This patch-set add support for ADV7535 part in ADV7511 driver.
ADV7535 and ADV7533 are pin to pin compatible parts but ADV7535
support TMDS clock upto 148.5Mhz and resolutions up to 1080p@60Hz.
---
Changes in v4:
- get out ADV7533 v1p2 voltage selection of this patch set
- removal CONFIG_DRM_I2C_ADV7533 from Kconfig moved to new commit
Bogdan Togorean (3):
drm: bridge: adv7511: Remove DRM_I2C_ADV7533 Kconfig
drm: bridge: adv7511: Add support for ADV7535
dt-bindings: drm: bridge: adv7511: Add ADV7535 support
.../bindings/display/bridge/adi,adv7511.txt | 23 ++++++-----
drivers/gpu/drm/bridge/adv7511/Kconfig | 13 ++----
drivers/gpu/drm/bridge/adv7511/Makefile | 3 +-
drivers/gpu/drm/bridge/adv7511/adv7511.h | 40 +------------------
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 20 +++++-----
5 files changed, 26 insertions(+), 73 deletions(-)
--
2.24.1
This commit remove DRM_I2C_ADV7533 resulting a simpler driver and less
choices in Kconfig.
Signed-off-by: Bogdan Togorean <[email protected]>
---
drivers/gpu/drm/bridge/adv7511/Kconfig | 11 +-----
drivers/gpu/drm/bridge/adv7511/Makefile | 3 +-
drivers/gpu/drm/bridge/adv7511/adv7511.h | 39 --------------------
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 4 --
4 files changed, 3 insertions(+), 54 deletions(-)
diff --git a/drivers/gpu/drm/bridge/adv7511/Kconfig b/drivers/gpu/drm/bridge/adv7511/Kconfig
index 8a56ff81f4fb..a7fe07117345 100644
--- a/drivers/gpu/drm/bridge/adv7511/Kconfig
+++ b/drivers/gpu/drm/bridge/adv7511/Kconfig
@@ -4,8 +4,9 @@ config DRM_I2C_ADV7511
depends on OF
select DRM_KMS_HELPER
select REGMAP_I2C
+ select DRM_MIPI_DSI
help
- Support for the Analog Device ADV7511(W) and ADV7513 HDMI encoders.
+ Support for the Analog Device ADV7511(W)/13/33 HDMI encoders.
config DRM_I2C_ADV7511_AUDIO
bool "ADV7511 HDMI Audio driver"
@@ -15,14 +16,6 @@ config DRM_I2C_ADV7511_AUDIO
Support the ADV7511 HDMI Audio interface. This is used in
conjunction with the AV7511 HDMI driver.
-config DRM_I2C_ADV7533
- bool "ADV7533 encoder"
- depends on DRM_I2C_ADV7511
- select DRM_MIPI_DSI
- default y
- help
- Support for the Analog Devices ADV7533 DSI to HDMI encoder.
-
config DRM_I2C_ADV7511_CEC
bool "ADV7511/33 HDMI CEC driver"
depends on DRM_I2C_ADV7511
diff --git a/drivers/gpu/drm/bridge/adv7511/Makefile b/drivers/gpu/drm/bridge/adv7511/Makefile
index b46ebeb35fd4..d8ceb534b51f 100644
--- a/drivers/gpu/drm/bridge/adv7511/Makefile
+++ b/drivers/gpu/drm/bridge/adv7511/Makefile
@@ -1,6 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-only
-adv7511-y := adv7511_drv.o
+adv7511-y := adv7511_drv.o adv7533.o
adv7511-$(CONFIG_DRM_I2C_ADV7511_AUDIO) += adv7511_audio.o
adv7511-$(CONFIG_DRM_I2C_ADV7511_CEC) += adv7511_cec.o
-adv7511-$(CONFIG_DRM_I2C_ADV7533) += adv7533.o
obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511.o
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h b/drivers/gpu/drm/bridge/adv7511/adv7511.h
index 52b2adfdc877..12552d54931b 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
@@ -393,7 +393,6 @@ static inline int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511)
}
#endif
-#ifdef CONFIG_DRM_I2C_ADV7533
void adv7533_dsi_power_on(struct adv7511 *adv);
void adv7533_dsi_power_off(struct adv7511 *adv);
void adv7533_mode_set(struct adv7511 *adv, const struct drm_display_mode *mode);
@@ -402,44 +401,6 @@ int adv7533_patch_cec_registers(struct adv7511 *adv);
int adv7533_attach_dsi(struct adv7511 *adv);
void adv7533_detach_dsi(struct adv7511 *adv);
int adv7533_parse_dt(struct device_node *np, struct adv7511 *adv);
-#else
-static inline void adv7533_dsi_power_on(struct adv7511 *adv)
-{
-}
-
-static inline void adv7533_dsi_power_off(struct adv7511 *adv)
-{
-}
-
-static inline void adv7533_mode_set(struct adv7511 *adv,
- const struct drm_display_mode *mode)
-{
-}
-
-static inline int adv7533_patch_registers(struct adv7511 *adv)
-{
- return -ENODEV;
-}
-
-static inline int adv7533_patch_cec_registers(struct adv7511 *adv)
-{
- return -ENODEV;
-}
-
-static inline int adv7533_attach_dsi(struct adv7511 *adv)
-{
- return -ENODEV;
-}
-
-static inline void adv7533_detach_dsi(struct adv7511 *adv)
-{
-}
-
-static inline int adv7533_parse_dt(struct device_node *np, struct adv7511 *adv)
-{
- return -ENODEV;
-}
-#endif
#ifdef CONFIG_DRM_I2C_ADV7511_AUDIO
int adv7511_audio_init(struct device *dev, struct adv7511 *adv7511);
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index 9e13e466e72c..34df29d79e2b 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -1266,9 +1266,7 @@ static const struct i2c_device_id adv7511_i2c_ids[] = {
{ "adv7511", ADV7511 },
{ "adv7511w", ADV7511 },
{ "adv7513", ADV7511 },
-#ifdef CONFIG_DRM_I2C_ADV7533
{ "adv7533", ADV7533 },
-#endif
{ }
};
MODULE_DEVICE_TABLE(i2c, adv7511_i2c_ids);
@@ -1277,9 +1275,7 @@ static const struct of_device_id adv7511_of_ids[] = {
{ .compatible = "adi,adv7511", .data = (void *)ADV7511 },
{ .compatible = "adi,adv7511w", .data = (void *)ADV7511 },
{ .compatible = "adi,adv7513", .data = (void *)ADV7511 },
-#ifdef CONFIG_DRM_I2C_ADV7533
{ .compatible = "adi,adv7533", .data = (void *)ADV7533 },
-#endif
{ }
};
MODULE_DEVICE_TABLE(of, adv7511_of_ids);
--
2.24.1
ADV7535 is a part compatible with ADV7533 but it supports 1080p@60hz and
v1p2 supply is fixed to 1.8V
Signed-off-by: Bogdan Togorean <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
---
.../bindings/display/bridge/adi,adv7511.txt | 23 ++++++++++---------
1 file changed, 12 insertions(+), 11 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
index 2c887536258c..e8ddec5d9d91 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
@@ -1,10 +1,10 @@
-Analog Device ADV7511(W)/13/33 HDMI Encoders
+Analog Device ADV7511(W)/13/33/35 HDMI Encoders
-----------------------------------------
-The ADV7511, ADV7511W, ADV7513 and ADV7533 are HDMI audio and video transmitters
-compatible with HDMI 1.4 and DVI 1.0. They support color space conversion,
-S/PDIF, CEC and HDCP. ADV7533 supports the DSI interface for input pixels, while
-the others support RGB interface.
+The ADV7511, ADV7511W, ADV7513, ADV7533 and ADV7535 are HDMI audio and video
+transmitters compatible with HDMI 1.4 and DVI 1.0. They support color space
+conversion, S/PDIF, CEC and HDCP. ADV7533/5 supports the DSI interface for input
+pixels, while the others support RGB interface.
Required properties:
@@ -13,6 +13,7 @@ Required properties:
"adi,adv7511w"
"adi,adv7513"
"adi,adv7533"
+ "adi,adv7535"
- reg: I2C slave addresses
The ADV7511 internal registers are split into four pages exposed through
@@ -52,14 +53,14 @@ The following input format properties are required except in "rgb 1x" and
- bgvdd-supply: A 1.8V supply that powers up the BGVDD pin. This is
needed only for ADV7511.
-The following properties are required for ADV7533:
+The following properties are required for ADV7533 and ADV7535:
- adi,dsi-lanes: Number of DSI data lanes connected to the DSI host. It should
be one of 1, 2, 3 or 4.
- a2vdd-supply: 1.8V supply that powers up the A2VDD pin on the chip.
- v3p3-supply: A 3.3V supply that powers up the V3P3 pin on the chip.
- v1p2-supply: A supply that powers up the V1P2 pin on the chip. It can be
- either 1.2V or 1.8V.
+ either 1.2V or 1.8V for ADV7533 but only 1.8V for ADV7535.
Optional properties:
@@ -71,9 +72,9 @@ Optional properties:
- adi,embedded-sync: The input uses synchronization signals embedded in the
data stream (similar to BT.656). Defaults to separate H/V synchronization
signals.
-- adi,disable-timing-generator: Only for ADV7533. Disables the internal timing
- generator. The chip will rely on the sync signals in the DSI data lanes,
- rather than generate its own timings for HDMI output.
+- adi,disable-timing-generator: Only for ADV7533 and ADV7535. Disables the
+ internal timing generator. The chip will rely on the sync signals in the
+ DSI data lanes, rather than generate its own timings for HDMI output.
- clocks: from common clock binding: reference to the CEC clock.
- clock-names: from common clock binding: must be "cec".
- reg-names : Names of maps with programmable addresses.
@@ -85,7 +86,7 @@ Required nodes:
The ADV7511 has two video ports. Their connections are modelled using the OF
graph bindings specified in Documentation/devicetree/bindings/graph.txt.
-- Video port 0 for the RGB, YUV or DSI input. In the case of ADV7533, the
+- Video port 0 for the RGB, YUV or DSI input. In the case of ADV7533/5, the
remote endpoint phandle should be a reference to a valid mipi_dsi_host device
node.
- Video port 1 for the HDMI output
--
2.24.1
ADV7535 is a DSI to HDMI bridge chip like ADV7533 but it allows
1080p@60Hz. v1p2 is fixed to 1.8V on ADV7535.
Signed-off-by: Bogdan Togorean <[email protected]>
---
drivers/gpu/drm/bridge/adv7511/Kconfig | 4 ++--
drivers/gpu/drm/bridge/adv7511/adv7511.h | 1 +
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 16 +++++++++-------
3 files changed, 12 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/bridge/adv7511/Kconfig b/drivers/gpu/drm/bridge/adv7511/Kconfig
index a7fe07117345..47d4eb9e845d 100644
--- a/drivers/gpu/drm/bridge/adv7511/Kconfig
+++ b/drivers/gpu/drm/bridge/adv7511/Kconfig
@@ -6,7 +6,7 @@ config DRM_I2C_ADV7511
select REGMAP_I2C
select DRM_MIPI_DSI
help
- Support for the Analog Device ADV7511(W)/13/33 HDMI encoders.
+ Support for the Analog Device ADV7511(W)/13/33/35 HDMI encoders.
config DRM_I2C_ADV7511_AUDIO
bool "ADV7511 HDMI Audio driver"
@@ -17,7 +17,7 @@ config DRM_I2C_ADV7511_AUDIO
conjunction with the AV7511 HDMI driver.
config DRM_I2C_ADV7511_CEC
- bool "ADV7511/33 HDMI CEC driver"
+ bool "ADV7511/33/35 HDMI CEC driver"
depends on DRM_I2C_ADV7511
select CEC_CORE
default y
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h b/drivers/gpu/drm/bridge/adv7511/adv7511.h
index 12552d54931b..a9bb734366ae 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
@@ -320,6 +320,7 @@ struct adv7511_video_config {
enum adv7511_type {
ADV7511,
ADV7533,
+ ADV7535,
};
#define ADV7511_MAX_ADDRS 3
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index 34df29d79e2b..a275e6c91bd7 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -367,7 +367,7 @@ static void adv7511_power_on(struct adv7511 *adv7511)
*/
regcache_sync(adv7511->regmap);
- if (adv7511->type == ADV7533)
+ if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
adv7533_dsi_power_on(adv7511);
adv7511->powered = true;
}
@@ -387,7 +387,7 @@ static void __adv7511_power_off(struct adv7511 *adv7511)
static void adv7511_power_off(struct adv7511 *adv7511)
{
__adv7511_power_off(adv7511);
- if (adv7511->type == ADV7533)
+ if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
adv7533_dsi_power_off(adv7511);
adv7511->powered = false;
}
@@ -761,7 +761,7 @@ static void adv7511_mode_set(struct adv7511 *adv7511,
regmap_update_bits(adv7511->regmap, 0x17,
0x60, (vsync_polarity << 6) | (hsync_polarity << 5));
- if (adv7511->type == ADV7533)
+ if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
adv7533_mode_set(adv7511, adj_mode);
drm_mode_copy(&adv7511->curr_mode, adj_mode);
@@ -874,7 +874,7 @@ static int adv7511_bridge_attach(struct drm_bridge *bridge)
&adv7511_connector_helper_funcs);
drm_connector_attach_encoder(&adv->connector, bridge->encoder);
- if (adv->type == ADV7533)
+ if (adv->type == ADV7533 || adv->type == ADV7535)
ret = adv7533_attach_dsi(adv);
if (adv->i2c_main->irq)
@@ -952,7 +952,7 @@ static bool adv7511_cec_register_volatile(struct device *dev, unsigned int reg)
struct i2c_client *i2c = to_i2c_client(dev);
struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
- if (adv7511->type == ADV7533)
+ if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
reg -= ADV7533_REG_CEC_OFFSET;
switch (reg) {
@@ -994,7 +994,7 @@ static int adv7511_init_cec_regmap(struct adv7511 *adv)
goto err;
}
- if (adv->type == ADV7533) {
+ if (adv->type == ADV7533 || adv->type == ADV7535) {
ret = adv7533_patch_cec_registers(adv);
if (ret)
goto err;
@@ -1242,7 +1242,7 @@ static int adv7511_remove(struct i2c_client *i2c)
{
struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
- if (adv7511->type == ADV7533)
+ if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
adv7533_detach_dsi(adv7511);
i2c_unregister_device(adv7511->i2c_cec);
if (adv7511->cec_clk)
@@ -1267,6 +1267,7 @@ static const struct i2c_device_id adv7511_i2c_ids[] = {
{ "adv7511w", ADV7511 },
{ "adv7513", ADV7511 },
{ "adv7533", ADV7533 },
+ { "adv7535", ADV7535 },
{ }
};
MODULE_DEVICE_TABLE(i2c, adv7511_i2c_ids);
@@ -1276,6 +1277,7 @@ static const struct of_device_id adv7511_of_ids[] = {
{ .compatible = "adi,adv7511w", .data = (void *)ADV7511 },
{ .compatible = "adi,adv7513", .data = (void *)ADV7511 },
{ .compatible = "adi,adv7533", .data = (void *)ADV7533 },
+ { .compatible = "adi,adv7535", .data = (void *)ADV7535 },
{ }
};
MODULE_DEVICE_TABLE(of, adv7511_of_ids);
--
2.24.1
On 21.01.2020 09:27, Bogdan Togorean wrote:
> This commit remove DRM_I2C_ADV7533 resulting a simpler driver and less
> choices in Kconfig.
>
> Signed-off-by: Bogdan Togorean <[email protected]>
Reviewed-by: Andrzej Hajda <[email protected]>
--
Regards
Andrzej
On 21.01.2020 09:27, Bogdan Togorean wrote:
> ADV7535 is a DSI to HDMI bridge chip like ADV7533 but it allows
> 1080p@60Hz. v1p2 is fixed to 1.8V on ADV7535.
>
> Signed-off-by: Bogdan Togorean <[email protected]>
Reviewed-by: Andrzej Hajda <[email protected]>
--
Regards
Andrzej
On 21.01.2020 09:27, Bogdan Togorean wrote:
> ADV7535 is a part compatible with ADV7533 but it supports 1080p@60hz and
> v1p2 supply is fixed to 1.8V
>
> Signed-off-by: Bogdan Togorean <[email protected]>
> Reviewed-by: Laurent Pinchart <[email protected]>
Reviewed-by: Andrzej Hajda <[email protected]>
--
Regards
Andrzej
On 21/01/2020 09:27, Bogdan Togorean wrote:
> This patch-set add support for ADV7535 part in ADV7511 driver.
>
> ADV7535 and ADV7533 are pin to pin compatible parts but ADV7535
> support TMDS clock upto 148.5Mhz and resolutions up to 1080p@60Hz.
>
> ---
> Changes in v4:
> - get out ADV7533 v1p2 voltage selection of this patch set
> - removal CONFIG_DRM_I2C_ADV7533 from Kconfig moved to new commit
>
> Bogdan Togorean (3):
> drm: bridge: adv7511: Remove DRM_I2C_ADV7533 Kconfig
> drm: bridge: adv7511: Add support for ADV7535
> dt-bindings: drm: bridge: adv7511: Add ADV7535 support
>
> .../bindings/display/bridge/adi,adv7511.txt | 23 ++++++-----
> drivers/gpu/drm/bridge/adv7511/Kconfig | 13 ++----
> drivers/gpu/drm/bridge/adv7511/Makefile | 3 +-
> drivers/gpu/drm/bridge/adv7511/adv7511.h | 40 +------------------
> drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 20 +++++-----
> 5 files changed, 26 insertions(+), 73 deletions(-)
>
Applying to drm-misc-next with Andrzej's r-b, patchwork missed them...
Neil