2022-11-20 13:05:55

by Christophe JAILLET

[permalink] [raw]
Subject: [PATCH] interconnect: qcom: icc-rpmh: Fix an error handling path in qcom_icc_rpmh_probe()

If of_platform_populate() fails, some resources need to be freed as already
done in the other error handling paths.

Fixes: 57eb14779dfd ("interconnect: qcom: icc-rpmh: Support child NoC device probe")

Signed-off-by: Christophe JAILLET <[email protected]>
---
drivers/interconnect/qcom/icc-rpmh.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/interconnect/qcom/icc-rpmh.c b/drivers/interconnect/qcom/icc-rpmh.c
index fd17291c61eb..5168bbf3d92f 100644
--- a/drivers/interconnect/qcom/icc-rpmh.c
+++ b/drivers/interconnect/qcom/icc-rpmh.c
@@ -235,8 +235,11 @@ int qcom_icc_rpmh_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, qp);

/* Populate child NoC devices if any */
- if (of_get_child_count(dev->of_node) > 0)
- return of_platform_populate(dev->of_node, NULL, NULL, dev);
+ if (of_get_child_count(dev->of_node) > 0) {
+ ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
+ if (ret)
+ goto err;
+ }

return 0;
err:
--
2.34.1



2022-11-21 08:11:10

by Luca Weiss

[permalink] [raw]
Subject: Re: [PATCH] interconnect: qcom: icc-rpmh: Fix an error handling path in qcom_icc_rpmh_probe()

Hi Christophe,

On Sun Nov 20, 2022 at 1:35 PM CET, Christophe JAILLET wrote:
> If of_platform_populate() fails, some resources need to be freed as already
> done in the other error handling paths.
>
> Fixes: 57eb14779dfd ("interconnect: qcom: icc-rpmh: Support child NoC device probe")

I believe the same needs to be applied to icc-rpm.c.

Also there shouldn't be an empty line here between Fixes: and Signed-off-by:

Regards
Luca

>
> Signed-off-by: Christophe JAILLET <[email protected]>
> ---
> drivers/interconnect/qcom/icc-rpmh.c | 7 +++++--
> 1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/interconnect/qcom/icc-rpmh.c b/drivers/interconnect/qcom/icc-rpmh.c
> index fd17291c61eb..5168bbf3d92f 100644
> --- a/drivers/interconnect/qcom/icc-rpmh.c
> +++ b/drivers/interconnect/qcom/icc-rpmh.c
> @@ -235,8 +235,11 @@ int qcom_icc_rpmh_probe(struct platform_device *pdev)
> platform_set_drvdata(pdev, qp);
>
> /* Populate child NoC devices if any */
> - if (of_get_child_count(dev->of_node) > 0)
> - return of_platform_populate(dev->of_node, NULL, NULL, dev);
> + if (of_get_child_count(dev->of_node) > 0) {
> + ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
> + if (ret)
> + goto err;
> + }
>
> return 0;
> err:
> --
> 2.34.1


2022-11-21 21:14:38

by Christophe JAILLET

[permalink] [raw]
Subject: Re: [PATCH] interconnect: qcom: icc-rpmh: Fix an error handling path in qcom_icc_rpmh_probe()

Le 21/11/2022 à 08:42, Luca Weiss a écrit :
> Hi Christophe,
>
> On Sun Nov 20, 2022 at 1:35 PM CET, Christophe JAILLET wrote:
>> If of_platform_populate() fails, some resources need to be freed as already
>> done in the other error handling paths.
>>
>> Fixes: 57eb14779dfd ("interconnect: qcom: icc-rpmh: Support child NoC device probe")
>
> I believe the same needs to be applied to icc-rpm.c.

I'll give it a look and send a v2.

CJ

>
> Also there shouldn't be an empty line here between Fixes: and Signed-off-by:
>
> Regards
> Luca
>
>>
>> Signed-off-by: Christophe JAILLET <[email protected]>
>> ---
>> drivers/interconnect/qcom/icc-rpmh.c | 7 +++++--
>> 1 file changed, 5 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/interconnect/qcom/icc-rpmh.c b/drivers/interconnect/qcom/icc-rpmh.c
>> index fd17291c61eb..5168bbf3d92f 100644
>> --- a/drivers/interconnect/qcom/icc-rpmh.c
>> +++ b/drivers/interconnect/qcom/icc-rpmh.c
>> @@ -235,8 +235,11 @@ int qcom_icc_rpmh_probe(struct platform_device *pdev)
>> platform_set_drvdata(pdev, qp);
>>
>> /* Populate child NoC devices if any */
>> - if (of_get_child_count(dev->of_node) > 0)
>> - return of_platform_populate(dev->of_node, NULL, NULL, dev);
>> + if (of_get_child_count(dev->of_node) > 0) {
>> + ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
>> + if (ret)
>> + goto err;
>> + }
>>
>> return 0;
>> err:
>> --
>> 2.34.1
>
>


2022-11-22 22:07:57

by Christophe JAILLET

[permalink] [raw]
Subject: Re: [PATCH] interconnect: qcom: icc-rpmh: Fix an error handling path in qcom_icc_rpmh_probe()

Le 21/11/2022 à 08:42, Luca Weiss a écrit :
> Hi Christophe,
>
> On Sun Nov 20, 2022 at 1:35 PM CET, Christophe JAILLET wrote:
>> If of_platform_populate() fails, some resources need to be freed as already
>> done in the other error handling paths.
>>
>> Fixes: 57eb14779dfd ("interconnect: qcom: icc-rpmh: Support child NoC device probe")
>
> I believe the same needs to be applied to icc-rpm.c.

Their are other issues in the error handling path of this file.

1) if (desc->has_bus_pd) {
ret = dev_pm_domain_attach(dev, true);
is unbalanced, both in the error handling path and in the remove function.


2) clk_bulk_prepare_enable()
is not balanced in all error handling paths.


3) the same issue about error handling if of_platform_populate() fails.


These issues have been introduced in different commits.


Would you prefer several patches, each related to a given Fixes: tag, or
one bigger "fix all error handling paths"?


Anyway, fixing the points above would require moving some code around.
Usually I try to avoid it, because it is not always easy to see
associated side effects.

CJ

>
> Also there shouldn't be an empty line here between Fixes: and Signed-off-by:
>
> Regards
> Luca
>
>>
>> Signed-off-by: Christophe JAILLET <[email protected]>
>> ---
>> drivers/interconnect/qcom/icc-rpmh.c | 7 +++++--
>> 1 file changed, 5 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/interconnect/qcom/icc-rpmh.c b/drivers/interconnect/qcom/icc-rpmh.c
>> index fd17291c61eb..5168bbf3d92f 100644
>> --- a/drivers/interconnect/qcom/icc-rpmh.c
>> +++ b/drivers/interconnect/qcom/icc-rpmh.c
>> @@ -235,8 +235,11 @@ int qcom_icc_rpmh_probe(struct platform_device *pdev)
>> platform_set_drvdata(pdev, qp);
>>
>> /* Populate child NoC devices if any */
>> - if (of_get_child_count(dev->of_node) > 0)
>> - return of_platform_populate(dev->of_node, NULL, NULL, dev);
>> + if (of_get_child_count(dev->of_node) > 0) {
>> + ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
>> + if (ret)
>> + goto err;
>> + }
>>
>> return 0;
>> err:
>> --
>> 2.34.1
>
>

2022-11-23 08:06:36

by Luca Weiss

[permalink] [raw]
Subject: Re: [PATCH] interconnect: qcom: icc-rpmh: Fix an error handling path in qcom_icc_rpmh_probe()

Hi Christophe,

On Tue Nov 22, 2022 at 10:45 PM CET, Christophe JAILLET wrote:
> > I believe the same needs to be applied to icc-rpm.c.
>
> Their are other issues in the error handling path of this file.
>
> 1) if (desc->has_bus_pd) {
> ret = dev_pm_domain_attach(dev, true);
> is unbalanced, both in the error handling path and in the remove function.
>
>
> 2) clk_bulk_prepare_enable()
> is not balanced in all error handling paths.
>
>
> 3) the same issue about error handling if of_platform_populate() fails.
>
>
> These issues have been introduced in different commits.
>
>
> Would you prefer several patches, each related to a given Fixes: tag, or
> one bigger "fix all error handling paths"?

I don't really have an opinion on this, I guess if the issues were
introduced in different commits, make separate fixes?
If it's the wrong way somebody will tell you anyways ;)

Regards
Luca

>
>
> Anyway, fixing the points above would require moving some code around.
> Usually I try to avoid it, because it is not always easy to see
> associated side effects.
>
> CJ