit e5f5a5b06e51a36f6ddf31a4a485358263953a3d upstream.
Correct a commit 515a6393dbac ("MIPS: kernel: proc: Add MIPS R6 support
to /proc/cpuinfo") regression that caused MIPS I systems to show no ISA
levels supported in /proc/cpuinfo, e.g.:
system type : Digital DECstation 2100/3100
machine : Unknown
processor : 0
cpu model : R3000 V2.0 FPU V2.0
BogoMIPS : 10.69
wait instruction : no
microsecond timers : no
tlb_entries : 64
extra interrupt vector : no
hardware watchpoint : no
isa :
ASEs implemented :
shadow register sets : 1
kscratch registers : 0
package : 0
core : 0
VCED exceptions : not available
VCEI exceptions : not available
and similarly exclude `mips1' from the ISA list for any processors below
MIPSr1. This is because the condition to show `mips1' on has been made
`cpu_has_mips_r1' rather than newly-introduced `cpu_has_mips_1'. Use
the correct condition then.
Fixes: 515a6393dbac ("MIPS: kernel: proc: Add MIPS R6 support to /proc/cpuinfo")
Signed-off-by: Maciej W. Rozycki <[email protected]>
Reviewed-by: James Hogan <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/16758/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/kernel/proc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -83,7 +83,7 @@ static int show_cpuinfo(struct seq_file
}
seq_printf(m, "isa\t\t\t:");
- if (cpu_has_mips_r1)
+ if (cpu_has_mips_1)
seq_printf(m, " mips1");
if (cpu_has_mips_2)
seq_printf(m, "%s", " mips2");
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Hogan <[email protected]>
commit 4f32a39d49b25eaa66d2420f1f03d371ea4cd906 upstream.
The sys_exit trace event takes a single return value for the system
call, which MIPS passes the value of the $v0 (result) register, however
MIPS returns positive error codes in $v0 with $a3 specifying that $v0
contains an error code. As a result erroring system calls are traced
returning positive error numbers that can't always be distinguished from
success.
Use regs_return_value() to negate the error code if $a3 is set.
Fixes: 1d7bf993e073 ("MIPS: ftrace: Add support for syscall tracepoints.")
Signed-off-by: James Hogan <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/16651/
Acked-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/kernel/ptrace.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -927,7 +927,7 @@ asmlinkage void syscall_trace_leave(stru
audit_syscall_exit(regs);
if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
- trace_sys_exit(regs, regs->regs[2]);
+ trace_sys_exit(regs, regs_return_value(regs));
if (test_thread_flag(TIF_SYSCALL_TRACE))
tracehook_report_syscall_exit(regs, 0);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Seunghun Han <[email protected]>
commit e708e35ba6d89ff785b225cd07dcccab04fa954a upstream.
One of the rarely executed code pathes in check_timer() calls
unmask_ioapic_irq() passing irq_get_chip_data(0) as argument.
That's wrong as unmask_ioapic_irq() expects a pointer to the irq data of
interrupt 0. irq_get_chip_data(0) returns NULL, so the following
dereference in unmask_ioapic_irq() causes a kernel panic.
The issue went unnoticed in the first place because irq_get_chip_data()
returns a void pointer so the compiler cannot do a type check on the
argument. The code path was added for machines with broken configuration,
but it seems that those machines are either not running current kernels or
simply do not longer exist.
Hand in irq_get_irq_data(0) as argument which provides the correct data.
[ tglx: Rewrote changelog ]
Fixes: 4467715a44cc ("x86/irq: Move irq_cfg.irq_2_pin into io_apic.c")
Signed-off-by: Seunghun Han <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/apic/io_apic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -2115,7 +2115,7 @@ static inline void __init check_timer(vo
int idx;
idx = find_irq_entry(apic1, pin1, mp_INT);
if (idx != -1 && irq_trigger(idx))
- unmask_ioapic_irq(irq_get_chip_data(0));
+ unmask_ioapic_irq(irq_get_irq_data(0));
}
irq_domain_deactivate_irq(irq_data);
irq_domain_activate_irq(irq_data);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maciej W. Rozycki <[email protected]>
commit 13769ebad0c42738831787e27c7c7f982e7da579 upstream.
Terminate FPU emulation immediately whenever an ISA mode switch has been
observed. This is so that we do not interpret machine code in the wrong
mode, for example when a regular MIPS FPU instruction has been placed in
a delay slot of a jump that switches into the MIPS16 mode, as with the
following code (taken from a GCC test suite case):
00400650 <set_fast_math>:
400650: 3c020100 lui v0,0x100
400654: 03e00008 jr ra
400658: 44c2f800 ctc1 v0,c1_fcsr
40065c: 00000000 nop
[...]
004012d0 <__libc_csu_init>:
4012d0: f000 6a02 li v0,2
4012d4: f150 0b1c la v1,3f9430 <_DYNAMIC-0x6df0>
4012d8: f400 3240 sll v0,16
4012dc: e269 addu v0,v1
4012de: 659a move gp,v0
4012e0: f00c 64f6 save a0-a2,48,ra,s0-s1
4012e4: 673c move s1,gp
4012e6: f010 9978 lw v1,-32744(s1)
4012ea: d204 sw v0,16(sp)
4012ec: eb40 jalr v1
4012ee: 653b move t9,v1
4012f0: f010 997c lw v1,-32740(s1)
4012f4: f030 9920 lw s1,-32736(s1)
4012f8: e32f subu v1,s1
4012fa: 326b sra v0,v1,2
4012fc: d206 sw v0,24(sp)
4012fe: 220c beqz v0,401318 <__libc_csu_init+0x48>
401300: 6800 li s0,0
401302: 99e0 lw a3,0(s1)
401304: 4801 addiu s0,1
401306: 960e lw a2,56(sp)
401308: 4904 addiu s1,4
40130a: 950d lw a1,52(sp)
40130c: 940c lw a0,48(sp)
40130e: ef40 jalr a3
401310: 653f move t9,a3
401312: 9206 lw v0,24(sp)
401314: ea0a cmp v0,s0
401316: 61f5 btnez 401302 <__libc_csu_init+0x32>
401318: 6476 restore 48,ra,s0-s1
40131a: e8a0 jrc ra
Here `set_fast_math' is called from `40130e' (`40130f' with the ISA bit)
and emulation triggers for the CTC1 instruction. As it is in a jump
delay slot emulation continues from `401312' (`401313' with the ISA
bit). However we have no path to handle MIPS16 FPU code emulation,
because there are no MIPS16 FPU instructions. So the default emulation
path is taken, interpreting a 32-bit word fetched by `get_user' from
`401313' as a regular MIPS instruction, which is:
401313: f5ea0a92 sdc1 $f10,2706(t7)
This makes the FPU emulator proceed with the supposed SDC1 instruction
and consequently makes the program considered here terminate with
SIGSEGV.
A similar although less severe issue exists with pure-microMIPS
processors in the case where similarly an FPU instruction is emulated in
a delay slot of a register jump that (incorrectly) switches into the
regular MIPS mode. A subsequent instruction fetch from the jump's
target is supposed to cause an Address Error exception, however instead
we proceed with regular MIPS FPU emulation.
For simplicity then, always terminate the emulation loop whenever a mode
change is detected, denoted by an ISA mode bit flip. As from commit
377cb1b6c16a ("MIPS: Disable MIPS16/microMIPS crap for platforms not
supporting these ASEs.") the result of `get_isa16_mode' can be hardcoded
to 0, so we need to examine the ISA mode bit by hand.
This complements commit 102cedc32a6e ("MIPS: microMIPS: Floating point
support.") which added JALX decoding to FPU emulation.
Fixes: 102cedc32a6e ("MIPS: microMIPS: Floating point support.")
Signed-off-by: Maciej W. Rozycki <[email protected]>
Cc: James Hogan <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/16393/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/math-emu/cp1emu.c | 38 ++++++++++++++++++++++++++++++++++++++
1 file changed, 38 insertions(+)
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -2496,6 +2496,35 @@ dcopuop:
return 0;
}
+/*
+ * Emulate FPU instructions.
+ *
+ * If we use FPU hardware, then we have been typically called to handle
+ * an unimplemented operation, such as where an operand is a NaN or
+ * denormalized. In that case exit the emulation loop after a single
+ * iteration so as to let hardware execute any subsequent instructions.
+ *
+ * If we have no FPU hardware or it has been disabled, then continue
+ * emulating floating-point instructions until one of these conditions
+ * has occurred:
+ *
+ * - a non-FPU instruction has been encountered,
+ *
+ * - an attempt to emulate has ended with a signal,
+ *
+ * - the ISA mode has been switched.
+ *
+ * We need to terminate the emulation loop if we got switched to the
+ * MIPS16 mode, whether supported or not, so that we do not attempt
+ * to emulate a MIPS16 instruction as a regular MIPS FPU instruction.
+ * Similarly if we got switched to the microMIPS mode and only the
+ * regular MIPS mode is supported, so that we do not attempt to emulate
+ * a microMIPS instruction as a regular MIPS FPU instruction. Or if
+ * we got switched to the regular MIPS mode and only the microMIPS mode
+ * is supported, so that we do not attempt to emulate a regular MIPS
+ * instruction that should cause an Address Error exception instead.
+ * For simplicity we always terminate upon an ISA mode switch.
+ */
int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
int has_fpu, void *__user *fault_addr)
{
@@ -2581,6 +2610,15 @@ int fpu_emulator_cop1Handler(struct pt_r
break;
if (sig)
break;
+ /*
+ * We have to check for the ISA bit explicitly here,
+ * because `get_isa16_mode' may return 0 if support
+ * for code compression has been globally disabled,
+ * or otherwise we may produce the wrong signal or
+ * even proceed successfully where we must not.
+ */
+ if ((xcp->cp0_epc ^ prevepc) & 0x1)
+ break;
cond_resched();
} while (xcp->cp0_epc > prevepc);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Hogan <[email protected]>
commit 4915e1b043d6286928207b1f6968197b50407294 upstream.
EVA linked loads (LLE) and conditional stores (SCE) should be used on
EVA kernels for the MIPS_ATOMIC_SET operation of the sysmips system
call, or else the atomic set will apply to the kernel view of the
virtual address space (potentially unmapped on EVA kernels) rather than
the user view (TLB mapped).
Signed-off-by: James Hogan <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/16151/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/kernel/syscall.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -28,6 +28,7 @@
#include <linux/elf.h>
#include <asm/asm.h>
+#include <asm/asm-eva.h>
#include <asm/branch.h>
#include <asm/cachectl.h>
#include <asm/cacheflush.h>
@@ -138,9 +139,11 @@ static inline int mips_atomic_set(unsign
__asm__ __volatile__ (
" .set "MIPS_ISA_ARCH_LEVEL" \n"
" li %[err], 0 \n"
- "1: ll %[old], (%[addr]) \n"
+ "1: \n"
+ user_ll("%[old]", "(%[addr])")
" move %[tmp], %[new] \n"
- "2: sc %[tmp], (%[addr]) \n"
+ "2: \n"
+ user_sc("%[tmp]", "(%[addr])")
" beqz %[tmp], 4f \n"
"3: \n"
" .insn \n"
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter <[email protected]>
commit 2e028c4fe12907f226b8221815f16c2486ad3aa7 upstream.
My static checker complains that if "func" is NULL then "clear_filter"
is uninitialized. This seems like it could be true, although it's
possible something subtle is happening that I haven't seen.
kernel/trace/ftrace.c:3844 match_records()
error: uninitialized symbol 'clear_filter'.
Link: http://lkml.kernel.org/r/20170712073556.h6tkpjcdzjaozozs@mwanda
Fixes: f0a3b154bd7 ("ftrace: Clarify code for mod command")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/ftrace.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -3535,7 +3535,7 @@ match_records(struct ftrace_hash *hash,
int exclude_mod = 0;
int found = 0;
int ret;
- int clear_filter;
+ int clear_filter = 0;
if (func) {
func_g.type = filter_parse_regex(func, len, &func_g.search,
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maciej W. Rozycki <[email protected]>
commit 1f4edde422961397cf4470b347958c13c6a740bb upstream.
Use the more accurate `sigill_r2r6' name for the label used in the case
of sending SIGILL in the absence of the instruction emulator for an
earlier ISA level instruction that has been removed as from the R6 ISA,
so that the `sigill_r6' name is freed for the situation where an R6
instruction is not supposed to be interpreted, because the executing
processor does not support the R6 ISA.
Signed-off-by: Maciej W. Rozycki <[email protected]>
Cc: James Hogan <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/16397/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/kernel/branch.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -431,7 +431,7 @@ int __compute_return_epc_for_insn(struct
/* Fall through */
case jr_op:
if (NO_R6EMU && insn.r_format.func == jr_op)
- goto sigill_r6;
+ goto sigill_r2r6;
regs->cp0_epc = regs->regs[insn.r_format.rs];
break;
}
@@ -446,7 +446,7 @@ int __compute_return_epc_for_insn(struct
switch (insn.i_format.rt) {
case bltzl_op:
if (NO_R6EMU)
- goto sigill_r6;
+ goto sigill_r2r6;
case bltz_op:
if ((long)regs->regs[insn.i_format.rs] < 0) {
epc = epc + 4 + (insn.i_format.simmediate << 2);
@@ -459,7 +459,7 @@ int __compute_return_epc_for_insn(struct
case bgezl_op:
if (NO_R6EMU)
- goto sigill_r6;
+ goto sigill_r2r6;
case bgez_op:
if ((long)regs->regs[insn.i_format.rs] >= 0) {
epc = epc + 4 + (insn.i_format.simmediate << 2);
@@ -574,7 +574,7 @@ int __compute_return_epc_for_insn(struct
*/
case beql_op:
if (NO_R6EMU)
- goto sigill_r6;
+ goto sigill_r2r6;
case beq_op:
if (regs->regs[insn.i_format.rs] ==
regs->regs[insn.i_format.rt]) {
@@ -588,7 +588,7 @@ int __compute_return_epc_for_insn(struct
case bnel_op:
if (NO_R6EMU)
- goto sigill_r6;
+ goto sigill_r2r6;
case bne_op:
if (regs->regs[insn.i_format.rs] !=
regs->regs[insn.i_format.rt]) {
@@ -602,7 +602,7 @@ int __compute_return_epc_for_insn(struct
case blezl_op: /* not really i_format */
if (!insn.i_format.rt && NO_R6EMU)
- goto sigill_r6;
+ goto sigill_r2r6;
case blez_op:
/*
* Compact branches for R6 for the
@@ -637,7 +637,7 @@ int __compute_return_epc_for_insn(struct
case bgtzl_op:
if (!insn.i_format.rt && NO_R6EMU)
- goto sigill_r6;
+ goto sigill_r2r6;
case bgtz_op:
/*
* Compact branches for R6 for the
@@ -848,7 +848,7 @@ sigill_dsp:
current->comm);
force_sig(SIGILL, current);
return -EFAULT;
-sigill_r6:
+sigill_r2r6:
pr_info("%s: R2 branch but r2-to-r6 emulator is not preset - sending SIGILL.\n",
current->comm);
force_sig(SIGILL, current);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka <[email protected]>
commit f9c79bc05a2a91f4fba8bfd653579e066714b1ec upstream.
The function flush_signals clears all pending signals for the process. It
may be used by kernel threads when we need to prepare a kernel thread for
responding to signals. However using this function for an userspaces
processes is incorrect - clearing signals without the program expecting it
can cause misbehavior.
The raid1 and raid5 code uses flush_signals in its request routine because
it wants to prepare for an interruptible wait. This patch drops
flush_signals and uses sigprocmask instead to block all signals (including
SIGKILL) around the schedule() call. The signals are not lost, but the
schedule() call won't respond to them.
Signed-off-by: Mikulas Patocka <[email protected]>
Acked-by: NeilBrown <[email protected]>
Signed-off-by: Shaohua Li <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/raid1.c | 5 ++++-
drivers/md/raid5.c | 5 ++++-
2 files changed, 8 insertions(+), 2 deletions(-)
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1088,7 +1088,7 @@ static void make_request(struct mddev *m
*/
DEFINE_WAIT(w);
for (;;) {
- flush_signals(current);
+ sigset_t full, old;
prepare_to_wait(&conf->wait_barrier,
&w, TASK_INTERRUPTIBLE);
if (bio_end_sector(bio) <= mddev->suspend_lo ||
@@ -1097,7 +1097,10 @@ static void make_request(struct mddev *m
!md_cluster_ops->area_resyncing(mddev, WRITE,
bio->bi_iter.bi_sector, bio_end_sector(bio))))
break;
+ sigfillset(&full);
+ sigprocmask(SIG_BLOCK, &full, &old);
schedule();
+ sigprocmask(SIG_SETMASK, &old, NULL);
}
finish_wait(&conf->wait_barrier, &w);
}
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -5279,12 +5279,15 @@ static void make_request(struct mddev *m
* userspace, we want an interruptible
* wait.
*/
- flush_signals(current);
prepare_to_wait(&conf->wait_for_overlap,
&w, TASK_INTERRUPTIBLE);
if (logical_sector >= mddev->suspend_lo &&
logical_sector < mddev->suspend_hi) {
+ sigset_t full, old;
+ sigfillset(&full);
+ sigprocmask(SIG_BLOCK, &full, &old);
schedule();
+ sigprocmask(SIG_SETMASK, &old, NULL);
do_prepare = true;
}
goto retry;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maciej W. Rozycki <[email protected]>
commit 7b82c1058ac1f8f8b9f2b8786b1f710a57a870a8 upstream.
Fix commit e50c0a8fa60d ("Support the MIPS32 / MIPS64 DSP ASE.") and
send SIGILL rather than SIGBUS whenever an unimplemented BPOSGE32 DSP
ASE instruction has been encountered in `__compute_return_epc_for_insn'
as our Reserved Instruction exception handler would in response to an
attempt to actually execute the instruction. Sending SIGBUS only makes
sense for the unaligned PC case, since moved to `__compute_return_epc'.
Adjust function documentation accordingly, correct formatting and use
`pr_info' rather than `printk' as the other exit path already does.
Fixes: e50c0a8fa60d ("Support the MIPS32 / MIPS64 DSP ASE.")
Signed-off-by: Maciej W. Rozycki <[email protected]>
Cc: James Hogan <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/16396/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/kernel/branch.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -399,7 +399,7 @@ int __MIPS16e_compute_return_epc(struct
*
* @regs: Pointer to pt_regs
* @insn: branch instruction to decode
- * @returns: -EFAULT on error and forces SIGBUS, and on success
+ * @returns: -EFAULT on error and forces SIGILL, and on success
* returns 0 or BRANCH_LIKELY_TAKEN as appropriate after
* evaluating the branch.
*
@@ -844,8 +844,9 @@ int __compute_return_epc_for_insn(struct
return ret;
sigill_dsp:
- printk("%s: DSP branch but not DSP ASE - sending SIGBUS.\n", current->comm);
- force_sig(SIGBUS, current);
+ pr_info("%s: DSP branch but not DSP ASE - sending SIGILL.\n",
+ current->comm);
+ force_sig(SIGILL, current);
return -EFAULT;
sigill_r6:
pr_info("%s: R2 branch but r2-to-r6 emulator is not preset - sending SIGILL.\n",
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Devin Heitmueller <[email protected]>
commit 4e0973a918b9a42e217093f078e04a61e5dd95a5 upstream.
Setting initial standard at the top of cx8800_initdev would cause the
first call to cx88_set_tvnorm() to return without programming any
registers (leaving the driver saying it's set to NTSC but the hardware
isn't programmed). Even worse, any subsequent attempt to explicitly
set it to NTSC-M will return success but actually fail to program the
underlying registers unless first changing the standard to something
other than NTSC-M.
Set the initial standard later in the process, and make sure the field
is zero at the beginning to ensure that the call always goes through.
This regression was introduced in the following commit:
commit ccd6f1d488e7 ("[media] cx88: move width, height and field to core
struct")
Author: Hans Verkuil <[email protected]>
[media] cx88: move width, height and field to core struct
Signed-off-by: Devin Heitmueller <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/pci/cx88/cx88-cards.c | 9 ++++++++-
drivers/media/pci/cx88/cx88-video.c | 2 +-
2 files changed, 9 insertions(+), 2 deletions(-)
--- a/drivers/media/pci/cx88/cx88-cards.c
+++ b/drivers/media/pci/cx88/cx88-cards.c
@@ -3691,7 +3691,14 @@ struct cx88_core *cx88_core_create(struc
core->nr = nr;
sprintf(core->name, "cx88[%d]", core->nr);
- core->tvnorm = V4L2_STD_NTSC_M;
+ /*
+ * Note: Setting initial standard here would cause first call to
+ * cx88_set_tvnorm() to return without programming any registers. Leave
+ * it blank for at this point and it will get set later in
+ * cx8800_initdev()
+ */
+ core->tvnorm = 0;
+
core->width = 320;
core->height = 240;
core->field = V4L2_FIELD_INTERLACED;
--- a/drivers/media/pci/cx88/cx88-video.c
+++ b/drivers/media/pci/cx88/cx88-video.c
@@ -1429,7 +1429,7 @@ static int cx8800_initdev(struct pci_dev
/* initial device configuration */
mutex_lock(&core->lock);
- cx88_set_tvnorm(core, core->tvnorm);
+ cx88_set_tvnorm(core, V4L2_STD_NTSC_M);
v4l2_ctrl_handler_setup(&core->video_hdl);
v4l2_ctrl_handler_setup(&core->audio_hdl);
cx88_video_mux(core, 0);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maciej W. Rozycki <[email protected]>
commit 11a3799dbeb620bf0400b1fda5cc2c6bea55f20a upstream.
Fix a regression introduced with commit fb6883e5809c ("MIPS: microMIPS:
Support handling of delay slots.") and defer to `__compute_return_epc'
if the ISA bit is set in EPC with non-MIPS16, non-microMIPS hardware,
which will then arrange for a SIGBUS due to an unaligned instruction
reference. Returning EPC here is never correct as the API defines this
function's result to be either a negative error code on failure or one
of 0 and BRANCH_LIKELY_TAKEN on success.
Fixes: fb6883e5809c ("MIPS: microMIPS: Support handling of delay slots.")
Signed-off-by: Maciej W. Rozycki <[email protected]>
Cc: James Hogan <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/16395/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/include/asm/branch.h | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
--- a/arch/mips/include/asm/branch.h
+++ b/arch/mips/include/asm/branch.h
@@ -74,10 +74,7 @@ static inline int compute_return_epc(str
return __microMIPS_compute_return_epc(regs);
if (cpu_has_mips16)
return __MIPS16e_compute_return_epc(regs);
- return regs->cp0_epc;
- }
-
- if (!delay_slot(regs)) {
+ } else if (!delay_slot(regs)) {
regs->cp0_epc += 4;
return 0;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maciej W. Rozycki <[email protected]>
commit a9db101b735a9d49295326ae41f610f6da62b08c upstream.
Complement commit fb6883e5809c ("MIPS: microMIPS: Support handling of
delay slots.") and actually decode the regular MIPS JALX major
instruction opcode, the handling of which has been added with the said
commit for EPC calculation in `__compute_return_epc_for_insn'.
Fixes: fb6883e5809c ("MIPS: microMIPS: Support handling of delay slots.")
Signed-off-by: Maciej W. Rozycki <[email protected]>
Cc: James Hogan <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/16394/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/kernel/branch.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -556,6 +556,7 @@ int __compute_return_epc_for_insn(struct
/*
* These are unconditional and in j_format.
*/
+ case jalx_op:
case jal_op:
regs->regs[31] = regs->cp0_epc + 8;
case j_op:
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Williamson <[email protected]>
commit 5d6dee80a1e94cc284d03e06d930e60e8d3ecf7d upstream.
At the point where the kvm-vfio pseudo device wants to release its
vfio group reference, we can't always acquire a new reference to make
that happen. The group can be in a state where we wouldn't allow a
new reference to be added. This new helper function allows a caller
to match a file to a group to facilitate this. Given a file and
group, report if they match. Thus the caller needs to already have a
group reference to match to the file. This allows the deletion of a
group without acquiring a new reference.
Signed-off-by: Alex Williamson <[email protected]>
Reviewed-by: Eric Auger <[email protected]>
Reviewed-by: Paolo Bonzini <[email protected]>
Tested-by: Eric Auger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/vfio/vfio.c | 9 +++++++++
include/linux/vfio.h | 2 ++
virt/kvm/vfio.c | 27 +++++++++++++++++++--------
3 files changed, 30 insertions(+), 8 deletions(-)
--- a/drivers/vfio/vfio.c
+++ b/drivers/vfio/vfio.c
@@ -1587,6 +1587,15 @@ void vfio_group_put_external_user(struct
}
EXPORT_SYMBOL_GPL(vfio_group_put_external_user);
+bool vfio_external_group_match_file(struct vfio_group *test_group,
+ struct file *filep)
+{
+ struct vfio_group *group = filep->private_data;
+
+ return (filep->f_op == &vfio_group_fops) && (group == test_group);
+}
+EXPORT_SYMBOL_GPL(vfio_external_group_match_file);
+
int vfio_external_user_iommu_id(struct vfio_group *group)
{
return iommu_group_id(group->iommu_group);
--- a/include/linux/vfio.h
+++ b/include/linux/vfio.h
@@ -85,6 +85,8 @@ extern void vfio_unregister_iommu_driver
*/
extern struct vfio_group *vfio_group_get_external_user(struct file *filep);
extern void vfio_group_put_external_user(struct vfio_group *group);
+extern bool vfio_external_group_match_file(struct vfio_group *group,
+ struct file *filep);
extern int vfio_external_user_iommu_id(struct vfio_group *group);
extern long vfio_external_check_extension(struct vfio_group *group,
unsigned long arg);
--- a/virt/kvm/vfio.c
+++ b/virt/kvm/vfio.c
@@ -47,6 +47,22 @@ static struct vfio_group *kvm_vfio_group
return vfio_group;
}
+static bool kvm_vfio_external_group_match_file(struct vfio_group *group,
+ struct file *filep)
+{
+ bool ret, (*fn)(struct vfio_group *, struct file *);
+
+ fn = symbol_get(vfio_external_group_match_file);
+ if (!fn)
+ return false;
+
+ ret = fn(group, filep);
+
+ symbol_put(vfio_external_group_match_file);
+
+ return ret;
+}
+
static void kvm_vfio_group_put_external_user(struct vfio_group *vfio_group)
{
void (*fn)(struct vfio_group *);
@@ -171,18 +187,13 @@ static int kvm_vfio_set_group(struct kvm
if (!f.file)
return -EBADF;
- vfio_group = kvm_vfio_group_get_external_user(f.file);
- fdput(f);
-
- if (IS_ERR(vfio_group))
- return PTR_ERR(vfio_group);
-
ret = -ENOENT;
mutex_lock(&kv->lock);
list_for_each_entry(kvg, &kv->group_list, node) {
- if (kvg->vfio_group != vfio_group)
+ if (!kvm_vfio_external_group_match_file(kvg->vfio_group,
+ f.file))
continue;
list_del(&kvg->node);
@@ -196,7 +207,7 @@ static int kvm_vfio_set_group(struct kvm
mutex_unlock(&kv->lock);
- kvm_vfio_group_put_external_user(vfio_group);
+ fdput(f);
kvm_vfio_update_coherency(dev);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xiao Ni <[email protected]>
commit b5d27718f38843a74552e9a93d32e2391fd3999f upstream.
The raid5 md device is created by the disks which we don't use the total size. For example,
the size of the device is 5G and it just uses 3G of the devices to create one raid5 device.
Then change the chunksize and wait reshape to finish. After reshape finishing stop the raid
and assemble it again. It fails.
mdadm -CR /dev/md0 -l5 -n3 /dev/loop[0-2] --size=3G --chunk=32 --assume-clean
mdadm /dev/md0 --grow --chunk=64
wait reshape to finish
mdadm -S /dev/md0
mdadm -As
The error messages:
[197519.814302] md: loop1 does not have a valid v1.2 superblock, not importing!
[197519.821686] md: md_import_device returned -22
After reshape the data offset is changed. It selects backwards direction in this condition.
In function super_1_load it compares the available space of the underlying device with
sb->data_size. The new data offset gets bigger after reshape. So super_1_load returns -EINVAL.
rdev->sectors is updated in md_finish_reshape. Then sb->data_size is set in super_1_sync based
on rdev->sectors. So add md_finish_reshape in end_reshape.
Signed-off-by: Xiao Ni <[email protected]>
Acked-by: Guoqing Jiang <[email protected]>
Signed-off-by: Shaohua Li <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/raid5.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -7531,12 +7531,10 @@ static void end_reshape(struct r5conf *c
{
if (!test_bit(MD_RECOVERY_INTR, &conf->mddev->recovery)) {
- struct md_rdev *rdev;
spin_lock_irq(&conf->device_lock);
conf->previous_raid_disks = conf->raid_disks;
- rdev_for_each(rdev, conf->mddev)
- rdev->data_offset = rdev->new_data_offset;
+ md_finish_reshape(conf->mddev);
smp_wmb();
conf->reshape_progress = MaxSector;
conf->mddev->reshape_position = MaxSector;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Colin Ian King <[email protected]>
commit 446230f52a5bef593554510302465eabab45a372 upstream.
When us->extra is null the driver is not initialized, however, a
later call to osd200_scsi_to_ata is made that dereferences
us->extra, causing a null pointer dereference. The code
currently detects and reports that the driver is not initialized;
add a return to avoid the subsequent dereference issue in this
check.
Thanks to Alan Stern for pointing out that srb->result needs setting
to DID_ERROR << 16
Detected by CoverityScan, CID#100308 ("Dereference after null check")
Signed-off-by: Colin Ian King <[email protected]>
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/storage/isd200.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -1520,8 +1520,11 @@ static void isd200_ata_command(struct sc
/* Make sure driver was initialized */
- if (us->extra == NULL)
+ if (us->extra == NULL) {
usb_stor_dbg(us, "ERROR Driver not initialized\n");
+ srb->result = DID_ERROR << 16;
+ return;
+ }
scsi_set_resid(srb, 0);
/* scsi_bufflen might change in protocol translation to ata */
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiri Olsa <[email protected]>
commit c46fc0424ced3fb71208e72bd597d91b9169a781 upstream.
Zorro reported following crash while having enabled
syscall tracing (CONFIG_FTRACE_SYSCALLS):
Unable to handle kernel pointer dereference at virtual ...
Oops: 0011 [#1] SMP DEBUG_PAGEALLOC
SNIP
Call Trace:
([<000000000024d79c>] ftrace_syscall_enter+0xec/0x1d8)
[<00000000001099c6>] do_syscall_trace_enter+0x236/0x2f8
[<0000000000730f1c>] sysc_tracesys+0x1a/0x32
[<000003fffcf946a2>] 0x3fffcf946a2
INFO: lockdep is turned off.
Last Breaking-Event-Address:
[<000000000022dd44>] rb_event_data+0x34/0x40
---[ end trace 8c795f86b1b3f7b9 ]---
The crash happens in syscall_get_arguments function for
syscalls with zero arguments, that will try to access
first argument (args[0]) in event entry, but it's not
allocated.
Bail out of there are no arguments.
Reported-by: Zorro Lang <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/include/asm/syscall.h | 6 ++++++
1 file changed, 6 insertions(+)
--- a/arch/s390/include/asm/syscall.h
+++ b/arch/s390/include/asm/syscall.h
@@ -64,6 +64,12 @@ static inline void syscall_get_arguments
{
unsigned long mask = -1UL;
+ /*
+ * No arguments for this syscall, there's nothing to do.
+ */
+ if (!n)
+ return;
+
BUG_ON(i + n > 6);
#ifdef CONFIG_COMPAT
if (test_tsk_thread_flag(task, TIF_31BIT))
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yoshihiro Shimoda <[email protected]>
commit b8b9c974afee685789fcbb191b52d1790be3608c upstream.
A gadget driver will not disable eps immediately when ->disconnect()
is called. But, since this driver assumes all eps stop after
the ->disconnect(), unexpected behavior happens (especially in system
suspend).
So, this patch disables all eps in usbhsg_try_stop(). After disabling
eps by renesas_usbhs driver, since some functions will be called by
both a gadget and renesas_usbhs driver, renesas_usbhs driver should
protect uep->pipe. To protect uep->pipe easily, this patch adds a new
lock in struct usbhsg_uep.
Fixes: 2f98382dc ("usb: renesas_usbhs: Add Renesas USBHS Gadget")
Signed-off-by: Yoshihiro Shimoda <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/renesas_usbhs/mod_gadget.c | 31 ++++++++++++++++++++++++-------
1 file changed, 24 insertions(+), 7 deletions(-)
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -37,6 +37,7 @@ struct usbhsg_gpriv;
struct usbhsg_uep {
struct usb_ep ep;
struct usbhs_pipe *pipe;
+ spinlock_t lock; /* protect the pipe */
char ep_name[EP_NAME_SIZE];
@@ -638,10 +639,16 @@ usbhsg_ep_enable_end:
static int usbhsg_ep_disable(struct usb_ep *ep)
{
struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep);
- struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
+ struct usbhs_pipe *pipe;
+ unsigned long flags;
+ int ret = 0;
- if (!pipe)
- return -EINVAL;
+ spin_lock_irqsave(&uep->lock, flags);
+ pipe = usbhsg_uep_to_pipe(uep);
+ if (!pipe) {
+ ret = -EINVAL;
+ goto out;
+ }
usbhsg_pipe_disable(uep);
usbhs_pipe_free(pipe);
@@ -649,6 +656,9 @@ static int usbhsg_ep_disable(struct usb_
uep->pipe->mod_private = NULL;
uep->pipe = NULL;
+out:
+ spin_unlock_irqrestore(&uep->lock, flags);
+
return 0;
}
@@ -698,8 +708,11 @@ static int usbhsg_ep_dequeue(struct usb_
{
struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep);
struct usbhsg_request *ureq = usbhsg_req_to_ureq(req);
- struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
+ struct usbhs_pipe *pipe;
+ unsigned long flags;
+ spin_lock_irqsave(&uep->lock, flags);
+ pipe = usbhsg_uep_to_pipe(uep);
if (pipe)
usbhs_pkt_pop(pipe, usbhsg_ureq_to_pkt(ureq));
@@ -708,6 +721,7 @@ static int usbhsg_ep_dequeue(struct usb_
* even if the pipe is NULL.
*/
usbhsg_queue_pop(uep, ureq, -ECONNRESET);
+ spin_unlock_irqrestore(&uep->lock, flags);
return 0;
}
@@ -854,10 +868,10 @@ static int usbhsg_try_stop(struct usbhs_
{
struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
struct usbhs_mod *mod = usbhs_mod_get_current(priv);
- struct usbhsg_uep *dcp = usbhsg_gpriv_to_dcp(gpriv);
+ struct usbhsg_uep *uep;
struct device *dev = usbhs_priv_to_dev(priv);
unsigned long flags;
- int ret = 0;
+ int ret = 0, i;
/******************** spin lock ********************/
usbhs_lock(priv, flags);
@@ -889,7 +903,9 @@ static int usbhsg_try_stop(struct usbhs_
usbhs_sys_set_test_mode(priv, 0);
usbhs_sys_function_ctrl(priv, 0);
- usbhsg_ep_disable(&dcp->ep);
+ /* disable all eps */
+ usbhsg_for_each_uep_with_dcp(uep, gpriv, i)
+ usbhsg_ep_disable(&uep->ep);
dev_dbg(dev, "stop gadget\n");
@@ -1072,6 +1088,7 @@ int usbhs_mod_gadget_probe(struct usbhs_
ret = -ENOMEM;
goto usbhs_mod_gadget_probe_err_gpriv;
}
+ spin_lock_init(&uep->lock);
gpriv->transceiver = usb_get_phy(USB_PHY_TYPE_UNDEFINED);
dev_info(dev, "%stransceiver found\n",
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yoshihiro Shimoda <[email protected]>
commit 59a0879a0e17b2e43ecdc5e3299da85b8410d7ce upstream.
This patch fixes an issue that some registers may be not initialized
after resume if the USBHSF_RUNTIME_PWCTRL is not set. Otherwise,
if a cable is not connected, the driver will not enable INTENB0.VBSE
after resume. And then, the driver cannot detect the VBUS.
Fixes: ca8a282a5373 ("usb: gadget: renesas_usbhs: add suspend/resume support")
Signed-off-by: Yoshihiro Shimoda <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/renesas_usbhs/common.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/usb/renesas_usbhs/common.c
+++ b/drivers/usb/renesas_usbhs/common.c
@@ -733,8 +733,10 @@ static int usbhsc_resume(struct device *
struct usbhs_priv *priv = dev_get_drvdata(dev);
struct platform_device *pdev = usbhs_priv_to_pdev(priv);
- if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
+ if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) {
usbhsc_power_ctrl(priv, 1);
+ usbhs_mod_autonomy_mode(priv);
+ }
usbhs_platform_call(priv, phy_reset, pdev);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit fe855789d605590e57f9cd968d85ecce46f5c3fd upstream.
Add device-id entry for DATECS FP-2000 fiscal printer needing the
NO_UNION_NORMAL quirk.
Reported-by: Anton Avramov <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Acked-by: Oliver Neukum <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/class/cdc-acm.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1759,6 +1759,9 @@ static const struct usb_device_id acm_id
{ USB_DEVICE(0x1576, 0x03b1), /* Maretron USB100 */
.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
},
+ { USB_DEVICE(0xfff0, 0x0100), /* DATECS FP-2000 */
+ .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
+ },
{ USB_DEVICE(0x2912, 0x0001), /* ATOL FPrint */
.driver_info = CLEAR_HALT_CONDITIONS,
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jaegeuk Kim <[email protected]>
commit c925dc162f770578ff4a65ec9b08270382dba9e6 upstream.
This patch copies commit b7f8a09f80:
"btrfs: Don't clear SGID when inheriting ACLs" written by Jan.
Fixes: 073931017b49d9458aa351605b43a7e34598caef
Signed-off-by: Jan Kara <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/f2fs/acl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/f2fs/acl.c
+++ b/fs/f2fs/acl.c
@@ -213,7 +213,7 @@ static int __f2fs_set_acl(struct inode *
switch (type) {
case ACL_TYPE_ACCESS:
name_index = F2FS_XATTR_INDEX_POSIX_ACL_ACCESS;
- if (acl) {
+ if (acl && !ipage) {
error = posix_acl_update_mode(inode, &inode->i_mode, &acl);
if (error)
return error;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Corey Minyard <[email protected]>
commit 4495ec6d770e1bca7a04e93ac453ab6720c56c5d upstream.
When getting flags, a response to a different message would
result in a deadlock because of a missing unlock. Add that
unlock and a comment. Found by static analysis.
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Corey Minyard <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/ipmi/ipmi_ssif.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/char/ipmi/ipmi_ssif.c
+++ b/drivers/char/ipmi/ipmi_ssif.c
@@ -758,6 +758,11 @@ static void msg_done_handler(struct ssif
result, len, data[2]);
} else if (data[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2
|| data[1] != IPMI_GET_MSG_FLAGS_CMD) {
+ /*
+ * Don't abort here, maybe it was a queued
+ * response to a previous command.
+ */
+ ipmi_ssif_unlock_cond(ssif_info, flags);
pr_warn(PFX "Invalid response getting flags: %x %x\n",
data[0], data[1]);
} else {
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tony Camuso <[email protected]>
commit cdea46566bb21ce309725a024208322a409055cc upstream.
A vendor with a system having more than 128 CPUs occasionally encounters
the following crash during shutdown. This is not an easily reproduceable
event, but the vendor was able to provide the following analysis of the
crash, which exhibits the same footprint each time.
crash> bt
PID: 0 TASK: ffff88017c70ce70 CPU: 5 COMMAND: "swapper/5"
#0 [ffff88085c143ac8] machine_kexec at ffffffff81059c8b
#1 [ffff88085c143b28] __crash_kexec at ffffffff811052e2
#2 [ffff88085c143bf8] crash_kexec at ffffffff811053d0
#3 [ffff88085c143c10] oops_end at ffffffff8168ef88
#4 [ffff88085c143c38] no_context at ffffffff8167ebb3
#5 [ffff88085c143c88] __bad_area_nosemaphore at ffffffff8167ec49
#6 [ffff88085c143cd0] bad_area_nosemaphore at ffffffff8167edb3
#7 [ffff88085c143ce0] __do_page_fault at ffffffff81691d1e
#8 [ffff88085c143d40] do_page_fault at ffffffff81691ec5
#9 [ffff88085c143d70] page_fault at ffffffff8168e188
[exception RIP: unknown or invalid address]
RIP: ffffffffa053c800 RSP: ffff88085c143e28 RFLAGS: 00010206
RAX: ffff88017c72bfd8 RBX: ffff88017a8dc000 RCX: ffff8810588b5ac8
RDX: ffff8810588b5a00 RSI: ffffffffa053c800 RDI: ffff8810588b5a00
RBP: ffff88085c143e58 R8: ffff88017c70d408 R9: ffff88017a8dc000
R10: 0000000000000002 R11: ffff88085c143da0 R12: ffff8810588b5ac8
R13: 0000000000000100 R14: ffffffffa053c800 R15: ffff8810588b5a00
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
<IRQ stack>
[exception RIP: cpuidle_enter_state+82]
RIP: ffffffff81514192 RSP: ffff88017c72be50 RFLAGS: 00000202
RAX: 0000001e4c3c6f16 RBX: 000000000000f8a0 RCX: 0000000000000018
RDX: 0000000225c17d03 RSI: ffff88017c72bfd8 RDI: 0000001e4c3c6f16
RBP: ffff88017c72be78 R8: 000000000000237e R9: 0000000000000018
R10: 0000000000002494 R11: 0000000000000001 R12: ffff88017c72be20
R13: ffff88085c14f8e0 R14: 0000000000000082 R15: 0000001e4c3bb400
ORIG_RAX: ffffffffffffff10 CS: 0010 SS: 0018
This is the corresponding stack trace
It has crashed because the area pointed with RIP extracted from timer
element is already removed during a shutdown process.
The function is smi_timeout().
And we think ffff8810588b5a00 in RDX is a parameter struct smi_info
crash> rd ffff8810588b5a00 20
ffff8810588b5a00: ffff8810588b6000 0000000000000000 .`.X............
ffff8810588b5a10: ffff880853264400 ffffffffa05417e0 .D&S......T.....
ffff8810588b5a20: 24a024a000000000 0000000000000000 .....$.$........
ffff8810588b5a30: 0000000000000000 0000000000000000 ................
ffff8810588b5a30: 0000000000000000 0000000000000000 ................
ffff8810588b5a40: ffffffffa053a040 ffffffffa053a060 @.S.....`.S.....
ffff8810588b5a50: 0000000000000000 0000000100000001 ................
ffff8810588b5a60: 0000000000000000 0000000000000e00 ................
ffff8810588b5a70: ffffffffa053a580 ffffffffa053a6e0 ..S.......S.....
ffff8810588b5a80: ffffffffa053a4a0 ffffffffa053a250 ..S.....P.S.....
ffff8810588b5a90: 0000000500000002 0000000000000000 ................
Unfortunately the top of this area is already detroyed by someone.
But because of two reasonns we think this is struct smi_info
1) The address included in between ffff8810588b5a70 and ffff8810588b5a80:
are inside of ipmi_si_intf.c see crash> module ffff88085779d2c0
2) We've found the area which point this.
It is offset 0x68 of ffff880859df4000
crash> rd ffff880859df4000 100
ffff880859df4000: 0000000000000000 0000000000000001 ................
ffff880859df4010: ffffffffa0535290 dead000000000200 .RS.............
ffff880859df4020: ffff880859df4020 ffff880859df4020 @.Y.... @.Y....
ffff880859df4030: 0000000000000002 0000000000100010 ................
ffff880859df4040: ffff880859df4040 ffff880859df4040 @@.Y....@@.Y....
ffff880859df4050: 0000000000000000 0000000000000000 ................
ffff880859df4060: 0000000000000000 ffff8810588b5a00 .........Z.X....
ffff880859df4070: 0000000000000001 ffff880859df4078 [email protected]....
If we regards it as struct ipmi_smi in shutdown process
it looks consistent.
The remedy for this apparent race is affixed below.
Signed-off-by: Tony Camuso <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
This was first introduced in 7ea0ed2b5be817 ipmi: Make the
message handler easier to use for SMI interfaces
where some code was moved outside of the rcu_read_lock()
and the lock was not added.
Signed-off-by: Corey Minyard <[email protected]>
---
drivers/char/ipmi/ipmi_msghandler.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -3877,6 +3877,9 @@ static void smi_recv_tasklet(unsigned lo
* because the lower layer is allowed to hold locks while calling
* message delivery.
*/
+
+ rcu_read_lock();
+
if (!run_to_completion)
spin_lock_irqsave(&intf->xmit_msgs_lock, flags);
if (intf->curr_msg == NULL && !intf->in_shutdown) {
@@ -3899,6 +3902,8 @@ static void smi_recv_tasklet(unsigned lo
if (newmsg)
intf->handlers->sender(intf->send_info, newmsg);
+ rcu_read_unlock();
+
handle_new_recv_msgs(intf);
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chen Yu <[email protected]>
commit e60514bd4485c0c7c5a7cf779b200ce0b95c70d6 upstream.
Currently we saw a lot of "No irq handler" errors during hibernation, which
caused the system hang finally:
ata4.00: qc timeout (cmd 0xec)
ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata4.00: revalidation failed (errno=-5)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
do_IRQ: 31.151 No irq handler for vector
According to above logs, there is an interrupt triggered and it is
dispatched to CPU31 with a vector number 151, but there is no handler for
it, thus this IRQ will not get acked and will cause an IRQ flood which
kills the system. To be more specific, the 31.151 is an interrupt from the
AHCI host controller.
After some investigation, the reason why this issue is triggered is because
the thaw_noirq() function does not restore the MSI/MSI-X settings across
hibernation.
The scenario is illustrated below:
1. Before hibernation, IRQ 34 is the handler for the AHCI device, which
is bound to CPU31.
2. Hibernation starts, the AHCI device is put into low power state.
3. All the nonboot CPUs are put offline, so IRQ 34 has to be migrated to
the last alive one - CPU0.
4. After the snapshot has been created, all the nonboot CPUs are brought
up again; IRQ 34 remains bound to CPU0.
5. AHCI devices are put into D0.
6. The snapshot is written to the disk.
The issue is triggered in step 6. The AHCI interrupt should be delivered
to CPU0, however it is delivered to the original CPU31 instead, which
causes the "No irq handler" issue.
Ying Huang has provided a clue that, in step 3 it is possible that writing
to the register might not take effect as the PCI devices have been
suspended.
In step 3, the IRQ 34 affinity should be modified from CPU31 to CPU0, but
in fact it is not. In __pci_write_msi_msg(), if the device is already in
low power state, the low level MSI message entry will not be updated but
cached. During the device restore process after a normal suspend/resume,
pci_restore_msi_state() writes the cached MSI back to the hardware.
But this is not the case for hibernation. pci_restore_msi_state() is not
currently called in pci_pm_thaw_noirq(), although pci_save_state() has
saved the necessary PCI cached information in pci_pm_freeze_noirq().
Restore the PCI status for the device during hibernation. Otherwise the
status might be lost across hibernation (for example, settings for MSI,
MSI-X, ATS, ACS, IOV, etc.), which might cause problems during hibernation.
Suggested-by: Ying Huang <[email protected]>
Suggested-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Chen Yu <[email protected]>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]>
Cc: Len Brown <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Rui Zhang <[email protected]>
Cc: Ying Huang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/pci-driver.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -945,6 +945,7 @@ static int pci_pm_thaw_noirq(struct devi
return pci_legacy_resume_early(dev);
pci_update_current_state(pci_dev, PCI_D0);
+ pci_restore_state(pci_dev);
if (drv && drv->pm && drv->pm->thaw_noirq)
error = drv->pm->thaw_noirq(dev);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Herbert Xu <[email protected]>
commit 096f41d3a8fcbb8dde7f71379b1ca85fe213eded upstream.
The parsing of sadb_x_ipsecrequest is broken in a number of ways.
First of all we're not verifying sadb_x_ipsecrequest_len. This
is needed when the structure carries addresses at the end. Worse
we don't even look at the length when we parse those optional
addresses.
The migration code had similar parsing code that's better but
it also has some deficiencies. The length is overcounted first
of all as it includes the header itself. It also fails to check
the length before dereferencing the sa_family field.
This patch fixes those problems in parse_sockaddr_pair and then
uses it in parse_ipsecrequest.
Reported-by: Andrey Konovalov <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/key/af_key.c | 47 ++++++++++++++++++++++++++---------------------
1 file changed, 26 insertions(+), 21 deletions(-)
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -65,6 +65,10 @@ struct pfkey_sock {
} dump;
};
+static int parse_sockaddr_pair(struct sockaddr *sa, int ext_len,
+ xfrm_address_t *saddr, xfrm_address_t *daddr,
+ u16 *family);
+
static inline struct pfkey_sock *pfkey_sk(struct sock *sk)
{
return (struct pfkey_sock *)sk;
@@ -1922,19 +1926,14 @@ parse_ipsecrequest(struct xfrm_policy *x
/* addresses present only in tunnel mode */
if (t->mode == XFRM_MODE_TUNNEL) {
- u8 *sa = (u8 *) (rq + 1);
- int family, socklen;
+ int err;
- family = pfkey_sockaddr_extract((struct sockaddr *)sa,
- &t->saddr);
- if (!family)
- return -EINVAL;
-
- socklen = pfkey_sockaddr_len(family);
- if (pfkey_sockaddr_extract((struct sockaddr *)(sa + socklen),
- &t->id.daddr) != family)
- return -EINVAL;
- t->encap_family = family;
+ err = parse_sockaddr_pair(
+ (struct sockaddr *)(rq + 1),
+ rq->sadb_x_ipsecrequest_len - sizeof(*rq),
+ &t->saddr, &t->id.daddr, &t->encap_family);
+ if (err)
+ return err;
} else
t->encap_family = xp->family;
@@ -1954,7 +1953,11 @@ parse_ipsecrequests(struct xfrm_policy *
if (pol->sadb_x_policy_len * 8 < sizeof(struct sadb_x_policy))
return -EINVAL;
- while (len >= sizeof(struct sadb_x_ipsecrequest)) {
+ while (len >= sizeof(*rq)) {
+ if (len < rq->sadb_x_ipsecrequest_len ||
+ rq->sadb_x_ipsecrequest_len < sizeof(*rq))
+ return -EINVAL;
+
if ((err = parse_ipsecrequest(xp, rq)) < 0)
return err;
len -= rq->sadb_x_ipsecrequest_len;
@@ -2417,7 +2420,6 @@ out:
return err;
}
-#ifdef CONFIG_NET_KEY_MIGRATE
static int pfkey_sockaddr_pair_size(sa_family_t family)
{
return PFKEY_ALIGN8(pfkey_sockaddr_len(family) * 2);
@@ -2429,7 +2431,7 @@ static int parse_sockaddr_pair(struct so
{
int af, socklen;
- if (ext_len < pfkey_sockaddr_pair_size(sa->sa_family))
+ if (ext_len < 2 || ext_len < pfkey_sockaddr_pair_size(sa->sa_family))
return -EINVAL;
af = pfkey_sockaddr_extract(sa, saddr);
@@ -2445,6 +2447,7 @@ static int parse_sockaddr_pair(struct so
return 0;
}
+#ifdef CONFIG_NET_KEY_MIGRATE
static int ipsecrequests_to_migrate(struct sadb_x_ipsecrequest *rq1, int len,
struct xfrm_migrate *m)
{
@@ -2452,13 +2455,14 @@ static int ipsecrequests_to_migrate(stru
struct sadb_x_ipsecrequest *rq2;
int mode;
- if (len <= sizeof(struct sadb_x_ipsecrequest) ||
- len < rq1->sadb_x_ipsecrequest_len)
+ if (len < sizeof(*rq1) ||
+ len < rq1->sadb_x_ipsecrequest_len ||
+ rq1->sadb_x_ipsecrequest_len < sizeof(*rq1))
return -EINVAL;
/* old endoints */
err = parse_sockaddr_pair((struct sockaddr *)(rq1 + 1),
- rq1->sadb_x_ipsecrequest_len,
+ rq1->sadb_x_ipsecrequest_len - sizeof(*rq1),
&m->old_saddr, &m->old_daddr,
&m->old_family);
if (err)
@@ -2467,13 +2471,14 @@ static int ipsecrequests_to_migrate(stru
rq2 = (struct sadb_x_ipsecrequest *)((u8 *)rq1 + rq1->sadb_x_ipsecrequest_len);
len -= rq1->sadb_x_ipsecrequest_len;
- if (len <= sizeof(struct sadb_x_ipsecrequest) ||
- len < rq2->sadb_x_ipsecrequest_len)
+ if (len <= sizeof(*rq2) ||
+ len < rq2->sadb_x_ipsecrequest_len ||
+ rq2->sadb_x_ipsecrequest_len < sizeof(*rq2))
return -EINVAL;
/* new endpoints */
err = parse_sockaddr_pair((struct sockaddr *)(rq2 + 1),
- rq2->sadb_x_ipsecrequest_len,
+ rq2->sadb_x_ipsecrequest_len - sizeof(*rq2),
&m->new_saddr, &m->new_daddr,
&m->new_family);
if (err)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oliver O'Halloran <[email protected]>
commit 2400fd822f467cb4c886c879d8ad99feac9cf319 upstream.
The workaround for the CELL timebase bug does not correctly mark cr0 as
being clobbered. This means GCC doesn't know that the asm block changes cr0 and
might leave the result of an unrelated comparison in cr0 across the block, which
we then trash, leading to basically random behaviour.
Fixes: 859deea949c3 ("[POWERPC] Cell timebase bug workaround")
Signed-off-by: Oliver O'Halloran <[email protected]>
[mpe: Tweak change log and flag for stable]
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/include/asm/reg.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -1236,7 +1236,7 @@ static inline unsigned long mfvtb (void)
" .llong 0\n" \
".previous" \
: "=r" (rval) \
- : "i" (CPU_FTR_CELL_TB_BUG), "i" (SPRN_TBRL)); \
+ : "i" (CPU_FTR_CELL_TB_BUG), "i" (SPRN_TBRL) : "cr0"); \
rval;})
#else
#define mftb() ({unsigned long rval; \
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Julian Anastasov <[email protected]>
commit 3c5ab3f395d66a9e4e937fcfdf6ebc63894f028b upstream.
We do not check if packet from real server is for NAT
connection before performing SNAT. This causes problems
for setups that use DR/TUN and allow local clients to
access the real server directly, for example:
- local client in director creates IPVS-DR/TUN connection
CIP->VIP and the request packets are routed to RIP.
Talks are finished but IPVS connection is not expired yet.
- second local client creates non-IPVS connection CIP->RIP
with same reply tuple RIP->CIP and when replies are received
on LOCAL_IN we wrongly assign them for the first client
connection because RIP->CIP matches the reply direction.
As result, IPVS SNATs replies for non-IPVS connections.
The problem is more visible to local UDP clients but in rare
cases it can happen also for TCP or remote clients when the
real server sends the reply traffic via the director.
So, better to be more precise for the reply traffic.
As replies are not expected for DR/TUN connections, better
to not touch them.
Reported-by: Nick Moriarty <[email protected]>
Tested-by: Nick Moriarty <[email protected]>
Signed-off-by: Julian Anastasov <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/netfilter/ipvs/ip_vs_core.c | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)
--- a/net/netfilter/ipvs/ip_vs_core.c
+++ b/net/netfilter/ipvs/ip_vs_core.c
@@ -845,10 +845,8 @@ static int handle_response_icmp(int af,
{
unsigned int verdict = NF_DROP;
- if (IP_VS_FWD_METHOD(cp) != 0) {
- pr_err("shouldn't reach here, because the box is on the "
- "half connection in the tun/dr module.\n");
- }
+ if (IP_VS_FWD_METHOD(cp) != IP_VS_CONN_F_MASQ)
+ goto ignore_cp;
/* Ensure the checksum is correct */
if (!skb_csum_unnecessary(skb) && ip_vs_checksum_complete(skb, ihl)) {
@@ -882,6 +880,8 @@ static int handle_response_icmp(int af,
ip_vs_notrack(skb);
else
ip_vs_update_conntrack(skb, cp, 0);
+
+ignore_cp:
verdict = NF_ACCEPT;
out:
@@ -1242,8 +1242,11 @@ ip_vs_out(struct netns_ipvs *ipvs, unsig
*/
cp = pp->conn_out_get(ipvs, af, skb, &iph);
- if (likely(cp))
+ if (likely(cp)) {
+ if (IP_VS_FWD_METHOD(cp) != IP_VS_CONN_F_MASQ)
+ goto ignore_cp;
return handle_response(af, skb, pd, cp, &iph, hooknum);
+ }
if (sysctl_nat_icmp_send(ipvs) &&
(pp->protocol == IPPROTO_TCP ||
pp->protocol == IPPROTO_UDP ||
@@ -1285,9 +1288,15 @@ ip_vs_out(struct netns_ipvs *ipvs, unsig
}
}
}
+
+out:
IP_VS_DBG_PKT(12, af, pp, skb, iph.off,
"ip_vs_out: packet continues traversal as normal");
return NF_ACCEPT;
+
+ignore_cp:
+ __ip_vs_conn_put(cp);
+ goto out;
}
/*
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Anton Blanchard <[email protected]>
commit 64e756c55aa46fc18fd53e8f3598b73b528d8637 upstream.
>From POWER4 onwards, mfocrf() only places the specified CR field into
the destination GPR, and the rest of it is set to 0. The PowerPC AS
from version 3.0 now requires this behaviour.
The emulation code currently puts the entire CR into the destination GPR.
Fix it.
Fixes: 6888199f7fe5 ("[POWERPC] Emulate more instructions in software")
Signed-off-by: Anton Blanchard <[email protected]>
Acked-by: Naveen N. Rao <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/lib/sstep.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -969,6 +969,19 @@ int __kprobes analyse_instr(struct instr
#endif
case 19: /* mfcr */
+ if ((instr >> 20) & 1) {
+ imm = 0xf0000000UL;
+ for (sh = 0; sh < 8; ++sh) {
+ if (instr & (0x80000 >> sh)) {
+ regs->gpr[rd] = regs->ccr & imm;
+ break;
+ }
+ imm >>= 4;
+ }
+
+ goto instr_done;
+ }
+
regs->gpr[rd] = regs->ccr;
regs->gpr[rd] &= 0xffffffffUL;
goto instr_done;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Anton Blanchard <[email protected]>
commit 87c4b83e0fe234a1f0eed131ab6fa232036860d5 upstream.
The mcrf emulation code was using the CR field number directly as the shift
value, without taking into account that CR fields are numbered from 0-7 starting
at the high bits. That meant it was looking at the CR fields in the reverse
order.
Fixes: cf87c3f6b647 ("powerpc: Emulate icbi, mcrf and conditional-trap instructions")
Signed-off-by: Anton Blanchard <[email protected]>
Acked-by: Naveen N. Rao <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/lib/sstep.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -687,8 +687,10 @@ int __kprobes analyse_instr(struct instr
case 19:
switch ((instr >> 1) & 0x3ff) {
case 0: /* mcrf */
- rd = (instr >> 21) & 0x1c;
- ra = (instr >> 16) & 0x1c;
+ rd = 7 - ((instr >> 23) & 0x7);
+ ra = 7 - ((instr >> 18) & 0x7);
+ rd *= 4;
+ ra *= 4;
val = (regs->ccr >> ra) & 0xf;
regs->ccr = (regs->ccr & ~(0xfUL << rd)) | (val << rd);
goto instr_done;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mathias Nyman <[email protected]>
commit a54408d0a004757789863d74e29c2297edae0b4d upstream.
A uncleared PLC (port link change) bit will prevent furuther port event
interrupts for that port. Leaving it uncleared caused get_port_status()
to timeout after 20000ms while waiting to get the final port event
interrupt for resume -> U0 state change.
This is a targeted fix for a specific case where we get a port resume event
racing with xhci resume. The port event interrupt handler notices xHC is
not yet running and bails out early, leaving PLC uncleared.
The whole xhci port resuming needs more attention, but while working on it
it anyways makes sense to always ensure PLC is cleared in get_port_status
before setting a new link state and waiting for its completion.
Signed-off-by: Mathias Nyman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-hub.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -768,6 +768,9 @@ static u32 xhci_get_port_status(struct u
clear_bit(wIndex, &bus_state->resuming_ports);
set_bit(wIndex, &bus_state->rexit_ports);
+
+ xhci_test_and_clear_bit(xhci, port_array, wIndex,
+ PORT_PLC);
xhci_set_link_state(xhci, port_array, wIndex,
XDEV_U0);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Ellerman <[email protected]>
commit 01e6a61aceb82e13bec29502a8eb70d9574f97ad upstream.
Although it's not documented anywhere, there is an expectation that
atomic64_inc_not_zero() returns a result which fits in an int. This is
the behaviour implemented on all arches except powerpc.
This has caused at least one bug in practice, in the percpu-refcount
code, where the long result from our atomic64_inc_not_zero() was
truncated to an int leading to lost references and stuck systems. That
was worked around in that code in commit 966d2b04e070 ("percpu-refcount:
fix reference leak during percpu-atomic transition").
To the best of my grepping abilities there are no other callers
in-tree which truncate the value, but we should fix it anyway. Because
the breakage is subtle and potentially very harmful I'm also tagging
it for stable.
Code generation is largely unaffected because in most cases the
callers are just using the result for a test anyway. In particular the
case of fget() that was mentioned in commit a6cf7ed5119f
("powerpc/atomic: Implement atomic*_inc_not_zero") generates exactly
the same code.
Fixes: a6cf7ed5119f ("powerpc/atomic: Implement atomic*_inc_not_zero")
Noticed-by: Linus Torvalds <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/include/asm/atomic.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/powerpc/include/asm/atomic.h
+++ b/arch/powerpc/include/asm/atomic.h
@@ -460,7 +460,7 @@ static __inline__ int atomic64_add_unles
* Atomically increments @v by 1, so long as @v is non-zero.
* Returns non-zero if @v was non-zero, and zero otherwise.
*/
-static __inline__ long atomic64_inc_not_zero(atomic64_t *v)
+static __inline__ int atomic64_inc_not_zero(atomic64_t *v)
{
long t1, t2;
@@ -479,7 +479,7 @@ static __inline__ long atomic64_inc_not_
: "r" (&v->counter)
: "cc", "xer", "memory");
- return t1;
+ return t1 != 0;
}
#endif /* __powerpc64__ */
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Bellinger <[email protected]>
commit 138d351eefb727ab9e41a3dc5f112ceb4f6e59f2 upstream.
This patch re-introduces part of a long standing login workaround that
was recently dropped by:
commit 1c99de981f30b3e7868b8d20ce5479fa1c0fea46
Author: Nicholas Bellinger <[email protected]>
Date: Sun Apr 2 13:36:44 2017 -0700
iscsi-target: Drop work-around for legacy GlobalSAN initiator
Namely, the workaround for FirstBurstLength ended up being required by
Mellanox Flexboot PXE boot ROMs as reported by Robert.
So this patch re-adds the work-around for FirstBurstLength within
iscsi_check_proposer_for_optional_reply(), and makes the key optional
to respond when the initiator does not propose, nor respond to it.
Also as requested by Arun, this patch introduces a new TPG attribute
named 'login_keys_workaround' that controls the use of both the
FirstBurstLength workaround, as well as the two other existing
workarounds for gPXE iSCSI boot client.
By default, the workaround is enabled with login_keys_workaround=1,
since Mellanox FlexBoot requires it, and Arun has verified the Qlogic
MSFT initiator already proposes FirstBurstLength, so it's uneffected
by this re-adding this part of the original work-around.
Reported-by: Robert LeBlanc <[email protected]>
Cc: Robert LeBlanc <[email protected]>
Reviewed-by: Arun Easi <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/target/iscsi/iscsi_target_configfs.c | 2 +
drivers/target/iscsi/iscsi_target_nego.c | 6 ++-
drivers/target/iscsi/iscsi_target_parameters.c | 41 +++++++++++++++++--------
drivers/target/iscsi/iscsi_target_parameters.h | 2 -
drivers/target/iscsi/iscsi_target_tpg.c | 19 +++++++++++
drivers/target/iscsi/iscsi_target_tpg.h | 1
include/target/iscsi/iscsi_target_core.h | 9 +++++
7 files changed, 64 insertions(+), 16 deletions(-)
--- a/drivers/target/iscsi/iscsi_target_configfs.c
+++ b/drivers/target/iscsi/iscsi_target_configfs.c
@@ -868,6 +868,7 @@ DEF_TPG_ATTRIB(default_erl);
DEF_TPG_ATTRIB(t10_pi);
DEF_TPG_ATTRIB(fabric_prot_type);
DEF_TPG_ATTRIB(tpg_enabled_sendtargets);
+DEF_TPG_ATTRIB(login_keys_workaround);
static struct configfs_attribute *lio_target_tpg_attrib_attrs[] = {
&iscsi_tpg_attrib_attr_authentication,
@@ -883,6 +884,7 @@ static struct configfs_attribute *lio_ta
&iscsi_tpg_attrib_attr_t10_pi,
&iscsi_tpg_attrib_attr_fabric_prot_type,
&iscsi_tpg_attrib_attr_tpg_enabled_sendtargets,
+ &iscsi_tpg_attrib_attr_login_keys_workaround,
NULL,
};
--- a/drivers/target/iscsi/iscsi_target_nego.c
+++ b/drivers/target/iscsi/iscsi_target_nego.c
@@ -818,7 +818,8 @@ static int iscsi_target_handle_csg_zero(
SENDER_TARGET,
login->rsp_buf,
&login->rsp_length,
- conn->param_list);
+ conn->param_list,
+ conn->tpg->tpg_attrib.login_keys_workaround);
if (ret < 0)
return -1;
@@ -888,7 +889,8 @@ static int iscsi_target_handle_csg_one(s
SENDER_TARGET,
login->rsp_buf,
&login->rsp_length,
- conn->param_list);
+ conn->param_list,
+ conn->tpg->tpg_attrib.login_keys_workaround);
if (ret < 0) {
iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_INITIATOR_ERR,
ISCSI_LOGIN_STATUS_INIT_ERR);
--- a/drivers/target/iscsi/iscsi_target_parameters.c
+++ b/drivers/target/iscsi/iscsi_target_parameters.c
@@ -764,7 +764,8 @@ static int iscsi_check_for_auth_key(char
return 0;
}
-static void iscsi_check_proposer_for_optional_reply(struct iscsi_param *param)
+static void iscsi_check_proposer_for_optional_reply(struct iscsi_param *param,
+ bool keys_workaround)
{
if (IS_TYPE_BOOL_AND(param)) {
if (!strcmp(param->value, NO))
@@ -772,19 +773,31 @@ static void iscsi_check_proposer_for_opt
} else if (IS_TYPE_BOOL_OR(param)) {
if (!strcmp(param->value, YES))
SET_PSTATE_REPLY_OPTIONAL(param);
- /*
- * Required for gPXE iSCSI boot client
- */
- if (!strcmp(param->name, IMMEDIATEDATA))
- SET_PSTATE_REPLY_OPTIONAL(param);
+
+ if (keys_workaround) {
+ /*
+ * Required for gPXE iSCSI boot client
+ */
+ if (!strcmp(param->name, IMMEDIATEDATA))
+ SET_PSTATE_REPLY_OPTIONAL(param);
+ }
} else if (IS_TYPE_NUMBER(param)) {
if (!strcmp(param->name, MAXRECVDATASEGMENTLENGTH))
SET_PSTATE_REPLY_OPTIONAL(param);
- /*
- * Required for gPXE iSCSI boot client
- */
- if (!strcmp(param->name, MAXCONNECTIONS))
- SET_PSTATE_REPLY_OPTIONAL(param);
+
+ if (keys_workaround) {
+ /*
+ * Required for Mellanox Flexboot PXE boot ROM
+ */
+ if (!strcmp(param->name, FIRSTBURSTLENGTH))
+ SET_PSTATE_REPLY_OPTIONAL(param);
+
+ /*
+ * Required for gPXE iSCSI boot client
+ */
+ if (!strcmp(param->name, MAXCONNECTIONS))
+ SET_PSTATE_REPLY_OPTIONAL(param);
+ }
} else if (IS_PHASE_DECLARATIVE(param))
SET_PSTATE_REPLY_OPTIONAL(param);
}
@@ -1421,7 +1434,8 @@ int iscsi_encode_text_output(
u8 sender,
char *textbuf,
u32 *length,
- struct iscsi_param_list *param_list)
+ struct iscsi_param_list *param_list,
+ bool keys_workaround)
{
char *output_buf = NULL;
struct iscsi_extra_response *er;
@@ -1457,7 +1471,8 @@ int iscsi_encode_text_output(
*length += 1;
output_buf = textbuf + *length;
SET_PSTATE_PROPOSER(param);
- iscsi_check_proposer_for_optional_reply(param);
+ iscsi_check_proposer_for_optional_reply(param,
+ keys_workaround);
pr_debug("Sending key: %s=%s\n",
param->name, param->value);
}
--- a/drivers/target/iscsi/iscsi_target_parameters.h
+++ b/drivers/target/iscsi/iscsi_target_parameters.h
@@ -40,7 +40,7 @@ extern int iscsi_extract_key_value(char
extern int iscsi_update_param_value(struct iscsi_param *, char *);
extern int iscsi_decode_text_input(u8, u8, char *, u32, struct iscsi_conn *);
extern int iscsi_encode_text_output(u8, u8, char *, u32 *,
- struct iscsi_param_list *);
+ struct iscsi_param_list *, bool);
extern int iscsi_check_negotiated_keys(struct iscsi_param_list *);
extern void iscsi_set_connection_parameters(struct iscsi_conn_ops *,
struct iscsi_param_list *);
--- a/drivers/target/iscsi/iscsi_target_tpg.c
+++ b/drivers/target/iscsi/iscsi_target_tpg.c
@@ -227,6 +227,7 @@ static void iscsit_set_default_tpg_attri
a->t10_pi = TA_DEFAULT_T10_PI;
a->fabric_prot_type = TA_DEFAULT_FABRIC_PROT_TYPE;
a->tpg_enabled_sendtargets = TA_DEFAULT_TPG_ENABLED_SENDTARGETS;
+ a->login_keys_workaround = TA_DEFAULT_LOGIN_KEYS_WORKAROUND;
}
int iscsit_tpg_add_portal_group(struct iscsi_tiqn *tiqn, struct iscsi_portal_group *tpg)
@@ -899,3 +900,21 @@ int iscsit_ta_tpg_enabled_sendtargets(
return 0;
}
+
+int iscsit_ta_login_keys_workaround(
+ struct iscsi_portal_group *tpg,
+ u32 flag)
+{
+ struct iscsi_tpg_attrib *a = &tpg->tpg_attrib;
+
+ if ((flag != 0) && (flag != 1)) {
+ pr_err("Illegal value %d\n", flag);
+ return -EINVAL;
+ }
+
+ a->login_keys_workaround = flag;
+ pr_debug("iSCSI_TPG[%hu] - TPG enabled bit for login keys workaround: %s ",
+ tpg->tpgt, (a->login_keys_workaround) ? "ON" : "OFF");
+
+ return 0;
+}
--- a/drivers/target/iscsi/iscsi_target_tpg.h
+++ b/drivers/target/iscsi/iscsi_target_tpg.h
@@ -39,5 +39,6 @@ extern int iscsit_ta_default_erl(struct
extern int iscsit_ta_t10_pi(struct iscsi_portal_group *, u32);
extern int iscsit_ta_fabric_prot_type(struct iscsi_portal_group *, u32);
extern int iscsit_ta_tpg_enabled_sendtargets(struct iscsi_portal_group *, u32);
+extern int iscsit_ta_login_keys_workaround(struct iscsi_portal_group *, u32);
#endif /* ISCSI_TARGET_TPG_H */
--- a/include/target/iscsi/iscsi_target_core.h
+++ b/include/target/iscsi/iscsi_target_core.h
@@ -64,6 +64,14 @@
#define TA_DEFAULT_FABRIC_PROT_TYPE 0
/* TPG status needs to be enabled to return sendtargets discovery endpoint info */
#define TA_DEFAULT_TPG_ENABLED_SENDTARGETS 1
+/*
+ * Used to control the sending of keys with optional to respond state bit,
+ * as a workaround for non RFC compliant initiators,that do not propose,
+ * nor respond to specific keys required for login to complete.
+ *
+ * See iscsi_check_proposer_for_optional_reply() for more details.
+ */
+#define TA_DEFAULT_LOGIN_KEYS_WORKAROUND 1
#define ISCSI_IOV_DATA_BUFFER 5
@@ -765,6 +773,7 @@ struct iscsi_tpg_attrib {
u8 t10_pi;
u32 fabric_prot_type;
u32 tpg_enabled_sendtargets;
+ u32 login_keys_workaround;
struct iscsi_portal_group *tpg;
};
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maurizio Lombardi <[email protected]>
commit 62e62ffd95539b9220894a7900a619e0f3ef4756 upstream.
The enclosure_add_device() function should fail if it can't create the
relevant sysfs links.
Signed-off-by: Maurizio Lombardi <[email protected]>
Tested-by: Douglas Miller <[email protected]>
Acked-by: James Bottomley <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/misc/enclosure.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
--- a/drivers/misc/enclosure.c
+++ b/drivers/misc/enclosure.c
@@ -375,6 +375,7 @@ int enclosure_add_device(struct enclosur
struct device *dev)
{
struct enclosure_component *cdev;
+ int err;
if (!edev || component >= edev->components)
return -EINVAL;
@@ -384,12 +385,17 @@ int enclosure_add_device(struct enclosur
if (cdev->dev == dev)
return -EEXIST;
- if (cdev->dev)
+ if (cdev->dev) {
enclosure_remove_links(cdev);
-
- put_device(cdev->dev);
+ put_device(cdev->dev);
+ }
cdev->dev = get_device(dev);
- return enclosure_add_links(cdev);
+ err = enclosure_add_links(cdev);
+ if (err) {
+ put_device(cdev->dev);
+ cdev->dev = NULL;
+ }
+ return err;
}
EXPORT_SYMBOL_GPL(enclosure_add_device);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mateusz Jurczyk <[email protected]>
commit f6a5885fc4d68e7f25ffb42b9d8d80aebb3bacbb upstream.
Verify that the caller-provided sockaddr structure is large enough to
contain the sa_family field, before accessing it in bind() handlers of the
AF_NFC socket. Since the syscall doesn't enforce a minimum size of the
corresponding memory region, very short sockaddrs (zero or one byte long)
result in operating on uninitialized memory while referencing .sa_family.
Signed-off-by: Mateusz Jurczyk <[email protected]>
Signed-off-by: Samuel Ortiz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/nfc/llcp_sock.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/net/nfc/llcp_sock.c
+++ b/net/nfc/llcp_sock.c
@@ -76,7 +76,8 @@ static int llcp_sock_bind(struct socket
struct sockaddr_nfc_llcp llcp_addr;
int len, ret = 0;
- if (!addr || addr->sa_family != AF_NFC)
+ if (!addr || alen < offsetofend(struct sockaddr, sa_family) ||
+ addr->sa_family != AF_NFC)
return -EINVAL;
pr_debug("sk %p addr %p family %d\n", sk, addr, addr->sa_family);
@@ -150,7 +151,8 @@ static int llcp_raw_sock_bind(struct soc
struct sockaddr_nfc_llcp llcp_addr;
int len, ret = 0;
- if (!addr || addr->sa_family != AF_NFC)
+ if (!addr || alen < offsetofend(struct sockaddr, sa_family) ||
+ addr->sa_family != AF_NFC)
return -EINVAL;
pr_debug("sk %p addr %p family %d\n", sk, addr, addr->sa_family);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krzysztof Kozlowski <[email protected]>
commit b556b15dc04e9b9b98790f04c21acf5e24f994b2 upstream.
of_genpd_del_provider() iterates over list of domain provides and
removes matching element thus it has to use safe version of list
iteration.
Fixes: aa42240ab254 (PM / Domains: Add generic OF-based PM domain look-up)
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/base/power/domain.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -1642,10 +1642,10 @@ EXPORT_SYMBOL_GPL(__of_genpd_add_provide
*/
void of_genpd_del_provider(struct device_node *np)
{
- struct of_genpd_provider *cp;
+ struct of_genpd_provider *cp, *tmp;
mutex_lock(&of_genpd_mutex);
- list_for_each_entry(cp, &of_genpd_providers, link) {
+ list_for_each_entry_safe(cp, tmp, &of_genpd_providers, link) {
if (cp->node == np) {
list_del(&cp->link);
of_node_put(cp->node);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adrian Hunter <[email protected]>
commit 22c06892332d8916115525145b78e606e9cc6492 upstream.
Move decoder error setting into one condition.
Cc'ed to stable because later fixes depend on it.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/intel-pt-decoder/intel-pt-decoder.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--- a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
+++ b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
@@ -2096,15 +2096,18 @@ const struct intel_pt_state *intel_pt_de
}
} while (err == -ENOLINK);
- decoder->state.err = err ? intel_pt_ext_err(err) : 0;
+ if (err) {
+ decoder->state.err = intel_pt_ext_err(err);
+ decoder->state.from_ip = decoder->ip;
+ } else {
+ decoder->state.err = 0;
+ }
+
decoder->state.timestamp = decoder->timestamp;
decoder->state.est_timestamp = intel_pt_est_timestamp(decoder);
decoder->state.cr3 = decoder->cr3;
decoder->state.tot_insn_cnt = decoder->tot_insn_cnt;
- if (err)
- decoder->state.from_ip = decoder->ip;
-
return &decoder->state;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adrian Hunter <[email protected]>
commit ad7167a8cd174ba7d8c0d0ed8d8410521206d104 upstream.
A value of zero is used to indicate that there is no IP. Ensure the
value is zero when the state is INTEL_PT_STATE_NO_IP.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/intel-pt-decoder/intel-pt-decoder.c | 1 +
1 file changed, 1 insertion(+)
--- a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
+++ b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
@@ -2083,6 +2083,7 @@ const struct intel_pt_state *intel_pt_de
break;
case INTEL_PT_STATE_NO_IP:
decoder->last_ip = 0;
+ decoder->ip = 0;
/* Fall through */
case INTEL_PT_STATE_ERR_RESYNC:
err = intel_pt_sync_ip(decoder);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adrian Hunter <[email protected]>
commit 3f04d98e972b59706bd43d6cc75efac91f8fba50 upstream.
The decoder uses its current timestamp in samples. Usually that is a
timestamp that has already passed, but in some cases it is a timestamp
for a branch that the decoder is walking towards, and consequently
hasn't reached. Improve that situation by using the pkt_state to
determine when to use the current or previous timestamp.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/intel-pt-decoder/intel-pt-decoder.c | 34 ++++++++++++++++++--
1 file changed, 31 insertions(+), 3 deletions(-)
--- a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
+++ b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
@@ -64,6 +64,25 @@ enum intel_pt_pkt_state {
INTEL_PT_STATE_FUP_NO_TIP,
};
+static inline bool intel_pt_sample_time(enum intel_pt_pkt_state pkt_state)
+{
+ switch (pkt_state) {
+ case INTEL_PT_STATE_NO_PSB:
+ case INTEL_PT_STATE_NO_IP:
+ case INTEL_PT_STATE_ERR_RESYNC:
+ case INTEL_PT_STATE_IN_SYNC:
+ case INTEL_PT_STATE_TNT:
+ return true;
+ case INTEL_PT_STATE_TIP:
+ case INTEL_PT_STATE_TIP_PGD:
+ case INTEL_PT_STATE_FUP:
+ case INTEL_PT_STATE_FUP_NO_TIP:
+ return false;
+ default:
+ return true;
+ };
+}
+
#ifdef INTEL_PT_STRICT
#define INTEL_PT_STATE_ERR1 INTEL_PT_STATE_NO_PSB
#define INTEL_PT_STATE_ERR2 INTEL_PT_STATE_NO_PSB
@@ -98,6 +117,7 @@ struct intel_pt_decoder {
uint64_t timestamp;
uint64_t tsc_timestamp;
uint64_t ref_timestamp;
+ uint64_t sample_timestamp;
uint64_t ret_addr;
uint64_t ctc_timestamp;
uint64_t ctc_delta;
@@ -140,6 +160,7 @@ struct intel_pt_decoder {
unsigned int fup_tx_flags;
unsigned int tx_flags;
uint64_t timestamp_insn_cnt;
+ uint64_t sample_insn_cnt;
uint64_t stuck_ip;
int no_progress;
int stuck_ip_prd;
@@ -896,6 +917,7 @@ static int intel_pt_walk_insn(struct int
decoder->tot_insn_cnt += insn_cnt;
decoder->timestamp_insn_cnt += insn_cnt;
+ decoder->sample_insn_cnt += insn_cnt;
decoder->period_insn_cnt += insn_cnt;
if (err) {
@@ -2035,7 +2057,7 @@ static int intel_pt_sync(struct intel_pt
static uint64_t intel_pt_est_timestamp(struct intel_pt_decoder *decoder)
{
- uint64_t est = decoder->timestamp_insn_cnt << 1;
+ uint64_t est = decoder->sample_insn_cnt << 1;
if (!decoder->cbr || !decoder->max_non_turbo_ratio)
goto out;
@@ -2043,7 +2065,7 @@ static uint64_t intel_pt_est_timestamp(s
est *= decoder->max_non_turbo_ratio;
est /= decoder->cbr;
out:
- return decoder->timestamp + est;
+ return decoder->sample_timestamp + est;
}
const struct intel_pt_state *intel_pt_decode(struct intel_pt_decoder *decoder)
@@ -2099,11 +2121,17 @@ const struct intel_pt_state *intel_pt_de
if (err) {
decoder->state.err = intel_pt_ext_err(err);
decoder->state.from_ip = decoder->ip;
+ decoder->sample_timestamp = decoder->timestamp;
+ decoder->sample_insn_cnt = decoder->timestamp_insn_cnt;
} else {
decoder->state.err = 0;
+ if (intel_pt_sample_time(decoder->pkt_state)) {
+ decoder->sample_timestamp = decoder->timestamp;
+ decoder->sample_insn_cnt = decoder->timestamp_insn_cnt;
+ }
}
- decoder->state.timestamp = decoder->timestamp;
+ decoder->state.timestamp = decoder->sample_timestamp;
decoder->state.est_timestamp = intel_pt_est_timestamp(decoder);
decoder->state.cr3 = decoder->cr3;
decoder->state.tot_insn_cnt = decoder->tot_insn_cnt;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adrian Hunter <[email protected]>
commit 12b7080609097753fd8198cc1daf589be3ec1cca upstream.
The return compression stack must be cleared whenever there is a PSB. Fix
one case where that was not happening.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/intel-pt-decoder/intel-pt-decoder.c | 1 +
1 file changed, 1 insertion(+)
--- a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
+++ b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
@@ -1898,6 +1898,7 @@ static int intel_pt_walk_to_ip(struct in
break;
case INTEL_PT_PSB:
+ intel_pt_clear_stack(&decoder->stack);
err = intel_pt_walk_psb(decoder);
if (err)
return err;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Satish Babu Patakokila <[email protected]>
commit 01b8cedfd0422326caae308641dcadaa85e0ca72 upstream.
Currently compress driver hardcodes direction as playback to get
substream from the stream. This results in getting the incorrect
substream for compressed capture usecase.
To fix this, remove the hardcoding and derive substream based on
the stream direction.
Signed-off-by: Satish Babu Patakokila <[email protected]>
Signed-off-by: Banajit Goswami <[email protected]>
Acked-By: Vinod Koul <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/soc-compress.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/sound/soc/soc-compress.c
+++ b/sound/soc/soc-compress.c
@@ -68,7 +68,8 @@ out:
static int soc_compr_open_fe(struct snd_compr_stream *cstream)
{
struct snd_soc_pcm_runtime *fe = cstream->private_data;
- struct snd_pcm_substream *fe_substream = fe->pcm->streams[0].substream;
+ struct snd_pcm_substream *fe_substream =
+ fe->pcm->streams[cstream->direction].substream;
struct snd_soc_platform *platform = fe->platform;
struct snd_soc_dpcm *dpcm;
struct snd_soc_dapm_widget_list *list;
@@ -412,7 +413,8 @@ static int soc_compr_set_params_fe(struc
struct snd_compr_params *params)
{
struct snd_soc_pcm_runtime *fe = cstream->private_data;
- struct snd_pcm_substream *fe_substream = fe->pcm->streams[0].substream;
+ struct snd_pcm_substream *fe_substream =
+ fe->pcm->streams[cstream->direction].substream;
struct snd_soc_platform *platform = fe->platform;
int ret = 0, stream;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason A. Donenfeld <[email protected]>
commit 329d82309824ff1082dc4a91a5bbed8c3bec1580 upstream.
This file is filled with complex cryptography. Thus, the comparisons of
MACs and secret keys and curve points and so forth should not add timing
attacks, which could either result in a direct forgery, or, given the
complexity, some other type of attack.
Signed-off-by: Jason A. Donenfeld <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/bluetooth/smp.c | 35 ++++++++++++++++++-----------------
1 file changed, 18 insertions(+), 17 deletions(-)
--- a/net/bluetooth/smp.c
+++ b/net/bluetooth/smp.c
@@ -23,6 +23,7 @@
#include <linux/debugfs.h>
#include <linux/crypto.h>
#include <linux/scatterlist.h>
+#include <crypto/algapi.h>
#include <crypto/b128ops.h>
#include <net/bluetooth/bluetooth.h>
@@ -524,7 +525,7 @@ bool smp_irk_matches(struct hci_dev *hde
if (err)
return false;
- return !memcmp(bdaddr->b, hash, 3);
+ return !crypto_memneq(bdaddr->b, hash, 3);
}
int smp_generate_rpa(struct hci_dev *hdev, const u8 irk[16], bdaddr_t *rpa)
@@ -577,7 +578,7 @@ int smp_generate_oob(struct hci_dev *hde
/* This is unlikely, but we need to check that
* we didn't accidentially generate a debug key.
*/
- if (memcmp(smp->local_sk, debug_sk, 32))
+ if (crypto_memneq(smp->local_sk, debug_sk, 32))
break;
}
smp->debug_key = false;
@@ -991,7 +992,7 @@ static u8 smp_random(struct smp_chan *sm
if (ret)
return SMP_UNSPECIFIED;
- if (memcmp(smp->pcnf, confirm, sizeof(smp->pcnf)) != 0) {
+ if (crypto_memneq(smp->pcnf, confirm, sizeof(smp->pcnf))) {
BT_ERR("Pairing failed (confirmation values mismatch)");
return SMP_CONFIRM_FAILED;
}
@@ -1491,7 +1492,7 @@ static u8 sc_passkey_round(struct smp_ch
smp->rrnd, r, cfm))
return SMP_UNSPECIFIED;
- if (memcmp(smp->pcnf, cfm, 16))
+ if (crypto_memneq(smp->pcnf, cfm, 16))
return SMP_CONFIRM_FAILED;
smp->passkey_round++;
@@ -1875,7 +1876,7 @@ static u8 sc_send_public_key(struct smp_
/* This is unlikely, but we need to check that
* we didn't accidentially generate a debug key.
*/
- if (memcmp(smp->local_sk, debug_sk, 32))
+ if (crypto_memneq(smp->local_sk, debug_sk, 32))
break;
}
}
@@ -2140,7 +2141,7 @@ static u8 smp_cmd_pairing_random(struct
if (err)
return SMP_UNSPECIFIED;
- if (memcmp(smp->pcnf, cfm, 16))
+ if (crypto_memneq(smp->pcnf, cfm, 16))
return SMP_CONFIRM_FAILED;
} else {
smp_send_cmd(conn, SMP_CMD_PAIRING_RANDOM, sizeof(smp->prnd),
@@ -2621,7 +2622,7 @@ static int smp_cmd_public_key(struct l2c
if (err)
return SMP_UNSPECIFIED;
- if (memcmp(cfm.confirm_val, smp->pcnf, 16))
+ if (crypto_memneq(cfm.confirm_val, smp->pcnf, 16))
return SMP_CONFIRM_FAILED;
}
@@ -2654,7 +2655,7 @@ static int smp_cmd_public_key(struct l2c
else
hcon->pending_sec_level = BT_SECURITY_FIPS;
- if (!memcmp(debug_pk, smp->remote_pk, 64))
+ if (!crypto_memneq(debug_pk, smp->remote_pk, 64))
set_bit(SMP_FLAG_DEBUG_KEY, &smp->flags);
if (smp->method == DSP_PASSKEY) {
@@ -2753,7 +2754,7 @@ static int smp_cmd_dhkey_check(struct l2
if (err)
return SMP_UNSPECIFIED;
- if (memcmp(check->e, e, 16))
+ if (crypto_memneq(check->e, e, 16))
return SMP_DHKEY_CHECK_FAILED;
if (!hcon->out) {
@@ -3463,7 +3464,7 @@ static int __init test_ah(struct crypto_
if (err)
return err;
- if (memcmp(res, exp, 3))
+ if (crypto_memneq(res, exp, 3))
return -EINVAL;
return 0;
@@ -3493,7 +3494,7 @@ static int __init test_c1(struct crypto_
if (err)
return err;
- if (memcmp(res, exp, 16))
+ if (crypto_memneq(res, exp, 16))
return -EINVAL;
return 0;
@@ -3518,7 +3519,7 @@ static int __init test_s1(struct crypto_
if (err)
return err;
- if (memcmp(res, exp, 16))
+ if (crypto_memneq(res, exp, 16))
return -EINVAL;
return 0;
@@ -3550,7 +3551,7 @@ static int __init test_f4(struct crypto_
if (err)
return err;
- if (memcmp(res, exp, 16))
+ if (crypto_memneq(res, exp, 16))
return -EINVAL;
return 0;
@@ -3584,10 +3585,10 @@ static int __init test_f5(struct crypto_
if (err)
return err;
- if (memcmp(mackey, exp_mackey, 16))
+ if (crypto_memneq(mackey, exp_mackey, 16))
return -EINVAL;
- if (memcmp(ltk, exp_ltk, 16))
+ if (crypto_memneq(ltk, exp_ltk, 16))
return -EINVAL;
return 0;
@@ -3620,7 +3621,7 @@ static int __init test_f6(struct crypto_
if (err)
return err;
- if (memcmp(res, exp, 16))
+ if (crypto_memneq(res, exp, 16))
return -EINVAL;
return 0;
@@ -3674,7 +3675,7 @@ static int __init test_h6(struct crypto_
if (err)
return err;
- if (memcmp(res, exp, 16))
+ if (crypto_memneq(res, exp, 16))
return -EINVAL;
return 0;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit 4a4274bf2dbbd1c7a45be0c89a1687c9d2eef4a0 upstream.
In the stable linux-3.16 branch, I ran into a warning in the
wlcore driver:
drivers/net/wireless/ti/wlcore/spi.c: In function 'wl12xx_spi_raw_write':
drivers/net/wireless/ti/wlcore/spi.c:315:1: error: the frame size of 12848 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
Newer kernels no longer show the warning, but the bug is still there,
as the allocation is based on the CPU page size rather than the
actual capabilities of the hardware.
This replaces the PAGE_SIZE macro with the SZ_4K macro, i.e. 4096 bytes
per buffer.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ti/wlcore/spi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/wireless/ti/wlcore/spi.c
+++ b/drivers/net/wireless/ti/wlcore/spi.c
@@ -71,7 +71,7 @@
* only support SPI for 12xx - this code should be reworked when 18xx
* support is introduced
*/
-#define SPI_AGGR_BUFFER_SIZE (4 * PAGE_SIZE)
+#define SPI_AGGR_BUFFER_SIZE (4 * SZ_4K)
/* Maximum number of SPI write chunks */
#define WSPI_MAX_NUM_OF_CHUNKS \
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 0cbe40112f42cf5e008f9127f6cd5952ba3946c7 upstream.
This specifically fixes resource leaks in the registration error paths.
Device-managed resources is a bad fit for this driver as devices can be
registered from the n_nci line discipline. Firstly, a tty may not even
have a corresponding device (should it be part of a Unix98 pty)
something which would lead to a NULL-pointer dereference when
registering resources.
Secondly, if the tty has a class device, its lifetime exceeds that of
the line discipline, which means that resources would leak every time
the line discipline is closed (or if registration fails).
Currently, the devres interface was only being used to request a reset
gpio despite the fact that it was already explicitly freed in
nfcmrvl_nci_unregister_dev() (along with the private data), something
which also prevented the resource leak at close.
Note that the driver treats gpio number 0 as invalid despite it being
perfectly valid. This will be addressed in a follow-up patch.
Fixes: b2fe288eac72 ("NFC: nfcmrvl: free reset gpio")
Fixes: 4a2b947f56b3 ("NFC: nfcmrvl: add chip reset management")
Cc: Vincent Cuissard <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Samuel Ortiz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nfc/nfcmrvl/main.c | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
--- a/drivers/nfc/nfcmrvl/main.c
+++ b/drivers/nfc/nfcmrvl/main.c
@@ -124,12 +124,13 @@ struct nfcmrvl_private *nfcmrvl_nci_regi
memcpy(&priv->config, pdata, sizeof(*pdata));
if (priv->config.reset_n_io) {
- rc = devm_gpio_request_one(dev,
- priv->config.reset_n_io,
- GPIOF_OUT_INIT_LOW,
- "nfcmrvl_reset_n");
- if (rc < 0)
+ rc = gpio_request_one(priv->config.reset_n_io,
+ GPIOF_OUT_INIT_LOW,
+ "nfcmrvl_reset_n");
+ if (rc < 0) {
+ priv->config.reset_n_io = 0;
nfc_err(dev, "failed to request reset_n io\n");
+ }
}
if (phy == NFCMRVL_PHY_SPI) {
@@ -154,7 +155,7 @@ struct nfcmrvl_private *nfcmrvl_nci_regi
if (!priv->ndev) {
nfc_err(dev, "nci_allocate_device failed\n");
rc = -ENOMEM;
- goto error;
+ goto error_free_gpio;
}
nci_set_drvdata(priv->ndev, priv);
@@ -179,7 +180,9 @@ struct nfcmrvl_private *nfcmrvl_nci_regi
error_free_dev:
nci_free_device(priv->ndev);
-error:
+error_free_gpio:
+ if (priv->config.reset_n_io)
+ gpio_free(priv->config.reset_n_io);
kfree(priv);
return ERR_PTR(rc);
}
@@ -195,7 +198,7 @@ void nfcmrvl_nci_unregister_dev(struct n
nfcmrvl_fw_dnld_deinit(priv);
if (priv->config.reset_n_io)
- devm_gpio_free(priv->dev, priv->config.reset_n_io);
+ gpio_free(priv->config.reset_n_io);
nci_unregister_device(ndev);
nci_free_device(ndev);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 15e0c59f1535926a939d1df66d6edcf997d7c1b9 upstream.
Make sure to check the tty-device pointer before trying to access the
parent device to avoid dereferencing a NULL-pointer when the tty is one
end of a Unix98 pty.
Fixes: e097dc624f78 ("NFC: nfcmrvl: add UART driver")
Cc: Vincent Cuissard <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Samuel Ortiz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nfc/nfcmrvl/uart.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/nfc/nfcmrvl/uart.c
+++ b/drivers/nfc/nfcmrvl/uart.c
@@ -109,6 +109,7 @@ static int nfcmrvl_nci_uart_open(struct
struct nfcmrvl_private *priv;
struct nfcmrvl_platform_data *pdata = NULL;
struct nfcmrvl_platform_data config;
+ struct device *dev = nu->tty->dev;
/*
* Platform data cannot be used here since usually it is already used
@@ -116,9 +117,8 @@ static int nfcmrvl_nci_uart_open(struct
* and check if DT entries were added.
*/
- if (nu->tty->dev->parent && nu->tty->dev->parent->of_node)
- if (nfcmrvl_uart_parse_dt(nu->tty->dev->parent->of_node,
- &config) == 0)
+ if (dev && dev->parent && dev->parent->of_node)
+ if (nfcmrvl_uart_parse_dt(dev->parent->of_node, &config) == 0)
pdata = &config;
if (!pdata) {
@@ -131,7 +131,7 @@ static int nfcmrvl_nci_uart_open(struct
}
priv = nfcmrvl_nci_register_dev(NFCMRVL_PHY_UART, nu, &uart_ops,
- nu->tty->dev, pdata);
+ dev, pdata);
if (IS_ERR(priv))
return PTR_ERR(priv);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mateusz Jurczyk <[email protected]>
commit 608c4adfcabab220142ee335a2a003ccd1c0b25b upstream.
Fix the sockaddr length verification in the connect() handler of NFC/LLCP
sockets, to compare against the size of the actual structure expected on
input (sockaddr_nfc_llcp) instead of its shorter version (sockaddr_nfc).
Both structures are defined in include/uapi/linux/nfc.h. The fields
specific to the _llcp extended struct are as follows:
276 __u8 dsap; /* Destination SAP, if known */
277 __u8 ssap; /* Source SAP to be bound to */
278 char service_name[NFC_LLCP_MAX_SERVICE_NAME]; /* Service name URI */;
279 size_t service_name_len;
If the caller doesn't provide a sufficiently long sockaddr buffer, these
fields remain uninitialized (and they currently originate from the stack
frame of the top-level sys_connect handler). They are then copied by
llcp_sock_connect() into internal storage (nfc_llcp_sock structure), and
could be subsequently read back through the user-mode getsockname()
function (handled by llcp_sock_getname()). This would result in the
disclosure of up to ~70 uninitialized bytes from the kernel stack to
user-mode clients capable of creating AFC_NFC sockets.
Signed-off-by: Mateusz Jurczyk <[email protected]>
Acked-by: Kees Cook <[email protected]>
Signed-off-by: Samuel Ortiz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/nfc/llcp_sock.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/net/nfc/llcp_sock.c
+++ b/net/nfc/llcp_sock.c
@@ -655,8 +655,7 @@ static int llcp_sock_connect(struct sock
pr_debug("sock %p sk %p flags 0x%x\n", sock, sk, flags);
- if (!addr || len < sizeof(struct sockaddr_nfc) ||
- addr->sa_family != AF_NFC)
+ if (!addr || len < sizeof(*addr) || addr->sa_family != AF_NFC)
return -EINVAL;
if (addr->service_name_len == 0 && addr->dsap == 0)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 45dd39b974f6632222dd5cdcbea7358a077ab0b0 upstream.
The nci-device was never deregistered in the event that
fw-initialisation failed.
Fix this by moving the firmware initialisation before device
registration since the firmware work queue should be available before
registering.
Note that this depends on a recent fix that moved device-name
initialisation back to to nci_allocate_device() as the
firmware-workqueue name is now derived from the nfc-device name.
Fixes: 3194c6870158 ("NFC: nfcmrvl: add firmware download support")
Cc: Vincent Cuissard <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Samuel Ortiz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nfc/nfcmrvl/main.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
--- a/drivers/nfc/nfcmrvl/main.c
+++ b/drivers/nfc/nfcmrvl/main.c
@@ -158,26 +158,28 @@ struct nfcmrvl_private *nfcmrvl_nci_regi
goto error_free_gpio;
}
+ rc = nfcmrvl_fw_dnld_init(priv);
+ if (rc) {
+ nfc_err(dev, "failed to initialize FW download %d\n", rc);
+ goto error_free_dev;
+ }
+
nci_set_drvdata(priv->ndev, priv);
rc = nci_register_device(priv->ndev);
if (rc) {
nfc_err(dev, "nci_register_device failed %d\n", rc);
- goto error_free_dev;
+ goto error_fw_dnld_deinit;
}
/* Ensure that controller is powered off */
nfcmrvl_chip_halt(priv);
- rc = nfcmrvl_fw_dnld_init(priv);
- if (rc) {
- nfc_err(dev, "failed to initialize FW download %d\n", rc);
- goto error_free_dev;
- }
-
nfc_info(dev, "registered with nci successfully\n");
return priv;
+error_fw_dnld_deinit:
+ nfcmrvl_fw_dnld_deinit(priv);
error_free_dev:
nci_free_device(priv->ndev);
error_free_gpio:
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Linus Torvalds <[email protected]>
commit bd664f6b3e376a8ef4990f87d08271cc2d01ba9a upstream.
I made the mistake of upgrading my desktop to the new Fedora 26 that
comes with gcc-7.1.1.
There's nothing wrong per se that I've noticed, but I now have 1500
lines of warnings, mostly from the new format-truncation warning
triggering all over the tree.
We use 'snprintf()' and friends in a lot of places, and often know that
the numbers are fairly small (ie a controller index or similar), but gcc
doesn't know that, and sees an 'int', and thinks that it could be some
huge number. And then complains when our buffers are not able to fit
the name for the ten millionth controller.
These warnings aren't necessarily bad per se, and we probably want to
look through them subsystem by subsystem, but at least during the merge
window they just mean that I can't even see if somebody is introducing
any *real* problems when I pull.
So warnings disabled for now.
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Makefile | 3 +++
1 file changed, 3 insertions(+)
--- a/Makefile
+++ b/Makefile
@@ -619,6 +619,9 @@ include arch/$(SRCARCH)/Makefile
KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks,)
KBUILD_CFLAGS += $(call cc-disable-warning,maybe-uninitialized,)
KBUILD_CFLAGS += $(call cc-disable-warning,frame-address,)
+KBUILD_CFLAGS += $(call cc-disable-warning, format-truncation)
+KBUILD_CFLAGS += $(call cc-disable-warning, format-overflow)
+KBUILD_CFLAGS += $(call cc-disable-warning, int-in-bool-context)
ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
KBUILD_CFLAGS += -Os
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit e5834ac22948169bbd7c45996d8d4905edd20f5e upstream.
Use the nfc- rather than phy-device in firmware-management code that
needs a valid struct device.
This specifically fixes a NULL-pointer dereference in
nfcmrvl_fw_dnld_init() during registration when the underlying tty is
one end of a Unix98 pty.
Note that the driver still uses the phy device for any debugging, which
is fine for now.
Fixes: 3194c6870158 ("NFC: nfcmrvl: add firmware download support")
Cc: Vincent Cuissard <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Samuel Ortiz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nfc/nfcmrvl/fw_dnld.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/drivers/nfc/nfcmrvl/fw_dnld.c
+++ b/drivers/nfc/nfcmrvl/fw_dnld.c
@@ -459,7 +459,7 @@ int nfcmrvl_fw_dnld_init(struct nfcmrvl_
INIT_WORK(&priv->fw_dnld.rx_work, fw_dnld_rx_work);
snprintf(name, sizeof(name), "%s_nfcmrvl_fw_dnld_rx_wq",
- dev_name(priv->dev));
+ dev_name(&priv->ndev->nfc_dev->dev));
priv->fw_dnld.rx_wq = create_singlethread_workqueue(name);
if (!priv->fw_dnld.rx_wq)
return -ENOMEM;
@@ -496,6 +496,7 @@ int nfcmrvl_fw_dnld_start(struct nci_dev
{
struct nfcmrvl_private *priv = nci_get_drvdata(ndev);
struct nfcmrvl_fw_dnld *fw_dnld = &priv->fw_dnld;
+ int res;
if (!priv->support_fw_dnld)
return -ENOTSUPP;
@@ -511,7 +512,9 @@ int nfcmrvl_fw_dnld_start(struct nci_dev
*/
/* Retrieve FW binary */
- if (request_firmware(&fw_dnld->fw, firmware_name, priv->dev) < 0) {
+ res = request_firmware(&fw_dnld->fw, firmware_name,
+ &ndev->nfc_dev->dev);
+ if (res < 0) {
nfc_err(priv->dev, "failed to retrieve FW %s", firmware_name);
return -ENOENT;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 20777bc57c346b6994f465e0d8261a7fbf213a09 upstream.
Commit 7eda8b8e9677 ("NFC: Use IDR library to assing NFC devices IDs")
moved device-id allocation and struct-device initialisation from
nfc_allocate_device() to nfc_register_device().
This broke just about every nfc-device-registration error path, which
continue to call nfc_free_device() that tries to put the device
reference of the now uninitialised (but zeroed) struct device:
kobject: '(null)' (ce316420): is not initialized, yet kobject_put() is being called.
The late struct-device initialisation also meant that various work
queues whose names are derived from the nfc device name were also
misnamed:
421 root 0 SW< [(null)_nci_cmd_]
422 root 0 SW< [(null)_nci_rx_w]
423 root 0 SW< [(null)_nci_tx_w]
Move the id-allocation and struct-device initialisation back to
nfc_allocate_device() and fix up the single call site which did not use
nfc_free_device() in its error path.
Fixes: 7eda8b8e9677 ("NFC: Use IDR library to assing NFC devices IDs")
Cc: Samuel Ortiz <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Samuel Ortiz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/nfc/core.c | 31 ++++++++++++++++++-------------
net/nfc/nci/core.c | 3 +--
2 files changed, 19 insertions(+), 15 deletions(-)
--- a/net/nfc/core.c
+++ b/net/nfc/core.c
@@ -969,6 +969,8 @@ static void nfc_release(struct device *d
kfree(se);
}
+ ida_simple_remove(&nfc_index_ida, dev->idx);
+
kfree(dev);
}
@@ -1043,6 +1045,7 @@ struct nfc_dev *nfc_allocate_device(stru
int tx_headroom, int tx_tailroom)
{
struct nfc_dev *dev;
+ int rc;
if (!ops->start_poll || !ops->stop_poll || !ops->activate_target ||
!ops->deactivate_target || !ops->im_transceive)
@@ -1055,6 +1058,15 @@ struct nfc_dev *nfc_allocate_device(stru
if (!dev)
return NULL;
+ rc = ida_simple_get(&nfc_index_ida, 0, 0, GFP_KERNEL);
+ if (rc < 0)
+ goto err_free_dev;
+ dev->idx = rc;
+
+ dev->dev.class = &nfc_class;
+ dev_set_name(&dev->dev, "nfc%d", dev->idx);
+ device_initialize(&dev->dev);
+
dev->ops = ops;
dev->supported_protocols = supported_protocols;
dev->tx_headroom = tx_headroom;
@@ -1077,6 +1089,11 @@ struct nfc_dev *nfc_allocate_device(stru
}
return dev;
+
+err_free_dev:
+ kfree(dev);
+
+ return ERR_PTR(rc);
}
EXPORT_SYMBOL(nfc_allocate_device);
@@ -1091,14 +1108,6 @@ int nfc_register_device(struct nfc_dev *
pr_debug("dev_name=%s\n", dev_name(&dev->dev));
- dev->idx = ida_simple_get(&nfc_index_ida, 0, 0, GFP_KERNEL);
- if (dev->idx < 0)
- return dev->idx;
-
- dev->dev.class = &nfc_class;
- dev_set_name(&dev->dev, "nfc%d", dev->idx);
- device_initialize(&dev->dev);
-
mutex_lock(&nfc_devlist_mutex);
nfc_devlist_generation++;
rc = device_add(&dev->dev);
@@ -1136,12 +1145,10 @@ EXPORT_SYMBOL(nfc_register_device);
*/
void nfc_unregister_device(struct nfc_dev *dev)
{
- int rc, id;
+ int rc;
pr_debug("dev_name=%s\n", dev_name(&dev->dev));
- id = dev->idx;
-
if (dev->rfkill) {
rfkill_unregister(dev->rfkill);
rfkill_destroy(dev->rfkill);
@@ -1166,8 +1173,6 @@ void nfc_unregister_device(struct nfc_de
nfc_devlist_generation++;
device_del(&dev->dev);
mutex_unlock(&nfc_devlist_mutex);
-
- ida_simple_remove(&nfc_index_ida, id);
}
EXPORT_SYMBOL(nfc_unregister_device);
--- a/net/nfc/nci/core.c
+++ b/net/nfc/nci/core.c
@@ -1084,8 +1084,7 @@ struct nci_dev *nci_allocate_device(stru
return ndev;
free_nfc:
- kfree(ndev->nfc_dev);
-
+ nfc_free_device(ndev->nfc_dev);
free_nci:
kfree(ndev);
return NULL;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Miaoqing Pan <[email protected]>
commit bde717ab473668377fc65872398a102d40cb2d58 upstream.
The hard coded register 0x9864 and 0x9924 are invalid
for ar9300 chips.
Signed-off-by: Miaoqing Pan <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -1815,8 +1815,6 @@ static void ar9003_hw_spectral_scan_wait
static void ar9003_hw_tx99_start(struct ath_hw *ah, u32 qnum)
{
REG_SET_BIT(ah, AR_PHY_TEST, PHY_AGC_CLR);
- REG_SET_BIT(ah, 0x9864, 0x7f000);
- REG_SET_BIT(ah, 0x9924, 0x7f00fe);
REG_CLR_BIT(ah, AR_DIAG_SW, AR_DIAG_RX_DIS);
REG_WRITE(ah, AR_CR, AR_CR_RXD);
REG_WRITE(ah, AR_DLCL_IFS(qnum), 0);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit bd7e31bbade02bc1e92aa00d5cf2cee2da66838a upstream.
gcc-7 suggests that an expression using a bitwise not and a bitmask
on a 'bool' variable is better written using boolean logic:
drivers/media/rc/imon.c: In function 'imon_incoming_scancode':
drivers/media/rc/imon.c:1725:22: error: '~' on a boolean expression [-Werror=bool-operation]
ictx->pad_mouse = ~(ictx->pad_mouse) & 0x1;
^
drivers/media/rc/imon.c:1725:22: note: did you mean to use logical not?
I agree.
Fixes: 21677cfc562a ("V4L/DVB: ir-core: add imon driver")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/rc/imon.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -1629,7 +1629,7 @@ static void imon_incoming_packet(struct
if (kc == KEY_KEYBOARD && !ictx->release_code) {
ictx->last_keycode = kc;
if (!nomouse) {
- ictx->pad_mouse = ~(ictx->pad_mouse) & 0x1;
+ ictx->pad_mouse = !ictx->pad_mouse;
dev_dbg(dev, "toggling to %s mode\n",
ictx->pad_mouse ? "mouse" : "keyboard");
spin_unlock_irqrestore(&ictx->kc_lock, flags);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Miaoqing Pan <[email protected]>
commit cf8ce1ea61b75712a154c93e40f2a5af2e4dd997 upstream.
One scenario that could lead to UAF is two threads writing
simultaneously to the "tx99" debug file. One of them would
set the "start" value to true and follow to ath9k_tx99_init().
Inside the function it would set the sc->tx99_state to true
after allocating sc->tx99skb. Then, the other thread would
execute write_file_tx99() and call ath9k_tx99_deinit().
sc->tx99_state would be freed. After that, the first thread
would continue inside ath9k_tx99_init() and call
r = ath9k_tx99_send(sc, sc->tx99_skb, &txctl);
that would make use of the freed sc->tx99_skb memory.
Signed-off-by: Miaoqing Pan <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath9k/tx99.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
--- a/drivers/net/wireless/ath/ath9k/tx99.c
+++ b/drivers/net/wireless/ath/ath9k/tx99.c
@@ -190,22 +190,27 @@ static ssize_t write_file_tx99(struct fi
if (strtobool(buf, &start))
return -EINVAL;
+ mutex_lock(&sc->mutex);
+
if (start == sc->tx99_state) {
if (!start)
- return count;
+ goto out;
ath_dbg(common, XMIT, "Resetting TX99\n");
ath9k_tx99_deinit(sc);
}
if (!start) {
ath9k_tx99_deinit(sc);
- return count;
+ goto out;
}
r = ath9k_tx99_init(sc);
- if (r)
+ if (r) {
+ mutex_unlock(&sc->mutex);
return r;
-
+ }
+out:
+ mutex_unlock(&sc->mutex);
return count;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Viresh Kumar <[email protected]>
commit 289d72afddf83440117c35d864bf0c6309c1d011 upstream.
After the lock is dropped, it is possible that the cpufreq_dev gets
freed before we call get_level() and that can cause kernel to crash.
Drop the lock after we are done using the structure.
Fixes: 02373d7c69b4 ("thermal: cpu_cooling: fix lockdep problems in cpu_cooling")
Signed-off-by: Viresh Kumar <[email protected]>
Reviewed-by: Lukasz Luba <[email protected]>
Tested-by: Lukasz Luba <[email protected]>
Signed-off-by: Eduardo Valentin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/thermal/cpu_cooling.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/thermal/cpu_cooling.c
+++ b/drivers/thermal/cpu_cooling.c
@@ -191,8 +191,10 @@ unsigned long cpufreq_cooling_get_level(
mutex_lock(&cooling_list_lock);
list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) {
if (cpumask_test_cpu(cpu, &cpufreq_dev->allowed_cpus)) {
+ unsigned long level = get_level(cpufreq_dev, freq);
+
mutex_unlock(&cooling_list_lock);
- return get_level(cpufreq_dev, freq);
+ return level;
}
}
mutex_unlock(&cooling_list_lock);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mauro Carvalho Chehab <[email protected]>
commit a16e37726c444cbda91e73ed5f742e717bfe866f upstream.
Gcc 7.1 complains about:
drivers/media/platform/s5p-jpeg/jpeg-core.c: In function 's5p_jpeg_parse_hdr.isra.9':
drivers/media/platform/s5p-jpeg/jpeg-core.c:1207:12: warning: 'width' may be used uninitialized in this function [-Wmaybe-uninitialized]
result->w = width;
~~~~~~~~~~^~~~~~~
drivers/media/platform/s5p-jpeg/jpeg-core.c:1208:12: warning: 'height' may be used uninitialized in this function [-Wmaybe-uninitialized]
result->h = height;
~~~~~~~~~~^~~~~~~~
Indeed the code would allow it to return a random value (although
it shouldn't happen, in practice). So, explicitly set both to zero,
just in case.
Acked-by: Andrzej Pietrasiewicz <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/platform/s5p-jpeg/jpeg-core.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/media/platform/s5p-jpeg/jpeg-core.c
+++ b/drivers/media/platform/s5p-jpeg/jpeg-core.c
@@ -1098,10 +1098,10 @@ static bool s5p_jpeg_parse_hdr(struct s5
struct s5p_jpeg_ctx *ctx)
{
int c, components = 0, notfound, n_dht = 0, n_dqt = 0;
- unsigned int height, width, word, subsampling = 0, sos = 0, sof = 0,
- sof_len = 0;
- unsigned int dht[S5P_JPEG_MAX_MARKER], dht_len[S5P_JPEG_MAX_MARKER],
- dqt[S5P_JPEG_MAX_MARKER], dqt_len[S5P_JPEG_MAX_MARKER];
+ unsigned int height = 0, width = 0, word, subsampling = 0;
+ unsigned int sos = 0, sof = 0, sof_len = 0;
+ unsigned int dht[S5P_JPEG_MAX_MARKER], dht_len[S5P_JPEG_MAX_MARKER];
+ unsigned int dqt[S5P_JPEG_MAX_MARKER], dqt_len[S5P_JPEG_MAX_MARKER];
long length;
struct s5p_jpeg_buffer jpeg_buffer;
On 07/25/2017 12:18 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.79 release.
> There are 83 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Jul 27 19:16:34 UTC 2017.
> Anything received after that time might be too late.
>
Build results:
total: 145 pass: 145 fail: 0
Qemu test results:
total: 115 pass: 115 fail: 0
Details are available at http://kerneltests.org/builders.
Guenter
On 07/25/2017 01:18 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.79 release.
> There are 83 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Jul 27 19:16:34 UTC 2017.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.79-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
On Tue, 2017-07-25 at 12:18 -0700, Greg Kroah-Hartman wrote:
> 4.4-stable review patch. If anyone has any objections, please let me know.
>
> ------------------
>
> From: Johan Hovold <[email protected]>
>
> commit 20777bc57c346b6994f465e0d8261a7fbf213a09 upstream.
[...]
> --- a/net/nfc/core.c
> +++ b/net/nfc/core.c
[...]
> @@ -1077,6 +1089,11 @@ struct nfc_dev *nfc_allocate_device(stru
> }
>
> return dev;
> +
> +err_free_dev:
> + kfree(dev);
> +
> + return ERR_PTR(rc);
> }
> EXPORT_SYMBOL(nfc_allocate_device);
[...]
But the callers expect a null pointer on error, not an error pointer.
This looks broken in mainline too.
Ben.
--
Ben Hutchings
Software Developer, Codethink Ltd.
On Tue, Aug 01, 2017 at 07:15:55PM +0100, Ben Hutchings wrote:
> On Tue, 2017-07-25 at 12:18 -0700, Greg Kroah-Hartman wrote:
> > 4.4-stable review patch. If anyone has any objections, please let me know.
> >
> > ------------------
> >
> > From: Johan Hovold <[email protected]>
> >
> > commit 20777bc57c346b6994f465e0d8261a7fbf213a09 upstream.
> [...]
> > --- a/net/nfc/core.c
> > +++ b/net/nfc/core.c
> [...]
> > @@ -1077,6 +1089,11 @@ struct nfc_dev *nfc_allocate_device(stru
> > }
> >
> > return dev;
> > +
> > +err_free_dev:
> > + kfree(dev);
> > +
> > + return ERR_PTR(rc);
> > }
> > EXPORT_SYMBOL(nfc_allocate_device);
> [...]
>
> But the callers expect a null pointer on error, not an error pointer.
> This looks broken in mainline too.
Indeed. Dan's checkers found this one quickly and I posted a fix on the
9th of July:
https://lkml.kernel.org/r/[email protected]
but it has unfortunately not been applied yet despite a reminder sent to
Samuel and Dave when Greg picked it up for stable ten days ago.
Perhaps it can go in through Andrew's tree if there's going to be
further delays (e.g. due to vacations)?
Thanks,
Johan
On Tue, 2017-07-25 at 12:19 -0700, Greg Kroah-Hartman wrote:
> 4.4-stable review patch. If anyone has any objections, please let me know.
>
> ------------------
>
> From: Seunghun Han <[email protected]>
>
> commit e708e35ba6d89ff785b225cd07dcccab04fa954a upstream.
>
> One of the rarely executed code pathes in check_timer() calls
> unmask_ioapic_irq() passing irq_get_chip_data(0) as argument.
>
> That's wrong as unmask_ioapic_irq() expects a pointer to the irq data of
> interrupt 0. irq_get_chip_data(0) returns NULL, so the following
> dereference in unmask_ioapic_irq() causes a kernel panic.
>
> The issue went unnoticed in the first place because irq_get_chip_data()
> returns a void pointer so the compiler cannot do a type check on the
> argument. The code path was added for machines with broken configuration,
> but it seems that those machines are either not running current kernels or
> simply do not longer exist.
>
> Hand in irq_get_irq_data(0) as argument which provides the correct data.
[...]
This just pushes the null dereference down into io_apic_modify_irq().
Maybe unmask_ioapic_irq() shouldn't be used here at all?
Ben.
--
Ben Hutchings
Software Developer, Codethink Ltd.