From: Tom Rix <[email protected]>
It is not necessary to have a xilinx- prefix on a file
when the file is in a xilinx/ subdir.
Signed-off-by: Tom Rix <[email protected]>
---
drivers/fpga/xilinx/Makefile | 4 ++--
drivers/fpga/xilinx/{xilinx-pr-decoupler.c => pr-decoupler.c} | 0
drivers/fpga/xilinx/{xilinx-spi.c => spi.c} | 0
3 files changed, 2 insertions(+), 2 deletions(-)
rename drivers/fpga/xilinx/{xilinx-pr-decoupler.c => pr-decoupler.c} (100%)
rename drivers/fpga/xilinx/{xilinx-spi.c => spi.c} (100%)
diff --git a/drivers/fpga/xilinx/Makefile b/drivers/fpga/xilinx/Makefile
index 7bb7543412790..4ac727d03e140 100644
--- a/drivers/fpga/xilinx/Makefile
+++ b/drivers/fpga/xilinx/Makefile
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_XILINX_PR_DECOUPLER) += xilinx-pr-decoupler.o
-obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += xilinx-spi.o
+obj-$(CONFIG_XILINX_PR_DECOUPLER) += pr-decoupler.o
+obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += spi.o
obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o
obj-$(CONFIG_FPGA_MGR_ZYNQMP_FPGA) += zynqmp-fpga.o
diff --git a/drivers/fpga/xilinx/xilinx-pr-decoupler.c b/drivers/fpga/xilinx/pr-decoupler.c
similarity index 100%
rename from drivers/fpga/xilinx/xilinx-pr-decoupler.c
rename to drivers/fpga/xilinx/pr-decoupler.c
diff --git a/drivers/fpga/xilinx/xilinx-spi.c b/drivers/fpga/xilinx/spi.c
similarity index 100%
rename from drivers/fpga/xilinx/xilinx-spi.c
rename to drivers/fpga/xilinx/spi.c
--
2.26.3
On Tue, Jun 08, 2021 at 09:25:51AM -0700, [email protected] wrote:
> From: Tom Rix <[email protected]>
>
> It is not necessary to have a xilinx- prefix on a file
> when the file is in a xilinx/ subdir.
>
> Signed-off-by: Tom Rix <[email protected]>
> ---
> drivers/fpga/xilinx/Makefile | 4 ++--
> drivers/fpga/xilinx/{xilinx-pr-decoupler.c => pr-decoupler.c} | 0
> drivers/fpga/xilinx/{xilinx-spi.c => spi.c} | 0
> 3 files changed, 2 insertions(+), 2 deletions(-)
> rename drivers/fpga/xilinx/{xilinx-pr-decoupler.c => pr-decoupler.c} (100%)
> rename drivers/fpga/xilinx/{xilinx-spi.c => spi.c} (100%)
>
> diff --git a/drivers/fpga/xilinx/Makefile b/drivers/fpga/xilinx/Makefile
> index 7bb7543412790..4ac727d03e140 100644
> --- a/drivers/fpga/xilinx/Makefile
> +++ b/drivers/fpga/xilinx/Makefile
> @@ -1,7 +1,7 @@
> # SPDX-License-Identifier: GPL-2.0
>
> -obj-$(CONFIG_XILINX_PR_DECOUPLER) += xilinx-pr-decoupler.o
> -obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += xilinx-spi.o
> +obj-$(CONFIG_XILINX_PR_DECOUPLER) += pr-decoupler.o
> +obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += spi.o
You just renamed the module to be called "spi.ko"????
Did you test this thing? You can not rename modules without good
reasons, and calling a device specific kernel module "spi.ko" is not ok.
greg k-h
On 6/9/21 2:59 AM, Greg KH wrote:
> On Tue, Jun 08, 2021 at 09:25:51AM -0700, [email protected] wrote:
>> From: Tom Rix <[email protected]>
>>
>> It is not necessary to have a xilinx- prefix on a file
>> when the file is in a xilinx/ subdir.
>>
>> Signed-off-by: Tom Rix <[email protected]>
>> ---
>> drivers/fpga/xilinx/Makefile | 4 ++--
>> drivers/fpga/xilinx/{xilinx-pr-decoupler.c => pr-decoupler.c} | 0
>> drivers/fpga/xilinx/{xilinx-spi.c => spi.c} | 0
>> 3 files changed, 2 insertions(+), 2 deletions(-)
>> rename drivers/fpga/xilinx/{xilinx-pr-decoupler.c => pr-decoupler.c} (100%)
>> rename drivers/fpga/xilinx/{xilinx-spi.c => spi.c} (100%)
>>
>> diff --git a/drivers/fpga/xilinx/Makefile b/drivers/fpga/xilinx/Makefile
>> index 7bb7543412790..4ac727d03e140 100644
>> --- a/drivers/fpga/xilinx/Makefile
>> +++ b/drivers/fpga/xilinx/Makefile
>> @@ -1,7 +1,7 @@
>> # SPDX-License-Identifier: GPL-2.0
>>
>> -obj-$(CONFIG_XILINX_PR_DECOUPLER) += xilinx-pr-decoupler.o
>> -obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += xilinx-spi.o
>> +obj-$(CONFIG_XILINX_PR_DECOUPLER) += pr-decoupler.o
>> +obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += spi.o
> You just renamed the module to be called "spi.ko"????
>
> Did you test this thing? You can not rename modules without good
> reasons, and calling a device specific kernel module "spi.ko" is not ok.
yes, this is a problem, I will drop the renaming patches.
Tom
> greg k-h
>
On Wed, Jun 09, 2021 at 06:27:05AM -0700, Tom Rix wrote:
>
> On 6/9/21 2:59 AM, Greg KH wrote:
> > On Tue, Jun 08, 2021 at 09:25:51AM -0700, [email protected] wrote:
> > > From: Tom Rix <[email protected]>
> > >
> > > It is not necessary to have a xilinx- prefix on a file
> > > when the file is in a xilinx/ subdir.
> > >
> > > Signed-off-by: Tom Rix <[email protected]>
> > > ---
> > > drivers/fpga/xilinx/Makefile | 4 ++--
> > > drivers/fpga/xilinx/{xilinx-pr-decoupler.c => pr-decoupler.c} | 0
> > > drivers/fpga/xilinx/{xilinx-spi.c => spi.c} | 0
> > > 3 files changed, 2 insertions(+), 2 deletions(-)
> > > rename drivers/fpga/xilinx/{xilinx-pr-decoupler.c => pr-decoupler.c} (100%)
> > > rename drivers/fpga/xilinx/{xilinx-spi.c => spi.c} (100%)
> > >
> > > diff --git a/drivers/fpga/xilinx/Makefile b/drivers/fpga/xilinx/Makefile
> > > index 7bb7543412790..4ac727d03e140 100644
> > > --- a/drivers/fpga/xilinx/Makefile
> > > +++ b/drivers/fpga/xilinx/Makefile
> > > @@ -1,7 +1,7 @@
> > > # SPDX-License-Identifier: GPL-2.0
> > > -obj-$(CONFIG_XILINX_PR_DECOUPLER) += xilinx-pr-decoupler.o
> > > -obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += xilinx-spi.o
> > > +obj-$(CONFIG_XILINX_PR_DECOUPLER) += pr-decoupler.o
> > > +obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += spi.o
> > You just renamed the module to be called "spi.ko"????
> >
> > Did you test this thing? You can not rename modules without good
> > reasons, and calling a device specific kernel module "spi.ko" is not ok.
>
> yes, this is a problem, I will drop the renaming patches.
So you didn't test these?
Again, why is this file movement necessary?